SandC R3 Kev Sib Txuas Lus Module Retrofit thiab Configuration
Cov ntaub ntawv khoom
Specifications
- Lub npe khoom: R3 Kev Sib Txuas Lus Module Retrofit thiab Configuration
- Phau Ntawv Qhia: 766-526
- Daim Ntawv Thov: Retrofit thiab Configuration ntawm Kev Sib Txuas Lus Module
- Chaw tsim tshuaj paus: S&C Electric Company
Tshajview
R3 Kev Sib Txuas Lus Module Retrofit thiab Configuration yog tsim los siv nrog cov khoom siv hluav taws xob hauv av thiab hauv av. Nws tso cai rau kev sib txuas lus module tshem tawm, teeb tsa rau Ethernet IP configuration, thiab suav nrog cov kab kos rau kev teeb tsa.
Kev Tiv Thaiv Kev Nyab Xeeb
Cov neeg tsim nyog muaj peev xwm paub txog kev teeb tsa, kev ua haujlwm, thiab kev saib xyuas cov khoom siv hluav taws xob yuav tsum tswj xyuas kev teeb tsa thiab kev ua haujlwm ntawm qhov module no. Yuav tsum tau ua raws li kev tiv thaiv kev nyab xeeb kom tsis txhob muaj kev phom sij.
Teem R3 Kev Sib Txuas Lus Module rau Ethernet IP
Kev teeb tsa
Txhawm rau teeb tsa R3 Kev Sib Txuas Lus Module rau Ethernet IP Configuration, ua raws li cov kauj ruam no:
- Nkag mus rau kev teeb tsa kev teeb tsa ntawm lub module.
- Xaiv qhov kev xaiv Ethernet IP configuration.
- Nkag mus rau qhov xav tau kev teeb tsa network xws li IP chaw nyob, subnet mask, thiab lub rooj vag.
- Txuag cov kev hloov pauv thiab rov pib lub module rau qhov kev teeb tsa tshiab kom siv tau.
Cov lus nug nquag nug (FAQ)
Q: Leej twg yuav tsum tswj kev teeb tsa thiab kev ua haujlwm ntawm R3 Kev Sib Txuas Lus Module?
A: Tsuas yog cov neeg tsim nyog paub txog cov khoom siv hluav taws xob yuav tsum nruab thiab ua haujlwm R3 Kev Sib Txuas Lus Module kom muaj kev nyab xeeb thiab ua haujlwm zoo.
Cov Neeg Tsim Nyog Tau Txais Kev Pab
CEEB TOOM
Tsuas yog cov neeg tsim nyog tau paub txog kev teeb tsa, kev ua haujlwm, thiab kev saib xyuas cov khoom siv hluav taws xob hauv av thiab hauv av, nrog rau txhua yam kev phom sij, tuaj yeem txhim kho, ua haujlwm, thiab tswj cov khoom siv los ntawm kev tshaj tawm no. Tus neeg tsim nyog yog ib tus neeg tau txais kev cob qhia thiab muaj peev xwm hauv:
- Cov txuj ci thiab cov tswv yim tsim nyog los paub qhov txawv ntawm qhov muaj sia nyob los ntawm qhov tsis muaj sia nyob ntawm cov khoom siv hluav taws xob
- Cov txuj ci thiab cov tswv yim tsim nyog los txiav txim siab qhov kev mus kom ze kom zoo sib xws rau voltages tus neeg tsim nyog yuav raug nthuav tawm
- Kev siv cov txheej txheem tshwj xeeb ceev faj, cov cuab yeej tiv thaiv tus kheej, cov ntaub ntawv insulated thiab shielding, thiab cov cuab yeej insulated rau kev ua hauj lwm ntawm los yog ze ze ntawm cov khoom siv hluav taws xob.
Cov lus qhia no tsuas yog rau cov neeg muaj peev xwm xwb. Lawv tsis yog tsim los ua ib qho kev hloov pauv rau kev cob qhia txaus thiab kev paub hauv cov txheej txheem kev nyab xeeb rau cov khoom siv no.
Khaws daim ntawv qhia no
CEEB TOOM
Ua tib zoo nyeem cov ntawv qhia no ua ntej txhim kho lossis ua haujlwm IntelliRupter PulseCloser Fault Interrupter. Ua Kom Paub Txog Cov Ntaub Ntawv Kev Nyab Xeeb ntawm nplooj 4 thiab Kev Tiv Thaiv Kev Nyab Xeeb ntawm nplooj 5. Cov ntawv tshaj tawm tshiab kawg no muaj nyob hauv online hauv PDF hom ntawm
sandc.com/en/support/product-literature/
Khaws daim ntawv qhia no kom tsim nyog
CEEB TOOM
Cov cuab yeej siv hauv kev tshaj tawm no tsuas yog npaj rau ib daim ntawv thov tshwj xeeb. Daim ntawv thov yuav tsum nyob rau hauv cov kev ntsuam xyuas muab rau cov khoom siv. Kev ntsuam xyuas rau IntelliRupter txhaum cuam tshuam tau teev nyob rau hauv cov lus ntsuas hauv S&C Specification Bulletin 766-31.
Tshwj xeeb Warranty Provisions
Tus qauv warranty muaj nyob rau hauv S&C tus qauv kev muag khoom, raws li tau teev tseg hauv Nqe Ntawv 150 thiab 181, siv rau IntelliRupter txhaum cuam tshuam, tshwj tsis yog thawj kab lus ntawm qhov kev lees paub tau hloov los ntawm cov hauv qab no:
- 10 xyoo txij li hnub xa khoom xa tuaj, cov khoom xa tuaj yuav yog qhov zoo thiab muaj txiaj ntsig tau teev tseg hauv daim ntawv cog lus piav qhia thiab yuav tsis muaj qhov tsis zoo ntawm kev ua haujlwm thiab cov khoom siv. Yog tias qhov tsis ua raws li qhov kev lees paub no tshwm sim raws li kev siv tau zoo thiab ib txwm siv tsis pub dhau 10 xyoo tom qab hnub xa khoom, tus neeg muag khoom pom zoo, raws li kev ceeb toom tam sim ntawd thiab paub meej tias cov cuab yeej tau muab khaws cia, teeb tsa, ua haujlwm, tshuaj xyuas, thiab khaws cia raws li cov lus pom zoo ntawm tus neeg muag khoom thiab tus qauv kev lag luam kev coj ua, los kho qhov tsis sib xws los ntawm kev kho cov khoom puas lossis puas tsuaj ntawm cov khoom siv lossis (ntawm tus neeg muag khoom xaiv) los ntawm kev xa khoom ntawm qhov tsim nyog hloov pauv. Tus neeg muag khoom lub warranty tsis siv rau txhua yam khoom siv uas tau muab tshem tawm, kho, lossis hloov kho los ntawm lwm tus uas tsis yog tus muag khoom. Qhov kev txwv txwv no tsuas yog tso cai rau tus neeg yuav khoom tam sim ntawd lossis, yog tias cov cuab yeej tau yuav los ntawm tus neeg thib peb rau kev teeb tsa hauv cov khoom siv thib peb, tus neeg siv khoom kawg. Tus neeg muag khoom lub luag haujlwm ua raws li kev lav phib xaub yuav raug ncua, ntawm tus neeg muag khoom xaiv ib leeg, kom txog rau thaum tus neeg muag khoom tau them tag nrho rau tag nrho cov khoom muag los ntawm tus neeg yuav khoom tam sim ntawd. Tsis muaj qhov ncua sij hawm yuav txuas ntxiv lub sijhawm lav.
Hloov qhov chaw muab los ntawm tus neeg muag khoom lossis kev kho los ntawm tus muag khoom raws li kev lav phib xaub rau cov cuab yeej qub yuav raug them los ntawm cov lus qhia tshwj xeeb saum toj no rau nws lub sijhawm. Hloov cov khoom sib cais yuav raug them los ntawm cov lus qhia tshwj xeeb saum toj no. - Rau cov khoom siv / cov kev pabcuam, cov neeg muag khoom lav rau ib lub sijhawm ntawm ib xyoos tom qab commissioning tias IntelliRupter fault interrupter yuav muab kev cais tsis siv neeg thiab kev teeb tsa cov txheej txheem raws li qhov kev pom zoo. Txoj kev kho yuav tsum yog qhov kev ntsuam xyuas ntxiv thiab kev teeb tsa ntawm lub
IntelliTeam® SG Automatic Restoration System kom txog thaum qhov kev xav tau tiav. - Warranty ntawm IntelliRupter fault interrupter yog muaj raws li lub installation, configuration, thiab siv cov kev tswj los yog software raws li S&C cov ntaub ntawv qhia siv tau.
- Qhov kev lees paub no tsis siv rau cov khoom tseem ceeb uas tsis yog S&C tsim khoom, xws li cov roj teeb thiab cov khoom siv sib txuas lus. Txawm li cas los xij, S&C yuav muab rau cov neeg yuav khoom tam sim lossis cov neeg siv kawg tag nrho cov chaw tsim khoom lag luam uas siv rau cov khoom tseem ceeb.
- Warranty ntawm cov khoom siv / cov kev pabcuam pob khoom muaj nyob rau thaum tau txais cov ntaub ntawv txaus ntawm tus neeg siv cov kev faib khoom, kom ntxaws ntxaws los npaj cov kev tshuaj xyuas. Tus neeg muag khoom tsis muaj lub luag haujlwm yog tias qhov kev ua ntawm qhov xwm txheej lossis ob tog dhau ntawm S&C kev tswj tsis zoo cuam tshuam rau kev ua haujlwm ntawm cov khoom siv / kev pabcuam pob khoom; rau example, kev tsim kho tshiab uas cuam tshuam rau kev sib txuas lus hauv xov tooj cua, lossis kev hloov pauv rau kev faib khoom uas cuam tshuam rau kev tiv thaiv kab ke, muaj qhov tsis raug tam sim no, lossis cov yam ntxwv ntawm cov khoom siv.
Cov ntaub ntawv kev nyab xeeb
Nkag siab txog cov lus ceeb toom kev nyab xeeb
Ntau hom kev ceeb toom kev nyab xeeb tuaj yeem tshwm sim thoob plaws hauv daim ntawv qhia no thiab ntawm cov ntawv thiab tags txuas rau cov khoom. Ua kom paub txog cov lus no thiab qhov tseem ceeb ntawm cov lus qhia ntau yam:
DANGER “
DANGER txheeb xyuas qhov teeb meem loj tshaj plaws thiab tam sim no uas yuav ua rau muaj kev raug mob hnyav lossis tuag rau tus kheej yog tias cov lus qhia, suav nrog cov lus pom zoo kom ceev faj, tsis ua raws.
CEEB TOOM
“CEEB TOOM” txheeb xyuas cov kev phom sij lossis kev coj tsis zoo uas tuaj yeem ua rau tus kheej raug mob lossis tuag yog tias cov lus qhia, suav nrog cov lus pom zoo kom ceev faj, tsis ua raws.
Ua raws li cov lus qhia kev nyab xeeb
CEEB TOOM
"CAUTION" txheeb xyuas cov kev phom sij lossis kev coj tsis zoo uas tuaj yeem ua rau tus kheej raug mob me me yog tias cov lus qhia, suav nrog cov lus pom zoo kom ceev faj, tsis ua raws. CEEB TOOM “NOTICE” txheeb xyuas cov txheej txheem tseem ceeb lossis cov kev cai uas tuaj yeem ua rau cov khoom lossis khoom puas tsuaj yog tias tsis ua raws li cov lus qhia. Yog ib feem ntawm qhov no kev qhia daim ntawv tsis meej thiab xav tau kev pab, hu rau S&C Chaw Muag Khoom lossis S&C Tso Cai Distributor ze tshaj plaws. Lawv cov xov tooj muaj nyob rau ntawm S&C's webqhov chaw sande.com, lossis hu rau SEC Global Support and Monitoring Center ntawm 1-888-762-1100 Ib.
CEEB TOOM Nyeem daim ntawv qhia no kom ntxaws thiab ua tib zoo ua ntej txhim kho IntelliRupter txhaum cuam tshuam.
Hloov cov lus qhia thiab daim ntawv lo
Yog xav tau cov ntawv luam ntxiv ntawm daim ntawv qhia no, hu rau S&C Chaw Muag Khoom nyob ze, S&C Tso Cai Distributor, S&C Headquarters, los yog S&C Electric Canada Ltd.
Nws yog ib qho tseem ceeb uas cov ntawv uas ploj lawm, puas, lossis ploj lawm ntawm cov khoom yuav raug hloov tam sim ntawd. Cov ntawv hloov pauv yog muaj los ntawm kev hu rau S&C Chaw Muag Khoom ze tshaj plaws, S&C Tso Cai Distributor, S&C Headquarters, lossis S&C Electric Canada Ltd.
DANGER
IntelliRupter PulseCloser Fault Interrupters ua haujlwm ntawm qhov siab voltage. Tsis ua raws li kev ceev faj hauv qab no yuav ua rau tus kheej raug mob lossis tuag.
Qee qhov kev ceev faj no yuav txawv ntawm koj lub tuam txhab cov txheej txheem ua haujlwm thiab cov cai. Qhov twg muaj qhov sib txawv, ua raws li koj lub tuam txhab cov txheej txheem thiab cov cai.
- Cov neeg tsim nyog. Kev nkag mus rau IntelliRupter txhaum cuam tshuam yuav tsum raug txwv rau cov neeg tsim nyog nkaus xwb. Saib "Cov Neeg Tsim Nyog" ntu ntawm nplooj 2.
- SAFETY PROCEDURES. Ib txwm ua raws li cov txheej txheem ua haujlwm nyab xeeb thiab cov cai.
- PERSONAL PROTECTIVE EQUIPMENT. Ib txwm siv cov cuab yeej tiv thaiv tsim nyog, xws li hnab looj tes roj hmab, roj hmab mats, lub kaus mom tawv, tsom iav kev nyab xeeb, thiab cov khaub ncaws flash, raws li cov txheej txheem kev nyab xeeb thiab cov cai.
- SAFETY LABELS. Tsis txhob tshem tawm lossis tsis pom qhov "DANGER," "WARNING," "CAUTION," lossis "NOTICE" cov ntawv lo.
- CHAW UA HAUJ LWM THIAB BASE. IntelliRupter fault interrupters muaj qhov nrawm nrawm uas tuaj yeem ua rau tus ntiv tes raug mob hnyav. Tsis txhob tshem tawm lossis disassemble cov txheej txheem khiav haujlwm lossis tshem tawm cov kev nkag nkag ntawm IntelliRupter txhaum cuam tshuam lub hauv paus tshwj tsis yog tau hais kom ua los ntawm S&C Electric Company.
- ENERGIZED COMPONENTS. Nco ntsoov xav txog txhua qhov chaw nyob kom txog thaum de-energized, kuaj, thiab hauv av. Lub zog sib xyaw ua ke muaj cov khoom siv uas tuaj yeem khaws tau ib qho voltage them rau ntau hnub tom qab IntelliRupter txhaum cuam tshuam tau de-energized thiab tuaj yeem muab tus nqi zoo li qub thaum nyob ze rau qhov siab-vol.tage qhov chaw. Voltage theem tuaj yeem siab npaum li lub ncov kab-rau-hauv av voltage kawg siv rau chav tsev. Cov energized los yog ntsia ze ntawm cov energized kab yuav tsum tau txiav txim siab nyob rau hauv kom txog thaum kuaj thiab grounded.
- HAIV NEEG. Lub hauv paus ntawm IntelliRupter txhaum cuam tshuam yuav tsum tau txuas nrog lub ntiaj teb tsim nyog hauv av ntawm lub hauv paus ntawm tus ncej hluav taws xob, lossis rau lub tsev tsim nyog rau kev sim, ua ntej energizing IntelliRupter txhaum cuam tshuam, thiab txhua lub sijhawm thaum muaj zog.
- Hauv av xaim (s) yuav tsum tau khi rau qhov nruab nrab, yog tias muaj. Yog tias qhov nruab nrab tsis nyob hauv qhov system, yuav tsum tau ceev faj kom zoo kom ntseeg tau tias lub hauv paus hauv av, lossis lub tsev hauv av, tsis tuaj yeem raug txiav lossis tshem tawm.
- VACUUM INTERRUPTER POSITION. Ib txwm lees paub qhov Qhib / Kaw txoj haujlwm ntawm txhua tus neeg cuam tshuam los ntawm kev pom nws qhov taw qhia. • Interrupters, davhlau ya nyob twg pads, thiab disconnect hniav ntawm disconnect-style qauv tej zaum yuav energized los ntawm ob sab ntawm lub IntelliRupter txhaum interrupter.
- Interrupters, davhlau ya nyob twg pads, thiab disconnect blades ntawm disconnect-style qauv yuav energized nrog interrupters nyob rau hauv txhua txoj hauj lwm.
- TXOJ CAI TSHUAJ TIV THAIV. Ib txwm tswj kom raug tshem tawm los ntawm cov khoom muaj zog.
Tshajview
S&C cov khoom yuav raug hloov kho kom ntxiv cov yam ntxwv tshiab rau lub rooj sib txoos uas twb muaj lawm. Cov ntaub ntawv kho dua yog teev tom qab tus lej catalog nrog "R" thiab tus lej hloov kho. Cov khoom uas xav tau rau kev kho dua tshiab kuj raug xa mus nrog tib lub npe Rx.
Ib qho R0 Kev Sib Txuas Lus Module uas twb muaj lawm tuaj yeem hloov kho mus rau R3 kev ua haujlwm los ntawm kev txhim kho R3 Wi-Fi / GPS transceiver thiab harnesses.
- S&C Power Systems Solutions tuaj yeem cob qhia cov neeg ua haujlwm siv hluav taws xob los ua R3 retrofit.
- Lub retrofit yuav tsum tau ua nyob rau hauv tsev ntawm ib tug electrostatic-tso tawm tiv thaiv workbench.
- Lub xov tooj cua SCADA tuaj yeem teeb tsa hauv qhov chaw pabcuam rau kev teeb tsa ntawm ib qhov chaw tshwj xeeb.
- R3 Kev Sib Txuas Lus Module tuaj yeem ntsia tau yooj yim ntawm qhov chaw los ntawm cov neeg ua haujlwm kab.
Nco tseg: Lub IntelliRupter txhaum cuam tshuam tseem ua haujlwm tag nrho thaum lub sijhawm sib pauv kev sib txuas lus. Yuav tsis muaj kev cuam tshuam txog kev pabcuam.
Nco tseg: Thaum tsim cov txheej txheem kev sib hloov los hloov cov kev sib txuas lus ntawm qhov chaw, txhua lub xov tooj cua SCADA yuav tsum tau teeb tsa hauv qhov chaw pabcuam rau qhov chaw tshwj xeeb uas nws yuav raug teeb tsa.
- CEEB TOOM
Cov lus qhia no yog tsim los siv los ntawm cov neeg ua haujlwm uas tau kawm los ntawm S&C Electric Company Service Personnel
Cov txheej txheem electrostatic-tso tawm yuav tsum tau ua raws li vim hais tias cov khoom yog rhiab heev rau electrostatic-tso paug puas.
Yuav tsum siv SCS 8501 Static Dissipative Mat thiab Wrist Groundstrap lossis lub rooj zaum tiv thaiv zoo li qub. - CEEB TOOM
R3 retrofit yuav tsum tau ua nyob rau hauv tsev nyob rau hauv ib lub chaw soj nstuam los yog chaw pab cuam ib puag ncig ntawm ib tug zoo li qub-tswj workbench. - CEEB TOOM
Kev teeb tsa ntawm cov khoom siv R3 retrofit yam tsis muaj kev cob qhia kom raug yuav tsis muaj qhov lav. Hu rau S&C los npaj kev cob qhia los ntawm S&C Electric Company Service Personnel. - Cov kev sib txuas lus module tuaj yeem raug tshem tawm yooj yim thiab hloov los ntawm lub thoob tsheb thauj khoom siv lub hookstick.
- CEEB TOOM
Txhawm rau tiv thaiv kev sib kis ntawm cov khoom sib txuas, tsis txhob tso cov khoom sib txuas rau hauv av yam tsis muaj qee yam kev tiv thaiv los ntawm cov av thiab av nkos. - Tshem tawm cov kev sib txuas lus module tuaj yeem ua tiav los ntawm lub thoob lub tsheb thauj khoom nrog lub module tuav haum txuas nrog rau qhov haum hooks.
- CEEB TOOM
Kev sib txuas lus module yog hnyav, hnyav tshaj 26 phaus (12 kg). S&C tsis pom zoo kom tshem tawm thiab hloov los ntawm hauv av siv ib qho extendostick. Qhov no tej zaum yuav ua rau me me raug mob los yog khoom puas tsuaj.
Tshem tawm thiab hloov cov kev sib txuas lus module los ntawm lub thoob tsheb thauj khoom siv lub module tuav haum nrog rau ib tug haum hookstick.
Ua raws li cov kauj ruam no kom tshem tawm cov kev sib txuas lus module:
- KAUJ RUAM 1. Ntxig qhov tuav haum rau hauv lub latch module thiab thawb rau ntawm tus hooks. Tig qhov haum 90 degrees counterclockwise (raws li viewed los ntawm lub hauv qab ntawm lub hauv paus) qhib lub latch. Saib daim duab 1.
- KAUJ RUAM 2. Tshem tawm cov kev sib txuas lus ntawm lub hauv paus. Saib daim duab 2. Rub nyuaj heev kom tshem tawm cov hlua txuas.
- KAUJ RUAM 3. Tshem tawm cov khoom siv los ntawm lub tshuab latch los ntawm kev thawb rau ntawm tus nuv thaum tig nws 90 degrees clockwise. Muab qhov kev sib txuas lus module rau ntawm qhov chaw huv, qhuav. Saib daim duab 3.
Kev sib txuas lus Module Retrofit
Cov cuab yeej xav tau
- Txiv ntseej tsav, ¼-inch
- Txiv ntseej tsav tsheb, ⅜-inch
- Phillips screwdriver, nruab nrab
- Flathead screwdriver, nruab nrab
- Diagonal hlau cutter (txiav los yog trim cable ties)
- SCS 8501 Static Dissipative Mat
Tshem lub xov tooj cua tais
Ua raws li cov kauj ruam no kom tshem tawm lub xov tooj cua sib dhos los ntawm kev sib txuas lus module:
- Kauj ruam 1. Loosen lub roj teeb compartment cover locking ntsia hlau thiab qhib lub roj teeb compartment cover. Saib daim duab 4.
- Kauj Ruam 2. Tshem tawm tsib lub ¼–20 bolts uas txuas lub xov tooj cua sib dhos siv lub ⅜-inch txiv ntseej tsav. Khaws cov bolts. Saib daim duab 4.
- Kauj Ruam 3. Xaub lub tais xov tooj cua tawm ntawm qhov kev sib txuas lus module. Saib daim duab 5.
- Kauj Ruam 4. Muab lub xov tooj cua tso rau ntawm lub static dissipative lev lossis static grounded workbench. Saib daim duab 6.
CEEB TOOM
Kev tuav lub R3 Wi-Fi / GPS module yam tsis muaj kev tiv thaiv electrostatic zoo yuav ua rau cov khoom lav tsis tau. Txhawm rau tiv thaiv R3 Wi-Fi / GPS module, siv SCS 8501 Static Control Field Service Kit. Cov khoom siv tuaj yeem yuav ntawm nws tus kheej lossis los ntawm S&C Electric Company siv tus lej 904-002511-01.
Nco tseg: Thaum ua tsuas yog hloov Ethernet teeb tsa, mus rau "Setting R3 Communication Module rau Ethernet IP Configuration" ntu ntawm nplooj 13.
Tshem tawm R0 Wi-Fi / GPS Module
R0 Wi-Fi / GPS module, nrog rau kev sib txuas rau lub hwj chim, cov ntaub ntawv, thiab kav hlau txais xov, yog mounted rau sab ntawm lub xov tooj cua tais. Saib daim duab 7.
Ua raws li cov kauj ruam no kom tshem tawm R0 Wi-Fi / GPS module Circuit Court board. Saib daim duab 7.
- KAUJ RUAM 1. Thaum lub xov tooj cua SCADA raug teeb tsa:
- Disconnect tag nrho cov cables ntawm lub xov tooj cua.
- Siv Phillips ntswj ntsia hlau los tshem cov ntsia hlau txuas lub xov tooj cua mounting phaj rau hauv xov tooj cua tais.
- Txuag cov ntsia hlau thiab tshem tawm cov xov tooj cua thiab xov tooj cua mounting phaj.
- KAUJ RUAM 2. Tshem tawm ob lub kav hlau txais xov. Lawv tau sau npe GPS thiab Wi-nkaus kom raug rov ua dua tshiab.
- KAUJ RUAM 3. Disconnect lub connector ntawm sab laug. KAUJ RUAM 4. Txiav ob txoj hlua khi uas qhia. Saib daim duab 7. KAUJ RUAM 5. Txiav cov hlua khi uas qhia hauv daim duab 8.
- KAUJ RUAM 6. Tshem tawm rau 9 qhov kev sib tw mounting ceev (yuav tsis rov siv dua), thiab tshem tawm lub rooj tsav xwm hauv Circuit Court. Saib daim duab XNUMX.
Kev sib txuas lus Module Retrofit
Txhim kho R3 Wi-Fi / GPS Module
R3 Kev Sib Txuas Lus Module Retrofit Kit yog tus lej teev npe 903-002475-01. Ua raws li cov kauj ruam no rau nruab R3 Wi-Fi / GPS module.
- KAUJ RUAM 1. Muab cov hlua khi uas txuas nrog lub rooj tsav xwm R0 raws li qhia hauv daim duab 10 thiab khi nws nrog cov kab ntawv qhia.
- KAUJ RUAM 2. Txuas cov hlua tshiab rau hauv cov hlua txuas uas twb muaj lawm. Saib daim duab 10 thiab 11.
- KAUJ RUAM 3. Nruab R3 Wi-Fi/GPS module mounting phaj rau sab ntawm lub xov tooj cua tais nrog rau 12 tus ntsia hlau. Saib daim duab 13 thiab XNUMX.
- KAUJ RUAM 4. Nruab lub ferrite choke nyob ib ncig ntawm lub grey cables thiab nruab peb cable ties ntawm lub ferrite. Saib daim duab 13.
- KAUJ RUAM 5. Txhim kho ob txoj hlua txuas ze ntawm qhov txuas thiab ob txoj hlua txuas ze ntawm cov hlua grey. Saib daim duab 13.
- Kauj Ruam 6. Txuas cov cables rau Wi-nkaus / GPS module. Saib daim duab 14.
- Ob lub kav hlau txais xov txuas tau cim rau "GPS" thiab "Wi-Fi." Txuas lawv raws li qhia.
- Peb lub grey cables yog cim rau qhov tsim nyog connector. Txuas lawv los ntawm sab saum toj mus rau hauv qab hauv qhov kev txiav txim no: J18, J17, thiab J16. Connector J15 tsis siv.
- Txuas cov cables raws li qhia hauv cov kauj ruam no ua raws li kev ua haujlwm ntawm RO Kev Sib Txuas Lus Module, uas yog kev sib txuas lus sib txuas. Rau Ethernet IP configuration, mus rau "Setting the R3 Communication Module for Ethernet IP Configuration" seem nyob rau nplooj 13.
- KAUJ RUAM 7. Reinstall SCADA xov tooj cua thiab mounting phaj nrog cov Phillips screws uas twb muaj lawm.
- KAUJ RUAM 8. Reconnect lub xov tooj cua fais fab cable, kav hlau txais xov, thiab cov serial thiab/los yog Ethernet cables.
Reinstalling lub xov tooj cua tais
- KAUJ RUAM 1. Rov nruab lub xov tooj cua hauv lub qhov rooj sib txuas lus. (a) Ntxig lub xov tooj cua rau hauv qhov kev sib txuas lus module. Saib daim duab 15. (b) Nruab tsib lub ¼-20 bolts uas twb muaj lawm uas txuas lub xov tooj cua sib dhos siv lub ⅜-inch txiv ntseej tsav. Saib daim duab 16. (c) Kaw lub roj teeb lub hau npog thiab muab lub hau kaw kom nruj.
- KAUJ RUAM 2. Nruab daim ntawv tshiab "R3" rau ntawm lub phaj pem hauv ntej hauv qhov chaw so ntawm sab xis raws li qhia hauv daim duab 17.
- KAUJ RUAM 3. Yog tias Ethernet IP configuration tau teeb tsa, nruab "-E" daim ntawv lo rau ntawm lub vaj huam sib luag pem hauv ntej.
CEEB TOOM
- Kev tsim nyog hauv av nrog lub dab teg txuas nrog hauv av yog qhov yuav tsum tau thaum kov cov khoom sib txuas hauv kev sib txuas lus lossis kev sib cuag ntawm R3 Kev Sib Txuas Lus Module connector.
- R3 Kev Sib Txuas Lus Module raug xa los ntawm lub Hoobkas nrog kev sib txuas lus sib txuas. Saib daim duab thaiv hauv daim duab 41 ntawm nplooj ntawv 23. Ntu no qhia txog kev teeb tsa lub module kom siv Ethernet IP configuration, uas tso cai rau cov chaw taws teeb nkag mus rau Wi-Fi/GPS tus neeg siv interface, ua rau tej thaj chaw deb firmware hloov tshiab, thiab tso cai rau siv cov kev ruaj ntseg siab heev. muaj nyob rau hauv R3 Kev Sib Txuas Lus Module firmware version 3.0.00512. Saib daim duab txuas hauv daim duab 42 ntawm nplooj ntawv 24. Txhawm rau teeb tsa R3 Kev Sib Txuas Lus Module rau Ethernet IP thaiv,
- WAN tsheb yuav tsum tau hla dhau ntawm Wi-Fi / GPS module.
- Ua raws li cov kauj ruam no los hloov R3 Kev Sib Txuas Lus Module los ntawm serial kev sib txuas lus configuration thaiv rau IP configuration module thaiv:
- KAUJ RUAM 1. Ntawm lub cuab yeej sib txuas lus, rub lub RJ45 cable uas khiav ntawm cov khoom sib txuas lus thiab cov tswj module. Saib daim duab 14 ntawm nplooj 11.
- KAUJ RUAM 2. Ntawm Wi-Fi / GPS module, ntsaws RJ45 cable los ntawm kev tswj rau hauv Ethernet 1 ntawm Wi-Fi / GPS module. Saib daim duab 18.
- KAUJ RUAM 3. Nrhiav Ethernet thaj qaum uas muab nrog R3 Kev Sib Txuas Lus Module thiab ntsaws ib qho kawg rau hauv Ethernet 2 ntawm Wi-Fi / GPS module thiab lwm qhov rau hauv Ethernet chaw nres nkoj ntawm cov khoom sib txuas lus. Saib daim duab 19.
- KAUJ RUAM 4. Nruab lub DB-9 cable rau lub teb kev sib txuas lus ntaus ntawv kom Wi-Fi sib txuas lus nrog cov cuab yeej ntawd. Saib S&C Instruction Sheet 766-528 nrog module firmware version 3.0.00512 lossis Instruction Sheet 766-524 rau lwm cov firmware versions. Saib daim duab 19.
- KAUJ RUAM 5. Ua raws li cov lus qhia nyob rau hauv ntu "Kev txhim kho lub xov tooj cua rov qab" ntawm nplooj 12.
- KAUJ RUAM 6. Txiav txim siab seb tus IP chaw nyob, daim npog qhov ncauj qhov ntswg, thiab lub qhov rooj qhov chaw nyob qhov twg IntelliRupter txhaum kev cuam tshuam cuam tshuam siv los ntawm kev mus rau IntelliLink® Teeb Software Teeb> Kev Sib Tham> Ethernet screen. Saib daim duab 20. Luam cov ntaub ntawv no cia vim tias nws yuav xav tau los teeb tsa R3 Kev Sib Txuas Lus Module's WAN interface. Yog tias tsis muaj Ethernet IP cov ntaub ntawv teeb tsa hauv IntelliRupter txhaum kev cuam tshuam kev tswj hwm, ces hla mus rau kauj ruam tom ntej.
- STEP 7. Configure IntelliRupter fault interrupter control module's Ethernet 1 tab: Ethernet IP Address setpoint rau 192.168.1.2, Network Address setpoint rau 192.168.1.0, Subnet Mask setpoint rau 255.255.255.0, Broadcast Chaw nyob 192.168.1.255. thiab Default Gateway Chaw Nyob setpoint rau 192.168.1.1. Saib daim duab 21. Nco ntsoov: Qhov kev teeb tsa no xav tias R3 Kev Sib Txuas Lus Module's Ethernet 1 IP chaw nyob yog teem rau lub neej ntawd ntawm 192.168.1.1 nrog Netmask ntawm 255.255.255.0. Yog tias tau hloov pauv, ces Ethernet 1 IP Chaw Nyob, Chaw Nyob Network, Subnet Mask, thiab Default Gateway ntawm IntelliRupter kev cuam tshuam kev cuam tshuam yuav tsum tau teeb tsa kom nyob rau tib lub network li R3 Kev Sib Txuas Lus Module Ethernet 1 network.
Ua raws li cov kauj ruam no los qhib Peb-re confguration cov ntxaij vab tshaus hauv R3 Kev Sib Txuas Lus Module (catalog nab npawb SDA-45543):
- KAUJ RUAM 1. Hauv Windows® 10 Start menu, xaiv Start>Programs> S&C Electric> LinkStart> LinkStart V4. Wi-Fi Connection Management screen yuav qhib. Saib daim duab 22.
- KAUJ RUAM 2. Nkag mus rau tus lej xov tooj ntawm IntelliRupter txhaum cuam tshuam thiab nyem rau ntawm pob txuas. Saib daim duab 22.
Cov khawm Txuas hloov pauv mus rau khawm Ncua tseg, thiab kev sib txuas ua tiav tau pom nyob rau ntawm kab xwm txheej txuas. Saib daim duab 23. Thaum qhov kev sib txuas tau tsim, qhov xwm txheej bar qhia tias "Kev Sib Txuas Ua Tau Zoo" thiab qhia txog cov khoom ntsuab ntsuab. Daim duab ntsug bar qhia txog lub zog ntawm kev sib txuas ntawm Wi-nkaus. Saib daim duab 24. - KAUJ RUAM 3. Qhib cov cuab yeej ntawv qhia zaub mov thiab nyem rau ntawm Wi-nkaus tswj kev xaiv. Saib daim duab 25.
Tus ID nkag mus screen qhib nrog tus username thiab password sib tw. Saib daim duab 26. Cov ntxaij vab tshaus no tshwm nyob rau hauv Internet browser ntawm lub computer. Cov browser txhawb nqa muaj xws li Google Chrome thiab Microsoft Edge. IP chaw nyob yog tso tawm nyob rau sab saum toj ntawm lub vijtsam thiab muab los ntawm R3 Kev Sib Txuas Lus Module. - KAUJ RUAM 4. Nkag mus rau tus neeg siv lub npe thiab tus password thiab nyem rau ntawm lub pob nkag mus. Authentication xwm txheej tshwm sim. Saib daim duab 26 thiab 27. Tus neeg siv lub npe thiab lo lus zais tuaj yeem thov tau los ntawm S&C los ntawm kev hu rau Lub Chaw Pabcuam Ntiaj Teb thiab Saib Xyuas ntawm 888-762- 1100 lossis hu rau S&C los ntawm S&C Cov Neeg Siv Khoom
Portal ntawm sande.com/en/support. Ua raws li cov kauj ruam no kom rov kho dua WAN interface ntawm R3 Kev Sib Txuas Lus Module yog siv software versions ntxov dua 3.0.x. Txwv tsis pub, hla mus rau Kauj Ruam 1 ntawm nplooj 18 yog tias khiav software version 3.0.x lossis tom qab:
Ua raws li cov kauj ruam no kom rov kho dua WAN interface ntawm R3 Kev Sib Txuas Lus Module yog siv software versions ntxov dua 3.0.x. Txwv tsis pub, hla mus rau Kauj Ruam 1 ntawm nplooj 18 yog tias khiav software version 3.0.x lossis tom qab:
- Kauj ruam 1. Thaum lub neej ntawd username thiab lo lus zais nkag, Profile screen opens thiab prompts muab ib tug tshiab lo lus zais nkag thiab kev pom zoo. Hloov tus password default rau tus password tshwj xeeb rau kev ruaj ntseg. Thaum cov ntawv sau tiav lawm, nyem rau ntawm khawm Thov kom txuag tau tus password tshiab. Saib daim duab 28. Tom qab hloov tus password, lub vijtsam General Status tshwm. Saib daim duab 29 ntawm nplooj 17.
KAUJ RUAM 2. Nyem rau ntawm qhov kev xaiv Interfaces hauv cov ntawv qhia zaub mov sab laug kom qhib qhov Interfaces screen. Saib daim duab 30. - KAUJ RUAM 3. Mus rau Ethernet 2 (WAN) vaj huam sib luag thiab toggle lub Enable setpoint mus rau On txoj hauj lwm kom pab tau lub Ethernet 2 interface, yog hais tias tsis tau enabled, thiab xyuas kom meej lub DHCP Client setpoint yog neeg xiam thiab nyob rau hauv lub Off txoj hauj lwm.
Tam sim no, teeb tsa qhov chaw nyob IP Static nrog qhov chaw nyob IP uas tau theej los ntawm IntelliR- upter fault interrupter's Ethernet IP chaw nyob hauv Kauj Ruam 6 ntawm nplooj 14. Ua tib yam rau Netmask setpoint (uas yuav yog lub npog ntsej muag subnet theej los ntawm IntelliRupter txhaum cuam tshuam. ) thiab Default Gateway IP Chaw teeb tsa (uas yuav yog qhov chaw nyob ntawm qhov chaw nyob ntawm Intellik-upter txhaum cuam tshuam). Tom qab ntawd, nyem rau ntawm Txuag khawm nyob rau sab xis saum toj ntawm lub vijtsam kom txuag tau qhov teeb tsa. Saib daim duab 31. Ua raws li cov kauj ruam no thaum siv R3 Kev Sib Txuas Lus Module khiav software versions 3.0.x lossis tom qab ntawd txhawm rau teeb tsa Ethernet 2 (WAN) Interface:
Teem R3 Kev Sib Txuas Lus Module rau Ethernet IP Configuration
- KAUJ RUAM 1. Thaum tus neeg siv lub npe thiab lo lus zais nkag mus, lub vijtsam Kuv Tus Neeg Siv Khoom yuav qhib thiab ua rau kev tso cai ntawm tus password tshiab nkag thiab lees paub. Lub neej ntawd lo lus zais yuav tsum tau hloov mus rau tus password tshwj xeeb rau kev ruaj ntseg. Tus password nkag yuav tsum muaj tsawg kawg yog yim lub cim nyob rau hauv qhov ntev thiab muaj tsawg kawg yog ib tsab ntawv loj, ib tsab ntawv me, ib tus lej, thiab ib tus cim tshwj xeeb: Tus Thawj Tswj lossis ib tus neeg siv uas muaj lub luag haujlwm tswj hwm kev ruaj ntseg tuaj yeem hloov kho lo lus zais nyuaj. Thaum cov ntawv sau tiav, nyem rau ntawm lub pob Txuag kom txuag tau tus password tshiab. Saib daim duab 32. Tom qab hloov tus password, lub vijtsam General Status yuav tshwm sim. Saib daim duab 33.
- KAUJ RUAM 2. Nyem rau ntawm qhov kev xaiv Interfaces hauv cov ntawv qhia zaub mov sab laug kom qhib qhov Interfaces screen. Saib daim duab 34.
- KAUJ RUAM 3. Mus rau ntu Ethernet 2 (WAN) thiab ua kom lub interface los ntawm toggling lub Enable Ethernet 2 setpoint mus rau On txoj hauj lwm, yog hais tias tsis tau enabled, thiab xyuas kom meej DHCP Client setpoint yog neeg xiam thiab nyob rau hauv lub Off txoj hauj lwm. Tam sim no, teeb tsa qhov chaw nyob IP Static nrog qhov chaw nyob IP uas tau theej los ntawm IntelliRupter txhaum cuam tshuam tus Ethernet IP chaw nyob hauv Kauj Ruam 6 ntawm nplooj 14. Ua tib yam rau Netmask setpoint (uas yuav yog lub npog ntsej muag subnet theej los ntawm IntelliRupter txhaum cuam tshuam) thiab Qhov Default Gateway IP Chaw teeb tsa (uas yuav yog qhov chaw nyob qhov rooj nkag los ntawm IntelliR- upter fault interrupter). Tom qab ntawd, nyem rau ntawm Txuag khawm nyob rau sab xis saum toj ntawm lub vijtsam kom txuag tau qhov teeb tsa. Saib daim duab 35.
Cov kev sib txuas lus module tuaj yeem ntsia tau los ntawm lub thoob lub tsheb thauj khoom nrog lub module tuav haum txuas nrog rau qhov haum hooks.
CEEB TOOM
Kev sib txuas lus module yog hnyav, hnyav tshaj 26 phaus (12 kg). S&C tsis pom zoo kom tshem tawm thiab hloov los ntawm hauv av siv ib qho extendostick. Qhov no tej zaum yuav ua rau me me raug mob los yog khoom puas tsuaj.
Tshem tawm thiab hloov cov kev sib txuas lus module los ntawm lub thoob tsheb thauj khoom siv lub module tuav haum nrog rau ib tug haum hookstick.
Ua raws li cov kauj ruam no rau nruab qhov kev sib txuas lus module:
- KAUJ RUAM 1. Tshawb xyuas cov hlua txuas thiab cov ntawv qhia kev sib txuas ntawm kev sib txuas lus thiab kev sib txuas lus module rau kev puas tsuaj. Saib daim duab 36.
- KAUJ RUAM 2. Nias qhov tuav haum rau hauv lub latch module thiab ib txhij tig qhov haum 90 degrees counterclockwise.
- KAUJ RUAM 3. Tso lub module sib txuas lus kom cov kab ntawv sib dhos ua ke, thiab ntxig lub module rau hauv sab laug bay ntawm lub hauv paus raws li qhia hauv daim duab 37. Nias nyuaj heev kom koom nrog cov connectors.
- KAUJ RUAM 4. Thaum thawb lub hookstick, tig lub cuab yeej tuav 90 degrees clockwise (raws li viewed los ntawm lub hauv qab ntawm lub hauv paus) kaw lub latch. Tom qab ntawd, tshem tawm qhov haum.
- J15 - Tsis siv
- J16 – Wi-Fi serial
- J17 – PIB
- J18 – GPS NMEA
J12 - GPS kav hlau txais xov coax los tswj - J11 - Wi-Fi kav hlau txais xov coax los tswj
- J9 - DB9 Connector (yeem) -
- Wi-Fi / GPS board rau xov tooj cua
- J13 - Tsis siv
- J6 - RJ45 Ethernet 2 - Wi-Fi / GPS board rau xov tooj cua
- J1 - RJ45 Ethernet 1 - Wi-Fi / GPS pawg tswj hwm
- J2 - Lub zog
- Blue LED - lub zog rau
- Amber LED - UP mem tes
- Yellow LED - bootup mem tes
Interface Pinouts
RS-232 Xov tooj cua Maintenance Chaw nres nkoj ntawm R3 kev sib txuas lus module tau teeb tsa raws li cov ntaub ntawv-qhov chaw nres nkoj. Saib daim duab 38 ntawm nplooj 21 thiab daim duab 39.
R3 Kev Sib Txuas Lus Module Ethernet cov chaw nres nkoj siv RJ-45 txuas nrog cov pinout qhia hauv daim duab 40. Lawv pib-sensing rau kev xa tawm thiab txais cov kab (tsis muaj cov kab sib txuas uas yuav tsum tau) thiab pib sib tham rau 10-Mbps lossis 100-Mbps cov ntaub ntawv tus nqi, raws li xav tau los ntawm cov khoom siv txuas nrog. 
Cov kab kos duab
Cov ntaub ntawv / Cov ntaub ntawv
 |
SandC R3 Kev Sib Txuas Lus Module Retrofit thiab Configuration [ua pdf] Phau ntawv qhia R3 Kev Sib Txuas Lus Module Retrofit thiab Configuration, R3, Kev Sib Txuas Lus Module Retrofit thiab Configuration, Module Retrofit thiab Configuration, Retrofit thiab Configuration, Configuration |
