IZIXHOBO EZANDI CL-16 Umphezulu woLawulo lweFader yoMda

INTSHAYELELO

Wamkelekile kwi-CL-16

I-CL-16 Linear Fader Control Surface ye-8-Series idibanisa ukulula kwe-analog consoles yendabuko kunye namandla kunye nokuguquguquka kwezixhobo zedijithali. Lo mphezulu wolawulo we-bespoke uphucula amava okuxuba esekwe kwinqwelo kunye nokusebenza kwayo okuqondakalayo, iifada ezili-16 ezigudileyo, iitrim ezili-16 ezizinikeleyo, kunye ne-LCD ezukileyo yepanoramic. Konke oku kubunjineli bobuchule obuyi-16.3”-wide compact unit ehambelana nenqwelo kwaye isebenza ukusuka kwi-12 V DC.

• Iyahambelana ne833, 888, kunye neScorpio
•  I-16 yolawulo lwe-rotary trim ezinikeleyo
•  16 iifaders ezizinikeleyo
•  Ifilosofi yoyilo enengqondo apho amajelo 1-16 anikezelweyo, ulawulo olungasebenzisi bhanki njengekhonsoli ye-analog yemveli, kunye nezinye izinto ezibalulekileyo zinokufikelelwa ngokukhawuleza.
•  I-32 yemisebenzi emininzi yolawulo lwe-rotary ye-EQ, i-pan, i-channel 17-32 inzuzo, iinzuzo zebhasi, iinzuzo zemveliso, kunye nokunye.
•  Iscreen seLCD esikhulu, esifundeka kukukhanya kwelanga siyagotywa ukuze kube lula kwaye kukhuseleke ukugcinwa kunye nokuthuthwa
•  Ukuthembeka okuphezulu okutsha, amaqhosha athuleyo, athambileyo kwimisebenzi ephambili efana nerekhodi, ukumisa, imetadata, iicoms, ukubuyiswa, nokunye.
•  Amaqhosha amahlanu anokwabiwa ngumsebenzisi
• Eyakhelwe-ngaphakathi i-5-port ye-USB hub ene (ezimbini USB-C kunye ne-USB-A ezintathu) yezitshixo, ithebhulethi ye-SD-Remote, kunye nezinye iiperipherals ze-USB
•  1/4” kunye ne-1/8” ii-headphone jacks
•  Isidibanisi esikude se-10-Pin yocingo lwesiko lwee-LED kunye nokutshintsha, kunye ne-1/4" yonyawo lokunyathela igalelo
•  Iqhagamshela nge-USB-B
•  I-12 V DC-inikwe amandla nge-4-pin XLR (ayiqukwanga)
•  I-16 etyibilikayo etyibilikayo kakhulu uPenny & Giles 100 mm iifaders ezimngcelele-ezona ziziva zifader kwimarike
•  Ufikelelo lwephaneli esezantsi ekhawulezayo yenkonzo yasendle yeefaders

Iphaneli Views

PHEZULU

1.  IPENNY & GILES FADERS
   Ukulungelelanisa amanqanaba e-fader kumajelo 1-16. -Inf ukuya +16 dB uluhlu lwefader. Iinzuzo zeFader ziboniswa kwi-LCD.
2.  PFL/SEL TOGLE ITSHINTSHI
   Ukuhambisa i-toggle ukuya ekhohlo, i-PFL itshaneli ekhethiweyo okanye ibhasi yodwa xa ikwiNdlela yeBhasi. Ukuhambisa uguqulelo uye ekunene ukhetha imowudi yokumisela isitishi (esaziwa njengetshaneli yeFAT) okanye ukhethe ibhasi ethumela kwimowudi yeefaders xa ikwiMowudi yeBhasi.
3.  NQABA/IZIMBEYI ZOKUTHULISA W/I-LEDs
   Jikelezisa ukuze ulungelelanise i-trim inzuzo yetshaneli 1-16. Iinzuzo zokunquma ziboniswa kwi-LCD. Cinezela ngelixa ubambe i-Menu ukuze ucime/ungathuli amajelo 1-16. Ii-LED ezijikelezayo zibonelela ngembonakalo yenqanaba lesiginali yeshaneli, i-PFL, isimumu, kunye nenqanaba lengalo.
   •  Ubunzulu obuguquguqukayo obuluhlaza, tyheli/orenji, kunye nobomvu kumgangatho wophawu, umsebenzi wangaphambi/ngeposi uphele kunye nokunqunqa ngokulandelelanayo.
   •  Ukudanyazela tyheli = itshaneli PFL'd.
   •  Blue = itshaneli ithulisiwe
   •  Obomvu = umjelo oxhobileyo.
4. PHAKATHI UMGQIBELO AMAQHUMANA AMANDLA OKUSEBENZA W/RENGA II-LED
   I-Rotary/cofa amaqhosha anemisebenzi emininzi ngokuxhomekeke kwindlela ekhethiweyo. Amaxabiso kunye nobume buboniswa kumqolo wesibini weLCD. Jikelezisa okanye ucinezele ukulungisa okanye ukuguqula iiparamitha ezahlukeneyo. Iringi ye-LEDs ejikelezileyo ibonisa ulwazi oluhlukeneyo lobume
5. UMGQOLO OPHAKAMILEYO AMAQHUBA OKUSEBENZA OKUNINGI W/I-LEDs.
   I-Rotary/cofa amaqhosha anamandla amaninzi ngokuxhomekeke kwindlela ekhethiweyo. Amaxabiso kunye nobume buboniswe kumqolo ongasentla we-LCD. Jikelezisa okanye ucinezele ukulungisa okanye ukuguqula iiparamitha ezahlukeneyo. Iringi ye-LEDs ejikelezileyo ibonisa ulwazi oluhlukeneyo lobume
6. MIMA IQHOSHA
   Iyayeka ukurekhoda okanye ukudlala kwakhona. Ukucofa Misa ngelixa uyekile ukutshintsha ukubonisa igama elilandelayo lokuthabatha kwi-LCD ukuze lihlelwe kunye neSiceni, Thatha, amaqhosha amaqhosha.
7.  IBHODI YEREKHODI
   Iqala ushicilelo olutsha. Ikhanyisa ebomvu xa irekhoda.
8.  AMAQHOSHA EMODE
   Ikhetha iindlela ezahlukeneyo ukumisela ukuba zeziphi iimitha kunye nolunye ulwazi oluboniswa kwi-LCD kunye nomsebenzi woluhlu oluphezulu noluphakathi amaqhina emisebenzi emininzi kunye nokutshintsha kwe-PFL/Sel.
9.  METADATA AMAQHHUBA
   Amaqhosha amfutshane okuhlelwa ngokukhawuleza kwemetadata. Hlela umboniso, Thatha kunye neeNqaku zangoku okanye ezilandelayo. Yandisa igama lomboniso, isangqa uthabathe okanye ucime ushicilelo lokugqibela (Ububuxoki).
10.  AMAQHOSHA ABEKWE UMSEBENZISI
    Umsebenzisi-mapable kwimisebenzi eyahlukeneyo yofikelelo olukhawulezayo imisebenzi ekwiMaphu iboniswe ngasentla kwi-LCD
11. UKUBUYELA AMAQHOSHA
    Amaqhosha anikezelweyo okubeka iliso kwiimbuyekezo ezahlukeneyo kwii-headphones
12.  COM THUMELA Amaqhosha
    Cofa ukuze uthethe. Iindlela zesileyiti esikhethiweyo semic ukuya kwindawo eziqwalaselweyo kwi Com Thumela iimenu zokuJonga.
13.  IQHOSHA LEMETER
    Cofa ukubuyela kwi-LCD yekhaya ehlala ikho view kunye nokusetwa kwangaphambili kweHP yangoku. Kwakhona iphinda-phinda ukusebenza kweqhosha le-Meter kwi-8-Series front panel.
14.  IIMENYANA
    Iphinda imisebenzi eyabelweyo yeqhosha leMenu kwiqela lenjongo engaphambili le-8-Series. Bamba uze ucinezele imbiza yokucheba yetshaneli ukuthulisa elo jelo. Ikwasetyenziselwa ukuthulisa iibhasi kunye neziphumo kwiimodi ezifanelekileyo
15.  ITSHINTSHA
    Iphinda imisebenzi eyabelweyo yokutshintsha ezintathu zokutshintsha ngezantsi kwe-8-Series yepaneli yangaphambili ye-LCD.
16.  IQHUBA LE-HEAD
    Iphinda imisebenzi ye-headphone knob kwi-8-Series front panel LCD. Kwi-Scorpio, bamba ngelixa ucofa iqhosha le-Com Rtn ukuze uvule/ucime ujongo lwe-Com Rtn 2 kwii-headphones. Cinezela xa isitishi okanye ibhasi ibekwe yodwa ukutshintshela kuseto lwangoku lwe-headphone. Bamba ngexesha lokudlala ukufaka imowudi yokukhuhla umsindo.
17.  KHETHA IQHUBA
    Iphinda imisebenzi yeqhosha lokukhetha kwiqela le-LCD le-8-Series ngaphambili.
18.  I-LCD EFUNDA UKUKHANYA NGELANGA
    Umboniso wombala oqaqambileyo wemitha, iiparamitha, iindlela, ezothutho, ikhowudi yexesha, imethadatha kunye nokunye. Ukuqaqamba kweLCD kumiselwe kwiMenu> Izilawuli>CL-16>I-LCD yokuKhanya kwemenyu.

PHANTSI

BUYELA

PHAMBILI

LCD BONISA

1.  UMROWO OMPHEZULU IQHUBA INKCAZELO
   Ichaza umsebenzi wemisebenzi emininzi yamaqhosha olawulo kumqolo ongentla. Umsebenzi uyatshintsha ngokuxhomekeke kwimo ekhethiweyo.
2.  PHAKATHI KOKUROW O IQHUBA INKCAZO
   Ichaza umsebenzi wamaqhina olawulo omqolo ophakathi anemisebenzi emininzi. Umsebenzi uyatshintsha ngokuxhomekeke kwimo ekhethiweyo.
3.  IMIDLALO YOMQOLO OPHAKATHI
   Ibonisa idatha echaphazelekayo kwitshaneli nganye okanye ibhasi ngokuxhomekeke kwiiparamitha ezihlengahlengiswayo kusetyenziswa amaqhosha omqolo ophakathi njengePan, Ukulibaziseka, i-HPF, i-EQ, i-Ch 17-32, i-Bus Gains, i-Bus Routing, i-Bus Thumela, i-FAT Channel Parameters kunye nokunye.
4.  IINDABA ZOKUROWU PHEZULU
   Ibonisa idatha echaphazelekayo kwitshaneli nganye, ibhasi, okanye imveliso ngokuxhomekeke kwiziphi iiparamitha ezihlengahlengiswayo kusetyenziswa amaqhosha omqolo aphezulu njengeGains Output, HPF, EQ, Gain Gain, Bus Routing, Bus Sends, FAT Channel Parameters kunye nokunye.
5.  INDAWO YOLWAZI OLUPHAMBILI
   Ibonisa ulwazi olwahlukeneyo olubandakanya ukulinganisa kwe-LR, izixhobo zokubala zexesha, imetadata, nokunye. Umbala ongasemva uyatshintsha ngokuxhomekeke kwimeko yothutho ngolu hlobo lulandelayo:
   • Imvelaphi ebomvu = ukurekhoda
   • Imvelaphi emnyama = iyekile
   • Imvelaphi eluhlaza = ukudlala
   • Imvelaphi eluhlaza edanyazayo = kumisiwe ukudlala kwakhona
   • Imvelaphi eluhlaza okwesibhakabhaka = FFWD okanye REW
6.  EZINGUNDOQO LR MIX IIMETHA
   Ibonisa i-LR ibhasi yokuxuba iimitha eziphambili kunye nesimo sabo sengalo yerekhodi.
7.  THATHA IGAMA
   Bonisa kwaye uhlele iGama langoku lokuThatha. Cinezela Misa ngelixa umile ukubonisa igama lokuthatha elilandelayo.
8.  IGAMA LENDAWO
   Bonisa kwaye uhlele igama leNdawo yangoku. Cinezela Misa ngelixa umile ukubonisa igama leSicelo esilandelayo.
9.  THATHA INANI
   Bonisa kwaye uhlele inombolo yangoku Thatha. Cinezela Misa ngelixa umile ukubonisa inombolo elandelayo Thatha.
10.  AMANQAKU
    Bonisa kwaye uhlele inombolo yamanqaku kaThatha yangoku. Cinezela Misa ngelixa umile ukubonisa amanqaku alandelayo Thabatha.
11.  AMAQHUBA OMSEBENZI 1-5 INKCAZELO
    Ibonisa amagama eendlela ezimfutshane eziboniswe kwi-U1 - U5 amaqhosha.
12.  TIMECODE COUNTER
    Ibonisa ikhowudi yexesha langoku ngexesha lokurekhoda kunye nokuyeka kunye nekhowudi yexesha lokudlala ngexesha lokudlala.
13.  ABSOLUTE AND ESELE IXESHA COUNTER
    Imiboniso edlulileyo ithatha ixesha ngexesha lokurekhoda kunye nokudlala. Ngexesha lokudlala, ixesha eliseleyo lokuthatha liboniswa emva kwe '/'.
14.  UMGANGATHO WEFREYIMU
    Ibonisa ireyithi yesakhelo sekhowudi yexesha langoku.
15.  HP PRESET
    Ibonisa umthombo we-HP okhethiweyo ngoku kunye nevolumu ye-HP xa ihlengahlengiswa yi-knob ye-HP.
16.  SYNC/SAMPINQANABA LE
    Ibonisa umthombo wangoku wongqamaniso kunye ne-sampumyinge.
17.  IIMETHA ZOKUBUYELA
    Ibonisa ukulinganisa kwemitha kuzo zombini iitshaneli zophawu ngalunye lokubuya.
18.  IJESHI OKANYE AMAGAMA EBHASI
    Ibonisa igama letshaneli, ukucheba, kunye neenzuzo ze-fader xa viewiimitha zetshaneli. Ibonisa inombolo yebhasi kunye neenzuzo zebhasi xa viewiimitha zebhasi. Le mimandla itshintsha umbala wayo ngolu hlobo lulandelayo:
    •  Imvelaphi emnyama/umbhalo ongwevu = itshaneli icinyiwe
      okanye akukho mthombo ukhethiweyo.
    •  Imvelaphi engwevu/umbhalo omhlophe = itshaneli/ibhasi ivuliwe kwaye yohlulwe izixhobo.
    •  Imvelaphi ebomvu/isicatshulwa esimhlophe = itshaneli/ibhasi ikhwele kwaye ixhobile.
    •  Imvelaphi eluhlaza/omhlophe = itshaneli/ibhasi icinyiwe.
19.  AMASHISHINI ENXAKISIWE
    Iinkalo zoLwazi lweSitishi ziyadityaniswa xa amajelo edityanisiwe.
20.  ISHISHINI OKANYE Iimitha zebhasi
    Ibonisa itshaneli okanye imitha yebhasi ngokuxhomekeke kwimo ekhethiweyo.
21.  UMBALA OWENZAYO CH. IZALATHISI ZEQELA
    Imijelo enesalathiso sombala ofanayo zidityanisiwe. Khetha ukuba ngowuphi umbala osebenzayo kwiqela kwi-CL-16>Umbala weQela lemenyu.
22.  IMITHA VIEW NAME
    • Ibonisa '1-16' xa viewing Channel 1-16 yeemitha
    • Ibonisa '17-32' xa viewing Channel 17-32 yeemitha
    • Ibonisa igama letshaneli xa viewukuba itshaneli FAT
    • Ibonisa 'Iibhasi' xa viewkwiimitha zebhasi
    • Ubonisa Bus No. xa viewkwimowudi yokuthumela ibhasi
23.  QHUBA / AMANDLA INDAWO YOLWAZI
    • Ibonisa i-SSD, i-SD1, kunye ne-SD2 yexesha eliseleyo lokurekhoda.
    • Ibonisa i-8-Series kunye ne-CL-16 umthombo wamandla wezempilo kunye ne-voltage.

Ukuqhagamshela kwi-8-Series Mixer-Recorder yakho

•  Ukusebenzisa i-USB-A enikezelweyo kwi-USB-B intambo, qhagamshela i-8-Series USB-A port kwi-CL-16 USB-B port.
•  Qhagamshela i-8-Series' 1/4” TRS i-headphone out jack kwi-CL-16's 1/4” TRS “To 8-Series Headphone Out” jack usebenzisa intambo oyinikiweyo.
•  Qhagamshela umthombo wamandla we-10-18 V DC usebenzisa i-4-pin XLR (F) kwi-DC Input ye-CL-16. Umthombo wamandla awuqukwanga.
•  Amandla kwi-8-Series Mixer-Recorder. Jonga kwiSikhokelo soMsebenzisi esifanelekileyo se-8-Series kuyo yonke imiyalelo yokusebenza kunye neenkcukacha.

Ukuvula / Vala

•  Amandla kwi-8-Series Mixer-Recorder. Nje ukuba i-8-Series inikwe amandla, iya kuqalisa ngokuzenzekelayo i-CL-16.
•  Ukucima, cofa ngokulula i-8-Series power toggle switch ukuya kwindawo yokucima. I-CL-16 nayo iya kuhla amandla

Ukukhupha i-CL-16 kwi-8-Series

I-CL-16 inokudityaniswa/ikhutshwe kwi-8-Series ngelixa ivuliwe ngaphandle komonakalo kuyo nayiphi na iyunithi. Xa i-CL-16 ikhutshwe, i-"Control Surface Unplugged" iboniswa kwi-8-Series LCD. Akukho manqanaba aya kutshintsha. Kweli nqanaba: Lindela utshintsho lwenqanaba ngesiquphe ukuba abalawuli>ISoft Fader/i-trim Pickup ayivulwanga njengoko amanqanaba omsindo ngoku aya kumiselwa ziitrim kunye neefaders kwi-8-Series.

Ukuhlaziya i-CL-16 Firmware

Xa kuyimfuneko, i-firmware ye-CL-16 ihlaziywa ngokuzenzekelayo xa ihlaziya i-firmware ye-8-Series. Uhlaziyo lwe-firmware ye-PRG ye-8-Series file iqulethe idatha yohlaziyo yazo zombini ii-8-Series kunye ne-CL-16. Xhuma i-CL-16 kwi-8-Series kwaye uqinisekise ukuba zombini zidibaniswe nemithombo yamandla ethembekileyo. Hlaziya i-firmware ye-8-Series usebenzisa inkqubo eqhelekileyo. Ukuba kukho uhlaziyo lwe-firmware ye-CL-16 ekhoyo, iya kuqala ngokuzenzekelayo emva kokuba i-8-Series igqibe inkqubo yayo yokuhlaziya. Iqhosha lokumisa le-CL-16 liya kudanyaza tyheli ngelixa i-CL-16 ihlaziya. Nje ukuba uhlaziyo lwe-CL-16 lugqityiwe, i-combo ye-8-Series/CL-16 iya kuvula amandla kwaye ilungele ukusetyenziswa.

Ukusebenza Kuphelileview

I-CL-16 idibanisa i-paradigm yomgca wesiteshi somxube wendabuko kunye nekhono lemisebenzi emininzi yomxube wedijithali wanamhlanje. Nje ukuba uqhelane nolawulo olwahlukeneyo, iindlela ezahlukeneyo kunye nemitha ehambelana nazo views, ukubanakho okukhulu kwe-8-Series mixer/recorder yakho iya kubonakala. Yonke imisebenzi ye-8-Series (iitshaneli, iibhasi, iziphumo, imethadatha yeemenyu, ii-coms) inokulawulwa kwi-CL-16. Nangona uninzi lolwazi luveziwe kwi-CL-16 LCD, i-8-Series LCD isabonelela ngolwazi oluluncedo xa isenza imisebenzi ethile umz. indlela, ukungena kokubhaliweyo.

• Umtya weSiteshi
  Ulawulo lwetshaneli yephaneli ephezulu kunye neemitha ze-LCD zazo, amagama, kunye namaxabiso alungelelaniswa 'kuluhlu' oluthe nkqo ukuze iliso lihambe ngokwendalo phakathi kolawulo lwetshaneli kunye nokuboniswa.
• I-CHANNEL TRIMS 1-16
  Iingqayi ze-16 ze-trim zinikezelwe ekulungiseni inzuzo ye-trim ye-channel 1-16. Inzuzo yokunquma ayifumaneki kumajelo 17-32. Jikelezisa imbiza yokulungisa ukulungisa ukuzuzwa kwayo kwaye ubonise ixabiso lenzuzo yayo kwi-dB kumqolo ongezantsi we-LCD. Sika imbiza yeringi ye-LEDs ibonisa inqanaba letshaneli (ubungakanani obuguquguqukayo obuluhlaza), umda wetshaneli ngaphambili/ubume besithuba (mthubi/orenji), kunye nokunqunqa (bomvu).
• I-CHANNEL TRIMS 17-32
  Cinezela iBhanki ukutshintshela kwi-Ch 17-32 emva koko ujikelezise iqhosha eliphezulu ukulungisa inzuzo yayo ye-trim kwaye ubonise ixabiso layo lokuzuza kwi-dB kumqolo osezantsi kunye nophezulu we-LCD.
• IJESHI LIYATHUMISA 1-16
  Cinezela imbiza yokucheba ngelixa ubambe iMenu ukuze uthulise/ungathethi amajelo 1-16. Xa uthulisiwe, iringi ye-LED yembiza yokucheba iba luhlaza okwesibhakabhaka.
• IJESHI LIYATHUMISA 17-32
  Cofa iBhanki ukutshintshela kwi-Ch 17-32 emva koko ucinezele iqhosha eliphakathi ngelixa ubambe iMenu ukuthulisa/ukucima amajelo 17-32. Xa uthulisiwe, i-LED yeringi yeqhosha eliphakathi iba luhlaza okwesibhakabhaka.
• ISHISHINI FADERS 1-16
  I-16 ye-Penny kunye ne-Giles i-linear faders izinikele ekulungiseni inzuzo ye-fader yamajelo 1-16. Shelelezisa ifader ukulungisa inzuzo kwaye ubonise ixabiso layo lokuzuza kwi-dB kumqolo ongezantsi weLCD
• ISHISHINI FADERS 17-32
  Ukuxuba amajelo 17-32, cinezela iBhanki ukutshintshela kwi-Ch 17-32 emva koko ujikelezise iqhosha eliphakathi ukuze ulungelelanise inzuzo yayo ye-fader kwaye ubonise ixabiso layo lokuzuza kwi-dB kumqolo ongezantsi kunye nophakathi we-LCD.
• IJESHI PFLS 1-16
  Xa i-Ch 1-16 yeemitha ibonisiwe, hambisa i-toggle ekhohlo ukuya kwitshaneli ye-PFL 1-16. Xa itshaneli engu-1-16 iyi-PFL'd, idityaniswe ne-trim pot ring LED idanyaza tyheli kunye ne-PFL 'n' idanyaza kwibala le-headphone kwiNdawo yoLwazi oluPhambili. Hambisa i-toggle ekhohlo kwakhona okanye ucinezele i-Meter ukurhoxisa i-PFL kwaye ubuyele kucwangciso lwangoku lweHP.
• IJESHI PFLS 17-32
  Xa i-Ch 17-32 yeemitha iboniswa (ngokucinezela ibhanki), hambisa i-toggle ekhohlo kwitshaneli ye-PFL ye-17-32. Xa itshaneli engu-17-32 i-PFL'd, idityaniswe nekhonkco eliphakathi ikhonkco LED idanyaza tyheli kunye ne-PFL 'n' idanyaza kwibala le-headphone kwiNdawo yoLwazi oluPhambili. Hambisa i-toggle ekhohlo kwakhona okanye ucinezele i-Meter ukurhoxisa i-PFL kwaye ubuyele kucwangciso lwangoku lweHP.

Iindlela/Imitha Views

I-CL-16 ineendlela ezahlukeneyo zokusebenza (ezidweliswe ngezantsi). Ukutshintsha imo ye-amn kutshintsha umsebenzi we-multi-function knobs kwaye kwezinye iimeko, tshintsha i-LCD Meter. View. Umsebenzi kunye/okanye ixabiso lamaqhosha emisebenzi emininzi aboniswa kumqolo oPhezulu kunye noPhakathi kumqolo we-LCD amasimi nakwimihlaba yokuchaza kwikona ephezulu ngasekhohlo.

I-CH 1-16 (IMITHA YEKHAYA ESILAWULAYO VIEW) 
Cofa iqhosha leMeter ukuze usoloko ubuyela kule mitha yasekhaya emiselweyo view. Jikelezisa amaqhosha aphezulu ukulungisa iinzuzo zemveliso; cofa kwaye ubambe Imenyu emva koko ucinezele iqhoshana eliphezulu ukucima imveliso ehambelanayo.
CH 17-32 (BANK)
Cofa iqhosha leBhanki. Iqhosha leBhanki liqhwanyaza eluhlaza kunye nemitha view utshintsho kwimvelaphi eluhlaza. Jikelezisa amaqhina aphakathi ukulungisa i-Ch 17-32 inzuzo ye-fader; cofa ngelixa ubambe Imenyu ukuthulisa. Jikelezisa amaqhosha aphezulu ukulungisa iinzuzo ze-Ch 17-32 zetrim. Ukubhankisha kwi-Ch17-32 kunokukhutshazwa ngokuzulazula kubalawuli>CL-16>IBhanki iKhubazekile kwi-On.
I-PAN CH 1-16
Cofa iPan iqhosha xa viewnge Ch 1-16. Iqhosha lePan likhanyisa ipinki. Jikelezisa amaqhina aphakathi ukulungisa i-ch 1-16 pan; cofa amaqhosha kwipani embindini. Indawo ye-pan iboniswa ngebha eblue ethe tye. Jikelezisa amaqhosha aphezulu ukulungisa iinzuzo zemveliso; cofa ngelixa ubambe imenyu ukuthulisa iziphumo.
I-PAN CH 17-32
Cofa iPan iqhosha xa viewnge Ch 17-32. Iqhosha lePan likhanyisa ipinki. Jikelezisa amaqhina aphakathi ukulungisa i-ch 17-32 pan; cofa amaqhosha kwipani embindini. Indawo ye-pan iboniswa ngebha eblue ethe tye. Jikelezisa amaqhosha aphezulu ukulungisa iinzuzo zemveliso; ngelixa ubambe imenyu ukuthulisa iziphumo.
UKULIBAZISA/POLARITY CH 1-16
Cofa iQhosha likaDly. Iqhosha le-Dly likhanyisa ubhlowu okhanyayo. Jikelezisa amaqhina aphakathi ukulungisa i-ch 1-16 ukulibaziseka; cofa amaqhosha ukuguqula ipolarity. Jikelezisa amaqhosha aphezulu ukulungisa iinzuzo zemveliso; cofa ngelixa ubambe imenyu ukuthulisa iziphumo.
I-ARM
Cinezela kwaye ubambe iqhosha leArm (iingalo zinokuguqulwa kuphela xa ubambe iqhosha lengalo). Ibonisa itshaneli 1-16 imeko yengalo kwi-trim pot ring LEDs kunye ne-channel 17-32 isimo sengalo kwi-LED ye-knob ephakathi. Ubomvu uxhobile. Cofa amaqhosha ukuze uguqule ingalo/ukhulule. Kwimowudi yeebhasi (cofa iBhasi), ukucinezela nokubamba Ingalo ibonisa iingalo zebhasi (iBhasi 1, iBhasi 2, iBus L, iBhasi R) kwii-LED zeringi eziphakathi. KwiBhasi iThumela kwimowudi yeeFaders, ukucinezela nokubamba iArm ibonisa zonke iingalo:- Ch 1-16 iingalo kwitrim pot ring LEDs, Ch 17-32 iingalo kwii-LED zeringi ephakathi, kunye neengalo zebhasi kwii-LED zeringi ephezulu.
IMIBALA YESHISHINI
Imibala yesitishi ingasetyenziselwa ukunceda ngokulula ukuchonga kunye nokwahlula phakathi kwemithombo yesitishi. Kwitshaneli nganye 1-32, khetha umbala kubalawuli>- CL-16>Imibala yeChaneli yemenyu. Umbala okhethiweyo usetyenziswa kwimvelaphi yomgca wetshaneli kwaye ubeka ngaphezulu kwemibala emiselweyo yefektri engwevu kwi-ch 1-16 kunye nohlaza ku-ch 17-32. Qaphela: Imibala yesitishi ayiboniswanga kwiBhasi iThumela kwiiFaders view.
IIBHASI
Cinezela ukubonisa iBus 1-10, L, R metres kwi-CL-16 LCD kunye neBus Routing screens kwi-8-series LCD Bus iqhosha likhanyisa ukukhanya okupinki. Jikelezisa amaqhina aphakathi ukulungisa iBus L, R, B1 – B10 master gains; hambisa inguqu ekhohlo kwibhasi yodwa; cofa ngelixa ubambe Imenyu ukuthulisa. Jikelezisa amaqhosha aphezulu ukulungisa iinzuzo zemveliso; cofa ngelixa ubambe iMenu ukuthulisa iziphumo.
IBHASI ITHUMELA KWIFADERS CH 1-16
Cofa iqhosha lebhasi + Sel toggle. Ibhasi ibekwe yodwa kwaye isikrini sayo sokuhamba siboniswa kuluhlu olusi-8 lweLCD. Iqhosha leBus idanyaza ipinki ekhanyayo kunye nemitha view utshintsho kwimvelaphi eluhlaza okwesibhakabhaka. Cinezela amaqhosha aphakathi kwindlela u-Ch 1-16 ukuya kwi-prefade yebhasi (eluhlaza), i-postfade (i-orenji) okanye ngokuthumela inzuzo (ibhlowu ekhanyayo). Xa usetelwe ukuthumela inzuzo, jikelezisa iqhosha eliphakathi ukulungisa inzuzo yokuthumela. Cofa iqhosha leBhanki ukufikelela kwiithumelo zech 17- 32. Jikelezisa amaqhosha aphezulu ukulungisa iinzuzo zeBhasi; cofa amaqhosha aphezulu ukuthulisa iibhasi.
IBHASI ITHUMELA KWIFADERS CH 17-32
Cofa iqhosha lebhasi + Sel toggle xa viewnge Ch 17-32. Ibhasi ibekwe yodwa kwaye isikrini sayo sokuhamba siboniswa kuluhlu olusi-8 lweLCD. Iqhosha leBus idanyaza ipinki ekhanyayo kunye nemitha view utshintsho kwimvelaphi eluhlaza okwesibhakabhaka. Cinezela amaqhosha aphakathi kwindlela u-Ch 17-32 ukuya kwi-prefade yebhasi (eluhlaza), i-postfade (i-orenji) okanye ngokuthumela inzuzo (ibhlowu ekhanyayo). Xa usetelwe ukuthumela inzuzo, jikelezisa iqhosha eliphakathi ukulungisa inzuzo yokuthumela. Cofa iqhosha leBhanki ukufikelela uthumela
Ch 1-16. I-HPF CH 1-16
Cofa kwaye ubambe iqhosha leBhanki emva koko Pan iqhosha. Jikelezisa amaqhina aphezulu ukulungisa i-HPF freq. Cinezela amaqhosha aphakathi ukugqitha i-HPF.
I-EQ LF CH 1-16
Cofa kwaye ubambe iqhosha leBhanki emva koko iqhosha leArm. Jikelezisa amaqhosha aphezulu ukulungisa i-LF freq/Q. Cinezela amaqhoshana aphezulu ukuguqula phakathi kwe-LF freq/Q. Jikelezisa amaqhina aphakathi ukulungisa inzuzo yeLF. Cinezela amaqhosha aphakathi ukugqitha i-LF. Sebenzisa i-Mic toggle ukutshintshela i-LF band phakathi kokuCima/Phambi/Phambi. Sebenzisa iFav toggle ukuguqula iLF band phakathi kwePeak kunye neShelf. Xa uhlengahlengisa amaqhosha e-EQ etshaneli aphezulu okanye aphakathi, ijiko lawo le-EQ liboniswa kuthotho lwe-LCD olusi-8.
I-EQ MF CH 1-16
Cofa kwaye ubambe iqhosha leBhanki emva koko iqhosha lebhasi. Jikelezisa amaqhosha aphezulu ukulungisa i-MF freq/Q. Cinezela amaqhosha aphezulu ukuguqula phakathi kwe-MF freq/Q. Jikelezisa amaqhina aphakathi ukulungisa inzuzo yeMF. Cinezela amaqhosha aphakathi ukugqitha iMF. Sebenzisa i-Mic toggle ukutshintshela ibhendi yeMF
phakathi kokuCima/Phambi/Posa. Xa ulungisa amaqhosha e-EQ etshaneli aphezulu okanye aphakathi, ijika le-EQ liboniswa kwi-8-series LCD. EQ HF CH 1-16 Cofa kwaye ubambe iqhosha leBhanki emva koko Dly iqhosha. Jikelezisa amaqhosha aphezulu ukulungisa i-HF freq/Q. Cinezela amaqhosha aphezulu ukuguqula phakathi kwe-HF freq/Q. Jikelezisa amaqhina aphakathi ukulungisa inzuzo yeHF. Cinezela amaqhosha aphakathi ukugqitha i-HF. Sebenzisa i-Mic toggle ukutshintshela ibhendi ye-HF phakathi kwe-Off/Pre/Post. Sebenzisa iFav toggle ukuguqula ibhendi yeHF phakathi kweNcopho kunye neShelf. Xa ulungisa amaqhosha e-EQ etshaneli aphezulu okanye aphakathi, igophe layo le-EQ liboniswa kwi-8-series LCD.
CH 1-16 FAT AMASHANELI
Sel toggle. Jikelezisa kunye/okanye ucinezele amaqhina aphezulu naphakathi ukulungisa iiparamitha zetshaneli ezahlukeneyo.
CH 17-32 FAT AMASHANELI
Iqhosha lebhanki + Sel toggle. Jikelezisa kunye/okanye ucinezele amaqhina aphezulu naphakathi ukulungisa iiparamitha zetshaneli ezahlukeneyo.

IJESHI LIKHETHA 1-32 (AMASHISHINI AFAT)

Ijelo elinamafutha ligama elisetyenziswa rhoqo kwiikhonsoli zedijithali ukuchaza indlela yokubonisa ukuseta iiparamitha zetshaneli ekhethiweyo. Ilingana neSikrini seSiteshi kwi-8-Series. Xa i-Ch 1-16 yeemitha ibonisiwe, hambisa i-toggle ekunene ukuya 'Sel' ukukhetha itshaneli yamafutha kwi-Ch 1-16. Xa i-Ch 17-32 yeemitha ibonisiwe, hambisa i-toggle ekunene ukuya 'Sel' ukukhetha itshaneli yamafutha kwi-Ch 17-32. Ukuphuma kwi-Fat Channel, cofa i-Meter okanye uhambise i-toggle yetshaneli ngasekunene kwakhona. Xa umjelo wamafutha ukhethiwe:

•  Imitha yesitishi ekhethiweyo iyatshintsha ibe ngasemva emhlophe.
•  Imitha yejelo elikhethiweyo kunye nenombolo yejelo kunye negama liboniswa kwicala lasekhohlo kwiNdawo yoLwazi lweDrive/Amandla.
•  Itshaneli ekhethiweyo yiPFL'd. Umsesane wayo ohambelanayo wembiza ye-LED idanyaza tyheli kunye ne-PFL 'n' idanyaza kumhlaba we-headphone kwiNdawo yoLwazi oluPhambili. Cinezela iqhosha le-HP ukuguqula phakathi kwe-PFL yetshaneli kunye nokusetha kwangaphambili kwe-HP yangoku. Oku kukuvumela ukuba ujonge umxube naxa ulungisa iiparamitha zetshaneli.
•  Amaqhosha omqolo aphezulu naphakathi atshintshela kulawulo lwepharamitha yetshaneli ekhethiweyo imisebenzi yayo ichazwe kumqolo ongasentla nophakathi kumqolo ngolu hlobo lulandelayo:

UMGQOQO OPHAKATHI (ukuSUKA EKHOHLI UKUYA EKUDENI):

•  Ch Igama: Cinezela iqhoshana ukunyusa isitshixo Hlela Igama lesitishi ikhibhodi enenyani kumboniso we-8-Series. Sebenzisa ikhibhodi ye-USB okanye iKhetha iKnob, i-HP knob, kunye ne-Toggle switch kufutshane nekona esezantsi ekunene kwe-CL-16 ukuhlela isitishi (ingoma) igama.
•  C Emva koko jikelisa iqhosha lokukhetha ukuqaqambisa umthombo, uze ucinezele ukuwukhetha.
•  I-Dly/Polarity (I-Ch 1-16 kuphela): Cofa iqhosha ukuguqula i-polarity – i-ayikhoni yendawo itshintsha ibe luhlaza xa iguqulwe. Jikelezisa iqhoshana ukulungisa igalelo lomjelo wokulibaziseka.
•  Umda: Cofa iqhoshana ukuguqulela isithinteli sivule/sivale
•  I-HPF (Ch 1-16 kuphela): Cofa iqhosha ukuze uguqule i-HPF ivule/yivale. Jikelezisa i-knob ukulungisa i-HPF 3dB roll off frequency. Xa ivuliwe, ibala kunye nomgca ophakathi weringi ye-LED iya kubonisa ukukhanya okuluhlaza okwesibhakabhaka
•  I-LF Gain, i-LF Freq, i-LF Q, i-LF Type (i-Ch 1-16 kuphela): Jikelezisa amaqhosha ukuze ulungelelanise amaxabiso e-LF band EQ. Cinezela nawaphi na amaqhina ama-4 ukugqitha/ungagqithisi ibhendi yeLF. Xa kungagqithwanga, amasimi kunye nomqolo ophakathi weringi ii-LED zibonisa i-orenji.
•  I-MF Gain, MF Freq, MF Q (Ch 1-16 kuphela): Jikelezisa amaqhosha ukuze ulungelelanise amaxabiso e-MF band EQ. Cinezela nawaphi na amaqhina ama-3 ukugqitha/ungagqithisi band yeMF. Xa kungagqithwanga, amasimi kunye nomqolo osembindini weringi ii-LEDs zibonisa umthubi.
•  I-HF Gain, i-HF Freq, i-HF Q, Uhlobo lwe-HF (i-Ch 1-16 kuphela): Jikelezisa amaqhosha ukuze ulungelelanise amaxabiso e-HF band EQ. Cinezela nawaphi na amaqhoshana ama-4 ukuze ungagqithanga/ungagqithisi ibhendi yeHF. Xa kungagqithwanga, amasimi kunye nomqolo osembindini weringi ii-LED zibonisa eluhlaza

UROWO OPHEZULU (ukuSUKA EKHOHLI UKUYA EKUDENI):

• B1 – B10 Thumela: Cofa iqhoshana ukuguqulela ibhasi ekhethiweyo ukuthumela phakathi kwe-Valiwe, i-Prefade (eluhlaza), i-Postfade (i-orenji), kunye noThumela (ibhlowu ekhanyayo). Xa imiselwe ku-Thumela (ibhulowu ekhanyayo), jikelisa iqhoshana ukuze ulungelelanise inzuzo yokuthumela yesitishi kuloo bhasi.
• I-EQ Routing (I-Ch 1-16 kuphela): Jikelezisa iqhosha ukuze ukhethe ukuba i-EQ isetyenziswa kwi-prefade okanye i-postfade okanye icinyiwe.
• I-AMix: Cinezela (i-Ch 1-16 kuphela) iqhosha lokukhetha isitishi somxube ozenzekelayo. Isicatshulwa sommandla singwevu ukuba i-automixer ivaliwe, i-purple ye-Dugan ivuliwe kwaye iluhlaza ukuba i-MixAssist yenziwe. Kwi-Ch 17-32 AMix ithathelwe indawo ngenzuzo ye-Trim. Jikelezisa ukulungelelanisa amajelo akhethiweyo inzuzo yokunquma.
• I-Pan: Jikelezisa iqhosha ukulungisa ipani. Cofa iqhosha kwipani embindini
• I-BusL, i-BusR: Cinezela iqhosha kwindlela eya kwi-Bus L, R , i-prefade (eluhlaza), i-postfade (i-orenji), okanye ayihanjiswanga (icime).

Indlela yokwenza i-CL-16 ibe ngathi yi-analog mixer

Umtya wejelo lomxubi we-analog uquka ukutrima, ifader, isolo, isimumu, ipani kunye ne-EQ. I-CL-16 inemvakalelo efanayo kunye neefader zayo ezizinikeleyo, i-trims, i-solos (PFLs), kunye ne-mutes. Ngokuseta i-CL-16 kwimowudi ye-EQ umz. LF EQ (Bamba iBhanki emva koko ngengalo), iqhosha letshaneli eliphezulu neliphakathi linika ufikelelo kulawulo lwe-EQ kwaye lubonelele ngakumbi ngokuziva kwetshaneli ye-analog.

Iziphumo
Kuzo zonke iindlela ngaphandle kweSiteshi seFat, i-EQ kunye neBhasi iThumela kwiimowudi zeFaders, jikelezisa amaqhosha aphezulu ukulungisa iinzuzo zemveliso kwaye ucinezele amaqhosha aphezulu ngelixa ubambe iMenu ukuthulisa iziphumo.

Ulawulo lwezoThutho

YEKA
Cofa ukumisa ukudlala okanye ukurekhoda. Iqhosha lokumisa likhanyisa tyheli xa limisiwe. Ngelixa umisiweyo, cofa ukumisa ukuze ubonise ukuthatha okulandelayo kwi-LCD.
INGXELO
Cofa ukuqalisa ukurekhoda ukuthatha okutsha. Iqhosha lerekhodi kunye neNdawo yoLwazi oluPhambili ikhanyisa ebomvu xa urekhoda.
Qaphela: Buyisela umva, Dlala kunye noThutho oluPhambili olukhawulezayo lulawula ukusilela ukuya kwi-U1, U2, kunye namaqhosha omsebenzisi we-U3, ngokulandelelanayo.

Amaqhosha eMowudi

Jonga Iindlela/Imitha Views ngasentla ngolwazi oluthe kratya.
PAN/HPF Cinezela i-pan ukutshintsha amaqhina aphakathi kulawulo lwepani. Ngelixa ubambe iBhanki/ALT, cofa i-pan ukuze utshintshe amaqhosha aphakathi kulawulo lwe-HPF.
I-ARM/LF Cinezela kwaye ubambe Ingalo ukubonisa ubume bengalo kumaqhina, emva koko ucinezele iqhoshana ukuguqulela ingalo/ukukhulula. Ngelixa ubambe iBhanki/ALT, cinezela
Ingalo ukutshintsha amaqhina aphezulu naphakathi kulawulo lweLF EQ.
IBHNKI/ALT Cofa ukubonisa kunye nokulawula i-Ch 17-32.
IBHASI/MF Cofa ukubonisa kunye nokulawula iibhasi. Ngelixa ubambe iBhanki/ALT, cofa iBus ukuze utshintshe amaqhosha aphezulu naphakathi kulawulo lweMF EQ.
I-DLY/HF Cinezela ukutshintshela amaqhina aphakathi ukulibazisa kunye nolawulo lokuguqula ipolarity. Ngelixa ubambe iBhanki/ALT, cofa i-Dly ukuze utshintshe amaqhosha aphezulu naphakathi kulawulo lwe-HF EQ.

Amaqhosha eMetadata

• Hlela imetadata yeyangoku okanye elandelayo. Ngelixa urekhoda, imetadata yokuthatha yangoku iyahlelwa. Ngelixa umisiweyo, ukuthathwa kwerekhodi yokugqibela okanye i-metadata elandelayo inokuhlelwa. Ngelixa ukwimo yokumisa, cofa u-Misa ukuze utshintshe phakathi kokuhlela langoku kunye nokuthatha okulandelayo.
• UMBONISO Cofa ukuhlela igama lomboniso. Ngelixa urekhoda, umboniso wangoku wokuthatha uyahlelwa. Ngelixa umisiweyo, uthatho olurekhodiweyo lokugqibela okanye umboniso olandelayo ungahlelwa. Ngelixa ukwimo yokumisa, cofa ukumisa ukutshintsha phakathi kokuhlela indawo yangoku kunye nelandelayo yokuthatha.
• THATHA Cofa ukuhlela inombolo thatha. Kwirekhodi, inani langoku lokuthatha lihleliwe. Ukumisa, ukuthathwa kokugqibela okurekhodiweyo okanye inombolo elandelayo yokuthatha inokuhlelwa. Ngelixa umile, cofa ukumisa ukutshintsha phakathi kokuhlela langoku kunye nenombolo yokuthatha elandelayo.
• AMANQAKU Cofa ukuhlela amanqaku. Kwirekhodi, amanqaku akhoyo ngoku ahleliwe. Ukuyeka, ukuthatha okurekhodiweyo kokugqibela okanye amanqaku alandelayo angahlelwa. Ngelixa umile, cofa ukumisa ukutshintsha phakathi kokuhlela amanqaku angoku kunye namanqaku alandelayo athathiweyo.

Amaqhosha abelwe umsebenzisi

I-CL-16 ibonelela ngamaqhosha amahlanu aphambili anokucwangciswa ngumsebenzisi, i-U1 nge-U5 yokufikelela ngokukhawuleza kwimisebenzi emihlanu eyintandokazi. Imisebenzi eboniswe kula maqhosha ichazwe kwindawo yeSichazi seQhosha lomsebenzisi kwiNdawo yoLwazi oluPhambili lweLCD. Yabela imisebenzi kula maqhosha kwi-Controllers> Imephu> imowudi yokufunda. Iindlela ezimfutshane ezongezelelweyo ezintlanu zomsebenzisi (kwishumi lilonke) zinokufumaneka ngokubamba iqhosha leBhanki/Alt emva koko ucofe u-U1-U5. Imephu ezi ngokubamba i-Alt emva koko iqhosha lika-U kwiMaphu>Funda indlela. Ezinye iiswitshi/amaqhosha kwicala lasekunene le-CL-16 zinokumatshwa kule menyu nazo.

Buyela / Com amaqhosha
Cinezela ukujonga imbuyekezo kwii-headphones. Xa usebenzisa iScorpio, jonga iCom Rtn 2 ngokucofa iCom Rtn ngelixa ucofa iqhosha leHP. Iqhosha leCom Rtn likhanyisa ngokuluhlaza xa kubekwa iliso kwiCom Rtn 2 kunye neorenji xa kubekwa iliso kwiCom Rtn 1. Cofa iCom 1 ukwenza unxibelelwano lweCom 1 lusebenze. Cofa uCom 2 ukuvula unxibelelwano lweCom 2.

Iqhosha lemitha
Cinezela ukuphuma kwimo kwaye utshintshe umva kwi-HP yangoku yokuseta ukubuyela kwi-ch 1-16 imitha yasekhaya. view.

Iqhosha leMenu
Cofa ukungena kwimenyu. Bamba iMenu emva koko ucofe imbiza yokucheba ukuthulisa isitishi. Bamba iMenu emva koko ucinezele i-encoder yomqolo ongaphezulu ukuthulisa imveliso (xa iseti yomqolo ophezulu ibonisa iziphumo) Bamba iMenu emva koko ucinezele i-encoder yomqolo ophakathi kwiMowudi yeBhasi okanye i-encoder yomqolo ophezulu kwiBhasi Thumela kwiMowudi yeeFaders ukuthulisa ibhasi. Bamba i-Menu emva koko uhambise i-PFL toggles ekhohlo ukufikelela kwiimenyu njengoko kuchaziwe kwi-System>Menu+PFL Tshintsha i-Action Action menu. Imisela ukuba umsebenzi wethutyana ukhaba nini. Ukubamba ukhetho olukhethiweyo ixesha elide kunexesha lomqobo kuya kumisa olo khetho lusebenze njengethutyana.

Iinkcukacha

Iinkcukacha zinokutshintshwa ngaphandle kwesaziso sangaphambili. Ngolwazi lwamva nje olukhoyo kuzo zonke iimveliso zeZixhobo zeZandi, ndwendwela yethu webindawo: www.sounddevices.com.

• UMQULUTAGE
  I-10-18 V DC kwi-XLR-4. I-Pin 4 = +, i-pin 1 = umhlaba.
• UMZOLO WAM ngoku (MIN)
  I-560 mA ithule kwi-12 V DC ngaphakathi, onke amazibuko e-USB ashiywe evuliwe
• UMDLALO WAMVA (MID)
  2.93 A, USB izibuko umthwalo iyonke 5A
• UMZOBO WAM ngoku (MAX)
  5.51 A, USB izibuko umthwalo iyonke 10A
• I-USB-A IZIBONELELO
  5 V, 1.5 A nganye
• I-USB-C PORTS
  5 V, 3 A nganye
• IZIXHOBO EZIKUDE, AMANDLA
  5 V, 1 A ekhoyo kwi-pin 10
• IZIXHOBO EZIKUDE, IGALELO
  60 k ohm igalelo eliqhelekileyo Z. Vih = 3.5 V min, Vil = 1.5 V max
• IZIXHOBO EZIKUDE, IZIPHUMO
  100 ohm imveliso Z xa iqwalaselwe njengemveliso
• UKUTSHINTSHA UNYAWO
  1 k ohm igalelo eliqhelekileyo Z. Qhagamshela emhlabeni ukuze usebenze (esebenzayo ephantsi).
• Ubunzima:
  • 4.71 kg
  • (10 lbs 6 oz)
• IMILINGANISELO: (HXWXD)
  • ISIKHUNI SISONGWE PHANTSI
    • 8.01cm X 43.52cm X 32.913cm
    • (3.15 ngaphakathi. X 17.13 kwi. X 12.96 ngaphakathi.)
  • Isikrini SONGWA
    • 14.64cm X 43.52cm X 35.90cm
    • (5.76 ngaphakathi. X 17.13 kwi. X 14.13 ngaphakathi.)

IiFaders zokuSebenza

I-CL-16 ifaka i-Penny & Giles faders esebenzayo entsimini. Iifaders zinokutshintshwa ngokukhawuleza ngomzamo omncinci.
UTSHINTSHA IFADER:
Penny & Giles 104 mm Linear Manual Fader PGF3210

UKUSUSA IFADER:

• INYATHELO 1 Susa iqhosha lefader ngokutsala u-u ngobunono
• INYATHELO 2 Susa izikrufu ezibambe i-fader endaweni. Enye ngaphezulu
• INYATHELO 3 Phenya iyunithi ukuze ufikelele kwizibuko le fader. Susa izikrufu ezibini kwaye ususe isiciko
• INYATHELO LESI-4 Nxibelela uqhagamshelo lombane lwefader ngokutsala ngobunono.
• INYATHELO 5 Susa i-fader.
  • UKUFAKA I-FADER ENTSHA BUYELA UBUYISA AMANYATHELO ABANGAPHAMBILI:
• INYATHELO 6 Faka ifader entsha yokutshintsha. Faka endaweni ye Penny & Giles 104 mm Linear Manual Fader PGF3210.
• INYATHELO 7 Qhagamshela kwakhona uqhagamshelo lombane oluyifader.
• INYATHELO LESI-8 Buyisela ipaneli yangasemva kunye nezikrufu zokungena ngasemva.
• INYATHELO LESI-9 Faka izikrufu ezibini.
• INYATHELO LE-10 Buyisela iqhosha lefader

Amaxwebhu / Izibonelelo

IZIXHOBO EZANDI CL-16 Umphezulu woLawulo lweFader yoMda [pdf] Isikhokelo somsebenzisi I-CL-16, i-Linear Fader Control Surface, i-CL-16 iFader Control Surface

Iimbekiselo

• Incwadi yokusebenzisa