36 Hudson Rd
I-Sudbury MA 01776

800-225-4616
www.tisales.com
I-ProCoder™
Umhlahlandlela Wokufaka Ngokushesha

Incazelo Yomkhiqizo

I-ProCoder™ iyirejista yesifaki khodi se-elekthronikhi edizayinelwe ukusetshenziswa nohlelo lwe-Neptune ® Automatic Reading and Billing (ARB). Le rejista isebenza ne-Neptune R900 ® kanye ne-R450™ Meter Interface Units (MIUs), ihlinzeka ngezici ezithuthukile njengokuvuza, t.amper, nokutholwa kokubuyela emuva.
Ngerejista ye-ProCoder, bobabili umnikazi wendlu kanye nensizakalo bangasebenzisa izici ezilandelayo:

• I-Mechanical wheel bank ukuze ufunde ngokuphelele
• Amadijithi ayisishiyagalombili okukhokha
• Shanela isandla ukuze uthole ukugeleza okuphansi ngokwedlulele kanye nezinkomba zokugeleza kwamanzi okuqondisayo

Umfanekiso 1: ProCoder™ Dial Face with Sweep Hand

Lo mhlahlandlela ukusiza ukuthi uhlonze futhi ufunde ulwazi oluboniswe kurejista ye-ProCoder. Ikusiza futhi ukuthi ubone izimbangela ezivamile zokuvuza futhi ikufundise ukuthi wenzeni uma ukutholile. Lo mhlahlandlela uqukethe izinyathelo zokunquma ukuthi ukuvuza kuyalungiswa yini ngemva kokulungiswa.

I-Wiring Inside Set Version

Ukuze usebenzise ikhebula lamakhondatha amathathu ukusuka kurejista ye-ProCoder™ iye ku-MIU, qedela izinyathelo ezilandelayo.

1. Xhuma intambo yamakhondatha amathathu kumatheminali erejista yesifaki khodi njengoba kuchazwe emiyalweni yomkhiqizi, usebenzisa le khodi yombala:
   • Okumnyama / B
   • Okuluhlaza / G
   7 Okubomvu / R
2. Susa ikhava yetheminali nge-screw driver ekhanda eliyisicaba.
   Umfanekiso 2: Ukukhipha Ikhava Yetheminali
3. Xhuma irejista yesifaki khodi esinemibala efanele.
4. Hlola izintambo ukuze uqinisekise okufundiwe.
   Umfanekiso 3: Izintambo ezinombala ofanele
   
5. Hambisa ucingo njengoba kukhonjisiwe.
   Umfanekiso 4: Ukuhambisa ucingo
6. Faka i-Novagard G661 noma i-Down Corning #4 kuzikulufu zetheminali nezintambo ezingenalutho.
   Umfanekiso 5: Ukusebenzisa Inhlanganisela

I-Neptune incoma i-Novagard G661 noma i-Dow Corning Compound #4.

I-Novagard ingabangela ukucasuka kwamehlo nesikhumba. Uma ugwinyile, ungabangeli ukuhlanza; nciphisa ngengilazi eyodwa kuya kwezimbili zamanzi noma ubisi futhi ufune usizo lwezokwelapha. Sicela ubhekisele ku:

• I-MSDS Novagard Silicone Compounds & Grease Inc. 5109 Hamilton Ave. Cleveland, OH 44114 216-881-3890.
• Ukuze uthole amakhophi amashidi e-MSDS, shayela Usekelo Lwekhasimende Le-Neptune kokuthi 800-647-4832.

3. Beka ikhava yetheminali kurejista, uqinisekise ukuthi ucingo luhanjiswa ngendlela yokukhululeka.	Umfanekiso 6: Ukufaka Ikhava Kurejista
4. Thinta ikhava yetheminali endaweni ngokucindezela inkinobho umcibisholo obunjiwe.	Umfanekiso 7: Ukuhlwitha Ikhava endaweni

Ukufaka izintambo ku-Pit Set Version

Ukuze uxhume inguqulo yesethi yomgodi, qedela izinyathelo. Umfanekiso 5 ubonisa izingxenye ezidingekayo ukuze kufakwe.

Umfanekiso 8: Izingxenye Zokufaka

1. Bamba i-Scotchlok™ phakathi komunwe wokukhomba nesithupha ngekepisi elibomvu ebheke phansi.	Umfanekiso 9: Isixhumi se-Scotchlok
2. Thatha ucingo olulodwa olumnyama olungakhishiwe ku-pigtail kanye nolunye ku-receptacle / MIU bese ufaka izintambo kusixhumi se-Scotchlok uze uhlale ngokugcwele.	Umfanekiso 10: Ukuhlalisa Izintambo Zokuxhuma

Ungahlubuki i-insulation enombala ezintanjeni noma ukuhlubula futhi usonte izintambo ezingenalutho ngaphambi kokufaka isixhumi.
Faka izintambo ezinemibala engaboshiwe ngqo kusixhumi se-Scotchlok.

3. Beka isixhumi ikepisi ebomvu ohlangothini phansi phakathi kwemihlathi ithuluzi crimping. Bheka kuThebula 2 ekhasini 12 ukuthola izinombolo eziyingxenye.	Umfanekiso 11: Ithuluzi Le-Crimping
4. Hlola ukuze uqiniseke ukuthi izintambo zisahlezi ngokugcwele kusixhumi ngaphambi kokubopha isixhumi. Umfanekiso 12 ukhombisa ukuxhumana okungalungile ngenxa izintambo zingahlali ngokugcwele.	Umfanekiso 12: Ukuxhumana Okungalungile

5. Cindezela isixhumi ngokuqinile ngethuluzi elifanele lokukhuhla kuze kube yilapho uzwa i-pop nejeli iphuma ekugcineni kwesixhumi.
6. Phinda izinyathelo 1 kuye ku-5 ngocingo ngalunye lombala. Bheka Ithebula 1 ekhasini 7 ukuze uthole ukumiswa kwezintambo ukuze uxhume ama-MIU ku-ProCoder.

Ithebula 1: Amakhodi Ombala Wezintambo

I-MIU Wire Color/Encoder Terminal	Uhlobo lwe-MIU
Okumnyama / B Okuluhlaza / G Okubomvu / R	• R900 • R450
Mnyama / G Okuluhlaza / R Okubomvu / B	Inzwa
Mnyama / B Emhlophe / G Ebomvu / R	I-Iron
Mnyama / G White / R Obomvu / B	U-Aclara
Mnyama / G Okuluhlaza / B Okubomvu / R	magpie
Mnyama / G Okuluhlaza / R Okubomvu / B	Ibheja

7. Ngemva kokuxhuma zonke izintambo ezinemibala emithathu, funda irejista yesifaki khodi ukuze uqinisekise ukuxhumana okufanele, kanye nesitsha/i-MIU ukusebenza kahle.	Umfanekiso 13: Izintambo Ezinemibala Ezintathu Zixhunyiwe
8. Thatha womathathu ama-Scotchlok axhunyiwe uwaphushele phakathi ithubhu le-splice kuze kube yilapho limbozwe ngokugcwele ngamafutha we-silicone.	Umfanekiso 14: I-Splice Tube
9. Hlukanisa izintambo ezimpunga, futhi ubeke ezindaweni ezikuso ohlangothini ngalunye i-splice tube.	Umfanekiso 15: Izintambo Ezimpunga ku-Slot
10. Thinta ikhava ivaliwe ukuze uqedele ukufaka.	Umfanekiso 16: Ikhava endaweni

Imiyalo yokufaka ye-Networked Receptacle / Dual Port MIUs

Ama-MIU angu-R900 v4 athuthukisiwe awakwazi ukusebenzisa izimbobo ezimbili. Le miyalo isebenza kuphela kuma-v3 MIUs.
I-Dual Port R900 kanye ne-R450 MIUs isebenza namarejista e-Neptune ProRead™, E-CODER, kanye ne-ProCoder. Irejista ngayinye kufanele ihlelwe ngemodi ye-RF Network ngaphambi kokufakwa.®

• Amarejista e-E-CODER kanye ne-ProCoder awakwazi ukuhlelwa ngenkathi exhunywe ndawonye kunethiwekhi. Irejista ngayinye kufanele ihlelwe ngokwehlukana ngaphambi kokwenza uxhumano lwenethiwekhi.
• Amagama athi HI kanye ne-LO amagama e-Neptune okugeleza okuphezulu (HI) noma uhlangothi lwe-turbine lwenhlanganisela, kanye nokugeleza okuphansi (LO) noma uhlangothi lwediski lwenhlanganisela.
• Izilungiselelo zingasetshenziswa futhi ukukhomba amamitha ayisisekelo (HI) nawesibili (LO) ohlelweni lokusebenza olusethelwe kabili.

Ukuhlela Irejista ye-HI
Ukuze uqedele lezi zinyathelo ezilandelayo, sebenzisa i-Neptune Field Programmer ukuze ukhethe ithebhu yoHlelo lwe-ProRead yokuhlela.

Umfanekiso 17: Irejista ye-HI

1. Khetha ifomethi ye-RF Compound HI.
2. Qondanisa Ukuxhumana 2W.
3. Qondanisa Ikhodi Yokudayela 65.
4. Thayipha i-ID yerejista efanele.
5. Hlela irejista.
6. Funda noma ubuze irejista ukuze uqinisekise ukuhlela okulungile. Bheka Umfanekiso 17.

Ukuhlela Irejista ye-LO
Sebenzisa i-Neptune Field Programmer ukuze ukhethe ithebhu Yohlelo Lwe-ProRead yokuhlela.

Umfanekiso 18: Irejista yeLO

1. Khetha ifomethi ye-RF Compound LO.
2. Qondanisa Ukuxhumana 2W.
3. Qondanisa Ikhodi Yokudayela 65.
4. Thayipha i-ID yerejista efanele.
5. Hlela irejista.
6. Funda noma ubuze irejista ukuze uqinisekise ukuhlela okulungile.

Amarejista Anenethiwekhi Yezintambo

Qedela izinyathelo ezilandelayo ukuze uxhume amarejista enethiwekhi.

1. Xhuma intambo yombala ngamunye nentambo yombala efanele evela ku-pigtail kanye namarejista womabili, kuze kube yilapho yomithathu imibala isixhumeke ngempumelelo. Bheka Umfanekiso 19.
   Umfanekiso 19: Ukuxhumana Kwezindawo Ezifana Nazo
   • Susa noma iyiphi intambo engenalutho noma engafakwanga. Qiniseka ukuthi ufaka izintambo ezivalekile kuphela kusixhumi se-splice.
   • Qaphela ukuhleleka okufanele lapho ufaka izintambo kumarejista ukuze wonke amatheminali axhunywe nezintambo ezinombala ofanayo: obomvu, omnyama, noma oluhlaza.
2. Qhubekela kwesithi “Indlela Yokufunda” ekhasini 13.

Crimping Tool Manufacturers

Ukuze usebenzise izixhumi ze-Scotchlok™, i-Neptune idinga ukusetshenziswa kwethuluzi elifanele lokuklwebha. Ithebula 2 libonisa uhlu lwabakhiqizi abahlukahlukene nezinombolo zamamodeli.
Ukuze unciphise ukukhathala, sebenzisa ithuluzi phakathi kweqembu ngalinye lokuhlanganisa eline-advan ewumshini ephezulu kakhulutage kukhonjiswe phakathi kwabakaki ( ).

Ithebula lesi-2: Amathuluzi Afanele Wokugaxa

Umkhiqizi	Inombolo Yemodeli Yomkhiqizi
3M	E-9R (10:1) — Ukuze unciphise ukukhathala, sebenzisa ithuluzi phakathi kweqembu ngalinye lokuhlanganisa elinemishini ephakeme kakhulutage kukhonjiswe phakathi kwabakaki ( ). I-E-9BM (10:1) I-E-9C/CW (7:1) E-9E (4:1) E-9Y (3:1)
Amathuluzi Eclipse	100-008

Ukusetshenziswa kwamapulangwe avamile noma izingidi zamashaneli akukhuthazwa kakhulu ngoba azisebenzi ngisho nokucindezela futhi kungaholela ekuxhumekeni okungalungile.

Ifundwa kanjani

Kubalulekile ukujwayelana nolwazi olutholakala kurejista.

Umfanekiso 20: Ukufunda i-ProCoder™

Umfanekiso 21: I-ProCoder™ Shanela Isandla

Isandla sokushanela esibucayi sinikeza ukumelwa okubonakalayo kokugeleza okuphansi kakhulu kanye nokuhlehla. Kuya ngosayizi nohlobo lwe-ProCoder™
rejista, isiphindaphinda esithile sikhona. Lesi siphindaphindayo, kanye nendawo yamanje yesandla sokushanela, sinikeza amadijithi engeziwe okulungiswa awusizo ngokukhethekile ekuhloleni.

Ukuze uthole ulwazi olwengeziwe ngokufunda isandla sokushanela se-ProCoder, bheka Idokhumenti Yokusekela Umkhiqizo enesihloko esithi Uyifunda Kanjani Irejista ye-Neptune ProCoder.

Izimbangela Ezivamile Zokuvuza

Ukuvuza kungabangelwa izimo ezihlukahlukene. Ukukusiza kangcono ukukhomba ukuvuza okungenzeka, Ithebula 3 liqukethe izimbangela ezivamile zokuvuza.

Ithebula 3: Okungenzeka Ukuvuza

Isizathu Esingenzeka Sokuvuza	Ngesikhashana Ukuvuza	Ukuvuza Okuqhubekayo
Ngaphandle kukampompi, ingadi noma uhlelo lokufafaza luyavuza
I-valve yasendlini yangasese ayivalwanga kahle
Ukugijima kwendlu yangasese
Umpompi ekhishini noma ezindlini zokugezela uyavuza
I-ice maker iyavuza
Ipayipi le-soaker liyasetshenziswa
Vuza phakathi kwemitha yamanzi nendlu
Ukuvuza komshini wokuwasha
Umshini wokuwasha izitsha uyavuza
Ihitha yamanzi ashisayo iyavuza
Igceke lokunisela isikhathi esingaphezu kwamahora ayisishiyagalombili
Ukuphakela kwezilwane ezifuywayo okuqhubekayo
I-air conditioner epholile ngamanzi noma iphampu yokushisa
Ukugcwalisa i-swimming pool
Noma yikuphi ukusetshenziswa okuqhubekayo kwamanzi amahora angama-24

Ungasho Kanjani Uma Amanzi Asetshenziswa

Ukuze unqume ukuthi amanzi ayasebenza yini, qedela lezi zinyathelo ezilandelayo.

1. Bheka isandla sokushanela esiwumshini.
2. Nquma ukuthi yiziphi izimo ezilandelayo ezikhona.

Ithebula 4: Ukunquma ukuthi Amanzi Ayasetshenziswa

Uma…	Bese...
Isandla sokushanela sihamba kancane sibheke ngakwewashi	Amanzi ahamba kancane kakhulu
Isandla sokushanela sihamba ngokushesha	Amanzi ayagijima
Isandla sokushanela asinyakazi	Amanzi awahambi
Isandla sokushanela sihamba ngokuphambene newashi	Ukugeleza emuva kuyenzeka

Okufanele Ukwenze Uma Kukhona Ukuvuza

Bheka uhlu lokuhlola olulandelayo uma kukhona ukuvuza.

Ithebula 5: Uhlu Lokuhlola Ukuvuza

	Hlola bonke ompompi ukuthi bangavuza yini.
	Hlola zonke izindlu zangasese namavalvu ezindlu zangasese.
	Hlola umenzi weqhwa nesikhithi samanzi.
	Bheka igceke kanye nezindawo ezizungezile ukuthi kunendawo emanzi noma inkomba yokuvuza kwepayipi.

Uma Ukuvuza Okuqhubekayo kulungiswa

Uma ukuvuza okuqhubekayo kutholwa futhi kulungiswa, qedela lezi zinyathelo ezilandelayo.

1. Ungasebenzisi amanzi okungenani imizuzu eyi-15.
2. Hlola isandla sokushanela.
   Uma isandla sokushanela singanyakazi, khona-ke ukuvuza okuqhubekayo akusenzeki.

Uma Ukuvuza Kwesikhashana Kulungiswa

Uma ukuvuza kwezikhawu kutholwa futhi kulungiswa, qedela lezi zinyathelo ezilandelayo.

1. Hlola isandla sokushanela ngemva kwamahora okungenani angu-24. Uma ukuvuza kulungiswe kahle, isandla sokushanela asinyakazi.
2. Bheka ithebula elilandelayo elichaza imisebenzi ejwayelekile yamafulegi e-ProCoder™.

Ithebula 6: Amafulegi e-ProCoder™
(Uma uxhumeke ku-R900 ® MIU)

Ifulegi le-Backflow (Isethwa Kabusha Ngemva kwezinsuku ezingu-35)
Ngokusekelwe ekuhambeni kokuhlehla kwedijithi yesishiyagalombili, idijithi yesishiyagalombili iyahlukahluka ngokusekelwe kusayizi wemitha.

Ifulegi le-Backflow (Isethwa Kabusha Ngemva kwezinsuku ezingu-35)
Ngokusekelwe ekuhambeni kokuhlehla kwedijithi yesishiyagalombili, idijithi yesishiyagalombili iyahlukahluka ngokusekelwe kusayizi wemitha.
Awukho umcimbi wokubuyela emuva	Idijithi yesishiyagalombili ihlehliswe ngaphansi kuka idijithi eyodwa
Ukubuyela emuva okuncane umcimbi	Idijithi yesishiyagalombili ibuyisele emuva ngaphezulu kunedijithi eyodwa kufika ku-100 izikhathi zedijithi yesishiyagalombili
Ukubuyela emuva okukhulu umcimbi	Idijithi yesishiyagalombili ihlehlisiwe kakhulu kunezikhathi eziyi-100 kwesishiyagalombili idijithi
Umaka Wesimo Sokuvuza
Ngokusekelwe enanini eliphelele lezikhathi eziyimizuzu engu-15 ezirekhodwe esikhathini samahora angama-24 sangaphambilini.
Akukho ukuvuza	Idijithi yesishiyagalombili ikhule kancane kunemizuzu engama-50 kwengama-96 eyi-15 izikhawu
Ukuvuza okungapheli	Idijithi yesishiyagalombili ikhuphuke ngo-50 kwezikhawu zemizuzu engu-96 15
Ukuvuza okuqhubekayo	Idijithi yesishiyagalombili inyuswe kukho konke kwezikhawu zemizuzu engu-96 15
Izinsuku Ezilandelanayo Ngefulege Lokusetshenziswa Kweziro (Isethwa Kabusha Ngemva kwezinsuku ezingu-35)
Inombolo yezinsuku isimo sokuvuza besinani eliphansi

Ulwazi lokuxhumana

E-United States, Ukusekela Kwekhasimende LakwaNeptune kuyatholakala kusukela ngoMsombuluko kuya kuLwesihlanu, 7:00 AM kuya ku-5:00 PM Isikhathi Esivamile Esivamile, ngocingo, i-imeyili, noma ifeksi.

Ngefoni
Ukuze uxhumane Nokwesekwa Kwekhasimende Lakwa-Neptune ngocingo qedela lezi zinyathelo ezilandelayo.

1. Shaya ucingo 800-647-4832.
2. Khetha okukodwa kokulandelayo:
   • Cindezela u-1 uma unokusekela Kobuchwepheshe
   Inombolo kamazisi yomuntu siqu (i-PIN).
   • Cindezela u-2 uma ungenayo i-PIN Yokusekela Ubuchwepheshe.
3. Faka i-PIN enamadijithi ayisithupha bese ucindezela #.
4. Khetha okukodwa kokulandelayo:
   • Cindezela u-2 ukuze uthole Usekelo Lobuchwepheshe.
   • Cindezela u-3 ukuthola izinkontileka zokulungisa noma ukuvuselela.
   • Cindezela u-4 ukuze uthole Ukugunyazwa Kwezinto Zokubuyiswa (RMA) Kuma-Akhawunti E-Canadian.

Uqondiswe ethimbeni elifanele Lochwepheshe Bokusekela Amakhasimende. Ochwepheshe bazinikele kuwe kuze kube yilapho inkinga isixazululiwe kuwe
ukwaneliseka. Lapho ushaya ucingo, zilungiselele ukunikeza ulwazi olulandelayo.

• Igama lakho nesisetshenziswa noma igama lenkampani.
• Incazelo yalokho okwenzekile nokuthi ubuwenzani ngaleso sikhathi.
• Incazelo yanoma yiziphi izinyathelo ezithathiwe ukulungisa inkinga.

Ngefeksi
Ukuze uxhumane Nokwesekwa Kwekhasimende Lakwa-Neptune ngefeksi, thumela incazelo yenkinga yakho ku 334-283-7497.
Sicela ufake eshidini lekhava yefeksi isikhathi esingcono kakhulu sosuku ukuze uchwepheshe wosekelo lwamakhasimende axhumane nawe.

Nge-imeyili
Ukuze uxhumane Nokwesekwa Kwamakhasimende we-Neptune nge-imeyili, thumela umlayezo wakho ku- support@neptunetg.com.

Inkampani Neptune Technology Group Inc.
1600 Alabama Highway 229 Tallassee, AL 36078
I-USA Ucingo: 800-633-8754
Ifeksi: 334-283-7293

Ku-inthanethi
www.neptunetg.com

I-QI ProCoder 02.19 / Ingxenye No. 13706-001
©Copyright 2017 -2019
Inkampani Neptune Technology Group Inc.

Amadokhumenti / Izinsiza

Irejista ye-ProCoder Encoder kanye ne-Endpoint Radio Frequency Meter [pdf] Umhlahlandlela wokufaka Irejista ye-ProCoder Encoder kanye ne-Endpoint Radio Frequency Meter, Register kanye ne-Endpoint Radio Frequency Meter, Endpoint Radio Frequency Meter, Radio Frequency Meter, Frequency Meter, ProCoder, Meter

Izithenjwa

• Imaniwali yosebenzisayo