infobit iCam VB80 Platform API Iwu

Ozi ngwaahịa

Nkọwapụta:

• Aha ngwaahịa: iCam VB80
• Ụdị akwụkwọ: V1.0.3
• Platform: Akwụkwọ ntuziaka API
• Websaịtị: www.infobitav.com
• Email: info@infobitav.com

Ntuziaka ojiji ngwaahịa

Okwu mmalite

1. Nkwadebe
   Iji malite iji iCam VB80, soro usoro ndị a:
   • Ịtọlite ​​adreesị IP na kọmputa gị
   • Na-enyere ndị ahịa Telnet aka
2. Ịbanye site na interface ahịrị Command
   Nweta interface-ahịrị iwu ka gị na ngwaọrụ na-emekọrịta ihe.
3. Iwu API gafereview
   Ghọta iwu API dị iche iche dị maka nhazi na njikwa.

Ntọala Iwu

gbconfig Iwu
Hazie ntọala metụtara igwefoto na vidiyo site na iji iwu ndị a:

Igwefoto:

• gbconfig --camera-mode
• gbconfig -s camera-mode

Vidiyo:

• gbconfig --hdcp-enable

Ajụjụ A na-ajụkarị (FAQ)

• Q: Kedu ka m ga-esi melite firmware nke iCam VB80?
  A: Iji melite firmware, biko gaa na nke anyị websaịtị maka ntuziaka zuru ezu na nbudata.
• Ajụjụ: Enwere m ike iji iCam VB80 na ngwanrọ ndị ọzọ?
  A: Ee, iCam VB80 na-akwado mwekota na ngwanrọ ndị ọzọ site na iji iwu API enyere.

Akụkọ ngbanwe

Ụdị Doc	Ụbọchị	ọdịnaya	Okwu
V1.0.0	2022/ 04/02	mbụ
V1.0.1	2022/ 04/22	typo edegharịrị
V1.0.2	2023/ 06/05	Tinye API ọhụrụ
V1.0.3	2024/ 03/22	Emegharịrị

Okwu mmalite

Nkwadebe
Akụkụ a na-ewere ngwaọrụ njikwa ndị ọzọ Windows 7 dị ka example. Ị nwekwara ike iji ngwaọrụ njikwa ndị ọzọ.

Ịtọlite ​​adreesị IP na kọmputa gị
E wepụrụ usoro ọrụ zuru ezu ebe a.

Na-enyere ndị ahịa Telnet aka
Tupu ịbanye na ngwaọrụ site na interface-akara interface, jide n'aka na agbanyere onye ahịa Telnet. Site na ndabara, Telnet Client nwere nkwarụ na Windows OS. Ka ịgbanwuo onye ahịa Telnet, mee otu a.

1. Họrọ Mmalite > Ogwe njikwa > Mmemme.
2. N'ime igbe mpaghara Mmemme na atụmatụ, pịa Gbanyụọ ma ọ bụ gbanyụọ atụmatụ Windows.
3. N'ime igbe okwu atụmatụ atụmatụ Windows, họrọ igbe nlele ekwentị.

Ịbanye site na interface ahịrị Command

1. Họrọ Malite > Gbaa ọsọ.
2. N'ime igbe ọsọ ọsọ, tinye cmd wee pịa OK.
3. Ntinye telnet xxxx 23. "23" bụ nọmba ọdụ ụgbọ mmiri.
   Maka exampỌ bụrụ na adreesị IP nke ngwaọrụ ahụ bụ 192.168.20.140, tinye telnet 192.168.20.140 23 wee pịa Tinye.
4. Mgbe ngwaọrụ kpaliri nbanye, ntinye admin wee pịa Tinye, mgbe ahụ ngwaọrụ ahụ na-akpali paswọọdụ, naanị pịa Tinye ozugbo n'ihi na onye ọrụ nchịkwa enweghị paswọọdụ ndabara.

“Ngwaọrụ dị njikere ime iwu CLI API. Ọkwa a ga-egosi Nnabata na VB10/VB80."

Iwu API gafereview

A na-ekewa iwu API ngwaọrụ a n'ụdị ndị a.

• gbconfig: jikwaa nhazi nke ngwaọrụ.
• gbcontrol: jikwaa ngwaọrụ ime ihe.

gbconfig Iwu
A na-ekewa iwu gbconfig n'ime ụdị abụọ gbconfig na iwu gbconfig –s.

Iwu	Nkọwa
gbconfig – igwefoto-mode	Tọọ ọnọdụ nsochi igwefoto maka ngwaọrụ ahụ.
gbconfig -s igwefoto-mode	Nweta ọnọdụ nsochi igwefoto maka ngwaọrụ ahụ.
gbconfig – igwefoto-mbugharị	Tọọ mbugharị igwefoto.
gbconfig -s igwefoto-mbugharị	Nweta mbugharị igwefoto.
gbconfig – igwefoto-savecoord	Chekwaa nhazi dị ka atọrọ 1 ma ọ bụ atọrọ 2.
gbconfig -s -camera-savecoord	Nweta nke atọrọ atọ dabara na nhazi.
gbconfig –camera-loadcoord	Bunye ihe atọrọ kpọmkwem na igwefoto.
gbconfig – igwefoto-enyo	Gbanyụọ/gbanyụọ enyo igwefoto.
gbconfig -s igwefoto-enyo	Nweta ọkwa enyo igwefoto.
gbconfig – igwefoto-ike ugboro	Tọọ ugboro ugboro ọkụ.
gbconfig -s igwefoto-ike ugboro	Nweta ugboro ugboro ọkụ.
gbconfig - igwefoto-geteptz	Nweta ozi eptz.
gbconfig –hdcp-enyere hdmi ike	Tọọ / gbanyụọ HDCP maka HDMI Out
gbconfig -s hdcp-enable	Nweta ọkwa HDCP maka HDMI pụọ
gbconfig –cec-enable	Tọọ CEC gbanye/ gbanyụọ.
gbconfig -s cec-enable	Nweta ọkwa CEC.
gbconfig –cec-cmd hdmi	Hazie iwu CEC maka ịchịkwa ngosi ngbanwu/ gbanyụọ.
gbconfig -s cec-cmd	Nweta iwu CEC maka ịchịkwa ngosi ngbanwu/ gbanyụọ.
gbcontrol –send-cmd hdmi	Zipụ iwu CEC maka ịchịkwa ngosi ngbanwu/ gbanyụọ.
gbconfig -mic-mute	Tọọ ogbi ma ọ bụ gbanyụọ igwe okwu.
gbconfig -s mic-mute	Nweta ogbi ma ọ bụ gbanyụọ igwe okwu.
gbconfig - olu	Tọọ olu ọdịyo.
gbconfig -s olu	Nweta olu ọdịyo.
gbconfig - autovolume	Gbanwee olu ọdịyo (mmụba/belata).

gbcontrol Iwu

Iwu	Nkọwa
gbcontrol –send-cmd hdmi	Ka izipu iwu CEC na ngosipụta ozugbo.

Ntọala Iwu

gbconfig Iwu

Igwefoto:

gbconfig – igwefoto-mode

Iwu	gbconfig –mode igwefoto {nkịtị | nhazi akpaaka | ọkà okwu nsochi | ihe ngosi}
Nzaghachi	Igwefoto ga-agbanwe gaa na ọnọdụ nsochi akọwapụtara.
Nkọwa	Tọọ ọnọdụ nsochi igwefoto site na ndị a: • nkịtị: Ndị ọrụ kwesịrị iji aka hazie igwefoto ka ọ bụrụ akụkụ kwesịrị ekwesị. • autoframing: Igwefoto na-eso ndị mmadụ na-akpaghị aka dabere na njirimara ihu. • nsuso ọkà okwu: Igwefoto na-esokwa ọkà okwu na-akpaghị aka dabere na njirimara okwu. • ihe ngosi: Igwefoto na-esochi onye ngosi na-akpaghị aka mgbe niile.

ExampLe:
Ka ịtọọ ọnọdụ nsochi ka ọ bụrụ nhazi akpaaka:

Iwu:
gbconfig – igwefoto-mode autoframing

Azịza ya:
A ga-edobe ọnọdụ nsochi igwefoto ka ọ bụrụ akpaaka.

gbconfig -s igwefoto-mode

Iwu	gbconfig -s igwefoto-mode
Nzaghachi	{nkịtị | akpaaka | nkwuputa okwu | ihe ngosi}
Nkọwa	Nweta ọnọdụ nsochi igwefoto.

ExampLe:
Iji nweta ọnọdụ nsochi igwefoto:

• Iwu:
  gbconfig -s igwefoto-mode
• Azịza ya:
  nkịtị

Nke a na-egosi na edobere ọnọdụ nsochi ka “nkịtị”.

gbconfig – igwefoto-mbugharị

Iwu	gbconfig -camera-mbugharị {[100, gbconfig -s camera-phymaxzoom]}

Nzaghachi	A ga-agbanwe mbugharị igwefoto.
Nkọwa	Tọọ mbugharị igwefoto. Uru dị sitere na 100% (1x) ruo na igwefoto mbugharị anụ ahụ kacha. Maka examplee, ọ bụrụ na mbugharị ahụ kachasị nke igwefoto bụ 500, oke mbugharị dị na ya bụ [100]. (500x ruo 1x)

ExampLe:
Ka ịtọọ mbugharị igwefoto ka 100:

• Iwu:
  gbconfig -camera-mbugharị 100
• Azịza ya:
  A ga-edozi mbugharị igwefoto ka ọ bụrụ 1x.

gbconfig -s igwefoto-mbugharị

Iwu	gbconfig -s igwefoto-mbugharị
Nzaghachi	xxx
Nkọwa	Nweta mbugharị igwefoto.

ExampLe:
Iji nweta mbugharị igwefoto:

• Iwu:
  gbconfig -s igwefoto-mbugharị
• Azịza ya:
  100

Mbugharị igwefoto bụ 1x.

gbconfig – igwefoto-savecoord

Iwu	gbconfig – igwefoto-savecoord {1|2}
Nzaghachi	A ga-echekwa nhazi nke ugbu a ka edobere 1 ma ọ bụ 2.
Nkọwa	Chekwaa nhazi ugbu a na atọrọ akọwapụtara. A na-enye presets 1 na 2.

ExampLe:
Ka ịtọọ nhazi ugbu a ka atọrọ 1:

• Iwu:
  gbconfig -camera-savecoord 1
• Azịza ya:
  A ga-echekwa ihe nhazi ahụ ka atọrọ 1.

gbconfig -s -camera-savecoord

Iwu	gbconfig –s igwefoto-savecoord {1 | 2}
Nzaghachi	eziokwu/ụgha
Nkọwa	Iji nweta ma ọ bụrụ na echekwabara nhazi ahụ na atọrọ akọwapụtara. • Eziokwu: Edokwala ihe nhazi ahụ na atọrọ ahaziri ahazi. • Ụgha: A naghị echekwa ihe nhazi ahụ na ntọala akọwapụtara.

ExampLe:
Iji nweta ma ọ bụrụ na echekwabara nhazi ugbu a na 1 atọrọ:

• Iwu:
  gbconfig –s igwefoto-savecoord 1
• Azịza ya:
  ụgha

Echekwaghị ihe nhazi ahụ ka atọrọ 1.

gbconfig –camera-loadcoord

Iwu	gbconfig –camera-loadcoord {1 | 2}
Nzaghachi	A ga-ebunye ihe atọrọ akọwapụtara n'ime igwefoto.
Nkọwa	Bunye ihe atọrọ 1/2 na igwefoto.

ExampLe:
Ka ibunye atọrọ 1 na igwefoto:

• Iwu:
  gbconfig -camera-loadcoord 1
• Azịza ya:
  A ga-ebunye ihe atọrọ 1 na igwefoto.

gbconfig – igwefoto-enyo

Iwu	gbconfig –camera-mirror {n | y}
Nzaghachi	A ga-agbanye ma ọ bụ gbanyụọ ọrụ mirroring igwefoto.
Nkọwa	Ka ịgbanwuo ma ọ bụ gbanyụọ ọrụ mirroring igwefoto. • n: Apụpụ. • y: Na-enyo enyo.

ExampLe:
Ka ịgbanwuo mirroring:

• Iwu:
  gbconfig –camera-mirror y
• Azịza ya:
  A ga-agbanye ọrụ mirroring igwefoto.

gbconfig -s igwefoto-enyo

Iwu	gbconfig -s igwefoto-enyo
Nzaghachi	n/y
Nkọwa	Iji nweta ọkwa mirroring. • n: Apụpụ. • y: Na-enyo enyo.

ExampLe:
Iji nweta ọkwa enyo:

• Iwu:
  gbconfig -s igwefoto-enyo
• Azịza ya:
  y

Agbanyere ọrụ mirroring igwefoto.

gbconfig -camera-powerfreq

Iwu	gbconfig -camera-powerfreq {50 | 60}
Nzaghachi	A ga-agbanwe ugboro ole ka ọ bụrụ 50/60.
Nkọwa	Ka ịgbanwee ugboro eriri ọkụ iji gbochie ịnyagharị na vidiyo. • 50: Gbanwee ugboro ka ọ bụrụ 50Hz. • 60: Gbanwee ugboro ka ọ bụrụ 60Hz.

ExampLe:
Ka ịgbanwee ugboro ọkụ ọkụ ka ọ bụrụ 60Hz:

• Iwu:
  gbconfig -camera-powerfreq 60
• Azịza ya:
  A ga-agbanwe ugboro eriri ọkụ ka ọ bụrụ 60Hz.

gbconfig –s igwefoto-powerfreq

Iwu	gbconfig –s igwefoto-powerfreq
Nzaghachi	n/50/60
Nkọwa	Nweta ugboro ọkụ ọkụ. • 50: Gbanwee ugboro ka ọ bụrụ 50Hz. • 60: Gbanwee ugboro ka ọ bụrụ 60Hz.

ExampLe:
Iji nweta ugboro ole ọkụ:

• Iwu:
  gbconfig –s igwefoto-powerfreq
• Azịza ya:
  60

Ọrụ mgbochi flicker bụ 60Hz.

Vidiyo:

gbconfig -hdcp-enyere

Iwu	gbconfig –hdcp-enable hdmi {n | akpaaka | hdcp14 | hdcp22}
Nzaghachi	A ga-enyere ma ọ bụ gbanyụọ HDCP nke HDMI Out.
Nkọwa	Hazie ike HDCP maka HDMI Out. • n: Gbanyụọ HDCP. • akpaaka: A ga-agbanye / gbanyụọ HDCP na-akpaghị aka dabere na ọnọdụ dị adị. eg mgbe edobere “akpaaka” ma ọ bụrụ na isi mmalite na HDMI ngosi na-akwado HDCP 2.2, akara ngosi HDMI ga-abụ HDCP 2.2 ezoro ezo; ọ bụrụ na isi iyi anaghị akwado HDCP, HDCP nke HDMI mmepụta mgbaàmà ga-apụ. • hdcp14: A ga-edozi HDCP nke HDMI Out ka 1.4. • hdcp22: A ga-edozi HDCP nke HDMI Out ka 2.2.

ExampLe:
Ka ịtọọ HDCP nke HDMI ka ọ bụrụ 2.2:

• Iwu:
  gbconfig –hdcp-enyere hdmi hdcp22
• Azịza ya:
  HDCP nke HDMI ka edobere ka 2.2.

gbconfig -s hdcp-enable

Iwu	gbconfig -s hdcp-enable
Nzaghachi	n/auto/hdcp14/hdcp22
Nkọwa	Nweta ọkwa HDCP nke HDMI Out.

ExampLe:
Iji nweta ọkwa HDCP nke HDMI:

• Iwu:
  gbconfig -s hdcp-enable
• Azịza ya:
  n

Agbanyụrụ HDCP nke HDMI.

gbconfig –cec-enable

Iwu	gbconfig –cec-enable {n | y}
Nzaghachi	A ga-agbanye ma ọ bụ gbanyụọ CEC.
Nkọwa	Tọọ ma ọ bụ gbanyụọ CEC. n: Gbanyụọ CEC. y: Gbanwuo CEC.

ExampLe:
Ka ịgbanwuo CEC:

• Iwu:
  gbconfig –cec-enyere y
• Azịza ya:
  A ga-agbanye CEC.

gbconfig -s cec-enable

Iwu	gbconfig -s cec-enable
Nzaghachi	n/y
Nkọwa	Nweta ọkwa CEC. n: CEC agbanyụrụ. y: CEC agbanyere. Mara: Ozugbo CEC gbanyụrụ, iwu “GB control –sink power” agaghị adị, na ngbanwe n'etiti ịrụ ọrụ nkịtị na njikere maka VB10 ga-adịkwa irè.

ExampLe:
Iji nweta ọkwa CEC:

• Iwu:
  gbconfig -s cec-enable
• Azịza ya:
  y

Agbanyere CEC.

gbcontrol – sinkpower

Iwu	gbcontrol –sinkpower {na | gbanyụọ}
Nzaghachi	A ga-eziga iwu CEC maka ịchịkwa ngosi ngbanwu/ gbanyụọ site na HDMI Ọpụ na ejikọrọ ngosi.
Nkọwa	Ka izipu iwu CEC maka njikwa ngosi ma ọ bụ gbanyụọ. Na: Zipụ iwu CEC maka ịchịkwa ngosi. Gbanyụọ: Zipụ iwu CEC maka ịchịkwa ngosi gbanyụọ.

ExampLe:
Iji zipu iwu CEC maka ịchịkwa ngosi na:

• Iwu:
  gbcontrol – sinkpower on
• Azịza ya:
  A ga-eziga iwu CEC ka ọ rụọ ọrụ na ngosi CEC na-akwado site na HDMI pụọ.

gbconfig –cec-cmd hdmi

Iwu	gbconfig –cec-cmd hdmi {na | gbanyụọ} {CmdStr}
Nzaghachi	A ga-ahazi ma chekwaa iwu CEC maka ịchịkwa ngosi ịgbanwu/ gbanyụọ na

	ngwaọrụ.
Nkọwa	Ka ịhazie na chekwaa iwu CEC maka ịchịkwa ngosi ma ọ bụ gbanyụọ na ngwaọrụ ahụ. Na: Hazie iwu CEC maka ịchịkwa ngosi na. Gbanyụọ: Hazie iwu CEC maka ịchịkwa ngosi gbanyụọ. CmdStr: Iwu CEC na eriri ma ọ bụ usoro hex. Maka exampN'ezie, iwu CEC na-enye ike na ngosi nwere ike ịbụ "40 04".

ExampLe:
Iji hazie ma chekwaa iwu CEC "40 04" maka ịgbanye ngosi na ngwaọrụ:

• Iwu:
  gbconfig –cec-cmd hdmi na 4004
• Azịza ya:
  A ga-echekwa iwu CEC iji mee ka ngosi CEC kwadoro "40 04" na ngwaọrụ ahụ.

gbconfig -s cec-cmd

Iwu	gbconfig -s cec-cmd
Nzaghachi	HDMI NA: xxxx HDMI gbanyụrụ: xxxx
Nkọwa	Nweta iwu CEC maka ịchịkwa ngosi ngbanyụ na gbanyụọ. Ÿ na: Hazie iwu CEC maka ịchịkwa ngosi na. Gbanyụọ: Hazie iwu CEC maka ịchịkwa ngosi gbanyụọ. Ÿ CmdStr: Iwu CEC na eriri ma ọ bụ usoro hex. Maka example, CEC Iwu maka ike na ngosi nwere ike ịbụ "40 04".

ExampLe:
Iji nweta iwu CEC maka ịchịkwa ngosi ma gbanyụọ:

• Iwu:
  gbconfig -s -cec-cmd
• Azịza ya:
  • HDMI NA: 4004
  • HDMI gbanyụrụ: ff36

Iwu CEC na-enye ike na ngosi CEC nyere aka: bụ "40 04"; Iwu ịgbanyụ ihe ngosi: bụ “ff 36”.

gbcontrol –send-cmd hdmi

Iwu	gbcontrol –send-cmd hdmi {CmdStr}
Nzaghachi	A ga-eziga iwu CEC {CmdStr} na ngosipụta ozugbo maka nnwale.
Nkọwa	Ka izipu iwu CEC {CmdStr} na ngosipụta ozugbo. Mara: Agaghị echekwa iwu a na ngwaọrụ.

ExampLe:
Iji zipu iwu CEC “44 04” na ngosipụta:

• Iwu:
  gbcontrol –send-cmd hdmi 4004
• Azịza ya:
  A ga-eziga iwu CEC "40 04" na ngosipụta ozugbo.

gbconfig - ike ụmụ oke

Iwu	gbconfig – oke-enable {n |y}
Nzaghachi	Agbanyere ma ọ bụ gbanyụọ atụmatụ Miracast over Infrastructure
Nkọwa	n, nkwarụ. y, agbanyere.

ExampLe:
Ka ịtọọ Miracast n'elu akụrụngwa dịka enyere ya aka:

• Iwu:
  gbconfig – ụmụ oke-enyere y
• Azịza ya:
  A ga-agbanye Miracast n'elu njirimara akụrụngwa.

gbconfig -s ụmụ oke-enyere

Iwu	gbconfig -s ụmụ oke-enyere
Nzaghachi	n/y
Nkọwa	n, nkwarụ. y, agbanyere.

ExampLe:
Iji nweta ọkwa Miracast n'elu akụrụngwa:

• Iwu:
  gbconfig -s ụmụ oke-enyere
• Azịza ya:
  n

Akwụsịla Miracast n'elu akụrụngwa.

gbconfig – ngosi-ụdị

Iwu	gbconfig – ngosi-mode {otu onye | abuo
Nzaghachi	Tọọ okirikiri nhọrọ ukwuu ka ọ bụrụ otu, kewaa
Nkọwa	Single na Split bụ nhazi akpaaka,

ExampLe:
Ka ịtọọ okirikiri nhọrọ ukwuu ka ọ bụrụ ụkpụrụ ntuziaka:

• Iwu:
  gbconfig – ngosi-ụdị otu
• Azịza ya:
  Ụdị nhazi ihe ngosi tụgharịrị bụrụ otu.

gbconfig -s ngosi-mode

Iwu	gbconfig -s ngosi-mode
Nzaghachi	otu / dual / akwụkwọ ntuziaka
Nkọwa	otu, akpaaka otu okirikiri nhọrọ ukwuu, akwụkwọ ntuziaka okirikiri nhọrọ ukwuu nke akpaaka, maka ntọala nhazi akwụkwọ ntuziaka

ExampLe:
Iji nweta ọkwa ọnọdụ ngosi:

• Iwu:
  gbconfig -s ngosi-mode
• Azịza ya:
  otu

Ụdị ngosi bụ otu.

Audio:

gbconfig -mic-mute

Iwu	gbconfig -mic-mute {n | y}
Nzaghachi	A ga-edozi igwe okwu niile ka ịgbanwuo/ gbanyụọ ogbi.
Nkọwa	Tọọ ma ọ bụ gbanyụọ igwe okwu niile (gụnyere VB10 na igwe okwu ịgbasawanye). n: daa ogbi. y: daa ogbi.

ExampLe:
Ka ịtọọ ụda okwu niile gbanyụọ:

• Iwu:
  gbconfig –mic-mute n
• Azịza ya:
  A ga-edozi igwe okwu ka ọ dara ogbi.

gbconfig -s mic-mute

Iwu	gbconfig -s mic-mute
Nzaghachi	n/y
Nkọwa	Ka ịnweta igwe okwu niile (gụnyere VB10 na igwe okwu gbasaa) daa ogbi on/ gbanyụọ ọnọdụ. n: daa ogbi. y: daa ogbi.

ExampLe:
Iji nweta ogbi ma ọ bụ gbanyụọ igwe okwu niile:

• Iwu:
  gbconfig -s mic-mute
• Azịza ya:
  n

Agbanyụrụ igwe okwu.

gbconfig - olu akpaaka

Iwu	gbconfig - autovolume {inc | Dec}
Nzaghachi	A ga-abawanye ma ọ bụ belata uru olu site na 2 kwa nzọụkwụ.
Nkọwa	Ka iwelie ma ọ bụ ibelata olu. inc: Iji bulie uru nke mmepụta olu site na 2 kwa nzọụkwụ. dec: Iji belata uru nke mmepụta olu site na 2 kwa nzọụkwụ.

ExampLe:
Ka iwelie olu:

• Iwu:
  gbconfig -autovolume Inc
• Azịza ya:
  A ga-abawanye olu site na 2 kwa nzọụkwụ.

gbconfig - olu

Iwu	gbconfig – mpịakọta {0,12,24,36,50,62,74,88,100}
Nzaghachi	Tọọ ụkpụrụ olu.
Nkọwa	Enwere ike ịhazi ụda naanị ka ọ bụrụ ụkpụrụ akọwapụtara

ExampLe:
Iji tọọ olu:

• Iwu:
  gbconfig - mpịakọta 50
• Azịza ya:
  A ga-edozi olu ka ọ bụrụ 50.

gbconfig -s olu

Iwu	gbconfig -s olu
Nzaghachi	0-100
Nkọwa	Nweta ụkpụrụ olu.

ExampLe:
Iji nweta olu:

• Iwu:
  gbconfig -s olu
• Azịza ya:
  50

Olu ya bụ 50.

gbconfig - ọkà okwu-ogbi

Iwu	gbconfig -speaker-mute {n | y}
Nzaghachi	Tọọ ogbi/mechie ọnụ okwu.
Nkọwa	n, wepụ y, ogbi

ExampLe:
Ka ịtọọ ọkà okwu daa ogbi:

• Iwu:
  gbconfig –ọkà okwu-ogbi y
• Azịza ya:
  Ọkà okwu ga-ada ogbi.

gbconfig -s ọkà okwu-ogbi

Iwu	gbconfig -s ọkà okwu-ogbi
Nzaghachi	n/y
Nkọwa	Nweta ọkwa ọkà okwu.

ExampLe:
Iji nweta ọkwa ogbi nke ọkà okwu:

• Iwu:
  gbconfig -s ọkà okwu-ogbi
• Azịza ya:
  n

E meghere igwe okwu.

gbconfig –vb10-mic-gbanyụọ

Iwu	gbconfig –vb10-mic-gbanyụọ {n |y}
Nzaghachi	Tọọ igwe okwu dị n'ime nke vb10 agbanyere/ gbanyụọ.
Nkọwa	n, agbanyere y, nkwarụ

ExampLe:
Ka ịtọọ igweokwu ahụ nwere nkwarụ:

• Iwu:
  gbconfig –vb10-mic-gbanyụọ y
• Azịza ya:
  A ga-enwe nkwarụ igwe okwu vb10.

gbconfig -s vb10-mic-gbanyụọ

Iwu	gbconfig -s vb10-mic-gbanyụọ
Nzaghachi	n/y
Nkọwa	Nweta ọkwa igweokwu.

ExampLe:
Iji nweta ọkwa igweokwu:

• Iwu:
  gbconfig -s vb10-mic-gbanyụọ
• Azịza ya:
  n

Agbanyere igweokwu ahụ.

Sistemu:

gbcontrol - ngwaọrụ-ozi

Iwu	gbcontrol - ngwaọrụ-ozi
Nzaghachi	Nweta ụdị firmware ahụ
Nkọwa	Ụdị firmware maka VB10

ExampLe:
Iji nweta ụdị firmware:

• Iwu:
  gbcontrol - ngwaọrụ-ozi
• Azịza ya:
  V1.3.10

gbconfig - hibernate

Iwu	gbconfig –hibernate {n |y}
Nzaghachi	Tọọ ngwaọrụ ka ọ hie ụra.
Nkọwa	n, kulie y, ura

ExampLe:
Ka ịtọọ ngwaọrụ ụra:

• Iwu:
  gbconfig –hibernate y
• Azịza ya:
  Ngwaọrụ ga-ehi ụra.

gbconfig -s hibernate

Iwu	gbconfig -s hibernate
Nzaghachi	n/y
Nkọwa	Nweta ọnọdụ ihi ụra.

ExampLe:
Iji nweta ọnọdụ ihi ụra nke ngwaọrụ:

• Iwu:
  gbconfig -s hibernate
• Azịza ya:
  n

Ngwaọrụ na-arụ ọrụ.

gbconfig – show-nduzi

Iwu	gbconfig –show-guide {n |y}
Nzaghachi	Gosi akwụkwọ ntuziaka ihuenyo ndu.
Nkọwa	n, nso y, gosi

ExampLe:
Iji gosi ihuenyo nduzi:

• Iwu:
  gbconfig – show-nduzi y
• Azịza ya:
  Ihuenyo ndu ga-egosi.

gbconfig -s show-guide

Iwu	gbconfig -s show-guide
Nzaghachi	n/y
Nkọwa	Nweta ọkwa ihuenyo nduzi. Rịba ama na ọ bụ naanị ọkwa ihuenyo ntuziaka ejiri aka edoziri ka eweghachitere azụ.

ExampLe:
Iji nweta ọkwa ihuenyo ntuziaka nke ngwaọrụ:

• Iwu:
  gbconfig -s hibernate
• Azịza ya:
  n

Egosighị ihuenyo nduzi.

Akwụkwọ / akụrụngwa

infobit iCam VB80 Platform API Iwu [pdf] Ntuziaka VB80, iCam VB80 Platform API Iwu, iCam VB80, Platform API Iwu, Platform Commands, API Commands, iCAM VB80 Iwu, Iwu.

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ