Server DDR4 Memory Modules
“
Tæknilýsing:
- Tegund minni: DDR4 Server Memory (Registered
ECC) - Laus afkastageta: 8GB, 16GB, 32GB
- Tiltækar tíðnir: 2133MHz, 2400MHz
- Voltage: 1.2V
- Pinnastillingar: 288-pin ECC (Error
Correcting Code) - Villuleiðrétting: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
tíðni) - Formþáttur: DIMM (Dual In-line Memory
Eining) - Rekstrarhitastig: Samhæfni
- Samhæfni: Server motherboards and X99
chipset motherboards only
Notkunarleiðbeiningar fyrir vöru:
Uppsetningarleiðbeiningar:
- Power Down the System: Lokaðu þjóninum
completely and disconnect all power cables from the power
framboð. - Opnaðu netþjónsgrindina: Remove the server
cover according to the manufacturer’s instructions to access the
móðurborði. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
stefnumörkun. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
sjálfkrafa. - Repeat for Additional Modules: Ef þú setur upp
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
Algengar spurningar:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
skemmdir.
Q: What processors are recommended for use with this
minni?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
frammistaða?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“`
KLLISRE Server DDR4 Memory
Notendahandbók og uppsetningarleiðbeiningar Sækja sem Word skjal
Vara lokiðview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Tæknilýsing
Upplýsingar Minni Tegund Tiltækt Rými Tiltæk tíðni Magntage Pin Configuration Error Correction
Skráður
Details DDR4 Server Memory (Registered ECC)
8GB, 16GB, 32GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS bið
CL15-17 (depending on frequency)
Form Factor
DIMM (Tvöfalt innbyggt minniseining)
Rekstrarhitastig
0°C til 85°C
Samhæfni
Server motherboards and X99 chipset motherboards only
Samhæfðir íhlutir
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Ráðlagðar móðurborð
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Ráðlagðir örgjörvar
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Stilling minni
Til að ná sem bestum árangri:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Uppsetningarleiðbeiningar
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Losaðu festingarklemmurnar Opnaðu festingarklemmurnar á báðum endum minnisraufarinnar með því að ýta þeim út á við.
5 Stilltu minniseiningunni saman Stilltu hakinu í minniseiningunni saman við lykilinn í minnisraufinni til að tryggja að hún snúi rétt.
6 Setjið minnið upp Ýtið fast niður á minniseininguna þar til festingarklemmurnar smellpassa sjálfkrafa á sinn stað.
7 Endurtakið fyrir viðbótareiningar Ef margar einingar eru settar upp skal endurtaka ferlið fyrir hverja einingu og fylgja ráðlögðum ísetningarröð móðurborðsins.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Úrræðaleit
Kerfið ræsist ekki eftir uppsetningu
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Aðeins hlutaminni greint
Mögulegar orsakir: Minni rangt sett í, ósamhæft minni, bilað minnisrauf.
Lausnir: Setjið minniseiningarnar aftur í, skoðið handbók móðurborðsins til að sjá rétta röðun á geymslum, prófið einingar í mismunandi raufum.
Óstöðugleiki eða hrun kerfisins
Mögulegar orsakir: Ósamhæfar tímastillingar minnis, ofhitnun, ófullnægjandi orka.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Athugið: Ef vandamálin halda áfram skal prófa hverja minniseiningu fyrir sig til að bera kennsl á hugsanlega gallaða einingu. Hafðu samband við þjónustudeild KLLISRE ef þú grunar að vara sé galluð.
Upplýsingar um ábyrgð
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Vinsamlegast hafið samband við þjónustuver KLLISRE með kaupupplýsingum og lýsingu á vandamálinu vegna ábyrgðarkrafna eða tæknilegrar aðstoðar.
Þessi ábyrgð nær ekki til tjóns sem hlýst af slysum, misnotkun, ofbeldi, óviðeigandi uppsetningu eða óheimilum breytingum.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Skjöl / auðlindir
 |
KLLISRE Server DDR4 Memory Modules [pdfNotendahandbók Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |