HELIX P One MK2 1-Channel High-Res Ampmai kunnawa tare da shigar da siginar Dijital

Ya ku Abokin ciniki,
Taya murna kan siyan wannan sabon samfurin HELIX mai inganci.
Godiya ga fiye da shekaru 30 na gwaninta a cikin bincike da haɓaka samfuran sauti da HELIX P ONE MK2 ya tsara sabbin ka'idoji a cikin kewayon ampmasu rayarwa
Muna muku fatan jin daɗin sa'o'i masu yawa tare da sabon HELIX P ONE MK2.
Naku, AUDIOTEC FISCHER

Gabaɗaya umarni

Gabaɗaya umarnin shigarwa don abubuwan HELIX

• Don hana lalacewa ga naúrar da yiwuwar rauni, karanta wannan jagorar a hankali kuma bi duk umarnin shigarwa. An duba wannan samfurin don aikin da ya dace kafin jigilar kaya kuma yana da garanti daga lahani na masana'antu.
• Kafin fara shigarwar ku, cire haɗin mummunan tashar baturin don hana lalacewa ga naúrar, wuta, da/ko haɗarin rauni. Don ingantaccen aiki kuma don tabbatar da cikakken garanti, muna ba da shawarar shigar da wannan samfurin ta dila mai izini na HELIX.
• Shigar da HELIX P DAYA MK2 naka a cikin busasshen wuri tare da isassun iska don sanyaya kayan aiki daidai. The ampya kamata a kiyaye lififi zuwa madaidaicin saman hawa ta amfani da kayan hawan da ya dace. Kafin hawa, a hankali bincika wurin da ke kusa da bayan wurin da aka tsara na shigarwa don tabbatar da cewa babu igiyoyin lantarki ko abubuwan haɗin gwiwa, layin birki na ruwa ko kowane ɓangaren tankin mai da ke bayan saman hawa. Rashin yin hakan na iya haifar da lahani ga waɗannan abubuwan haɗin gwiwa da yuwuwar gyara abin hawa mai tsada.

Gabaɗaya umarni don haɗa HELIX P ONE MK2 amplififi

• HELIX P ONE MK2 ampZa a iya shigar da lifita kawai a cikin motocin da ke da madaidaicin madaidaicin Volts 12 da aka haɗa da ƙasan chassis. Duk wani tsarin zai iya haifar da lalacewa ga amplifier da tsarin lantarki na abin hawa.
• Ya kamata a samar da ingantaccen kebul daga baturi don cikakken tsarin tare da babban fuse a nesa na max. 30 cm daga baturi. Ana ƙididdige ƙimar fis ɗin daga matsakaicin jimlar shigar da ke yanzu na tsarin sauti na mota.
• Yi amfani da igiyoyi masu dacewa kawai tare da isassun ɓangaren giciye na USB don haɗin HELIX P ONE MK2. Ana iya maye gurbin fis ɗin kawai ta hanyar fuses masu ƙima iri ɗaya (4 x 30 A) don guje wa lalacewar ampmai sanyaya wuta.
• Kafin shigarwa, tsara hanyar da za a bi da wayar don guje wa duk wani lahani mai yuwuwa ga kayan aikin waya. Yakamata a kiyaye dukkan igiyoyi daga yuwuwar murkushewa ko haxari.
• Haka kuma a nisanci kebul na tuƙi kusa da yuwuwar hanyoyin amo kamar injinan lantarki, na'urorin haɗi masu ƙarfi da sauran kayan aikin abin hawa.

Masu haɗawa da sassan sarrafawa

• Matsayin LED
• Ƙarƙashin shigar da layin layi
• Clip LED
• Yanayin shigarwa
• SPDIF DIRECT IN canza
• Shigarwar dijital ta gani A/B
• Samun iko
• Fitowar magana
• Wuta & Mai haɗin nesa

Hardware sanyi

Saita HELIX P ONE MK2 kamar haka

Tsanaki: Yin aiwatar da matakai masu zuwa zai sake buƙatar kayan aiki na musamman da ilimin fasaha. Don guje wa kurakuran haɗi da / ko lalacewa, tambayi dillalin ku don taimako idan kuna da wasu tambayoyi kuma bi duk umarni a cikin wannan jagorar (duba shafi na 13). Ana ba da shawarar cewa dillalan HELIX mai izini ya shigar da wannan rukunin.

1. Haɗa abubuwan shigar da layin ƙananan matakan waɗannan abubuwan shigar da layin ƙananan matakan biyu ana iya haɗa su zuwa tushen sigina kamar raka'a kai / radi-os / DSPs / DSP amplifiers ta amfani da igiyoyi masu dacewa. Ana iya daidaita hankalin shigar da duk tashoshi zuwa tushen siginar ta amfani da sarrafa riba (duba shafi na 16, aya 6). Ba tilas ba ne a yi amfani da duk abubuwan da aka saka a cikin layi na ƙasa. Idan tasha ɗaya kaɗai za a haɗa, dole ne a saita canjin yanayin shigarwa zuwa tashar shigar da ta dace (duba shafi na 15, aya 3). Lura: Yana yiwuwa a yi amfani da shigarwar gani da shigarwar layin ƙasa a lokaci guda idan an kashe aikin SPDIF Direct In (duba shafi na 15, aya 4).
2. Haɗa tushen siginar dijital a tsarin SPDIF
   Idan kana da tushen sigina tare da fitarwar dijital na gani zaka iya haɗa ta zuwa ga amplifier ta amfani da shigar da ta dace. The sampMatsakaicin nauyi dole ne ya kasance tsakanin 28 da 96 kHz. Ana daidaita siginar shigarwa ta atomatik zuwa s na cikiampku rate.
   Ba dole ba ne a yi amfani da siginar shigarwa biyu. Idan sigina ɗaya kawai ya kamata a yi amfani da shi, dole ne a saita canjin yanayin shigarwa zuwa tashar shigar da ta dace (duba shafi na 15, aya 3).
   1. Muhimmi: Siginar tushen odiyo na dijital kullum baya ƙunsar kowane bayani game da matakin ƙara. Ka tuna cewa wannan zai haifar da cikakken matakin akan abubuwan da aka samu na HELIX P ONE MK2. Wannan na iya haifar da mummunar lahani ga lasifikar ku. Muna ba da shawara mai ƙarfi don amfani da tushen jiwuwa mai sarrafa ƙara kawai! Domin misaliampna'urorin DSP tare da fitowar siginar gani kamar P SIX DSP ULITMATE, BRAX DSP da dai sauransu.
   2. LuraHELIX P ONE MK2 na iya ɗaukar siginar sitiriyo na dijital da ba a haɗa ba a cikin tsarin PCM tare da kamarampƘimar tsakanin 28 kHz da 96 kHz kuma babu MP3- ko Dolby-coded audio rafi!
   3. Lura: Yana yiwuwa a yi amfani da shigarwar gani da shigarwar layin ƙasa kaɗan a lokaci guda idan aikin SPDIF Direct In ya ƙare (duba shafi na 15, aya 4).
3. Kanfigareshan na ampYanayin shigar da lifier Bayan haɗa abubuwan shigar da siginar da ake so, da ampDole ne a daidaita maƙasudi zuwa adadin abubuwan da aka yi amfani da su.
   1. Mono A: Zaɓi wannan saitin sauyawa idan kawai siginar tashar A ya kamata a yi amfani da shi azaman siginar shigarwa. Don misaliample, idan kawai siginar mono aka tanadar don aikace-aikacen subwoofer.
   2. Mono B: Zaɓi wannan saitin sauyawa idan kawai siginar tashar B ya kamata a yi amfani da shi azaman siginar shigarwa. Don misaliample, idan kawai siginar mono aka tanadar don aikace-aikacen subwoofer. Sitiriyo: Zaɓi wannan saitin sauyawa idan ana amfani da tashoshi na shigarwa (A da B). A cikin wannan yanayin an samar da ingantaccen siginar jimla ta siginar shigar da tashoshi A da B.
      Lura: Saitin maɓalli yana rinjayar duka abubuwan shigar da layin ƙasa da kuma shigarwar dijital na gani.
4. Kanfigareshan shigar da siginar dijital Don mafi kyawun aikin sauti, ana iya amfani da SPDIF Direct In switch (shafi na 14, aya 5) don ketare shigarwar s.tages na P DAYA MK2 da kuma tafiyar da siginar sauti daga shigarwar dijital (Tsarin Input A/B) kai tsaye kuma ba tare da wata karkata zuwa ga fitarwa s ba.tages na ampmai sanyaya wuta.
   1. On: Yana kunna sigina kai tsaye don mafi kyawun aikin sauti.
   2. Kashe: Zaɓi wannan matsayi na sauyawa idan kuna buƙatar ikon riba don daidaita yanayin shigar da bayanai (ta tsohuwa).
   3. Lura: Maɓalli yana rinjayar siginar da ke kan hanyar shigar da gani kawai. Idan an saita canjin zuwa "A kunne", ƙananan matakan shigar da layin da kuma sarrafa riba ba tare da aiki ba!
5. Haɗi zuwa wutar lantarki & nesa Tabbatar cire haɗin baturin kafin shigar da HELIX P ONE MK2!
   Tabbatar da madaidaicin polarity. + 12V: Mai haɗa don ingantaccen kebul. Haɗa kebul ɗin wutar lantarki +12 V zuwa ingantaccen tasha na baturi. Ingantacciyar waya daga baturi zuwa ampTashar wutar lantarki tana buƙatar samun fius na layi a nesa da bai wuce inci 12 (30) daga baturi ba. Ana ƙididdige ƙimar fis ɗin daga matsakaicin jimlar shigarwar halin yanzu na duk tsarin sauti na mota (P ONE MK2 = max. 120 A RMS a 12 V RMS wutar lantarki). Idan wayoyi na wutar lantarki sun kasance gajere (kasa da 1 m / 40) to ma'aunin waya na 16 mm² / AWG 6 zai isa. A duk sauran lokuta, muna ba da shawarar ƙarfi na 25 – 35 mm² / AWG 4 “2! GND: Mai haɗin kebul na ƙasa.
   Ya kamata a haɗa waya ta ƙasa zuwa wuri na gama gari (wannan yana wurin da mummunan tashar baturin ke ƙasa zuwa jikin ƙarfe na abin hawa), ko zuwa wurin da aka shirya da ƙarfe akan chassis ɗin abin hawa, watau wurin da yake da shi. an tsabtace duk sauran abubuwan fenti. Kebul ya kamata ya kasance yana da ma'auni ɗaya da waya ta +12 V. Rashin isassun ƙasa yana haifar da tsangwama da rashin aiki.
   REM: Ana amfani da shigarwar nesa don kunnawa da kashe P ONE MK2. Wajibi ne a haɗa wannan shigarwar zuwa abubuwan nesa na na'urar da aka riga aka haɗa wanda ke ba da siginar shigarwa zuwa P ONE MK2. Don misaliampLe fitar da nesa na P SIX DSP ULTIMATE da aka riga aka haɗa. Ba mu ba da shawarar sarrafa shigarwar ramut ta hanyar kunna kunnawa don guje wa hayaniyar da ke tashi yayin kunnawa / kashewa.
6. Daidaita hankalin shigarwar
   HANKALI: Ya zama dole don daidaita yanayin shigar da P ONE MK2 zuwa tushen siginar don cimma mafi kyawun ingancin siginar da kuma guje wa lalacewa ga amplififi. Za'a iya daidaita hankalin shigarwar da kyau zuwa tushen siginar ta amfani da sarrafa riba.

Wannan ba ikon sarrafa ƙara ba ne, don daidaitawa ne kawai ampriba riba. Saitin sarrafawa kuma yana rinjayar shigar da siginar dijital idan an saita SPDIF Direct In switch zuwa matsayin "Kashe".

Kewayon sarrafa riba shine:

• Shigar da Layi: 0.5 - 8.0 Volts
• Input na gani: 0 - 24 dB

Idan tushen siginar ba ya samar da isasshen fitarwa voltage, ana iya ƙara ƙarfin shigar da hankali ta hanyar sarrafa riba.
LED Clipping (duba shafi na 14, aya 3) yana aiki azaman kayan aikin sa ido.
Lura: Kar a haɗa kowane lasifika zuwa abubuwan da ke cikin HELIX P ONE MK2 yayin wannan saitin.

Don daidaitawa da fatan za a ci gaba kamar haka:

1. Kunna ampmai sanyaya wuta.
2. Daidaita ƙarar rediyon ku zuwa kusan. 90% na max. ƙara da sake kunnawa sautin gwajin da ya dace, misali hayaniyar ruwan hoda (0 dB).
3. Idan LED ɗin Clipping ya riga ya haskaka, dole ne ku rage shigar da hankali ta hanyar sarrafa riba har sai LED ɗin ya kashe.
4. Ƙara fahimtar shigar da bayanai ta hanyar jujjuya sarrafa riba zuwa agogon agogo har sai LED Clipping ya haskaka. Yanzu kunna ikon sarrafawa daidai da agogo har sai LED Clipping ya sake kashewa.

Haɗa abubuwan fitar da lasifikar

Ana iya haɗa abubuwan fitar da lasifikar kai tsaye zuwa wayoyi na lasifikar. Kada ku taɓa haɗa kowane igiyoyin lasifika tare da ƙasan chassis saboda wannan zai lalata ku amplifi da lasifikar ku. Tabbatar cewa an haɗa lasifika daidai (a cikin lokaci), watau ƙari zuwa ƙari da debe zuwa ragi. Musanya ƙari da ragi yana haifar da jimillar asarar haifuwar bass. Ana nuna sandar ƙari akan yawancin masu magana. Dole ne mai ƙarfi ya zama ƙasa da 1 Ohm, in ba haka ba ampZa a kunna kariyar lifi. ExampAna iya samun daidaitawar lasifikar a shafi na 19 et sqq.

Na zaɓi: Kunna / kashe matatar subsonic na ciki

P ONE MK2 sanye take da matatar subsonic mai iya canzawa 21 Hz. Ana iya kunna tacewa ko kashewa a cikin na'urar.

• Kunna: An kunna tace subsonic (ta tsohuwa).
• A kashe: An kashe tace subsonic. Ya kamata a kashe matatar subsonic kawai idan am-plifier yana aiki da siginar siginar dijital (DSP) ko DSP amplififi. Bugu da kari, tace subsonic (highpass) tare da mitar yankewa na min. 20 Hz da gangaren min. 36 dB/octave (Butterworth character-istic) dole ne a ba da shi a cikin hanyar siginar DSP / DSP da aka riga aka haɗa. ampmai sanyaya wuta.

Ƙarin ayyuka

Matsayin LED

Matsayin LED yana nuna yanayin aiki na ampmai sanyaya wuta.
Kore: Amplifier yana shirye don aiki. Rawaya/koren walƙiya: Kulawar zafi yana aiki. Kula da zafi mai zafi yana iyakance ƙarfin fitarwa kuma yana ba da damar cimma iyakar ƙarfin fitarwa koyaushe yana dogara da zafin jiki.
Rawaya: The ampmai zafi yana da zafi sosai. Kariyar zafin jiki na cikin gida tana kashe na'urar har sai ta sake kai madaidaicin matakin zazzabi.
Yellow walƙiya: Ana busa fis ɗin da ke cikin na'urar. Da fatan za a bincika fis ɗin kuma, idan ya cancanta, musanya su. Za a iya maye gurbinsu kawai ta hanyar fuses masu ƙima iri ɗaya (4 x 30 Am-pere) don guje wa lalata amplififi. Ja: Rashin aiki ya faru wanda zai iya samun tushen tushen daban-daban. HELIX P ONE MK2 an sanye shi da da'irori na kariya daga over- da undervoltage, gajeriyar kewayawa akan lasifika da kuma baya dangane. Da fatan za a bincika gazawar haɗawa kamar gajerun kewayawa ko wasu haɗin kai mara kyau. Idan da amplifi ba ya kunna bayan haka yana da lahani kuma dole a aika shi zuwa dila mai izini na gida don sabis na gyarawa.

Clip LED

Yawanci LED ɗin Clipping yana kashe kuma yana haskakawa kawai idan shigarwar stage ya wuce gona da iri.

• Kunna (ja): Ɗaya daga cikin abubuwan shigar da siginar ya wuce gona da iri. Rage hankalin shigar da bayanai ta amfani da sarrafa riba har sai LED ya fita. An kwatanta yadda za a rage jin daɗin shigar da bayanai a shafi na 16 aya ta 6.

Kanfigareshan misaliamples

LuraDole ne a saita mitocin crossover don babban- da lowpass a cikin DSP/DSP da aka riga aka haɗa. ampmai sanyaya wuta.

Mono subwoofer aikace-aikace
Subwoofer tare da muryoyin murya ɗaya (coil murya ɗaya)

Ƙarfin fitarwa na RMS ≤ 1% THD+N:

• 1 x 4 Ohms: 500 watts
• 1 x 2 Ohms: 880 watts
• 1 x 1 Ohm: 1,500 watts

Aiki a layi daya
Subwoofers biyu masu muryoyin murya guda ɗaya (ƙarar murya ɗaya) ko ɗaya subwoofer mai muryoyin murya biyu ana haɗa su a layi daya. Lura: Haɗin layi ɗaya na muryoyin muryoyin murya guda biyu zai haifar da raguwar abin ƙyama!

Ƙarfin fitarwa na RMS ≤ 1% THD+N:

• Subwoofers guda biyu tare da 1 x 4 Ohms sun dace da jimlar rashin ƙarfi na 2 Ohms: 880 Watts
• Subwoofer ɗaya tare da 2 x 4 Ohms shima yayi daidai da jimlar rashin ƙarfi na 2 Ohms: 880 Watts
• Subwoofers guda biyu tare da 1 x 2 Ohms sun dace da jimlar rashin ƙarfi na 1 Ohm: 1,500 Watts
• Subwoofer ɗaya tare da 2 x 2 Ohms shima yayi daidai da jimlar rashin ƙarfi na 1 Ohm: 1,500 Watts.
• Lura: Daidaitaccen haɗin haɗin muryoyin murya 1 Ohm zai sake haifar da rufewar ampmai sanyaya wuta.

Kanfigareshan misaliamples

A cikin jerin

Subwoofers guda biyu tare da muryoyin murya ɗaya (coil ɗin murya ɗaya) ko ɗaya subwoofer tare da muryoyin murya biyu ana haɗa su cikin jerin. Lura: Haɗin muryoyin muryoyin murya guda biyu a jeri zai haifar da ninki biyu na impedance!

Ƙarfin fitarwa na RMS ≤ 1% THD+N:

• Subwoofers guda biyu tare da 1 x 2 Ohms sun dace da jimlar rashin ƙarfi na 4 Ohms: 500 Watts
• Subwoofer ɗaya tare da 2 x 2 Ohms shima yayi daidai da jimlar rashin ƙarfi na 4 Ohms: 500 Watts
• Subwoofers guda biyu tare da 1 x 1 Ohm sun dace da jimlar rashin ƙarfi na 2 Ohms: 880 / 1,760 Watts
• Subwoofer ɗaya tare da 2 x 1 Ohm shima yayi daidai da jimlar rashin ƙarfi na 2 Ohms: 880 Watts
  Lura: Dole ne a haɗa madaidaicin tashar muryoyin muryoyin farko zuwa madaidaicin tasha na muryoyin murya ta biyu ta amfani da wayar lasifikar da ma'auni ɗaya da sauran lasifikar.

Aikace-aikacen sitiriyo tare da P DAYA MK2 guda biyu ampmasu amfani da siginar dijital

Bayanan daidaitawa na P ONE MK2 ampmasu kashe wuta:

Amplififi	Amplififi shigarwa	Yanayin shigarwa	SPDIF Kai tsaye A Canjawa	Na ciki subsonic tace
P DAYA MK2 (Hagu)	Input na gani A/B	Mono A	On	Kashe
P DAYA MK2 (Dama)	Input na gani A/B	Mono B	On	Kashe

MUHIMMANCIDole ne a saita mitocin crossover don babban- da lowpass a cikin DSP/DSP da aka riga aka haɗa. amplififi. Muna ba da shawarar tace subsonic (highpass) tare da yanke mitar min. 20 Hz da gangaren min. 36 dB a kowace octave (halayen Butterworth).

Bayanan Fasaha

• Ƙarfin RMS ≤ 1% THD+N
  • @ 4 Ohms ………………………………………………………………………………………………………………………….1 x 500 Watts
  • @ 2 Ohms ………………………………………………………………………………………………………………………….1 x 880 Watts
  • @ 1 Ohm…………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………1 x 1.500 Watts
• Max. Ƙarfin fitarwa akan kowane tasho
• AmpFasahar haske………………………………………………………………………………………………………………………………
• Abubuwan shigarwa………………………………………………………………………………….. 2 x RCA / Cinch 1 x SPDIF Na gani (28 – 96 kHz) 1 x Mai Nisa a ciki
• Hankalin shigarwa………………………………………………………………….. RCA / Cinch: 0.5 V - 8 V
• Input impedance …………………………………………………………………………………………… RCA / Cinch: 20 kOhms
• Outputs .............................................................. .. 1 x XNUMX x
• Mai sauya sigina don shigarwar dijital……………………………………………………………………………………………………… BurrBrown 32 Bit DA mai sauya
• Kewayon mitoci…………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………21 Hz - 40,000 Hz
• Subsonic tace……………………………………………………….21 Hz / Butterworth 48 dB/Okt.
• Rarraba siginar-zuwa amo (A-bewertet) …………………………………………. Shigarwar dijital: 110 dB Analog shigarwar: 110 dB
• Karya (THD) …………………………………………………………………………………………………………………………………………………………………………………………….
• DampFasali…………………………………………………………………………………………………………………………………………………………………
• Ƙa'idar aikitage……………………………………………………………………………….10.5 – 17 Volts (max. 5 sec. down to 6 Volts)
• Rage halin yanzu ………………………………………………………………………………………………………… 1500 mA
• Fuse ...........................................................................................................................................
• Ƙimar wutar lantarki……………………………………………………………………………………… DC 12 V 160 A max.
• Yanayin zafin aiki na yanayi………………………………………………………………-40 °C zuwa +70 °C
• Ƙarin fasalulluka ……………………………………………………………………………………………………………………………………………………………………………………………………………………
• Ƙarfin farawa-Tsaya
• Girma (H x W x D)…………………………………………………………………………………………50 x 260 x 190 mm / 1.97 x 10.24 x 7.48”

A cikin aikace-aikace na yau da kullun azaman subwoofer amplififi

Garanti Disclaimer

Sabis ɗin garanti ya dogara ne akan ƙa'idodin doka. Lalacewa da lalacewa ta hanyar wuce gona da iri ko rashin kulawa ba a cire su daga sabis na garanti. Duk wani dawowa zai iya faruwa ne kawai bayan tuntuɓar farko, a cikin marufi na asali tare da cikakken bayanin kuskuren da ingantaccen tabbacin siyan.
gyare-gyaren fasaha, kuskure da kurakurai ban da su!
Ba mu yarda da wani alhaki na lalacewar abin hawa ko na'urar da ke haifar da kuskuren aikin na'urar ba. An ba da wannan samfurin alamar CE. Wannan yana nufin cewa na'urar tana da takaddun shaida don amfani da motoci a cikin Tarayyar Turai (EU).

Audiotec Fischer GmbH Hünegräben 26 · 57392 Schmallenberg · Jamus
Tel.: +49 2972 ​​9788 0
Fax: +49 2972 9788 88
Imel: helix@audiotec-fischer.com ·
Intanet: www.audiotec-fischer.com

Takardu / Albarkatu

HELIX P One MK2 1-Channel High-Res Ampmai kunnawa tare da shigar da siginar Dijital [pdf] Manual mai amfani P One MK2 1-Channel High-Res Ampmai kunnawa tare da shigar da siginar dijital, P One MK2, 1-Channel High-Res Ampmai kunnawa tare da shigar da siginar Dijital, 1-Channel High-Res Ampmai haske, High-Res Amplififi, Amplififi

Magana

• Manual mai amfani