ALPHA DATA ADM-PCIE-9H3 Karete ea Ts'ebetso e Phahameng ea FPGA
Selelekela
ADM-PCIE-9H3 ke karete ea k'homphieutha e sebetsang hantle hape e reretsoeng lits'ebetso tsa Setsi sa Boitsebiso, e nang le Xilinx Virtex UltraScale+ Plus FPGA e nang le Memory e Phahameng ea Bandwidth (HBM).
Likarolo tsa Bohlokoa
- PCIe Gen1/2/3 x1/2/4/8/16 capable
- Tlhophiso e sa sebetseng le e sebetsang ea taolo ea mocheso
- 1/2 bolelele, pro e tlasefile, x16 edge PCIe form factor
- 8GB HBM ea memori ea on-die e khonang ho 460GB/s
- K'hase e le 'ngoe ea QSFP-DD e khonang ho boloka data ho fihla ho 28 Gbps ka likanale tse 8 (224 Gbps)
- Lihokelo tse 'ngoe tsa 8 lane Ultraport SlimSAS tse lumellanang le OpenCAPI ebile li loketse katoloso ea IO.
- E ts'ehetsa VU33P kapa VU35P Virtex UltraScale+ FPGAs
- Karolo e ka pele le e ka morao ea JTAG fihlella ka koung ea USB
- FPGA e ka hlophisoa ho feta USB/JTAG le SPI configuration flash
- Moqtage, hona joale, le tlhokomelo mocheso
- Matshwao a 8 a GPIO le kenyeletso e le 1 e ikhethileng ya nako
Khoutu ea Odara
ADM-PCIE-9H3
ADM-PCIE-9H3/NF (ntle le sefene sa boikhethelo)
Bona http://www.alpha-data.com/pdfs/adm-pcie-9h3.pdf bakeng sa likhetho tse felletseng tsa ho odara.
Boitsebiso ba boto
Litlhaloso tsa 'Mele
ADM-PCIE-9H3 e lumellana le PCI Express CEM revision 3.0.
Letlapa la 1 : Mechanical Dimensions (Inc. Front Panel)
| Tlhaloso | Lekanya |
| Kakaretso ea Dy | 80.1 limilimithara |
| Kakaretso ea Dx | 181.5 limilimithara |
| Kakaretso ea Dz | 19.7 limilimithara |
| Boima ba 'mele | 350 dikgerama |
Litlhoko tsa Chassis
PCI Express
ADM-PCIE-9H3 e khona ho etsa PCIe Gen 1/2/3 ka litselana tse 1/2/4/8/16, e sebelisa Xilinx Integrated Block bakeng sa PCI Express.
Litlhoko tsa Mechini
Hoa hlokahala slot ea 'mele ea 16-lane PCIe bakeng sa ho tsamaellana le mochini.
Litlhoko tsa Matla
ADM-PCIE-9H3 e hula matla ohle ho tsoa ho PCIe Edge. Ho latela litlhaloso tsa PCIe, sena se fokotsa tšebeliso ea matla ea karete ho fihla ho 75W.
Khakanyo ea tšebeliso ea matla e hloka hore ho sebelisoe sesepa sa Xilinx XPE le sesebelisoa sa ho lekanya matla se fumanehang ho Alpha Data. Ka kopo ikopanye le support@alpha-data.com ho fumana sesebelisoa sena.
Matla a fumanehang liporong tse baloang ho sebelisoa XPE ke a latelang:
Letlapa la 2 : Matla a teng ka Terene
| Moqtage | Lebitso la Mohloli | Bokhoni ba Hona Joale |
| 0.72-0.90 | VCC_INT + VCCINT_IO + VCC_BRM | 42A |
| 0.9 | MGTAVCC | 5A |
| 1.2 | MGTAVTT | 9A |
| 1.2 | VCC_HBM * VCC_IO_HBM | 14A |
| 1.8 | VCCAUX + VCAUX_IO + VCO_1.8V | 1.5A |
| 1.8 | MGVCCAUX | 0.5A |
| 2.5 | VCAUX_HBM | 2.2A |
| 3.3 | 3.3V bakeng sa Optics | 3.6A |
Ts'ebetso ea Mocheso
Haeba mocheso oa mantlha oa FPGA o feta likhato tse 105 tsa Celsius, moralo oa FPGA o tla hlakoloa ho thibela karete ho futhumala ho feta tekano.
ADM-PCIE-9H3 e tla le sekoti sa mocheso ho fokotsa mocheso oa FPGA, eo hangata e leng sebaka se chesang ka ho fetisisa kareteng. Mocheso oa mocheso oa FPGA o tlameha ho lula ka tlase ho likhato tse 100 tsa Celsius. Ho bala mocheso oa mocheso oa FPGA, nka matla a kopo ea hau, u atise ka Theta JA ho tsoa tafoleng e ka tlase, 'me u kenye mocheso oa hau oa kahare oa sistimi. Kerafo e ka tlaase e bontša mela e ’meli, e ’ngoe e ile ea lekoa ka har’a kotopo e kentsoeng likobo, ’me e ’ngoe e ile ea lekoa ntle le likobo. Ts'ebetso ka kakaretso e betere ntle le li-shrouds, empa li fana ka ts'ebetso e ntlafalitsoeng le ho fokotsa phepelo ea moea ho li-server tse kopaneng. Sekoahelo se ka tlosoa ho sebelisoa mokhanni oa 1/16 ″ hex. Haeba u sebelisa fan e fanoeng ka boto, u tla fumana theta JA e ka ba 1.43 degC/W bakeng sa boto e ntseng e le moeeng e kentsoeng kapa ntle le eona.
Phallo ea matla e ka hakanngoa ka ho sebelisa tekanyetso ea matla ea Alpha Data hammoho le Xilinx Power Estimator (XPE) e jarollotsoeng ho. http://www.xilinx.com/products/technology/power/xpe.html. Khoasolla
sesebelisoa sa UltraScale mme o sete sesebelisoa ho Virtex UltraScale+, VU33P, FSVH2104, -2, -2L, kapa -3, e atolositsoe. Beha mocheso oa tikoloho sebakeng sa hau sa sistimi ebe u khetha 'mosebelisi ho feta' bakeng sa theta e sebetsang ea JA ebe o kenya setšoantšo se amanang le sistimi ea hau ea LFM lebaleng le se nang letho. Tsoela pele ho kenya likarolo tsohle tsa moralo le ts'ebeliso ho li-tab tse latelang tsa spreadsheet. Ka mor'a moo, fumana tekanyo ea matla ea 9H3 ho Alpha Data ka ho iteanya
support@alpha-data.com. Joale o tla hokela lipalo tsa matla tsa FPGA hammoho le lipalo tsa Optical module ho fumana khakanyo ea boemo ba boto.
Tsamaiso e sebetsang ea VS Passive Thermal
Likepe tsa ADM-PCIE-9H3 tse nang le moea o monyane oa boikhethelo bakeng sa ho pholisa ka mafolofolo lits'ebetsong tse nang le moea o fokolang. Haeba ADM-PCIE-9H3 e tla kenngoa ho seva e nang le moea o laoloang, khetho ea taelo / NF e ka sebelisoa ho amohela likarete ntle le sengoathoana sena se eketsehileng. Balateli ba na le nako e khuts'oane haholo lipakeng tsa ho hloleha (MTBF) ho feta kopano eohle, kahoo likarete tse sa sebetseng li na le tebello e telele ea bophelo pele li hloka tlhokomelo. ADM-PCIE-9H3 e boetse e kenyelletsa taolo ea lebelo la fan, e lumellang lebelo le fapaneng la fan le ipapisitseng le mocheso oa lefu, le
ho lemoha ha fan e hlōlehileng (sheba karolo ea Balaoli ba Fan).
Litloaelo
Alpha Data e fana ka likhetho tse ngata tsa ho itlhophisa ho lihlahisoa tse seng li le teng tsa khoebo (COTS).
Likhetho tse ling li kenyelletsa, empa ha li felle feela ho: li-cages tse eketsehileng tsa marang-rang libakeng tse haufi kapa pro e felletsengfile, lisinki tse matlafalitsoeng tsa mocheso, li-baffles, le litlatsetso tsa potoloho.
Ka kopo ikopanye sales@alpha-data.com ho fumana quote le ho qala morero oa hau kajeno.
Tlhaloso ea Ts'ebetso
Fetileview
ADM-PCIE-9H3 ke sethala se feto-fetohang sa komporo se nang le Virtex UltraScale+ VU33P/VU35P FPGA, sebopeho sa Gen3x16 PCIe, 8GB ea memori ea HBM, cage e le 'ngoe ea QSFP-DD, sehokelo sa OpenCAPI se lumellanang le Ultraport SlimSAS se khonang ho sebelisa, kenyeletso e ikhethileng bakeng sa pulse ea khokahano ea nako, hlooho ea li-pin tse 28 bakeng sa ts'ebeliso e akaretsang (oache, lithapo tsa taolo, debug, joalo-joalo), li-LED tsa phanele e ka pele, le sebali se matla sa sistimi.
Liphetoho
ADM-PCIE-9H3 e na le switch ea octal DIP SW1, e ka lehlakoreng le ka morao la boto. Mosebetsi oa switjha ka 'ngoe ho SW1 o hlalositsoe ka botlalo ka tlase:
Lethathamo la 3 : Fetola Mesebetsi
| Fetoha | Feme ea kamehla | Mosebetsi | OFF State | ON State |
| LITLHAKU TSE KHOLO | TLOA | Switch ea mosebelisi 0 | Pin AW33 = '1' | Pin BF52 = '0' |
| LITLHAKU TSE KHOLO | TLOA | Switch ea mosebelisi 1 | Pin AY36 = '1' | Pin BF47 = '0' |
| LITLHAKU TSE KHOLO | TLOA | Reserved | Reserved | Reserved |
| LITLHAKU TSE KHOLO | TLOA | Matla Off | Boto e tla matlafatsa | Tlosa hanghang |
| LITLHAKU TSE KHOLO | TLOA | Mokhoa oa Ts'ebeletso | Ts'ebetso ea Kamehla | Mokhoa oa ts'ebeletso ea ntlafatso ea firmware |
| LITLHAKU TSE KHOLO | ON | HOST_I2 C_EN | Sysmon holim'a PCIe I2C | Sysmon e arotsoe |
| LITLHAKU TSE KHOLO | ON | CAPI_VP D_EN | OpenCAPI VPD e fumaneha | OpenCAPI VPD e arohane |
| LITLHAKU TSE KHOLO | ON | CAPI_VP D_WP | CAPI VPD e sirelelitsoe ka mongolo | CAPI VPD ea ngoloa |
Sebelisa "LVCMOS18" e tloaelehileng ea IO ha u qobella li-switches tsa mosebelisi.
Li-LED
Ho na le li-LED tse 7 ho ADM-PCIE-9H3, 4 ea tsona e le sepheo se akaretsang le seo moelelo oa sona o ka hlalosoang ke mosebedisi. Tse ling tse 3 li na le mesebetsi e tsitsitseng e hlalositsoeng ka tlase:
Lethathamo la 4 : Lintlha tsa LED
| Comp. Ref. | Mosebetsi | ON State | OFF State |
| D1 | LED_G1 | Mosebelisi o hlalositsoe '0' | Mosebelisi o hlalositsoe '1' |
| D3 | LED_A1 | Mosebelisi o hlalositsoe '0' | Mosebelisi o hlalositsoe '1' |
| D4 | QETILE | FPGA e hlophisitsoe | FPGA ha e ea hlophisoa |
| D5 | Boemo ba 1 | Bona Boemo ba LED Litlhaloso | |
| D6 | Boemo ba 0 | Bona Boemo ba LED Litlhaloso | |
| D7 | LED_A0 | Mosebelisi o hlalositsoe '0' | Mosebelisi o hlalositsoe '1' |
| D9 | LED_G0 | Mosebelisi o hlalositsoe '0' | Mosebelisi o hlalositsoe '1' |
Sheba Karolo e Felletseng ea Pinout Tafole bakeng sa lenane le felletseng la linete le liphini tsa LED tse laoloang ke basebelisi
Tsupa nako
ADM-PCIE-9H3 e fana ka tharollo ea oache e feto-fetohang bakeng sa li-transceiver quads tse ngata tsa gigabit le lesela la FPGA. Oache efe kapa efe e tsoang ho Si5338 Clock Synthesizer e ka lokisoa bocha ho tsoa phanele e ka pele ea USB USB Interface kapa boema-kepe ba Alpha Data sysmon FPGA. Sena se lumella mosebelisi ho hlophisa hoo e batlang e le maqhubu afe kapa afe a sa reroang a oache nakong ea ts'ebetso ea ts'ebeliso. Nako e phahameng ea nako ea oache ke 312.5MHz.
Ho boetse ho na le Si5328 jitter attenuator e fumanehang. Sena se ka fana ka lioache tse hloekileng le tse lumellanang libakeng tsa quad tsa QSFP-DD le OpenCAPI (SlimSAS) ka maqhubu a mangata a oache. Lisebelisoa tsena li sebelisa mohopolo o sa tsitsang, kahoo moralo oa FPGA o tla hloka ho hlophisa hape 'mapa oa ngoliso kamora ketsahalo efe kapa efe ea potoloho ea matla.
Mabitso ohle a lioache karolong e ka tlase a ka fumanoa ho Lethathamo le Feletseng la Pinout.
Si5328
Haeba jitter attenuation e hlokahala, ka kopo bona litokomane tsa litšupiso tsa Si5328.
https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5328.pdf
Seipone sa likhokahano tsa potoloho Xilinx VCU110 le VCU108, ka kopo bona Xilinx Dev Boards bakeng sa litšupiso.
Lioache tsa Reference PCIe
Litsela tse 16 tsa MGT tse hokahaneng le moeli oa karete ea PCIe li sebelisa lithaele tsa MGT 224 ho isa ho 227 'me li sebelisa oache ea 100 MHz (lebitso la marang-rang PCIE_REFCLK).
Ntle le moo, oache e hloekileng ea 100MHz ea fumaneha hape (lebitso la marang-rang PCIE_LCL_REFCLK).
Lesela oache
Moralo ona o fana ka oache ea masela (lebitso la marang-rang FABRIC_SRC_CLK) e sa fetoheng ho 300 MHz. Oache ena e reretsoe ho sebelisoa bakeng sa likarolo tsa IDELAY meralong ea FPGA. Oache ea masela e hokahane le phini ea Global Clock (GC).
DIFF_TERM_ADV = TERM_100 ea hlokahala hore LVDS e felisoe
Oache e thusang
Moralo ona o fana ka oache e thusang (lebitso la marang-rang AUX_CLK) e sa fetoheng ho 300 MHz. Oache ena e ka sebelisoa molemong ofe kapa ofe 'me e hoketsoe ho phini ea Global Clock (GC).
DIFF_TERM_ADV = TERM_100 ea hlokahala hore LVDS e felisoe
Oache ea Lenaneo (EMCCLK)
Oache ea 100MHz (lebitso la marang-rang EMCCLK_B) e kenngoa pineng ea EMCCLK ho khanna sesebelisoa sa flash sa SPI nakong ea tlhophiso ea FPGA. Hlokomela hore sena ha se phini ea IO ea lefats'e ea lefatše.
QSFP-DD
QSFP-DD cage e fumaneha ka har'a lithaele tsa MGT 126 le 127 mme e sebelisa oache ea kamehla ea 161.1328125MHz.
Hlokomela hore maqhubu ana a oache a ka fetoleloa ho maqhubu afe kapa afe a sa reroang a oache ho fihla ho 312MHz ka ho hlophisa bocha Si5338 oscillator ea oache e hlophisitsoeng ka mokhoa oa ho hlahloba sistimi. Sena se ka etsoa ho sebelisoa Alpha Data API kapa ka USB ka lisebelisoa tse nepahetseng tsa Alpha Data Software.
Sheba mabitso a marang-rang QSFP_CLK* bakeng sa libaka tsa phini.
QSFP-DD cage e boetse e fumaneha hoo e ka koaloang ho tloha ho Si5328 jitter attenuator clock multiplier.
Sheba mabitso a marang-rang SI5328_OUT_1* bakeng sa libaka tsa phini.
Ultraport SlimSAS (OpenCAPI)
Sehokelo sa Ultraport SlimSAS se fumaneha ho MGT tile 124 le 125.
Bakeng sa OpenCAPI ho fanoa ka oache ea kantle ea 156.25MHz holim'a thapo. Sheba mabitso a marang-rang CAPI_CLK_0* bakeng sa libaka tsa phini ea oache.
Mohloli o mong oa oache bakeng sa sebopeho sena ke Si5338 clock synthesizer e sa fetoheng ho 161.1328125MHz. Sheba mabitso a marang-rang CAPI_CLK_1* bakeng sa libaka tsa phini. Hlokomela hore maqhubu ana a oache a ka fetoleloa ho maqhubu afe kapa afe a sa lebelloang a oache ho fihla ho 312MHz ka ho hlophisa bocha Si5338 oscillator ea oache e hlophisitsoeng ka mokhoa oa ho hlahloba sistimi. Sena se ka etsoa ho sebelisoa Alpha Data API kapa ka USB ka lisebelisoa tse nepahetseng tsa Alpha Data Software.
Bakeng sa lits'ebetso tsa jitter sensitive, sebopeho sena se ka koaloa ho tloha ho Si5328 jitter attenuator. Sheba mabitso a marang-rang SI5328_OUT_0* bakeng sa libaka tsa phini.
PCI Express
ADM-PCIE-9H3 e khona ho etsa PCIe Gen 1/2/3 ka litselana tse 1/2/4/8/16. FPGA e khanna litsela tsena ka kotloloho e sebelisa block e Integrated PCI Express ho tloha Xilinx. Puisano ea lebelo la sehokelo sa PCIe le palo ea litselana tse sebelisoang hangata lia ikemela 'me ha li hloke ho kenella ha basebelisi.
PCI Express reset (PERST#) e hokahantsoeng le FPGA libakeng tse peli. Sheba Matshwao a Felletseng a Tafole ya Pinout PERST0_1V8_L le PERST1_1V8_L.
Mesebetsi e meng ea phini bakeng sa litselana tsa lebelo le phahameng li fanoe ka pinout e khomaretsoeng ho Complete Pinout Tafole.
Litlhaloso tsa PCI Express li hloka hore likarete tsohle tse kenyelletsoeng li be li loketse ho baloa ka hare ho 120ms ka mor'a hore matla a sebetse (100ms ka mor'a hore matla a sebetse + 20ms ka mor'a hore PERST e lokolloe). ADM-PCIE-9H3 e fihlela tlhokahalo ena ha e hlophisitsoe ho tsoa ho "tandem bitstream" e nang le litšitiso tse nepahetseng tsa SPI tse hlalositsoeng karolong ena:
Tlhophiso e Tsoang ho Memori ea Flash. Bakeng sa lintlha tse ling mabapi le tlhophiso ea tandem, bona Xilinx xapp 1179.
Hlokomela:
Liboto tse fapaneng tsa bo-'mè / li-backplanes li tla rua molemo mererong e fapaneng ea ho lekana ha RX ka har'a PCIe IP ea mantlha e fanoeng ke Xilinx. Alpha Data e khothaletsa ho sebelisa litlhophiso tse latelang haeba mosebelisi a e-na le mathata a hokahanyang liphoso kapa mathata a koetliso le sistimi ea bona: ka har'a jenereithara ea mantlha ea IP, fetola mokhoa ho "Advanced" 'me u bule "GT Settings" tab, fetola "form factor driven installer loss". tokiso" ho tloha ho "Add-in Card" ho "Chip-to-Chip" (Sheba Xilinx PG239 bakeng sa lintlha tse ling).
QSFP-DD
Lehae le le leng la QSFP-DD le fumaneha phanele e ka pele. Lehare lena le khona ho kenya likhoele tsa QSFP28 kapa QSFP-DD (tse ka morao tse lumellanang). Ka bobeli mefuta e sebetsang ea optical le passive copper QSFP-DD/QSFP28 e lumellana ka botlalo. Khokahano ea puisano e ka sebetsa ho fihla ho 28Gbps ka mocha. Ho na le likanale tse 8 ho pholletsa le lesaka la QSFP-DD (kakaretso ea boholo ba bandwidth ea 224Gbps). Cage ena e loketse hantle bakeng sa 8x 10G/25G, 2x 100G Ethernet, kapa protocol efe kapa efe e tšehetsoeng ke Xilinx GTY Transceivers. Ka kopo bona Xilinx User Guide UG578 bakeng sa lintlha tse ling mabapi le bokhoni ba li-transceivers.
QSFP-DD cage e na le matšoao a taolo a amanang le FPGA. Khokahano e hlalositsoe ka botlalo ho Lethathamo le Feletseng la Pinout qetellong ea tokomane ena. Note e sebelisitsoeng likabelong tsa phini ke QSFP* e nang le libaka tse hlakisitsoeng setšoantšong se ka tlase.
Sebelisa liphini tsa QSFP_SCL_1V8 le QSFP_SDA_1V8 joalo ka ha ho hlalositsoe ho Complete Pinout Table ho buisana le sebaka sa ho ingolisa sa QSFP28.
Hlokomela:
LP_MODE (Mokhoa o Motla oa Matla) ho cage e tlameletsoe fatše, sebelisa sebopeho sa tsamaiso ho beha melao ea matla.
Hoa khoneha hore Alpha Data e kenelle pele ADM-PCIE-9H3 ka likarolo tsa QSFP-DD le QSFP28. Tafole e ka tlase e bonts'a nomoro ea karolo bakeng sa li-transceivers tse kentsoeng ha li laeloa le boto ena.
Lethathamo la 5 : QSFP28 Karolo ea Linomoro
| Khoutu ea Odara | Tlhaloso | Nomoro ea Karolo | Moetsi |
| Q10 | 40G (4×10) QSFP Optical Transceiver | Tlhaloso: FTL410QE2C | Finisar |
| Q14 | 56G (4×14) QSFP Optical Transceiver | Setšoantšo sa FTL414QB2C | Finisar |
| Q25 | 100G (4×25) QSFP28 Optical Transceiver | FTLC9558REPM | Finisar |
OpenCAPI Ultraport SlimSAS
Lisebelisoa tsa Ultraport SlimSAS tse ka morao ho boto li lumella li-interfaces tse lumellanang le OpenCAPI tse sebetsang ho 200G (liteishene tse 8 ho 25G). Ka kopo ikopanye le support@alpha-data.com kapa moemeli oa hau oa IBM bakeng sa lintlha tse ling ka OpenCAPI le melemo ea eona.
Sehokelo sa SlimSAS se ka boela sa sebelisoa ho hokahanya boto e eketsehileng ea 2x QSFP28, ho ikopanya. sales@alpha-data.com bakeng sa lintlha tse ling. Ntle le moo, cabling cab e ka sebelisoa ho hokahanya likarete tse ngata tsa ADM-PCIE-9H3 ka har'a chassis.
Tsamaiso ea Tsamaiso
ADM-PCIE-9H3 e na le bokhoni ba ho hlokomela mocheso, voltage, le hona joale ea tsamaiso ho hlahloba tshebetso ya boto. Tlhokomelo e sebelisoa ho sebelisoa microcontroller ea Atmel AVR.
Haeba mocheso oa mantlha oa FPGA o feta likhato tse 105 tsa Celsius, FPGA e tla hlakoloa ho thibela tšenyo ea karete.
Laola li-algorithms ka har'a microcontroller ka bohona hlahloba mohala oa voltages le lithempereichara tsa boto le likarolo li etsa hore tlhahisoleseling e fumanehe ho FPGA holim'a sehokelo se inehetseng sa serial se hahiloeng ka har'a sephutheloana sa moralo oa litšupiso tsa Alpha Data (e rekisoang ka thoko). Tlhahisoleseling e ka fumaneha ka kotloloho ho tsoa ho microcontroller holim'a sebopeho sa USB phanele e ka pele kapa ka sebopeho sa IPMI se fumanehang moeling oa karete ea PCIe.
Lethathamo la 6: Moqtage, Lihlahlobi tsa Hona Joale, le Mocheso
| Bahlahlobisisi | Index | Morero/Tlhaloso |
| ETC | ETC | Khaontara ea nako e fetileng (metsotsoana) |
| EC | EC | K'hamera ea liketsahalo (lipotoloho tsa matla) |
| 12V | ADC00 | Phepelo ea ho kenya letsoho |
| 12V_I | ADC01 | 12V e kenang hona joale amps |
| 3.3V | ADC02 | Phepelo ea ho kenya letsoho |
| 3.3V_I | ADC03 | 3.3V e kenang hona joale amps |
| 3.3V | ADC05 | Matla a thusang a boto |
| 3.3V | ADC05 | 3.3V bakeng sa lisebelisoa tsa mahlo tsa QSFP |
| 2.5V | ADC06 | Oache le DRAM voltage phepelo |
| 1.8V | ADC07 | FPGA IO voltage (VCO) |
| 1.8V | ADC08 | Matla a transceiver (AVCC_AUX) |
| 1.2V | ADC09 | Matla a HBM |
| 1.2V | ADC10 | Matla a Transceiver (AVTT) |
| 0.9V | ADC11 | Matla a Transceiver (AVCC) |
| 0.85-0.90V | ADC12 | BRAM + INT_IO (VccINT_IO) |
| 0.72-0.90V | ADC13 | FPGA Core Supply (VccINT) |
| uC_Temp | TMP00 | FPGA on-die mocheso |
| Board0_Temp | TMP01 | Mocheso oa boto haufi le phanele e ka pele |
| Board1_Temp | TMP02 | Mocheso oa boto haufi le sekhutlo se ka holimo |
| FPGA_Temp | TMP03 | FPGA on-die mocheso |
Li-LED tsa Boemo ba Tsamaiso ea Tsamaiso
Li-LED tsa D5 (Red) le D6 (Tala) li bontša boemo ba bophelo ba karete.
Letlapa la 7 : Litlhaloso tsa Boemo ba LED
| Li-LED | Boemo |
| Botala | Ho matha mme ha ho na lialamo |
| Botala + Bokhubelu | Standby (E tima) |
| Botala bo Benyang + Bofubelu bo Benyang (hammoho) | Tlhokomeliso – alamo ea bohlokoa e sebetsa |
| Botala bo Benyang + Bokhubelu bo Benyang (ho fapanyetsana) | Mokhoa oa Ts'ebeletso |
| Botala bo Benyang + Bokhubelu | Tlhokomeliso – alamo e sebetsa |
| Khubedu | Sesebelisoa sa firmware se sieo kapa firmware e sa sebetseng |
| Bofubelu bo benyang | FPGA tlhophiso e hlakotsoe ho sireletsa boto |
Balaoli ba Fane
Bese ea USB e ka har'a sekepe e laoloang ke sebali sa sistimi e na le phihlello ea molaoli oa fan oa MAX6620. Sesebelisoa sena se ka laoloa ka li-interface tse ngata tsa onboard system monitor network, ho kenyeletsoa USB, PCIe Edge SMBUS, le FPGA sysmon seral communication port. Selaoli sa fan se ho I2C bese 1 atereseng ea 0x2a. Bakeng sa lipotso tse ling. Ikopanye support@alpha-data.com ka lipotso tse eketsehileng mabapi le ho sebelisa li-controller tsena.
Sesebelisoa sa USB
FPGA e ka hlophisoa ka kotloloho ho tsoa khokahanong ea USB ho phanele e ka pele kapa moeling oa karete e ka morao.
ADM-PCIE-9H3 e sebelisa Digilent USB-JTAG lebokose la converter le tšehetsoang ke Xilinx software tool suite. Hokela habonolo thapo ea mofuta oa micro-USB AB lipakeng tsa boema-kepe ba USB ba ADM-PCIE-9H3 le komporo e amohelang e kentsoeng Vivado. Vivado Hardware Manager o tla lemoha FPGA ka bo eona 'me a u lumelle ho lokisa FPGA le PROM ea SBPI ea tlhophiso.
Sehokelo se tšoanang sa USB se sebelisoa ho fihlella ka kotloloho sistimi ea ho beha leihlo. Tsohle voltages, maqhubu, mocheso, le litlhophiso tsa tlhophiso ea lioache tse sa fetoheng li ka fumaneha ho sebelisoa software ea Alpha Data's avr2util sehokelo sena.
Avr2util ea Windows le mokhanni oa USB ea amanang le eona e ka jarolleloa mona:
https://support.alpha-data.com/pub/firmware/utilities/windows/
Avr2util bakeng sa Linux e ka jarolleloa mona:
https://support.alpha-data.com/pub/firmware/utilities/linux/
Sebelisa "avr2util.exe /?" ho bona likhetho tsohle.
Bakeng sa mohlalaample "avr2util.exe /usbcom com4 display-sensors" e tla bonts'a boleng bohle ba sensor.
Bakeng sa mohlalaample "avr2util.exe /usbcom com4 setclknv 1 156250000" e tla beha oache ea QSFP ho 156.25MHz. setclk index 0 = CAPI_CLK_1, index 1 = QSFP_CLK, index 2 = AUX_CLK, index 3 = FABRIC_CLK.
Fetola 'com4' ho tsamaisana le nomoro ea boema-kepe ea com e fanoeng tlas'a windows molaoli oa sesebelisoa
Tlhophiso
Ho na le mekhoa e 'meli ea mantlha ea ho hlophisa FPGA ho ADM-PCIE-9H3:
- Ho tsoa mohopolong oa Flash, ha o sebelisa matla, joalo ka ha ho hlalositsoe Karolong ea 3.8.1
- Ho sebelisa thapo ea USB e hoketsoeng boema-kepeng ba USB Karolo ea 3.8.2
Tlhophiso e Tsoang ho Memori ea Flash
FPGA e ka hlophisoa ka bo eona ka matla ho tsoa ho lisebelisoa tse peli tsa memori ea 256 Mbit QSPI e hlophisitsoeng joalo ka sesebelisoa sa x8 SPI (nomoro ea karolo ea Micron MT25QU256ABA8E12-0). Lisebelisoa tsena tsa flash hangata li arotsoe ka libaka tse peli tsa 32 MiByte e 'ngoe le e' ngoe, moo sebaka se seng le se seng se leng seholo ka ho lekaneng ho tšoara bitstream e sa hatelloang bakeng sa VU33P FPGA.
ADM-PCIE-9H3 e romelloa ka PCIe endpoint bitstream e bonolo e nang le alpha Data ADXDMA bitstream ea mantlha. Lintlha tsa Alpha li ka kenya li-bitstreams tse ling nakong ea tlhahlobo ea tlhahiso, ka kopo ikopanye sales@alpha-data.com bakeng sa lintlha tse ling.
Hoa khoneha ho sebelisa Multiboot ka setšoantšo se ka morao ho hardware ena. Sebopeho sa tlhophiso ea SPI e kholo le Fallback MultiBoot li tšohloa ka botlalo ho Xilinx UG570. Ha e sebetsa, FPGA e leka ho itlhophisa ka boyona ka mokhoa oa serial master ho ipapisitse le litaba tsa sehlooho lenaneong. file. Multibook le ICAP li ka sebelisoa ho khethoa lipakeng tsa libaka tse peli tsa tlhophiso tse tla kenngoa ho FPGA. Sheba Xilinx UG570 MultiBoot bakeng sa lintlha.
Setšoantšo se laetsoeng se ka boela sa tšehetsa tandem PROM kapa tandem PCIE ka mekhoa ea tlhophiso ea ntlafatso ea tšimo.
Likhetho tsena li fokotsa linako tsa ho kenya matla ho thusa ho fihlela litlhoko tsa nako ea ho seta bocha PCIe. Tandem e nang le tšimo e boetse e thusa sistimi ea moamoheli ho lokisa mohopolo oa mosebelisi oa FPGA ntle le ho lahleheloa ke sehokelo sa PCIe, e leng tšobotsi e sebetsang ha sistimi e qala hape le lipotoloho tsa matla e se khetho.
Alpha Data System Monitor e boetse e khona ho hlophisa memori ea flash hape le ho hlophisa FPGA bocha.
Sena se fana ka mokhoa o sebetsang o sa sireletsehang oa ho hlophisa FPGA hape leha e ka theoha bese ea PCIe. Sesebelisoa sa sistimi se ka fihlelleha ka USB karolong e ka pele le pheletsong e ka morao, kapa holim'a likhokahano tsa SMBUS pheletsong ea PCIe.
Lits'oants'o tsa Tlhophiso ea Mohaho le Lenaneo
Hlahisa hanyanefile ka litšitiso tsena (bona xapp1233):
- set_property BITSTREAM.GENERAL.COMPRESS TRUE [ jwale_design ]
- set_property BITSTREAM.CONFIG.EXTMASTERCCLK_EN {DIV-1} [current_design]
- set_property BITSTREAM.CONFIG.SPI_32BIT_ADDR YES [current_design]
- set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 8 [hajoale_moqapi]
- set_property BITSTREAM.CONFIG.SPI_FALL_EDGE YES [moqapi_oa_joale]
- set_property BITSTREAM.CONFIG.UNUSEDPIN {Pullnone} [current_design]
- set_property CFGBVS GND [ current_design ]
- set_property CONFIG_VOLTAGE 1.8 [ moetso_ oa hajoale ]
- set_property BITSTREAM.CONFIG.OVERTEMPSHUTDOWN Thusa [current_design]
Hlahisa MCS file ka thepa ena (write_cfgmem):
- - sebopeho sa MCS
- - boholo ba 64
- - sehokelo SPIx8
- -loadbit "ho fihlela 0x0000000file/filename.bit>” (sebaka sa 0th)
- -loadbit "ho fihlela 0x2000000file/filename.bit>” (Sebaka sa pele, boikhethelo)
Lenaneo le nang le mookameli oa lisebelisoa tsa vivado ka litlhophiso tsena (bona xapp1233):
- SPI part: mt25qu256-spi-x1_x2_x4_x8
- Boemo ba li-non-config mem I/O pins: Hula-ha ho letho
- Lebisa ba bane files e hlahisitsoeng ho tsoa ho write_cfgmem tcl taelo.
Tlhophiso ka JTAG
Mohala o monyane oa USB AB o ka hokelloa phanele e ka pele kapa koung ea USB e ka morao. Sena se lumella FPGA hore e lokisoe bocha ho sebelisoa Xilinx Vivado Hardware Manager ka Digilent J e kopaneng.TAG lebokose la converter. Sesebelisoa se tla tsejoa ka bohona ho Vivado Hardware Manager.
Bakeng sa litaelo tse qaqileng haholoanyane, ka kopo bona "Ho Sebelisa Vivado Hardware Manager ho Program FPGA Device" karolo ea Xilinx UG908: https://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_1/ug908-vivado-programming-debugging.pdf
GPIO Connector
Khetho ea GPIO e na le sehokelo se koahetsoeng ka mefuta e mengata se tsoang Molex se nang le karolo ea 87832-1222 e fang basebelisi ba nang le litlhoko tsa tloaelo tsa IO ho hokahana ka kotloloho le matšoao a FPGA.
Polaka e khothaletsoang ea ho nyalana: Molex 0875681273 kapa 0511101260
Direct Connect FPGA Lipontšo
Linete tse 8 li arotsoe ho hlooho ea GPIO, e le lihlopha tse 'nè tsa lipara tse fapaneng. Letšoao lena le loketse litekanyetso life kapa life tse tšehetsoeng tsa 1.8V tse tšehetsoeng ke meralo ea Xilinx UltraScale. Sheba Xilinx UG571 bakeng sa likhetho tsa IO.
LVDS le 1.8 CMOS ke likhetho tse tsebahalang. Lenane la matšoao la 0th GPIO le loketse khokahano ea oache ea lefats'e.
Lipontšo tse tobileng tsa GPIO li lekanyelitsoe ho 1.8V ka quickswitch (74CBTLVD3245PW) e le ho sireletsa FPGA ho overvolving.tage holim'a lithakhisa tsa IO. Quickswitch ena e lumella matšoao hore a tsamaee ka tsela efe kapa efe ka li-ohm tse 4 feela tsa letoto la impedance le ka tlase ho 1ns ea ho lieha ha phatlalatso. Linete li hokahane ka kotloloho le FPGA kamora ho switjha ka potlako.
Mabitso a mats'oao a khokahanyo ka kotloloho a ngotsoe GPIO_0_1V8_P/N le GPIO_1_1V8_P/N, joalo-joalo ho bontša polarity le lihlopha. Likabelo tsa phini tsa matšoao li ka fumanoa ho Complete Pinout Table
Kenyeletso ya Nako
J1.1 le J1.2 li ka sebelisoa e le lets'oao le ikhethileng la ho kenya nako (ho fihla ho 25MHz). Likopo li ka hokela ka kotloloho ho sehokelo sa GPIO, kapa Alpha Data e ka fana ka tharollo ea cable ka SMA kapa sehokelo se ts'oanang phanele e ka pele. Ikopanye le sales@alpha-data.com bakeng sa likhetho tsa sehokelo sa phanele e ka pele.
Bakeng sa libaka tsa phini, sheba lebitso la letšoao ISO_CLK ho Complete Pinout Tafole.
Letšoao le arotsoe ka karolo ea optical isolator ea nomoro ea TLP2367 e nang le 220 ohm ea letoto la ho hanyetsa.
Mosebelisi EEPROM
Mosebelisi oa 2Kb I2C EEPROM o fanoa bakeng sa ho boloka liaterese tsa MAC kapa lintlha tse ling tsa mosebelisi. EEPROM ke karolo ea nomoro ea CAT34C02HU4IGT4A
Aterese ea A2, A1, le A0 kaofela li tlameletsoe ho '0' e utloahalang.
Likabelo tsa ho ngola tšireletso (WP), Serial Clock (SCL), le Serial Data (SDA) li ka fumanoa ho Complete Pinout Tafole e nang le mabitso a SPARE_WP, SPARE_SCL, le SPARE_SDA ka ho latellana.
Lipontšo tsa WP, SDA, le SCL kaofela li na le lihanyetsi tsa kantle tse hulang kareteng.
Sehlomathiso A: Tafole e Feletseng ea Pinout
Letlapa la 8: Lethathamo le Feletseng la Pinout (e tsoela pele leqepheng le latelang)
| Nomoro ea Pin | Lebitso la Letshwao | Pin Lebitso | Banka Voltage |
| BC18 | AUX_CLK_PIN_N | IO_L11N_T1U_N9_GC_64 | 1.8 (LVCMOS18) |
| BB18 | AUX_CLK_PIN_P | IO_L11P_T1U_N8_GC_64 | 1.8 (LVCMOS18) |
| BF33 | AVR_B2U_1V8 | IO_L2P_T0L_N2_66 | 1.8 (LVCMOS18) |
| BF31 | AVR_HS_B2U_1V8 | IO_L1P_T0L_N0_DBC_66 | 1.8 (LVCMOS18) |
| BB33 | AVR_HS_CLK_1V8 | IO_L12N_T1U_N11_GC_66 | 1.8 (LVCMOS18) |
| BF32 | AVR_HS_U2B_1V8 | IO_L1N_T0L_N1_DBC_66 | 1.8 (LVCMOS18) |
| BA33 | AVR_MON_CLK_1V8 | IO_L12P_T1U_N10_GC_66 | 1.8 (LVCMOS18) |
| BF34 | AVR_U2B_1V8 | IO_L2N_T0L_N3_66 | 1.8 (LVCMOS18) |
| AK39 | CAPI_CLK_0_PIN_N | MGTREFCLK0N_124 | MGT REFCLK |
| AK38 | CAPI_CLK_0_PIN_P | MGTREFCLK0P_124 | MGT REFCLK |
| AF39 | CAPI_CLK_1_PIN_N | MGTREFCLK0N_125 | MGT REFCLK |
| AF38 | CAPI_CLK_1_PIN_P | MGTREFCLK0P_125 | MGT REFCLK |
| BF17 | CAPI_I2C_SCL_1V8 | IO_L1P_T0L_N0_DBC_64 | 1.8 (LVCMOS18) |
| BF16 | CAPI_I2C_SDA_1V8 | IO_L1N_T0L_N1_DBC_64 | 1.8 (LVCMOS18) |
| BF19 | CAPI_INT/RESET_1V8 | IO_L2P_T0L_N2_64 | 1.8 (LVCMOS18) |
| BF43 | CAP_RX0_N | MGTYRXN0_124 | MGT |
| BF42 | CAP_RX0_P | MGTYRXP0_124 | MGT |
| BD44 | CAP_RX1_N | MGTYRXN1_124 | MGT |
| BD43 | CAP_RX1_P | MGTYRXP1_124 | MGT |
| BB44 | CAP_RX2_N | MGTYRXN2_124 | MGT |
| BB43 | CAP_RX2_P | MGTYRXP2_124 | MGT |
| AY44 | CAP_RX3_N | MGTYRXN3_124 | MGT |
| AY43 | CAP_RX3_P | MGTYRXP3_124 | MGT |
| BC46 | CAP_RX4_N | MGTYRXN0_125 | MGT |
| BC45 | CAP_RX4_P | MGTYRXP0_125 | MGT |
| BA46 | CAP_RX5_N | MGTYRXN1_125 | MGT |
| BA45 | CAP_RX5_P | MGTYRXP1_125 | MGT |
| AW46 | CAP_RX6_N | MGTYRXN2_125 | MGT |
| AW45 | CAP_RX6_P | MGTYRXP2_125 | MGT |
| AV44 | CAP_RX7_N | MGTYRXN3_125 | MGT |
| AV43 | CAP_RX7_P | MGTYRXP3_125 | MGT |
| AT39 | CAPI_TX0_N | MGTYTXN0_124 | MGT |
| AT38 | CAP_TX0_P | MGTYTXP0_124 | MGT |
| Nomoro ea Pin | Lebitso la Letshwao | Pin Lebitso | Banka Voltage |
| AR41 | CAPI_TX1_N | MGTYTXN1_124 | MGT |
| AR40 | CAP_TX1_P | MGTYTXP1_124 | MGT |
| AP39 | CAPI_TX2_N | MGTYTXN2_124 | MGT |
| AP38 | CAP_TX2_P | MGTYTXP2_124 | MGT |
| AN41 | CAPI_TX3_N | MGTYTXN3_124 | MGT |
| AN40 | CAP_TX3_P | MGTYTXP3_124 | MGT |
| AM39 | CAPI_TX4_N | MGTYTXN0_125 | MGT |
| AM38 | CAP_TX4_P | MGTYTXP0_125 | MGT |
| AL41 | CAPI_TX5_N | MGTYTXN1_125 | MGT |
| AL40 | CAP_TX5_P | MGTYTXP1_125 | MGT |
| AJ41 | CAPI_TX6_N | MGTYTXN2_125 | MGT |
| AJ40 | CAP_TX6_P | MGTYTXP2_125 | MGT |
| AG41 | CAPI_TX7_N | MGTYTXN3_125 | MGT |
| AG40 | CAP_TX7_P | MGTYTXP3_125 | MGT |
| AV26 | EMCCLK_B | IO_L24P_T3U_N10_EMCCLK_65 | 1.8 (LVCMOS18) |
| BA31 | FABRIC_CLK_PIN_N | IO_L13N_T2L_N1_GC_QBC_66 | 1.8 (LVDS e nang le DIFF_TERM_ADV) |
| AY31 | FABRIC_CLK_PIN_P | IO_L13P_T2L_N0_GC_QBC_66 | 1.8 (LVDS e nang le DIFF_TERM_ADV) |
| BA8 | FPGA_FLASH_CE0_L | RDWR_FCS_B_0 | 1.8 (LVCMOS18) |
| AW24 | FPGA_FLASH_CE1_L | IO_L2N_T0L_N3_FWE_FCS2_B_65 | 1.8 (LVCMOS18) |
| AW7 | FPGA_FLASH_DQ0 | D00_MOSI_0 | 1.8 (LVCMOS18) |
| AV7 | FPGA_FLASH_DQ1 | D01_DIN_0 | 1.8 (LVCMOS18) |
| AW8 | FPGA_FLASH_DQ2 | D02_0 | 1.8 (LVCMOS18) |
| AV8 | FPGA_FLASH_DQ3 | D03_0 | 1.8 (LVCMOS18) |
| AV28 | FPGA_FLASH_DQ4 | IO_L22P_T3U_N6_DBC_AD0P
_D04_65 |
1.8 (LVCMOS18) |
| AW28 | FPGA_FLASH_DQ5 | IO_L22N_T3U_N7_DBC_AD0N
_D05_65 |
1.8 (LVCMOS18) |
| BB28 | FPGA_FLASH_DQ6 | IO_L21P_T3L_N4_AD8P_D06_65 | 1.8 (LVCMOS18) |
| BC28 | FPGA_FLASH_DQ7 | IO_L21N_T3L_N5_AD8N_D07_65 | 1.8 (LVCMOS18) |
| BA19 | GPIO_0_1V8_N | IO_L13N_T2L_N1_GC_QBC_64 | 1.8 (LVCMOS18kapa LVDS) |
| AY19 | GPIO_0_1V8_P | IO_L13P_T2L_N0_GC_QBC_64 | 1.8 (LVCMOS18kapa LVDS) |
| AY20 | GPIO_1_1V8_N | IO_L15N_T2L_N5_AD11N_64 | 1.8 (LVCMOS18kapa LVDS) |
| AY21 | GPIO_1_1V8_P | IO_L15P_T2L_N4_AD11P_64 | 1.8 (LVCMOS18kapa LVDS) |
| AW20 | GPIO_2_1V8_N | IO_L16N_T2U_N7_QBC_AD3N_64 | 1.8 (LVCMOS18kapa LVDS) |
| Nomoro ea Pin | Lebitso la Letshwao | Pin Lebitso | Banka Voltage |
| AV20 | GPIO_2_1V8_P | IO_L16P_T2U_N6_QBC_AD3P_64 | 1.8 (LVCMOS18kapa LVDS) |
| AW18 | GPIO_3_1V8_N | IO_L17N_T2U_N9_AD10N_64 | 1.8 (LVCMOS18kapa LVDS) |
| AW19 | GPIO_3_1V8_P | IO_L17P_T2U_N8_AD10P_64 | 1.8 (LVCMOS18kapa LVDS) |
| BA27 | IBM_PERST_1V8_L | IO_L20P_T3L_N2_AD1P_D08_65 | 1.8 (LVCMOS18) |
| BA18 | ISO_CLK_1V8 | IO_L14P_T2L_N2_GC_64 | 1.8 (LVCMOS18) |
| AD8 | PCIE_LCL_REFCLK_PIN_N | MGTREFCLK0N_226 | MGT REFCLK |
| AD9 | PCIE_LCL_REFCLK_PIN_P | MGTREFCLK0P_226 | MGT REFCLK |
| AF8 | PCIE_REFCLK_1_PIN_N | MGTREFCLK0N_225 | MGT REFCLK |
| AF9 | PCIE_REFCLK_1_PIN_P | MGTREFCLK0P_225 | MGT REFCLK |
| AB8 | PCIE_REFCLK_2_PIN_N | MGTREFCLK0N_227 | MGT REFCLK |
| AB9 | PCIE_REFCLK_2_PIN_P | MGTREFCLK0P_227 | MGT REFCLK |
| AL1 | PCIE_RX0_N | MGTYRXN3_227 | MGT |
| AL2 | PCIE_RX0_P | MGTYRXP3_227 | MGT |
| AM3 | PCIE_RX1_N | MGTYRXN2_227 | MGT |
| AM4 | PCIE_RX1_P | MGTYRXP2_227 | MGT |
| BA1 | PCIE_RX10_N | MGTYRXN1_225 | MGT |
| BA2 | PCIE_RX10_P | MGTYRXP1_225 | MGT |
| BC1 | PCIE_RX11_N | MGTYRXN0_225 | MGT |
| BC2 | PCIE_RX11_P | MGTYRXP0_225 | MGT |
| AY3 | PCIE_RX12_N | MGTYRXN3_224 | MGT |
| AY4 | PCIE_RX12_P | MGTYRXP3_224 | MGT |
| BB3 | PCIE_RX13_N | MGTYRXN2_224 | MGT |
| BB4 | PCIE_RX13_P | MGTYRXP2_224 | MGT |
| BD3 | PCIE_RX14_N | MGTYRXN1_224 | MGT |
| BD4 | PCIE_RX14_P | MGTYRXP1_224 | MGT |
| BE5 | PCIE_RX15_N | MGTYRXN0_224 | MGT |
| BE6 | PCIE_RX15_P | MGTYRXP0_224 | MGT |
| AK3 | PCIE_RX2_N | MGTYRXN1_227 | MGT |
| AK4 | PCIE_RX2_P | MGTYRXP1_227 | MGT |
| AN1 | PCIE_RX3_N | MGTYRXN0_227 | MGT |
| AN2 | PCIE_RX3_P | MGTYRXP0_227 | MGT |
| AP3 | PCIE_RX4_N | MGTYRXN3_226 | MGT |
| AP4 | PCIE_RX4_P | MGTYRXP3_226 | MGT |
| AR1 | PCIE_RX5_N | MGTYRXN2_226 | MGT |
| AR2 | PCIE_RX5_P | MGTYRXP2_226 | MGT |
| Nomoro ea Pin | Lebitso la Letshwao | Pin Lebitso | Banka Voltage |
| AT3 | PCIE_RX6_N | MGTYRXN1_226 | MGT |
| AT4 | PCIE_RX6_P | MGTYRXP1_226 | MGT |
| AU1 | PCIE_RX7_N | MGTYRXN0_226 | MGT |
| AU2 | PCIE_RX7_P | MGTYRXP0_226 | MGT |
| AV3 | PCIE_RX8_N | MGTYRXN3_225 | MGT |
| AV4 | PCIE_RX8_P | MGTYRXP3_225 | MGT |
| AW1 | PCIE_RX9_N | MGTYRXN2_225 | MGT |
| AW2 | PCIE_RX9_P | MGTYRXP2_225 | MGT |
| Y4 | PCIE_TX0_PIN_N | MGTYTXN3_227 | MGT |
| Y5 | PCIE_TX0_PIN_P | MGTYTXP3_227 | MGT |
| AA6 | PCIE_TX1_PIN_N | MGTYTXN2_227 | MGT |
| AA7 | PCIE_TX1_PIN_P | MGTYTXP2_227 | MGT |
| AL6 | PCIE_TX10_PIN_N | MGTYTXN1_225 | MGT |
| AL7 | PCIE_TX10_PIN_P | MGTYTXP1_225 | MGT |
| AM8 | PCIE_TX11_PIN_N | MGTYTXN0_225 | MGT |
| AM9 | PCIE_TX11_PIN_P | MGTYTXP0_225 | MGT |
| AN6 | PCIE_TX12_PIN_N | MGTYTXN3_224 | MGT |
| AN7 | PCIE_TX12_PIN_P | MGTYTXP3_224 | MGT |
| AP8 | PCIE_TX13_PIN_N | MGTYTXN2_224 | MGT |
| AP9 | PCIE_TX13_PIN_P | MGTYTXP2_224 | MGT |
| AR6 | PCIE_TX14_PIN_N | MGTYTXN1_224 | MGT |
| AR7 | PCIE_TX14_PIN_P | MGTYTXP1_224 | MGT |
| AT8 | PCIE_TX15_PIN_N | MGTYTXN0_224 | MGT |
| AT9 | PCIE_TX15_PIN_P | MGTYTXP0_224 | MGT |
| AB4 | PCIE_TX2_PIN_N | MGTYTXN1_227 | MGT |
| AB5 | PCIE_TX2_PIN_P | MGTYTXP1_227 | MGT |
| AC6 | PCIE_TX3_PIN_N | MGTYTXN0_227 | MGT |
| AC7 | PCIE_TX3_PIN_P | MGTYTXP0_227 | MGT |
| AD4 | PCIE_TX4_PIN_N | MGTYTXN3_226 | MGT |
| AD5 | PCIE_TX4_PIN_P | MGTYTXP3_226 | MGT |
| AF4 | PCIE_TX5_PIN_N | MGTYTXN2_226 | MGT |
| AF5 | PCIE_TX5_PIN_P | MGTYTXP2_226 | MGT |
| AE6 | PCIE_TX6_PIN_N | MGTYTXN1_226 | MGT |
| AE7 | PCIE_TX6_PIN_P | MGTYTXP1_226 | MGT |
| AH4 | PCIE_TX7_PIN_N | MGTYTXN0_226 | MGT |
| Nomoro ea Pin | Lebitso la Letshwao | Pin Lebitso | Banka Voltage |
| AH5 | PCIE_TX7_PIN_P | MGTYTXP0_226 | MGT |
| AG6 | PCIE_TX8_PIN_N | MGTYTXN3_225 | MGT |
| AG7 | PCIE_TX8_PIN_P | MGTYTXP3_225 | MGT |
| AJ6 | PCIE_TX9_PIN_N | MGTYTXN2_225 | MGT |
| AJ7 | PCIE_TX9_PIN_P | MGTYTXP2_225 | MGT |
| AW27 | PERST0_1V8_L | IO_T3U_N12_PERSTN0_65 | 1.8 (LVCMOS18) |
| AY27 | PERST1_1V8_L | IO_L23N_T3U_N9_PERSTN1_I 2C_SDA_65 | 1.8 (LVCMOS18) |
| AD39 | QSFP_CLK_PIN_N | MGTREFCLK0N_126 | MGT REFCLK |
| AD38 | QSFP_CLK_PIN_P | MGTREFCLK0P_126 | MGT REFCLK |
| AV16 | QSFP_INT_1V8_L | IO_L24P_T3U_N10_64 | 1.8 (LVCMOS18) |
| BA14 | QSFP_MODPRS_L | IO_L22N_T3U_N7_DBC_AD0N_64 | 1.8 (LVCMOS18) |
| AV15 | QSFP_RST_1V8_L | IO_L24N_T3U_N11_64 | 1.8 (LVCMOS18) |
| AU46 | QSFP_RX0_N | MGTYRXN0_126 | MGT |
| AU45 | QSFP_RX0_P | MGTYRXP0_126 | MGT |
| AT44 | QSFP_RX1_N | MGTYRXN1_126 | MGT |
| AT43 | QSFP_RX1_P | MGTYRXP1_126 | MGT |
| AR46 | QSFP_RX2_N | MGTYRXN2_126 | MGT |
| AR45 | QSFP_RX2_P | MGTYRXP2_126 | MGT |
| AP44 | QSFP_RX3_N | MGTYRXN3_126 | MGT |
| AP43 | QSFP_RX3_P | MGTYRXP3_126 | MGT |
| AN46 | QSFP_RX4_N | MGTYRXN0_127 | MGT |
| AN45 | QSFP_RX4_P | MGTYRXP0_127 | MGT |
| AK44 | QSFP_RX5_N | MGTYRXN1_127 | MGT |
| AK43 | QSFP_RX5_P | MGTYRXP1_127 | MGT |
| AM44 | QSFP_RX6_N | MGTYRXN2_127 | MGT |
| AM43 | QSFP_RX6_P | MGTYRXP2_127 | MGT |
| AL46 | QSFP_RX7_N | MGTYRXN3_127 | MGT |
| AL45 | QSFP_RX7_P | MGTYRXP3_127 | MGT |
| AW15 | QSFP_SCL_1V8 | IO_L23P_T3U_N8_64 | 1.8 (LVCMOS18) |
| AW14 | QSFP_SDA_1V8 | IO_L23N_T3U_N9_64 | 1.8 (LVCMOS18) |
| AH43 | QSFP_TX0_N | MGTYTXN0_126 | MGT |
| AH42 | QSFP_TX0_P | MGTYTXP0_126 | MGT |
| AE41 | QSFP_TX1_N | MGTYTXN1_126 | MGT |
| AE40 | QSFP_TX1_P | MGTYTXP1_126 | MGT |
| AF43 | QSFP_TX2_N | MGTYTXN2_126 | MGT |
| Nomoro ea Pin | Lebitso la Letshwao | Pin Lebitso | Banka Voltage |
| AF42 | QSFP_TX2_P | MGTYTXP2_126 | MGT |
| AD43 | QSFP_TX3_N | MGTYTXN3_126 | MGT |
| AD42 | QSFP_TX3_P | MGTYTXP3_126 | MGT |
| AC41 | QSFP_TX4_N | MGTYTXN0_127 | MGT |
| AC40 | QSFP_TX4_P | MGTYTXP0_127 | MGT |
| AB43 | QSFP_TX5_N | MGTYTXN1_127 | MGT |
| AB42 | QSFP_TX5_P | MGTYTXP1_127 | MGT |
| AA41 | QSFP_TX6_N | MGTYTXN2_127 | MGT |
| AA40 | QSFP_TX6_P | MGTYTXP2_127 | MGT |
| Y43 | QSFP_TX7_N | MGTYTXN3_127 | MGT |
| Y42 | QSFP_TX7_P | MGTYTXP3_127 | MGT |
| AV36 | SI5328_1V8_SCL | IO_L24N_T3U_N11_66 | 1.8 (LVCMOS18) |
| AV35 | SI5328_1V8_SDA | IO_L24P_T3U_N10_66 | 1.8 (LVCMOS18) |
| AE37 | SI5328_OUT_0_PIN_N | MGTREFCLK1N_125 | MGT REFCLK |
| AE36 | SI5328_OUT_0_PIN_P | MGTREFCLK1P_125 | MGT REFCLK |
| AB39 | SI5328_OUT_1_PIN_N | MGTREFCLK0N_127 | MGT REFCLK |
| AB38 | SI5328_OUT_1_PIN_P | MGTREFCLK0P_127 | MGT REFCLK |
| BB19 | SI5328_REFCLK_IN_N | IO_L12N_T1U_N11_GC_64 | 1.8 (LVDS) |
| BB20 | SI5328_REFCLK_IN_P | IO_L12P_T1U_N10_GC_64 | 1.8 (LVDS) |
| AV33 | SI5328_RST_1V8_L | IO_L22P_T3U_N6_DBC_AD0P_66 | 1.8 (LVCMOS18) |
| BE30 | SARE_SCL | IO_L5N_T0U_N9_AD14N_66 | 1.8 (LVCMOS18) |
| BC30 | SARE_SDA | IO_L6P_T0U_N10_AD6P_66 | 1.8 (LVCMOS18) |
| BD30 | SARE_WP | IO_L6N_T0U_N11_AD6N_66 | 1.8 (LVCMOS18) |
| BE31 | SRVC_MD_L_1V8 | IO_L3P_T0L_N4_AD15P_66 | 1.8 (LVCMOS18) |
| AV32 | USER_LED_A0_1V8 | IO_L18N_T2U_N11_AD2N_66 | 1.8 (LVCMOS18) |
| AW32 | USER_LED_A1_1V8 | IO_T2U_N12_66 | 1.8 (LVCMOS18) |
| AY30 | USER_LED_G0_1V8 | IO_L17N_T2U_N9_AD10N_66 | 1.8 (LVCMOS18) |
| AV31 | USER_LED_G1_1V8 | IO_L18P_T2U_N10_AD2P_66 | 1.8 (LVCMOS18) |
| AW33 | USR_SW_0 | IO_L22N_T3U_N7_DBC_AD0N_66 | 1.8 (LVCMOS18) |
| AY36 | USR_SW_1 | IO_L23P_T3U_N8_66 | 1.8 (LVCMOS18) |
Nalane ea Phetoho
| Letsatsi | Khatiso | Fetotsoe Ka | Sebopeho sa Phetoho |
| La 24 Loetse 2018 | 1.0 | K. Roth | Phatlalatso ea Pele |
|
La 31 Mphalane 2018 |
1.1 |
K. Roth |
Lits'oants'o tse ntlafalitsoeng tsa sehlahisoa, li fetotse maqhubu a oache a ka hlophisehang a CAPI_CLK_1 ho isa ho 161MHz |
|
La 14 Tšitoe 2018 |
1.2 |
K. Roth |
Nomoro ea karolo ea tlhophiso e ntlafalitsoeng, mantsoe a fetotsoeng a tlhaloso ea gpio bakeng sa ho nepahala, boima bo eketsehileng. |
|
La 24 Mphalane 2019 |
1.3 |
K. Roth |
E ntlafalitsoe Tlhophiso ho tlosa 'mapa oa aterese le tlhaloso e nepahetseng ea karolo ea mohopolo. |
|
La 25 Pherekhong 2022 |
1.4 |
K. Roth |
E ntlafalitsoe Mocheso Tshebetso ho kenyelletsa lipalo tse sebetsang hantle tsa mocheso le maikutlo mabapi le phello ea sekoaelo, litšupiso tse tlositsoeng ho QSFP0 le QSFP1 ho tsoa karolong. QSFP-DD le ho ntlafatsa karolo ea karolo ea 25Gb ea transceiver. |
Tšebeletso ea bareki
© 2022 Copyright Alpha Data Parallel Systems Ltd.
Litokelo tsohle li sirelelitsoe.
Sengoliloeng sena se sirelelitsoe ke Molao oa Copyright, 'me litokelo tsohle li sirelelitsoe. Ha ho karolo ea khatiso ena e ka hlahisoang bocha, ka sebopeho sefe kapa sefe, ntle le tumello e ngotsoeng esale pele ho tsoa ho Alpha Data Parallel Systems Ltd.
Ntlo-kholo
Aterese: Suite L4A, 160 Dundee Street,
Edinburgh, EH11 1DQ, UK
Mohala: +44 131 558 2600
Fax: +44 131 558 2700
lengolo-tsoibila: sales@alpha-data.com
websebaka: http://www.alpha-data.com
Ofisi ea US
Aterese: 10822 West Toller Drive, Suite 250
Littleton, CO 80127
Mohala: (303) 954 8768
Fax: (866) 820 9956 - mahala
lengolo-tsoibila: sales@alpha-data.com
websebaka: http://www.alpha-data.com
Matshwao ohle a kgwebo ke thepa ya beng ba ona.
Aterese: Suite L4A, 160 Dundee Street,
Edinburgh, EH11 1DQ, UK
Mohala: +44 131 558 2600
Fax: +44 131 558 2700
lengolo-tsoibila: sales@alpha-data.com
websebaka: http://www.alpha-data.com
Aterese: 10822 West Toller Drive, Suite 250
Littleton, CO 80127
Mohala: (303) 954 8768
Fax: (866) 820 9956 - mahala
lengolo-tsoibila: sales@alpha-data.com
websebaka: http://www.alpha-data.com
Litokomane / Lisebelisoa
 |
ALPHA DATA ADM-PCIE-9H3 Karete ea Ts'ebetso e Phahameng ea FPGA [pdf] Bukana ea Mosebelisi ADM-PCIE-9H3 Karete ea Ts'ebetso e Phahameng ea FPGA, ADM-PCIE-9H3, Karete ea Ts'ebetso e Phahameng ea FPGA, Karete ea Ts'ebetso ea FPGA, Karete ea Ts'ebetso. |
 |
ALPHA DATA ADM-PCIE-9H3 Karete ea Ts'ebetso e Phahameng ea FPGA [pdf] Bukana ea Mosebelisi ADM-PCIE-9H3 Karete ea Ts'ebetso e Phahameng ea FPGA, ADM-PCIE-9H3, Karete ea Ts'ebetso e Phahameng ea FPGA, Karete ea Ts'ebetso ea FPGA, Karete ea Ts'ebetso ea FPGA, Karete ea Ts'ebetso. |
