Zerbitzarien DDR4 memoria moduluak
“
Zehaztapenak:
- Memoria mota: DDR4 Server Memory (Registered
ECC) - Eskuragarri dauden edukierak: 8 GB, 16 GB, 32 GB
- Eskuragarri dauden maiztasunak: 2133MHz, 2400MHz
- liburukiatage: 1.2V
- Pin konfigurazioa: 288-pin ECC (Error
Correcting Code) - Akatsen zuzenketa: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
frekuentzia) - Forma-faktorea: DIMM (Dual In-line Memory
modulua) - Funtzionamendu-tenperatura: Bateragarritasuna
- Bateragarritasuna: Server motherboards and X99
chipset motherboards only
Produktuak erabiltzeko jarraibideak:
Instalazio Gida:
- Power Down the System: Itzali zerbitzaria
completely and disconnect all power cables from the power
hornidura. - Ireki zerbitzariaren txasa: Remove the server
cover according to the manufacturer’s instructions to access the
plaka nagusia. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orientazioa. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
automatikoki. - Repeat for Additional Modules: Instalatzen bada
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
Ohiko galderak:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
kalteak.
Q: What processors are recommended for use with this
oroimena?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
errendimendua?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“`
KLLISRE Server DDR4 Memory
Erabiltzailearen eskuliburua eta instalazio gida Word dokumentu gisa deskargatu
Produktua amaituview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Zehaztapenak
Zehaztapena Memoria mota Eskuragarri dauden edukierak Eskuragarri dauden maiztasunak Bolumentage Pin Configuration Error Correction
Erregistratua
Details DDR4 Server Memory (Registered ECC)
8 GB, 16 GB, 32 GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS Latentzia
CL15-17 (depending on frequency)
Forma-faktorea
DIMM (Bi Lerroko Memoria Modulua)
Funtzionamendu-tenperatura
0°C eta 85°C artean
Bateragarritasuna
Server motherboards and X99 chipset motherboards only
Osagai bateragarriak
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Gomendatutako plaka baseak
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Gomendatutako prozesadoreak
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Memoriaren konfigurazioa
Errendimendu optimoa lortzeko:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Instalazio Gida
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Askatu atxikipen-klipak Ireki memoria-zirrikituaren bi muturretan dauden atxikipen-klipak kanporantz bultzatuz.
5 Memoria-modulua lerrokatu Lerrokatu memoria-moduluko koska memoria-zirrikituan dagoen giltzarekin, orientazio egokia bermatzeko.
6 Memoria instalatu Sakatu gogor memoria-modulua, atxikipen-klipak automatikoki bere lekuan sartu arte.
7 Errepikatu modulu gehigarriekin Modulu bat baino gehiago instalatzen badituzu, errepikatu prozesua modulu bakoitzerako, plaka baseak gomendatutako populazio-sekuentzia jarraituz.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Arazoak konpontzea
Sistemak ez du abiaraziko instalazioa egin ondoren
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Memoria partziala bakarrik detektatu da
Kausa posibleak: Memoria gaizki kokatuta, memoria-populazio bateraezina, memoria-zirrikitu akastuna.
Irtenbideak: memoria-moduluak berriro jarri, plaka basearen eskuliburua kontsultatu populazio-ordena egokia ikusteko, eta moduluak zirrikitu desberdinetan probatu.
Sistemaren ezegonkortasuna edo kraskadurak
Arrazoi posibleak: Memoria-denboraren ezarpen bateraezinak, gehiegi berotzea, energia nahikoa ez izatea.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Oharra: Arazoak konpontzen ez badira, probatu memoria-modulu bakoitza banan-banan akastunak izan daitezkeen moduluak identifikatzeko. Jarri harremanetan KLLISREren laguntzarekin produktu akastun bat susmatzen baduzu.
Bermearen informazioa
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Bermearen erreklamazioetarako edo laguntza teknikorako, jarri harremanetan KLLISREren laguntzarekin zure erosketaren xehetasunak eta arazoaren deskribapenarekin.
Berme honek ez ditu estaltzen istripu, erabilera oker, gehiegikeria, instalazio desegoki edo baimenik gabeko aldaketen ondoriozko kalteak.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokumentuak / Baliabideak
 |
KLLISRE Server DDR4 Memory Modules [pdfErabiltzailearen eskuliburua Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |