Lisebelisoa tsa PCE PCE-EMD 5 Pontšo e Khōlō
Litaelo tsa Tšebeliso ea Sehlahisoa
Lintlha tsa Polokeho
Ka kopo bala bukana ea mosebelisi ka hloko pele u sebelisa sesebelisoa lekhetlo la pele. Sesebelisoa se lokela ho sebetsoa feela ke basebetsi ba tšoanelehang mme tokiso leha e le efe e lokela ho etsoa ke basebetsi ba PCE Instruments. Ho hloleha ho latela bukana ho ka baka tšenyo kapa likotsi tse sa koaheloang ke waranti.
Ho kenya
Latela litšoantšo tsa lithapo tse fanoeng bukeng ea ho kenya sensor. Netefatsa likhokahano tse nepahetseng tsa cable le litlhophiso tsa torque mochining oa terminal. Kenya sensor ka mokhoa o sireletsehileng ho latela litekanyo tse boletsoeng.
Tekanyetso
Sheba karolo ea 8 ea bukana bakeng sa litaelo tsa ho lekanya. Ho lekanya khafetsa ho bohlokoa ho boloka 'malo o nepahetseng.
Mokhoa oa puisano
Haeba u na le lipotso kapa u hloka thuso, ikopanye le PCE Instruments ho lintlha tse fanoeng karolong ea 9 ea bukana.
Ho lahla
Ha u lahla sehlahisoa, latela litataiso tse karolong ea 10 ea bukana ho etsa bonnete ba ho lahloa ho se nang tikoloho.
FAQs
- P: Na basebetsi ba sa tšoanelehang ba ka sebelisa sesebelisoa?
A: Che, sesebelisoa se lokela ho sebelisoa feela ke basebetsi ba tšoanelehang joalo ka ha ho boletsoe ho lintlha tsa polokeho. - P: Calibration e lokela ho etsoa hangata hakae?
A: Ho lokisoa ho lokela ho etsoa khafetsa joalo ka ha ho bonts'itsoe karolong ea tlhahlobo ea bukana ho boloka ho nepahala. - P: Maemo a polokelo ea sesebelisoa ke afe?
A: Maemo a polokelo a hlalositsoe bukeng ea litaelo tlas'a maemo a ho sebetsa le a polokelo.
Litaelo tsa basebelisi ka lipuo tse fapaneng (se-français, italiano, español, português, nederlands, türk, polski, русский, 中文) li ka fumanoa ka ho batla sehlahisoa sa rona ho: www.pce-instruments.com.
Lintlha tsa polokeho
Ka kopo bala bukana ena ka hloko le ka botlalo pele u sebelisa sesebelisoa ka lekhetlo la pele. Sesebelisoa se ka sebelisoa feela ke basebetsi ba tšoanelehang le ho lokisoa ke basebetsi ba PCE Instruments. Tšenyo kapa likotsi tse bakoang ke ho se latele bukana ha li kenyellelitsoe boikarabellong ba rona mme ha li koaheloe ke waranti ea rona.
- Sesebelisoa se tlameha ho sebelisoa feela joalokaha ho hlalositsoe bukeng ena ea litaelo. Haeba e sebelisoa ka tsela e 'ngoe, sena se ka baka maemo a kotsi ho mosebelisi le tšenyo ea metara.
- Sesebelisoa se ka sebelisoa feela ha maemo a tikoloho (thempereichara, mongobo o lekanyelitsoeng, ...) a le ka har'a mekhahlelo e boletsoeng ho litlhaloso tsa tekheniki. Se ke oa beha sesebelisoa mochesong o feteletseng, mahlaseling a letsatsi, mongobo o feteletseng kapa mongobo.
- Se ke oa pepesetsa sesebelisoa ho makala kapa ho thothomela ho matla.
- Nyeoe e lokela ho buloa feela ke basebetsi ba tšoanelehang ba PCE Instruments.
- Le ka mohla u se ke ua sebelisa sesebelisoa ha matsoho a hau a le metsi.
- Ha oa tlameha ho etsa liphetoho tsa tekheniki ho sesebelisoa.
- Sesebelisoa se lokela ho hloekisoa feela ka papatsoamp lesela. Sebelisa feela pH-neutral cleaner, ha ho na li-abrasives kapa solvents.
- Sesebelisoa se tlameha ho sebelisoa feela le lisebelisoa tse tsoang ho PCE Instruments kapa tse lekanang le tsona.
- Pele o sebelisoa, hlahloba mokotla bakeng sa tšenyo e bonahalang. Haeba ho na le tšenyo e bonahalang, u se ke ua sebelisa sesebelisoa.
- Se ke oa sebelisa sesebelisoa maemong a leholimo a phatlohang.
- Methati ea litekanyo joalo ka ha ho boletsoe ho lintlha ha ea tlameha ho fetisoa tlas'a maemo afe kapa afe.
- Ho se boloke lintlha tsa polokeho ho ka baka tšenyo ho sesebelisoa le likotsi ho mosebelisi.
Ha re nke boikarabello bakeng sa liphoso tsa khatiso kapa liphoso tse ling bukeng ena.
Re supa ka ho hlaka lipehelo tsa rona tsa tiisetso tse akaretsang tse ka fumanoang ho latela maemo a rona a kakaretso a khoebo.
Litlhaloso
| Mocheso PCE-EMD 5 | |
| Lekhalo la litekanyo | 0 … 50 °C |
| Qeto | 0,1 °C |
| Ho nepahala | ±0,5 °C |
| Mocheso PCE-EMD 10 | |
| Lekhalo la litekanyo | 32 … 122 °F |
| Qeto | 0,1 °F |
| Ho nepahala | ±0,9 °F |
| Mongobo | |
| Lekhalo la litekanyo | 0…. 99.9% ea RH |
| Qeto | 0.1% RH |
| Ho nepahala | ± 3% RH |
| Litlhaloso tse ling | |
| Nako ea ho arabela | <15 metsotsoana |
| Palo ea li-sensor tse ka sebelisoang | 4 |
| Bophahamo ba dijiti | 100 limilimithara / 3.9" |
| Mmala oa dijiti | tšoeu |
| Phepelo ea kutlo voltage | 12 le 24 V DC |
| Boholo ba phepelo ea sensor hajoale | 100 mA |
| Kenyelletso ea hajoale | <200 Ω |
| Bontša thepa ea bolulo | Ntlo ea aluminium e entsoeng ka lacquered e ntšo |
| Tšireletso ea pontšo | Methacrylate e thibelang ho bonahatsa |
| Lisebelisoa tsa bolulo tsa sensor | ABS |
| Sehlopha sa tšireletso ea pontšo | IP20 |
| Sehlopha sa tšireletso ea kutlo | IP30 |
| Phepelo ea motlakase | 110 … 220 V AC 50 / 60 Hz |
| Boholo ba tšebeliso ea matla | 18 W |
| Pontšo ea ho kenya | E bataletse ka holim'a sethala ka sethala (75 x 75 mm / 2.95 x 2.95 ″) |
| Ho phahamisa kutlo | sephara hodima bokahodimo |
| Karolelano ea likarolo tse fapaneng tsa phepelo ea motlakase ea terminal strip | 0.5…. 2.5 mm² (AWG 14) thapo e thata
0.5…. 1.5 mm² (AWG 15) thapo e fetofetohang |
| Cable cross-section ea terminal strip sensor connection | 0.14 0.15 mm² (AWG 18) thapo e thata
0.15 1 mm² (AWG16) thapo e fetofetohang |
| Terminal strip torque | 1.2 Nm |
| Bolelele ba sekoti sa terminal | <12 mm / 0.47″ |
| Bontša litekanyo | 535 x 327 x 53 mm / 21.0 x 12.8 x 2.0 ″ |
| Litekanyo tsa kutlo | 80 x 80 x 35 mm / 3.1 x 3.1 x 1.3 ″ |
| Maemo a ts'ebetso | -10 … 60 ºC, 5 … 95 % RH, e sa kolekeng |
| Maemo a polokelo | -20 … 70 ºC, 5 … 95 % RH, e sa kolekeng |
| Boima ba pontsho | 4579 g / 161.5 oz |
| Boima ba kutlo | 66 g / 2.3 oz |
Sebaka sa thomello
- 1x pontšo e kholo ea letoto la PCE-EMD (ho latela mohlala)
- Li-brackets tse 2x tsa ho kenya leboteng
- 1x buka ea mosebelisi
Litekanyo
Bontša litekanyo
Litekanyo tsa kutlo
Setšoantšo sa wiring
4 … lisensara tse 20 mA skrineng
Khokahano ea kutlo
Setšoantšo sa letoto la PCE-EMD (pontšo)
| Khethollo | Tlhaloso |
| 24 V | Phepelo voltage 24v |
| 12 V | Phepelo voltage 12v |
| Hx | Khokahano bakeng sa mongobo |
| Tx | Khokahano bakeng sa mocheso |
| GND | Litekanyo |
Sensor ea setšoantšo sa wiring (insulated)
Sensor ea setšoantšo sa wiring (e tloaelehileng)
Litaelo
Ho sebelisa ponts'o, lipakeng tsa sensor e le 'ngoe le tse' nè li tlameha ho hokeloa ho eona. Kaha ha ho na linotlolo skrineng, ha ho na ts'ebetso e hlokahalang. Pontšo e sebetsa ka ho feletseng.
Pontšo e sebetsa ka tsela e latelang:
| Palo ea li-sensor | Pontšo |
| 0 | 99.9 °C / °F le 99.9 % RH |
| 1 | Litekanyetso tse lekantsoeng |
| 2 kapa ho feta | Karolelano ea li-sensor tsohle |
Tekanyetso
Ho etsa calibration, ho na le mola oa li-switches ka hare ho sensor. Li-switches tsena li ka sebelisoa ho fetola lets'oao la mocheso. Boleng bo lekantsoeng bo ka eketsoa le ho tlosoa ka ho bulela le ho tima li-switches tsena. Ha ho khothalletsoe ho fetola li-switches tsena kaha sensor e se e behiloe ka nepo fekthering.
| Boemo 1 | Boemo 2 | Boemo 3 | Boemo 4 | Khalemelo |
| – | – | – | – | 0 |
| On | – | – | – | 0.2 |
| – | On | – | – | 0.4 |
| On | On | – | – | 0.6 |
| – | – | On | – | 0.8 |
| On | – | On | – | 1.0 |
| – | On | On | – | 1.2 |
| On | On | On | – | 1.4 |
Ikopanye
Haeba u na le lipotso, litlhahiso kapa mathata a tekheniki, ka kopo u se ke oa qeaqea ho ikopanya le rona. U tla fumana lintlha tse amanang le mabitso qetellong ea bukana ena ea mosebelisi.
Ho lahla
Bakeng sa ho lahloa ha libeteri ho EU, ho sebetsa taelo ea 2006/66/EC ea Paramente ea Europe. Ka lebaka la lintho tse silafatsang tse teng, libeteri ha lia tlameha ho lahloa e le litšila tsa ka tlung. Li tlameha ho fuoa libaka tsa pokello tse etselitsoeng morero oo.
E le ho latela taelo ea EU 2012/19/EU re khutlisetsa lisebelisoa tsa rona morao. Re ka li sebelisa hape kapa ra li fa k'hamphani e etsang lintho hape e tsamaisang lisebelisoa ho latela molao.
Bakeng sa linaha tse kantle ho EU, libeteri le lisebelisoa li tlameha ho lahloa ho latela melao ea sebaka sa heno ea litšila.
Haeba u na le lipotso, ka kopo ikopanye le PCE Instruments.
Lintlha tsa puisano tsa PCE Instruments
Jeremane
PCE Deutschland GmbH
Ke Langel 26
D-59872 Mechede
Deutschland
Mohala: +49 (0) 2903 976 99 0
Fekse: +49 (0) 2903 976 99 29
info@pce-instruments.com
www.pce-instruments.com/deutsch
united kingdom
PCE Instruments UK Ltd
Ntlo ea Trafford
Chester Rd, Old Trafford Manchester M32 0RS
united kingdom
Mohala: +44 (0) 161 464902 0
Fax: +44 (0) 161 464902 9
info@pce-instruments.co.uk
www.pce-instruments.com/english
Netherlands
PCE Brookhuis BV Institutenweg 15
Tlhaloso: 7521 PH
Nederland
Phone: + 31 (0) 53 737 01 92
info@pcebenelux.nl
www.pce-instruments.com/dutch
Fora
PCE Instruments France EURL
23, Rue de Strasbourg
67250 Soultz-Sous-Forets
Fora
Mohala: +33 (0) 972 3537 17 Numéro ea fax: +33 (0) 972 3537 18
info@pce-france.fr
www.pce-instruments.com/french
Italy
PCE Italia srl
Via Pesciatina 878 / B-Interno 6 55010 Loc. Gragnano
Kapannori (Lucca)
Italy
Thelefono: +39 0583 975 114
Fax: +39 0583 974 824
info@pce-italia.it
www.pce-instruments.com/italiano
Amerika
Litlhaloso tsa likarolo tsa PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8 Jupiter / Palm Beach
33458 leq
usa
Mohala: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us
Spain
PCE Ibérica SL
Calle Mula, 8
02500 Tobarra (Albacete) España
Mohala : +34 967 543 548
Fax: +34 967 543 542
info@pce-iberica.es
www.pce-instruments.com/espanol
kalakuni
PCE Teknik Cihazları Ltd.Şti. Halkalı Merkez Mah.
Pehlivan Sok. No.6/C
34303 Küçükçekmece – İstanbul Türkiye
Mohala: 0212 471 11 47
Fekese: 0212 705 53 93
info@pce-cihazlari.com.tr
www.pce-instruments.com/turkish
Denmark
PCE Instruments Denmark ApS Birk Centerpark 40
7400 Herning
Denmark
Mohala: +45 70 30 53 08
kontakt@pce-instruments.com
www.pce-instruments.com/dansk
Litokomane / Lisebelisoa
 |
Lisebelisoa tsa PCE PCE-EMD 5 Pontšo e Khōlō [pdf] Bukana ea Mosebelisi PCE-EMD 5, PCE-EMD 10, PCE-EMD 5 Large Display, PCE-EMD, 5 Large Display, Large Display, Display |
