Zipangizo ZA SOUND CL-16 Linear Fader Control Surface

MAU OYAMBA

Takulandilani ku CL-16

CL-16 Linear Fader Control Surface ya 8-Series imaphatikiza kuphweka kwa ma analogi achikhalidwe ndi mphamvu ndi kusinthasintha kwa makina a digito. Malo owongolera a bespoke awa amathandizira kusakanikirana kotengera ngolo ndi magwiridwe antchito ake, 16 zofewa zosalala zosalala, zodzikongoletsera 16 zodzipatulira, ndi LCD yowoneka bwino. Zonsezi zidapangidwa mwaluso kukhala 16.3 "-wide compact unit yomwe imalowa mungolo ndipo imagwira ntchito kuchokera ku 12 V DC.

• Yogwirizana ndi 833, 888, ndi Scorpio
•  16 odzipatulira owongolera ma rotary trim
•  16 odzipereka odzipereka
•  Malingaliro opangidwa mwachilengedwe pomwe ma tchanelo 1-16 adapereka, zowongolera zomwe sizimabanki monga cholumikizira chachikhalidwe cha analogi, ndi zina zofunika zitha kupezeka mwachangu.
•  32 maulamuliro ozungulira amitundu yambiri a EQ, poto, njira 17-32 zopindula, kupindula kwa mabasi, kupindula, ndi zina zambiri.
•  Chophimba chachikulu cha LCD chowoneka ndi dzuwa chimapindika pansi kuti chisungidwe mosavuta komanso motetezeka
•  Mabatani atsopano odalirika kwambiri, opanda phokoso, osavuta kugwira ntchito zazikulu monga kujambula, kuyimitsa, metadata, coms, returns, ndi zina.
•  Mabatani asanu omwe angagwiritsidwe ntchito
• Madoko a USB omangidwira madoko 5 okhala ndi (awiri USB-C ndi atatu USB-A) yamakiyibodi, piritsi la SD-Remote, ndi zotumphukira zina za USB.
•  1/4" ndi 1/8" mahedifoni jacks
•  Cholumikizira chakutali cha 10-Pini cholumikizira mawaya a LED ndi masiwichi, komanso 1/4" phazi lolowera
•  Imalumikizana ndi USB-B
•  12 V DC yoyendetsedwa ndi 4-pin XLR (osaphatikizidwa)
•  16 Penny & Giles 100 mm zowoneka bwino zowuluka - zowoneka bwino kwambiri pamsika
•  Kufikira mwachangu pansi pagawo lothandizira kumunda kwa ma faders

Gulu Views

KUPANGA

1.  PENNY & GILES FADERS
   Imasintha magawo a fader pamayendedwe 1-16. -Inf mpaka +16 dB fader osiyanasiyana. Zopindulitsa za Fader zikuwonetsedwa pa LCD.
2.  PFL/SEL TOGGLE Switches
   Kusuntha chosinthira kumanzere, PFL imayimitsa njira yosankhidwa kapena solo basi ikakhala mu Bus Mode. Kusuntha chosinthira kumanja kumasankha njira yokhazikitsira tchanelo (aka FAT channel) kapena kusankha mabasi omwe amatumiza pamayendedwe a fader mukakhala mu Bus Mode.
3.  KHALA/MUTE POTS W/RING MA LED
   Tembenukirani kuti musinthe kupindula kwa tchanelo 1-16. Zopindulitsa zochepetsera zikuwonetsedwa mu LCD. Dinani kwinaku mukugwira Menyu kuti mutsegule/kusalankhula tchanelo 1-16. Ma LED ozungulira ozungulira amapereka chizindikiritso cha mawonekedwe a tchanelo, PFL, osalankhula, ndi mawonekedwe amanja.
   •  Kuchulukira kobiriwira, chikasu / lalanje, ndi kufiyira pamlingo wa siginecha, ntchito yochepetsera isanakwane/positi ndikudulira motsatana.
   •  Kunyezimira chikasu = njira PFL'd.
   •  Buluu = njira yotsekedwa
   •  Red = njira yokhala ndi zida.
4. PAKATI Mzere WAKUCHULUKITSA NTCHITO ZOPHUNZITSIRA W/MAPTENGE a LED
   Zozungulira / zosindikizira zokhala ndi ntchito zingapo kutengera zomwe mwasankha. Makhalidwe ndi mawonekedwe akuwonetsedwa pamzere wachiwiri wa LCD. Sinthani kapena dinani kuti musinthe kapena kusintha magawo osiyanasiyana. Ma LED ozungulira mphete amawonetsa zidziwitso zosiyanasiyana
5. WAKUPAMWA MULTI-FUNCTION MA KNOBS W/MAPTENGE MA LED.
   Zozungulira / zosindikizira zokhala ndi mphamvu zingapo kutengera momwe mwasankha. Makhalidwe ndi mawonekedwe akuwonetsedwa pamzere wapamwamba wa LCD. Sinthani kapena dinani kuti musinthe kapena kusintha magawo osiyanasiyana. Ma LED ozungulira mphete amawonetsa zidziwitso zosiyanasiyana
6. IMANI BATANI
   Imasiya kujambula kapena kusewera. Kukanikiza Imani ndikuyimitsa masinthidwe owonetsa dzina lotsatira mu LCD kuti lisinthidwe ndi mabatani a Scene, Take, Notes.
7.  BUTANI YOLEMBEDWA
   Imayamba kujambula kwatsopano. Imaunikira zofiira pojambula.
8.  MABUTANI AMODZI
   Imasankha mitundu yosiyanasiyana kuti idziwe kuti ndi mita ndi zidziwitso zina ziti zomwe zikuwonetsedwa pa LCD komanso ntchito ya mizere yakumtunda ndi yapakati yokhala ndi masiwichi amtundu wa PFL/Sel.
9.  METADATA MABUTONI
   Makatani achidule kuti musinthe metadata mwachangu. Sinthani Scene, Tengani ndi Zolemba pazapano kapena zina. Wonjezerani dzina lachiwonetsero, zungulirani chojambula kapena chotsani kujambula komaliza (Kutenga zabodza).
10.  MABUTANI WOGWIRITSA NTCHITO
    Zosavuta kugwiritsa ntchito pamitundu yosiyanasiyana kuti mufikire mwachangu ntchito za Mapu zikuwonetsedwa pamwambapa mu LCD
11. MABABONI OBWERETSA
    Mabatani odzipatulira kuti muwunikire zobwera zosiyanasiyana mu mahedifoni
12.  COM TUMIZANI MABATA
    Dinani kuti mulankhule. Imayendetsa maikolofoni yosankhidwa kupita kumalo omwe akonzedwa pamindandanda ya Com Send Routing.
13.  BATANI LA ​​METER
    Dinani kuti mubwerere ku LCD yakunyumba yokhazikika view ndi HP preset. Imafanananso magwiridwe antchito a batani la Meter pagawo lakutsogolo la 8-Series.
14.  MENU BATANI
    Imabwereza ntchito zomwe zapatsidwa pa batani la Menyu pagawo lakutsogolo la 8-Series. Gwirani kenako dinani chotchinga poto kuti mutsegule tchanelocho. Amagwiritsidwanso ntchito kuletsa mabasi ndi zotuluka m'njira zoyenera
15.  TOGLE Switchches
    Imabwereza ntchito zomwe zapatsidwa za ma switch osinthira atatu omwe ali pansi pa gulu lakutsogolo la LCD la 8-Series.
16.  KODI MUKULU
    Imabwereza ntchito za mutu wam'mutu pa 8-Series kutsogolo kwa LCD. Pa Scorpio, gwirani ndikukanikiza batani la Com Rtn kuti mutsegule / kuzimitsa kuwunika kwa Com Rtn 2 m'makutu. Dinani pamene tchanelo kapena basi yayimitsidwa yokha kuti musunthire ku chojambulira chamutu chapano. Gwirani nthawi yomwe mukusewera kuti mulowetse mulingo wa audio scrub.
17.  Sankhani KNOB
    Imabwereza ntchito za Select knob pagawo lakutsogolo la LCD la 8-Series.
18.  LCD WOWEREKA WOWEREKA WOWONA dzuŵa
    Chiwonetsero chowala cha metering, magawo, mitundu, zoyendera, timecode, metadata ndi zina zambiri. Kuwala kwa LCD kumayikidwa mu Menyu> Olamulira> CL-16> Kuwala kwa LCD.

PASI

KUBWERA

KUTSOGOLO

LCD ANASONYEZA

1.  UPPER ROW KNOB DESCRIPTOR
   Imafotokoza ntchito ya mizere yowongolera mizere yamitundu yambiri. Ntchito imasintha malinga ndi mawonekedwe osankhidwa.
2.  PAKATI ROW KNOB DOSANDA
   Imafotokoza ntchito ya mizere yowongolera mizere yapakati yamitundu yambiri. Ntchito imasintha malinga ndi mawonekedwe osankhidwa.
3.  MIMBA YA PAKATI
   Imawonetsa zofunikira pa tchanelo chilichonse kapena basi kutengera magawo omwe akusinthidwa pogwiritsa ntchito mizere yapakati monga Pan, Delay, HPF, EQ, Ch 17-32, Kupindula Kwa Mabasi, Kuyenda Mabasi, Kutumiza Mabasi, FAT Channel Parameters ndi zina zambiri.
4.  MALO OGWIRITSA NTCHITO
   Imawonetsa zofunikira pa tchanelo chilichonse, basi, kapena zotuluka kutengera magawo omwe akusinthidwa pogwiritsa ntchito mizere yakumtunda monga Kupindula, HPF, EQ, Kupindula Kwa Mabasi, Kuyenda Mabasi, Kutumiza Mabasi, Parameters ya FAT Channel ndi zina zambiri.
5.  MAIN INFO AREA
   Imawonetsa zidziwitso zosiyanasiyana kuphatikiza metering ya LR, zowerengera nthawi, metadata, ndi zina zambiri. Mtundu wakumbuyo umasintha kutengera momwe amayendera motere:
   • Kumbuyo kofiira = kujambula
   • Kumbuyo kwakuda = kuyimitsidwa
   • Kumbuyo kobiriwira = kusewera
   • Kunyezimira kobiriwira = kusewera kwayimitsidwa
   • Kumbuyo kwa buluu = FFWD kapena REW
6.  MAIN LR MIX METERS
   Imawonetsa ma metre ophatikizira mabasi a LR ndi mbiri yawo.
7.  TENGA DZINA
   Onetsani ndikusintha Tengani Dzina laposachedwa. Dinani Imani mutayimitsidwa kuti muwonetse dzina lotsatira.
8.  DZINA LA MALO
   Onetsani ndikusintha dzina la Scene yomwe ilipo. Dinani Imani mutayima kuti muwonetse dzina lotsatira la Scene.
9.  Tengani NAMBARI
   Onetsani ndikusintha nambala ya Tengani yamakono. Dinani Imani mutayima kuti muwonetse nambala yotsatira Tengani.
10.  MFUNDO
    Onetsani ndikusintha nambala yamakono ya Tengani. Dinani Imani mutayima kuti muwonetse zolemba za Tengani lotsatira.
11.  MABUTANI ONSE 1-5 MALANGIZO
    Imawonetsa mayina a njira zazifupi zomwe zajambulidwa ku mabatani a U1 - U5.
12.  TIMECODE COUNTER
    Imawonetsa nambala yanthawi yomwe ilipo panthawi yojambulira ndikuyimitsa ndi nthawi yosewera nthawi yomwe mukusewera.
13.  MTHEWU NDI YOKHALA NTHAWI YOKHALA
    Kuwonetsa zomwe zapitazi zimatenga nthawi yojambulidwa ndi kusewera. Panthawi yosewera, nthawi yotsalayo imawonetsedwa pambuyo pa '/'.
14.  FRAME RATE
    Imawonetsa mawonekedwe anthawi yanthawi yake.
15.  HP PRESET
    Imawonetsa gwero la HP lomwe lasankhidwa pano ndi voliyumu ya HP ikasinthidwa ndi knob ya HP.
16.  SYNC/SAMPMITU YA LE
    Imawonetsa gwero la kulunzanitsa pano ndi sample rate.
17.  KUBWERERA MITA
    Imawonetsa metering pamayendedwe onse a chizindikiro chilichonse chobwerera.
18.  NTCHITO KAPENA DZINA LA BASI
    Imawonetsa dzina la tchanelo, kudula, ndi kupindula kwa fader pamene viewnjira mita. Imawonetsa nambala ya basi ndi kupindula kwa basi viewndi mabasi mita. Masambawa amasintha mtundu wawo motere:
    •  Zolemba zakuda / zotuwa = njira yozimitsidwa
      kapena palibe gwero losankhidwa.
    •  Kumbuyo kotuwa/zolemba zoyera = njira/basi yayatsidwa ndikulandidwa zida.
    •  Kumbuyo kofiyira/zolemba zoyera = njira/basi yokhala ndi zida.
    •  Kumbuyo kwa buluu/zolemba zoyera = njira/basi yatsekedwa.
19.  MALANGIZO OLUMIKIZANA
    Magawo a Channel Info amaphatikizidwa ngati ma tchanelo alumikizidwa.
20.  CHANNEL KAPENA MITA YA BASI
    Imawonetsa mayendedwe a tchanelo kapena mabasi kutengera momwe mwasankha.
21.  COLOR WOTHANDIZA CH. ZIZINDIKIRO ZA GULU
    Makanema okhala ndi chizindikiro chamtundu womwewo amagawidwa m'magulu. Sankhani mtundu womwe ukugwira ntchito pagulu mu CL-16>Mtundu wa Gulu.
22.  METER VIEW NAME
    • Imawonetsa '1-16' pamene viewnjira 1-16 mamita
    • Imawonetsa '17-32' pamene viewnjira 17-32 mamita
    • Imawonetsa dzina la tchanelo liti viewndi njira ya FAT
    • Imawonetsa 'Mabasi' pamene viewndi mabasi mita
    • Kuwonetsa Basi No viewndi mabasi otumiza-on-faders mode
23.  DRIVE/MPHAMVU INFO AREA
    • Imawonetsa SSD, SD1, ndi SD2 nthawi yotsalira.
    • Imawonetsa 8-Series ndi CL-16 gwero lamphamvu laumoyo ndi voltage.

Kulumikiza ku 8-Series Mixer- Recorder Yanu

•  Pogwiritsa ntchito chingwe cha USB-A choperekedwa ku USB-B, lumikizani doko la 8-Series USB-A ku doko la CL-16 USB-B.
•  Lumikizani chojambulira chamutu cha 8-Series' 1/4” TRS ku jakisoni ya CL-16's 1/4” TRS “To 8-Series Headphone Out” pogwiritsa ntchito chingwe chomwe mwapatsidwa.
•  Lumikizani gwero lamagetsi la 10-18 V DC pogwiritsa ntchito 4-pin XLR (F) ku DC Input ya CL-16. Gwero lamagetsi silinaphatikizidwe.
•  Mphamvu pa 8-Series Mixer-Recorder. Onani Maupangiri oyenera a 8-Series pamalangizo onse ogwiritsira ntchito ndi tsatanetsatane.

Kuyatsa/Kuzimitsa

•  Mphamvu pa 8-Series Mixer-Recorder. 8-Series ikatha mphamvu, ingoyambitsa CL-16.
•  Kuti muzimitse, ingoyang'anani 8-Series power toggle switch kuti muzimitse. CL-16 idzakhalanso mphamvu

Kuchotsa CL-16 kuchokera ku 8-Series

CL-16 ikhoza kulumikizidwa / kutulutsidwa kuchokera ku 8-Series pomwe imayatsidwa popanda kuwonongeka pagawo lililonse. CL-16 ikatulutsidwa, "Control Surface Unplugged" imawonetsedwa mu 8-Series LCD. Palibe milingo yomwe idzasinthe. Pakadali pano: Yembekezerani kusintha kwadzidzidzi ngati Owongolera> Soft Fader/ Trim Pickup sayatsidwa chifukwa ma audio tsopano atsimikiziridwa ndi ma trims ndi ma fader pa 8-Series.

Kusintha CL-16 Firmware

Pakafunika, fimuweya ya CL-16 imasinthidwa zokha mukakonzanso 8-Series firmware. Kusintha kwa firmware ya 8-Series PRG file ili ndi zosintha za 8-Series ndi CL-16. Lumikizani CL-16 ku 8-Series ndikuwonetsetsa kuti zonse zilumikizidwa ndi magwero odalirika amagetsi. Sinthani firmware ya 8-Series pogwiritsa ntchito njira yabwinobwino. Ngati pali zosintha za firmware za CL-16, zimangoyamba 8-Series ikamaliza kukonza. Batani loyimitsa la CL-16 lidzawala chikasu pomwe CL-16 ikusintha. Kusintha kwa CL-16 kukamaliza, combo ya 8-Series/CL-16 idzayatsidwa ndikukonzekera kugwiritsidwa ntchito.

Ntchito Yathaview

CL-16 imaphatikiza chithunzithunzi chamzere wosakaniza wachikhalidwe ndi kuthekera kochita zinthu zambiri kosakanikirana kwamakono kwa digito. Mukadziwa zowongolera zosiyanasiyana, mitundu yosiyanasiyana ndi mita yolumikizana nayo views, kuthekera kwakukulu kwa chosakanizira / chojambulira chanu cha 8-Series kudzawonekera. Ntchito zonse za 8-Series (njira, mabasi, zotuluka, menyu metadata, coms) zitha kuwongoleredwa kuchokera ku CL-16. Ngakhale zambiri zambiri zimawonetsedwa pa CL-16 LCD, 8-Series LCD imaperekabe chidziwitso chothandiza pochita zinthu zina monga kuwongolera, kulemba mawu.

• Mzere wa Channel
  Zowongolera zamakanema apamwamba ndi ma LCD mita, mayina, ndi zikhalidwe zimalumikizidwa mu 'mzere' woyima kotero kuti diso limatha kuyenda mwachilengedwe pakati pa kuwongolera ndikuwonetsa.
• CHANNEL TRIMS 1-16
  Miphika yochepera 16 idaperekedwa kuti isinthe kuchuluka kwa ma tchanelo 1-16. Kuchepetsa kupindula sikukupezeka pamakanema 17-32. Tembenuzani poto kuti musinthe kupindula kwake ndikuwonetsa phindu lake mu dB mumzere wapansi wa LCD. Dulani mphete za LED zowonetsa mulingo wa tchanelo (kusinthasintha kobiriwira), kuchepetsa njira yoyambira/kuyika (yachikasu/lalanje), ndi kudula (kufiira).
• CHANNEL TRIMS 17-32
  Dinani Bank kuti musinthe kupita ku Ch 17-32 kenaka tembenuzani kondomu kuti musinthe kupindula kwake ndikuwonetsa phindu lake mu dB pansi ndi mzere wapamwamba wa LCD.
• CHANNEL MUTES 1-16
  Dinani poto yochepetsera pamene mukugwira Menyu kuti mutonthoze/kusalankhula tchanelo 1-16. Ikayimitsidwa, mphete ya pot pot ya LED imasanduka yabuluu.
• CHANNEL MUTES 17-32
  Dinani Bank kuti musinthe kupita ku Ch 17-32 kenako dinani batani lapakati kwinaku mukugwira Menyu kuti mutontholetse/kutsegula njira 17-32. Akamalankhula, mphete yapakati pa knob ya LED imasanduka buluu.
• CHANNEL FADERS 1-16
  Ma fader 16 a Penny ndi Giles adadzipereka kuti asinthe ma fader panjira 1-16. Sungani fader kuti musinthe phindu lake ndikuwonetsa phindu lake mu dB mumzere wapansi wa LCD
• CHANNEL FADERS 17-32
  Kuti muphatikize njira 17-32, dinani Bank kuti musinthe ku Ch 17-32 kenaka mutembenuzire kapu yapakati kuti musinthe kupindula kwake ndikuwonetsa phindu lake mu dB pansi ndi mzere wapakati wa LCD.
• CHANNEL PFLS 1-16
  Ch 1-16 mita ikawonetsedwa, sunthani chosinthira kumanzere kupita ku 1-16 ya PFL. Ngati tchanelo 1-16 ndi PFL'd, imalumikizidwa ndi mphete ya pot pot ya LED ikunyezimira chikasu ndipo PFL 'n' imanyezimira pamutu wam'mutu mu Main Info Area. Sunthani chosinthira kumanzere kachiwiri kapena dinani Meter kuti muletse PFL ndikubwerera ku HP yomwe ilipo.
• CHANNEL PFLS 17-32
  Ch 17-32 mita ikawonetsedwa (pokanikiza banki), sunthani chosinthira kumanzere kupita ku 17-32 ya PFL. Ngati tchanelo 17-32 ndi PFL'd, chimalumikizidwa ndi mphete yapakatikati ya LED ikunyezimira chikasu ndipo PFL 'n' imayang'ana pamutu wam'mutu mu Main Info Area. Sunthani chosinthira kumanzere kachiwiri kapena dinani Meter kuti muletse PFL ndikubwerera ku HP yomwe ilipo.

Njira / mita Views

CL-16 ili ndi machitidwe osiyanasiyana opangira (olembedwa pansipa). Kusintha kwa amn kumasintha magwiridwe antchito amitundu yambiri ndipo nthawi zina, kusintha mita ya LCD. View. Ntchito ndi/kapena mtengo wa mitsuko yamitundumitundu ikuwonetsedwa mugawo la Upper ndi Middle Row LCD komanso m'magawo ofotokozera a ngodya yakumanzere.

CH 1-16 (MITA YOSINTHA YANYUMBA VIEW) 
Dinani batani la Meter kuti nthawi zonse mubwerere ku mita yofikira kunyumba view. tembenuzani nsonga zapamwamba kuti musinthe zotulukapo; dinani ndikugwira Menyu kenako dinani batani lapamwamba kuti mutsegule zomwe zikugwirizana.
CH 17-32 (BANK)
Dinani batani la Bank. Batani la Bank likuthwanima zobiriwira ndi mita view kusintha ku maziko obiriwira. Sinthani zitsulo zapakati kuti musinthe phindu la Ch 17-32 fader; dinani pamene mukugwira Menyu kuti mutontholetse. Sinthani nsonga zapamwamba kuti musinthe mapindu a Ch 17-32. Kubanki kupita ku Ch17-32 kutha kuyimitsidwa popita ku Controllers>CL-16>Bank Disable to On.
PAN CH 1-16
Dinani Pan batani pamene viewndi Ch 1-16. Pan batani imawunikira pinki. Sinthani zitsulo zapakati kuti musinthe ch 1-16 poto; dinani ma knobs kuti pakati poto. Pan malo amasonyezedwa ndi chopingasa buluu bala. tembenuzani nsonga zapamwamba kuti musinthe zotulukapo; dinani pamene mukugwira menyu kuti muthe kutulutsa mawu.
PAN CH 17-32
Dinani Pan batani pamene viewndi Ch 17-32. Pan batani imawunikira pinki. Sinthani zitsulo zapakati kuti musinthe ch 17-32 poto; dinani ma knobs kuti pakati poto. Pan malo amasonyezedwa ndi chopingasa buluu bala. tembenuzani nsonga zapamwamba kuti musinthe zotulukapo; pamene mukugwira menyu kuti muthe kutulutsa mawu.
KUCHEDWA/POLARITY CH 1-16
Dinani batani la Dly. Dly batani imawunikira buluu wopepuka. Sinthani zitsulo zapakati kuti musinthe kuchedwa kwa ch 1-16; dinani ma knobs kuti mutembenuze polarity. tembenuzani nsonga zapamwamba kuti musinthe zotulukapo; dinani pamene mukugwira menyu kuti mutonthoze zotulutsa.
ARM
Dinani ndikugwira batani la Arm (mikono imatha kusinthidwa mukagwira batani la mkono). Imawonetsa mawonekedwe a tchanelo 1-16 pa ma LED a mphete ya pot pot ndi njira 17-32 pamkono pa ma LED apakati. Chofiira chili ndi zida. Dinani ma knobs kuti musinthe mkono / kuchotsa zida. Mumawonekedwe a Mabasi (kukanikiza Basi), kukanikiza ndi kugwira Arm kumawonetsa mikono ya basi (Basi 1, Basi 2, Basi L, Basi R) pamakina apakati a LED. Mu Bus Send on Faders mode, kukanikiza ndi kugwira mkono kumawonetsa mikono yonse: - Ch 1-16 mikono pa trim pot ring ring LEDs, Ch 17-32 mikono pa ma LED apakati knob mphete, ndi manja a mabasi pa ma LED a knob mphete zapamwamba.
MITUNDU YA CHANNEL
Mitundu yamakanema itha kugwiritsidwa ntchito kuthandiza kuzindikira ndikusiyanitsa pakati pa magwero a mayendedwe. Pa njira iliyonse 1-32, sankhani mtundu kuchokera ku Controllers>- CL-16>Channel Colors menyu. Mtundu womwe wasankhidwa umayikidwa kumbuyo kwa tchanelo ndikupitilira mitundu yotuwa ya fakitale ya ch 1-16 ndi yobiriwira pa ch 17-32. Chidziwitso: Mitundu yamakanema simawonetsedwa mu Bus Send On Fader view.
MABASI
Dinani kuti muwonetse Mabasi 1-10, L, R mamita pazithunzi za CL-16 LCD ndi Bus Routing pa 8-mndandanda wa LCD Bus batani amaunikira pinki. Sinthani zitsulo zapakati kuti musinthe zopindula za Mabasi L, R, B1 - B10; sunthani chosinthira kumanzere kupita ku basi; dinani pamene mukugwira Menyu kuti mutontholetse. tembenuzani nsonga zapamwamba kuti musinthe zotulukapo; dinani pamene mukugwira Menyu kuti mutonthoze zotulutsa.
BASI IMATUMIKIRA PA FADERS CH 1-16
Dinani batani la Basi + Sel toggle. Basi ndi solo'd ndipo mawonekedwe ake mayendedwe amawonetsedwa pa 8-mndandanda wa LCD. Batani la Basi likuthwanima pinki ndi mita view kusintha ku maziko abuluu owala. Dinani zonona zapakati kuti muyendetse Ch 1-16 kupita ku prefade (yobiriwira), postfade (lalanje) kapena kudzera pa send gain (buluu wowala). Mukayikidwa kuti mutumize phindu, tembenuzani kondomu yapakati kuti musinthe kupindula kwa kutumiza. Dinani batani la Banki kuti mupeze zotumiza za ch 17- 32. Zunguzani nsonga zapamwamba kuti musinthe mapindu a Mabasi; kanikizani zitsulo zam'mwamba kuti musalankhule mabasi.
BASI IMATUMIKIRA PA FADERS CH 17-32
Dinani batani la Basi + Sel kusintha liti viewndi Ch 17-32. Basi ndi solo'd ndipo mawonekedwe ake mayendedwe amawonetsedwa pa 8-mndandanda wa LCD. Batani la Basi limanyezimira pinki ndi mita view kusintha ku maziko abuluu owala. Dinani zitsulo zapakati kuti muyendetse Ch 17-32 kupita ku mabasi (obiriwira), postfade (lalanje) kapena kudzera pa tuma phindu (buluu wowala). Mukayikidwa kuti mutumize phindu, tembenuzani kondomu yapakati kuti musinthe kupindula kwa kutumiza. Dinani batani la Bank kuti mupeze zotumizira
Chithunzi 1-16. HPF CH 1-16
Dinani ndikugwira batani la Bank kenako Pan batani. Sinthani nsonga zapamwamba kuti musinthe ma frequency a HPF. Dinani zitsulo zapakati kuti mulambalale HPF.
EQ LF CH 1-16
Dinani ndikugwira batani la Bank ndiyeno Arm batani. Sinthani zitsulo zapamwamba kuti musinthe LF freq/Q. Dinani mabatani apamwamba kuti musinthe pakati pa LF freq/Q. Sinthani zitsulo zapakati kuti musinthe phindu la LF. Dinani zitsulo zapakati kuti mulambalale LF. Gwiritsani ntchito kusintha kwa Mic kuti musinthe gulu la LF pakati pa Off/Pre/Post. Gwiritsani ntchito kusintha kwa Fav kuti musinthe gulu la LF pakati pa Peak ndi Shelf. Mukasintha ma tchanelo apamwamba kapena apakati a EQ, ma curve ake a EQ amawonetsedwa pa 8-mndandanda wa LCD.
EQ MF CH 1-16
Dinani ndikugwira batani la Bank kenako batani la Basi. Sinthani nsonga zapamwamba kuti musinthe MF freq/Q. Dinani mabatani apamwamba kuti musinthe pakati pa MF freq/Q. Sinthani zitsulo zapakati kuti musinthe kupindula kwa MF. Dinani zitsulo zapakati kuti mulambalale MF. Gwiritsani ntchito kusintha kwa Mic kuti musinthe band ya MF
pakati pa Off/Pre/Post. Mukasintha ma tchanelo apamwamba kapena apakati a EQ, ma curve ake a EQ amawonetsedwa pa 8-mndandanda wa LCD. EQ HF CH 1-16 Dinani ndikugwira batani la Bank kenako Dly batani. Sinthani zitsulo zapamwamba kuti musinthe HF freq/Q. Dinani mabatani apamwamba kuti musinthe pakati pa HF freq/Q. Tembenuzani mfundo zapakati kuti musinthe ma HF. Dinani zitsulo zapakati kuti mulambalale HF. Gwiritsani ntchito kusintha kwa Mic kuti musinthe gulu la HF pakati pa Off/Pre/Post. Gwiritsani ntchito kusintha kwa Fav kuti musinthe gulu la HF pakati pa Peak ndi Shelf. Mukasintha ma tchanelo apamwamba kapena apakati a EQ, ma curve ake a EQ amawonetsedwa pa 8-mndandanda wa LCD.
CH 1-16 NTCHITO YONSE
Sel toggle. Tembenukirani ndi/kapena kanikizani nsonga zapamwamba ndi zapakati kuti musinthe magawo osiyanasiyana a tchanelo.
CH 17-32 NTCHITO YONSE
Batani la banki + Sel toggle. Tembenukirani ndi/kapena kanikizani nsonga zapamwamba ndi zapakati kuti musinthe magawo osiyanasiyana a tchanelo.

CHANNEL AMASANKHA 1-32 (MAFAT CHANNELS)

Njira yamafuta ndi mawu omwe amagwiritsidwa ntchito nthawi zambiri m'makompyuta a digito kufotokoza momwe mungakhazikitsire magawo a tchanelo chosankhidwa. Ndizofanana ndi Channel Screen pa 8-Series. Ch 1-16 metres ikawonetsedwa, sunthani kumanja kulowera ku 'Sel' kuti musankhe njira yamafuta ya Ch 1-16. Mamita a Ch 17-32 akuwonetsedwa, sunthani kumanja kulowera ku 'Sel' kuti musankhe njira yamafuta ya Ch 17-32. Kuti mutuluke mu Fat Channel, dinani Meter kapena sunthani kusintha kwa tchanelo. Mukasankha njira yamafuta:

•  Mamita atchanelo osankhidwa amasintha kukhala maziko oyera.
•  Mamita a tchanelo osankhidwa pamodzi ndi nambala ya tchanelo ndi dzina zikuwonetsedwa kudzanja lamanzere mu Drive/Power Info Area.
•  Njira yosankhidwa ndi PFL'd. Mphete yake yolumikizana ndi poto ya LED ikunyezimira chikasu ndipo PFL 'n' ikunyezimira pamutu wam'mutu mu Main Info Area. Dinani batani la HP kuti musinthe pakati pa PFL ya tchanelo ndi HP yomwe ilipo. Izi zimakulolani kuti muyang'ane kusakaniza ngakhale pamene mukusintha magawo a tchanelo.
•  Mizere yam'mwamba ndi yapakati imasintha kupita ku zowongolera za tchanelo chosankhidwa zomwe ntchito zake zimafotokozedwa m'magawo apamwamba ndi apakati motere:

MTANDA WApakati (KUCHOKERA KUKUmanzere kupita kumanja):

•  Ch Name: Dinani batani kuti mubweretse kiyibodi ya Edit Channel Name pazithunzi za 8-Series. Gwiritsani ntchito kiyibodi ya USB kapena Select Knob, HP knob, ndi Toggle switch pafupi ndi ngodya yakumanja ya CL-16 kuti musinthe dzina la tchanelo (track).
•  Ch Gwero: Kanikizani batani kuti mubweretse chowonekera cha tchanelo pazithunzi za 8-Series. Kenako tembenuzani batani la Select kuti muwonetse gwero, kenako dinani kuti musankhe.
•  Dly/Polarity (Ch 1-16 only): Dinani knob kuti mutembenuzire polarity - chithunzi chamunda chimasintha kukhala chobiriwira chikatembenuzidwa. Tembenuzani konobo kuti musinthe kuchedwa kwa tchanelo.
•  Limiter: Dinani knob kuti mutsegule / kuzimitsa
•  HPF (Ch 1-16 only): Dinani knob kuti musinthe HPF kuyatsa/kuzimitsa. Sinthani chubu kuti musinthe ma frequency a HPF 3dB. Akayatsa, gawo ndi mphete yapakati pa mizere ya LED iwonetsa buluu wopepuka
•  LF Gain, LF Freq, LF Q, LF Type (Ch 1-16 yokha): Sinthani zitsulo kuti musinthe makhalidwe a LF band EQ. Dinani zitsulo zilizonse za 4 kuti mulambalale/kusalambalala LF band. Mukasadutsidwa, minda ndi mizere yapakati ya ma LED amawonetsa lalanje.
•  MF Gain, MF Freq, MF Q (Ch 1-16 only): Tembenuzirani mfundo za MF band EQ. Dinani iliyonse mwa ma knobs atatu kuti mulambalale/kusalambalala MF band. Mukasadutsidwa, minda ndi ma LED okhala ndi mizere yapakati amawonetsa chikasu.
•  Kupindula kwa HF, HF Freq, HF Q, HF Type (Ch 1-16 kokha): Sinthani zitsulo kuti musinthe mayendedwe a HF band EQ. Dinani ma knobs aliwonse 4 kuti mulambalale/kusalambalalitsa gulu la HF. Mukasadutsidwa, minda ndi ma LED okhala ndi mizere yapakati amawonetsa zobiriwira

Mzere Wapamwamba (KUCHOKERA KUmanzere KUPITA KULADRO):

• B1 - B10 Send: Dinani knob kuti musinthe mabasi osankhidwa pakati pa Off, Prefade (green), Postfade (lalanje), ndi Send (buluu wowala). Mukayikidwa ku Send (bulau wowala), tembenuzani konobo kuti musinthe phindu la tchanelo ku basiyo.
• EQ Routing (Ch 1-16 only): Tembenuzani knob kuti musankhe ngati EQ iyikidwa kale kapena postfade kapena kuzimitsa.
• AMix: Dinani (Ch 1-16 kokha) knob kuti musankhe njira ya automixer. Zolemba zam'munda zimakhala zotuwa ngati automixer yayimitsidwa, chibakuwa cha Dugan chimayatsidwa ndi chobiriwira ngati MixAssist yayatsidwa. Kwa Ch 17-32 AMix imasinthidwa ndi Trim gain. Tembenuzani kuti musinthe tchanelo chocheperako.
• Pan: Tembenuzirani mfundo kuti musinthe poto. Dinani knob kuti pakati poto
• BusL, BusR: Dinani knob kupita ku Basi L, R , prefade (green), postfade (lalanje), kapena osayendetsedwa (kuchoka).

Momwe mungapangire CL-16 kukhala ngati chosakaniza cha analogi

Mzere wosakaniza wa analogi umaphatikizapo trim, fader, solo, bubu, pan ndi EQ. CL-16 imamvanso chimodzimodzi ndi ma faders ake odzipatulira, ma trims, solos (PFLs), ndi osalankhula. Pokhazikitsa CL-16 kukhala mawonekedwe a EQ mwachitsanzo LF EQ (Hold Bank ndiye Arm), koboti yakumtunda ndi yapakati ya tchanelo imapatsa mwayi wowongolera EQ ndikupatsanso mawonekedwe amtundu wa analogi.

Zotsatira
Mumitundu yonse kupatula Fat Channel, EQ ndi Mabasi Amatumiza pamitundu ya Faders, tembenuzani nsonga zapamwamba kuti musinthe zomwe mwapeza ndikudina ziboda zapamwamba kwinaku mukugwira Menyu kuti mutonthoze zotuluka.

Kuyendetsa Magalimoto

IMANI
Dinani kuti musiye kusewera kapena kujambula. Batani loyimitsa limawunikira chikasu likayimitsidwa. Ikayimitsidwa, dinani kuyimitsa kuti muwonetse chotsatira cha LCD.
LANDIRANI
Dinani kuti muyambe kujambula chatsopano. Batani lojambulira ndi Main Info Area zimawunikira pojambula.
Chidziwitso: Kubweza, Sewerani ndi Kuthamanga Kwachangu kumawongolera kusakhazikika kwa mabatani a U1, U2, ndi U3, motsatana.

Mabatani a Mode

Onani Ma modes/ mita Views pamwambapa kuti mudziwe zambiri.
PAN/HPF Dinani poto kuti musinthe zitsulo zapakati kukhala zowongolera poto. Mukugwira Bank/ALT, dinani poto kuti musinthe ma knobs apakati kukhala zowongolera za HPF.
ARM/LF Dinani ndikugwira Arm kuti muwonetse momwe dzanja lilili pamakona, kenako dinani batani kuti musinthe mkono / kuchotsa zida. Mukugwira Bank/ALT, dinani
Mkono kusintha ma knobs apamwamba ndi apakati ku zowongolera za LF EQ.
BANK/ALT Dinani kuti muwonetse ndi kuwongolera Ch 17-32.
BASI/MF Dinani kuti muwone ndikuwongolera mabasi. Mutagwira Bank/ALT, kanikizani Basi kuti musinthe ma knobs apamwamba ndi apakati kuti aziwongolera a MF EQ.
DLY/HF Dinani kuti musinthe nsonga zapakati kuti muchedwetse ndi zowongolera za polarity. Mukugwira Bank/ALT, dinani Dly kuti musinthe ma knobs apamwamba ndi apakati kuti aziwongolera HF EQ.

Mabatani a Metadata

• Imasintha metadata pazapano kapena zina. Pamene mukujambula, metadata yapano imasinthidwa. Ikayimitsidwa, chojambulidwa chomaliza kapena metadata yotsatira ikhoza kusinthidwa. Mukakhala muyimidwe, dinani Imani kuti musinthe pakati pa kusintha komwe kukuchitika ndi kotsatira.
• SCENE Press kuti musinthe dzina la chochitika. Mukujambula, zomwe zikuchitika pano zimasinthidwa. Itayimitsidwa, chojambulidwa chomaliza kapena chojambula chotsatira chikhoza kusinthidwa. Muli m'malo oyimitsa, dinani kuima kuti musinthe pakati pakusintha zomwe zikuchitika komanso zomwe zikubwera.
• TAKE Press kuti musinthe nambala ya take. M'kaundula, nambala yomwe atenga pano yasinthidwa. Poyimitsa, chojambulidwa chomaliza kapena nambala yotengera chotsatira ikhoza kusinthidwa. Muyimitsa, dinani kuima kuti musinthe pakati pa kusintha nambala yapano ndi yotsatira.
• ZOYENERA Dinani kuti musinthe zolemba. M'kaundula, zolemba zapano zasinthidwa. Poyimitsa, kujambula komaliza kapena zolemba zina zitha kusinthidwa. Mukayima, dinani kuima kuti musinthe pakati pakusintha zomwe mwalemba pano ndi zina.

Mabatani Opatsidwa Ogwiritsa Ntchito

CL-16 imapereka mabatani asanu oyambira ogwiritsa ntchito, U1 mpaka U5 kuti mupeze mwachangu ntchito zisanu zomwe mumakonda. Ntchito zomwe zajambulidwa ku mabataniwa zafotokozedwa m'magawo a Zofotokozera za Batani la Wogwiritsa pa LCD's Main Info Area. Perekani ntchito ku mabataniwa mu Controllers> Mapping> Phunzirani mode. Njira zazifupi zowonjezera zisanu (zokwana khumi) zitha kupezeka pogwira batani la Bank/Alt kenako kukanikiza U1-U5. Lembani izi pogwira Alt kenako batani la U mu Mapu> Phunzirani mode. Zosintha zina / mabatani kumanja kwa CL-16 zitha kujambulidwa kuchokera pamenyu.

Kubwerera / Com Mabatani
Dinani kuti muwone zobwerera mu mahedifoni. Mukamagwiritsa ntchito Scorpio, yang'anani Com Rtn 2 ndikukanikiza Com Rtn ndikukanikiza HP knob. Batani la Com Rtn limaunikira zobiriwira mukamayang'anira Com Rtn 2 ndi lalanje mukamawunika Com Rtn 1. Press Com 1 kuti mutsegule kulumikizana kwa Com 1. Dinani Com 2 kuti muyambitse kulumikizana kwa Com 2.

batani la mita
Dinani kuti mutuluke ndikubwerera ku HP yomwe ilipo kuti mubwerere ku ch 1-16 mita yakunyumba view.

Menyu batani
Dinani kuti mulowe menyu. Gwirani Menyu kenako dinani chepetsa poto kuti mutseke tchanelo. Gwirani Menyu kenako dinani encoder ya pamzere wapamwamba kuti mutonthoze zotulutsa (pamene mizere yam'mwamba ikuwonetsa zotuluka) Gwirani Menyu kenako dinani encoder yapakati pamzere wamabasi kapena encoder ya mzere wapamwamba mu Bus Send on Faders Mode kuti mutsegule basi. Gwirani Menyu ndikusuntha zosintha za PFL kumanzere kuti mupeze mindandanda yazakudya monga zafotokozedwera mu System>Menyu+PFL Sinthani zochita menyu. Imatsimikizira nthawi yomwe ntchitoyo iyambika. Kugwira chinthu chomwe mwasankha kwautali wopitilira nthawi yofikira kudzasintha kuti izi zichitike kwakanthawi.

Zofotokozera

Mafotokozedwe atha kusintha osadziwitsidwa kale. Kuti mumve zambiri pazopangidwa ndi Sound Devices, pitani ku webtsamba: www.machidoma.com.

• VOLTAGE
  10-18 V DC pa XLR-4. Pini 4 = +, pini 1 = nthaka.
• TSOPANO TSOPANO (MIN)
  560 mA quiescent pa 12 V DC mkati, madoko onse a USB adasiyidwa otseguka
• TSOPANO TSOPANO (MID)
  2.93 A, madoko a USB okwana 5A
• TSOPANO TSOPANO (MAX)
  5.51 A, madoko a USB okwana 10A
• USB-A PORTS
  5 V, 1.5 A aliyense
• Madoko a USB-C
  5 V, 3 A aliyense
• MALO Akutali, MPHAMVU
  5 V, 1 A ikupezeka pa pin 10
• MA PORTS Akutali, INPUT
  60 k ohm zolowetsamo Z. Vih = 3.5 V min, Vil = 1.5 V max
• MA doko Akutali, ZOPHUNZITSA
  100 ohm zotuluka Z zikakonzedwa ngati zotuluka
• KUSINTHA KWA PHAZI
  1 k ohm zolowetsamo Z. Lumikizani pansi kuti mugwire ntchito (yotsika yotsika).
• KULEMERA:
  • 4.71kg pa
  • (10 lbs 6 oz)
• KUKHALA: (HXWXD)
  • CHIKHALIDWE CHAPITIKA PASI
    • 8.01cm X 43.52cm X 32.913cm
    • (3.15 mu. X 17.13 mkati. X 12.96 mkati.)
  • SKREEN AKUPITIKA
    • 14.64cm X 43.52cm X 35.90cm
    • (5.76 mu. X 17.13 mkati. X 14.13 mkati.)

Kutumikira Faders

CL-16 imakhala ndi ma fader a Penny & Giles omwe atha kugwiritsidwa ntchito m'munda. Ma faders amatha kusinthidwa mwachangu ndi khama lochepa.
KUSINTHA M'MALO FADER:
Penny & Giles 104 mm Linear Manual Fader PGF3210

KUCHOTSA FADER:

• CHOCHITA 1 Chotsani knob ya fader pokukoka pang'onopang'ono u
• CHOCHITA 2 Chotsani zomangira zomwe zimagwira fader pamalo ake. Mmodzi pamwamba
• CHOCHITA 3 Yendetsani chigawocho kuti mulowe pa doko la fader. Chotsani zomangira ziwiri ndikuchotsa chivundikirocho
• CHOCHITA 4 Lumikizani zolumikizira zamagetsi za fader pokoka modekha.
• CHOCHITA 5 Chotsani fader.
  • KUTI MUYIKIRE FADER YATSOPANO SINTHA ZOCHITA ZAKAMBIRI:
• CHOCHITA 6 Lowetsani fader yatsopano. Sinthani ndi Penny & Giles 104 mm Linear Manual Fader PGF3210.
• CHOCHITA 7 Lumikizaninso zolumikizira zamagetsi za fader.
• CHOCHITA 8 Bwezerani zitsulo zakumbuyo ndi zomangira kumbuyo.
• CHOCHITA 9 Bwezerani zomangira ziwiri za fader.
• CHOCHITA 10 Bwezerani mfundo ya fader

Zolemba / Zothandizira

Zipangizo ZA SOUND CL-16 Linear Fader Control Surface [pdf] Buku Logwiritsa Ntchito CL-16, Linear Fader Control Surface, CL-16 Linear Fader Control Surface

Maumboni

• Buku Logwiritsa Ntchito