Modul Memori DDR4 Pelayan
“
Spesifikasi:
- Jenis Memori: DDR4 Server Memory (Registered
ECC) - Kapasiti Tersedia: 8GB, 16GB, 32GB
- Frekuensi Tersedia: 2133MHz, 2400MHz
- Voltage: 1.2V
- Konfigurasi Pin: 288-pin ECC (Error
Correcting Code) - Pembetulan Ralat: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
kekerapan) - Faktor Bentuk: DIMM (Dual In-line Memory
modul) - Suhu Operasi: Keserasian
- Keserasian: Server motherboards and X99
chipset motherboards only
Arahan Penggunaan Produk:
Panduan Pemasangan:
- Power Down the System: Tutup pelayan
completely and disconnect all power cables from the power
bekalan. - Buka Casis Pelayan: Remove the server
cover according to the manufacturer’s instructions to access the
papan induk. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orientasi. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
secara automatik. - Repeat for Additional Modules: Jika memasang
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
Soalan Lazim:
Q: Can this memory be used in standard desktop
papan induk?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
kerosakan.
Q: What processors are recommended for use with this
ingatan?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
prestasi?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“`
KLLISRE Server DDR4 Memory
Manual Pengguna dan Panduan Pemasangan Muat Turun sebagai Dokumen Word
Produk Selesaiview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Spesifikasi
Spesifikasi Jenis Memori Tersedia Kapasiti Frekuensi Tersedia Voltage Pin Configuration Error Correction
Berdaftar
Details DDR4 Server Memory (Registered ECC)
8GB, 16GB, 32GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
Kependaman CAS
CL15-17 (depending on frequency)
Faktor Bentuk
DIMM (Modul Memori Dalam Talian Dwi)
Suhu Operasi
0°C hingga 85°C
Keserasian
Server motherboards and X99 chipset motherboards only
Komponen yang serasi
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Papan Induk yang disyorkan
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Pemproses yang Disyorkan
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Konfigurasi Memori
Untuk prestasi yang optimum:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Panduan Pemasangan
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Lepaskan Klip Pengekalan Buka klip pengekalan di kedua-dua hujung slot memori dengan menolaknya ke luar.
5 Jajarkan Modul Memori Selaraskan takuk dalam modul memori dengan kekunci dalam slot memori untuk memastikan orientasi yang betul.
6 Pasang Memori Tekan dengan kuat modul memori sehingga klip pengekalan terpasang secara automatik.
7 Ulang untuk Modul Tambahan Jika memasang berbilang modul, ulangi proses untuk setiap modul, mengikut urutan populasi yang disyorkan papan induk.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Menyelesaikan masalah
Sistem Tidak Akan But Selepas Pemasangan
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Hanya Memori Separa Dikesan
Punca yang mungkin: Memori terduduk tidak betul, populasi memori tidak serasi, slot memori rosak.
Penyelesaian: Letakkan semula modul memori, rujuk manual papan induk untuk susunan populasi yang betul, cuba modul dalam slot yang berbeza.
Ketidakstabilan atau Ranap Sistem
Punca yang mungkin: Tetapan pemasaan memori yang tidak serasi, terlalu panas, kuasa tidak mencukupi.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Nota: Jika masalah berterusan, uji setiap modul memori secara individu untuk mengenal pasti kemungkinan modul rosak. Hubungi sokongan KLLISRE jika anda mengesyaki produk yang rosak.
Maklumat Waranti
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Untuk tuntutan jaminan atau sokongan teknikal, sila hubungi sokongan KLLISRE dengan butiran pembelian anda dan penerangan tentang isu tersebut.
Waranti ini tidak melindungi kerosakan akibat kemalangan, penyalahgunaan, penyalahgunaan, pemasangan yang tidak betul atau pengubahsuaian yang tidak dibenarkan.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokumen / Sumber
 |
KLLISRE Server DDR4 Memory Modules [pdf] Manual Pengguna Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |