Server DDR4 Memory Modules
“
Speċifikazzjonijiet:
- Tip ta' Memorja: DDR4 Server Memory (Registered
ECC) - Kapaċitajiet Disponibbli: 8GB, 16GB, 32GB
- Frekwenzi Disponibbli: 2133MHz, 2400MHz
- Voltage: 1.2V
- Konfigurazzjoni tal-pin: 288-pin ECC (Error
Correcting Code) - Korrezzjoni ta' Żbalji: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
frekwenza) - Fattur tal-Formola: DIMM (Dual In-line Memory
Modulu) - Temperatura operattiva: Kompatibilità
- Kompatibilità: Server motherboards and X99
chipset motherboards only
Istruzzjonijiet għall-Użu tal-Prodott:
Gwida għall-Installazzjoni:
- Power Down the System: Itfi s-server
completely and disconnect all power cables from the power
provvista. - Iftaħ ix-Chassis tas-Server: Remove the server
cover according to the manufacturer’s instructions to access the
motherboard. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orjentazzjoni. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
awtomatikament. - Repeat for Additional Modules: Jekk tinstalla
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
FAQ:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
ħsara.
Q: What processors are recommended for use with this
memorja?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
prestazzjoni?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
"`
KLLISRE Server DDR4 Memory
Manwal tal-Utent u Gwida għall-Installazzjoni Niżżel bħala Dokument Word
Prodott Overview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Speċifikazzjonijiet
Speċifikazzjoni Tip ta' Memorja Kapaċitajiet Disponibbli Frekwenzi Disponibbli Volumtage Pin Configuration Error Correction
Reġistrat
Details DDR4 Server Memory (Registered ECC)
8GB, 16GB, 32GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS Latency
CL15-17 (depending on frequency)
Fattur tal-Formola
DIMM (Modulu tal-Memorja Doppja In-line)
Temperatura operattiva
0°C sa 85°C
Kompatibilità
Server motherboards and X99 chipset motherboards only
Komponenti Kompatibbli
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Motherboards Rakkomandati
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Proċessuri Rakkomandati
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Konfigurazzjoni tal-Memorja
Għal prestazzjoni ottimali:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Gwida għall-Installazzjoni
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Ħoll il-Klipps taż-Żamma Iftaħ il-klipps taż-żamma fiż-żewġt itruf tas-slott tal-memorja billi timbottahom 'il barra.
5 Allinja l-Modulu tal-Memorja Allinja l-islott fil-modulu tal-memorja maċ-ċavetta fis-slott tal-memorja biex tiżgura orjentazzjoni xierqa.
6 Installa l-Memorja Agħfas sew 'l isfel fuq il-modulu tal-memorja sakemm il-klipps taż-żamma jidħlu f'posthom awtomatikament.
7 Irrepeti għal Moduli Addizzjonali Jekk tinstalla diversi moduli, irrepeti l-proċess għal kull modulu, billi ssegwi s-sekwenza tal-popolazzjoni rakkomandata tal-motherboard.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Issolvi l-problemi
Is-Sistema Mhux Se Tibbutja Wara l-Installazzjoni
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Memorja Parzjali Biss skoperta
Kawżi possibbli: Memorja mqiegħda ħażin, popolazzjoni tal-memorja inkompatibbli, slott tal-memorja difettuż.
Soluzzjonijiet: Erġa' poġġi l-moduli tal-memorja, ikkonsulta l-manwal tal-motherboard għall-ordni xierqa tal-popolazzjoni, ipprova l-moduli fi slots differenti.
Instabbiltà jew Ħabtiet tas-Sistema
Kawżi possibbli: Settings tal-ħin tal-memorja inkompatibbli, sħana żejda, enerġija insuffiċjenti.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Nota: Jekk il-problemi jippersistu, ittestja kull modulu tal-memorja individwalment biex tidentifika moduli potenzjalment difettużi. Ikkuntattja l-appoġġ ta' KLLISRE jekk tissuspetta prodott difettuż.
Informazzjoni dwar Garanzija
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Għal talbiet ta' garanzija jew appoġġ tekniku, jekk jogħġbok ikkuntattja l-appoġġ ta' KLLISRE bid-dettalji tax-xiri tiegħek u deskrizzjoni tal-problema.
Din il-garanzija ma tkoprix ħsara li tirriżulta minn aċċident, użu ħażin, abbuż, installazzjoni mhux xierqa, jew modifiki mhux awtorizzati.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokumenti / Riżorsi
 |
KLLISRE Server DDR4 Memory Modules [pdfManwal tal-Utent Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |