MDM300
Sampling Sistimi
Bukana ea Mosebelisi
97232 Khatiso ea 1.5
Mphalane 2024
Lisebelisoa MDM300 Sampling Sistimi
Ka kopo, tlatsa (li) foromo e ka tlase bakeng sa sesebelisoa ka seng se rekiloeng.
Sebelisa lintlha tsena ha u ikopanya le Michell Instruments molemong oa ts'ebeletso.
| Seletsa | |
| Khoutu | |
| Nomoro ea letoto | |
| Letsatsi la Invoice | |
| Sebaka sa Seletsa | |
| Tag Che | |
| Seletsa | |
| Khoutu | |
| Nomoro ea letoto | |
| Letsatsi la Invoice | |
| Sebaka sa Seletsa | |
| Tag Che | |
| Seletsa | |
| Khoutu | |
| Nomoro ea letoto | |
| Letsatsi la Invoice | |
| Sebaka sa Seletsa | |
| Tag Che |
Ho fumana lintlha tsa ho ikopanya le Michell Instruments ka kopo, etela ho www.ProcessSensing.com
MDM300 Sampling Sistimi
© 2024 Michell Instruments
Tokomane ena ke thepa ea Michell Instruments Ltd. 'me e kanna ea se kopitsoe kapa ea etsoa hape, ea phatlalatsoa ka tsela efe kapa efe ho batho ba bang, kapa ho bolokoa ho Sistimi efe kapa efe ea Ts'ebetso ea Lintlha ntle le tumello e ngotsoeng e hlakileng ea Michell Instruments Ltd.
Polokeho
Moetsi o ralile thepa ena hore e bolokehe ha e sebelisoa ho sebelisoa mekhoa e hlalositsoeng bukeng ena. Mosebelisi ha a tlameha ho sebelisa sesebelisoa sena molemong o mong ntle le o boletsoeng. U se ke ua beha thepa tlas'a maemo a ka ntle ho meeli ea ts'ebetso e boletsoeng. Bukana ena e na le litaelo tsa ts'ebetso le polokeho, tse tlamehang ho lateloa ho netefatsa ts'ebetso e bolokehileng le ho boloka lisebelisoa li le maemong a sireletsehileng. Litaelo tsa polokeho e ka ba litemoso kapa litemoso tse fanoeng ho sireletsa mosebelisi le lisebelisoa ho tsoa kotsi kapa tšenyo. Sebelisa basebetsi ba nang le litsebo ba sebelisa mekhoa e metle ea boenjiniere bakeng sa mekhoa eohle e bukeng ena.
Tšireletseho ea Motlakase
Sesebelisoa se etselitsoe hore se bolokehe ka ho feletseng ha se sebelisoa le likhetho le lisebelisoa tse fanoang ke moetsi hore li sebelisoe le sesebelisoa.
Tšireletseho ea Khatello
U SE KE UA lumella likhatello tse kholo ho feta khatello e sireletsehileng ea ho sebetsa ho sebelisoa sesebelisoa.
Khatello ea ts'ebetso e sireletsehileng e boletsoeng e tla ba ka tsela e latelang (sheba Sehlomathiso A - Litlhaloso tsa Tekheniki):
Khatello e tlase: 20 barg (290 psig)
Khatello e mahareng: 110 barg (1595 psig)
Khatello e phahameng: 340 barg (4931 psig)
TLHOKOMELO
Flowmeter ha ea lokela ho hatelloa.
Kamehla eketsa khatello ea sample ho kgatello ya sepakapaka pele e kena ho mithara ya phallo.
Lintho Tse Chefo
Tšebeliso ea lisebelisoa tse kotsi ha ho hahoa sesebelisoa sena e fokotsehile. Nakong ea ts'ebetso e tloaelehileng ha ho khonehe hore mosebelisi a kopane le ntho leha e le efe e kotsi e ka 'nang ea sebelisoa ha ho etsoa sesebelisoa. Leha ho le joalo, tlhokomelo e lokela ho sebelisoa nakong ea tlhokomelo le ho lahla likarolo tse itseng.
Tokiso le Tlhokomelo
Sesebelisoa se tlameha ho hlokomeloa ke moetsi kapa moemeli oa litšebeletso tse ngolisitsoeng ka molao. Sheba ho www.ProcessSensing.com bakeng sa lintlha tse mabapi le litaba tsa liofisi tsa lefats'e tsa Michell Instruments
Tekanyetso
Nako e khothaletsoang ea ho lekanya MDM300 Hygrometer ke likhoeli tse 12. Sesebelisoa se lokela ho khutlisetsoa ho moetsi, Michell Instruments, kapa e mong oa li-agent tsa bona tse ngolisitsoeng ka molao bakeng sa ho nchafatsoa.
Tšireletseho Tumellanong
Sehlahisoa sena se kopana le litlhoko tsa bohlokoa tsa tšireletso tsa litaelo tse amehang tsa EU. Lintlha tse ling tsa litekanyetso tse sebelisoang li ka fumanoa ho litlhaloso tsa sehlahisoa.
Likgutsufatso
Likgutsufatso tse latelang li sebelisoa bukeng ena:
AC alternating barg pressure unit (=100 kP kapa 0.987 atm) gauge
ºC likhato tsa Celsius
ºF likhato tsa Fahrenheit
Nl/min lilithara ka motsotso
lik'hilograma
lb pound(s) mm limilimithara " inch(es) psig pounds per square inch gauge scfh standard cubic feet ka hora
Litemoso
Tlhokomeliso e akaretsang e latelang e thathamisitsoeng ka tlase e sebetsa sesebelisoa sena. E phetoa mongolong libakeng tse loketseng.
Moo letšoao lena la tlhokomeliso ea kotsi le hlahang likarolong tse latelang, le sebelisetsoa ho bontša libaka tseo ho hlokahalang hore ho etsoe mesebetsi e ka bang kotsi.
LIEKETSENG
The MDM300 panel-mount sampling tsamaiso e fana ka sephutheloana se feletseng bakeng sa conditioning ea e leample, pele ho tekanyo ka MDM300 kapa MDM300 IS
E fumaneha ka har'a sebaka sa boikhethelo sa sefofane se lumellang ho tsamaisa lintho tsohle tse hlokahalang ho etsa litekanyo. Kaho ea anti-static ea nyeoe e etsa hore e loketse ho sebelisoa libakeng tse kotsi.
KEKETSO
2.1 Polokeho
Ho bohlokoa hore ho kengoa lisebelisoa tsa motlakase le khase sesebelisoa sena ho etsoe ke basebetsi ba nang le litsebo.
2.2 Ho manolla Seletsa
Lebokose la thepa le tla ba le tse latelang:
- MDM300 Panel-Mount Sampling Sistimi
- Boemo ba sefofane (boikhethelo)
- 2.5mm Allen senotlolo
- 2 x 2.5mm liboutu tsa hex
- 2 x 1/8” NPT ho isa ho 1/8” liadapter tsa Swagelok ®
1. Bula lebokose. Haeba nyeoe ea sefofane e ne e laetsoe, sampling tsamaiso e tla kenngoa ka hare ho eona.
2. Tlosa sampling panel (kapa mokotla oa sefofane, haeba o laetsoe) ho tsoa lebokoseng, hammoho le lisebelisoa.
3. Boloka lisebelisoa tsohle tsa ho paka haeba ho hlokahala ho khutlisa sesebelisoa.
2.3 Litlhoko tsa Tikoloho
Sheba bukana ea mosebedisi bakeng sa tlhahisoleseding mabapi le maemo a amohelehang a tikoloho moo MDM300 e sebetsang teng.
2.4 Ho lokisetsa Sampling Sistimi ea Ts'ebetso
Ho lokisa sistimi bakeng sa ts'ebetso, ho hlokahala ho kenya MDM300 ho sampSisteme ea ho qetela ka tsela e latelang:
- Koahela theipi ea PTFE (ha e fanoe), ho pota lipheletsong tsa 1/8” NPT ho isa ho 1/8” Swagelok tube fittings ebe u kenya ka har'a li-adapter tsa orifice tse kentsoeng ho MDM300. Netefatsa hore li-adapter tsa orifice port ho MDM300 ka bobeli ke mefuta e meholo ea bore (sheba bukana ea mosebelisi e loketseng bakeng sa lintlha tse ling).
- Fumana MDM300 sebakeng se bontšitsoeng ka tlase.
- Hokela li-tubes tse koetsoeng sebakeng se kenang le se tsoang ho MDM300. Netefatsa hore linate tsa 1/8” tsa Swagelok ® li tiile ka monoana.
- Sireletsa sesebelisoa lipateroneng tse hokahaneng u sebelisa liboutu tsa hex tsa 2.5mm le senotlolo sa allen.
- Sebelisa sepane / sepane ho phethela ho tiisa 1/8 ″ Swage100, linate tse kenang / sephutheloana ho netefatsa hore ha ho na ho lutla. Mmele oa 1/8 ″ NPT ho 1/8 ″ adaptara ea Swageloklt e lokela ho ts'oaroa ka mokhoa o sireletsehileng ka wrench / spanner e 'ngoe ha linate li tiisitsoe ho thibela motsamao ofe kapa ofe.
2.5 Litaolo, Lipontšo le Lihokelo
| 1 | Setsi sa Metering Valve | E sebelisetsoang ho laola sample phallo bakeng sa litekanyo tsa khatello ea sistimi E lokela ho buloa ka botlalo bakeng sa litekanyo tsa khatello ea sistimi |
| 2 | Khatello Gauge | Lekhalo le bontšang sample khatello ho pholletsa le sele ea kutlo |
| 3 | Sample Vent | E kentsoe sebui se khutsitseng kapa Swagelok® tube e loketseng ho etsa hore mohala oa moea o hokahane |
| 4 | Phallo Meter | Bakeng sa pontšo ea phallo |
| 5 | Sekhahla sa Metering Valve | E sebelisetsoang ho laola sample phallo bakeng sa litekanyo tsa khatello ea sepakapaka E lokela ho buleha ka botlalo bakeng sa litekanyo tsa khatello ea sistimi |
| 6 | Bypass Port | Ntho e tsoang tseleng e ka thōko E ka hokeloa ka boikhethelo moleng oa moea nakong ea ts'ebetso |
| 7 | Sample Inlet | Bakeng sa ho hokahanya le sample gas line Sheba Karolo ea 3.1 bakeng sa boitsebiso bo eketsehileng mabapi le ho etsa likhokahano tsamaisong |
| 8 | Bypass Metering Valve | E sebelisetsoa ho laola sekhahla sa phallo ka tsela ea bypass |
Tafole ea 1 Litaolo, Lipontšo le Lihokelo
TS'EBETSO
3.1 Sample Khokelo ea Khase
Khase e hlahisoa tsamaisong ka ho hokahanya sample khoele ea ho tloha boema-kepeng ba GAS IN, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 8.
Haeba ho hlokahala, hokela mohala oa moea boema-kepe ba BYPASS, le ho phallo ea phallo (haeba e kentsoe).
3.2 Mokhoa oa Ts'ebetso
- Hokela seletsa ho sample khase joalo ka ha ho hlalositsoe Karolong ea 3.1.
- Bula valve ea ho itšehla thajana ka botlalo.
- Sheba karolo ea Tataiso ea Ts'ebetso bukeng e amehang ea MDM300 bakeng sa litaelo tse tobileng mabapi le ts'ebetso.
- Ho itšetlehile ka sample khatello ho ka 'na ha hlokahala ho sebelisa taolo ea phallo ea bypass ho hlola sample phallo laola mathata.
3.3 Sampling Litlhahiso
Tekanyo ea mongobo ke taba e rarahaneng, empa ha ho hlokahale hore e be thata.
Karolo ena e ikemiselitse ho hlalosa liphoso tse tloaelehileng tse etsoang maemong a tekanyo, lisosa tsa bothata, le mokhoa oa ho li qoba. Liphoso le mekhoa e mebe li ka etsa hore tekanyo e fapane le tebello; ka hona e ntle sampmokhoa oa ho ngola o bohlokoa bakeng sa liphetho tse nepahetseng le tse tšepahalang.
Phetoho le Sampling Lisebelisoa
Lisebelisoa tsohle li khona ho kenella mouoane oa metsi, kaha molek'hule ea metsi e nyane haholo ha e bapisoa le sebopeho sa lintho tse tiileng, leha e bapisoa le sebopeho sa kristale sa tšepe. Kerafo e ka ho le letona e bontša phoka ka hare ho li-tubing tsa lisebelisoa tse fapaneng ha li hloekisoa ka khase e omeletseng haholo, moo bokantle ba li-tubing bo leng tikolohong ea tikoloho.
Lisebelisoa tse ngata li na le mongobo e le karolo ea sebopeho sa tsona, haholo-holo lintho tsa tlhaho (tsa tlhaho kapa tsa maiketsetso), letsoai (kapa eng kapa eng e nang le tsona) le eng kapa eng e nang le li-pores tse nyane. Ke habohlokoa ho netefatsa hore lisebelisoa tse sebelisoang li loketse kopo.
Haeba khatello e sa fellang ea mouoane oa metsi e hlahisoang ka ntle ho mohala oa moea o hatelitsoeng e le holimo ho feta ka hare, mouoane oa sepakapaka o tla phunyeletsa sebakeng se nang le masoba ho etsa hore metsi a fallele moleng o hatelitsoeng oa moea. Phello ena e bitsoa transpiration.
Adsorption le Desorption
Adsorption ke ho khomarela ha liathomo, li-ion, kapa limolek'hule ho tloha khase, mokelikeli, kapa ho qhibiliha ho tiileng holim'a thepa, ho theha filimi. Sekhahla sa adsorption se eketseha ka likhatello tse phahameng le mocheso o tlase.
Desorption ke ho tsoa hoa ntho kapa ho tsoa bokaholimo ba ntho. Maemong a kamehla a tikoloho, ntho ea adsorbed e tla lula e le holim'a metsi hoo e ka bang ka nako e sa lekanyetsoang. Leha ho le joalo, ha mocheso o ntse o phahama, ho joalo le ka monyetla oa hore desorption e hlahe.
Ka mantsoe a sebetsang, ha mocheso oa tikoloho o ntse o fetoha, limolek'hule tsa metsi lia adsorbed le ho tlosoa libakeng tse ka hare tsa s.ample tubing, e bakang liphetoho tse nyane sebakeng se lekantsoeng sa phoka.
Sample Tubing Length
Likarolo tsa sampLe ntlha e lokela ho lula e le haufi le ntlha ea bohlokoa ea tekanyo ka hohle kamoo ho ka khonehang, e le ho fumana tekanyo e emelang e le kannete. Bolelele ba sample mola ho kutlo kapa seletsa e lokela ho ba e khutšoanyane kamoo ho ka khonehang. Lintlha tsa khokahano le li-valve li tšoasa mongobo, kahoo ho sebelisa s e bonolo ka ho fetisisaamptlhophiso ea ling e khoneha e tla fokotsa nako eo e e nkang bakeng sa sample sistimi ea ho omella ha e hloekisoa ka khase e omileng. Ka nako e telele ea li-tubing, metsi a tla fallela moleng ofe kapa ofe, 'me liphello tsa adsorption le desorption li tla bonahala haholoanyane. Ho hlakile ho graph e bontšitsoeng ka holimo hore lisebelisoa tse molemo ka ho fetisisa tsa ho hanela phepelo ke tšepe e sa hloekang le PTFE.
Mongobo o Tletseng
Meqolo e shoeleng (libaka tse seng tseleng e tobileng ea phallo) ho sample mela, tšoara holim'a limolek'hule tsa metsi tse lokolloang butle-butle ka khase e fetang; sena se fella ka ho eketseha ha nako ea ho hloekisa le ho arabela, le ho ba metsi ho feta ho baloa ho neng ho lebelletsoe. Lisebelisoa tsa Hygroscopic tse ka har'a lifilthara, li-valve (mohlala, rabara e tsoang ho lilaoli tsa khatello) kapa likarolo tse ling tsa sistimi le tsona li ka tšoasa mongobo.
Sample Conditioning
Sample conditioning hangata e a hlokahala ho qoba ho pepesehela lisebelisoa tsa ho metha tse hlokolosi ho maro le litšila tse ling tse ka bakang tšenyo kapa tsa ama ho nepahala ha nako e ntse e ea, ho latela tekhenoloji ea tekanyo.
Li-filters tsa Particulate li sebelisoa ho tlosa litšila, mafome, sekala le lintho tse ling tse tiileng tse ka bang joalo kaample molapo. Bakeng sa ts'ireletso khahlanong le maro, sefa se kopanyang se lokela ho sebelisoa. Sesefa sa membrane ke mokhoa o bitsang chelete e ngata empa o sebetsa haholo ho feta sefa se kopanyang. E fana ka tšireletso ho marotholi a metsi, 'me e ka emisa ho phalla ho ea ho analyzer ka ho feletseng ha ho kopana le slug e kholo ea metsi.
Condensation le Leaks
Ho boloka mocheso oa sample tsamaiso tubing ka holim'a ntlha ea phoka ea sampe bohlokoa ho thibela condensation. condensation efe kapa efe e etsa hore sampling process ha e fetola mouoane oa metsi oa khase e lekantsoeng. Mokelikeli o koalehileng o ka fetola mongobo sebakeng se seng ka ho rothela kapa ho mathela libakeng tse ling moo o ka fetohang mouoane hape.
Botšepehi ba likhokahano tsohle le bona ke taba ea bohlokoa, haholo ha sampphoka e tlase e supa khatellong e phahameng. Haeba ho dutla ho honyane ho hlaha mothapong wa kgatello e phahameng, kgase e tla dutla empa maqhubu moo ho dutlang teng le phapang e mpe ya kgatello ya mouwane le yona e tla dumella mouwane wa metsi ho silafatsa phallo.
Litefiso tsa Phallo
Sekhahla sa phallo ea theory ha se na phello e tobileng holim'a mongobo o lekantsoeng, empa ka ts'ebetso e ka ba le liphello tse sa lebelloang ho lebelo la karabo le ho nepahala. Sekhahla se nepahetseng sa phallo se fapana ho latela theknoloji ea tekanyo.
MDM300 IS sekhahla sa phallo 0.2 ho 0.5 Nl/min (0.5 ho 1 scfh)
Sekhahla sa phallo ea MDM300 0.2 ho 1.2 Nl/min (0.5 ho 1.2 scfh)
TLHOKOMELO
Flowmeter ha ea lokela ho hatelloa.
Kamehla eketsa khatello ea sample ho kgatello ya sepakapaka pele e kena ho mithara ya phallo.
Sekhahla se sa lekaneng sa phallo se ka:
- Eketsa litlamorao tsa adsorption le desorption ho khase e fetang samptsamaiso ea lintho.
- Lumella lipokotho tsa khase e metsi hore li lule li sa khathatsehe sebakeng se rarahanengampling tsamaiso, e leng tla ka nako eo butle-butle lokolloa ka sample phalla.
- Eketsa monyetla oa tšoaetso ho tsoa mokokotlong: moea o phelang o mongobo hofeta sample ka phalla ho tloha mokhathala ho khutlela tsamaisong. Ho qeta nako e telele (ka linako tse ling ho bitsoa pigtail) ho ka boela ha thusa ho fokotsa bothata bona.
Sekhahla sa phallo e phahameng haholo se ka: - Hlahisa khatello ea morao, e bakang linako tse liehang tsa ho arabela le liphello tse sa lebelloang lisebelisoa tse kang lijenereithara tsa mongobo.
- E fella ka ho fokotseha ha bokhoni ba ho futhumatsa ba tile ea sensor nakong ea ho qala. Sena se bonahala haholo ka likhase tse nang le mocheso o phahameng oa mocheso o kang hydrogen le helium.
TLHOKOMELO
4.1 Litaelo tsa Tlhokomelo e Akaretsang
Tlhokomelo e tloaelehileng ea sistimi e lekanyelitsoe feela ho sefa sebaka le ho nchafatsa sensor ea MDM300 kapa MDM300 IS khafetsa. Bakeng sa lintlha tse qaqileng mabapi le ho fetola likarolo tsa filthara, ka kopo bona Karolo ea 4.2.
Likopong tse ngata, tlhahlobo ea selemo le selemo e netefatsa hore ho nepahala ho boletsoeng ha MDM300 Advanced Dew-Point Hygrometer hoa bolokoa. Sekema sa sensor ea phapanyetsano ke mokhoa o sebetsang ka ho fetesisa oa ho fana ka phetisetso e nepahetseng ea selemo ka nako e fokolang.
Ka kopo ikopanye le Michell Instruments bakeng sa lintlha tse ling.
Pele ho ntlafatsoa ho hlokahala, sensor ea phapanyetsano e ka laeloa ho Michell Instruments kapa morekisi ofe kapa ofe ea lumelletsoeng. Hang ha setifikeiti sa sensor le calibration se se se amohetsoe se ka kenngoa 'me sensor ea mantlha e khutlisetsoa ho Michell Instruments.
Bakeng sa lintlha tse ling tsa ho nchafatsa MDM300 ka kopo bona bukana ea mosebelisi e nepahetseng.
4.2 Phetoho ea Sefa
Khafetsa ea phetisetso ea element element e itšetlehile haholo ka bongata ba litšila tse teng ho s.ample khase. Haeba khase e tletse haholo ka li-particulate kapa li-liquid, ho kgothaletswa hore o hlahlobe elemente ya sefa kgafetsa qalong, mme o eketse nako pakeng tsa ditlhahlobo ha sefefo se fumanwa se le maemong a matle.
Hoa hlokahala hore li-filters tsohle li nchafatsoe pele li tlala. Haeba karolo ea filthara e tlala litšila ho na le monyetla oa hore ts'ebetso ea filthara e fokotsehe, 'me ho ka hlaha tšilafalo ea sensor ea MDM300.
Pele o leka ho nkela filthara sebaka kamehla o hakolla sesebelisoa sa Sampling Tsamaiso e tsoang ho sample khase le ho etsa bonnete ba hore tsamaiso ea khatello ea maikutlo.
Ho nkela karolo ea "particulate" kapa "coalescing filter" sebaka, tsoela pele ka tsela e latelang:
- Hakolla karolo e nang le sebopeho sa U ea li-tubing tsa Swagelok® ho tsoa ho drainage ea sefe.
- Hlakola 'me u tlose sekotlolo se sefang ebe u tlosa ntho ea ho sefa. HLOKOMELA: sekotlolo sa filthara se tiisitsoe ka O-ring.
- Lahla ntho ea khale ea sefe e sebelisitsoeng 'me u e nkele sebaka ka ntho e ncha ea filthara.
MDM300-SAM-PAR - particulate element MDM300-SAM-COA - coalescing element - Kenya sebaka sa sekotlolo sa filthara, ho etsa bonnete ba hore O-ring e lutse hantle 'me e kopanya tube hape koung ea drain.
HLOKOMELA: E tiisa ka bobeli ka mokhoa o sireletsehileng.
Ho nka sebaka sa cartridge ea glycol absorption, tsoela pele ka tsela e latelang:
- Tlosa nate ea bonete ea bonngoe ka sepane se bulehileng. 'Mele oa tšehetso ho fokotsa khatello ea liphaephe kapa li-tubing.
- Unscrew union nut 'me u tlose kopano.
HLOKOMELA: Union nut, bonnet, spring le retaining ring li lula hammoho e le kopano. - Tlanya sefahlapi ka bonolo ka lehlakoreng hore o itokolle sebakeng sa litulo se tepeletseng.
- Kenya khatriji e ncha e monyang glycol. Tlanya hanyenyane ho khutlela ka har'a tapered bore. Khoutu ea odara: MDM300-SAM-PNL-GLY
- Lekola gasket le libaka tsa ho nyalana holim'a bonete le 'mele. Hloekisa ha ho hlokahala. Ho khothalletsoa ho fetola gasket.
Sehlomathiso A Litlhaloso tsa Tekheniki
| Sebaka se koaletsoeng | |
| Litekanyo | 300 x 400 x 150mm (11.81 x 15.75 x 5.91″) (wxhxd) |
| Lisebelisoa | ABS (anti-static) |
| Tšireletso ea Ingress | IP67 / NEMA4 |
| Sampling Sistimi | |
| Khatello Range | Khatello e tlase: 20 barg (290 psig) Khatello e bohareng: 110 barg (1595 psig) Khatello e phahameng: 340 barg (4931 psig) |
| Sekhahla sa Phallo | MDM300 0.2…1.2 NI/min (0.4…2.54 scfh) MDM300 KE 0.2…0.5 NI/min (0.4…1.1 scfh) |
| Lisebelisoa tse kolobisitsoeng ka khase | 316 tšepe e sa hloekang |
| Lihokelo tsa Khase | Ho ipapisitsoe le mofuta: Legris e lokolloa kapele - e amohela 6mm 0/D PTFE (LOW PRESSURE VERSION FEELA) 1/8″ Swagelok® 6mm Swagelok® |
| Likaroloana | |
| Li-valve | Sekhahla sa ho itšehla thajana, 2 xsampli-valve tsa taolo ea phallo, li-valve tsa taolo ea ho phalla ha Bypass |
| Tlhophiso | Likhetho tsa: Particulate Coalescing |
| Khatello Gauge | Ho latela mohlala: Khatello e tlase: 0…25 barg (0…362 psig) Khatello e mahareng: 0…137 barg (0…1987 psig) Khatello e phahameng: 0…413 barg (0…5990 psig) |
| Seqhubu | Khatello ea sepakapaka feela - U SE KE UA hatelleha ho tsoa Likhetho tsa: Silencer 1/8 ″ Swagelok® 6mm Swagelok® |
Sehlomathiso sa B Boleng, Recycling & Warranty Information
Michell Instruments e ikemiselitse ho latela melao le litaelo tsohle tse amehang. Lintlha tse felletseng li ka fumanoa ho rona websebaka ho: www.ProcessSensing.com/en-us/compliance/
Leqephe lena le na le lintlha tse mabapi le litaelo tse latelang:
- Khahlanong le Nolofatso ea Leano la ho Qoba Lekhetho
- Tataiso ea ATEX
- Lisebelisoa tsa ho lekanya
- Liminerale tsa Khohlano
- Phatlalatso ea FCC
- Boleng ba Tlhahiso
- Polelo ea Bokhoba ba Kajeno
- Khatello Equipment Directive
- FINYELLANG
- RoHS
- WEEE
- Leano la ho Recycle
- Warranty le Returns
Lintlha tsena li fumaneha hape ka sebopeho sa PDF.
Sehlomathiso sa C Return Document & Decontamination Declaration
Setifikeiti sa ho hloekisa
TLHOKOMELISO EA BOHLOKOA: Ka kopo tlatsa foromo ena pele ho sesebelisoa sena, kapa likarolo life kapa life, u siea sebaka sa hau sa marang-rang ebe u khutlisetsoa ho rona, kapa, moo ho hlokahalang, pele ho mosebetsi ofe kapa ofe o etsoang ke moenjiniere oa Michell sebakeng sa hau sa marang-rang.
| Seletsa | Nomoro ea letoto | ||||||
| Tokiso ea Tiisetso? | EE | NO | PO # ea mantlha | ||||
| Lebitso la K'hamphani | Lebitso la Lebitso | ||||||
| Aterese | |||||||
| Mohala # | Aterese ea imeile | ||||||
| Lebaka la ho Khutlela / Tlhaloso ea Phoso: | |||||||
| Na sesebediswa see se kile sa pepesetswa (ka hare kapa kantle ho tse ding tsa tse latelang? Ka kopo, etsa selikalikoe (YES/CHE) ha ho hlokahala, 'me u fane ka lintlha tse ka tlase. | |||||||
| Likotsi tsa bophelo | EE | NO | |||||
| Lisebelisoa tsa likokoana-hloko | EE | NO | |||||
| Lik'hemik'hale tse kotsi | EE | NO | |||||
| Lintho tse ntšang mahlaseli a kotsi | EE | NO | |||||
| Likotsi tse ling | EE | NO | |||||
| Ka kopo fana ka lintlha tsa thepa efe kapa efe e kotsi e sebelisoang le sesebelisoa sena joalo ka ha ho boletsoe ka holimo (sebelisa leqephe la ho tsoelapele ha ho hlokahala) | |||||||
| Mokhoa oa hau oa ho etsa deano/decontamination | |||||||
| Na thepa e hloekisitsoe le ho silafatsoa? | KE YES | KE HLOKAHALA | |||||
| Michell Instruments e ke ke ea amohela lisebelisoa tse 'nileng tsa pepesetsoa chefo, radio-activity kapa lisebelisoa tse kotsi. Bakeng sa lits'ebetso tse ngata tse kenyelletsang lihlapolli, acidic, ea motheo, e ka tukang kapa likhase tse chefo, ho hloekisa habonolo ka khase e omileng (phoka ea <-30 ° C) ho feta lihora tse 24 e lokela ho lekana ho hloekisa yuniti pele e khutla. Mosebetsi o ke ke oa etsoa yuniti efe kapa efe e se nang phatlalatso e felletseng ea decontamination. | |||||||
| Phatlalatso ea ho tlosa litšila | |||||||
| Ke phatlalatsa hore lintlha tse ka holimo ke 'nete 'me li feletse ho latela tsebo ea ka, 'me ho bolokehile hore basebetsi ba Michell ba ka sebeletsa kapa ba lokisa sesebelisoa se khutlisitsoeng. | |||||||
| Lebitso (Printa) | Boemo | ||||||
| Tshaeno | Letsatsi | ||||||
Litokomane / Lisebelisoa
 |
MICHELL Lisebelisoa MDM300 Sampling Sistimi [pdf] Bukana ea Mosebelisi MDM300, MDM300 SampSisteme ea ling, SampSisteme ea ling, Sisteme |
