infobit iCam VB80 Platform API Commands

Cov ntaub ntawv khoom

Specifications:

• Khoom npe: iCam VB80
• Cov ntaub ntawv Version: v 1.0.3
• Platform: API Commands Phau Ntawv Qhia
• Webqhov chaw: www.infobitav.com
• Email: yog info@infobitav.com

Cov lus qhia siv khoom

Taw qhia

1. Kev npaj
   Txhawm rau pib siv iCam VB80, ua raws cov kauj ruam no:
   • Teem IP chaw nyob hauv koj lub computer
   • Ua kom Telnet Client
2. Nkag mus los ntawm Command-line Interface
   Nkag mus rau qhov hais kom ua kab interface kom cuam tshuam nrog lub cuab yeej.
3. API Commands Tshajview
   Nkag siab qhov sib txawv API cov lus txib muaj rau kev teeb tsa thiab tswj.

Cov Txheej Txheem

gbconfig cov lus txib
Configure chaw cuam tshuam nrog lub koob yees duab thiab yees duab siv cov lus txib hauv qab no:

Lub koob yees duab:

• gbconfig --camera-mode
• gbconfig -s camera-mode

Video:

• gbconfig --hdcp-enable

Cov lus nug nquag nug (FAQ)

• Q: Kuv yuav hloov kho lub firmware ntawm iCam VB80 li cas?
  A: Txhawm rau hloov kho lub firmware, thov mus saib peb website kom ntxaws cov lus qhia thiab downloads.
• Q: Kuv puas tuaj yeem siv iCam VB80 nrog software thib peb?
  A: Yog lawm, iCam VB80 txhawb kev koom ua ke nrog cov software thib peb siv cov lus txib API muab.

Kev kho keeb kwm

Cov ntawv Doc	Hnub tim	Cov ntsiab lus	Lus hais
v 1.0.0	2022/ 04/02	pib
v 1.0.1	2022/ 04/22	Revised typo
v 1.0.2	2023/ 06/05	Ntxiv API tshiab
v 1.0.3	2024/ 03/22	Hloov kho

Taw qhia

Kev npaj
Tshooj lus no yuav siv lub cuab yeej thib peb tswj Windows 7 ua tus example. Koj tuaj yeem siv lwm yam khoom siv tswj hwm.

Teem IP chaw nyob hauv koj lub computer
Cov kauj ruam ua haujlwm ntxaws raug tshem tawm ntawm no.

Ua kom Telnet Client
Ua ntej nkag mus rau hauv lub cuab yeej ntawm cov kab lus hais kom ua, nco ntsoov tias Telnet Client tau qhib. Los ntawm lub neej ntawd, Telnet Client yog neeg xiam hauv Windows OS. Txhawm rau qhib Telnet Client, ua raws li hauv qab no.

1. Xaiv Pib> Tswj Vaj Huam Sib Luag> Kev Pabcuam.
2. Hauv Cov Kev Pabcuam thiab Cov Txheej Txheem hauv lub npov, nyem Tig Windows nta rau lossis tawm.
3. Hauv Windows Features dialog box, xaiv Tel lub net Client check box.

Nkag mus los ntawm Command-line Interface

1. Xaiv Pib> Khiav.
2. Hauv Khiav dialog box, sau cmd ces nyem OK.
3. Input telnet xxxx 23. “23” yog tus lej chaw nres nkoj.
   Rau example, yog hais tias tus ntaus ntawv tus IP chaw nyob yog 192.168.20.140, input telnet 192.168.20.140 23 thiab ces nias Enter.
4. Thaum lub cuab yeej prompts ID nkag mus, input admin thiab nias Enter, tom qab ntawd lub cuab yeej prompts password, tsuas yog nias Enter ncaj qha vim hais tias tus neeg siv admin tsis muaj tus password qub.

"Lub cuab yeej tau npaj ua tiav CLI API hais kom ua. Cov xwm txheej yuav pom Zoo Siab Txais Tos rau VB10 / VB80. "

API Commands Tshajview

Cov cuab yeej no API cov lus txib tau muab faib ua hom hauv qab no.

• gbconfig: tswj cov configurations ntawm lub cuab yeej.
• gbcontrol: tswj lub cuab yeej ua ib yam dab tsi.

gbconfig cov lus txib
gbconfig cov lus txib feem ntau muab faib ua ob hom gbconfig thiab gbconfig -s cov lus txib.

Cov lus txib	Kev piav qhia
gbconfig - lub koob yees duab hom	Teem lub koob yees duab taug qab hom rau lub cuab yeej.
gbconfig -s lub koob yees duab hom	Tau txais lub koob yees duab taug qab hom rau lub cuab yeej.
gbconfig – koob yees duab-zoom	Teem lub koob yees duab zoom.
gbconfig -s camera-zoom	Tau lub koob yees duab zoom.
gbconfig -lub koob yees duab-savecoord	Txuag cov kev tswj xyuas raws li preset 1 lossis preset 2.
gbconfig -s -lub koob yees duab-savecoord	Tau qhov twg preset sib haum mus rau lub coordinates.
gbconfig - lub koob yees duab-loadcoord	Load tshwj xeeb preset rau lub koob yees duab.
gbconfig - lub koob yees duab-daim iav	Qhib / tawm lub koob yees duab mirroring.
gbconfig -s lub koob yees duab-daim iav	Tau txais lub koob yees duab mirroring xwm txheej.
gbconfig – lub koob yees duab-power freq	Teem fais fab zaus zaus.
gbconfig -s lub koob yees duab-power freq	Tau powerline zaus.
gbconfig – koob yees duab-geteptz	Tau txais cov ntaub ntawv eptz.
gbconfig -hdcp-enable hdmi	Teem HDCP rau / tawm rau HDMI Out
gbconfig -s hdcp-enable	Tau txais HDCP xwm txheej rau HDMI tawm
gbconfig -cec-enable	Teem CEC enable/disable.
gbconfig -s cec-enable	Tau txais CEC xwm txheej.
gbconfig -cec-cmd hdmi	Configure CEC commands rau kev tswj cov zaub on/off.
gbconfig -s cec-cmd	Tau txais CEC cov lus txib rau kev tswj cov zaub rau / tawm.
gbcontrol -xa-cmd hdmi	Xa CEC cov lus txib rau kev tswj cov zaub rau / tawm.
gbconfig -mic-mute	Teem lub microphone mute rau / tawm.
gbconfig -s mic-mute	Tau txais microphone mute rau / tawm xwm txheej.
gbconfig - ntim	Teem suab ntim.
gbconfig -s ntim	Tau lub ntim ntim.
gbconfig – autovolume	Kho lub ntim ntim (nce / txo).

gbcontrol cov lus txib

txib	Kev piav qhia
gbcontrol -xa-cmd hdmi	Xa CEC hais kom ua rau cov zaub tam sim ntawd.

Cov Txheej Txheem

gbconfig cov lus txib

Lub koob yees duab:

gbconfig - lub koob yees duab hom

txib	gbconfig –lub koob yees duab hom {ib txwm | pib framing | hais lus taug qab | kev nthuav qhia}
Teb	Lub koob yees duab yuav hloov mus rau hom kev taug qab uas tau teev tseg.
Kev piav qhia	Teem lub koob yees duab taug qab hom los ntawm cov hauv qab no: • ib txwm: Cov neeg siv yuav tsum tau kho lub koob yees duab rau lub kaum sab xis tsim nyog manually. • autoframing: Lub koob yees duab cia li taug qab cov neeg raws li lub ntsej muag paub. • Kev taug qab tus neeg hais lus: Lub koob yees duab cia li taug qab tus neeg hais lus raws li kev paub hais lus. • presentertracking: Lub koob yees duab cia li taug qab tus presenter ib txwm.

Example:
Txhawm rau teeb tsa hom kev taug qab mus rau nws pib-framing:

Hais kom ua:
gbconfig - lub koob yees duab hom autoframing

Teb:
Lub koob yees duab taug qab hom yuav raug teem rau autoframing.

gbconfig -s lub koob yees duab hom

txib	gbconfig -s lub koob yees duab hom
Teb	{ib txwm | autoframing | hais lus | kev nthuav qhia}
Kev piav qhia	Tau lub koob yees duab taug qab hom.

Example:
Kom tau txais lub koob yees duab taug qab hom:

• Hais kom ua:
  gbconfig -s lub koob yees duab hom
• Teb:
  ib txwm

Qhov no qhia tau hais tias hom kev taug qab yog teem li "ib txwm".

gbconfig – koob yees duab-zoom

txib	gbconfig –camera-zoom {[100, gbconfig -s camera-phymaxzoom]}

Teb	Lub koob yees duab zoom yuav raug hloov.
Kev piav qhia	Teem lub koob yees duab zoom. Tus nqi muaj nyob ntawm 100% (1x) mus rau lub koob yees duab Max lub cev zoom. Rau example, yog hais tias lub koob yees duab lub siab tshaj plaws lub cev zoom yog 500, qhov muaj ntau yam ntawm lub zoom yog [100, 500]. (1x txog 5x)

Example:
Txhawm rau teeb tsa lub koob yees duab zoom li 100:

• Hais kom ua:
  gbconfig – koob yees duab-zoom 100
• Teb:
  Lub koob yees duab zoom yuav raug teem rau 1x.

gbconfig -s camera-zoom

txib	gbconfig -s camera-zoom
Teb	xxx
Kev piav qhia	Tau lub koob yees duab zoom.

Example:
Kom tau txais lub koob yees duab zoom:

• Hais kom ua:
  gbconfig -s camera-zoom
• Teb:
  100

Lub koob yees duab zoom yog 1x.

gbconfig -lub koob yees duab-savecoord

txib	gbconfig -lub koob yees duab-savecoord {1|2}
Teb	Tam sim no kev tswj hwm yuav raug cawm rau preset 1 lossis 2.
Kev piav qhia	Txuag tam sim no coordinates rau lub preset teev. Presets 1 thiab 2 muaj.

Example:
Txhawm rau teem caij tam sim no rau preset 1:

• Hais kom ua:
  gbconfig –lub koob yees duab-savecoord 1
• Teb:
  Cov coordinates yuav raug khaws cia rau preset 1.

gbconfig -s -lub koob yees duab-savecoord

txib	gbconfig –s lub koob yees duab-savecoord {1 | 2}
Teb	tseeb/false
Kev piav qhia	Txhawm rau kom tau txais yog tias cov kev tswj hwm tau khaws cia rau qhov teev cia. • Muaj tseeb: Cov kev tswj xyuas tau raug khaws cia rau hauv qhov teev ua ntej lawm. • Tsis tseeb: Cov kev tswj xyuas tsis raug khaws cia rau hauv qhov teev ua ntej.

Example:
Yuav kom tau txais yog tias tam sim no coordinates raug cawm rau preset 1:

• Hais kom ua:
  gbconfig –s lub koob yees duab-savecoord 1
• Teb:
  cuav

Cov kev tswj xyuas tsis raug khaws cia rau preset 1.

gbconfig - lub koob yees duab-loadcoord

txib	gbconfig –lub koob yees duab-loadcoord {1 | 2}
Teb	Cov txheej txheem preset yuav muab tso rau hauv lub koob yees duab.
Kev piav qhia	Load preset 1/2 rau lub koob yees duab.

Example:
Txhawm rau thauj khoom preset 1 rau lub koob yees duab:

• Hais kom ua:
  gbconfig – koob yees duab-loadcoord 1
• Teb:
  Preset 1 yuav muab tso rau hauv lub koob yees duab.

gbconfig - lub koob yees duab-daim iav

txib	gbconfig –camera-mirror {n | y}
Teb	Lub koob yees duab mirroring muaj nuj nqi yuav qhib los yog tua.
Kev piav qhia	Txhawm rau qhib lossis kaw lub koob yees duab mirroring muaj nuj nqi. • n: Mirroring off. • y: Mirroring rau.

Example:
Txhawm rau qhib mirroring:

• Hais kom ua:
  gbconfig – koob yees duab daim iav y
• Teb:
  Lub koob yees duab mirroring muaj nuj nqi yuav qhib.

gbconfig -s lub koob yees duab-daim iav

txib	gbconfig -s lub koob yees duab-daim iav
Teb	n/y
Kev piav qhia	Kom tau txais cov xwm txheej mirroring. • n: Mirroring off. • y: Mirroring rau.

Example:
Kom tau txais qhov xwm txheej mirroring:

• Hais kom ua:
  gbconfig -s lub koob yees duab-daim iav
• Teb:
  y

Lub koob yees duab mirroring muaj nuj nqi yog qhib.

gbconfig – koob yees duab-powerfreq

txib	gbconfig – koob yees duab-powerfreq {50 | 60}
Teb	Qhov zaus yuav raug hloov mus rau 50/60.
Kev piav qhia	Txhawm rau hloov lub zog hluav taws xob zaus los tiv thaiv flicker hauv video. • 50: Hloov zaus mus rau 50Hz. • 60: Hloov zaus mus rau 60Hz.

Example:
Txhawm rau hloov lub zog zaus zaus mus rau 60Hz:

• Hais kom ua:
  gbconfig – koob yees duab-powerfreq 60
• Teb:
  Lub zog hluav taws xob zaus yuav raug hloov mus rau 60Hz.

gbconfig –s lub koob yees duab-powerfreq

txib	gbconfig –s lub koob yees duab-powerfreq
Teb	n/50/60
Kev piav qhia	Tau txais lub zog hluav taws xob zaus. • 50: Hloov zaus mus rau 50Hz. • 60: Hloov zaus mus rau 60Hz.

Example:
Yuav kom tau txais lub zog fais fab zaus:

• Hais kom ua:
  gbconfig –s lub koob yees duab-powerfreq
• Teb:
  60

Anti-flicker muaj nuj nqi yog 60Hz.

Video:

gbconfig -hdcp-enable

txib	gbconfig –hdcp-enable hdmi {n | auto | hdcp14 | hdcp22}
Teb	Lub HDCP ntawm HDMI Out yuav qhib los yog xiam oob qhab.
Kev piav qhia	Configure HDCP muaj peev xwm rau HDMI Out. • n: Tua HDCP. • auto: HDCP yuav qhib / tawm tau raws li qhov xwm txheej tiag tiag. Piv txwv li thaum "auto" raug teeb tsa, yog tias ob qho tib si lub hauv paus thiab HDMI zaub txhawb nqa HDCP 2.2, HDMI tso zis teeb liab yuav yog HDCP 2.2 encrypted; Yog tias lub hauv paus tsis txhawb HDCP, HDCP ntawm HDMI tso zis teeb liab yuav raug kaw. • hdcp14: Lub HDCP ntawm HDMI Tawm yuav raug teeb tsa li 1.4. • hdcp22: Lub HDCP ntawm HDMI Tawm yuav raug teeb tsa li 2.2.

Example:
Txhawm rau teeb tsa HDCP ntawm HDMI tawm li 2.2:

• Hais kom ua:
  gbconfig -hdcp-enable hdmi hdcp22
• Teb:
  Lub HDCP ntawm HDMI tawm yog teem raws li 2.2.

gbconfig -s hdcp-enable

txib	gbconfig -s hdcp-enable
Teb	n/auto/hdcp14/hdcp22
Kev piav qhia	Tau txais HDCP xwm txheej ntawm HDMI Out.

Example:
Kom tau txais HDCP xwm txheej ntawm HDMI tawm:

• Hais kom ua:
  gbconfig -s hdcp-enable
• Teb:
  n

Lub HDCP ntawm HDMI tawm yog muab tua.

gbconfig -cec-enable

txib	gbconfig -cec-enable {n | y}
Teb	CEC yuav qhib lossis kaw.
Kev piav qhia	Teem CEC rau / tawm. n: Tig CEC. y: Qhib CEC.

Example:
Txhawm rau qhib CEC:

• Hais kom ua:
  gbconfig -cec-enable y
• Teb:
  CEC yuav qhib.

gbconfig -s cec-enable

txib	gbconfig -s cec-enable
Teb	n/y
Kev piav qhia	Tau txais CEC xwm txheej. n: CEC tawm. y: CEC yog. Nco tseg: Thaum CEC raug kaw, cov lus txib "GB tswj - lub zog dab dej" yuav tsis muaj, thiab kev hloov ntawm kev ua haujlwm ib txwm ua thiab kev tos rau VB10 yuav tsis siv tau thiab.

Example:
Kom tau txais CEC xwm txheej:

• Hais kom ua:
  gbconfig -s cec-enable
• Teb:
  y

CEC tau qhib.

gbcontrol – dab dej

txib	gbcontrol –sinkpower {ntawm | tawm}
Teb	CEC hais kom tswj cov zaub rau / tawm yuav raug xa los ntawm HDMI Tawm rau kev cob cog rua zaub.
Kev piav qhia	Txhawm rau xa CEC cov lus txib rau kev tswj cov zaub rau lossis tawm. On: Xa CEC hais kom ua rau kev tswj cov zaub. Tawm: Xa CEC cov lus txib rau kev tswj cov zaub tawm.

Example:
Txhawm rau xa CEC cov lus txib rau kev tswj cov zaub ntawm:

• Hais kom ua:
  gbcontrol -sinkpower rau
• Teb:
  Cov lus txib CEC rau lub hwj chim ntawm CEC-enabled zaub yuav raug xa los ntawm HDMI tawm.

gbconfig -cec-cmd hdmi

txib	gbconfig –cec-cmd hdmi {on | tawm} {CmdStr}
Teb	CEC cov lus txib rau kev tswj cov zaub rau / tawm yuav raug teeb tsa thiab khaws cia rau ntawm

	ntaus ntawv.
Kev piav qhia	Txhawm rau teeb tsa thiab txuag CEC cov lus txib rau kev tswj cov zaub rau lossis tawm ntawm lub cuab yeej. On: Configure CEC hais kom ua rau kev tswj cov zaub rau. Off: Configure CEC hais kom ua rau kev tswj cov zaub tawm. CmdStr: CEC hais kom ua txoj hlua lossis hex hom. Rau example, CEC cov lus txib rau lub hwj chim ntawm cov zaub yuav yog "40 04".

Example:
Txhawm rau teeb tsa thiab txuag CEC cov lus txib "40 04" rau lub zog ntawm cov zaub ntawm lub cuab yeej:

• Hais kom ua:
  gbconfig -cec-cmd hdmi ntawm 4004
• Teb:
  Cov lus txib CEC rau lub hwj chim ntawm CEC-enabled zaub "40 04" yuav raug cawm dim ntawm lub cuab yeej.

gbconfig -s cec-cmd

txib	gbconfig -s cec-cmd
Teb	HDMI ON: xxxx HDMI OFF: xxxx
Kev piav qhia	Tau txais CEC cov lus txib rau kev tswj cov zaub rau thiab tawm. Ÿ on: Configure CEC command for controlling display on. Ÿ Tawm: Teeb tsa CEC cov lus txib rau kev tswj cov zaub tawm. Ÿ CmdStr: CEC hais kom ua txoj hlua lossis hex hom. Rau example, the CEC hais kom ua rau lub zog ntawm cov zaub yuav yog "40 04".

Example:
Kom tau txais CEC cov lus txib rau kev tswj cov zaub rau thiab tawm:

• Hais kom ua:
  gbconfig -s -cec-cmd
• Teb:
  • HDMI rau: 4004
  • HDMI OFF: ff36

Cov lus txib CEC rau lub hwj chim ntawm CEC-enabled zaub: yog "40 04"; cov lus txib kom lub hwj chim tawm ntawm cov zaub: yog "ff 36".

gbcontrol -xa-cmd hdmi

txib	gbcontrol –xa-cmd hdmi {CmdStr}
Teb	CEC cov lus txib {CmdStr} yuav raug xa mus rau cov zaub tam sim rau kev sim.
Kev piav qhia	Xa CEC hais kom ua {CmdStr} rau cov zaub tam sim ntawd. Nco tseg: Cov lus txib no yuav tsis raug cawm ntawm lub cuab yeej.

Example:
Xa CEC cov lus txib "44 04" rau cov zaub:

• Hais kom ua:
  gbcontrol -xa-cmd hdmi 4004
• Teb:
  CEC hais kom ua "40 04" yuav raug xa mus rau cov zaub tam sim ntawd.

gbconfig –mice-enable

txib	gbconfig –mice-enable {n |y}
Teb	Miracast tshaj Infrastructure feature enabled lossis xiam oob qhab
Kev piav qhia	n, neeg xiam. y, ua enabled.

Example:
Txhawm rau teeb tsa Miracast tshaj Infrastructure raws li tau qhib:

• Hais kom ua:
  gbconfig –mice-enable y
• Teb:
  Miracast tshaj qhov Infrastructure feature yuav qhib.

gbconfig -s nas-enable

txib	gbconfig -s nas-enable
Teb	n/y
Kev piav qhia	n, neeg xiam. y, ua enabled.

Example:
Kom tau txais Miracast hla Infrastructure xwm txheej:

• Hais kom ua:
  gbconfig -s nas-enable
• Teb:
  n

Lub Miracast tshaj Infrastructure yog neeg xiam.

gbconfig –display-mode

txib	gbconfig –display-mode {ib | dual}
Teb	Teem Display layout rau ib leeg, cais
Kev piav qhia	Ib leeg thiab Split yog nws pib layouts,

Example:
Txhawm rau teeb tsa cov duab tso rau hauv hom ntawv qhia:

• Hais kom ua:
  gbconfig -display-mode ib leeg
• Teb:
  Cov zaub layout hom tig mus rau ib leeg.

gbconfig -s zaub-hom

txib	gbconfig -s zaub-hom
Teb	ib leeg / dual / phau ntawv
Kev piav qhia	ib leeg, nws pib ib leeg layout dual, nws pib faib layout phau ntawv, rau phau ntawv layout teeb

Example:
Kom tau txais cov xwm txheej pom pom:

• Hais kom ua:
  gbconfig -s zaub-hom
• Teb:
  ib leeg

Cov zaub hom yog ib leeg.

Suab:

gbconfig -mic-mute

txib	gbconfig -mic-mute {n | y}
Teb	Txhua lub microphones yuav raug teeb tsa ua lub suab kaw / tawm.
Kev piav qhia	Teem txhua lub microphones (xws li VB10's thiab expansible microphones) mute on/off. n: lus. y :tug.

Example:
Txhawm rau teeb tsa txhua lub microphone kaw:

• Hais kom ua:
  gbconfig -mic-mute n
• Teb:
  Lub microphones yuav raug teeb tsa ua suab nrov.

gbconfig -s mic-mute

txib	gbconfig -s mic-mute
Teb	n/y
Kev piav qhia	Kom tau txais txhua lub microphones (xws li VB10's thiab expansible microphones) mute on/off status. n: lus. y :tug.

Example:
Kom tau txais tag nrho cov microphone mute rau / tawm raws li txoj cai:

• Hais kom ua:
  gbconfig -s mic-mute
• Teb:
  n

Lub microphones tau kaw lawm.

gbconfig - pib ntim

txib	gbconfig – autovolume {inc | dec }
Teb	Qhov ntim nce yuav nce lossis txo los ntawm 2 ib kauj ruam.
Kev piav qhia	Txhawm rau nce lossis txo qhov ntim. inc: Txhawm rau nce qhov nce ntawm cov zis ntim los ntawm 2 ib kauj ruam. dec: Txhawm rau txo qhov nce ntawm cov zis ntim los ntawm 2 ib kauj ruam.

Example:
Txhawm rau nce ntim:

• Hais kom ua:
  gbconfig - autovolume Inc
• Teb:
  Qhov ntim yuav tau nce los ntawm 2 rau ib kauj ruam.

gbconfig - ntim

txib	gbconfig – ntim {0,12,24,36,50,62,74,88,100}
Teb	Teem lub ntim qhov tseem ceeb.
Kev piav qhia	Volume tsuas yog configured rau cov nqi teev

Example:
Txhawm rau teeb tsa lub ntim:

• Hais kom ua:
  gbconfig – ntim 50
• Teb:
  Qhov ntim yuav raug teem rau 50.

gbconfig -s ntim

txib	gbconfig -s ntim
Teb	0-100 : kuv
Kev piav qhia	Tau qhov ntim qhov tseem ceeb.

Example:
Kom tau qhov ntim:

• Hais kom ua:
  gbconfig -s ntim
• Teb:
  50

Qhov ntim yog 50.

gbconfig - hais lus-mute

txib	gbconfig –hais lus-mute {n | y}
Teb	Teem tus hais lus mute/unmute.
Kev piav qhia	n, lus y, lus

Example:
Txhawm rau teeb tsa tus neeg hais lus mute:

• Hais kom ua:
  gbconfig –hais lus-mute y
• Teb:
  Tus neeg hais lus yuav tsis mloog.

gbconfig -s hais lus-mute

txib	gbconfig -s hais lus-mute
Teb	n/y
Kev piav qhia	Tau txais tus neeg hais lus xwm txheej.

Example:
Txhawm rau kom tau txais qhov tsis zoo ntawm tus neeg hais lus:

• Hais kom ua:
  gbconfig -s hais lus-mute
• Teb:
  n

Tus neeg hais lus tsis muaj suab.

gbconfig –vb10-mic-disable

txib	gbconfig –vb10-mic-disable {n |y}
Teb	Teem lub mic sab hauv ntawm vb10 enabled/disabled.
Kev piav qhia	n, ua enabled y, neeg xiam

Example:
Txhawm rau teeb tsa lub mic disabled:

• Hais kom ua:
  gbconfig –vb10-mic-disable y
• Teb:
  Lub mic ntawm vb10 yuav raug kaw.

gbconfig -s vb10-mic-disable

txib	gbconfig -s vb10-mic-disable
Teb	n/y
Kev piav qhia	Tau txais qhov xwm txheej mic.

Example:
Kom tau txais cov xwm txheej mic:

• Hais kom ua:
  gbconfig -s vb10-mic-disable
• Teb:
  n

Lub mic tau qhib.

Qhov System:

gbcontrol –device-info

txib	gbcontrol –device-info
Teb	Tau txais lub firmware version
Kev piav qhia	Lub firmware version rau VB10

Example:
Kom tau txais lub firmware version:

• Hais kom ua:
  gbcontrol –device-info
• Teb:
  v 1.3.10

gbconfig -hibernate

txib	gbconfig –hibernate {n |y}
Teb	Teem lub cuab yeej pw tsaug zog.
Kev piav qhia	n ,ua y ,nug

Example:
Txhawm rau teeb tsa lub cuab yeej pw tsaug zog:

• Hais kom ua:
  gbconfig -hibernate y
• Teb:
  Cov cuab yeej yuav pw tsaug zog.

gbconfig -s hibernate

txib	gbconfig -s hibernate
Teb	n/y
Kev piav qhia	Tau txais cov xwm txheej pw tsaug zog.

Example:
Kom tau txais cov xwm txheej pw tsaug zog ntawm lub cuab yeej:

• Hais kom ua:
  gbconfig -s hibernate
• Teb:
  n

Cov cuab yeej ua haujlwm.

gbconfig -show-guide

txib	gbconfig –show-guide {n |y}
Teb	Qhia qhov screen qhia phau ntawv.
Kev piav qhia	n ,kab y ,siv

Example:
Qhia qhov screen qhia:

• Hais kom ua:
  gbconfig –show-guide y
• Teb:
  Daim ntawv qhia zaub mov yuav pom.

gbconfig -s qhia-guide

txib	gbconfig -s qhia-guide
Teb	n/y
Kev piav qhia	Tau txais daim ntawv qhia kev tshuaj ntsuam. Nco ntsoov tias tsuas yog cov xwm txheej ntawm phau ntawv qhia kev tshuaj ntsuam tau muab rov qab.

Example:
Kom tau txais cov lus qhia kev tshuaj ntsuam ntawm lub cuab yeej:

• Hais kom ua:
  gbconfig -s hibernate
• Teb:
  n

Lub vijtsam qhia tsis pom.

Cov ntaub ntawv / Cov ntaub ntawv

infobit iCam VB80 Platform API Commands [ua pdf] Cov lus qhia VB80, iCam VB80 Platform API Commands, iCam VB80, Platform API Commands, Platform Commands, API Commands, iCAM VB80 Commands, Commands

Cov ntaub ntawv

• Cov neeg siv phau ntawv