ELSEMA MC-Molaoli oa Heke e le Mong a le Mong Habeli le a le Mong

Litlhaloso

• E loketse liheke tsa swing le tse thellang
• E ts'ehetsa ts'ebetso ea motor e habeli kapa e le 'ngoe
• Sistimi ea Ts'ebetso: Eclipse Operating System (EOS)
• Motšehare le bosiu sensor (DNS)
• Ts'ebetso ea likoloi: 24 kapa 12 Volt DC
• Likarolo tsa ho qala ha enjene ha bonolo le ho emisa ha bonolo
• Ho lokisa lebelo le matla
• LCD e kholo ea 4-line bakeng sa pontšo ea boemo le litaelo tsa ho seta
• 1-Touch control bakeng sa ho seta habonolo
• Ho etsa profil ka otho o sebelisa theknoloji e bohlale
• Lisebelisoa tse fapaneng tse fumanehang: konopo ea tobetsa, bula feela, koala feela, emisa, motho ea tsamaeang ka maoto le Photoelectric Beam.

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya le ho seta

1. Bala le ho utloisisa litaelo tsohle ka hloko pele u kenya.
2. Ho kenya le ho etsa liteko ho lokela ho etsoa ke basebetsi ba koetlisitsoeng ba botekgeniki.
3. Etsa bonnete ba hore litemoso tsohle tsa polokeho lia lateloa ho thibela kotsi kapa tšenyo ea thepa.
4. Boloka litaelo tsa ho seta bakeng sa tšebeliso ea nako e tlang.

Ho sebetsa Molaoli

1. Sebelisa taolo ea 1-Touch ho seta le ho sebetsa habonolo.
2. Lekola skrine e kholo ea LCD ea mela e 4 bakeng sa ts'ebetso ea makoloi le lintlafatso tsa maemo.
3. Fetola lebelo, matla, le litlhophiso tse ling ho latela litlhoko tsa ts'ebetso ea heke.
4. Sebelisa lisebelisoa tse fapaneng tse fumanehang bakeng sa mesebetsi e fapaneng ea liheke.

Litlhahiso tsa Tšireletseho

1. Kenya lisebelisoa tsa ts'ireletso tse kang Photo Electric beam le sensor ea moeli oa polokeho bakeng sa li-othomathiki tse bulang.
2. Netefatsa hore ts'ebetso e nepahetseng ea li-switch switches kapa litopo tsa mochini bakeng sa polokeho e eketsehileng.

Lipotso Tse Botsoang Khafetsa (FAQ):

P: Ke lokela ho etsa eng ha ke kopana le mathata nakong ea ho seta?
A: Haeba u tobana le mathata leha e le afe nakong ea ho seta kapa ts'ebetsong, sheba litaelo tsa ho seta tse fanoeng. Haeba mathata a ntse a tsoela pele, ikopanye le basebetsi ba koetlisitsoeng ba litsebi bakeng sa thuso.

Likaroloana

• E loketse liheke tsa swing le tse thellang
• Ts'ebetso ea motlakase habeli kapa e le 'ngoe
• Eclipse Operating System (EOS)
• Motšehare le bosiu sensor (DNS)
• Ts'ebetso ea enjene ea 24 kapa 12 Volt DC
• Ho qala ha motor le bonolo ho emisa
• Ho lokisa lebelo le matla
• LCD e kholo ea 4-line ho bontša boemo ba balaoli le litaelo tsa ho seta
• 1-Touch control bakeng sa ho seta habonolo
• Ho etsa profil ka otho o sebelisa theknoloji ea morao-rao e bohlale
• Lisebelisoa tse fapaneng, konopo ea ho tobetsa, bula feela, koala feela, emisa, motho ea tsamaeang ka maoto le Photoelectric Beam
• E ts'ehetsa li-switches tse fokolang kapa ho emisa ka mochini
• Ho Koala ka Auto e ka feto-fetohang, mojaro o sitisang le phihlello ea ba tsamaeang ka maoto
• Lotlolo e ka feto-fetohang le mabone a khantšitsoeng
• Mesebetsi e feto-fetohang ea tšireletso ea photoelectric
• Penta Receiver e hahiloeng kahare
• Mokhoa oa ho boloka matla ho fokotsa litšenyehelo tsa ho sebetsa
• 12 le 24 Volt DC Output ho lisebelisoa tsa motlakase
• Lisebelisoa tsa lits'ebeletso, ts'ireletso ea password, mokhoa oa matsatsi a phomolo le likarolo tse ling tse ngata
• E hahiloe ka har'a tjhaja ea 12 le 24 Volt bakeng sa libeteri tsa bekapo
• Boemo ba boemo bo tlase haholo bo etsang hore e be e loketseng liheke tsa letsatsi

Tlhaloso

• Na u se u itokisitse bakeng sa Eclipse? Sistimi ea ts'ebetso ea MC's Eclipse ke sistimi e tsamaisoang habonolo ke basebelisi e sebelisang konopo ea 1-touch ho laola, ho seta le ho tsamaisa liheke, mamati le mekoallo. E sebelisa skrine e kholo ea mela e 4 ea LCD e bonts'ang 'malo o hlakileng oa ts'ebetso ea enjene le boemo ba lintho tsohle tse kenang le tse hlahisoang.
• Molaoli oa MC ha se moloko o latelang feela empa ke phetoho ea papali ea indasteri. Re ne re batla ho theha molaoli o bonolo ho o sebelisa mme o etsa hoo e ka bang tšobotsi efe kapa efe e hlokahalang indastering ea liheke le mamati. MC ha se moloko o latelang feela empa ke "Phetoho e Latelang" indastering ea liheke le mamating e theha Eclipse holim'a lilaoli tsa makoloi tse neng li entsoe pele.
• Taolo ena e ncha e bohlale ea enjene ke papali e ntle ka ho fetisisa bakeng sa heke ea hau ea othomathike kapa li-motor tsa mamati.
• Taolo e bohlale e hahiloe ho tloha fatše ho ea holimo, e ipapisitse le maikutlo a bareki le ho sebelisa theknoloji ea kajeno. Ka mesebetsi ea eona e ruileng, theko e bonolo ea bareki le ho tsepamisa maikutlo nakong ea nts'etsopele e leng boiketlo ba tšebeliso le ho seta ho etsa hore molaoli enoa e be boto ea ho qetela ea ho laola likoloi tsa hau.
• Likhetho tse bonolo tsa Elsema tsa ho eketsa li-control tsa hole kapa mofuta ofe kapa ofe oa Photoelectric Beams li etsa hore ho be le mokhoa o bonolo oa basebelisi, ha o ntse o qoba mokhoa oa ho koala lisebelisoa.
• Likarete tsa taolo li fumaneha ka sebaka sa polasetiki se lekantsoeng sa IP66 bakeng sa lits'ebetso tsa kantle, libeteri tsa bekapo tse nang le tjhaja kapa karete feela. MC e boetse e loketse liheke tsa letsatsi ka motlakase oa eona o tlase haholo.

Nomoro ea Karolo

Karolo Che.	Litaba		Karolo Che.	Litaba
MC	Liheke tse peli kapa tse le 'ngoe le molaoli oa mamati bakeng sa 24 / 12 Volt motor ho fihla ho 120 Watts		MCv2*	Liheke tse peli kapa tse le 'ngoe le molaoli oa mamati bakeng sa 24/12 Volt e kholo ho feta 120 Watts*
MC24E	Habeli kapa selaoli se le seng bakeng sa 24 Volt Motors e kenyelletsa IP66 e kentsoeng ka polasetiki e kentsoeng le transformer		MC12E	Habeli kapa selaoli se le seng bakeng sa 12 Volt Motors e kenyelletsa IP66 e kentsoeng ka polasetiki e kentsoeng le transformer
MC24E2	E tšoana le MC24E plus 24 Volt 2.3Ah betri ea bekapo
MC24E7	E tšoana le MC24E plus 24 Volt 7.0Ah betri ea bekapo		MC12E7	E tšoana le MC12E plus 12 Volt 7.0Ah betri ea bekapo
Letsatsi Liheke
Solar24SP	Solar kit bakeng sa liheke tse peli kapa tse le 'ngoe, e kenyelletsa tjhaja ea letsatsi ea MPPT & 24 Volt 15.0Ah bekapo betri le 40W solar panel.		Solar12	Solar kit bakeng sa liheke tse peli kapa tse le 'ngoe, e kenyelletsa tjhaja ea letsatsi ea MPPT & 12 Volt 15.0Ah betri ea bekapo

*Kaholimo ho 120 Watts e sebelisa MCv2. Ikopanye le Elsema bakeng sa litlhophiso tse khothalelitsoeng.
Karete ea taolo ea MC & MCv2 e ka sebelisoa ho laola liheke tsa othomathike, mamati, liheke tsa boom, lifensetere tsa othomathiki & li-louvres.

Sesebelisoa sa Menu

Tobetsa Master Control bakeng sa metsotsoana e 2 ho kenya menu

Setšoantšo sa Khokahano ea MC

Khokahano ea DNS : K'honeng e kaholimo ho le letona la karete ea taolo ho na le khokahano bakeng sa Sensor ea Mots'eare le Bosiu (DNS). Sensor ena e fumaneha ho tsoa Elsema 'me e sebelisetsoa ho bona motšehare. Sesebelisoa sena se ka sebelisoa ho Koala keiti bosiu, ho bonesa mabone a khabane kapa mabone a likeiti tsa hau bosiu le likarolo tse ling tse ngata tse hlokang ho bonwa bosiu le motšehare.

Mehala ea Motlakase - Phepelo, Li-motor, Betri le Lintho tse Kenyellelitsoeng

• Kamehla tima motlakase pele o kenya mohala.
• Etsa bonnete ba hore lithapo tsohle li phethiloe le hore motor e hokahane le karete ea taolo.
• Bolelele ba likhoele tse khothalelitsoeng e lokela ho ba 12mm bakeng sa likhokahano tsohle tsa polaka ea li-terminal blocks.
• Sets'oants'o se ka tlase se bonts'a phepelo, li-motor, bekapo ea betri le lisebelisoa tse fumanehang le litlhophiso tsa kamehla tsa feme bakeng sa ho kenya ka 'ngoe.

Haeba u sebelisa litopo tsa mochini, fetela ho Setup i-Learning Steps. Tlola karolo ea Limit Switch. Haeba u sebelisa li-switches tse fokolang, etsa bonnete ba hore li hokahane hantle. Karete ea taolo e ka sebetsa ka li-switches tsa moeli tse hokahaneng ka kotloloho le li-terminals tsa likarete kapa ka letoto le nang le enjene.

Pele ho Setupo

Karete ea taolo ea MC e ka kenngoa mefuteng e fapaneng ea ho seta. Ka tlase ke litlhophiso tse 3 tse tloaelehileng. Ho bohlokoa haholo ho khetha mofuta o nepahetseng oa ho seta nakong ea i-Learn.

1. Ha ho li-switches tse fokolang.
   Setupong sena, karete e its'etleha holim'a toro ea hajoale ea enjene ho fumana maemo a bulehileng le a koetsoeng ka botlalo. U hloka ho fetola maqheka a hau ho latela hore heke e bulehe le ho koaloa ka botlalo. Ho beha meketjana e phahameng haholo ho ka etsa hore enjene e eme sebakeng se bulehileng kapa se koetsoeng. (Sheba tataiso ea ho rarolla mathata).
2. Fokotsa li-switches tse hokahaneng le karete ea Taolo.
   Li-switches tsa moeli li ka koaloa ka tloaelo (NC) kapa ka tloaelo Open (NO). U hloka ho khetha mofuta o nepahetseng nakong ea i-Learn. Setupong sena li-switches tsa moeli li hokahantsoe ka kotloloho ho karete ea taolo.
3. Fokotsa li-switches ka letoto le nang le enjene.
   Li-switches tsa moeli li hokahane ka letoto le motlakase. Li-switches tsa moeli li tla khaola motlakase ho enjene ha e kentsoe.

Seta Mehato ea ho Ithuta

1. Sheba LCD 'me u latele litaelo tse bontšitsoeng.
2. Ho seta ho i-Learning kamehla ho ka sitisoa ka konopo ea ho emisa kapa ka ho tobetsa konopo ea Master Control.
3. Kenya Menu 13 ho qala i-Learning kapa likarete tse ncha tsa taolo li tla u susumelletsa hore u etse i-Learning.
4. Karete ea taolo e tla bula le ho koala liheke kapa mamati ka makhetlo a 'maloa ho ithuta mojaro le maeto a maeto. Ena ke profiling ea koloi e sebelisang theknoloji ea morao-rao e bohlale.
5. Buzzer e tla bontša hore thuto e atlehile. Haeba ho ne ho se na buzzer, hlahloba lithapo tsohle tsa motlakase ho kenyelletsa le phepelo ea motlakase ebe u khutlela mohatong oa 1.
6. Haeba u utloa molumo ka mor'a i-Learn, heke kapa lemati le se le loketse ho sebelisoa.

Liphetoho tsa Moeli
Haeba u sebelisa li-switches tse fokolang, etsa bonnete ba hore li hokahane hantle. Karete ea taolo e ka sebetsa ka li-switches tsa moeli tse hokahaneng ka kotloloho le li-terminals tsa likarete kapa ka letoto le nang le enjene. Sheba litšoantšo tse ka tlase:Ka ho tloaeleha, li-switches tsa moeli tse kareteng ea taolo li atisa ho koaloa (NC). Sena se ka fetoloa hore se bulehe ka tloaelo (NO) nakong ea mehato ea ho seta.

Sehlomathiso sa boikhethelo

G4000 - GSM Dialer - 4G Gate Opener
Keketso ea module ea G4000 ho likarete tsa taolo ea Eclipse e fetola ts'ebetso ea tsona ka ho nolofalletsa ts'ebetso ea mehala ea cellular bakeng sa liheke. Khokahano ena e lumella basebelisi ho bula kapa ho koala heke ba le hole ka mohala oa mahala. G4000 e ntlafatsa boiketlo, ts'ireletso le ts'ebetso e nepahetseng, e e etsa ntlafatso e nepahetseng bakeng sa lits'ebetso tsa sejoale-joale tsa taolo ea phihlello.
Sheba setšoantšo sa wiring se ka tlase:

* Hokela ho Open input kareteng ea taolo haeba mosebetsi oa Open Feela o hlokahala

Sesebelisoa sa ka ntle sa wiring

Menu 1 – Koala ka Otho

• Auto Close tšobotsi e koala heke ka bo eona ka mor'a hore nako e behiloeng esale pele e baloe ho fihlela ho zero. Karete ea taolo e na le Auto Close e tloaelehileng le likarolo tse 'maloa tse ikhethang tsa Auto Close e' ngoe le e 'ngoe e na le linako tsa eona tsa ho bala.
• Elsema Pty Ltd e khothalletsa hore Photoelectric Beam e hoketsoe kareteng ea taolo ha ho sebelisoa khetho efe kapa efe ea Auto Close.
• Haeba Stop input e kentswe tshebetsong Auto Close e koetswe bakeng sa potoloho eo feela.
• Sebali sa Auto Close se ke ke sa balla fatše haeba Konopo ea Push, Open kapa Photoelectric Beam e ts'oaroe e sebetsa.

Lenane Che.	Auto Koala Likaroloana	Feme Ea kamehla	E ka fetoha
1.1	Tloaelehileng Auto Close	E tima	1 - 600 metsotsoana
1.2	Koala Auto ka Photoelectric Trigger	E tima	1 - 60 metsotsoana
1.3	Koala Auto Ka mor'a Tšitiso e Butsoeng	E tima	1 - 60 metsotsoana
1.4	Koala Auto ka mor'a hore Matla a Tsosolosoe	E tima	1 - 60 metsotsoana
1.5	Tloaelehileng Auto Close ka Sequential Obstructions	2	Min = Ho tima, Max = 5
1.6	Koala Auto Hafeela E Buletsoe ka Botlalo	E tima	Off / Qalelle
1.7	Ho Koala ka Motlakase Feela Bosiu ka DNS e hokahaneng	E tima	Off / Qalelle
1.8	Etsoa

1. Tloaelehileng Auto Close
   Heke e tla koaloa ka mor'a hore sebali sena sa nako se baloe ho fihlela ho zero.
2. Koala Auto ka Photoelectric Trigger
   Koala ena ea Auto e qala ho bala ho theosa hang ha Beam ea Photoelectric e se e hlakotsoe ka mor'a ho qhomisa le haeba heke e sa buloa ka botlalo. Haeba ho se na seqhutsu sa Photoelectric Beam heke e ke ke ea koala Ka bohona.
3. Koala Auto Ka mor'a Tšitiso e Butsoeng
   Haeba heke e bula 'me e otla tšitiso ka tloaelo heke e tla ema' me e lule sebakeng sena. Haeba ts'ebetso ena e lumelletsoe, tšitiso e tla qala ho balla nako ho ea tlase 'me ka zero e tla koala heke.
4. Koala Auto ka mor'a hore Matla a Tsosolosoe
   Haeba heke e bulehile boemong leha e le bofe 'me ho na le ho hlōleha ha matla, ha matla a tsosolosoa heke e tla koaloa ka nako ena.
5.  Tloaelehileng Auto Close ka Sequential Obstructions
   Haeba Auto Close e tloaelehileng e behiloe 'me nakong ea ho koala ho na le tšitiso, heke e tla ema ebe e buloa hape. Tlhophiso ena e beha nako eo heke e tla leka ho Koala ka Botho. Kamora ho leka moeli o behiloeng heke e tla lula e butsoe.
6. Koala Auto Hafeela E Buletsoe ka Botlalo
   Sebali sa Auto Close se ke ke sa tima ntle le haeba heke e butsoe ka botlalo.
7. Ho Koala Bosiu Feela
   Ha DNS e hokahane 'me kutloisiso (Menu 16.8) e behiloe ka nepo, Auto Close e tla sebetsa bosiu feela.

Lenane la 2 - Phihlello ea Batsamaisi

Ho na le mefuta e 'maloa ea mekhoa ea ho fihlella ba tsamaeang ka maoto. Mokhoa oa ho kena ho ba tsamaeang ka maoto o bula keiti nako e khuts'oane ho lumella motho ho kena hekeng empa e sa lumelle ho kena koloing.
Elsema Pty Ltd e khothaletsa Beam ea Photoelectric e lokela ho hokeloa kareteng ea taolo ha ho sebelisoa khetho efe kapa efe ea Auto Close.

Lenane Che.	motho ea tsamaeang ka maoto Phihlello Likaroloana	Feme Ea kamehla	E ka fetoha
2.1	Nako ea Maeto ea Batsamai	3 metsotsoana	3 - 20 metsotsoana
2.2	Nako ea ho Koala ka Batsamai ka maoto	E tima	1 - 60 metsotsoana
2.3	Nako ea ho Koala Batsamai ka maoto ka PE trigger	E tima	1 - 60 metsotsoana
2.4	Ho Koala Batsamai ka maoto ho Litšitiso tse Sequential	2	Min = Ho tima, Max = 5
2.5	Ho kena ho Batsamai ka maoto ka Hold Gate	E tima	Off / Qalelle
2.6	Etsoa

1. Nako ea Maeto ea Batsamai
   Sena se seta nako eo heke e buloang ka eona ha ho kenoa ha Pedestrian Access e kentsoe tšebetsong.
2. Nako ea ho Koala ka Batsamai ka maoto
   Sena se seta sebala nako bakeng sa ho kwala heke ka boyona ha Motsamao wa Batsamai ka maoto o kentswe tshebetsong.
3. Nako ea ho Koala Batsamai ka maoto ka PE Trigger
   Koala ena ea Auto e qala ho bala ho theosa hang ha Beam ea Photoelectric e se e hlakotsoe ka mor'a ho qhomisa, ha heke e le boemong ba ho Finyella Batsamai. Haeba ho se na sethahasetsi sa Photoelectric Beam heke e tla lula e le boemong ba Ho kena ho Batsamai.
4. Ho Koala Batsamai ka maoto ho Litšitiso tse Sequential
   Haeba Pedestrian Access Auto Close e setilwe mme heke e koaleha nthong e itseng heke e tla ema ebe e bula hape. Tlhophiso ena e beha nako eo heke e tla leka ho Koala ka Botho. Kamora ho leka moeli o behiloeng heke e tla lula e butsoe.
5. Ho kena ho Batsamai ka maoto ka Hold Gate
   Haeba heke e ts'oarellang ea Batsamaisi e BUTSE 'me Keiti ea Batsamai e kentsoe ka ho sa feleng heke e tla lula e butsoe sebakeng sa Batsamaisi ba Pedestrian. Kenyelletso e bulehileng, Konopo e koalehileng, Konopo ea Push le li-remoutu tse kentsoeng. E sebelisoa lits'ebetsong tsa ho tsoa ha Mollo.

Menu 3 - Mesebetsi ea ho kenya

Sena se o lumella ho fetola Polarity ea Photoelectric Beam, ho emisa le ho fokotsa li-switches.

Lenane Che.	Kenyeletso Mesebetsi	Feme Ea kamehla	E ka fetoha
3.1	Photoelectric Beam Polarity	Hangata E Koaletsoe	Ka tlwaelo e kwetswe/ E butswe ka tlwaelo
3.2	Moeli Switch Polarity	Hangata E Koaletsoe	Ka tlwaelo e kwetswe/ E butswe ka tlwaelo
3.3	Emisa Polarity ea ho Kena	Ka tloaelo Open	Ka tlwaelo E Bulehile / E Koetsoe Hangata
3.4*	Kenyelletso e Thusang (M2 Open Limit Terminal)	E holofetse	Thibela / Safety Bump Strip
3.5	Etsoa

Khetho ena e fumaneha feela ha e sebelisoa molemong oa heke e le 'ngoe
Theminale ea Motor 2 Open Limit e ka sebelisoa ho thapo lesela la tšireletso la Elsema ts'ebelisong ea heke e le 'ngoe. Mesebetsi ea eona e tšoana le e behiloeng ho menu 12.7.

Lenane la 4 - Beam ea Photoelectric

Photoelectric Beam kapa sensor ke sesebelisoa sa polokeho se behoang ka mose ho heke 'me ha sefate se thijoa se emisa heke e tsamaeang. Ts'ebetso ka mor'a hore heke e eme e ka khethoa ho menu ena.

Lenane Che.	Motlakase oa lifoto Sebopeho sa Beam	Feme Ea kamehla	E ka fetoha
4.1	Beam ea Photoelectric	PE Beam e ema ebe e bula heke ka nako e haufi	PE Beam e emisa ebe e bula heke ka potoloho e haufi.
4.2	Etsoa

Boemo ba feme bakeng sa ho kenya beam ea PE "hangata bo koetsoe" empa sena se ka fetoloa hore se bulehe ka tloaelo ho menu 3.
Elsema Pty Ltd e khothalletsa hore Photoelectric Beam e hoketsoe kareteng ea taolo ha ho sebelisoa khetho efe kapa efe ea Auto Close.
Elsema e rekisa mefuta e fapaneng ea Mabone a Photoelectric. Re boloka Retro-Reflective le Ka Beam Photoelectric Beams.

Photo Beam Wiring

Menu 5 – Relay Output Functions

Karete ea taolo e na le liphetho tse peli tsa relay, Output 1 le Output 2. Mosebelisi a ka fetola ts'ebetso ea liphetho tsena ho notlela / brake, khanya ea tlhompho, mohala oa ts'ebeletso, leseli la strobe (Temoso), actuator ea ho notlela kapa heke e butsoe (heke e sa koaloa ka botlalo. ) sesupo.
Output 1 ke voltage sa lefelloeng relay tlhahiso e nang le mabitso a tloaelehileng le a tloaelehileng a bulehileng. Feme ea kamehla ke ts'ebetso ea senotlolo / brake tokollo.
Output 2 ke voltage sa lefelloeng relay tlhahiso e nang le mabitso a tloaelehileng, a tloaelehileng a bulehileng le a tloaelehileng a koetsoeng. Ho hloleha ha feme ke ts'ebetso ea mabone a tlhompho.

Menyu No.	Mosebetsi oa Relay Output	Feme ea kamehla	E ka fetoha
5.1	Relay Output 1	Notlela / Brake	Lock / BrakeCourtesy Light Service Call—————————————Strobe (Temoso) LightLocking Actuator Gate e butsoe
5.2	Relay Output 2	Ka tlhompho Leseli	Lock / Brake Courtesy Light Service CallStrobe (Temoso) Light Gate Open
5.3	Etsoa

Notlela / Brake Output
Boemo ba feme bakeng sa tlhahiso ea 1 ke tokollo ea senotlolo / brake. Output 1 ke voltagkhokahano ea e-free ea relay le mabitso a tloaelehileng le a bulehileng hangata. Ho ba le eona voltagE-free eu lumella ho hokela 12VDC/AC, 24VDC/AC kapa 240VAC ho tse tloaelehileng. Lebitso le tloaelehileng le bulehileng le khanna sesebelisoa. Sheba setšoantšo se ka tlase:

Ka tlhompho Leseli
Moetso oa feme bakeng sa lebone la courtesy ke tlhahiso ea 2. Output 2 is a voltagkhokahanyo ea e-free ea relay le mabitso a tloaelehileng, ao hangata a bulehileng le a koetsoeng. Ho ba le eona voltagE-free eu lumella ho hokahanya phepelo ea 12VDC/AC, 24VDC/AC kapa 240VAC ho tse tloaelehileng. Lebitso le tloaelehileng le bulehileng le khantša leseli. Sheba setšoantšo leqepheng le latelang.

Sephetho sa Mehala ea Ts'ebeletso
Ekaba output 1 kapa output 2 e ka fetolelwa ho sesupo sa call ya tshebeletso. Sena se tla hlahisa tlhahiso ha k'haontara ea tšebeletso ea software e fihletsoe. E sebelisoa ho hlokomelisa ba kenyang kapa beng ba matlo ha tšebeletso e le teng bakeng sa heke. Ho sebelisa seamoheli sa GSM sa Elsema ho lumella ba kenyang kapa beng ba bona ho fumana molaetsa oa SMS le mohala ha ts'ebeletso e le teng.

Strobe (Tlhokomeliso) Lebone ha o bula kapa o koala
Sephetho sa relay se kengoa tšebetsong neng kapa neng ha heke e sebetsa. Feme ea kamehla e Koetsoe. Ekaba tlhahiso ea 1 kapa ea 2 e ka fetoleloa ho leseli la strobe (Temoso). Liphetho ka bobeli ke matlataglikhokahano tsa e-free. Ho ba le eona voltagE-free eu lumella ho hokela phepelo ea 12VDC/AC, 24VDC/AC kapa 240VAC ho tse tloaelehileng ho matlafatsa lebone la strobe. Ebe lebitso le tloaelehileng le bulehileng le khantša leseli. Sheba setšoantšo se ka holimo.

Sesebelisoa sa ho notlela
Locking actuator mode e sebelisa bobeli relay output 1 le relay output 2. Liphetho tse 2 li sebelisoa ho fetola polarity ea locking actuator ho notlela le ho notlolla nakong ea ho bula le ho koala potoloho. Nakong ea tlhahiso ea pele e butsoeng ea 1 ke "ON" 'me nakong ea morao-rao tlhahiso ea relay 2 ke "ON". Linako tsa pele ho ho bula le ka mor'a ho koaloa li ka fetoloa.

Keke E Bulehile
Sehlahisoa sa relay se kenngoa neng kapa neng ha heke e sa koaloa ka botlalo. Feme ea kamehla e Koetsoe. Ekaba sephetho sa 1 kapa sephetho sa 2 se ka fetoloa hore ebe heke e butsoe.

Menu 6 – Relay Output Modes

Lenane la 6.1 - Lock / Brake
Tlhahiso ea relay ka har'a mokhoa oa senotlolo / brake e ka hlophisoa ka mekhoa e fapaneng.

Lenane Che.	Notlela / Brake Mekhoa	Feme Ea kamehla	E ka fetoha
6.1.1	Open Lock / Brake Activation	2 metsotsoana	1 - 30 metsotsoana kapa u tšoare
6.1.2	Koala Lock / Brake Activation	E tima	1 - 30 metsotsoana kapa u tšoare
6.1.3	Bula Pre-Lock / Brake Activation	E tima	1 - 30 metsotsoana
6.1.4	Koala Pre-Lock / Brake Activation	E tima	1 - 30 metsotsoana
6.1.5	Drop Lock	E tima	Off / Qalelle
6.1.6	Etsoa

1. Open Lock / Brake Activation
   Sena se beha nako eo tlhahiso e kentsoeng ka eona. Femethari ea kamehla ke metsotsoana e 2. Ho e beha ho Hold ho bolela hore tlhahiso e kentsoe tšebetsong bakeng sa kakaretso ea nako ea ho tsamaea sebakeng se bulehileng.
2. Koala Lock / Brake Activation
   Sena se beha nako eo tlhahiso e kentsoeng ka eona. Kakaretso ea feme e koetsoe. Ho e beha ho Tšoaroa ho bolela hore tlhahiso e kentsoe tšebetsong bakeng sa kakaretso ea nako ea leeto le haufi.
3. Bula Pre-Lock / Brake Activation
   Sena se beha nako eo tlhahiso e kentsoeng pele motlakase o qala ka tsela e bulehileng. Kakaretso ea feme e Koetsoe.
4. Koala Pre-Lock / Brake Activation
   Sena se beha nako eo tlhahiso e kentsoeng pele enjene e qala ka tsela e haufi. Kakaretso ea feme e Koetsoe.
5. Drop Lock
   Mokhoa ona o lokela ho etsoa ha ho sebelisoa senotlolo. E tla tšoara senotlolo haeba liheke li emisoa bohareng ba leeto la eona.

Menu 6.2 - Courtesy Light
Sephetho sa relay ka mokhoa oa tlhompho se ka fetoloa ho tloha metsotsoana e 2 ho isa ho lihora tse 18. Sena se beha nako eo lebone la tlhompho le kentsoeng ka lona ka mor'a hore heke e eme. Tlhōrō ea feme ke motsotso o le mong.

Lenane Che.	Ka tlhompho Leseli Mokhoa	Feme Ea kamehla	E ka fetoha
6.2.1	Ka tlhompho ea Light Activation	motsotso o le 1	Metsotsoana e 2 ho Lihora tse 18
6.2.2	Courtesy Light Bosiu Feela ka DNS (Mots'eare le Bosiu Sensor) E hokahantsoeng	E tima	Off / Qalelle
6.2.3	Etsoa

Menu 6.3 – Strobe (Temoso) Leseli
Leseli la relay ka har'a leseli la strobe (Temoso) le lula le "buitse" ha heke e ntse e tsamaea. Tlhahiso ena e ka boela ea hlophisoa hore e tle "ho" pele heke e qala ho tsamaea.

Lenane Che.	Strobe (Temoso) Mokhoa oa Leseli	Feme Ea kamehla	E ka fetoha
6.3.1	Pre-Open Strobe (Tlhokomeliso) Ts'ebetso ea Leseli	E tima	1 - 30 metsotsoana
6.3.2	Koala Pele ho Koala Strobe (Tlhokomeliso) Tšebeliso ea Leseli	E tima	1 - 30 metsotsoana
6.3.3	Etsoa

1. Pre-Open Strobe Light Activation
   Sena se beha nako eo lebone la strobe le sebetsang ka lona pele heke e sebetsa ka tsela e bulehileng. Kakaretso ea feme e Koetsoe.
2. Kenyelletso ea Leseli la Strobe pele ho Koala
   Sena se beha nako eo lebone la strobe le sebetsang ka lona pele heke e sebetsa haufi. Kakaretso ea feme e Koetsoe.

Menu 6.4 – Pitso ya Tshebeletso
Sena se beha palo ea lipotoloho tse felletseng (ho buloa le ho koaloa) tse hlokahalang pele buzzer e hahelletsoeng ka hare e kengoa tšebetsong. Hape liphetho tsa karete ea taolo li ka hlophisoa hore li sebelisoe haeba palo ea lipotoloho e phethiloe. Ho hokela moamoheli oa GSM oa Elsema ho sephetho ho lumella beng ba bona ho fumana mohala le molaetsa oa SMS ha ts'ebeletso e le teng.
Ha molaetsa oa "Service Call Due" o hlaha ho LCD, ho tla hlokahala mohala oa ts'ebeletso. Kamora hore tshebeletso e etswe, latela melaetsa e ho LCD.

Lenane Che.	Tshebeletso Letsa Mokhoa	Feme Ea kamehla	E ka fetoha
6.4.1	Counter ea litšebeletso	E tima	Min: 2000 ho ea ho Max: 50,000
6.4.2	Etsoa

Menu 6.5 – Locking Actuator
Nako eo tlhahiso ea 1 e "bulelang" pele heke e qala ho buloa le nako eo relay 2 e "buloang" ka mor'a hore heke e koaloe ka botlalo e ka fetoloa ka tsela e ka tlase:

Menyu No.	Sesebelisoa sa ho notlela	Feme ea kamehla	E ka fetoha
6.5.1	Ketso ea ho notlela pele ho Bula	E tima	1 - 30 metsotsoana
6.5.2	Ts'ebetso ea Lock ea Kamora ho Koala	E tima	1 - 30 metsotsoana
6.5.3	Etsoa

Ketso ea ho Bula Pele ho Locking Actuator
Sena se beha hore nako ea 1 e fetisetsoe pele heke e sebetsa ka tsela e bulehileng. Kakaretso ea feme e Koetsoe.

Ts'ebetso ea ho Locking ka mor'a ho Koala
Sena se etsa hore nako ea 2 e fetisetsoe ka mor'a hore heke e koetsoe ka botlalo. Kakaretso ea feme e Koetsoe.

Lenane la 7 - Likarolo tse Khethehileng

Karete ea taolo e na le likarolo tse ngata tse ikhethang tseo kaofela li ka ikamahanyang le ts'ebeliso ea hau e ikhethileng.

Lenane Che.	E khethehileng Likaroloana	Feme Ea kamehla	E ka fetoha
7.1	Remote Control Bula Feela	E tima	Off / Qalelle
7.2	Holiday Mode	E tima	Off / Qalelle
7.3	Mokhoa oa ho Boloka Matla	E tima	Off / Qalelle
7.4	Emisa ka Othomathike 'me U Bule ha U koala	On	Off / Qalelle
7.5	Receiver Channel 2 Dikgetho	E tima	Koala / Leseli / Phihlello ea Batsamai / E Koala Feela
7.6	Tobetsa 'me U hatelle Bakeng sa Kenyo e Butsoeng	E tima	Off / Qalelle
7.7	Tobetsa 'me U hatelle Bakeng sa ho Koala Kenyo	E tima	Off / Qalelle
7.8	Fesetere / Louvre	E tima	Off / Qalelle
7.9	Ho kenya Moea	E tima	E theohile / E tlase / e mahareng / E phahameng
7.10	Tobetsa 'me u tšoare Channel 1 e hole (Bula)	E tima	Off / Qalelle
7.11	Tobetsa 'me u tšoare Channel 2 e hole (Koala)	E tima	Off / Qalelle
7.12	Emisa ho Kena	Emisa Kgoro	Ema 'me u khutlele morao bakeng sa 1sec
7.13	Etsoa

1. Remote Control Bula Feela
   Ka ho sa feleng, remoutu e lumella mosebelisi ho bula le ho koala heke. Libakeng tseo batho ba kenang ho tsona, mosebelisi o lokela ho bula heke feela mme a se ke a tšoenyeha ka ho e koala. Hangata, Auto Close e sebelisoa ho koala heke. Mokhoa ona o thibela ho koala ha li-remoutu.
2. Holiday Mode
   Karolo ena e tima li-remoutu tsohle.
3. Mokhoa oa ho Boloka Matla
   Sena se beha karete ea taolo maemong a tlase haholo a standby a fokotsang sekoloto sa hau sa motlakase ha o ntse o boloka tšebetso le ts'ebetso e tloaelehileng.
4. Emisa ka Othomathike 'me U Bule ha U koala
   Ka tsela e iketsang ha heke e koalehile 'me konopo ea push kapa remote control e kentsoe tšebetsong e tla ema ebe e bula heke. Ha sesebelisoa sena se koetsoe, heke e tla ema feela ha o bula konopo ea push kapa remote control. Ho bula ka bohona ho tla tingoa.
5. Receiver Channel 2 Dikgetho
   Lenaneo la 2 la baamoheli le ka hlophisoa ho laola lebone la tlhompho, phihlello ea ba tsamaeang ka maoto kapa le ka sebelisoa bakeng sa Haufi feela.
6. & 7.7 Tobetsa o Tshware bakeng sa Dikenyo tse Bulehileng le ho kwala
   Haeba tšobotsi ena e BUITSE mosebelisi o tlameha ho lula a tobetsa konopo e butsoeng kapa e koalang hore heke e sebetse.
7. Fensetere kapa Mokhoa oa Louvre
   Mokhoa ona o ntlafatsa karete ea taolo bakeng sa ho sebetsa lifensetere kapa li-louvres.
8. Ho kenya Moea
   Lumella mokhoa ona bakeng sa liheke tse kentsoeng sebakeng sa Moea o Moholo.
9. & 7.11 Tobetsa 'me U Tšoarele Bakeng sa Remote Channel 1 (Bula) le Channel 2 (Koala)
   Likonopo tsa kanale tsa 1 & 2 li tla hloka ho hlophisoa ho mocha oa 1 & 2. Mosebelisi o tlameha ho tobetsa le ho tšoara konopo ea remote hore heke e bule kapa e koale.
10. Emisa Likhetho tsa ho Kena
    Ha sesebelisoa sena se BUTSE 'me haeba ho emisa ho kentsoe, liheiti ka bobeli li tla ema ebe li khutlela morao bakeng sa 1 sec.

Lenane la 8 - Ho lieha ha Lekhasi

Ho lieha ha makhasi ho sebelisoa ha lekhasi le le leng la heke le tla koala ka boemo ba ho fetana ho lekhasi la pele le koetsoeng. Ho lieha hona ha makhasi ho ka boela ha hlokahala bakeng sa lithakhisa tse khethehileng tsa ho notlela. Karete ea taolo e na le tieho e arohaneng ea makhasi bakeng sa litsela tse bulehileng le tse haufi.
Ha karete ea taolo e sebelisoa ka enjene e le 'ngoe mokhoa oa ho lieha ha makhasi oa tima.

Lenane Che.	Lekhasi tieho	Feme Ea kamehla	E ka fetoha
8.1	Open Lekhasi Ho lieha	3 metsotsoana	E tima - metsotsoana e 25
8.2	Koala Tieho ea Lekhasi	3 metsotsoana	E tima - metsotsoana e 25
8.3	Koala Tieho ea Lekhasi Bohareng ba Stop	E tima	Off / Qalelle
8.4	Etsoa

1. Open Lekhasi Ho lieha
   Motor 1 e tla qala ho bula pele. Kamora hore nako ea ho lieha ha makhasi e felile, motor 2 e tla qala ho buloa.
2. Koala Tieho ea Lekhasi
   Motor 2 e tla qala ho koala pele. Kamora hore nako ea ho lieha ha makhasi e felile, motor 1 e tla qala ho koala.
3. Koala Tieho ea Lekhasi Bohareng ba Stop
   Ka kamehla enjene ea 1 e tla lula e na le tieho ha e koala le haeba heke e sa buloa ka botlalo. Ha e holofetse motor 1 le motor 2 li tla qala ho koala ka nako e le 'ngoe feela ha li sa buloa ka botlalo.

Menu 9 – Motor 1 Thibelo Fumana Margins

Sena se seta moeli oa sensitivity oa hajoale kaholimo ho lebelo le tloaelehileng ho khopisa heke haeba ho ka bonoa tšitiso. Mekhahlelo e fapaneng ea litšitiso e ka beoa bakeng sa tsela e bulehileng le e haufi. Hape nako ea karabo ea fetoha.
Moeli o fokolang o tla lumella khatello e fokolang e kentsoeng ho khopa heke haeba e otla ntho. Moeli o ka holimo o tla lumella tekanyo e kholo ea khatello e sebelisoang ho khopa heke haeba e otla ntho.

Lenane Che.	Motlakase oa 1 o Thibela Mehato le Nako ea Karabelo	Feme Ea kamehla	E ka fetoha
9.1	Bula Margin ea Thibelo	1 Amp	0.2 - 6.0 Amps
9.2	Koala Margin ea Thibelo	1 Amp	0.2 - 6.0 Amps
9.3	Bula 'me U Koale Mokhahlelo oa Tšitiso ea Slow Speed	1 Amp	0.2 - 6.0 Amps
9.4	Tšitiso Lemoha Nako ea Karabelo	Mahareng	E Potlakile, e Mahareng, e na le butle ebile e lieha haholo
9.5	Etsoa

Margin Example
Motor e sebetsa ho 2 Amps mme moeli o behiloe ho 1.5 Amps, tšibollo ea tšitiso e tla etsahala ka 3.5 Amps (Tsela e Tloaelehileng ea ho Running Current + Margin).
Bakeng sa litlhophiso tse phahameng tsa marang-rang, transformer ea phepelo e lokela ho ba kholo ka ho lekana ho fana ka matla a holimo.
Haeba heke e otla ntho ha e koala e tla ema ka bo eona ebe e bula hape. Haeba heke e otla ntho ha e bula e tla emisa ka bo eona.

Menu 10 – Motor 2 Thibelo Fumana Margins

Sena se seta moeli oa sensitivity oa hajoale kaholimo ho lebelo le tloaelehileng ho khopisa heke haeba ho ka bonoa tšitiso. Mekhahlelo e fapaneng ea litšitiso e ka beoa bakeng sa tsela e bulehileng le e haufi. Hape nako ea karabo ea fetoha.
Moeli o fokolang o tla lumella khatello e fokolang e kentsoeng ho khopa heke haeba e otla ntho. Moeli o ka holimo o tla lumella tekanyo e kholo ea khatello e sebelisoang ho khopa heke haeba e otla ntho.

Lenane Che.	Motlakase oa 2 o Thibela Mehato le Nako ea Karabelo	Feme Ea kamehla	E ka fetoha
10.1	Bula Margin ea Thibelo	1 Amp	0.2 - 6.0 Amps
10.2	Koala Margin ea Thibelo	1 Amp	0.2 - 6.0 Amps
10.3	Bula 'me U Koale Mokhahlelo oa Tšitiso ea Slow Speed	1 Amp	0.2 - 6.0 Amps
10.4	Tšitiso Lemoha Nako ea Karabelo	Mahareng	E Potlakile, e Mahareng, e na le butle ebile e lieha haholo
10.5	Etsoa

Margin Example
Motor e sebetsa ho 2 Amps mme moeli o behiloe ho 1.5 Amps, tšibollo ea tšitiso e tla etsahala ka 3.5 Amps (Tsela e Tloaelehileng ea ho Running Current + Margin).
Bakeng sa litlhophiso tse phahameng tsa marang-rang, transformer ea phepelo e lokela ho ba kholo ka ho lekana ho fana ka matla a holimo.
Haeba heke e otla ntho ha e koala e tla ema ka bo eona ebe e bula hape. Haeba heke e otla ntho ha e bula e tla emisa ka bo eona.

Menu 11 - Lebelo la Motor, Sebaka sa Lebelo le Lebelo le Nako e Khutlileng

Lenane Che.	Lebelo la Motor, Lebelo le Butle Sebaka le Nako ea ho Khutlisa	Feme Ea kamehla	E ka fetoha
11.1	Bula Lebelo	80%	50% ho isa ho 125%
11.2	Koala Lebelo	70%	50% ho isa ho 125%
11.3	Bula le ho Koala Butle Lebelo	50%	25% ho isa ho 65%
11.4	Bula Slow Speed ​​Area	4	1 ho ea ho 12
11.5	Koala Slow Speed ​​Area	5	1 ho ea ho 12
11.6	Emisa ho Fetola tieho	0.4 metsotsoana	Metsotsoana e 0.2 ho isa ho e 2.5
11.7	Etsoa

1. & 11.2 Bula le ho Koala Lebelo
   Sena se beha lebelo leo heke e tla tsamaea ka lona. Haeba heke e tsamaea ka potlako haholo fokotsa boleng bona.
2. Butle Lebelo
   Sena se beha lebelo leo heke e tla tsamaea ka lona sebakeng sa lebelo le liehang. Haeba heke e tsamaea butle haholo eketsa boleng bona.
3. & 11.5 Slow Speed ​​Area
   Sena se beha sebaka sa ho tsamaea butle ka lebelo. Haeba u batla nako e eketsehileng ea ho tsamaea bakeng sa sebaka sa lebelo le liehang eketsa boleng bona.
4. Thibelo Stop Reverse Delay Time
   Sena se beha nako ea ho emisa le ho khutlisa morao ha heke e thula tšitiso.

Menu 12 - Anti-Jam, Electronic Braking le Movement ea Heke ka mor'a ho Thibela

nu Che.	Anti-Jam kapa Braking ea elektroniki	Feme Ea kamehla	E ka fetoha
12.1	Motor 1 Bula Anti-Jam	TLOA	Metsotsoana e 0.1 ho isa ho e 2.0
12.2	Motor 1 Koala Anti-Jam	TLOA	Metsotsoana e 0.1 ho isa ho e 2.0
12.3	Motor 2 Bula Anti-Jam	TLOA	Metsotsoana e 0.1 ho isa ho e 2.0
12.4	Motor 2 Koala Anti-Jam	TLOA	Metsotsoana e 0.1 ho isa ho e 2.0
12.5	Braking ea elektroniki	TLOA	Off / Qalelle
12.6	Tataiso ea ho Bula : Motsamao oa Heke ka mor'a Tšitiso	Heke E Emang	Emisa / Khutlela morao bakeng sa metsotsoana e 2 / Khutlela ka Botlalo
12.7	Tataiso e Koala : Motsamao oa Heke Ka mor'a Tšitiso	Khutlela morao ka metsotsoana e 2	Emisa / Khutlela morao bakeng sa metsotsoana e 2 / Khutlela ka Botlalo
12.8	Etsoa

• le 12.2 Motor 1 Bula le ho Koala Anti-Jam
  Ha heke e bulehile ka ho feletseng kapa e koetsoe ka ho feletseng, tšobotsi ena e sebetsa ka reverse voltage ka nako e khuts'oane haholo. E tla thibela enjene hore e se ke ea koala heke kahoo ho bonolo ho tlosa li-motors bakeng sa ts'ebetso ea matsoho.
• le 12.4 Motor 2 Bula le ho Koala Anti-Jam
  Ha heke e bulehile ka ho feletseng kapa e koetsoe ka ho feletseng, tšobotsi ena e sebetsa ka reverse voltage ka nako e khuts'oane haholo. E tla thibela enjene ho jamming up heke kahoo ho ke ke ho le bonolo ho
  tlosa li-motor bakeng sa ts'ebetso ea matsoho.
• Braking ea elektroniki
  Sena se tla emisa li-motors ka brake ea elektroniki. Brake e sebetsa ho thibela le ho Stop inputs.
• Tataiso ea ho Bula : Motsamao oa Heke ka mor'a Tšitiso
  Ka mor'a hore ho be le tšitiso ha e bula, heke e tla ema, e khutlele morao ka metsotsoana e 2 kapa
  furalla ka botlalo.
• Tataiso e Koala : Motsamao oa Heke Ka mor'a Tšitiso
  Ka mor'a hore ho be le tšitiso ha u ntse u koala, heke e tla ema, e khutlele morao ka metsotsoana e 2 kapa e furalle ka ho feletseng.

Menu 13 – i-Learning

Sebopeho sena se u lumella ho etsa thuto e bohlale ea maeto a heke. Latela melaetsa e ho LCD ho phethela thuto

Lenane la 14 - Password

Sena se tla lumella mosebelisi ho kenya phasewete ho thibela basebelisi ba sa lumelloeng ho kena litlhophisong tsa karete ea taolo. Mosebedisi o lokela ho hopola phasewete. Mokhoa o le mong feela oa ho seta phasewete e lahlehileng ke ho khutlisetsa karete ea taolo ho Elsema.
Ho phumula phasewete, kgetha Menu 14.2 ebe o tobetsa Master Control.

Lenane la 15 - Litlaleho tsa Ts'ebetso

Sena ke sa tlhahisoleseding feela.

Lenane Che.	Ts'ebetso Litlaleho
15.1	Nalane ea Ketsahalo, ho fihla liketsahalong tse 100 tse tlalehiloeng mohopolong
15.2	E bonts'a Ts'ebetso ea Liheke le Maemo a Currents
15.3	Seta Botjha Lirekoto tse Phahameng tsa Hona Joale
15.4	Etsoa

• Nalane ea Ketsahalo
  Nalane ea ketsahalo e tla boloka liketsahalo tse 100. Liketsahalo tse latelang li tlalehiloe mohopolong: Power On, Low Battery, All input activations, Ho Bula ka Katleho, Ho Koala ka Katleho, Thibelo e Lemohuoe, Teko e sa Atlehang ea ho Ithuta, Factory Reset, DC Output Overload, AC Supply Resstored, AC Supply Restored, Autoclose, Security Close and Fustruction.
• E bonts'a Ts'ebetso le Maemo a Hona Joale
  Sena se bonts'a palo ea lipotoloho tse bulehileng, lipotoloho tse haufi, lipotoloho tsa ba tsamaeang ka maoto, litšitiso tse bulehileng, litšitiso tse haufi le maemo a hona joale a makoloi. Boleng ba boleng ba hajoale bo ka hlophisoa bocha ke mosebelisi ho Menu 15.3

Lenane la 16 - Lisebelisoa

Lenane Che.	Lisebelisoa
16.1	Palo ea Motors, Single kapa Double Gate System
16.2	Beha Phepelo Voltage: 12 kapa 24 Volts
16.3	Seta Selaoli bocha ho Litlhophiso tsa Feme
16.4	Litlhaloso tsa Teko
16.5	Nako ea ho Tsamaea bakeng sa Slip Clutch Motors
16.6	Solar Gate Mode : E ntlafatsa Karete ea Taolo bakeng sa Lisebelisoa tsa Solar
16.7	Mofuta oa Fuse: 10 kapa 15 Amps E ntlafatsa Karete ea Taolo bakeng sa Fuse e nepahetseng ea Blade e sebelisitsoeng
16.8	Phetoho ea Boikutlo ba Motšehare le Bosiu bakeng sa DNS
16.9	Slow Speed ​​Ramp Nako e tlase
16.10	Etsoa

1. Nomoro ea Motors
   Sena se o lumella ho beha karete ea taolo ho enjene e le 'ngoe kapa habeli. Karete ea taolo e tla itlhahloba bakeng sa li-motors tse hoketsoeng nakong ea ho seta.
2. Beha Phepelo Voltage
   Sena se o lumella ho beha karete ea taolo ho phepelo ea 12 kapa 24 Volt. Karete ea taolo e tla beha phallo e nepahetseng ka bo eonatage nakong ea ho seta. Ho sebelisa karete ea taolo ts'ebetsong ea letsatsi o tlameha ho seta molumo o nepahetsengtage ho Lisebelisoa. Sena se tla tima "automatic vol".tage sensing e ka bakang mathata lits'ebetsong tsa letsatsi.
3. Resets Controller
   Seta bocha li-setting tsohle hore e be tsa kamehla tsa feme. E boetse e tlosa password.
4. Litlhaloso tsa Teko
   Sena se o lumella ho lekola lisebelisoa tsohle tsa kantle tse hokahaneng le likenyelletso tsa balaoli. UPPERCASE e bolela hore ho kenya ho kentswe tshebetsong mme mongolo o monyane o bolela hore ho kenya ha ho sebetse.
5. Nako ea ho Tsamaea bakeng sa Slip Clutch Motors
   Sena se o lumella ho sebelisa molaoli o nang le linako tsa maeto. Motor 1 le 2 li ka ba le linako tse arohaneng tsa maeto ho fihlela metsotsoana e 120. E sebelisoa bakeng sa Hydraulic Motors.
6. Slow Speed ​​Ramp Nako e tlase
   Sena se o nolofalletsa ho fetola nako eo e nkang heke ho fetola lebelo la eona ho tloha ka potlako ho ea ho butle.

LCD Pontšo E Hlalositsoe

Boemo ba Heke	Tlhaloso
Heke E Buletsoe	Heke e sebakeng se bulehileng ka botlalo
Heke E Koetsoe	Heke e sebakeng se haufi ka ho feletseng
Heke E Ema	Heke e emisitsoe ke e 'ngoe ea lisebelisoa kapa remote control
Tšitiso e fumanwe	Karete ea ho laola e utloile tšitiso
Moedi Switch Boemo	Tlhaloso
M1OpnLmON	Motor 1 Open limit switch e BUTSE
M2OpnLmON	Motor 2 Open limit switch e BUTSE
M1ClsLmON	Motor 1 Close limit switch E BUTSE
M2ClsLmON	Motor 2 Close limit switch E BUTSE
Boemo ba ho Kena	Tlhaloso
Bula	Kentswe e butsweng e kentswe tshebetsong
Cls ON	Koala e kentsweng tshebetsong
Stp ON	Stop input e kentswe tshebetsong
PE ON	Photo Beam input e kentswe tshebetsong
PB ON	Kentswe ya Push Button e kentswe tshebetsong
PED TSOHLE	Kenyelletso ya Batsamai ka maoto e kentswe tshebetsong

Tataiso ea tharollo ea mathata

Nakong ea i-Learn, heke e tla bula le ho koala makhetlo a 3. Potoloho ea pele e tsamaea butle. Potoloho ea bobeli e lebelo le potlakileng. Potoloho ea boraro e tla ba ka lebelo le potlakileng empa heke e tla fokotseha pele e fihla qetellong.

Phoso nakong ea i-Learn	Pheko
i-Learn e tsitsitse ho 14%	Fokotsa M1 le M2 Slow Speed ​​Obstruction Margin (Menu 9.3 & 10.3)
i-Learn e tsitsitse ho 28%	Fokotsa M1 le M2 Open Obstruction Margin (Menu 9.1 & 10.1)
Liheke ha li bulehe ka botlalo kapa ha li koalehe ka botlalo molemong oa 1st i-Learn cycle	Eketsa M1 le M2 Slow Speed ​​Obstruction Margin (Menu 9.3 & 10.3)
Liheke ha li bulehe ka botlalo kapa ha li koalehe ka botlalo saekeleng ea 2 ea i-Learn	Eketsa M1 le M2 Tsela e Buleng kapa e Koale ea Thibelo (Menu 9.1, 9.2 & 10.1, 10.2)
Limit switch e hlolehile ho ngodisa mme heke ha e so butswe kapa ha e koetswe ka botlalo.	Bakeng sa potoloho ea 1. Eketsa M1 le M2 Slow Speed ​​Obstruction Margin (Menu 9.3 & 10.3). Bakeng sa potoloho ea 2nd & 3rd. Eketsa M1 le M2 Tsela e Buleng kapa e Koale ea Thibelo (Menu 9.1, 9.2 & 10.1, 10.2)
Limit switch e hlolehile ho ngodisa mme heke e butswe ka botlalo kapa e kwetswe.	Boemo ba phetoho ea moeli ha boa nepahala. Keiti e fihlile ho sethibelo sa 'mele kapa ke sebaka se phahameng sa ho tsamaea pele switch ea moeli e ka buloa.
Phoso nakong ea Ts'ebetso	Pheko
Heke ha e bulehe kapa ha e koalehe ka botlalo empa LCD e re "Heke e Butsoe" kapa "Heke e koetsoe".	Eketsa M1 le M2 Slow Speed ​​Obstruction Margin (Menu 9.3 & 10.3) ho itšetlehile ka hore na ke motlakase ofe o sa kang oa bula kapa oa koaloa ka botlalo.
LCD e re "Obstruction detected" ha ho na tšitiso.	Eketsa M1 le M2 Tsela e Buleng kapa e Koale ea Thibelo (Menu 9.1, 9.2 & 10.1, 10.2)
Heke ha e arabele li-remote kapa mohloli ofe kapa ofe oa lehae.	Sheba LCD bakeng sa boemo ba Kenyeletso (sheba leqephe le fetileng). Haeba tlhahiso efe kapa efe e kentswe tshebetsong mme e tshwarwa e sebetsa, karete e ke ke ya arabela taelo efe kapa efe e nngwe.

Lisebelisoa

• Libetri tsa bekapo le tjhaja ea betri
  Karete ea taolo e na le tjhaja e hahelletsoeng bakeng sa libeteri tsa bekapo. Hokela libetri ho theminale ea betri feela 'me tjhaja e tla tjhaja betri ka bo yona. Elsema e na le mefuta e mengata ea boholo ba betri.
• Lisebelisoa tsa Solar
  Elsema e na le lisebelisoa tsa taolo ea liheke tsa letsatsi, liphanele tsa letsatsi, lijaja tsa letsatsi le basebelisi ba liheke tse felletseng tsa letsatsi.
• TLHOKOMELO
  Ho sebelisa karete ea taolo ts'ebetsong ea letsatsi o tlameha ho seta molumo o nepahetsengtage kenya ho Tools Menu (16.2). Sena se tla tima "automatic vol".tage sensing e ka bakang mathata lits'ebetsong tsa letsatsi.
• Li-Inductive Loops le Li-Loop Detector tse entsoeng esale pele
  Elsema e na le mefuta e mengata ea li-loops tsa Saw-Cut le Direct Burial. Li entsoe esale pele ka boholo bo khothalelitsoeng ba loop bakeng sa lits'ebetso tsa khoebo kapa tsa lapeng mme li etsa hore ho kenngoe kapele le ho be bonolo.
• Wireless Bump Strip
  Sebaka sa tšireletso se kentsoeng keiting e tsamaeang kapa mokoallo hammoho le transmitter. Ha heke e otla tšitiso, mochine o fetisang molaetsa o fetisetsa lets'oao la mohala ho moamoheli ho emisa heke ho baka tšenyo e eketsehileng.

Key ring Litlhaloso
Li-remote tsa morao-rao tsa PentaFOB® li netefatsa hore liheke kapa mamati a hau a sireletsehile. Etela www.elsema.com bakeng sa lintlha tse ling. Lenaneo la PentaFOB®
Eketsa, fetola, 'me u hlakole lirimoutu tsa PentaFOB® memoring ea moamoheli. Moamoheli a ka boela a sireletsoa ka password hore a se ke a kena ka ntle ho tumello. Mabone a Khanyang
Elsema e na le mabone a 'maloa a benyang ho sebetsa joalo ka temoso ha heke kapa mamati a sebetsa.

Litaelo tsa Lenaneo la PentaFOB®

1. Tobetsa 'me u tšoare konopo ea lenaneo ho moamoheli o hahelletsoeng (Sheba setšoantšo sa khokahano ea MC)
2. Tobetsa konopo ea remoutu bakeng sa metsotsoana e 2 ha u ntse u tšoere konopo ea lenaneo ho moamoheli
3. Receiver LED e tla benya ebe e fetola Botala
4. Tlosa konopo ho moamoheli
5. Tobetsa konopo ea remote control ho leka tlhahiso ea moamoheli

Ho Hlakola Memori ea Baamoheli
Khutlisa li-pin tsa "Code Reset" ho moamoheli bakeng sa metsotsoana e 10. Sena se tla hlakola li-remoutu tsohle memoring ea moamoheli.

Lenaneo la PentaFOB®
Lenaneo lena le u lumella ho kenya le ho hlakola li-remoutu tse itseng memoring ea moamoheli. Sena se sebelisoa ha remote control e lahlehile kapa mohiri a tloha sebakeng seo 'me mong'a ntlo a batla ho thibela ho kena ntle le tumello.

PentaFOB® Backup Chips
Chip ena e sebelisetsoa ho boloka kapa ho khutlisetsa litaba tsa moamoheli. Ha ho e-na le li-remoutu tse 100 tse hlophisitsoeng ho moamoheli, ka tloaelo sesebelisoa se boloka memori ea moamoheli haeba moamoheli a ka senyeha.

ELSEMA PTY LTD
31 Tarlington Place Smithfield, NSW 2164
Australia

Litokomane / Lisebelisoa

ELSEMA MC-Molaoli oa Heke e le Mong a le Mong Habeli le a le Mong [pdf] Buka ea Taelo MC-Double, MC-Single, MC-Single Gate Controller le Single Gate, MC-Molaoli a le Mong, Taolo ea Keiti e le 'Ngoe, Molaoli oa Heke e le Mong, Molaoli oa Heke, Molaoli

Litšupiso

• Bukana ea Mosebelisi