Servera DDR4 atmiņas moduļi
“
Specifikācijas:
- Atmiņas veids: DDR4 Server Memory (Registered
ECC) - Pieejamās jaudas: 8GB, 16GB, 32GB
- Pieejamās frekvences: 2133MHz, 2400MHz
- Voltage: 1.2V
- Piespraudes konfigurācija: 288-pin ECC (Error
Correcting Code) - Kļūdu labojums: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
biežums) - Formas faktors: DIMM (Dual In-line Memory
modulis) - Darba temperatūra: Saderība
- Saderība: Server motherboards and X99
chipset motherboards only
Produkta lietošanas instrukcijas:
Uzstādīšanas rokasgrāmata:
- Power Down the System: Izslēdziet serveri
completely and disconnect all power cables from the power
piegāde. - Atveriet servera šasiju: Remove the server
cover according to the manufacturer’s instructions to access the
mātesplatē. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orientācija. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
automātiski. - Repeat for Additional Modules: Ja instalējat
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
FAQ:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
bojājumu.
Q: What processors are recommended for use with this
atmiņa?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
sniegums?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“`
KLLISRE Server DDR4 Memory
Lietotāja rokasgrāmata un instalēšanas rokasgrāmata Lejupielādēt kā Word dokumentu
Produkts beidziesview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Specifikācijas
Specifikācija Atmiņas tips Pieejamās ietilpības Pieejamās frekvences Apjomstage Pin Configuration Error Correction
Reģistrēts
Details DDR4 Server Memory (Registered ECC)
8GB, 16GB, 32GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS latentums
CL15-17 (depending on frequency)
Formas faktors
DIMM (divrindu atmiņas modulis)
Darba temperatūra
0°C līdz 85°C
Saderība
Server motherboards and X99 chipset motherboards only
Saderīgie komponenti
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Ieteicamās mātesplates
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Ieteicamie procesori
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Atmiņas konfigurācija
Optimālai veiktspējai:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Uzstādīšanas rokasgrāmata
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4. Atbrīvojiet fiksācijas skavas. Atveriet fiksācijas skavas atmiņas slota abos galos, pabīdot tās uz āru.
5. Izlīdziniet atmiņas moduli. Izlīdziniet atmiņas moduļa ierobu ar atmiņas slota atslēgu, lai nodrošinātu pareizu orientāciju.
6 Atmiņas ievietošana Stingri nospiediet atmiņas moduli uz leju, līdz fiksatori automātiski nofiksējas savās vietās.
7 Atkārtojiet šo procesu papildu moduļiem. Ja instalējat vairākus moduļus, atkārtojiet procesu katram modulim, ievērojot mātesplates ieteikto ievietošanas secību.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Problēmu novēršana
Sistēma neieslēdzas pēc instalēšanas
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Konstatēta tikai daļēja atmiņa
Iespējamie cēloņi: Nepareizi ievietota atmiņa, nesaderīga atmiņas ietilpība, bojāts atmiņas slots.
Risinājumi: Ievietojiet atmiņas moduļus atkārtoti, skatiet mātesplates rokasgrāmatu, lai uzzinātu pareizo ievietošanas secību, izmēģiniet moduļus dažādos slotos.
Sistēmas nestabilitāte vai avārijas
Iespējamie cēloņi: Nesaderīgi atmiņas laika iestatījumi, pārkaršana, nepietiekama jauda.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Piezīme. Ja problēmas joprojām pastāv, pārbaudiet katru atmiņas moduli atsevišķi, lai identificētu potenciāli bojātos moduļus. Ja jums ir aizdomas par bojātu produktu, sazinieties ar KLLISRE atbalsta dienestu.
Garantijas informācija
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Lai iesniegtu garantijas prasības vai saņemtu tehnisko atbalstu, lūdzu, sazinieties ar KLLISRE atbalsta dienestu, norādot pirkuma informāciju un problēmas aprakstu.
Šī garantija neattiecas uz bojājumiem, kas radušies negadījuma, nepareizas lietošanas, ļaunprātīgas izmantošanas, nepareizas uzstādīšanas vai neatļautu modifikāciju rezultātā.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokumenti / Resursi
 |
KLLISRE Server DDR4 Memory Modules [pdfLietotāja rokasgrāmata Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |