Module de memorie DDR4 pentru servere
“
Specificatii:
- Tip memorie: DDR4 Server Memory (Registered
ECC) - Capacitate disponibile: 8 GB, 16 GB, 32 GB
- Frecvențe disponibile: 2133MHz, 2400MHz
- Voltage: 1.2V
- Configurație pin: 288-pin ECC (Error
Correcting Code) - Corectarea erorilor: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
frecvență) - Factor de formă: DIMM (Dual In-line Memory
modul) - Temperatura de functionare: Compatibilitate
- Compatibilitate: Server motherboards and X99
chipset motherboards only
Instrucțiuni de utilizare a produsului:
Ghid de instalare:
- Power Down the System: Închideți serverul
completely and disconnect all power cables from the power
livra. - Deschideți șasiul serverului: Remove the server
cover according to the manufacturer’s instructions to access the
placa de baza. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orientare. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
automat. - Repeat for Additional Modules: Dacă se instalează
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
FAQ:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
deteriora.
Q: What processors are recommended for use with this
memorie?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
performanţă?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
„`
KLLISRE Server DDR4 Memory
Manual de utilizare și ghid de instalare Descărcați ca document Word
Produs terminatview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Specificații
Specificații Tip de memorie Capacitate disponibilă Frecvențe disponibile Volumtage Pin Configuration Error Correction
Înregistrat
Details DDR4 Server Memory (Registered ECC)
8 GB, 16 GB, 32 GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
Latență CAS
CL15-17 (depending on frequency)
Factor de formă
DIMM (modul de memorie dual în linie)
Temperatura de operare
0°C până la 85°C
Compatibilitate
Server motherboards and X99 chipset motherboards only
Componente compatibile
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Plăci de bază recomandate
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Procesoare recomandate
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Configurarea memoriei
Pentru performanțe optime:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Ghid de instalare
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Eliberarea clemelor de fixare Deschideți clemele de fixare de la ambele capete ale slotului de memorie împingându-le spre exterior.
5 Aliniați modulul de memorie Aliniați crestătura din modulul de memorie cu cheia din slotul de memorie pentru a asigura orientarea corectă.
6 Instalați memoria Apăsați ferm pe modulul de memorie până când clemele de fixare se fixează automat în poziție.
7 Repetați pentru module suplimentare Dacă instalați mai multe module, repetați procesul pentru fiecare modul, urmând secvența de populare recomandată de placa de bază.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Depanare
Sistemul nu pornește după instalare
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Doar memorie parțială detectată
Cauze posibile: Memorie instalată incorect, populare incompatibilă a memoriei, slot de memorie defect.
Soluții: Reinstalați modulele de memorie, consultați manualul plăcii de bază pentru ordinea corectă de încărcare, încercați modulele în sloturi diferite.
Instabilitate sau blocaje ale sistemului
Cauze posibile: Setări de temporizare a memoriei incompatibile, supraîncălzire, alimentare insuficientă.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Notă: Dacă problemele persistă, testați fiecare modul de memorie individual pentru a identifica potențialele module defecte. Contactați asistența KLLISRE dacă suspectați un produs defect.
Informații despre garanție
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Pentru reclamații în garanție sau asistență tehnică, vă rugăm să contactați serviciul de asistență KLLISRE, comunicând detaliile achiziției și o descriere a problemei.
Această garanție nu acoperă daunele rezultate în urma accidentelor, utilizării necorespunzătoare, abuzului, instalării necorespunzătoare sau modificărilor neautorizate.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Documente/Resurse
 |
KLLISRE Server DDR4 Memory Modules [pdfManual de utilizare Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |