Server DDR4-minnemoduler
“
Spesifikasjoner:
- Minnetype: DDR4 Server Memory (Registered
ECC) - Tilgjengelige kapasiteter: 8 GB, 16 GB, 32 GB
- Tilgjengelige frekvenser: 2133MHz, 2400MHz
- Voltage: 1.2V
- Pin-konfigurasjon: 288-pin ECC (Error
Correcting Code) - Feilretting: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
Frekvens) - Formfaktor: DIMM (Dual In-line Memory
modul) - Driftstemperatur: Kompatibilitet
- Kompatibilitet: Server motherboards and X99
chipset motherboards only
Produktbruksinstruksjoner:
Installasjonsveiledning:
- Power Down the System: Slå av serveren
completely and disconnect all power cables from the power
levere. - Åpne serverkabinettet: Remove the server
cover according to the manufacturer’s instructions to access the
hovedkort. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orientering. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
automatisk. - Repeat for Additional Modules: Hvis du installerer
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
Vanlige spørsmål:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
skader.
Q: What processors are recommended for use with this
hukommelse?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
opptreden?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
"`
KLLISRE Server DDR4 Memory
Brukerhåndbok og installasjonsveiledning Last ned som Word-dokument
Produkt overview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Spesifikasjoner
Spesifikasjon Minnetype Tilgjengelig kapasitet Tilgjengelige frekvenser Volumtage Pin Configuration Error Correction
Registrert
Details DDR4 Server Memory (Registered ECC)
8 GB, 16 GB, 32 GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS-latens
CL15-17 (depending on frequency)
Formfaktor
DIMM (dobbel innebygd minnemodul)
Driftstemperatur
0°C til 85°C
Kompatibilitet
Server motherboards and X99 chipset motherboards only
Kompatible komponenter
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Anbefalte hovedkort
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Anbefalte prosessorer
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Minnekonfigurasjon
For optimal ytelse:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Installasjonsveiledning
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Løsne festeklipsene Åpne festeklipsene i begge ender av minnesporet ved å skyve dem utover.
5 Juster minnemodulen Juster hakket i minnemodulen med nøkkelen i minnesporet for å sikre riktig retning.
6 Installer minnet Trykk godt ned på minnemodulen til festeklipsene klikker på plass automatisk.
7 Gjenta for flere moduler Hvis du installerer flere moduler, gjenta prosessen for hver modul, i henhold til hovedkortets anbefalte rekkefølge for innsetting.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Feilsøking
Systemet starter ikke opp etter installasjon
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Bare delvis minne oppdaget
Mulige årsaker: Feilplassert minne, inkompatibelt minne, defekt minnespor.
Løsninger: Sett inn minnemodulene på nytt, se i hovedkortets håndbok for riktig rekkefølge, prøv moduler i forskjellige spor.
Systemustabilitet eller krasj
Mulige årsaker: Inkompatible minnetiminginnstillinger, overoppheting, utilstrekkelig strøm.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Merk: Hvis problemene vedvarer, test hver minnemodul individuelt for å identifisere potensielt defekte moduler. Kontakt KLLISRE-støtte hvis du mistenker et defekt produkt.
Garantiinformasjon
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
For garantikrav eller teknisk støtte, vennligst kontakt KLLISRE støtte med kjøpsdetaljene dine og en beskrivelse av problemet.
Denne garantien dekker ikke skader som følge av ulykker, feil bruk, misbruk, feil installasjon eller uautoriserte modifikasjoner.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokumenter / Ressurser
 |
KLLISRE Server DDR4 Memory Modules [pdfBrukerhåndbok Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |