Server DDR4 Memory Modules
“
Litlhaloso:
- Mofuta oa memori: DDR4 Server Memory (Registered
ECC) - Bokhoni bo Teng: 8GB, 16GB, 32GB
- Maqhubu a fumanehang: 2133MHz, 2400MHz
- Moqtage: 1.2V
- Tlhophiso ea Pin: 288-pin ECC (Error
Correcting Code) - Phoso ea Phoso: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
khafetsa) - Sebopeho sa Foromo: DIMM (Dual In-line Memory
mojule) - Thempereichara ea ho sebetsa: Ho lumellana
- Tšebelisano: Server motherboards and X99
chipset motherboards only
Litaelo tsa Tšebeliso ea Sehlahisoa:
Tataiso ea ho Kenya:
- Power Down the System: Koala seva
completely and disconnect all power cables from the power
phepelo. - Bula Chassis ea Seva: Remove the server
cover according to the manufacturer’s instructions to access the
motherboard. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
tjantjello. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
ka tsela e iketsang. - Repeat for Additional Modules: Haeba o kenya
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
LBH:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
tshenyo.
Q: What processors are recommended for use with this
memori?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
tshebetso?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
"`
KLLISRE Server DDR4 Memory
Bukana ea Mosebelisi le Tataiso ea ho Kenya Khoasolla e le Tokomane ea Lentsoe
Sehlahisoa se Felletseview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Litlhaloso
Tlhaloso ea Mofuta oa Memori e Fumanehang Mekhatlo e Fumanehang Frequencies Voltage Pin Configuration Error Correction
Ngodisitsoe
Details DDR4 Server Memory (Registered ECC)
8GB, 16GB, 32GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
Bokamoso ba CAS
CL15-17 (depending on frequency)
Sebopeho sa Foromo
DIMM (Dual In-line Memory Module)
Mocheso oa ho sebetsa
0°C ho isa ho 85°C
Ho lumellana
Server motherboards and X99 chipset motherboards only
Lisebelisoa tse lumellanang
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Li-Motherboards tse khothalelitsoeng
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Li-processor tse khothalelitsoeng
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Tlhophiso ea Memori
Bakeng sa ts'ebetso e nepahetseng:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Tataiso ea ho Kena
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Lokolla Li-clips tsa ho boloka Bula likhechana tsa ho boloka lintlheng tse peli tsa slot ea memori ka ho li sutumelletsa kantle.
5 Tsepanya Mojule wa Memori Hlophisa notch mojulung wa memori le senotlolo se sekoting sa memori ho netefatsa tshepediso e nepahetseng.
6 Kenya Memory Tobetsa ka thata mojulung wa memori ho fihlela dikotwana tsa ho boloka di iphumanela madulong.
7 Pheta bakeng sa Limojule tse Eketsehileng Haeba u kenya limmojule tse ngata, pheta ts'ebetso bakeng sa mojule ka mong, ho latela tatellano e khothaletsoang ea motherboard.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Ho batle phoso
Sistimi e ke ke ea qala ka mor'a ho kenya
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Ho Fumaneha Mehopolo e sa Feleng
Lisosa tse ka bang teng: Mehopolo e lutseng ka mokhoa o sa lokelang, palo ea batho ba sa lumellaneng, mohopolo o fosahetseng.
Litharollo: Reseat memory modules, sheba bukana ea li-motherboard bakeng sa tatellano e nepahetseng ea baahi, leka li-module libakeng tse fapaneng.
Ho se tsitse ha Sisteme kapa Ho senyeha
Lisosa tse ka bang teng: Litlhophiso tsa nako tsa memori tse sa lumellaneng, ho futhumala ho feteletseng, matla a sa lekaneng.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Tlhokomeliso: Haeba mathata a ntse a tsoela pele, leka mojule ka mong oa memori ka bonngoe ho tseba hore na ho na le mathata a mang. Ikopanye le tšehetso ea KLLISRE haeba u belaella sehlahisoa se nang le phoso.
Boitsebiso ba Warranty
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Bakeng sa likopo tsa waranti kapa tšehetso ea tekheniki, ka kopo ikopanye le ts'ehetso ea KLLISRE ka lintlha tsa hau tsa theko le tlhaloso ea bothata.
Tiisetso ena ha e kenyeletse tšenyo e bakiloeng ke kotsi, tšebeliso e mpe, tlhekefetso, ho kenya ts'ebetso e fosahetseng, kapa liphetoho tse sa lumelloeng.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Litokomane / Lisebelisoa
 |
KLLISRE Server DDR4 Memory Modules [pdf] Bukana ea Mosebelisi Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |