Server DDR4 Memory Modules
“
specifikacije:
- Vrsta memorije: DDR4 Server Memory (Registered
ECC) - Dostupni kapaciteti: 8GB, 16GB, 32GB
- Dostupne frekvencije: 2133MHz, 2400MHz
- Voltage: 1.2V
- Konfiguracija pinova: 288-pin ECC (Error
Correcting Code) - Ispravka greške: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
učestalost) - Form Faktor: DIMM (Dual In-line Memory
modul) - Radna temperatura: Kompatibilnost
- Kompatibilnost: Server motherboards and X99
chipset motherboards only
Upute za upotrebu proizvoda:
Vodič za instalaciju:
- Power Down the System: Isključite server
completely and disconnect all power cables from the power
snabdevanje. - Otvorite kućište servera: Remove the server
cover according to the manufacturer’s instructions to access the
matična ploča. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orijentacija. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
automatski. - Repeat for Additional Modules: Ako se instalira
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
FAQ:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
oštećenja.
Q: What processors are recommended for use with this
memorija?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
performanse?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“`
KLLISRE Server DDR4 Memory
Preuzmite korisnički priručnik i vodič za instalaciju kao Word dokument
Product Overview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Specifikacije
Specifikacija Tip memorije Dostupni kapaciteti Dostupne frekvencije Volumentage Pin Configuration Error Correction
Registrovan
Details DDR4 Server Memory (Registered ECC)
8GB, 16GB, 32GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS Latency
CL15-17 (depending on frequency)
Form Factor
DIMM (Dvostruki linijski memorijski modul)
Radna temperatura
0°C do 85°C
Kompatibilnost
Server motherboards and X99 chipset motherboards only
Kompatibilne komponente
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Preporučene matične ploče
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Preporučeni procesori
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Konfiguracija memorije
Za optimalne performanse:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Vodič za instalaciju
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Otpustite kopče za zadržavanje Otvorite kopče za zadržavanje na oba kraja memorijskog utora tako što ćete ih gurnuti prema van.
5 Poravnajte memorijski modul Poravnajte zarez na memorijskom modulu s ključem u memorijskom utoru kako biste osigurali pravilnu orijentaciju.
6 Instalirajte memoriju Čvrsto pritisnite memorijski modul dok se kopče za zadržavanje automatski ne uklope na svoje mjesto.
7 Ponovite za dodatne module Ako instalirate više modula, ponovite postupak za svaki modul, slijedeći preporučeni redoslijed popunjavanja matične ploče.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Rješavanje problema
Sistem se neće pokrenuti nakon instalacije
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Otkrivena je samo djelomična memorija
Mogući uzroci: Nepravilno postavljena memorija, nekompatibilna popunjenost memorije, neispravan utor za memoriju.
Rješenja: Ponovo postavite memorijske module, pogledajte priručnik matične ploče za pravilan redoslijed postavljanja modula, isprobajte module u različitim slotovima.
Nestabilnost ili padovi sistema
Mogući uzroci: Nekompatibilne postavke vremena memorije, pregrijavanje, nedovoljna snaga.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Napomena: Ako problemi i dalje postoje, testirajte svaki memorijski modul pojedinačno kako biste identificirali potencijalno neispravne module. Obratite se podršci KLLISRE-a ako sumnjate na neispravan proizvod.
Informacije o garanciji
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Za reklamacije u vezi s garancijom ili tehničkom podrškom, obratite se podršci KLLISRE-a s detaljima o kupovini i opisom problema.
Ova garancija ne pokriva štetu nastalu usljed nezgode, pogrešne upotrebe, zloupotrebe, nepravilne instalacije ili neovlaštenih modifikacija.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokumenti / Resursi
 |
KLLISRE Server DDR4 Memory Modules [pdf] Korisnički priručnik Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |