unitronics V200-18-E2B Snap-In-Output-Modules
I-V200-18-E2B ixhuma ngqo ngemuva kwama-Unitronics OPLCs ahambisanayo, idale iyunithi ye-PLC eziqukathe ngokwayo enokulungiselelwa kwe-I/O kwasendaweni.
Izici
- Okokufaka kwedijithali okungu-16 okukodwa, okuhlanganisa okokufaka kwekhawunta okunesivinini esikhulu okungu-2, thayipha i-pnp/npn (umthombo/usinki)
- Imiphumela eyi-10 yokudlulisa ehlukanisiwe
- 4 okuhlukile okuphumayo kwe-pnp/npn (umthombo/usinki), okuhlanganisa okuphumayo okunesivinini esikhulu okungu-2
- 2 okokufaka kwe-analog
- 2 imiphumela ye-analog
Incazelo evamile
I-Snap-in I/O ixhuma ngqo ngemuva kwama-Unitronics PLCs ahambisanayo, idale iyunithi ye-PLC eziqukethwe ngokwayo enokumiswa kwe-I/O yendawo. Imihlahlandlela Yokufaka enemininingwane equkethe imidwebo yezintambo ye-I/O yalawa mamodeli, ukucaciswa kobuchwepheshe, kanye nemibhalo eyengeziwe kutholakala Kulabhulali Yezobuchwepheshe ku-Unitronics. webindawo: https://unitronicsplc.com/support-technical-library/
Izimpawu Zesexwayiso kanye Nemikhawulo Ejwayelekile
Uma kuvela noma yiziphi izimpawu ezilandelayo, funda ulwazi oluhlobene nalo ngokucophelela.
Uphawu/Incazelo/Incazelo
Ingozi: Ingozi ekhonjiwe idala ukulimala ngokomzimba kanye nempahla.
Isexwayiso: Ingozi ekhonjiwe ingadala umonakalo emzimbeni kanye nempahla.
Isexwayiso: Qaphela.
- Ngaphambi kokusebenzisa lo mkhiqizo, umsebenzisi kufanele afunde futhi aqonde lo mbhalo.
- Konke exampi-les nemidwebo kuhloswe ngayo ukusiza ukuqonda, futhi akuqinisekisi ukusebenza. I-Unitronics ayiwamukeli umthwalo wemfanelo wokusetshenziswa kwangempela kwalo mkhiqizo ngokusekelwe kulawa exampLes.
- Sicela ulahle lo mkhiqizo ngokuya ngamazinga nemithetho kazwelonke yendawo nekazwelonke.
- Izisebenzi zesevisi eziqeqeshiwe kuphela okufanele zivule lolu cingo noma zilungise.
- Ukwehluleka ukuthobela izinkombandlela zokuphepha ezifanele kungabangela ukulimala okukhulu noma ukulimala kwempahla.
- Ungazami ukusebenzisa le divayisi ngemingcele eyeqa amazinga avunyelwe.
- Ukuze ugweme ukulimaza isistimu, ungaxhumeki/unqamule idivayisi uma amandla avuliwe.
Ukucatshangelwa Kwemvelo
Ungafaki ezindaweni: ezinothuli oluningi noma oluguquguqukayo, igesi ebolayo noma evuthayo, umswakama noma imvula, ukushisa okweqile, ukushaqeka okujwayelekile noma ukudlidliza okukhulu, ngokuvumelana nezindinganiso ezinikezwe eshidini lezicaciso zobuchwepheshe zomkhiqizo.
- Ungawabeki emanzini noma uvumele amanzi avuzele eyunithi.
- Ungavumeli imfucumfucu iwele ngaphakathi kweyunithi phakathi nokufakwa.
- Ukungenisa umoya: 10mm isikhala esidingekayo phakathi konqenqema lwesilawuli phezulu/phansi nezindonga ezivalekile.
- Faka ebangeni eliphezulu ukusuka ku-high-voltagizintambo ze-e kanye nempahla yamandla.
Ukuhambisana kwe-UL
Isigaba esilandelayo sihambisana nemikhiqizo ye-Unitronics esohlwini lwe-UL.
Amamodeli alandelayo: I-V200-18-E1B, V200-18-E2B, V200-18-E6B, V200-18-E6BL zifakwe kuhlu lwe-UL Lwezindawo Eziyingozi.
Amamodeli alandelayo: V200-18-E1B, V200-18-E2B, V200-18-E3B, V200-18-E3XB, V200-18-E46B, V200-18-E46BL, V200-18-E4B, V200-18-E4XB, V200-18-E5B, V200-18-E6B, V200-18-E6BL,
I-V200-18-ECB, V200-18-ECXB, V200-18-ESB zifakwe kuhlu lwe-UL Lendawo Ejwayelekile.
Izilinganiso ze-UL, Izilawuli Ezihlelekayo ezizosetshenziswa Ezindaweni Eziyingozi, Ikilasi I, Isigaba 2, Amaqembu A, B, C kanye no-D
Lawa manothi okukhishwa ahlobene nayo yonke imikhiqizo ye-Unitronics enezimpawu ze-UL ezisetshenziselwa ukumaka imikhiqizo egunyazwe ukusetshenziswa ezindaweni eziyingozi, Ikilasi I, Isigaba 2, Amaqembu A, B, C kanye no-D.
Isexwayiso: Lo mshini ulungele ukusetshenziswa Ekilasini I, Isigaba 2, Amaqembu A, B, C kanye no-D, noma ezindaweni ezingezona eziyingozi kuphela.
- Izintambo zokufaka nokuphumayo kufanele zihambisane nezindlela zokufaka izintambo zeSigaba I, isigaba 2 futhi ngokuhambisana negunya elinegunya.
- ISEXWAYISO—Ingozi Yokuqhuma—ukushintsha izingxenye kungase kukhinyabeze ukufaneleka Kwekilasi I, Isigaba 2.
- ISEXWAYISO – INGOZI YOKUQHUBEKA – Ungaxhumi noma unqamule amathuluzi ngaphandle uma ugesi ucishiwe noma indawo yaziwa ngokuthi ayinabungozi.
- ISEXWAYISO - Ukuchayeka kwamanye amakhemikhali kungase kwehlise izinga lokuvala le nto esetshenziswa kuma-Relay.
- Lo mshini kufanele ufakwe kusetshenziswa izindlela zokufaka izintambo njengoba kudingeka ku-Class I, Division 2 ngokwe-NEC kanye/noma i-CEC.
Izilinganiso Zokumelana Nokukhipha Okudluliselweyo: Imikhiqizo ebhalwe ngezansi iqukethe okuphumayo kwe-relay: V200-18-E1B, V200-18-E2B.
- Uma le mikhiqizo ethile isetshenziswa ezindaweni eziyingozi, ikalwa ku-3A res, lapho le mikhiqizo ethile isetshenziswa ezimeni zemvelo ezingenabungozi, ikalwa ku-5A res, njengoba inikezwe ekucacisweni komkhiqizo.
Ukufaka / Ukukhipha i-Snap-in I/O Module
Ifaka i-Snap-in I/O Module
Ungakwazi ukufaka i-Snap-in I/O Module kokubili ngaphambi nangemuva kokukhweza isilawuli.
- Vala amandla ngaphambi kokufaka amamojula e-I/O.
Qaphela: ikepisi elivikelayo elimboza isixhumi se-I/O esiboniswe emfanekisweni ohambisana nalesi sihloko. Lesi sivalo kufanele simboze isixhumi noma nini lapho i-Snap-in I/O Module inganamathiselwe kusilawuli. Kufanele ususe le cap ngaphambi kokufaka imojuli.
- Susa isivalo usebenzisa i-screwdriver.
- Layisha imihlahlandlela eyindilinga kusilawuli kanye nemihlahlandlela ekumojuli njengoba kukhonjisiwe ngezansi.
- Faka ingcindezi elinganayo kuwo wonke amakhona angu-4 uze uzwe 'ukuchofoza' okuhlukile.
Imojula isifakiwe manje. Hlola ukuthi zonke izinhlangothi namakhona kubekwe ngendlela efanele yini.
Okokufaka i-I0, i-I1, ne-I2, i-I3 ingasetshenziswa njengezifaki khodi ze-shaft njengoba kuboniswe ngezansi
Isusa i-Snap-in I/O Module
- Cindezela izinkinobho ezinhlangothini zemojuli bese uzibamba phansi ukuze uvule indlela yokukhiya.
- Gcwalisa kancane imojuli ukusuka ohlangothini ukuya kwelinye, wenza lula imojuli ukusuka kusilawuli.
- Faka esikhundleni ikepisi yokuvikela kusixhumi.
Izintambo
- Ungazithinti izintambo ezibukhoma.
- Lesi sixhobo siklanyelwe ukusebenza kuphela ezindaweni ze-SELV/PELV/Class 2/Limited Power.
- Zonke izinto ezinikezwa amandla ohlelweni kufanele zifake ukufakwa kabili. Okuphumayo kokunikezwa kwamandla kumele kukalwe njenge-SELV/PELV/Class
2/Amandla Alinganiselwe. - Ungaxhumi isignali 'Emaphakathi noma 'Yomugqa' ye-110/220VAC kuphinikhodi ye-0V yedivayisi.
- Yonke imisebenzi yokufaka izintambo kufanele yenziwe ngenkathi amandla EVALIWE.
- Sebenzisa ukuvikela kwamanje, okufana ne-fuse noma i-circuit breaker, ukuze ugweme amaza amaningi endaweni yokuxhuma amandla.
- Amaphoyinti angasetshenzisiwe akufanele axhunywe (ngaphandle uma kucaciswe ngenye indlela). Ukuziba lesi siqondiso kungase kulimaze idivayisi.
- Hlola kabili zonke izintambo ngaphambi kokuvula ugesi.
- Ukuze ugweme ukulimaza ucingo, ungeqi i-torque enkulu:
- Izilawuli ezinikeza ibhulokhi yetheminali enephimbo elingu-5mm: 0.5 N·m (5 kgf·cm).
- Abalawuli abanikeza ibhulokhi yetheminali enephimbo elingu-3.81mm f 0.2 N·m (2 kgf·cm).
- Ungasebenzisi ithini, i-solder, nanoma iyiphi into ocingweni olukhumuliwe olungase lunqamuke umucu wocingo.
- Faka ebangeni eliphezulu ukusuka ku-high-voltagizintambo ze-e kanye nempahla yamandla.
Inqubo yokufaka izintambo
Sebenzisa amatheminali e-crimp ukuze uthole izintambo
- Izilawuli ezinikeza ibhulokhi yetheminali enephimbo elingu-5mm: intambo engu-26-12 AWG (0.13 mm2 –3.31 mm2).
- Izilawuli ezinikeza ibhulokhi yetheminali enephimbo elingu-3.81mm: intambo engu-26-16 AWG (0.13 mm2 – 1.31 mm2).
- Hlikihla ucingo lube ubude obungu-7±0.5mm (0.270–0.300“).
- Khipha itheminali endaweni yayo ebanzi kakhulu ngaphambi kokufaka intambo.
- Faka intambo ngokuphelele kutheminali ukuze uqinisekise uxhumano olufanele.
- Qinisa ngokwanele ukugcina intambo ingadonsi mahhala.
Imihlahlandlela yezintambo
- Sebenzisa amapayipi ezintambo ahlukene eqenjini ngalinye kulawa alandelayo:
- Iqembu 1: I-vol ephansitage I/O kanye nemigqa yokuhlinzeka, izintambo zokuxhumana.
- Iqembu 2: I-vol ephezulutage Imigqa, ivolumu ephansitagimigqa enomsindo efana nemiphumela yomshayeli wemoto.
Hlukanisa la maqembu okungenani ngo-10cm (4″). Uma lokhu kungenzeki, weqa imigudu nge-engeli engu-90˚.
- Ngokusebenza kahle kwesistimu, wonke amaphoyinti angu-0V ohlelweni kufanele axhunywe kumzila wesitimela wesistimu 0V.
- Amadokhumenti aqondene nomkhiqizo kufanele afundwe ngokugcwele futhi aqondwe ngaphambi kokwenza noma yiziphi izintambo.
Vumela ivolumutagUkuphazamiseka kwe-e nomsindo nemigqa yokufaka esetshenziswa ebangeni elinwetshiwe. Sebenzisa intambo enosayizi ofanele wokulayisha.
Ukuhlanza umkhiqizo
Ukuze ukwandise ukusebenza kwesistimu, gwema ukuphazamiseka kwe-electromagnetic ngale ndlela elandelayo:
- Sebenzisa ikhabethe lensimbi.
- xhuma i-0V kanye namaphoyinti aphansi asebenzayo (uma ekhona) ngqo emhlabathini wohlelo.
- Sebenzisa okufushane kakhulu, okungaphansi kuka-1m (3.3 ft.) nokujiya kakhulu, 2.08mm² (14AWG) min, izintambo ezingaba khona.
Okokufaka Kwedijithali
- Iqembu ngalinye lama-inputs angu-8 linezimpawu ezimbili ezivamile. Iqembu ngalinye lingasetshenziswa njenge-pnp (umthombo) noma i-npn (usinki), uma kunezintambo ezifanele njengoba kuboniswe kwizibalo ezilandelayo.
- Okokufaka kwe-I0 ne-I2 kungasetshenziswa njengokufakwayo okujwayelekile kwedijithali, njengezibali zesivinini esikhulu, noma njengengxenye yesishumeki se-shaft.
- Okokufaka kwe-I1 ne-I3 kungasetshenziswa njengokufakwayo okujwayelekile kwedijithali, njengokusetha kabusha izinto zokubala ezinesivinini esikhulu, noma njengengxenye yesishumeki se-shaft.
- Izimpawu ezijwayelekile zeqembu ngalinye zifushaniswa ngaphakathi kusixhumi ngasinye.
Okokufaka i-I0, i-I1, ne-I2, i-I3 ingasetshenziswa njengezifaki khodi ze-shaft njengoba kuboniswe ngezansi.
Imiphumela Yedijithali
Izimpahla Zamandla Ezintambo
- Xhuma intambo “enhle” kutheminali ethi “V1” ukuze uthole okukhiphayo, kutheminali ethi “V2” kokuphumayo kwe-transistor.
- Kuzo zombili izimo, xhuma umkhondo “ongalungile” kutheminali ethi “0V” yeqembu ngalinye lokukhiphayo.
- Uma kwenzeka voltage ukuguquguquka noma ukungavumelani nevolumutage ukucaciswa kokunikezwa kwamandla, xhuma idivayisi ekunikezeni amandla okulawulwayo.
- Ungaxhumi isignali 'Yokumaphakathi' noma 'Yolayini' ye-110/220VAC kuphinikhodi ye-0V yedivayisi.
Imiphumela yokudluliswa
- Isignali engu-0V yokuphumayo kwe-relay ihlukanisiwe kusignali engu-0V yesilawuli.
Ukwandisa Isikhathi Sokuphila Sokuxhumana
Ukuze ukhuphule ubude besikhathi sempilo yabathintana nabo abaphumayo futhi uvikele idivayisi emonakalweni ongase ube khona nge-EMF ehlehlayo, xhuma:
- a clamping diode ngokuhambisana nomthwalo ngamunye we-DC ongenisayo,
- isekethe ye-RC snubber ngokuhambisana nomthwalo ngamunye we-AC ongenisayo.
Imiphumela ye-Transistor
- Okukhiphayo ngakunye kungenziwa ngezintambo ngokwehlukana njenge-npn noma i-pnp.
- Isignali engu-0V yemiphumela ye-transistor ihlukanisiwe kusignali ye-0V yesilawuli.
Okokufaka kwe-Analog
- Izihlangu kufanele zixhunywe emthonjeni wesignali.
- Okokufaka kungase kuxhunywe ngentambo ukuze kusebenze ngokwamanje noma ngevolumutage.
- Qaphela ukuthi isignali ye-analog ye-0V kufanele ibe yi-0V efanayo esetshenziswa ukunikezwa kwamandla kwesilawuli.
Imiphumela ye-Analog
Ukufaka Amandla Okuphumayo kwe-Analog
- Xhuma ikhebula “positive” kutheminali ethi “+V”, kanye nethi “negative” kutheminali ethi “0V”.
- Isignali ye-analog 0V kufanele ibe yi-0V efanayo esetshenziswa amandla esilawuli.
- Ugesi ongahlukanisiwe ungasetshenziswa uma nje isignali engu-0V ixhunywe ku-chassis.
- Ungaxhumi isignali 'Yokumaphakathi' noma 'Yolayini' ye-110/220VAC kuphinikhodi ye-0V yedivayisi.
- Uma kwenzeka voltage ukuguquguquka noma ukungavumelani nevolumutage ukucaciswa kokunikezwa kwamandla, xhuma idivayisi ekunikezeni amandla okulawulwayo.
ISEXWAYISO: Ukunikezwa kwamandla kwe-24VDC kufanele kuvulwe futhi kucishwe kanyekanye nokuphakelwa kwamandla kwesilawuli.
I-Output Wiring
- Izihlangu kufanele zenziwe umhlabathi, zixhunywe emhlabeni wekhabhinethi.
- Okuphumayo kungenziwa ngentambo kuya ku-current noma ku-voltage.
- Ungasebenzisi i-current ne-voltage kusuka esiteshini somthombo ofanayo.
| I-V200-18-E2B Imininingwane Yobuchwepheshe | |
| Okokufaka Kwedijithali | |
| Inombolo yokokufaka | 16 (ngamaqembu amabili) |
| Uhlobo lokokufaka | pnp (umthombo) noma i-npn (usinki), isethwe ngezintambo. |
| Ukuhlukaniswa kwe-galvanic | Yebo |
| Okokufaka okuzenzakalelayo voltage | 24VDC |
| Okokufaka ivoltage | |
| pnp (umthombo) | I-0-5VDC ye-Logic '0'
I-17-28.8VDC ye-Logic '1' |
| npn (usinki) | 17-28.8VDC ye-Logic '0' 0-5VDC ye-Logic '1' |
| Okokufaka kwamanje | 6mA@24VDC okokufaka #4 kuya ku-#15
8.8mA@24VDC okokufaka #0 kuya ku-#3 |
| Isikhathi sokuphendula | 10mSec ejwayelekile |
| Okokufaka kwesivinini esikhulu | Imininingwane engezansi iyasebenza. Bheka Amanothi 1 no-2. |
| Isixazululo | 32-bit |
| Imvamisa | 10kHz esiphezulu |
| Ububanzi be-pulse obuncane | 40μs |
| Amanothi: | |
| 1. Okokufaka #0 kanye no-#2 kungasebenza ngakunye njengesibali sesivinini esikhulu noma njengengxenye yesishumeki se-shaft. Esimeni ngasinye, imininingwane yokufaka yesivinini esiphezulu iyasebenza. Uma kusetshenziswa okokufaka kwedijithali okujwayelekile, kuyasebenza izicaciso ezijwayelekile zokufakwayo.
2. Okokufaka #1 kanye no-#3 kungasebenza ngakunye njengokusethwa kabusha kwekhawunta, noma njengokufakwayo okuvamile kwedijithali; kunoma yikuphi, ukucaciswa kwayo kungokokufaka kwedijithali okujwayelekile. Lokhu okokufaka kungase futhi kusetshenziswe njengengxenye yesishumeki se-shaft. Kulesi simo, imininingwane yokufaka yesivinini esiphezulu iyasebenza. |
|
| Imiphumela yokudluliswa | |
| Inani lokuphumayo | 10. Bheka Inothi 3. |
| Uhlobo lokukhiphayo | I-SPST-NO relay (Ifomu A) |
| Ukuzihlukanisa | Ngokudlulisela |
| Uhlobo lokudlulisela | I-Panasonic JQ1AP-24V, noma ehambisanayo |
| Okukhiphayo okwamanje | 5A umkhawulo (umthwalo ophikisayo).
8Isilinganiso esiphezulu sesignali evamile. Bheka Inothi 3. |
| Kulinganiswe ngo-voltage | 250VAC / 30VDC |
| Ubuncane bomthwalo | 1mA@5VDC |
| Iminyaka yokuphila | Imisebenzi engu-50k ngomthwalo omkhulu |
| Isikhathi sokuphendula | 10mS (okujwayelekile) |
| Ukuvikelwa kothintana naye | Kudingeka izinyathelo zokuphepha zangaphandle . Bheka Ukwandisa Isikhathi Sokuphila Sokuxhumana, ikhasi 5. |
| Ukunikezwa kwamandla okukhiphayo | |
| Okuzisholo ukusebenza voltage | 24VDC |
| I-vol esebenzayotage | 20.4 ukuze 28.8VDC |
| Ubukhulu. ukusetshenziswa kwamanje | 90mA@24VDC |
| Amanothi: | |
| 3. Okukhiphayo #1, #2, #3, kanye no-#4 abelana ngesignali evamile. Yonke eminye imiphumela inoxhumana nabo ngabanye. | |
| Imiphumela ye-Transistor | |
| Inani lokuphumayo | 4. Intambo ngayinye ingafakwa njenge-pnp (umthombo) noma i-npn (usinki). |
| Uhlobo lokukhiphayo | pnp: P-MOSFET (i-drain evulekile) npn: umqoqi ovulekile |
| Ukuhlukaniswa kwe-galvanic | Yebo |
| Okukhiphayo okwamanje | pnp: 0.5A umkhawulo (okukhiphayo ngakunye)
Inani lamanje: 2A umkhawulo (iqembu ngalinye) npn: 50mA umkhawulo (okukhiphayo ngakunye) Isamba samanje: 150mA esiphezulu (iqembu ngalinye) |
| Imvamisa enkulu | 20Hz (umthwalo ophikisayo) 0.5Hz (umthwalo ongenayo) |
| Isivinini esiphezulu sokuphuma kwemvamisa (umthwalo ophikisayo). | pnp: 2kHz npn: 50kHz |
| ON voltage kwehle | pnp: 0.5VDC esiphezulu npn: 0.85VDC esiphezulu Bona Inothi 4 |
| Ukuvikelwa kwesifunda esifushane | Yebo (pnp kuphela) |
| Ukunikezwa kwamandla kagesi | |
| ivolumu yokusebenzatage | 20.4 ukuze 28.8VDC |
| umthamo wokusebenza okujwayelekiletage | 24VDC |
| npn (usinki) ukunikezwa kwamandla | |
| ivolumu yokusebenzatage | 3.5V ukuya ku-28.8VDC,
ezingahlobene nevolumutage yemojuli ye-I/O noma yesilawuli |
| Amanothi: | |
| 4. Okukhiphayo #12 kanye Nokukhiphayo #13 kungasetshenziswa njengokuphumayo kwesivinini esikhulu | |
| Okokufaka kwe-Analog | |
| Inombolo yokokufaka | 2 (okukodwa) |
| Ibanga lokokufaka | 0-10V, 0-20mA , 4-20mA. Bheka Inothi 5. |
| Indlela yokuguqula | Ukulinganisa okulandelanayo |
| Ukulungiswa (ngaphandle kokungu-4-20mA) | 10-bit (1024 amayunithi) |
| Ukulungiswa ku-4-20mA | 204 kuya ku-1023 (820 amayunithi) |
| Isikhathi sokuguqulwa | Kuvunyelaniswe ukuze kuskenwe isikhathi |
| I-impedance yokokufaka | >100KΩ—voltage
500Ω—okwamanje |
| Ukuhlukaniswa kwe-galvanic | Lutho |
| Isilinganiso esiphezulu ngokuphelele | ±15V—voltage
±30mA—okwamanje |
| Iphutha lesikali esigcwele | ±2 LSB (0.2%) |
| Iphutha lomugqa | ±2 LSB (0.2%) |
| Imiphumela ye-Analog | |
| Inani lokuphumayo | 2 (okukodwa) |
| Ibanga lokukhipha | 0-10V, 0-20mA, 4-20mA. Bheka Inothi 5. |
| Ukulungiswa (ngaphandle kokuthi 4-20mA) Ukulungiswa kokuthi 4-20mA | 12-bit (4096 amayunithi)
819 kuya ku-4095 (3277 amayunithi) |
| Isikhathi sokuguqulwa | Kuvunyelaniswe ukuze kuskenwe isikhathi. |
| Layisha impedance | 1kΩ ubuncane—ivolumutage
500Ω umkhawulo—okwamanje |
| Ukuhlukaniswa kwe-galvanic | Lutho |
| Iphutha lomugqa | ±0.1% |
| Imikhawulo yamaphutha okusebenza | ±0.2% |
| Amanothi: | |
| 5. Qaphela ukuthi ububanzi be-I/O ngayinye buchazwa kokubili ngezintambo nangaphakathi kwesofthiwe yesilawuli. | |
| Ezemvelo | IP20 / NEMA1 |
| Izinga lokushisa lokusebenza | 0° ukuya ku-50°C (32° ukuya ku-122°F) |
| Izinga lokushisa lesitoreji | -20° ukuya ku-60° C (-4° ukuya ku-140°F) |
| Umswakamo Ohlobene (RH) | 5% kuya ku-95% (okungafinyeleli) |
|
Ubukhulu |
|
| Usayizi (WxHxD) | 138x23x123mm (5.43×0.9×4.84”) |
| Isisindo | 231g (8.13 oz) |
Ulwazi olukulo mbhalo lubonisa imikhiqizo ngosuku lokuphrinta. I-Unitronics igodla ilungelo, kuncike kuyo yonke imithetho esebenzayo, nganoma yisiphi isikhathi, ngokubona kwayo kuphela, futhi ngaphandle kwesaziso, lokuyeka noma ukushintsha izici, imiklamo, izinto zokwakha kanye neminye imininingwane yemikhiqizo yayo, kanye nokuhoxisa unomphela noma okwesikhashana noma yikuphi abashiye emakethe.
Lonke ulwazi olukule dokhumenti lunikezwa “njengoba lunjalo” ngaphandle kwewaranti yanoma yiluphi uhlobo, evezwayo noma eshiwo, kuhlanganisa kodwa kungagcini kunoma yiziphi iziqinisekiso ezisikiselwayo zokuthengiselana, ukufaneleka kwenjongo ethile, noma ukungaphuli umthetho. I-Unitronics ayithwesi icala ngamaphutha noma ukweqiwa kolwazi olwethulwe kulo mbhalo. Akukho mcimbi lapho i-Unitronics izobophezeleka khona nganoma yimuphi umonakalo okhethekile, wengozi, ongaqondile noma umphumela wanoma yiluphi uhlobo, noma yimuphi umonakalo ovela ngenxa noma ohlobene nokusetshenziswa noma ukwenziwa kwalolu lwazi.
Amagama okuhweba, izimpawu zokuhweba, amalogo kanye nezimpawu zesevisi ezivezwe kulo mbhalo, kuhlanganisa nokwakheka kwazo, kuyimpahla ye-Unitronics (1989) (R”G) Ltd. noma ezinye izinkampani zangaphandle futhi awuvunyelwe ukuzisebenzisa ngaphandle kwemvume ebhalwe ngaphambili. ze-Unitronics noma umuntu wesithathu ongase abe ngabanikazi bazo
Amadokhumenti / Izinsiza
 |
unitronics V200-18-E2B Snap-In-Output-Modules [pdf] Umhlahlandlela Womsebenzisi I-V200-18-E2B Amamojula Wokokufaka we-Snap-In-Output, i-V200-18-E2B, amamojula okokufaka we-Snap-In, amamojula okokufaka-Okukhiphayo, amamojula |
