Server DDR4 Memory Modules
“
Espesifikasyon:
- Kalite memwa: DDR4 Server Memory (Registered
ECC) - Kapasite ki disponib: 8GB, 16GB, 32GB
- Frekans ki disponib: 2133MHz, 2400MHz
- Voltage: 1.2V
- Konfigirasyon PIN: 288-pin ECC (Error
Correcting Code) - Koreksyon erè: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
frekans) - Faktè fòm: DIMM (Dual In-line Memory
Modil) - Tanperati operasyon: Konpatibilite
- Konpatibilite: Server motherboards and X99
chipset motherboards only
Enstriksyon Itilizasyon pwodwi:
Gid enstalasyon:
- Power Down the System: Fèmen sèvè a
completely and disconnect all power cables from the power
rezèv. - Louvri chasi sèvè a: Remove the server
cover according to the manufacturer’s instructions to access the
mèr. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
oryantasyon. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
otomatikman. - Repeat for Additional Modules: Si enstale
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
FAQ:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
domaj.
Q: What processors are recommended for use with this
memwa?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
pèfòmans?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
"`
KLLISRE Server DDR4 Memory
Telechaje Manyèl Itilizatè ak Gid Enstalasyon kòm Dokiman Word
Pwodwi souview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Espesifikasyon
Espesifikasyon Kalite memwa Kapasite disponib Frekans disponib Volimtage Pin Configuration Error Correction
Anrejistre
Details DDR4 Server Memory (Registered ECC)
8GB, 16GB, 32GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
Latansi CAS
CL15-17 (depending on frequency)
Faktè fòm
DIMM (Modil Memwa Doub Anliy)
Tanperati Fonksyònman
0 ° C a 85 ° C
Konpatibilite
Server motherboards and X99 chipset motherboards only
Eleman konpatib
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Kat manman rekòmande
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Prosesè Rekòmande
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Konfigirasyon memwa
Pou pèfòmans optimal:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Gid enstalasyon
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Lage klip retansyon yo Louvri klip retansyon yo nan tou de bout fant memwa a lè w pouse yo deyò.
5 Aliyen Modil Memwa a Aliyen dan ki nan modil memwa a ak kle ki nan fant memwa a pou asire bon oryantasyon an.
6 Enstale memwa a Peze modil memwa a byen fèm jiskaske klip retansyon yo antre nan plas yo otomatikman.
7 Repete pou Modil Anplis yo Si w ap enstale plizyè modil, repete pwosesis la pou chak modil, swivan sekans popilasyon rekòmande sou kat manman an.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Depanaj
Sistèm nan pa pral demarre apre enstalasyon an
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Se sèlman yon pati nan memwa detekte
Kòz posib: Memwa ki mal enstale, popilasyon memwa ki enkonpatib, plas memwa ki defektye.
Solisyon yo: Remete modil memwa yo, konsilte manyèl kat manman an pou konnen kijan pou yo ranpli modil yo byen, eseye modil yo nan diferan plas.
Enstabilite Sistèm oswa Aksidan
Kòz posib: Paramèt tan memwa ki pa konpatib, surchof, pouvwa ensifizan.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Nòt: Si pwoblèm yo pèsiste, teste chak modil memwa endividyèlman pou idantifye modil ki ka gen defo. Kontakte sipò KLLISRE si ou sispèk yon pwodwi ki defektye.
Enfòmasyon sou Garanti
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Pou reklamasyon garanti oswa sipò teknik, tanpri kontakte sipò KLLISRE avèk detay acha ou yo ak yon deskripsyon pwoblèm nan.
Garanti sa a pa kouvri domaj ki rive akoz aksidan, move itilizasyon, abi, enstalasyon ki pa kòrèk, oswa modifikasyon ki pa otorize.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokiman / Resous
 |
KLLISRE Server DDR4 Memory Modules [pdfManyèl Itilizatè Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |