Server DDR4 Memory Modules
“
وضاحتون:
- ميموري جو قسم: DDR4 Server Memory (Registered
ECC) - موجود صلاحيتون: 8GB، 16GB، 32GB
- دستياب تعدد: 2133MHz، 2400MHz
- جلدtage: 1.2V
- پن جي ٺاھ جوڙ: 288-pin ECC (Error
Correcting Code) - غلطي جي اصلاح: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
تعدد) - فارم فيڪٽر: DIMM (Dual In-line Memory
ماڊل) - آپريٽنگ گرمي پد: مطابقت
- مطابقت: Server motherboards and X99
chipset motherboards only
پيداوار جي استعمال جون هدايتون:
انسٽاليشن ھدايت:
- Power Down the System: سرور بند ڪريو
completely and disconnect all power cables from the power
فراهمي. - Open the Server Chassis: Remove the server
cover according to the manufacturer’s instructions to access the
ماءُ بورڊ. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
رخ. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
خودڪار. - Repeat for Additional Modules: جيڪڏهن انسٽال ڪريو
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
اڪثر سوال:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
نقصان.
Q: What processors are recommended for use with this
ياداشت؟
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
ڪارڪردگي؟
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“`
KLLISRE Server DDR4 Memory
استعمال ڪندڙ دستي ۽ انسٽاليشن گائيڊ ورڊ دستاويز جي طور تي ڊائون لوڊ ڪريو
پيداوار ختمview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
وضاحتون
وضاحت ياداشت جو قسم دستياب صلاحيتون دستياب تعدد جلدtage Pin Configuration Error Correction
رجسٽر ٿيل
Details DDR4 Server Memory (Registered ECC)
8GB، 16GB، 32GB
2133MHz، 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS دير سان
CL15-17 (depending on frequency)
فارم فيڪٽر
DIMM (ڊبل ان لائن ميموري ماڊيول)
آپريٽنگ جي درجه حرارت
0°C کان 85°C
مطابقت
Server motherboards and X99 chipset motherboards only
مطابقت رکندڙ اجزاء
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
تجويز ڪيل مدر بورڊ
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
تجويز ڪيل پروسيسر
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
ياداشت جي ترتيب
بھترين ڪارڪردگيءَ لاءِ:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
انسٽاليشن ھدايت
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 رليز ريٽينشن ڪلپس ميموري سلاٽ جي ٻنهي ڇيڙن تي ريٽينشن ڪلپس کي ٻاهر ڌڪي کوليو.
5 ميموري ماڊيول کي ترتيب ڏيو. صحيح رخ کي يقيني بڻائڻ لاءِ ميموري ماڊيول ۾ نشان کي ميموري سلاٽ ۾ چاٻي سان ترتيب ڏيو.
6 ميموري انسٽال ڪريو. ميموري ماڊيول کي مضبوطيءَ سان دٻايو جيستائين ريٽينشن ڪلپس پاڻمرادو جاءِ تي نه اچن.
7 اضافي ماڊيولز لاءِ ورجايو جيڪڏهن ڪيترائي ماڊيول انسٽال ڪري رهيا آهيو، ته هر ماڊيول لاءِ عمل کي ورجايو، مدر بورڊ جي تجويز ڪيل آبادي جي ترتيب تي عمل ڪندي.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
مشڪلاتون
انسٽاليشن کان پوءِ سسٽم بوٽ نه ٿيندو
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
صرف جزوي ياداشت معلوم ڪئي وئي
ممڪن سبب: غلط طور تي رکيل ياداشت، غير مطابقت رکندڙ ياداشت جي آبادي، ناقص ياداشت سلاٽ.
حل: ميموري ماڊيولز کي ٻيهر سيٽ ڪريو، صحيح آبادي جي ترتيب لاءِ مدر بورڊ مينوئل سان صلاح ڪريو، مختلف سلاٽ ۾ ماڊيولز آزمايو.
سسٽم جي عدم استحڪام يا ڪرشز
ممڪن سبب: غير مطابقت رکندڙ ميموري ٽائيمنگ سيٽنگون، اوور هيٽنگ، ناکافي بجلي.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
نوٽ: جيڪڏهن مسئلا برقرار رهن ٿا، ته ممڪن ناقص ماڊلز جي سڃاڻپ لاءِ هر ميموري ماڊيول کي الڳ الڳ جانچيو. جيڪڏهن توهان کي خراب پراڊڪٽ جو شڪ آهي ته KLLISRE سپورٽ سان رابطو ڪريو.
وارنٽي ڄاڻ
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
وارنٽي دعوائن يا ٽيڪنيڪل سپورٽ لاءِ، مھرباني ڪري پنھنجي خريداري جي تفصيل ۽ مسئلي جي وضاحت سان KLLISRE سپورٽ سان رابطو ڪريو.
هي وارنٽي حادثي، غلط استعمال، غلط استعمال، غلط تنصيب، يا غير مجاز ترميمن جي نتيجي ۾ ٿيندڙ نقصان کي ڍڪي نه ٿي.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
دستاويز / وسيلا
 |
KLLISRE Server DDR4 Memory Modules [pdf] استعمال ڪندڙ دستياب Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |