NA'urorin Sauti CL-16 Fader Control Fader Linear Linear

GABATARWA

Barka da zuwa CL-16

CL-16 Linear Fader Control Surface don 8-Series ya haɗu da sauƙi na na'urorin analog na gargajiya tare da iko da sassaucin kayan aikin dijital. Wannan filin sarrafa bespoke yana haɓaka ƙwarewar haɗaɗɗen katako tare da aikin sa mai hankali, 16 silky-smooth faders, 16 ƙwaƙƙwaran trims, da babban panoramic LCD. Duk waɗannan an ƙera su da kyau cikin ƙaƙƙarfan yanki mai faɗi 16.3” wanda ya dace a cikin keken hannu kuma yana aiki daga 12 V DC.

• Mai jituwa tare da 833, 888, da Scorpio
•  16 sadaukarwar sarrafawa datsa
•  16 masu sadaukar da kai
•  Falsafar ƙira mai fa'ida inda tashoshi 1-16 suka sadaukar, sarrafa marasa banki kamar na'urar wasan bidiyo na gargajiya na analog, da sauran mahimman fasalulluka na iya shiga cikin sauri.
•  32 masu sarrafa juzu'i masu yawa don EQ, kwanon rufi, ribar tashoshi 17-32, ribar bas, ribar fitarwa, da ƙari.
•  Babban, allon LCD mai karanta hasken rana yana ninka ƙasa don sauƙi da amintaccen ajiya da sufuri
•  Sabon babban abin dogaro, shiru, maɓallan taɓawa mai taushi don ayyuka masu mahimmanci kamar rikodin, tsayawa, metadata, coms, dawowa, da ƙari.
•  Maɓallai guda biyar waɗanda za a iya raba masu amfani
• Ginin tashar USB mai tashar tashar jiragen ruwa 5 tare da (USB-C biyu da USB-A uku) don maɓallan madannai, kwamfutar hannu-SD-remote, da sauran abubuwan kebul na USB.
•  1/4" da 1/8" jakunan kunne
•  Mai haɗin 10-Pin mai nisa don yin wayoyi na al'ada na LEDs da masu sauyawa, tare da shigar da ƙafar ƙafa 1/4
•  Haɗa ta hanyar USB-B
•  12V DC mai ƙarfi ta hanyar 4-pin XLR (ba a haɗa shi ba)
•  16 ultra-smooth gliding Penny & Giles 100 mm masu fa'ida madaidaiciya - mafi kyawun ji a kasuwa
•  Saurin samun dama ga kwamitin kasa don hidimar filin fader

Panel Views

TOP

1.  PENNY & GILES FADERS
   Yana daidaita matakan fader don tashoshi 1-16. - Inf zuwa +16 dB fader kewayon. Ana nuna ribar Fader akan LCD.
2.  PFL/SEL TOGGLE SWITCHES
   Matsar da juzu'i zuwa hagu, PFLs zaɓaɓɓen tashar ko keɓance bas lokacin cikin Yanayin Bus. Matsar da toggle zuwa dama yana zaɓar yanayin saitin tashar (akalla FAT channel) ko zaɓi bas aika akan yanayin fader lokacin da ke cikin Mode Bus.
3.  GYARA POTS W/ RING LEDS
   Juyawa don daidaita ribar datsa don tashar ta 1-16. Ana nuna ribar datsa a cikin LCD. Latsa yayin riƙe Menu don yin shiru/cire tashoshi 1-16. Kewaye LED LEDs suna ba da alamar gani na matakin siginar tashar, PFL, bebe, da matsayi na hannu.
   •  Maɓallin ƙarfin kore, rawaya/orange, da ja don matakin sigina, gabanin/bayan fade iyakance aiki da yanke bi da bi.
   •  Yawu mai walƙiya = tashar PFL'd.
   •  Blue = tashar ta rufe
   •  Ja = tashar makamai.
4. MULKI MAI AIKI MULKI NA TSAKIYA W/RING LEDS
   Rotary/latsa ƙulli tare da ayyuka da yawa dangane da yanayin da aka zaɓa. Ana nuna ƙima da matsayi akan layi na biyu na LCD. Juyawa ko danna don daidaitawa ko jujjuya sigogi daban-daban. LEDs na zoben da ke kewaye suna nuna bayanin matsayi iri-iri
5. KNOBS MULTI-AIKI NA BABA W/RING LEDS.
   Rotary/latsa ƙulli tare da iyakoki da yawa dangane da yanayin da aka zaɓa. Ana nuna ƙima da matsayi a saman jere na LCD. Juyawa ko danna don daidaitawa ko jujjuya sigogi daban-daban. LEDs na zoben da ke kewaye suna nuna bayanin matsayi iri-iri
6. HANYAR TSAYA
   Dakatar da rikodi ko sake kunnawa. Danna Tsayawa yayin da aka dakatar da juyawa zuwa nuna sunan ɗauka na gaba a cikin LCD don daidaitawa tare da Maɓallan Scene, Take, Notes.
7.  KARANTA MAGANAR
   Fara sabon rikodi. Yana haskaka ja yayin yin rikodi.
8.  MAGANAR KYAUTA
   Yana zaɓar hanyoyi daban-daban don tantance menene mita da sauran bayanan da aka nuna akan LCD da aikin kullin ayyuka masu yawa na jere da na tsakiya da PFL/Sel toggle masu sauyawa.
9.  METADATA BUTTONS
   Maɓallin gajeriyar hanya don saurin gyara metadata. Shirya Scene, Take da Bayanan kula don ɗaukan halin yanzu ko na gaba. Ƙara sunan wuri, da'irar ɗauka ko share rikodin ƙarshe (ƙarar ɗaukar hoto).
10.  MATSALOLIN MAI AMFANI
    Mai amfani-taswira zuwa ayyuka daban-daban don saurin isa ga ayyukan taswira ana nuna su a sama a cikin LCD
11. MAYARWA MATSAYI
    Maɓallin sadaukarwa don sa ido kan dawowa daban-daban a cikin belun kunne
12.  COM AIKA BUTTANA
    Danna don magana. Yana tafiyar da mic ɗin da aka zaɓa zuwa wuraren da aka saita a cikin menus na Aika Rarrabawa.
13.  BUTUN MATA
    Latsa don komawa zuwa tsohon LCD na gida view da kuma saitattun HP na yanzu. Hakanan yana kwafin ayyukan maɓallin Mita akan 8-Series gaban panel.
14.  MUTU BUTTON
    Yana kwafin ayyukan da aka sanya na maɓallin Menu akan ɓangaren gaba na 8-Series. Rike sannan danna tukunyar datsa tashoshi don kashe wannan tashar. Hakanan ana amfani da shi don kashe bas ɗin bas da abubuwan fitarwa ta hanyoyin da suka dace
15.  KYAUTA KYAUTA
    Yana kwafin ayyukan da aka keɓance na masu sauya juzu'i uku a ƙasan LCD na gaba mai lamba 8.
16.  KUNGIYAR GIDAN GASKIYA
    Yana kwafin ayyukan kullin wayar kai akan LCD na gaba mai lamba 8. A kan Scorpio, riƙe yayin danna maɓallin Com Rtn don kunnawa / kashe sa ido na Com Rtn 2 a cikin belun kunne. Danna lokacin da tashar ko bas ke keɓance don juyawa zuwa saitin lasifikan kai na yanzu. Rike yayin sake kunnawa don shigar da yanayin gogewar sauti.
17.  Zaɓi KNOB
    Kwafi ayyukan ƙulli na Zaɓi akan LCD na gaba mai lamba 8.
18.  LITTAFIN RANA MAI KARATUN FOLD-OWN LCD
    Nunin launi mai haske na ƙididdigewa, sigogi, yanayi, sufuri, lambar lokaci, metadata da ƙari. An saita Hasken LCD a Menu>Masu Gudanarwa>CL-16> Menu na Haske na LCD.

KASA

BAYA

GABA

NUNA LCD

1.  BAYANIN BAYANIN KWALLIYA
   Yana bayyana aikin maɓallan sarrafa manyan layuka masu yawa. Ayyukan yana canzawa dangane da yanayin da aka zaɓa.
2.  BAYANIN KARSHEN TSAKIYA
   Yana bayyana aikin maƙallan kula da layuka masu yawa na tsakiya. Ayyukan yana canzawa dangane da yanayin da aka zaɓa.
3.  FILIN TSAKIYA
   Yana nuna mahimman bayanai na kowane tashoshi ko bas dangane da waɗanne sigogin da ake daidaita su ta amfani da kullin layin tsakiya kamar Pan, Delay, HPF, EQ, Ch 17-32, Ribar Bus, Hanyar Bus, Bus Aika, Madaidaitan Tashoshin FAT da ƙari.
4.  FILIN LAYYA NA BABA
   Nuna bayanai masu dacewa ga kowane tashoshi, bas, ko fitarwa dangane da waɗanne sigogi ake daidaita su ta amfani da kullin jeri na sama kamar Fitar da Fitowa, HPF, EQ, Bus Gain, Hanyar Bas, Aika Bus, Matsalolin Tashar FAT da ƙari.
5.  BABBAN BAYANI
   Yana nuna bayanai daban-daban ciki har da ma'aunin LR, ƙidayar lokaci, metadata, da ƙari. Launin bango yana canzawa dangane da yanayin sufuri kamar haka:
   Jar baya = yin rikodi
   Baƙar fata = tsayawa
   Koren bango = wasa
   Koren bango mai walƙiya = sake kunnawa
   • Blue bango = FFWD ko REW
6.  BABBAN LR MIX METERS
   Yana nuna manyan mitoci masu haɗa bas na LR da matsayi na rikodi.
7.  Ɗauki SUNA
   Nuna kuma gyara Sunan Take na yanzu. Danna Tsaya yayin da aka tsaya don nuna sunan ɗauka na gaba.
8.  SUNA FUSKA
   Nuna kuma shirya sunan Scene na yanzu. Danna Tsaya yayin da aka tsaya don nuna sunan na gaba.
9.  Ɗauki NUMBER
   Nuna kuma shirya lambar Take na yanzu. Danna Tsaya yayin da aka tsaya don nuna lambar Take na gaba.
10.  BAYANI
    Nuna kuma shirya lambar bayanin kula na Take na yanzu. Danna Tsaya yayin da aka tsaya don nuna bayanin kula na gaba.
11.  MALAMAI MAI AMFANI 1-5 BAYANI
    Yana nuna sunayen gajerun hanyoyin da aka tsara zuwa maɓallan U1 – U5.
12.  TIMECODE COUNTER
    Yana nuna lambar lokaci na yanzu yayin rikodin da tsayawa da lambar lokacin sake kunnawa yayin wasa.
13.  CIKAKKEN DA SAURAN LOKACI
    Yana nuna lokacin da ya wuce yayin rikodin da sake kunnawa. A yayin sake kunnawa, sauran lokacin ɗaukar abin yana nuna bayan ''/'.
14.  KYAUTATA FRAME
    Yana nuna ƙimar firam ɗin lokaci na yanzu.
15.  HP PRESET
    Yana Nuna tushen tushen HP da aka zaɓa a halin yanzu da ƙarar HP lokacin da kullin HP ya daidaita.
16.  SYNC/SAMPLE RATE
    Yana nuna tushen daidaitawa na yanzu da sampku rate.
17.  MAYARWA MATA
    Yana nuna ma'auni don tashoshi biyu na kowace siginar dawowa.
18.  CHANNEL KO FILIN SUNA BUS
    Nuna sunan tashar, datsa, da fader ribar lokacin viewtashoshi mita. Nuna lambar bas da ribar bas lokacin viewmita bas. Waɗannan filayen suna canza launi kamar haka:
    •  Baƙar fata/ rubutu mai launin toka = tashar kashewa
      ko kuma ba a zaɓi tushen ba.
    •  Bayanin launin toka/fararen rubutu = tashoshi/bas a kunne da kwance damara.
    •  Jajayen bango/rubutu fari = tasha/bas a kunne da makamai.
    •  Blue bango/rubutu fari = tashoshi/bas ya soke.
19.  TAshoshi masu alaƙa
    Ana haɗe filayen bayanin tashoshi lokacin da aka haɗa tashoshi.
20.  MATAKIN CHANNEL KO BUS
    Yana nuna tashoshi ko ma'aunin bas dangane da yanayin da aka zaɓa.
21.  LABARI MAI KYAUTA CH. MALAMAN GROUP
    Tashoshi masu alamar launi iri ɗaya an haɗa su. Zaɓi wane launi ya shafi ƙungiya a cikin CL-16>Menun Launi na Ƙungiya.
22.  METER VIEW SUNAN
    • Nuna '1-16' lokacin viewing Channel 1-16 mita
    • Nuna '17-32' lokacin viewing Channel 17-32 mita
    • Nuna sunan tashar lokacin viewa tashar FAT
    • Nuna 'Bas' lokacin viewmita bas
    • Nuna Bus No. lokacin viewYanayin aika bas-on-faders
23.  YANKIN BAYANIN TUKI/POWER
    • Nuna SSD, SD1, da SD2 sauran lokacin rikodin.
    • Nuna 8-Series da CL-16 tushen kiwon lafiya da voltage.

Haɗa zuwa Mai Rakodin-Cikin-Series 8

•  Yin amfani da kebul na USB-A da aka kawo zuwa kebul na USB-B, haɗa tashar USB-A-8-Series zuwa tashar CL-16 USB-B.
•  Haɗa jack ɗin lasifikan kai na 8-Series' 1/4" TRS zuwa jack ɗin CL-16's 1/4" TRS "Zuwa 8-Series Headphone Out" ta amfani da kebul da aka kawo.
•  Haɗa tushen wutar lantarki 10-18 V DC ta amfani da XLR mai 4-pin (F) zuwa shigar da DC na CL-16. Ba a haɗa tushen wutar lantarki ba.
•  Ƙarfi a kan Mai rikodin Mixer-Series 8. Koma zuwa dace Jagorar mai amfani mai jeri 8 don duk umarnin aiki da cikakkun bayanai.

Kunnawa/Kashewa

•  Ƙarfi a kan Mai rikodin Mixer-Series 8. Da zarar 8-Series ya kunna, zai fara ta atomatik CL-16.
•  Don kashe wuta, kawai danna maɓallin kunna wutar lantarki 8-Series zuwa wurin kashewa. CL-16 kuma za ta yi ƙarfi

Cire CL-16 daga 8-Series

Ana iya toshe CL-16 / cirewa daga 8-Series yayin da aka kunna shi ba tare da lahani ga ɗayan ɗayan ba. Lokacin da aka cire CL-16, ana nuna "Control Surface Unplugged" a cikin 8-Series LCD. Babu matakan da za su canza. A wannan gaba: Yi tsammanin canje-canjen matakin kwatsam idan ba a kunna masu Gudanarwa> Soft Fader / datsa ɗaukar hoto ba kamar yadda matakan sauti yanzu za a ƙayyade ta trims da fader akan 8-Series.

Ana ɗaukaka CL-16 Firmware

Lokacin da ya cancanta, CL-16 firmware ana sabunta ta atomatik lokacin sabunta firmware 8-Series. Sabunta firmware 8-Series PRG file ya ƙunshi bayanan sabuntawa don duka 8-Series da CL-16. Haɗa CL-16 zuwa 8-Series kuma tabbatar da cewa an haɗa su duka zuwa amintattun hanyoyin wutar lantarki. Sabunta firmware 8-Series ta amfani da tsarin al'ada. Idan akwai sabunta firmware na CL-16, za ta fara ta atomatik bayan 8-Series ya kammala aikin sabuntawa. Maɓallin tsayawa na CL-16 zai haskaka rawaya yayin da CL-16 ke ɗaukakawa. Da zarar sabuntawar CL-16 ya ƙare, haɗin 8-Series / CL-16 zai kunna kuma ya kasance a shirye don amfani.

Aiki Overview

CL-16 ya haɗu da fasalin tashar tashar mahaɗa ta gargajiya tare da damar ayyuka da yawa na mahaɗin dijital na zamani. Da zarar kun saba da sarrafawa iri-iri, hanyoyin daban-daban da mita masu alaƙa views, ɗimbin yuwuwar mahaɗa/ rikodi na 8-Series ɗinku zai bayyana. Duk ayyukan 8-Series (tashoshi, bas, abubuwan fitarwa, metadata menus, coms) ana iya sarrafa su daga CL-16. Kodayake yawancin bayanai ana nuna su akan CL-16 LCD, LCD na 8-Series har yanzu yana ba da bayanai masu amfani yayin aiwatar da wasu ayyuka kamar tuƙi, shigarwar rubutu.

• Tashar Tashar
  Babban ikon sarrafa tashoshi da mita LCD ɗinsu, sunaye, da ƙimarsu suna daidaitawa a cikin 'tsitsi' a tsaye kamar yadda ido zai iya motsawa ta halitta tsakanin sarrafa tashar da nuni.
• TSARIN CHANNEL 1-16
  An sadaukar da tukwane 16 datsa don daidaita ribar datsa don tashoshi 1-16. Babu ribar datsa don tashoshi 17-32. Juya tukunyar datsa don daidaita ribar sa kuma nuna ƙimar ribarsa a dB a cikin layin ƙasa na LCD. Datsa zoben tukunyar LEDs suna nuna matakin tashar (mai canzawa mai ƙarfi kore), iyakance pre/post fade (rawaya/orange), da yanke (ja).
• TSARIN CHANNEL 17-32
  Latsa Bank don canzawa zuwa Ch 17-32 sannan a juya babban ƙulli don daidaita ribar datsansa da nuna ƙimar ribarsa a dB a ƙasa da layin saman LCD.
• CHANNEL MUTES 1-16
  Latsa tukunyar datsa yayin riƙe Menu don kashe sautin tashoshi 1-16. Lokacin da aka kashe, LED zoben da datsa ya zama shuɗi.
• CHANNEL MUTES 17-32
  Latsa Banki don canzawa zuwa Ch 17-32 sannan danna maɓallin tsakiya yayin riƙe Menu don kashe sautin tashoshi 17-32. Lokacin da aka kashe, LED ɗin zobe na tsakiya yana juya shuɗi.
• FADERS CHANNEL 1-16
  16 Penny da Giles masu layi na layi suna sadaukar da su don daidaita fader riba don tashoshi 1-16. Zamar da fader don daidaita ribar sa kuma nuna ƙimar ribarsa a dB a cikin layin ƙasa na LCD
• FADERS CHANNEL 17-32
  Don haɗa tashoshi 17-32, danna Banki don canzawa zuwa Ch 17-32 sannan juya maɓallin tsakiya don daidaita ƙimar fader ɗin sa kuma nuna ƙimar ribarsa a dB a ƙasa da layin tsakiyar LCD.
• CHANNEL PFLS 1-16
  Lokacin da aka nuna mita Ch 1-16, matsar da juyawa hagu zuwa tashar PFL ta 1-16. Lokacin da tashar 1-16 ta kasance PFL'd, tana da alaƙa da datsa zoben tukunyar LED kyaftawar rawaya da PFL 'n' kiftawa a cikin filin lasifikan kai a cikin Babban Bayanin Bayani. Matsar da jujjuyawar hagu ko danna Mita don soke PFL kuma komawa zuwa saiti na HP na yanzu.
• CHANNEL PFLS 17-32
  Lokacin da aka nuna mita Ch 17-32 (ta danna banki), matsar da maɓallin hagu zuwa tashar PFL ta 17-32. Lokacin da tashar 17-32 ta kasance PFL'd, tana da alaƙa da ƙulli ta tsakiya LED kyaftawar rawaya da PFL 'n' kiftawa a cikin filin lasifikan kai a cikin Babban Bayanin Bayani. Matsar da jujjuyawar hagu ko danna Mita don soke PFL kuma komawa zuwa saiti na HP na yanzu.

Yanayin / Mita Views

CL-16 yana da nau'ikan aiki daban-daban (wanda aka jera a ƙasa). Canza yanayin amn yana canza aikin kullin ayyuka masu yawa kuma a wasu lokuta, yana canza Mita LCD View. Ana nuna aikin da/ko ƙimar maƙallan ayyuka masu yawa a cikin Filayen LCD na Sama da Tsakiyar Layi kuma a saman kusurwar hagu na bayanin.

CH 1-16 (Tsohon MATAKIN GIDA VIEW) 
Danna maɓallin Mita don komawa koyaushe zuwa wannan tsohuwar mitar gida view. Juya ƙulli na sama don daidaita ribar fitarwa; latsa ka riƙe Menu sa'an nan kuma danna maɓallin babba don kashe abin da ya dace.
CH 17-32 (BANK)
Danna Bank button. Maɓallin Banki yana lumshe kore da mita view canje-canje zuwa bangon kore. Juya ƙulli na tsakiya don daidaita fader Ch 17-32; latsa yayin riƙe Menu don yin shiru. Juyawa ƙulli na sama don daidaita ribar datsa Ch 17-32. Ana iya kashe banki zuwa Ch17-32 ta hanyar kewayawa zuwa Masu Gudanarwa> CL-16> Kashe Banki don Kunnawa.
PAN CH 1-16
Danna maballin Pan lokacin viewshafi na 1-16. Maɓallin kwanon rufi yana haskaka ruwan hoda. Juya ƙulli na tsakiya don daidaita kwanon ch 1-16; danna maɓalli zuwa kwanon rufi na tsakiya. Matsayin kwanon rufi yana nuni da sandar shuɗi a kwance. Juya ƙulli na sama don daidaita ribar fitarwa; latsa yayin riƙe menu don kashe abin da aka fitar.
PAN CH 17-32
Danna maballin Pan lokacin viewLittafin Ch 17-32. Maɓallin kwanon rufi yana haskaka ruwan hoda. Juya ƙulli na tsakiya don daidaita kwanon ch 17-32; danna maɓalli zuwa kwanon rufi na tsakiya. Matsayin kwanon rufi yana nuni da sandar shuɗi a kwance. Juya ƙulli na sama don daidaita ribar fitarwa; yayin riƙe menu don kashe abubuwan da aka fitar.
JINKILI/SIYASAR CH 1-16
Danna maɓallin Dly. Maɓallin Dly yana haskaka haske shuɗi. Juya ƙulli na tsakiya don daidaita ch 1-16 jinkiri; danna maɓalli don juya polarity. Juya ƙulli na sama don daidaita ribar fitarwa; latsa yayin riƙe menu don kashe abin da aka fitar.
ARM
Latsa ka riže Maɓallin Hannu (Hannukan za a iya jujjuya su lokacin riƙe maɓallin hannu kawai). Yana nuna matsayi na 1-16 na hannu akan LEDs zoben zoben datsa da tashar 17-32 matsayi na hannu akan LEDs na ƙulli na tsakiya. Ja yana dauke da makamai. Danna ƙwanƙwasa don kunna hannu/ kwance damara. A cikin yanayin Motoci (latsa Bus), latsawa da riƙe Hannun hannu yana nuna hannayen bas (Bas 1, Bus 2, Bus L, Bus R) akan LEDs na ƙulli na tsakiya. A cikin Motar Bus Akan Yanayin Faders, latsawa da riƙe Hannu yana nuna duk makamai: - Ch 1-16 hannaye akan LEDs zoben zoben tukunya, Hannun Ch 17-32 akan LEDs na ƙulli na tsakiya, da hannayen bas akan LEDs na ƙulli na sama.
LAMUN CHANNEL
Za a iya amfani da launukan tashoshi don taimakawa sauƙi ganowa da bambanta tsakanin tushen tashoshi. Ga kowane tashar 1-32, zaɓi launi daga Masu Gudanarwa>- CL-16> Menun Launukan Tashar. Ana amfani da launi da aka zaɓa zuwa bangon tashar tashar kuma ta soke tsoffin launukan masana'anta na launin toka na ch 1-16 da kore don ch 17-32. Lura: Ba a nuna launin tashoshi a cikin Bus Aika A Faders view.
BASOS
Latsa don nuna bas 1-10, L, R mita akan CL-16 LCD da Bus Roting screens akan maɓallin Bus LCD mai lamba 8 yana haskaka ruwan hoda mai haske. Juya ƙwanƙwasa na tsakiya don daidaita manyan nasarorin Bus L, R, B1 – B10; matsar da jujjuya hagu zuwa bas kadai; latsa yayin riƙe Menu don yin shiru. Juya ƙulli na sama don daidaita ribar fitarwa; latsa yayin riƙe Menu don kashe abubuwan da aka fitar.
BAS TA AIKA KAN FADERS CH 1-16
Latsa maɓallin Bus + Sel toggle. Motar bas ɗin ita kaɗai ce kuma ana nuna allon tafiyar da ita akan LCD-jeri 8. Maɓallin Bus yana lumshe ruwan hoda mai haske da mita view ya canza zuwa bango mai haske shuɗi. Danna maɓallin tsakiya don hanyar Ch 1-16 zuwa gabanin bas (kore), bayan fare (orange) ko ta hanyar aika riba (shuɗi mai haske). Lokacin da aka saita don aika riba, juya ƙulli na tsakiya don daidaita ribar aika. Danna maɓallin Banki don samun damar aika saƙonnin ch 17- 32. Juya ƙulli na sama don daidaita ribar babban Bus; latsa maɓalli na sama don kashe bas ɗin shiru.
BAS TA AIKA KAN FADERS CH 17-32
Danna maɓallin Bus + Sel kunna lokacin viewLittafin Ch 17-32. Motar bas ɗin ita kaɗai ce kuma ana nuna allon tafiyar da ita akan LCD-jeri 8. Maɓallin Bus yana lumshe ruwan hoda mai haske da mita view ya canza zuwa bango mai haske shuɗi. Latsa maɓallin tsakiya don hanyar Ch 17-32 zuwa gabanin bas (kore), postfade (orange) ko ta hanyar aika riba (shuɗi mai haske). Lokacin da aka saita don aika riba, juya ƙulli na tsakiya don daidaita ribar aika. Danna maballin Banki don samun damar aika aika
Ch 1-16. Farashin CH1-16
Danna kuma ka riƙe maɓallin Banki sannan maɓallin Pan. Juya manyan ƙullun don daidaita saurin HPF. Danna maɓallin tsakiya don kewaya HPF.
EQ LF CH 1-16
Latsa ka riƙe maɓallin Banki sannan maɓallin hannu. Juya manyan ƙullun don daidaita LF freq/Q. Danna saman ƙugiya don kunna tsakanin LF freq/Q. Juya ƙulli na tsakiya don daidaita ribar LF. Danna maɓallin tsakiya don keɓance LF. Yi amfani da mic jujjuya don canza band ɗin LF tsakanin Kashe/Pre/Post. Yi amfani da Fav jujjuya don kunna band ɗin LF tsakanin Peak da Shelf. Lokacin daidaita kullin EQ na sama ko na tsakiya, ana nuna madaidaicin EQ ɗin sa akan LCD-jeri 8
EQ MF CH 1-16
Latsa ka riƙe maɓallin Banki sannan maɓallin Bus. Juyawa saman ƙulli don daidaita MF freq/Q. Latsa saman ƙugiya don kunna tsakanin MF freq/Q. Juya ƙulli na tsakiya don daidaita ribar MF. Danna maɓallin tsakiya don kewaya MF. Yi amfani da maɓallin mic don sauya band ɗin MF
tsakanin Off/Pre/Post. Lokacin daidaita kullin EQ na sama ko na tsakiya, ana nuna madaidaicin EQ ɗin sa akan LCD-jeri 8. EQ HF CH 1-16 Latsa ka riƙe maɓallin Banki sannan maɓallin Dly. Juyawa saman ƙulli don daidaita HF freq/Q. Latsa saman ƙugiya don kunna tsakanin HF freq/Q. Juya ƙulli na tsakiya don daidaita ribar HF. Danna maɓallin tsakiya don kewaya HF. Yi amfani da jujjuyawar mic don canza ƙungiyar HF tsakanin Kashe/Pre/Post. Yi amfani da Fav jujjuya don kunna ƙungiyar HF tsakanin Peak da Shelf. Lokacin daidaita kullin EQ na sama ko na tsakiya, ana nuna madaidaicin EQ ɗin sa akan LCD-jeri 8.
CH 1-16 FAT CHANNELS
Sel kunna. Juyawa da/ko danna maɓallin sama da na tsakiya don daidaita sigogin tashoshi daban-daban.
CH 17-32 FAT CHANNELS
Maɓallin banki + Sel kunnawa. Juyawa da/ko danna maɓallin sama da na tsakiya don daidaita sigogin tashoshi daban-daban.

CHANNEL YA ZABI 1-32 (KATASHIN FAT)

Tashar mai kitse kalma ce da ake yawan amfani da ita a cikin consoles na dijital don kwatanta yanayin nuni don saita sigogi don tashar da aka zaɓa. Yana daidai da allon Channel akan 8-Series. Lokacin da aka nuna mita Ch 1-16, matsar da jujjuya dama zuwa 'Sel' don zaɓar tashar mai mai Ch 1-16. Lokacin da aka nuna mita Ch 17-32, matsar da maɓallin dama zuwa 'Sel' don zaɓar tashar mai kitse don Ch 17-32. Don fita tashar Fat, danna Mita ko sake matsar da tashar dama. Lokacin da aka zaɓi tashar mai:

•  Mitar tashar da aka zaɓa tana canzawa zuwa farin bango.
•  Mitar tashar da aka zaɓa tare da lambar tashar da sunan ana nunawa a gefen hagu a cikin Wurin Bayanin Drive/Power
•  Tashar da aka zaɓa PFL'd. Zoben datse tukunyar sa mai alaƙa LED yana ƙyalli rawaya da PFL 'n' kiftawa a cikin filin lasifikan kai a Babban Babban Bayani. Latsa maɓallin HP don kunna tsakanin PFL ta tashar da saiti na HP na yanzu. Wannan yana ba ku damar saka idanu akan haɗuwa ko da lokacin daidaita sigogi don tashar.
•  Ƙwayoyin jere na sama da na tsakiya suna canzawa zuwa madaidaitan ma'auni na tashar da aka zaɓa waɗanda aka bayyana ayyukansu a cikin filaye na sama da na tsakiya kamar haka:

LAYYA TA TSAKI (DAGA HAGU ZUWA DAMA):

•  Sunan Ch: Danna maɓalli don kawo maɓallin madannai na Editan Tashar Sunan tashar tashar a cikin nunin 8-Series. Yi amfani da madannai na USB ko Zaɓi Knob, kullin HP, da Maɓallin Juya kusa da kusurwar hannun dama na ƙasa na CL-16 don shirya sunan tashar (waƙa).
•  Ch Source: Danna ƙwanƙwasa don ɗaga allon Tushen tashar a nunin jerin 8. Sa'an nan kuma juya maɓallin Zaɓi don haskaka tushen, sannan danna don zaɓar ta.
•  Dly/Polarity (Ch 1-16 kawai): Danna maɓalli don juyar da polarity - Alamar filin tana canzawa zuwa kore idan an juya. Juya ƙugiya don daidaita jinkirin shigarwar tashar.
•  Iyakance: Danna ƙwanƙwasa don kunna mai iyakancewa
•  HPF (Ch 1-16 kawai): Danna maɓalli don kunna/kashe HPF. Juya ƙwanƙwasa don daidaita mitar mirgina HPF 3dB. Lokacin kunnawa, filin da tsakiyar jeri na LED zai nuna shuɗi mai haske
•  LF Gain, LF Freq, LF Q, Nau'in LF (Ch 1-16 kawai): Juya kulli don daidaita ƙimar EQ band LF. Latsa kowane ƙwanƙwasa 4 don kewayawa/cire keɓantaccen band ɗin LF. Lokacin da ba a wuce gona da iri, filayen da LEDs na jeri na tsakiya suna nuna lemu.
•  MF Gain, MF Freq, MF Q (Ch 1-16 kawai): Juyawa ƙulli don daidaita ƙimar MF band EQ. Latsa kowane ƙwanƙwasa 3 don kewayawa/cire ƙetare bandejin MF. Lokacin da ba a wuce gona da iri, filaye da LEDs na zobe na tsakiya suna nuna rawaya.
•  HF Gain, HF Freq, HF Q, Nau'in HF (Ch 1-16 kawai): Juya ƙulli don daidaita ƙimar HF band EQ. Latsa kowane ƙwanƙwasa 4 don kewayawa/cire kewayon band ɗin HF. Lokacin da ba a wuce gona da iri, filaye da LEDs na zobe na tsakiyar layi suna nuna kore

LAYYA BABA (DAGA HAGU ZUWA DAMA):

• B1 – B10 Aika: Danna maɓalli don kunna zaɓin aika bas ɗin da aka zaɓa tsakanin Kashe, Prefade (kore), Fade (orange), da Aika (shuɗi mai haske). Lokacin saita zuwa Aika (mai haske shuɗi), juya ƙulli don daidaita ribar aika tashar zuwa waccan bas ɗin.
• Hanyar EQ (Ch 1-16 kawai): Juya ƙulli don zaɓar ko an yi amfani da EQ prefade ko bayan fade ko kuma a kashe.
• AMix: Latsa (Ch 1-16 kawai) ƙwanƙwasa don zaɓar tashar don automixer. Rubutun filin launin toka ne idan an kashe automixer, an kunna shuɗin Dugan kuma kore idan an kunna MixAssist. Don Ch17-32 an maye gurbin AMix tare da Trim riba. Juyawa don daidaita zaɓaɓɓun hanyoyin datsa riba.
• Pan: Juya ƙugiya don daidaita kwanon rufi. Danna ƙwanƙwasa zuwa kwanon rufi na tsakiya
• BusL, BusR: Danna maɓalli don hanya zuwa Bus L, R , prefade (kore), bayan fare (orange), ko ba a kashe (kashe).

Yadda ake sa CL-16 ya ji kamar mahaɗin analog

Tashar tashar mahaɗar analog yawanci ya haɗa da datsa, fader, solo, bebe, kwanon rufi da EQ. CL-16 yana da irin wannan jin tare da masu sadaukarwar sa, trims, solos (PFLs), da bebe. Ta hanyar saita CL-16 zuwa yanayin EQ misali LF EQ (Hold Bank sannan Arm), kullin tsiri na sama da na tsakiya yana ba da damar sarrafa EQ kuma yana ba da ƙarin jin daɗin tashar tashar analog.

Abubuwan da aka fitar
A cikin kowane nau'i ban da Fat Channel, EQ da Bus Aika akan hanyoyin Faders, juya kullin sama don daidaita abubuwan fitarwa kuma danna kullin sama yayin riƙe Menu don kashe fitarwa.

Jigilar Jirgin Sama

TSAYA
Danna don dakatar da sake kunnawa ko yin rikodi. Maɓallin tsayawa yana haskaka rawaya lokacin tsayawa. Yayin tsayawa, danna tsayawa don nuna abin ɗauka na gaba a cikin LCD.
RUBUTU
Danna don fara rikodin sabon ɗauka. Maɓallin rikodin da Babban Bayanan Bayani suna haskaka ja yayin yin rikodi.
Lura: Komawa, Kunna da Saurin jigilar jigilar kayayyaki tsoho zuwa maɓallan mai amfani U1, U2, da U3, bi da bi.

Maɓallin Yanayin

Duba Hanyoyi/Mita Views sama don ƙarin bayani.
PAN/HPF Latsa kwanon rufi don canza ƙulli na tsakiya zuwa sarrafa kwanon rufi. Yayin riƙe Bank/ALT, latsa kwanon rufi don canza maɓallin tsakiya zuwa sarrafa HPF.
ARM/LF Latsa ka riƙe Hannu don nuna halin hannu akan ƙwanƙwasa, sannan danna ƙulli don kunna hannu/ kwance damara. Yayin riƙe Bank/ALT, latsa
Hannun hannu don canza kulli na sama da na tsakiya zuwa sarrafa LF EQ.
BANK/ALT Latsa don nunawa da sarrafa Ch 17-32.
BUS/MF Latsa don nunawa da sarrafa bas. Yayin riƙe Bank/ALT, latsa Bus don canza maɓalli na sama da na tsakiya zuwa sarrafa MF EQ.
DLY/HF Latsa don canza maɓalli na tsakiya don jinkirtawa da sarrafa jujjuyawar polarity. Yayin riƙe Bank/ALT, latsa Dly don canza kulli na sama da na tsakiya zuwa sarrafa HF EQ.

Maɓallin Metadata

• Yana gyara metadata don ɗauka na yanzu ko na gaba. Yayin yin rikodi, ana gyara metadata na abin ɗauka na yanzu. Yayin da aka tsaya, za'a iya gyara ɗaukacin rikodin ƙarshe ko na gaba na metadata. Yayin da ke cikin yanayin tasha, danna Tsaya don canzawa tsakanin gyara halin yanzu da na gaba.
• SCENE Latsa don gyara sunan wuri. Yayin yin rikodi, ana gyara yanayin abin da ake ɗauka na yanzu. Yayin da aka tsaya, za a iya gyara rikodin ɗauka na ƙarshe ko na gaba. Yayin cikin yanayin tasha, danna tsayawa don canzawa tsakanin gyara yanayin halin yanzu da na gaba.
• TAKE Latsa don gyara lambar ɗauka. A cikin rikodi, ana gyara lambar ɗauka ta yanzu. A tsayawa, za a iya gyara rikodin ɗauka na ƙarshe ko lambar ɗauka ta gaba. Yayin tsayawa, danna tsayawa don canzawa tsakanin gyara lambar ɗauka ta halin yanzu da na gaba.
• NOTE LAtsa don shirya bayanin kula. A cikin rikodi, ana gyara bayanan ɗauka na yanzu. A tsayawa, za a iya gyara rikodin ɗauka na ƙarshe ko bayanin kula na gaba. Yayin tsayawa, danna tsayawa don canzawa tsakanin gyara bayanin kula na yanzu da na gaba.

Maɓallan da aka raba mai amfani

CL-16 yana ba da maɓallan shirye-shiryen masu amfani guda biyar, U1 ta hanyar U5 don saurin samun dama ga ayyuka biyar da aka fi so. Ayyukan da aka yi taswira zuwa waɗannan maɓallan an kwatanta su a cikin filayen Maɓallin Maɓallin Mai amfani na Yankin Babban Bayani na LCD. Sanya ayyuka ga waɗannan maɓallan a cikin Masu Gudanarwa>Taswira>Yanayin Koyi. Ana iya samun ƙarin gajerun hanyoyin maɓallin maɓallin mai amfani guda biyar (na jimlar goma) ta hanyar riƙe maɓallin Bank/Alt sannan danna U1-U5. Taswirar waɗannan ta hanyar riƙe Alt sannan maɓallin U a cikin Taswira> Yanayin Koyi. Wasu maɓallai / maɓalli a gefen dama na CL-16 ana iya tsara su daga wannan menu kuma.

Komawa / Com Buttons
Danna don saka idanu akan dawowar a cikin belun kunne. Lokacin amfani da Scorpio, saka idanu Com Rtn 2 ta latsa Com Rtn yayin latsa maɓallin HP. Maballin Com Rtn yana haskaka kore lokacin saka idanu Com Rtn 2 da orange lokacin saka idanu Com Rtn 1. Danna Com 1 don kunna sadarwar Com 1. Latsa Com 2 don kunna sadarwar Com 2.

Maballin Mita
Latsa don fita yanayin kuma komawa zuwa saiti na HP na yanzu don komawa zuwa mitar gida ch 1-16 view.

Maballin Menu
Danna don shigar da menu. Riƙe Menu sannan danna datsa tukunya don kashe tashar tasha. Riƙe Menu sannan danna maɓallin keɓaɓɓiyar layi na sama don kashe fitarwa (lokacin da saitin saman layi yana nuna abubuwan fitarwa) Riƙe Menu sannan danna maɓallin tsakiyar layi a Yanayin Bus ko babban layin layi a Bus Send akan Yanayin Faders don kashe bas bas. Riƙe Menu sannan matsar da PFL zuwa hagu don samun damar menus kamar yadda aka ayyana a cikin System>Menu+PFL Switch Action menu. Yana ƙayyade lokacin da aiki na ɗan lokaci ya fara. Riƙe zaɓin zaɓi na tsawon lokaci fiye da ƙofa zai saita wannan zaɓi don yin aiki a matsayin ɗan lokaci.

Ƙayyadaddun bayanai

Bayanai na iya canzawa ba tare da sanarwa ba. Don sabon bayanin da ake samu akan duk samfuran na'urorin Sound, ziyarci namu website: www.sounddevices.com.

• VOLTAGE
  10-18 V DC a XLR-4. Fin 4 = +, fil 1 = ƙasa.
• JANO NA YANZU (MIN)
  560mA quiescent a 12V DC a ciki, duk tashoshin USB sun bar buɗe
• ZAN YANZU (Tsakiya)
  2.93 A, tashoshin USB jimlar nauyin 5A
• JANO NA YANZU (MAX)
  5.51 A, tashoshin USB jimlar nauyin 10A
• USB-A PORTS
  5V, 1.5 A kowane
• USB-C PORTS
  5V, 3 A kowane
• TARBIYYA MAI NASARA, WUTA
  5V, 1 A akwai akan fil 10
• TARBIYYA MAI NASARA, INPUT
  60 k ohm na al'ada shigarwar Z. Vih = 3.5 V min, Vil = 1.5 V max
• PORTS NAN NAN, FITARWA
  100 ohm fitarwa Z lokacin da aka saita azaman fitarwa
• CANZA KAFA
  1 k ohm na al'ada shigarwar Z. Haɗa zuwa ƙasa don aiki (ƙananan aiki).
• NUNA:
  • 4.71 kg
  • (10 lbs 6 oz)
• GIRKI: (HXWXD)
  • ALAMOMIN NINKE KASA
    • 8.01 cm X 43.52 cm x 32.913 cm
    • (3.15 in. X 17.13 a. X 12.96 a.)
  • ALAMOMIN NINYE
    • 14.64 cm X 43.52 cm x 35.90 cm
    • (5.76 in. X 17.13 a. X 14.13 a.)

Hidimar Faders

CL-16 yana da fa'idar Penny & Giles masu amfani da filin. Ana iya canza faders da sauri tare da ƙaramin ƙoƙari.
MAGANIN MUSA:
Penny & Giles 104 mm Linear Manual Fader PGF3210

DON CIRE MAI FADAR:

• Mataki na 1 Cire kullin fader ta jawo ku a hankali
• MATAKI 2 Cire screws waɗanda ke riƙe da fader a wurin. Daya a sama
• MATAKI 3 Juya naúrar don samun dama ga tashar fader. Cire kullun biyu kuma cire murfin
• Mataki na 4 Cire haɗin haɗin wutar lantarki ta hanyar ja a hankali.
• Mataki na 5 Cire fader.
  • DOMIN SHIGA SABON FADER JUYA MATAKAN DA SUKA GABATA:
• Mataki na 6 Saka sabon fader mai maye gurbin. Sauya da Penny & Giles 104 mm Litattafan Manual Fader PGF3210.
• Mataki na 7 Sake haɗa haɗin wutar lantarki mai fader.
• MATAKI 8 Maye gurbin faifan baya da kusorun samun damar baya.
• MATAKI 9 Sauya sukunukan fader guda biyu.
• MATAKI 10 Maye gurbin ƙwanƙolin fader

Takardu / Albarkatu

NA'urorin Sauti CL-16 Fader Control Fader Linear Linear [pdf] Jagorar mai amfani CL-16, Fader Control Surface Linear Fader, CL-16 Fader Control Surface

Magana

• Manual mai amfani