Ngwaọrụ ụda CL-16 Linear Fader Control Surface User Guide

CL-16 Linear Fader Control Surface maka 8-Series na-ejikọta ịdị mfe nke consoles analog ọdịnala na ike na mgbanwe nke consoles dijitalụ. Elu njikwa a na-ekwu okwu na-eme ka ahụmịhe nke ịgwakọta ụgbọ ibu na arụ ọrụ ya nwere ọgụgụ isi, ndị na-eme ihe na-adịghị mma 16, trims 16 raara onwe ya nye, yana LCD panoramic dị ebube. Emebere ihe ndị a niile nke ọma ka ọ bụrụ kọmpat 16.3 ”-obosara nke dabara na ụgbọ ala ma na-arụ ọrụ site na 12 V DC.

Dakọtara na 833, 888 na Scorpio

Njikwa mkpụbelata rotary 16 raara onwe ya nye
16 raara onwe ya nye fader

Nkà ihe ọmụma imewe nke nwere ọgụgụ isi ebe ọwa 1-16 raara onwe ya nye, njikwa na-abụghị ụlọ akụ dị ka ihe njikwa analog ọdịnala, yana atụmatụ ndị ọzọ dị mkpa nwere ike ịnweta ngwa ngwa.
32 njikwa rotary multi-function maka EQ, pan, ọwa 17-32 uru, uru ụgbọ ala, uru mmepụta, na ndị ọzọ.

Ihuenyo LCD buru ibu, nke anwụ na-agụ na-agbadata maka nchekwa na njem dị mfe ma dị nchebe
Ntụkwasị obi ọhụrụ dị elu, ịgbachi nkịtị, bọtịnụ mmetụ dị nro maka ọrụ isi dị ka ndekọ, nkwụsị, metadata, coms, nloghachi, na ndị ọzọ.

Bọtịnụ ise nwere ike kenye onye ọrụ
Igwe USB ọdụ ụgbọ mmiri 5 wuru na (USB-C abụọ na USB-A atọ) maka ahụigodo, mbadamba SD-Remote, na akụkụ USB ndị ọzọ.

1/4" na 1/8" jacks ekweisi
Njikọ 10-Pin dịpụrụ adịpụ maka wiring omenala nke LEDs na switches, yana ntinye pedal 1/4"

Jikọọ site na USB-B
12V DC kwadoro site na 4-pin XLR (anaghị etinye ya)

16 ultra-smooth gliding Penny & Giles 100 mm linear fader - mmetụta kachasị mma na ahịa
Ngwa ngwa ala panel ịnweta maka ọrụ ubi nke faders

Ogwe Views

N'elu

PENNY & GILES FADERS
Na-edozi ọkwa fader maka ọwa 1-16. -Inf ruo +16 dB fader nso. A na-egosipụta uru Fader na LCD.

PFL/SEL TOGGLE Mgbanwe
N'ịga n'aka ekpe, PFL na-enye ọwa ahọpụtara ma ọ bụ naanị ụgbọ ala mgbe ọ nọ na ọnọdụ ụgbọ ala. Ịkwaga ihe ntụgharị gaa n'aka nri na-ahọrọ ọnọdụ nhazi ọwa (aka FAT channel) ma ọ bụ họrọ ụgbọ ala na-eziga na ọnọdụ faders mgbe ọ nọ na Bus Mode.
Kpachie ite n'ite W/RING LEDS
Tụgharịa ka ịhazie uru mkpụbelata maka ọwa 1-16. A na-egosipụta uru mkpụbelata na LCD. Pịa ka ị na-ejide NchNhr ka ogbi/mechie ọwa 1-16. Igwe ọkụ mgbanaka gbara ya gburugburu na-enye ihe ngosi ngosi ọkwa ọkwa ọwa, PFL, ogbi, na ọkwa ogwe aka.
- Mgbanwe ike akwụkwọ ndụ akwụkwọ ndụ, odo/oroma, na ọbara ọbara maka ọkwa mgbaama, ọrụ njedebe tupu/post fade na mbelata n'otu n'otu.
- odo na-egbuke egbuke = ọwa PFL'd.
- Acha anụnụ anụnụ = ọwa kwụsịrị
- Uhie = ọwa njikere.

AHỤRỤ ỌTỤRỤ ỌTỤRỤ ỌTỤTỤ KWESỊRỊ W/RING LEDS
Rotary/pịa igodo nwere ọtụtụ ọrụ dabere na ọnọdụ ahọpụtara. A na-egosipụta ụkpụrụ na ọkwa n'ahịrị nke abụọ nke LCD. Tụgharịa ma ọ bụ pịa ka ịhazie ma ọ bụ gbanwee paramita dị iche iche. Igwe ọkụ ọkụ gbara ya gburugburu na-egosipụta ozi ọkwa dị iche iche
Ahịrị elu elu ọtụtụ arụrụ ọrụ W/RING LEDS.
Rotary/pịa igodo nwere ọtụtụ ike dabere na ọnọdụ ahọpụtara. A na-egosipụta ụkpụrụ na ọkwa n'ahịrị elu nke LCD. Tụgharịa ma ọ bụ pịa ka ịhazie ma ọ bụ gbanwee paramita dị iche iche. Igwe ọkụ ọkụ gbara ya gburugburu na-egosipụta ozi ọkwa dị iche iche

Kwụsị bọtịnụ
Kwụsị ịdekọ ma ọ bụ ịkpọghachi. Pịa Kwụsị ka kwụsịtụrụ na-agbanwe ka igosipụta aha ewee ọzọ na LCD ka ejiri bọtịnụ Scene, Take, Notes dezie.
bọtịnụ ndekọ
Na-amalite ndekọ ọhụrụ. Na-enye ọkụ na-acha uhie uhie mgbe ị na-edekọ.

bọtịnụ Ụdị
Na-ahọrọ ụdịdị dị iche iche iji chọpụta ihe mita na ozi ndị ọzọ egosipụtara na LCD yana ọrụ nke eriri ọtụtụ ọrụ dị elu na etiti yana PFL/Sel toggle switches.
BỤTA METADATA
Bọtịnụ ụzọ mkpirisi maka ndezi ngwa ngwa nke metadata. Dezie Scene, Were na ndetu maka ihe dị ugbu a ma ọ bụ na-esote. Melite aha ihe nkiri, gbaa okirikiri ma ọ bụ hichapụ ndekọ ikpeazụ (ewere ụgha).

Bọtịnụ ONYE IKE IKE
Onye ọrụ-mapable na ọrụ dị iche iche maka ịnweta ngwa ngwa Ọrụ eserese na-egosipụta n'elu na LCD
KWESỊRỊghachi
Bọtịnụ ndị raara onwe ha nye maka nyochaa nloghachi dị iche iche na ekweisi
COM zipu bọtịnụ
Pịa ka ikwu okwu. Na-ebugharị igweokwu slate ahọpụtara gaa na ebe ahazibere na menus Send Routing.
bọtịnụ mita
Pịa ka ịlaghachi na LCD ụlọ ndabara view na HP preset ugbu a. Na-emegharịkwa ọrụ nke bọtịnụ Mita na 8-Series n'ihu panel.
NKWUKWU MENU
Na-emegharia ọrụ ekenyere nke bọtịnụ NchNhr dị na 8-Series n'ihu panel. Jide wee pịa mkpụbelata ọwa ọwa ka o mechie ọwa ahụ. A na-ejikwa ya mebie bọs na mpụta n'ụdị dabara adaba
Mgbanwe Mgbanwe
Na-emegharị ọrụ ndị e kenyere nke mgbanwe ntụgharị atọ n'okpuru LCD ihu panel 8-Series.
Igwe ekwe ntị
Na-emegharị ọrụ nke isi ekweisi na 8-Series front panel LCD. Na Scorpio, jide ka ị na-pịa bọtịnụ Com Rtn ka ịgbanwuo / gbanyụọ nlekota nke Com Rtn 2 na ekweisi. Pịa mgbe naanị otu ọwa ma ọ bụ ụgbọ ala ka ọ gbanwee gaa na ntọala ekweisi ugbu a. Jide n'oge a na-akpọghachi ka ịbanye ọnọdụ nchacha ọdịyo.
Họrọ KNOB
Na-emegharị ọrụ nke Họrọ knob na 8-Series n'ihu panel LCD.
LCD Mpịakọta-ala n'Ụwa-AKỤKWUO
Ngosipụta agba na-egbuke egbuke nke mita, parampat, ụdịdị, ụgbọ njem, koodu oge, metadata na ndị ọzọ. Edobere ihie LCD na NchNhr>Nchịkwa>CL-16>LCD ihie menu.

N'okpuru

Azụ

N'ihu

Ngosipụta LCD

Nkọwa nke ahịrị eriri elu
Na-akọwa ọrụ nke ọtụtụ ọrụ njikwa njikwa ahịrị elu. Ọrụ na-agbanwe dabere na ọnọdụ ahọpụtara.
Nkọwa nke ahịrị etiti etiti
Na-akọwa ọrụ nke igodo njikwa ahịrị etiti na-arụ ọtụtụ ọrụ. Ọrụ na-agbanwe dabere na ọnọdụ ahọpụtara.
OGE etiti
Na-egosiputa data bara uru maka ọwa ma ọ bụ ụgbọ ala ọ bụla dabere na paramita a na-edozi site na iji knobs etiti dị ka Pan, Delay, HPF, EQ, Ch 17-32, Urite ụgbọ ala, njem ụgbọ ala, ụgbọ ala na-eziga, FAT Channel Parameters na ndị ọzọ.
OGE AHỤRỤ ELU
Na-egosiputa data bara uru maka ọwa, ụgbọ ala, ma ọ bụ mmepụta dabere na nke a na-edozi paramita dị elu site na iji knobs dị elu dị ka Mmepụta Mmepụta, HPF, EQ, Bus Gain, Bus Routing, Bus Sends, FAT Channel Parameters na ndị ọzọ.

Mpaghara ozi
Na-egosiputa ozi dị iche iche gụnyere nleta LR, ọnụ ọgụgụ oge, metadata na ndị ọzọ. Agba n'okirikiri na-agbanwe dabere na ọnọdụ ụgbọ njem dịka ndị a:
• ndabere uhie = ndekọ
• ndabere ojii = kwụsịrị
• Okirikiri ndụ ndụ = igwu egwu
• Okirikiri akwụkwọ ndụ akwụkwọ ndụ na-egbuke egbuke = kwụsịtụrụ ịkpọghachi
• ndabere na-acha anụnụ anụnụ = FFWD ma ọ bụ REW
MAIN LR mix mita
Na-egosiputa mita mix ụgbọ ala LR isi yana ọkwa ogwe aka ndekọ ha.
Were aha
Gosipụta ma dezie Aha Were ugbu a. Pịa Kwụsị ka a kwụsịrị iji gosipụta aha ị ga-eso.

AHA SEENE
Gosipụta ma dezie aha Ihe ngosi dị ugbu a. Pịa Kwụsị ka kwụsịtụrụ ka igosi aha ngosi na-esote.
Were nọmba
Gosipụta ma dezie nọmba Were ugbu a. Pịa Kwụsị ka kwụsịtụrụ ka igosi nọmba Were na-esote.
NKWUO
Gosipụta ma dezie nọmba ndetu Take ugbu a. Pịa Kwụsị ka kwụsịtụrụ iji gosipụta ndetu Take na-esote.

BỤTA ONYE JI 1-5 Nkọwa
Na-egosiputa aha ụzọ mkpirisi nke etinyere na bọtịnụ U1 – U5.
TIMECODE COUNTER
Na-egosiputa koodu oge dị ugbu a n'oge ndekọ na nkwụsị yana koodu ọkpụkpọ n'oge egwu.
Mkpokọta na oge fọdụrụnụ
Na-egosiputa oge gafeworo n'oge ndekọ na ịkpọghachi. N'oge ọkpụkpọ, a ga-egosipụta oge fọdụrụnụ mgbe '/' gachara.

Ọnụọgụgụ FRAME
Na-egosiputa ọnụego etiti koodu oge dị ugbu a.
HP PRESET
Na-egosiputa isi iyi HP nke ahọpụtara ugbu a yana olu HP mgbe ejiri mkpisi HP gbanwee ya.
SYNC/SAMPLelee ọnụego
Na-egosiputa isi mmalite mmekọrịta yana sampọnụego.

MMETA laghachi
Na-egosiputa mita maka ọwa abụọ nke mgbama nloghachi ọ bụla.
ỌGBỤ AHA HANNE ma ọ bụ ụgbọ ala
Na-egosiputa aha ọwa, mezie, na uru fader mgbe viewmita chanel. Na-egosiputa nọmba ụgbọ ala na uru ụgbọ ala mgbe viewmita ụgbọ ala. Ogige ndị a na-agbanwe agba ha dịka ndị a:
- Oji ndabere/ederede isi awọ = gbanyụọ ọwa
  ma ọ bụ enweghị isi ahọpụtara.
- Okirikiri isi awọ/ederede ọcha = ọwa/ụgbọ ala gbanyere ma tụpụ ya.
- Okirikiri uhie/ederede ọcha = ọwa/bọs gbanyere na ngwa ọgụ.
- Okirikiri na-acha anụnụ anụnụ/ederede ọcha = ọwa/bọs kwụsịrị.

Ọwa ejikọrọ
Ejikọtara mpaghara ozi ọwa mgbe ejikọrọ ọwa.
chanel ma ọ bụ ụgbọ ala
Na-egosiputa ọwa ma ọ bụ nde ụgbọ ala dabere na ọnọdụ ahọpụtara.
Agba CH. Ngosipụta otu
A na-ejikọta ọwa ndị nwere otu ihe ngosi agba. Họrọ agba nke na-emetụta otu na CL-16> Otu agba menu.

METER VIEW AHA
- Na-egosiputa '1-16' mgbe viewing Channel 1-16 mita
- Na-egosiputa '17-32' mgbe viewing Channel 17-32 mita
- Na-egosiputa aha ọwa mgbe viewna ọwa FAT
- Na-egosiputa 'Buses' mgbe viewmita ụgbọ ala
- Na-egosiputa Mba ụgbọ ala mgbe viewna ụgbọ ala na-eziga-na-faders mode

Mpaghara ozi ụgbọala/ike
- Na-egosiputa SSD, SD1, na SD2 oge ndekọ fọdụrụnụ.
- Na-egosiputa 8-Series na CL-16 ike isi iyi ike na voltage.

Ijikọ na igwekọ ihe-usoro 8 gị

Iji eriri USB-A ewepụtara na eriri USB-B, jikọọ ọdụ ụgbọ mmiri USB-A nke 8-Series na ọdụ ụgbọ mmiri CL-16 USB-B.
Jikọọ 8-Series' 1/4" TRS ekweisi out jack na CL-16's 1/4" TRS "To 8-Series headphone Out" n'iji eriri ewepụtara.

Jikọọ isi iyi ike 10-18 V DC site na iji 4-pin XLR (F) na ntinye DC nke CL-16. Agụnyeghị isi iyi ike.
Ike na 8-Series Mixer-Recorder. Rụtụ aka na ntuziaka onye ọrụ usoro 8 dabara adaba maka ntuziaka ọrụ yana nkọwa niile.

Ịgbanyụ/ Gbanyụọ

Ike na 8-Series Mixer-Recorder. Ozugbo 8-Series agbagoro, ọ ga-amalite ozugbo CL-16.

Ka ịgbanyụọ, naanị tụgharịa mgba ọkụ ọkụ 8-Series ka ọ bụrụ ọnọdụ gbanyụọ. CL-16 ga-agbadakwa

Ịwepụ CL-16 na 8-Series

Enwere ike ịgbanye CL-16 na / wepụ ya na 8-Series ka agbanyere ya na-enweghị mmebi nke otu ọ bụla. Mgbe CL-16 na-ewepụghị, "Control Surface Unplugged" na-egosipụta na 8-Series LCD. Ọ dịghị ọkwa ga-agbanwe. N'oge a: Na-atụ anya mgbanwe ọkwa mberede ma ọ bụrụ na emeghị ka njikwa> Soft Fader / trim pickup dị ka trims na fader ga-ekpebi ọkwa ọdịyo ugbu a site na trims na fader na 8-Series

Na-emelite CL-16 Firmware

Mgbe ọ dị mkpa, a na-emelite firmware CL-16 na-akpaghị aka mgbe ị na-emelite ngwa ngwa 8-Series. Mmelite firmware 8-Series PRG file nwere data mmelite maka ma 8-Series na CL-16. Jikọọ CL-16 na 8-Series wee hụ na ha abụọ jikọtara na isi mmalite ike a pụrụ ịdabere na ya. Melite firmware 8-Series site na iji usoro nkịtị. Ọ bụrụ na enwere mmelite firmware CL-16 dị, ọ ga-amalite na-akpaghị aka mgbe 8-Series mechara usoro mmelite ya. Bọtịnụ nkwụsị CL-16 ga-egbuke egbuke edo edo ka CL-16 na-emelite. Ozugbo mmelite CL-16 mechara, 8-Series/CL-16 combo ga-agbanye ma dịrị njikere maka ojiji.

Ofefe arụmọrụview

CL-16 na-ejikọta paradaịs nke eriri igwe mixer ọdịnala yana ikike ọtụtụ ọrụ nke igwe igwe dijitalụ ọgbara ọhụrụ. Ozugbo ịmara njikwa dị iche iche, ụdịdị dị iche iche na mita ha jikọtara ya views, nnukwu ikike nke igwekota/ihe ndekọ 8-Series gị ga-apụta ìhè. Enwere ike ịchịkwa ọrụ 8-Series niile (ọwa, bọs, mpụta, menus metadata, coms) site na CL-16. Ọ bụ ezie na a na-egosipụta ọtụtụ ozi na CL-16 LCD, 8-Series LCD ka na-enye ozi bara uru mgbe ị na-arụ ọrụ ụfọdụ dịka ntụgharị, ntinye ederede.

Mwepu ọwa
Njikwa ọwa nke dị n'elu na mita LCD ha, aha na ụkpụrụ ha na-adakọbara n'ụdị 'oghere' kwụ ọtọ nke mere na anya nwere ike ịkwaga n'ụzọ nkịtị n'etiti njikwa ọwa na ngosi.
CHANNEL TRIMS 1-16
A na-arara ite mpekere iri na isii ahụ maka ịhazigharị uru mkpụbelata maka ọwa 16-1. Uru mkpụbelata adịghị maka ọwa 16-17. Tụgharịa obere ite iji dozie uru ya wee gosipụta uru uru ya na dB n'ahịrị ala nke LCD. Kpachapụta mgbanaka ite mgbanaka LEDs gosipụtara ọkwa ọkwa ọwa (acha akwụkwọ ndụ ike dị iche iche), mmachi ọwa tupu/post fade (edo edo/oroma), na clipping (acha ọbara ọbara).
CHANNEL TRIMS 17-32
Pịa Bank ka ịgbanwee gaa na Ch 17-32 wee tụgharịa otu mkpịsị ugodi elu iji dozie uru mkpụbelata ya wee gosipụta uru uru ya na dB na ala na ahịrị elu nke LCD.

CHANNEL MUTES 1-16
Pịa ite mkpụbelata ka ị na-ejide NchNhr ka ogbi / mebie ọwa 1-16. Mgbe emechiri emechi, mgbanaka mgbanaka ite mkpụbelata ikanam na-atụgharị na-acha anụnụ anụnụ.
CHANNEL MUTES 17-32
Pịa Bank ka ịgbanwee gaa na Ch 17-32 wee pịa igodo etiti ka ị na-ejide NchNhr ka ogbi / mebie ọwa 17-32. Mgbe emechiri, mgbanaka mgbanaka etiti etiti na-atụgharị na-acha anụnụ anụnụ.
Ndị na-agba ọsọ chanel 1-16
Ndị 16 Penny na Giles linear fader na-arara onwe ha nye ịhazigharị uru fader maka ọwa 1-16. Gbanye fader iji mezie uru ya wee gosipụta uru uru ya na dB n'ahịrị ala nke LCD

Ndị na-agba ọsọ chanel 17-32
Iji jikọta ọwa 17-32, pịa Bank ka ịgbanwee gaa na Ch 17-32 wee tụgharịa mkpịsị etiti etiti ka ịhazie uru fader ya wee gosipụta uru uru ya na dB na ala na etiti etiti LCD.
CHANNEL PFLS 1-16
Mgbe egosiri mita Ch 1-16, bugharịa ntụgharị aka ekpe gaa na ọwa PFL 1-16. Mgbe ọwa 1-16 bụ PFL'd, ọ na-ejikọta ya na mgbanaka ite ite LED blinks odo na PFL 'n' blinks n'ọhịa ekweisi na mpaghara Ozi Isi. Bugharịa ntụgharị aka ekpe ọzọ ma ọ bụ pịa Mita ka ịkagbu PFL wee laghachi na preset HP dị ugbu a.
CHANNEL PFLS 17-32
Mgbe egosiri mita Ch 17-32 (site na ịpị ụlọ akụ), bugharịa ntụgharị aka ekpe gaa na ọwa PFL 17-32. Mgbe ọwa 17-32 bụ PFL, ọ na-ejikọta ya na mgbanaka etiti etiti LED blinks odo na PFL 'n' n'ọhịa ekweisi na mpaghara Ozi Isi. Bugharịa ntụgharị aka ekpe ọzọ ma ọ bụ pịa Mita ka ịkagbu PFL wee laghachi na preset HP dị ugbu a.

Ụdị/mita Views

CL-16 nwere ụdị ọrụ dị iche iche (e depụtara n'okpuru). Ịgbanwe ọnọdụ amn na-agbanwe ọrụ nke mkpisi arụ ọrụ ọtụtụ na n'ọnọdụ ụfọdụ, na-agbanye LCD Meter View. A na-egosipụta ọrụ na/ma ọ bụ uru nke knobs ọtụtụ ọrụ na mpaghara LCD nke dị n'elu na nke etiti na n'akụkụ akụkụ aka ekpe elu nke nkọwa.

CH 1-16 (METỤTA ỤLỌ EZIOKWU VIEW)
Pịa bọtịnụ mita ka ịlaghachi na mita ụlọ a na-adịghị mma mgbe niile view. Tụgharịa mkpịsị ugodi n'elu iji dozie uru mmepụta; pịa ma jide NchNhr wee pịa mgbanaka elu ka o mechie mmepụta kwekọrọ.
CH 17-32 (BANK)
Pịa bọtịnụ Bank. Bọtịnụ ụlọ akụ na-egbuke egbuke akwụkwọ ndụ akwụkwọ ndụ na mita view na-agbanwe na ndabere akwụkwọ ndụ akwụkwọ ndụ. Tụgharịa nkuku etiti ka mezie uru fader Ch 17-32; pịa ka ị na-ejide NchNhr ka ogbi. Tụgharịa mkpịsị ugodi elu ka mezie uru mkpụbelata Ch 17-32. Enwere ike gbanyụọ ụlọ akụ na Ch17-32 site na ịgagharị na Controllers>CL-16>Bank Gbanyụọ.
PAN CH 1-16
Pịa bọtịnụ Pan mgbe viewing Ch 1-16. Pan bọtịnụ na-enye ìhè pink. Tụgharịa nkuku etiti ka mezie ch 1-16 pan; pịa mkpịsị aka na pan etiti. Ogwe osisi na-acha anụnụ anụnụ na-egosipụta ọnọdụ pan. Tụgharịa mkpịsị ugodi n'elu iji dozie uru mmepụta; pịa ka ị na-ejide menu ka mebie mpụta.
PAN CH 17-32
Pịa bọtịnụ Pan mgbe viewing Ch 17-32. Pan bọtịnụ na-enye ìhè pink. Tụgharịa nkuku etiti ka mezie ch 17-32 pan; pịa mkpịsị aka na pan etiti. Ogwe osisi na-acha anụnụ anụnụ na-egosipụta ọnọdụ pan. Tụgharịa mkpịsị ugodi n'elu iji dozie uru mmepụta; ka ị na-ejide menu ka mebie mpụta.
OGWU/ỊKWU NDỊ MMADỤ CH 1-16
Pịa bọtịnụ Dly. Bọtịnụ dly na-enye ìhè na-acha anụnụ anụnụ. Tụgharịa mkpịsị ugodi n'etiti iji dozie oge ch 1-16; pịa mkpịsị ugodi iji tụgharịa polarity. Tụgharịa mkpịsị ugodi n'elu iji dozie uru mmepụta; pịa ka ị na-ejide menu ka mebie mpụta.
ARM
Pịa ma jide bọtịnụ ogwe aka (enwere ike ịgbanye ogwe aka mgbe ijide bọtịnụ ogwe aka). Na-egosiputa ọkwa ogwe aka 1-16 na mgbanaka ite ite na ọwa 17-32 ọkwa ogwe aka na LEDs mgbanaka etiti. Uhie ji ngwa ọgụ. Pịa mkpịsị ugodi ka ị gbanwee ogwe aka/ịkwapu. N'ụdị ụgbọ ala (pịa ụgbọ ala), ịpị na ijide ogwe aka ụgbọ ala na-egosiputa ogwe aka ụgbọ ala (Bus 1, Bus 2, Bus L, Bus R) na LEDs mgbanaka etiti. N'ime ụgbọ ala na-eziga na ọnọdụ Faders, ịpị na ijide ogwe aka na-egosiputa ogwe aka niile: - Ch 1-16 ogwe aka na mgbanaka ite mgbanaka LEDs, ogwe aka Ch 17-32 na LEDs mgbanaka etiti, yana ogwe ụgbọ ala na mgbanaka mgbanaka elu.
Agba chanel
Enwere ike iji ụcha ọwa iji nyere aka chọpụta na ịmata ọdịiche dị n'etiti isi mmalite ọwa. Maka ọwa ọ bụla 1-32, họrọ agba site na njikwa>-CL-16>Chanel Agba menu. A na-etinye ụcha ahọpụtara n'okirikiri ọwa ahụ wee mebie agba agba agba agba agba maka ch 1-16 na akwụkwọ ndụ akwụkwọ ndụ maka ch 17-32. Mara: Agbanyeghị agba ọwa na ụgbọ ala na-eziga na Faders view.
Ụgbọ ala
Pịa ka igosi ụgbọ ala 1-10, L, R mita na ihuenyo CL-16 LCD na Bus Routing na bọtịnụ ụgbọ ala LCD nke 8 na-enye ìhè pink. Tụgharịa mkpịsị ugodi n'etiti iji mezie uru ụgbọ ala L, R, B1 – B10; bugharịa ntugharị aka ekpe gaa na naanị ụgbọ ala; pịa ka ị na-ejide NchNhr ka ogbi. Tụgharịa mkpịsị ugodi n'elu iji dozie uru mmepụta; pịa ka ị na-ejide NchNhr ka mebie mpụta.
Ụgbọ ala na-eziga na FADERS CH 1-16
Pịa bọtịnụ Bus + Sel toggle. Ụgbọ ala ahụ bụ naanị ya, a na-egosipụtakwa ihuenyo ngagharị ya na LCD usoro 8. Bọtịnụ bọs na-egbuke egbuke pink na mita view na-agbanwe na okirikiri acha anụnụ anụnụ. Pịa igodo etiti ka ị ga-aga Ch 1-16 gaa na bọs prefade (green), postfade (oroma) ma ọ bụ site na izipu uru (acha anụnụ anụnụ). Mgbe atọrọ izipu uru, tụgharịa igodo etiti ka ịhazie uru izipu. Pịa bọtịnụ ụlọ akụ ka ịnweta izipu maka ch 17- 32. Tụgharịa mkpịsị aka elu ka ịhazie uru ụgbọ ala nna ukwu; pịa bọtịnụ elu ka ogbi ụgbọ ala.
Ụgbọ ala na-eziga na FADERS CH 17-32
Pịa bọtịnụ Bus + Pịa mgbe viewing Ch 17-32. Ụgbọ ala ahụ bụ naanị ya, a na-egosipụtakwa ihuenyo ngagharị ya na LCD usoro 8. Bọtịnụ bọs na-egbuke egbuke pink na mita view na-agbanwe na okirikiri acha anụnụ anụnụ. Pịa igodo etiti ka ị ga-aga Ch 17-32 gaa na bọs prefade (green), postfade (oroma) ma ọ bụ site na izipu uru (acha anụnụ anụnụ). Mgbe atọrọ izipu uru, tụgharịa igodo etiti ka ịhazie uru izipu. Pịa bọtịnụ Bank iji nweta izipu
Ch 1-16. HPF CH 1-16
Pịa ma jide Bank bọtịnụ wee pịa bọtịnụ Pan. Tụgharịa mkpịsị aka elu ka ịhazigharị ugboro ugboro HPF. Pịa igodo etiti ka ịgafe HPF.
EQ LF CH 1-16
Pịa ma jide bọtịnụ Bank wee pịa bọtịnụ ogwe aka. Tụgharịa nkuku elu ka mezie LF freq/Q. Pịa igodo elu ka ị gbanwee n'etiti LF freq/Q. Tụgharịa mkpịsị ugodi etiti ka mezie uru LF. Pịa igodo etiti ka ị gafere LF. Jiri igwe okwu ka ịgbanwee eriri LF n'etiti Gbanyụọ/Mbupu/Biputere. Jiri ntụgharị Fav ka ọ gbanwee band LF n'etiti Peak na Shelf. Mgbe ị na-edozi knobs nke elu ma ọ bụ etiti nke ọwa, a na-egosipụta akụkụ EQ ya na LCD usoro 8.
EQ MF CH 1-16
Pịa ma jide bọtịnụ ụlọ akụ wee bọtịnụ ụgbọ ala. Tụgharịa mkpisi aka elu ka mezie MF freq/Q. Pịa aka n'elu ka ị gbanwee n'etiti MF freq/Q. Tụgharịa mkpịsị aka etiti ka mezie uru MF. Pịa igodo etiti ka ị gafere MF. Jiri igwe okwu ka ịgbanwee eriri MF
n'etiti Gbanyụọ/Mbupu/Biputere. Mgbe ị na-edozi knobs nke elu ma ọ bụ etiti nke ọwa, a na-egosipụta akụkụ EQ ya na LCD usoro 8. EQ HF CH 1-16 Pịa ma jide bọtịnụ ụlọ akụ wee pịa Dly. Tụgharịa mkpịsị aka elu ka mezie HF freq/Q. Pịa aka n'elu ka ị gbanwee n'etiti HF freq/Q. Tụgharịa igodo etiti ka ịhazie uru HF. Pịa igodo etiti ka ị gafere HF. Jiri igwe okwu ka ịgbanwee eriri HF n'etiti Gbanyụọ/Mbupu/Biputere. Jiri ntụgharị Fav ka ọ gbanwee band HF n'etiti ọnụ ọnụ elu na shelf. Mgbe ị na-edozi knobs nke elu ma ọ bụ etiti nke ọwa, a na-egosipụta akụkụ EQ ya na LCD usoro 8.
CH 1-16 Ọwa abụba
Setụgharị. Tụgharịa na/ma ọ bụ pịa nkuku elu na etiti ka ịhazie paramita ọwa dị iche iche.
CH 17-32 Ọwa abụba
Bọtịnụ ụlọ akụ + Sel toggle. Tụgharịa na/ma ọ bụ pịa nkuku elu na etiti ka ịhazie paramita ọwa dị iche iche.

CHANNEL ahọpụtara 1-32 (Ọwa abụba)

Ọwa abụba bụ okwu a na-ejikarị na consoles dijitalụ kọwaa ọnọdụ ngosi maka ịtọ ntọala maka ọwa ahọpụtara. Ọ bụ nhata ihuenyo ọwa na 8-Series. Mgbe egosiri mita Ch 1-16, gaa n'otu aka nri gaa na 'Sel' ka ịhọrọ ọwa abụba maka Ch 1-16. Mgbe egosiri mita Ch 17-32, kpagharịa ngbanwe gaa na 'Sel' ka ịhọrọ ọwa abụba maka Ch 17-32. Ka ịpụ na ọwa Fat, pịa Mita ma ọ bụ bugharịa ọwa ahụ ọzọ ozugbo. Mgbe ahọpụtara ọwa abụba:

Mita ọwa ahọpụtara na-agbanwe gaa n'okirikiri ọcha.
A na-egosipụta mita ọwa ahọpụtara yana nọmba na aha ọwa ahụ n'akụkụ aka ekpe na mpaghara Ama mbanye/Power

Ọwa ahọpụtara bụ PFL'd. Ihe mgbanaka ite ite ejikọtara ya na-acha odo odo na PFL 'n' na-enwu n'ọhịa ekweisi na mpaghara Ozi Isi. Pịa mkpịsị aka HP ka ị gbanwee n'etiti PFL ọwa na preset HP dị ugbu a. Nke a na-enye gị ohere inyocha ngwakọta ọbụlagodi mgbe ị na-edozi paramita maka ọwa.
Mkpọma ahịrị elu na etiti na-atụgharị gaa na njikwa parameter nke ọwa ahọpụtara nke akọwara ọrụ ya na mpaghara elu na etiti dị ka ndị a:

Ahịrị etiti (Site n'aka ekpe ruo aka nri):

Aha Ch: Pịa bọtịnụ ka iwelite ahụigodo mebere aha ọwa dezie aha na ngosi 8-usoro. Jiri ahụigodo USB ma ọ bụ Họrọ Knob, HP knob, and Toggle switches nso n'akụkụ aka nri ala nke CL-16 iji dezie aha ọwa (egwu).
Isi Iyi Ch: Pịa knob ka iwelite ihuenyo Iyi nke ọwa na ngosipụta 8-Series. Mgbe ahụ tụgharịa Họrọ knob ka ọ pụta ìhè isi iyi, wee pịa ka ịhọrọ ya.
Dly/Polarity (Ch 1-16 naanị): Pịa knob iji tụgharịa polarity – akara ngosi ubi na-agbanwe na-acha akwụkwọ ndụ akwụkwọ ndụ mgbe atụgharịrị. Tụgharịa igodo iji dozie igbu oge ọwa ntinye.

Oke: Pịa bọtịnụ ka ịgbanwuo ma ọ bụ gbanyụọ ihe mgbochi
HPF (Ch 1-16 naanị): Pịa igodo iji gbanye ma gbanyụọ HPF. Tụgharịa mkpịsị ugodi iji mezie ugboro mpịakọta HPF 3dB. Mgbe agbanyere, oghere na mgbanaka etiti etiti LED ga-egosipụta ìhè anụnụ anụnụ
LF Gain, LF Freq, LF Q, Ụdị LF (Ch 1-16 naanị): Gbanwee knobs iji mezie ụkpụrụ LF band EQ. Pịa nke ọ bụla n'ime 4 knobs ka uzo/wepu ụzọ LF band. Mgbe agabigaghị ya, ogige na mgbanaka etiti etiti LEDs na-egosipụta oroma.

MF Gain, MF Freq, MF Q (Ch 1-16 naanị): Gbanwee knobs iji mezie ụkpụrụ EQ band MF. Pịa nke ọ bụla n'ime 3 knobs ka ịgafe/wepu eriri MF. Mgbe a na-agafeghị ya, mpaghara ahụ na mgbanaka etiti mgbanaka LEDs na-egosipụta edo edo.
HF Gain, HF Freq, HF Q, Ụdị HF (Ch 1-16 naanị): Gbanwee knobs iji mezie ụkpụrụ HF band EQ. Pịa nke ọ bụla n'ime 4 knobs ka uzo/wepu ụzọ HF band. Mgbe a na-agafeghị ya, mpaghara ahụ na mgbanaka etiti mgbanaka LEDs na-egosipụta akwụkwọ ndụ akwụkwọ ndụ

Ahịrị elu (Site n'aka ekpe gaa n'aka nri):

B1 – B10 Zipụ: Pịa bọtịnụ ka ịgbanwee ụgbọ ala ahọpụtara zipu n'etiti Gbanyụọ, Prefade (green), Postfade (oroma), na Zipụ (acha anụnụ anụnụ). Mgbe atọrọ izipu (acha anụnụ anụnụ), tụgharịa mkpịsị ugodi ahụ ka ịhazie uru izipu ọwa na bọs ahụ.
EQ Routing (Ch 1-16 naanị): Gbanwee knob ka ịhọrọ ma etinyere EQ tupu ma ọ bụ mechaa ma ọ bụ gbanyụọ.
AMix: Pịa (Ch 1-16 naanị) knob ka ịhọrọ ọwa maka automixer. Ederede ubi ahụ na-acha ntụ ntụ ma ọ bụrụ na automixer nwere nkwarụ, agbanyere odo odo Dugan yana akwụkwọ ndụ akwụkwọ ndụ ma ọ bụrụ na agbanyere MixAssist. N'ihi na Ch 17-32 AMix jiri uru Trim dochie ya. Tụgharịa ka ịhazie uru mbelata ọwa ahọpụtara.

Pan: Tụgharịa igodo iji dozie pan. Pịa mkpịsị aka na pan etiti
BusL, BusR: Pịa knob ka ị gawa Bus L, R , prefade (green), postfade (oroma), ma ọ bụ na-ewepụghị (gbanyụọ).

Otu esi eme ka CL-16 nwee mmetụta dị ka igwekota analog

Mpempe ọwa igwekota analog na-agụnye trim, fader, solo, ogbi, pan na EQ. CL-16 nwere mmetụta yiri nke ahụ na ndị fader ya raara onwe ya nye, trims, solos (PFLs), na ogbi. Site na ịtọ CL-16 na ọnọdụ EQ dịka LF EQ (Hold Bank then Arm), eriri elu na etiti nke ọwa ahụ na-enye ohere ịnweta njikwa EQ ma nyekwuo mmetụta nke ọwa analog.

Nsonaazụ
Na ụdịdị niile ma ewezuga Ọwa Fat, EQ na Bus na-eziga na ụdị Faders, tụgharịa knobs dị elu iji dozie uru mmepụta wee pịa bọtịnụ elu ka ị na-ejide NchNhr ka mebie nsonaazụ.

Njikwa .gbọ njem

KWỤSỊ
Pịa ka kwụsị ịkpọghachi ma ọ bụ ndekọ. Bọtịnụ nkwụsị na-enye ìhè edo edo mgbe kwụsịrị. Mgbe kwụsịrị, pịa nkwụsị ka igosi ihe ọzọ na LCD.
Dekọọ
Pịa ka ịmalite ịdekọ ihe ọhụrụ. Bọtịnụ ndekọ na mpaghara Ozi Isi na-enye ọkụ na-acha uhie uhie mgbe ị na-edekọ.
Mara: Weghachite, Gwuo na Ọsọ n'iru njikwa ụgbọ njem ndabara na bọtịnụ onye ọrụ U1, U2, ands U3, n'otu n'otu.

Ụdị bọtịnụ

Hụ Ụdị/mita Views n'elu maka ozi ndị ọzọ.
PAN/HPF Pịa pan ka ịgbanwee mkpịrịsị etiti ka ọ bụrụ njikwa pan. Mgbe ị na-ejide Bank/ALT, pịa pan ka ịgbanwee knobs etiti gaa na njikwa HPF.
ARM/LF Pịa ma jide ogwe aka iji gosipụta ọkwa ogwe aka na mkpịsị aka, wee pịa otu igodo ka ịgbanwee ogwe aka/ịkwapu. Mgbe ị na-ejide Bank/ALT, pịa
Ogwe aka ka ịgbanwee knobs elu na etiti gaa na njikwa LF EQ.
BANK/ALT Pịa ka igosi na jikwaa Ch 17-32.
BUS/MF Pịa ka igosi na jikwaa ụgbọ ala. Mgbe ị na-ejide Bank/ALT, pịa bọs ka ịgbanwee knobs elu na etiti gaa na njikwa MF EQ.
DLY/HF Pịa ka ịgbanwee mkpịsị etiti ka ị gbuo oge na njikwa ntụgharị polarity. Mgbe ị na-ejide Bank/ALT, pịa Dly ka ịgbanwee knobs elu na etiti gaa na njikwa HF EQ.

Bọtịnụ metadata

Na-edezi metadata maka ihe dị ugbu a ma ọ bụ na-esote. Ka a na-edekọ, a na-edezi metadata nke ugbu a. Ka akwụsịre, enwere ike dezie ihe ikpeazụ e dekọrọ ma ọ bụ metadata nke ọzọ. Mgbe ị nọ na ọnọdụ nkwụsị, pịa Kwụsị ka ịgbanwee n'etiti edezi ihe dị ugbu a na nke ọzọ.
SCENE Pịa ka idezi aha ọnọdụ. Mgbe a na-edekọ, a na-edezi ihe ngosi ihe ugbu a. Mgbe a kwụsịrị, enwere ike dezie ihe nkiri ikpeazụ edekọ ma ọ bụ ihe nkiri ọzọ. Mgbe ị nọ na ọnọdụ nkwụsị, pịa nkwụsị ka ịgbanwee n'etiti edezi ihe nkiri ugbu a na nke ọzọ.

TAKE Pịa iji dezie nọmba were. Na ndekọ, a na-edezi nọmba ewere ugbu a. Na nkwụsị, enwere ike dezigharị ihe ndekọ ikpeazụ ma ọ bụ nọmba ihe ewee ọzọ. Mgbe ị nọ na nkwụsị, pịa nkwụsị ka ịgbanwee n'etiti edezi nọmba ihe nke ugbu a na nke ọzọ.
NDỤMỌDỤ Pịa ka idezi ndetu. Na ndekọ, a na-edezi ndetu ihe ndị dị ugbu a. Na nkwụsị, enwere ike dezie ihe ndekọ ikpeazụ ma ọ bụ ndetu ihe ọzọ. Mgbe ị nọ na nkwụsị, pịa nkwụsị ka ịgbanwee n'etiti edezi ndetu ihe dị ugbu a na nke ọzọ.

bọtịnụ ekenye onye ọrụ

CL-16 na-enye bọtịnụ mmemme nke onye ọrụ ise, U1 ruo U5 maka ịnweta ngwa ngwa ọrụ ise kachasị amasị. A na-akọwa ọrụ ndị ahụ etinyere na bọtịnụ ndị a n'ime bọtịnụ nkọwa onye ọrụ nke mpaghara ozi isi LCD. Kenye ọrụ na bọtịnụ ndị a na njikwa> Mapping> Ọnọdụ mmụta. Enwere ike ịnweta ụzọ mkpirisi bọtịnụ onye ọrụ ise (maka ngụkọta nke iri) site na ijide bọtịnụ Bank/Alt wee pịa U1-U5. Maapụ ndị a site na ijide Alt wee pịa bọtịnụ U na Mapping> Ọnọdụ mmụta. Enwere ike ịdepụta ụfọdụ mgba ọkụ / bọtịnụ ndị ọzọ n'akụkụ aka nri nke CL-16 site na menu a.

Bọtịnụ laghachi / Com
Pịa ka nyochaa nloghachi na ekweisi. Mgbe ị na-eji Scorpio, nyochaa Com Rtn 2 site na ịpị Com Rtn ka ị na-pịa knob HP. Bọtịnụ Com Rtn na-amụba akwụkwọ ndụ akwụkwọ ndụ mgbe ị na-elele Com Rtn 2 na oroma mgbe ị na-elele Com Rtn 1. Pịa Com 1 ka ịgbalite nkwukọrịta Com 1. Pịa Com 2 ka ọ rụọ ọrụ nkwukọrịta Com 2.

bọtịnụ mita
Pịa ka ịpụ na ọnọdụ wee laghachi azụ na preset HP dị ugbu a ka ịlaghachi na mita ụlọ ch 1-16 view.

bọtịnụ menu
Pịa ka ịbanye menu. Jide NchNhr wee pịa mezie ite ka ogbi ọwa. Jide NchNhr wee pịa ngbanwe dị n'elu ahịrị ka ọ daa nsonaazụ (mgbe ahịrị elu na-egosipụta mpụta) Jide NchNhr wee pịa koodu n'etiti ahịrị na ọnọdụ ụgbọ ala ma ọ bụ akara n'elu ahịrị n'ime Bus Send na Faders Mode iji mebie bọs. Jide NchNhr wee bugharịa PFL ngbanwe aka ekpe iji nweta menu dị ka akọwara na Sistemu>NchNhr+PFL Switch Action menu. Na-ekpebi mgbe ọrụ nwa oge ga-amalite. Idede nhọrọ ahọpụtara ogologo oge karịa oge ga-ahazi nhọrọ ahụ ka ọ rụọ ọrụ dị ka nwa oge.

Nkọwapụta

Enwere ike ịgbanwe nkọwapụta na -enweghị ọkwa. Maka ozi kacha ọhụrụ dị na ngwaahịa Ngwa ụda niile, gaa na nke anyị websaịtị: www.sounddevices.com.

VOLTAGE
10-18 V DC na XLR-4. Ntụtụ 4 = +, pin 1 = ala.

DỊRỊ UGBỌ (MIN)
560mA quiescent na 12V DC n'ime, ọdụ ụgbọ mmiri USB niile mepere emepe
ỌRỤ dị ugbu a (MID)
2.93 A, ọdụ ụgbọ mmiri USB ngụkọta ibu 5A
ỌRỤ dị ugbu a (MAX)
5.51 A, ọdụ ụgbọ mmiri USB ngụkọta ibu 10A

Ọdụ ụgbọ mmiri USB-A
5 V, 1.5 A nke ọ bụla
Ọdụ ụgbọ mmiri USB-C
5 V, 3 A nke ọ bụla
ọdụ ụgbọ mmiri dịpụrụ adịpụ, IKE
5 V, 1 A dị na pin 10

ọdụ ụgbọ mmiri dịpụrụ adịpụ, ntinye
60 k ohm ihe ntinye aha Z. Vih = 3.5 V min, Vil = 1.5 V max
ọdụ ụgbọ mmiri dịpụrụ adịpụ, Mpụta
100 ohm mmepụta Z mgbe ahaziri dị ka mmepụta
Mgbanwe Ụkwụ
1 k ohm ụdị ntinye Z. Jikọọ na ala iji rụọ ọrụ (dị ala na-arụ ọrụ).

Ibu:
- 4.71 n'arọ
- (10 lbs 6 oz)

Akụkụ: (HXWXD)
- Ihuenyo gbadara ala
  - 8.01 cm X 43.52 cm X 32.913 cm
  - (3.15 inch. X 17.13 inch. X 12.96 inch.)
- Ekpuchiri ihuenyo
  - 14.64 cm X 43.52 cm X 35.90 cm
  - (5.76 inch. X 17.13 inch. X 14.13 inch.)

Na-eje ozi Faders

Ihe CL-16 nwere atụmatụ Penny & Giles fader na-arụ ọrụ ubi. Enwere ike ịgbanwe ndị fader ngwa ngwa na obere mbọ.
ONYE NKWUKWU:
Penny & Giles 104 mm Linear Akwụkwọ ntuziaka Fader PGF3210

Iwepu onye na-agba ọsọ:

Ntụpụ ụkwụ 1 Wepụ fader knob site na iji nwayọọ dọrọ gị
Nzọụkwụ 2 Wepụ skru na-ejide fader n'ebe. Otu n'elu
Ntụpụ ụkwụ 3 Tụgharịa akụkụ ahụ ka ị nweta ọdụ ụgbọ mmiri fader. Wepu ihe nkedo abụọ ahụ ma wepụ ihe mkpuchi ahụ
Ntụpụ ụkwụ 4 Kwụpụ njikọ eletriki ndị na-agbapụta ọkụ site na ịdọrọ nwayọọ nwayọọ.
Nzọụkwụ 5 Wepu fader.
- Iji wụnye FADER ọhụrụ tụgharịa nzọụkwụ ndị gara aga:
Nzọụkwụ 6 Fader ọhụrụ nnọchi fader. Dochie ya na Penny & Giles 104 mm Linear Manual Fader PGF3210.
Ntụpụ ụkwụ 7 Jikọọkwa njikọ eletriki fader.
Ntụpụ ụkwụ 8 Dochie akụkụ azụ na skru azụ azụ.
Nzọụkwụ 9 Dochie skru abụọ fader.
Ntụpụ ụkwụ 10 Dochie ntụnye fader