Módulos de memoria DDR4 para servidores
“
Presupuesto:
- Tipo de memoria: DDR4 Server Memory (Registered
ECC) - Capacidades disponibles: 8 GB, 16 GB, 32 GB
- Frecuencias disponibles: 2133 MHz, 2400 MHz
- Volumentage: 1.2 V
- Configuración de pines: 288-pin ECC (Error
Correcting Code) - Corrección de errores: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
frecuencia) - Factor de forma: DIMM (Dual In-line Memory
Módulo) - Temperatura de funcionamiento: Compatibilidad
- Compatibilidad: Server motherboards and X99
chipset motherboards only
Instrucciones de uso del producto:
Guía de instalación:
- Power Down the System: Apagar el servidor
completely and disconnect all power cables from the power
suministrar. - Abra el chasis del servidor: Remove the server
cover according to the manufacturer’s instructions to access the
placa madre. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orientación. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
automáticamente. - Repeat for Additional Modules: Si se instala
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
Preguntas frecuentes:
Q: Can this memory be used in standard desktop
¿placas base?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
daño.
Q: What processors are recommended for use with this
¿memoria?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
¿actuación?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
"`
KLLISRE Server DDR4 Memory
Manual de usuario y guía de instalación Descargar como documento de Word
Producto terminadoview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Presupuesto
Especificación Tipo de memoria Capacidades disponibles Frecuencias disponibles Voltage Pin Configuration Error Correction
Registrado
Details DDR4 Server Memory (Registered ECC)
8 GB, 16 GB, 32 GB
2133 MHz, 2400 MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
Latencia CAS
CL15-17 (depending on frequency)
Factor de forma
DIMM (módulo de memoria dual en línea)
Temperatura de funcionamiento
De 0 °C a 85 °C
Compatibilidad
Server motherboards and X99 chipset motherboards only
Componentes compatibles
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Placas base recomendadas
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Procesadores recomendados
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Configuración de memoria
Para un rendimiento óptimo:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Guía de instalación
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4. Suelte los clips de retención Abra los clips de retención en ambos extremos de la ranura de memoria empujándolos hacia afuera.
5 Alinee el módulo de memoria Alinee la muesca en el módulo de memoria con la llave en la ranura de memoria para asegurar una orientación adecuada.
6 Instale la memoria Presione firmemente el módulo de memoria hasta que los clips de retención encajen en su lugar automáticamente.
7 Repita para módulos adicionales Si instala varios módulos, repita el proceso para cada uno, siguiendo la secuencia de instalación recomendada por la placa base.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Solución de problemas
El sistema no arranca después de la instalación
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Sólo se detectó memoria parcial
Posibles causas: Memoria mal colocada, población de memoria incompatible, ranura de memoria defectuosa.
Soluciones: vuelva a colocar los módulos de memoria, consulte el manual de la placa base para conocer el orden de instalación correcto y pruebe los módulos en diferentes ranuras.
Inestabilidad o fallos del sistema
Posibles causas: configuraciones de sincronización de memoria incompatibles, sobrecalentamiento, energía insuficiente.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Nota: Si el problema persiste, pruebe cada módulo de memoria individualmente para identificar posibles módulos defectuosos. Contacte con el soporte de KLLISRE si sospecha que el producto está defectuoso.
Información de garantía
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Para reclamos de garantía o soporte técnico, comuníquese con el soporte de KLLISRE con los detalles de su compra y una descripción del problema.
Esta garantía no cubre daños resultantes de accidentes, mal uso, abuso, instalación incorrecta o modificaciones no autorizadas.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Documentos / Recursos
 |
KLLISRE Server DDR4 Memory Modules [pdf] Manual del usuario Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |