Nā mea hana PCE PCE-EMD 5 Hōʻike Nui
Nā ʻōlelo hoʻohana huahana
Palapala Palekana
E ʻoluʻolu e heluhelu pono i ka manual mea hoʻohana ma mua o ka hoʻohana ʻana i ka hāmeʻa no ka manawa mua. Pono e hoʻohana wale ʻia ka mea hana e nā limahana kūpono a pono e hana ʻia nā hoʻoponopono e nā limahana PCE Instruments. ʻO ka hahai ʻole ʻana i ka manual hiki ke hopena i ka pōʻino a i ʻole nā ʻeha i uhi ʻole ʻia e ka palapala hoʻokō.
Hoʻokomo
E hahai i nā kiʻi wili i hāʻawi ʻia ma ka manual no ka hoʻokomo ʻana i ka sensor. E hōʻoia i nā hoʻopili uwea kūpono a me ka hoʻonohonoho ʻana i ka torque ma ke kaula hope. E kau pono i ka sensor e like me nā ana i kuhikuhi ʻia.
Hoʻolālikelike
E nānā i ka pauku 8 o ka manual no nā ʻōlelo kuhikuhi. Pono ka calibration maʻamau no ka mālama ʻana i nā heluhelu pololei.
ʻIke pili
Inā he nīnau kāu a makemake paha i ke kōkua, e kelepona iā PCE Instruments ma nā kikoʻī pili i hāʻawi ʻia ma ka pauku 9 o ka manual.
Holoi
I ka wā e hoʻokuʻu ai i ka huahana, e hahai i nā alakaʻi ma ka pauku 10 o ka manual e hōʻoia i ka hoʻokuʻu ʻia ʻana i ka nohona.
FAQs
- Nīnau: Hiki i nā limahana kūpono ʻole ke hoʻohana i ka hāmeʻa?
A: ʻAʻole, pono e hoʻohana wale ʻia ka mea hana e nā limahana kūpono e like me ka mea i ʻōlelo ʻia ma nā memo palekana. - Nīnau: ʻEhia mau manawa e hana ʻia ka calibration?
A: Pono e hana mau ʻia ka calibration e like me ka mea i hōʻike ʻia ma ka ʻāpana calibration o ka manual e mālama pono i ka pololei. - Nīnau: He aha nā kūlana mālama no ka mea hana?
A: Ua kuhikuhi ʻia nā kūlana mālama i ka manual ma lalo o ka hana a me nā kūlana mālama.
Hiki ke loaʻa nā manual mea hoʻohana ma nā ʻōlelo like ʻole (français, italiano, español, português, nederlands, türk, polski, русский, 中文) ma ka hoʻohana ʻana i kā mākou huli huahana ma: www.pce-instruments.com.
Nā leka palekana
E ʻoluʻolu e heluhelu pono i kēia manual ma mua o kou hoʻohana ʻana i ka hāmeʻa no ka manawa mua. Hiki ke hoʻohana wale ʻia ka mea hana e nā limahana kūpono a hoʻoponopono ʻia e nā limahana PCE Instruments. Hoʻokaʻawale ʻia nā pōʻino a i ʻole nā ʻeha ma muli o ka mālama ʻole ʻana i ka manual mai kā mākou kuleana a ʻaʻole i uhi ʻia e kā mākou palapala hōʻoia.
- Pono e hoʻohana wale ʻia ka mea hana e like me ka mea i wehewehe ʻia ma kēia manual aʻo. Inā hoʻohana ʻē aʻe, hiki i kēia ke hoʻopilikia i ka mea hoʻohana a pōʻino i ka mika.
- Hiki ke hoʻohana wale ʻia ka mea hana inā ʻo nā kūlana kaiapuni (ka wela, ka haʻahaʻa pili, ...) i loko o nā pae i ʻōlelo ʻia ma nā kikoʻī loea. Mai hōʻike i ka hāmeʻa i nā wela kiʻekiʻe, ka lā pololei, ka haʻahaʻa loa a i ʻole ka makū.
- Mai hōʻike i ka hāmeʻa i nā haʻalulu a i ʻole nā haʻalulu ikaika.
- Pono e wehe ʻia ka hihia e nā limahana PCE Instruments kūpono.
- Mai hoʻohana i ka mea kani ke pulu kou mau lima.
- ʻAʻole pono ʻoe e hana i nā hoʻololi ʻenehana i ka hāmeʻa.
- Pono e hoʻomaʻemaʻe wale ʻia ka mea hana me ka hoʻolahaamp lole. E hoʻohana wale i ka mea hoʻomaʻemaʻe pH-neutral, ʻaʻohe abrasive a i ʻole nā mea hoʻoheheʻe.
- Pono e hoʻohana wale ʻia ka hāmeʻa me nā mea pono mai PCE Instruments a i ʻole like.
- Ma mua o kēlā me kēia hoʻohana, e nānā i ka pahu no ka ʻike ʻia. Inā ʻike ʻia kahi pōʻino, mai hoʻohana i ka hāmeʻa.
- Mai hoʻohana i ka mea kani i nā lewa pahū.
- ʻAʻole pono e hoʻokiʻekiʻe ʻia ka laulā ana e like me ka ʻōlelo ʻana i nā kikoʻī ma lalo o nā kūlana.
- ʻO ka mālama ʻole ʻana i nā memo palekana hiki ke hōʻeha i ka mea hoʻohana a hōʻeha i ka mea hoʻohana.
ʻAʻole mākou kuleana no ka paʻi ʻana i nā hewa a i ʻole nā hewa ʻē aʻe ma kēia manual.
Hōʻike maopopo mākou i kā mākou mau ʻōlelo hōʻoia maʻamau i hiki ke loaʻa i kā mākou ʻōlelo maʻamau o ka ʻoihana.
Nā kikoʻī
| Ka Mahana PCE-EMD 5 | |
| Laulā ana | 0 … 50 °C |
| Olelo Hooholo | 0,1 °C |
| Ka pololei | ±0,5 °C |
| Ka Mahana PCE-EMD 10 | |
| Laulā ana | 32 … 122 °F |
| Olelo Hooholo | 0,1 °F |
| Ka pololei | ±0,9 °F |
| Ka haʻahaʻa | |
| Laulā ana | 0…. 99.9 % RH |
| Olelo Hooholo | 0.1% RH |
| Ka pololei | ±3 % RH |
| Nā kikoʻī hou aku | |
| Manawa pane | <15 kekona |
| Ka helu o nā mea ʻike hoʻohana | 4 |
| Kiʻekiʻe huahelu | 100 mm / 3.9″ |
| kala huahelu | keʻokeʻo |
| Hāʻawi ka sensor voltage | 12 a me 24 V DC |
| ʻO ka hāʻawi ʻana i nā mea ʻike kiʻekiʻe loa | 100 mA |
| Hoʻokomo i kēia manawa impedance | <200 Ω |
| Hōʻike i nā mea hale | Hale alumini lacquered eleele |
| Hōʻike pale | Methacrylate anti-reflective |
| Mea hoʻopili hale sensor | ABS |
| Papa pale hōʻike | IP20 |
| Papa pale sensor | IP30 |
| Lako ikehu | 110 … 220 V AC 50 / 60 Hz |
| ʻO ka hoʻohana mana kiʻekiʻe | 18 W |
| Hōʻike kau ʻana | Paʻa ma luna o kahi ʻili ma o kahi kū kiaʻi (75 x 75 mm / 2.95 x 2.95″) |
| Hoʻopili ʻia ka sensor | palahalaha ma kahi ili |
| ʻO ka ʻaoʻao kea o ke kaula hoʻoheheʻe mana | 0.5…. 2.5 mm² (AWG 14) uwea paakiki
0.5…. 1.5 mm² (AWG 15) uwea hikiwawe |
| ʻO ka ʻāpana uwea o ka hoʻohui ʻana i ka ʻike maka | 0.14 0.15 mm² (AWG 18) uwea paakiki
0.15 1 mm² (AWG16) uwea hikiwawe |
| ʻO ke kuʻekuʻe wāwae | 1.2 Nm |
| ʻO ka lōʻihi o ke kāʻei hoʻopale | <12 mm / 0.47″ |
| Hōʻike ana | 535 x 327 x 53 mm / 21.0 x 12.8 x 2.0 ″ |
| Nā ana o nā mea ʻike | 80 x 80 x 35 mm / 3.1 x 3.1 x 1.3 ″ |
| Kūlana hana | -10 … 60 ºC, 5 … 95 % RH, ʻaʻole-condensing |
| Nā kūlana mālama | -20 … 70 ºC, 5 … 95 % RH, ʻaʻole-condensing |
| Hōʻike kaumaha | 4579 g / 161.5 oz |
| Kaumaha sensor | 66 g / 2.3 oz |
Lahi hoʻouna
- 1x hōʻike nui PCE-EMD moʻo (ma muli o ke kumu hoʻohālike)
- 2x mau pale no ka kau ʻana i ka paia
- 1x mea hoʻohana manual
Anana
Hōʻike ana
Nā ana o nā mea ʻike
Kiʻi uwea
4 … 20 mA mea ʻike ma ka hōʻike
Hoʻohui sensor
Diagram to PCE-EMD series (hōʻike)
| Koho | ʻO ke ʻano |
| 24 V | Lako Voltagʻo 24 V |
| 12 V | Lako Voltagʻo 12 V |
| Hx | Hoʻohui no ka haʻahaʻa |
| Tx | Hoʻohui no ka mahana |
| GND | Anana |
ʻO ka mea ʻike kiʻi kiʻi uila (insulated)
ʻO ka mea ʻike kiʻi uea (maʻamau)
Nā kuhikuhi
No ka hoʻohana ʻana i ka hōʻike, pono e hoʻopili ʻia ma waena o hoʻokahi a me ʻehā. No ka mea ʻaʻohe kī ma ka hōʻike, ʻaʻohe hana e koi ʻia. Hoʻohana 'akomi ka hōʻike.
Ke hana nei ka hōʻike penei:
| Ka helu o nā mea ʻike | Hōʻike |
| 0 | 99.9 °C / °F a me 99.9 % RH |
| 1 | Ana waiwai |
| 2 a oi | ʻAwelika o nā mea ʻike āpau |
Hoʻolālikelike
No ka hana ʻana i ka calibration, aia kahi lālani o nā hoʻololi i loko o ka sensor. Hiki ke hoʻohana i kēia mau hoʻololi e hoʻololi i ka hōʻailona wela. Hiki ke hoʻohui a unuhi ʻia ka waiwai i ana ʻia ma ka hoʻohuli ʻana i kēia mau hoʻololi. ʻAʻole pono e hoʻololi i kēia mau hoʻololi no ka mea ua hoʻonohonoho pono ʻia ka sensor ma ka hale hana.
| Kūlana 1 | Kūlana 2 | Kūlana 3 | Kūlana 4 | Hoʻoponopono |
| – | – | – | – | 0 |
| On | – | – | – | 0.2 |
| – | On | – | – | 0.4 |
| On | On | – | – | 0.6 |
| – | – | On | – | 0.8 |
| On | – | On | – | 1.0 |
| – | On | On | – | 1.2 |
| On | On | On | – | 1.4 |
Hoʻopili
Inā he mau nīnau kāu, manaʻo a i ʻole pilikia ʻenehana, e ʻoluʻolu e hoʻokaʻaʻike mai iā mākou. E ʻike ʻoe i ka ʻike pili pili ma ka hope o kēia manual mea hoʻohana.
Holoi
No ka hoʻokuʻu ʻia ʻana o nā pihi ma ka EU, pili ke kuhikuhi 2006/66/EC o ka Pāremata ʻEulopa. Ma muli o nā mea hoʻohaumia i loko, ʻaʻole pono e hoʻolei ʻia nā ʻeke ma ke ʻano he ʻōpala hale. Pono e hāʻawi ʻia i nā wahi hōʻiliʻili i hoʻolālā ʻia no ia kumu.
I mea e hoʻokō ai i ke kuhikuhi EU 2012/19/EU, hoʻihoʻi mākou i kā mākou mau polokalamu. Hoʻohana hou mākou iā lākou a hāʻawi iā lākou i kahi hui hana hou e hoʻopau ana i nā mea hana e like me ke kānāwai.
No nā ʻāina ma waho o ka EU, pono e hoʻolei ʻia nā pihi a me nā mea hana e like me nā lula o ka ʻōpala kūloko.
Inā he nīnau kāu, e ʻoluʻolu e kelepona i nā mea hana PCE.
ʻIke pili i ka PCE Instruments
Kelemānia
PCE Deutschland GmbH
ʻO wau ʻo Langel 26
D-59872 Meschede
ʻāina ʻo Deutschland
Tel.: +49 (0) 2903 976 99 0
Kelepaʻi: +49 (0) 2903 976 99 29
info@pce-instruments.com
www.pce-instruments.com/deutsch
Aupuni Mōʻī Hui Pū ʻia
PCE Instruments UK Ltd
Hale Trafford
Chester Rd, Old Trafford Manchester M32 0RS
Aupuni Mōʻī Hui Pū ʻia
Tel: +44 (0) 161 464902 0
Fax: +44 (0) 161 464902 9
info@pce-instruments.co.uk
www.pce-instruments.com/english
ʻO Netherlands
PCE Brookhuis BV Institutenweg 15
7521 PH Enschede
Nederland
Phone: + 31 (0) 53 737 01 92
info@pcebenelux.nl
www.pce-instruments.com/dutch
Palani
ʻO nā mea kani PCE ʻo France EURL
23, rue de Strasbourg
67250 Soultz-Sous-Forets
Palani
Kelepona: +33 (0) 972 3537 17 Numéro de fax: +33 (0) 972 3537 18
info@pce-france.fr
www.pce-instruments.com/french
Ikalia
PCE Italia srl
Via Pesciatina 878 / B-Interno 6 55010 Loc. Gragnano
Capannori (Lucca)
Italia
Kelepona: +39 0583 975 114
Fax: +39 0583 974 824
info@pce-italia.it
www.pce-instruments.com/italiano
ʻAmelika Hui Pū ʻIa
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8 Jupiter / Palm Beach
33458 fl
USA
Tel: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us
Kepania
PCE Ibérica SL
Calle Mula, 8
02500 Tobarra (Albacete) España
Tel. : + 34 967 543 548
Fax: +34 967 543 542
info@pce-iberica.es
www.pce-instruments.com/espanol
Kuleke
PCE ʻenehana Cihazları Ltd.Şti. Halkalı Merkez Mah.
Pehlivan Sok. No.6/C
34303 Küçükçekmece – ʻIstanbul Türkiye
Kelepona: 0212 471 11 47
Ka helu helu: 0212 705 53 93
info@pce-cihazlari.com.tr
www.pce-instruments.com/turkish
Kenemaka
Nā Mea Hana PCE Denmark ApS Birk Centerpark 40
7400 Herning
Kenemaka
Tel.: +45 70 30 53 08
kontakt@pce-instruments.com
www.pce-instruments.com/dansk
Palapala / Punawai
 |
Nā mea hana PCE PCE-EMD 5 Hōʻike Nui [pdf] Palapala Hoʻohana PCE-EMD 5, PCE-EMD 10, PCE-EMD 5 Hōʻike Nui, PCE-EMD, 5 Hōʻike Nui, Hōʻike Nui, Hōʻike. |
