Mga Module ng Memorya ng Server DDR4
“
Mga pagtutukoy:
- Uri ng Memory: DDR4 Server Memory (Registered
ECC) - Mga Magagamit na Kapasidad: 8GB, 16GB, 32GB
- Mga Magagamit na Dalas: 2133MHz, 2400MHz
- Voltage: 1.2V
- Configuration ng Pin: 288-pin ECC (Error
Correcting Code) - Pagwawasto ng Error: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
frequency) - Form Factor: DIMM (Dual In-line Memory
Module) - Operating Temperatura: Pagkakatugma
- Pagkakatugma: Server motherboards and X99
chipset motherboards only
Mga Tagubilin sa Paggamit ng Produkto:
Gabay sa Pag-install:
- Power Down the System: I-shut down ang server
completely and disconnect all power cables from the power
panustos. - Buksan ang Server Chassis: Remove the server
cover according to the manufacturer’s instructions to access the
motherboard. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
oryentasyon. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
awtomatiko. - Repeat for Additional Modules: Kung nag-i-install
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
FAQ:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
pinsala.
Q: What processors are recommended for use with this
alaala?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
pagganap?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“`
KLLISRE Server DDR4 Memory
Manual ng Gumagamit at Gabay sa Pag-install I-download bilang Word Document
Natapos ang Produktoview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Mga pagtutukoy
Pagtutukoy Uri ng Memorya Magagamit Mga Kapasidad na Magagamit Mga Dalas Voltage Pin Configuration Error Correction
Nakarehistro
Details DDR4 Server Memory (Registered ECC)
8GB, 16GB, 32GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS Latency
CL15-17 (depending on frequency)
Form Factor
DIMM (Dual In-line Memory Module)
Operating Temperatura
0°C hanggang 85°C
Pagkakatugma
Server motherboards and X99 chipset motherboards only
Mga Katugmang Mga Bahagi
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Inirerekomenda ang mga Motherboard
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Mga Inirerekomendang Processor
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Pag-configure ng Memory
Para sa pinakamainam na pagganap:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Gabay sa Pag-install
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Bitawan ang Mga Retention Clip Buksan ang retention clip sa magkabilang dulo ng memory slot sa pamamagitan ng pagtulak sa kanila palabas.
5 I-align ang Memory Module I-align ang notch sa memory module sa key sa memory slot upang matiyak ang tamang oryentasyon.
6 I-install ang Memory Pindutin nang mahigpit ang memory module hanggang sa awtomatikong pumutok sa lugar ang mga retention clip.
7 Ulitin para sa Mga Karagdagang Module Kung nag-i-install ng maramihang mga module, ulitin ang proseso para sa bawat module, na sinusunod ang inirerekomendang pagkakasunod-sunod ng populasyon ng motherboard.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Pag-troubleshoot
Hindi Mag-boot ang System Pagkatapos ng Pag-install
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Bahagyang Memorya lang ang Natukoy
Mga posibleng dahilan: Maling pagkakaupo ng memorya, hindi tugmang populasyon ng memorya, sira ang puwang ng memorya.
Mga Solusyon: I-reset ang mga module ng memorya, kumonsulta sa manual ng motherboard para sa tamang pagkakasunud-sunod ng populasyon, subukan ang mga module sa iba't ibang mga slot.
Kawalang-tatag o Pag-crash ng System
Mga posibleng dahilan: Hindi tugmang mga setting ng timing ng memorya, sobrang init, hindi sapat na kapangyarihan.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Tandaan: Kung magpapatuloy ang mga problema, subukan ang bawat memory module nang paisa-isa upang matukoy ang mga potensyal na faulty modules. Makipag-ugnayan sa suporta ng KLLISRE kung pinaghihinalaan mo ang isang may sira na produkto.
Impormasyon sa Warranty
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Para sa mga claim sa warranty o teknikal na suporta, mangyaring makipag-ugnayan sa suporta ng KLLISRE kasama ang mga detalye ng iyong pagbili at isang paglalarawan ng isyu.
Hindi saklaw ng warranty na ito ang pinsalang dulot ng aksidente, maling paggamit, pang-aabuso, hindi tamang pag-install, o hindi awtorisadong pagbabago.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Mga Dokumento / Mga Mapagkukunan
 |
KLLISRE Server DDR4 Memory Modules [pdf] User Manual Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |