راهنمای کاربری ماژول‌های حافظه DDR4 سرور KLLISRE

ماژول‌های حافظه DDR4 سرور

مشخصات:

  • نوع حافظه: DDR4 Server Memory (Registered
    ECC)
  • ظرفیت های موجود: 8 گیگابایت، 16 گیگابایت، 32 گیگابایت
  • فرکانس های موجود: 2133 مگاهرتز، 2400 مگاهرتز
  • جلدtage: 1.2 ولت
  • پیکربندی پین: 288-pin ECC (Error
    Correcting Code)
  • تصحیح خطا: Yes (Includes Register
    between DRAM and Memory Controller)
  • CAS Latency: CL15-17 (depending on
    فرکانس)
  • فاکتور فرم: DIMM (Dual In-line Memory
    مدول)
  • دمای عملیاتی: سازگاری
  • سازگاری: Server motherboards and X99
    chipset motherboards only

دستورالعمل استفاده از محصول:

راهنمای نصب:

  1. Power Down the System: سرور را خاموش کنید
    completely and disconnect all power cables from the power
    عرضه
  2. شاسی سرور را باز کنید: Remove the server
    cover according to the manufacturer’s instructions to access the
    مادربرد
  3. Locate Memory Slots: Identify the memory slots
    on your server motherboard. Consult your motherboard manual for
    optimal slot population order.
  4. Release Retention Clips: Open the retention
    clips at both ends of the memory slot by pushing them outward.
  5. Align the Memory Module: Align the notch in
    the memory module with the key in the memory slot to ensure proper
    جهت گیری
  6. Install the Memory: Firmly press down on the
    memory module until the retention clips snap into place
    به صورت خودکار
  7. Repeat for Additional Modules: در صورت نصب
    multiple modules, repeat the process for each module, following the
    motherboard’s recommended population sequence.

سوالات متداول:

Q: Can this memory be used in standard desktop
motherboards?

A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
آسیب.

Q: What processors are recommended for use with this
حافظه؟

A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.

Q: How should I configure the memory for optimal
کارایی؟

A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.

"`

KLLISRE Server DDR4 Memory
دانلود دفترچه راهنما و راهنمای نصب به صورت فایل ورد
محصول تمام شده استview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
مشخصات

مشخصات نوع حافظه ظرفیت‌های موجود فرکانس‌های موجود جلدtage Pin Configuration Error Correction
ثبت شده است

Details DDR4 Server Memory (Registered ECC)
8 گیگابایت، 16 گیگابایت، 32 گیگابایت
2133 مگاهرتز، 2400 مگاهرتز
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)

CAS تأخیر

CL15-17 (depending on frequency)

فاکتور فرم

ماژول حافظه دو خطی (DIMM)

دمای عملیاتی

0 تا 85 درجه سانتی گراد

سازگاری

Server motherboards and X99 chipset motherboards only

اجزای سازگار

Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
مادربردهای پیشنهادی
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
پردازنده‌های پیشنهادی
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
پیکربندی حافظه

برای عملکرد مطلوب:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
راهنمای نصب
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
۴- گیره‌های نگهدارنده را آزاد کنید. گیره‌های نگهدارنده در دو انتهای شیار حافظه را با فشار دادن آنها به سمت بیرون باز کنید.

۵- ماژول حافظه را تراز کنید. شیار ماژول حافظه را با کلید موجود در شیار حافظه تراز کنید تا از جهت گیری صحیح آن اطمینان حاصل شود.
6 حافظه را نصب کنید. ماژول حافظه را محکم به پایین فشار دهید تا گیره‌های نگهدارنده به طور خودکار در جای خود قرار گیرند.
۷ برای ماژول‌های اضافی تکرار کنید. در صورت نصب چندین ماژول، این فرآیند را برای هر ماژول تکرار کنید و ترتیب جمعیتی توصیه شده توسط مادربرد را دنبال کنید.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
عیب یابی
سیستم بعد از نصب بالا نمیاد
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
فقط حافظه جزئی شناسایی شد

دلایل احتمالی: حافظه به درستی نصب نشده، تعداد حافظه ناسازگار، اسلات حافظه معیوب.
راه حل ها: ماژول های حافظه را دوباره نصب کنید، برای ترتیب صحیح قرارگیری ماژول ها به دفترچه راهنمای مادربرد مراجعه کنید، ماژول ها را در اسلات های مختلف امتحان کنید.
ناپایداری یا خرابی سیستم
دلایل احتمالی: تنظیمات زمان‌بندی حافظه ناسازگار، گرمای بیش از حد، برق ناکافی.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
توجه: اگر مشکلات همچنان ادامه داشت، هر ماژول حافظه را جداگانه آزمایش کنید تا ماژول‌های معیوب احتمالی شناسایی شوند. در صورت مشکوک بودن به محصول معیوب، با پشتیبانی KLLISRE تماس بگیرید.
اطلاعات گارانتی

KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
برای درخواست گارانتی یا پشتیبانی فنی، لطفاً با پشتیبانی KLLISRE تماس بگیرید و جزئیات خرید خود و شرح مشکل را ارائه دهید.
این ضمانت‌نامه شامل خسارات ناشی از تصادف، استفاده نادرست، سوءاستفاده، نصب نادرست یا تغییرات غیرمجاز نمی‌شود.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.

اسناد / منابع

KLLISRE Server DDR4 Memory Modules [pdf] دفترچه راهنمای کاربر
Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules

مراجع

نظر بدهید

آدرس ایمیل شما منتشر نخواهد شد. فیلدهای الزامی مشخص شده اند *