infobit iCam VB80 Platform API Imiyalelo

Ulwazi lweMveliso

Iinkcukacha:

• Igama lemveliso: iCam VB80
• Uguqulelo loxwebhu: V1.0.3
• Iqonga: API imiyalelo Manual
• Webindawo: www.infobitav.com
• I-imeyile: info@infobitav.com

Imiyalelo yokusetyenziswa kwemveliso

Intshayelelo

1. Ukulungiselela
   Ukuqala ukusebenzisa i-iCam VB80, landela la manyathelo:
   • Ukuseta idilesi ye-IP kwikhompyuter yakho
   • Ukunika amandla uMxumi weTelnet
2. Ngena nge-Command-line Interface
   Fikelela kujongano lomgca womyalelo ukusebenzisana nesixhobo.
3. Imiyalelo ye-API ngaphezuluview
   Qonda imiyalelo eyahlukeneyo ye-API ekhoyo yoqwalaselo nolawulo.

Iiseti zomyalelo

Imiyalelo ye-gbconfig
Qwalasela useto olunxulumene nekhamera kunye nevidiyo usebenzisa le miyalelo ilandelayo:

Ikhamera:

• gbconfig --camera-mode
• gbconfig -s camera-mode

Ividiyo:

• gbconfig --hdcp-enable

Imibuzo Ebuzwa Rhoqo (FAQ)

• Umbuzo: Ndiyihlaziya njani i-firmware ye-iCam VB80?
  A: Ukuhlaziya i-firmware, nceda undwendwele yethu webindawo yemiyalelo eneenkcukacha kunye nokukhutshelwa.
• Umbuzo: Ndingayisebenzisa i-iCam VB80 kunye nesoftware yomntu wesithathu?
  A: Ewe, i-iCam VB80 ixhasa ukudityaniswa nesoftware yomntu wesithathu usebenzisa imiyalelo enikiweyo ye-API.

Imbali yohlaziyo

Inguqulelo yoXwebhu	Umhla	Imixholo	Amagqabantshintshi
V1.0.0	2022/ 04/02	yokuqala
V1.0.1	2022/ 04/22	Ukuchwetheza okuhlaziyiweyo
V1.0.2	2023/ 06/05	Yongeza i-API entsha
V1.0.3	2024/ 03/22	Ilungisiwe

Intshayelelo

Ukulungiselela
Eli candelo lithatha isixhobo solawulo lomntu wesithathu Windows 7 njenge example. Unokusebenzisa nezinye izixhobo zolawulo.

Ukuseta idilesi ye-IP kwikhompyuter yakho
Amanyathelo okusebenza anenkcukacha akafakwanga apha.

Ukunika amandla uMxumi weTelnet
Phambi kokungena kwisixhobo usebenzisa ujongano lwelayini yomyalelo, qiniseka ukuba iTelnet Client yenziwe yasebenza. Ngokungagqibekanga, uMxumi weTelnet uvaliwe kwiWindows OS. Ukuvula iTelnet Client, yenza ngolu hlobo lulandelayo.

1. Khetha Qala> Iphaneli yokulawula> Iinkqubo.
2. Kwibhokisi yommandla weeNkqubo kunye neMicimbi, cofa Vula okanye uvale iifitsha zeWindows.
3. Kwibhokisi yencoko yababini yeempawu zeWindows, khetha i Tel the net Client check box.

Ngena nge-Command-line Interface

1. Khetha Qala > Qhuba.
2. Kwi-Run ibhokisi yencoko yababini, ngenisa cmd uze ucofe u-Kulungile.
3. Igalelo le telnet xxxx 23. “23” yinombolo yesiqhagamshelanisi.
   Umzekeloample, ukuba isixhobo idilesi ye IP 192.168.20.140, igalelo telnet 192.168.20.140 23 uze ucinezele Ngena.
4. Xa isixhobo sikhokelela ekungeneni, igalelo lomlawuli kwaye ucinezele u-Enter, emva koko isixhobo sikhupha igama eliyimfihlo, cofa nje u-Enter ngqo kuba umlawuli womsebenzisi akanalo igama eliyimfihlo.

“Isixhobo sikulungele ukwenza umyalelo we-CLI API. Imo iya kubonisa Wamkelekile kwiVB10/ VB80.”

Imiyalelo ye-API ngaphezuluview

Imiyalelo yesi sixhobo ye-API ihlelwa ikakhulu kwezi ntlobo zilandelayo.

• gbconfig: Lawula uqwalaselo lwesixhobo.
• gbcontrol: lawula isixhobo ukwenza into.

Imiyalelo ye-gbconfig
Imiyalelo ye-gbconfig ihlelwa ikakhulu kwiindidi ezimbini ze-gbconfig kunye ne-gbconfig -s imiyalelo.

Imiyalelo	Inkcazo
gbconfig -imowudi yekhamera	Cwangcisa imowudi yokulandelela yekhamera yesixhobo.
gbconfig -s imowudi yekhamera	Fumana imowudi yokulandelela yekhamera yesixhobo.
gbconfig –ikhamera-zoom	Seta ukusondeza kwekhamera.
gbconfig -s ikhamera-zoom	Fumana ukusondeza kwekhamera.
gbconfig –ikhamera-gcinacoord	Gcina ulungelelwaniso njengokusetha kwangaphambili oku-1 okanye ukuseta kwangaphambili u-2.
gbconfig -s –ikhamera-gcinacoord	Fumana ukusetha kwangaphambili okuhambelana nezilungelelanisi.
gbconfig –ikhamera-loadcoord	Layisha ukusetha kwangaphambili kwikhamera.
gbconfig –ikhamera-isipili	Vula/cima isipili sekhamera.
gbconfig -s ikhamera-isibuko	Fumana isimo sesipili sekhamera.
gbconfig –ikhamera-amandla rhoqo	Seta amaza ombane ombane.
gbconfig -s ikhamera-amandla rhoqo	Fumana i-powerline frequency.
gbconfig –ikhamera-geeptz	Fumana ulwazi lwe-eptz.
gbconfig -hdcp-yenza i-hdmi isebenze	Cwangcisa / cima HDCP kwi HDMI Out
gbconfig -s hdcp-yenza isebenze	Fumana isimo se-HDCP se-HDMI ngaphandle
gbconfig -cec-enable	Seta i-CEC ivuleleke/yicime.
gbconfig -s cec-enable	Fumana ubume beCEC.
gbconfig -cec-cmd HDmi	Qwalasela imiyalelo ye-CEC yokulawula umboniso on/off.
gbconfig -s cec-cmd	Fumana imiyalelo ye-CEC yokulawula umboniso on/off.
gbcontrol -thumela-cmd hdmi	Thumela imiyalelo ye-CEC yokulawula umboniso on/off.
gbconfig -mic-mute	Cwangcisa ukucinywa kwe-microphone.
gbconfig -s mic-mute	Fumana i-microphone isimumu kwi/cima isimo.
gbconfig -umthamo	Seta ivolyum yesandi.
gbconfig -s umthamo	Fumana ivolyum yesandi.
gbconfig -autovolume	Lungisa ivolumu yomsindo (ukunyusa / ukuncipha).

gbcontrol Imiyalelo

Umyalelo	Inkcazo
gbcontrol -thumela-cmd hdmi	Ukuthumela umyalelo we-CEC kwisiboniso ngokukhawuleza.

Iiseti zomyalelo

Imiyalelo ye-gbconfig

Ikhamera:

gbconfig -imowudi yekhamera

Umyalelo	gbconfig -imowudi yekhamera {eqhelekileyo | ukwakheka okuzenzekelayo | ukulandelela isithethi | presentertracking}
Impendulo	Ikhamera iya kutshintsha kwimowudi yokulandelela echaziweyo.
Inkcazo	Seta imowudi yokulandela yekhamera ukusuka koku kulandelayo: • eqhelekileyo: Abasebenzisi kufuneka balungise ikhamera kwi-engile efanelekileyo ngesandla. • i-autoframing: Ikhamera ilandelela ngokuzenzekelayo abantu ngokusekelwe ekuqapheleni ubuso. • ukulandelela isithethi: Ikhamera ilandelela ngokuzenzekelayo isithethi ngokusekelwe kulwazi lwentetho. • ipresentertracking: Ikhamera ilandelela ngokuzenzekelayo umenzi rhoqo.

Example:
Ukuseta imowudi yokulandela kwi-auto-framing:

Umyalelo:
i-gbconfig -imowudi yekhamera ngokuzenzekela

Impendulo:
Imowudi yokulandelela ikhamera iya kumiselwa kwi-autoframing.

gbconfig -s imowudi yekhamera

Umyalelo	gbconfig -s imowudi yekhamera
Impendulo	{eqhelekileyo | autoframing | speakertracking | presentertracking}
Inkcazo	Fumana imowudi yokulandelela yekhamera.

Example:
Ukufumana imowudi yokulandelela yekhamera:

• Umyalelo:
  gbconfig -s imowudi yekhamera
• Impendulo:
  eqhelekileyo

Oku kubonisa ukuba imowudi yokulandelela imiselwe "njengesiqhelo".

gbconfig –ikhamera-zoom

Umyalelo

gbconfig –ikhamera-zoom {[100, gbconfig -s camera-phymaxzoom]}

Impendulo	Usondezo lwekhamera luya kutshintshwa.
Inkcazo	Seta ukusondeza kwekhamera. Ixabiso elikhoyo lisuka kwi-100% (1x) ukuya kwikhamera kwandisa ubukhulu bomzimba. UmzekeloampLe, ukuba ikhamera yezoom ebonakalayo iphezulu ngama-500, uluhlu olukhoyo losondezo [100, 500]. (1x ukuya ku-5x)

Example:
Ukuseta i-zoom yekhamera njenge-100:

• Umyalelo:
  gbconfig –ikhamera-zoom 100
• Impendulo:
  Usondezo lwekhamera luzakusetwa ku-1x.

gbconfig -s ikhamera-zoom

Umyalelo	gbconfig -s ikhamera-zoom
Impendulo	xxx
Inkcazo	Fumana ukusondeza kwekhamera.

Example:
Ukufumana i-zoom yekhamera:

• Umyalelo:
  gbconfig -s ikhamera-zoom
• Impendulo:
  100

Usondezo lwekhamera yi-1x.

gbconfig –ikhamera-gcinacoord

Umyalelo	gbconfig –ikhamera-gcinacoord {1|2}
Impendulo	Ulungelelwaniso lwangoku luya kugcinwa ukuze lusetwe kwangaphambili 1 okanye 2.
Inkcazo	Gcina ulungelelwaniso lwangoku kucwangciso oluxeliweyo. I-Presets 1 kunye ne-2 iyanikezelwa.

Example:
Ukuseta ulungelelwaniso lwangoku ukusetwa kwangaphambili 1:

• Umyalelo:
  gbconfig –ikhamera-gcinacoord 1
• Impendulo:
  Ulungelelwaniso luyakugcinwa ukusetwa kwangaphambili 1.

gbconfig -s –ikhamera-gcinacoord

Umyalelo	gbconfig –s camera-savecoord {1 | 2}
Impendulo	yinyani/bubuxoki
Inkcazo	Ukufumana ukuba ulungelelwaniso lugcinwe kucwangciso oluxeliweyo. • Yinyani: Izinxulumanisi zigciniwe kucwangciso oluchaziweyo esele lubekiwe. • Ubuxoki: Ulungelelwaniso alugcinwanga kucwangciso oluxeliweyo.

Example:
Ukufumana ukuba ulungelelwaniso lwangoku lugcinwe ukusetwa kwangaphambili 1:

• Umyalelo:
  gbconfig –s camera-savecoord 1
• Impendulo:
  bubuxoki

Ulungelelwaniso alugcinwanga ukusetwa kwangaphambili 1.

gbconfig –ikhamera-loadcoord

Umyalelo	gbconfig –ikhamera-loadcoord {1 | 2}
Impendulo	Ukusetha kwangaphambili okuchaziweyo kuya kulayishwa kwikhamera.
Inkcazo	Layisha i-preset 1/2 kwikhamera.

Example:
Ukulayisha ukusetha kwangaphambili oku-1 kwikhamera:

• Umyalelo:
  gbconfig –ikhamera-loadcoord 1
• Impendulo:
  Ukuseta kwangaphambili i-1 iya kulayishwa kwikhamera.

gbconfig –ikhamera-isipili

Umyalelo	gbconfig –ikhamera-isipili {n | y}
Impendulo	Umsebenzi wokujonga isipili uya kuvulwa okanye ucinywe.
Inkcazo	Ukuvula okanye ukucima umsebenzi wesipili sekhamera. • n: Ukwenza isipili. • y: Isipili sivuliwe.

Example:
Ukuvula isipili:

• Umyalelo:
  gbconfig –ikhamera-isipili y
• Impendulo:
  Umsebenzi wokujonga isipili uya kuvulwa.

gbconfig -s ikhamera-isibuko

Umyalelo	gbconfig -s ikhamera-isibuko
Impendulo	n/y
Inkcazo	Ukufumana imo yesipili. • n: Ukwenza isipili. • y: Isipili sivuliwe.

Example:
Ukufumana imeko yesipili:

• Umyalelo:
  gbconfig -s ikhamera-isibuko
• Impendulo:
  y

Umsebenzi wesipili sekhamera uvuliwe.

gbconfig –ikhamera-amandla-freq

Umyalelo	gbconfig –ikhamera-amandla-freq {50 | 60}
Impendulo	I-frequency iza kutshintshwa ibe 50/60.
Inkcazo	Ukutshintsha i-frequency yentambo yombane ukunqanda ukuqhwanyaza kwividiyo. • 50: Guqula i-frequency ukuya kwi-50Hz. • 60: Guqula i-frequency ukuya kwi-60Hz.

Example:
Ukutshintsha i-frequency yentambo yombane ibe yi-60Hz:

• Umyalelo:
  gbconfig –ikhamera-amandlafreq 60
• Impendulo:
  I-frequency yentambo yombane iya kutshintshwa ibe yi-60Hz.

gbconfig –s ikhamera-amandlafreq

Umyalelo	gbconfig –s ikhamera-amandlafreq
Impendulo	n/50/60
Inkcazo	Fumana i-frequency ye-powerline. • 50: Guqula i-frequency ukuya kwi-50Hz. • 60: Guqula i-frequency ukuya kwi-60Hz.

Example:
Ukufumana i-frequency yentambo yombane:

• Umyalelo:
  gbconfig –s ikhamera-amandlafreq
• Impendulo:
  60

I-anti-flicker function yi-60Hz.

Ividiyo:

gbconfig -hdcp-enable

Umyalelo	gbconfig -hdcp-vula i-hdmi {n | auto | hdcp14 | hdcp22}
Impendulo	I-HDCP ye-HDMI Ngaphandle iya kwenziwa okanye ivaliwe.
Inkcazo	Qwalasela isakhono seHDCP seHDMI Ngaphandle. • n: Cima i-HDCP. • ngokuzenzekela: I-HDCP iya kuvulwa/icinywe ngokuzenzekelayo ngokusekelwe kwimeko eyiyo. umz. xa "i-auto" iseti, ukuba zombini umthombo kunye ne-HDMI ibonise inkxaso ye-HDCP 2.2, i-HDMI isibonakaliso semveliso iya kuba yi-HDCP 2.2 efihliweyo; ukuba umthombo awuxhasi i-HDCP, i-HDCP ye-HDMI yesignali yokuphuma iya kucima. • I-hdcp14: I-HDCP ye-HDMI Ngaphandle iya kusekwa njenge-1.4. • I-hdcp22: I-HDCP ye-HDMI Ngaphandle iya kusekwa njenge-2.2.

Example:
Ukuseta i-HDCP ye-HDMI njenge-2.2:

• Umyalelo:
  I-gbconfig -hdcp-yenza i-hdmi isebenze i-hdcp22
• Impendulo:
  I-HDCP ye-HDMI ikhutshwe njenge-2.2.

gbconfig -s hdcp-yenza isebenze

Umyalelo	gbconfig -s hdcp-yenza isebenze
Impendulo	n/auto/hdcp14/hdcp22
Inkcazo	Fumana imo ye-HDCP ye-HDMI Out.

Example:
Ukufumana imeko ye-HDCP ye-HDMI ngaphandle:

• Umyalelo:
  gbconfig -s hdcp-yenza isebenze
• Impendulo:
  n

I-HDCP ye-HDMI icinyiwe.

gbconfig -cec-enable

Umyalelo	gbconfig -cec-enable {n | y}
Impendulo	I-CEC iya kuvulwa okanye icinywe.
Inkcazo	Seta i-CEC ivuliwe/ivaliwe. n: Cima i-CEC. y: Vula i-CEC.

Example:
Ukuvula i-CEC:

• Umyalelo:
  gbconfig -cec-vula y
• Impendulo:
  I-CEC iza kuvulwa.

gbconfig -s cec-enable

Umyalelo	gbconfig -s cec-enable
Impendulo	n/y
Inkcazo	Fumana ubume beCEC. n: CEC icimile. y: I-CEC ivuliwe. Qaphela: Nje ukuba i-CEC ivaliwe, umyalelo othi "ulawulo lwe-GB -i-sink power" ayiyi kufumaneka, kwaye ukutshintsha phakathi kokusebenza okuqhelekileyo kunye nokulinda kwe-VB10 kuya kungasebenzi kwakhona.

Example:
Ukufumana ubume beCEC:

• Umyalelo:
  gbconfig -s cec-enable
• Impendulo:
  y

I-CEC ivuliwe.

gbcontrol -sinkpower

Umyalelo	gbcontrol –sinkpower {on | cima}
Impendulo	Umyalelo weCEC wokulawula umboniso on/off uya kuthunyelwa ukusuka HDMI Out ukuya umboniso oqhagamshelweyo.
Inkcazo	Ukuthumela umyalelo we-CEC wokulawula umboniso uvuliwe okanye uvaliwe. Vula: Thumela umyalelo we-CEC wokulawula umboniso. Valiwe: Thumela umyalelo we-CEC wokulawula umboniso ucimile.

Example:
Ukuthumela umyalelo we-CEC wokulawula umboniso kwi:

• Umyalelo:
  gbcontrol -sinkpower on
• Impendulo:
  Umyalelo we-CEC wamandla kwi-CEC-enabled display uya kuthunyelwa kwi-HDMI ngaphandle.

gbconfig -cec-cmd HDmi

Umyalelo	gbconfig –cec-cmd hdmi {kwi | cima} {CmdStr}
Impendulo	Imiyalelo ye-CEC yokulawula umboniso on/off iya kuqwalaselwa kwaye igcinwe kwi

	isixhobo.
Inkcazo	Ukuqwalasela nokugcina imiyalelo ye-CEC yokulawula umboniso kwisixhobo. Vula: Qwalasela umyalelo we-CEC wokulawula umboniso. Cima: Qwalasela umyalelo we-CEC wokulawula umboniso ucimile. CmdStr: Umyalelo we-CEC kumtya okanye ifomathi ye-hex. UmzekeloampLe, umyalelo weCEC kumandla ekuboniseni unokuba "40 04".

Example:
Ukuqwalasela nokugcina umyalelo we-CEC "40 04" wokunika amandla kumboniso kwisixhobo:

• Umyalelo:
  gbconfig -cec-cmd HDmi kwi4004
• Impendulo:
  Umyalelo we-CEC wokunika amandla kwi-CEC-enabled display "40 04" iya kugcinwa kwisixhobo.

gbconfig -s cec-cmd

Umyalelo	gbconfig -s cec-cmd
Impendulo	I-HDMI IVULIWE: xxxx I-HDMI CIMA: xxxx
Inkcazo	Fumana imiyalelo ye-CEC yokulawula umboniso wokuvula nokucima. Ÿ ivuliwe: Qwalasela umyalelo we-CEC wokulawula umboniso kwi. Ÿ Valiwe: Qwalasela umyalelo we-CEC wokulawula umboniso ucimile. Ÿ CmdStr: Umyalelo we-CEC kumtya okanye ifomathi ye-hex. Umzekeloample, iCEC Umyalelo kumandla kumboniso unokuba ngu "40 04".

Example:
Ukufumana imiyalelo ye-CEC yokulawula ukuboniswa nokuvala:

• Umyalelo:
  gbconfig -s -cec-cmd
• Impendulo:
  • I-HDMI KWI: 4004
  • I-HDMI CIMA: ff36

Umyalelo we-CEC wamandla kwi-CEC-enabled display: yi "40 04"; umyalelo wokucima isiboniso: ngu “ff 36”.

gbcontrol -thumela-cmd hdmi

Umyalelo	gbcontrol -thumela-cmd hdmi {CmdStr}
Impendulo	Umyalelo we-CEC {CmdStr} uya kuthunyelwa kwisiboniso ngokukhawuleza ukuze uvavanywe.
Inkcazo	Ukuthumela umyalelo we-CEC {CmdStr} kwidispleyi ngokukhawuleza. Qaphela: Lo myalelo awuyi kugcinwa kwisixhobo.

Example:
Ukuthumela imiyalelo ye-CEC "44 04" kumboniso:

• Umyalelo:
  gbcontrol -thumela-cmd hdmi 4004
• Impendulo:
  Umyalelo we-CEC "40 04" uya kuthunyelwa kwisiboniso ngokukhawuleza.

gbconfig -impuku-yenza isebenze

Umyalelo	i-gbconfig –impuku-yenza isebenze {n |y}
Impendulo	I-Miracast phezu kwe-Infrastructure feature inikwe amandla okanye ivaliwe
Inkcazo	n, bakhubazekile. y, yenziwe.

Example:
Ukuseta i-Miracast ngaphezulu kweZiseko zoPhuhliso njengoko yenziwe:

• Umyalelo:
  gbconfig –iimpuku-yenza y
• Impendulo:
  I-Miracast phezu kwe-Infrastructure feature iya kwenziwa.

gbconfig -s iimpuku-yenza isebenze

Umyalelo	gbconfig -s iimpuku-yenza isebenze
Impendulo	n/y
Inkcazo	n, bakhubazekile. y, yenziwe.

Example:
Ukufumana i-Miracast ngaphezulu kwemeko yeZiseko:

• Umyalelo:
  gbconfig -s iimpuku-yenza isebenze
• Impendulo:
  n

I-Miracast phezu kwe-Infrastructure ivaliwe.

gbconfig -imo yokubonisa

Umyalelo	gbconfig -display-mode {enye | zimbini}
Impendulo	Cwangcisa uyilo lweDisplay ibenye, yahlulwe
Inkcazo	I-Single kunye ne-Split luyilo oluzenzekelayo,

Example:
Ukuseta Ubeko lokuBonisa kwimo yesandla:

• Umyalelo:
  gbconfig -imowudi yokubonisa enye
• Impendulo:
  Imo yokubonisa uyilo lujike lwaba lulodwa.

gbconfig -s imo yokubonisa

Umyalelo	gbconfig -s imo yokubonisa
Impendulo	enye/ kabini/ngesandla
Inkcazo	enye, uyilo oluzenzekelayo olukabini, incwadana yobeko lolwahlulo oluzenzekelayo, yolungiselelo lobeko lwezandla

Example:
Ukufumana imo yendlela yokubonisa:

• Umyalelo:
  gbconfig -s imo yokubonisa
• Impendulo:
  omnye

Imowudi yokubonisa ayiyodwa.

Isandi:

gbconfig -mic-mute

Umyalelo	gbconfig -mic-mute {n | y}
Impendulo	Zonke iimayikhrofoni ziya kusekwa njengezimumu kwi/cinyiwe.
Inkcazo	Seta zonke ii-microphone (kubandakanywa ii-VB10 kunye nee-microphones ezinwebekayo) zicime/cime. n: cima. y: thula.

Example:
Ukuseta yonke i-microphone icime:

• Umyalelo:
  gbconfig -mic-mute n
• Impendulo:
  Iimayikhrofoni ziya kusekwa njengezimumu.

gbconfig -s mic-mute

Umyalelo	gbconfig -s mic-mute
Impendulo	n/y
Inkcazo	Ukufumana zonke ii-microphone (kubandakanywa ii-VB10 kunye nee-microphones ezinwebekayo) zithulisa imo/yokucima ubume. n: cima. y: thula.

Example:
Ukufumana yonke imayikhrofoni ithule/cinywe ubume:

• Umyalelo:
  gbconfig -s mic-mute
• Impendulo:
  n

Iimayikhrofoni zicinyiwe.

gbconfig -umthamo ozenzekelayo

Umyalelo	gbconfig -autovolume {inc | Disemba}
Impendulo	Ukuzuza umthamo kuya kwandiswa okanye kuncitshiswe nge-2 ngesinyathelo ngasinye.
Inkcazo	Ukunyusa okanye ukunciphisa umthamo. inc: Ukwandisa inzuzo yomthamo wemveliso nge-2 ngenyathelo ngalinye. dec: Ukunciphisa inzuzo yomthamo wemveliso nge-2 ngenyathelo ngalinye.

Example:
Ukunyusa umthamo:

• Umyalelo:
  gbconfig -autovolume inc
• Impendulo:
  Umthamo uya kwandiswa nge-2 ngesinyathelo ngasinye.

gbconfig -umthamo

Umyalelo	gbconfig -volume {0,12,24,36,50,62,74,88,100}
Impendulo	Cwangcisa amaxabiso evolumu.
Inkcazo	Umthamo ungamiselwa kuphela kumaxabiso akhankanyiweyo

Example:
Ukuseta ivolyum:

• Umyalelo:
  gbconfig -umthamo 50
• Impendulo:
  Umthamo uya kusetwa ku-50.

gbconfig -s umthamo

Umyalelo	gbconfig -s umthamo
Impendulo	0-100
Inkcazo	Fumana amanani evolumu.

Example:
Ukufumana umthamo:

• Umyalelo:
  gbconfig -s umthamo
• Impendulo:
  50

Umthamo ngama-50.

i-gbconfig -isithethi-sisimumu

Umyalelo	i-gbconfig –isithethi-sisimumu {n | y}
Impendulo	Cwangcisa isithethi sisimumu/ungathuli.
Inkcazo	n, cima y, sisimumu

Example:
Ukuseta isithethi sisimumu:

• Umyalelo:
  gbconfig -isithethi-sisimumu y
• Impendulo:
  Isithethi siya kuba sisimumu.

gbconfig -s isithethi-mute

Umyalelo	gbconfig -s isithethi-mute
Impendulo	n/y
Inkcazo	Fumana iwonga lesithethi.

Example:
Ukufumana ubume besithethi esisisimumu:

• Umyalelo:
  gbconfig -s isithethi-mute
• Impendulo:
  n

Isithethi asithuli.

gbconfig -vb10-mic-dizable

Umyalelo	i-gbconfig -vb10-mic-disable {n |y}
Impendulo	Cwangcisa imakrofoni yangaphakathi ye-vb10 yenziwe/yayicinywa.
Inkcazo	n, yenziwe y, ikhubazekile

Example:
Ukuseta imakrofoni kuvaliwe:

• Umyalelo:
  gbconfig -vb10-mic-dizable y
• Impendulo:
  Umboko we-vb10 uza kucinywa.

gbconfig -s vb10-mic-khubaza

Umyalelo	gbconfig -s vb10-mic-khubaza
Impendulo	n/y
Inkcazo	Fumana imo yemakrofoni.

Example:
Ukufumana ubume bomboko:

• Umyalelo:
  gbconfig -s vb10-mic-khubaza
• Impendulo:
  n

Umbhobho uvuliwe.

Inkqubo:

gbcontrol -device-info

Umyalelo	gbcontrol -device-info
Impendulo	Fumana inguqulo ye-firmware
Inkcazo	Inguqulelo ye-firmware ye-VB10

Example:
Ukufumana inguqulelo ye-firmware:

• Umyalelo:
  gbcontrol -device-info
• Impendulo:
  V1.3.10

gbconfig -hibernate

Umyalelo	gbconfig –hibernate {n |y}
Impendulo	Seta isixhobo ukuba silale.
Inkcazo	n, vuka y, ukulala

Example:
Ukuseta isixhobo sokulala:

• Umyalelo:
  gbconfig –hibernate y
• Impendulo:
  Isixhobo siya kulala.

gbconfig -s hibernate

Umyalelo	gbconfig -s hibernate
Impendulo	n/y
Inkcazo	Fumana imo yokulala.

Example:
Ukufumana imeko yokulala yesixhobo:

• Umyalelo:
  gbconfig -s hibernate
• Impendulo:
  n

Isixhobo siyasebenza.

gbconfig -bonisa-isikhokelo

Umyalelo	gbconfig -bonisa-isikhokelo {n |y}
Impendulo	Bonisa incwadi yesikhokelo yesikrini.
Inkcazo	n, vala y, bonisa

Example:
Ukubonisa isikrini sesikhokelo:

• Umyalelo:
  gbconfig -bonisa-isikhokelo y
• Impendulo:
  Isikrini sesikhokelo siya kubonisa.

gbconfig -s show-guide

Umyalelo	gbconfig -s show-guide
Impendulo	n/y
Inkcazo	Fumana imo yesikrini sesikhokelo. Qaphela ukuba kuphela imo yesikrini sesikhokelo eseta ngesandla esinikwa umva.

Example:
Ukufumana imeko yesikrini sesikhokelo sesixhobo:

• Umyalelo:
  gbconfig -s hibernate
• Impendulo:
  n

Isikrini sesikhokelo asiboniswa.

Amaxwebhu / Izibonelelo

infobit iCam VB80 Platform API Imiyalelo [pdf] Imiyalelo VB80, iCam VB80 Platform API Commands, iCam VB80, Platform API Commands, Platform Commands, API Commands, iCAM VB80 Commands, Commands

Iimbekiselo

• Incwadi yokusebenzisa