Server DDR4 Memory Modules
“
Specifiche:
- Tipo di memoria: DDR4 Server Memory (Registered
ECC) - Capacità disponibili: 8 GB, 16 GB, 32 GB
- Frequenze disponibili: 2133 MHz, 2400 MHz
- Voltage: 1.2V
- Configurazione pin: 288-pin ECC (Error
Correcting Code) - Correzione degli errori: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
frequenza) - Fattore di forma: DIMM (Dual In-line Memory
Modulo) - Temperatura di esercizio: Compatibilità
- Compatibilità: Server motherboards and X99
chipset motherboards only
Istruzioni per l'uso del prodotto:
Guida all'installazione:
- Power Down the System: Spegnere il server
completely and disconnect all power cables from the power
fornitura. - Aprire lo chassis del server: Remove the server
cover according to the manufacturer’s instructions to access the
scheda madre. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orientamento. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
automaticamente. - Repeat for Additional Modules: Se si installa
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
Domande frequenti:
Q: Can this memory be used in standard desktop
schede madri?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
danno.
Q: What processors are recommended for use with this
memoria?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
prestazione?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“`
KLLISRE Server DDR4 Memory
Manuale utente e guida all'installazione scaricabili come documento Word
Prodotto finitoview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Specifiche
Specifiche Tipo di memoria Capacità disponibili Frequenze disponibili Voltage Pin Configuration Error Correction
Registrato
Details DDR4 Server Memory (Registered ECC)
8 GB, 16 GB, 32 GB
2133 MHz, 2400 MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
Latenza CAS
CL15-17 (depending on frequency)
Fattore di forma
DIMM (modulo di memoria doppio in linea)
Temperatura di esercizio
da 0°C a 85°C
Compatibilità
Server motherboards and X99 chipset motherboards only
Componenti compatibili
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Schede madri consigliate
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Processori consigliati
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Configurazione della memoria
Per prestazioni ottimali:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Guida all'installazione
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Rilascio delle clip di fissaggio Aprire le clip di fissaggio su entrambe le estremità dello slot di memoria spingendole verso l'esterno.
5 Allineare il modulo di memoria Allineare la tacca nel modulo di memoria con la chiave nello slot di memoria per garantire il corretto orientamento.
6 Installare la memoria Premere con decisione il modulo di memoria finché le clip di fissaggio non scattano automaticamente in posizione.
7 Ripetere la procedura per i moduli aggiuntivi. Se si installano più moduli, ripetere la procedura per ciascun modulo, seguendo la sequenza di popolamento consigliata dalla scheda madre.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Risoluzione dei problemi
Il sistema non si avvia dopo l'installazione
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Rilevata solo memoria parziale
Possibili cause: memoria installata in modo errato, popolamento della memoria incompatibile, slot di memoria difettoso.
Soluzioni: riposizionare i moduli di memoria, consultare il manuale della scheda madre per il corretto ordine di popolamento, provare i moduli in slot diversi.
Instabilità o arresti anomali del sistema
Possibili cause: impostazioni di temporizzazione della memoria incompatibili, surriscaldamento, alimentazione insufficiente.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Nota: se i problemi persistono, testare ogni modulo di memoria singolarmente per identificare eventuali moduli difettosi. Contattare l'assistenza KLLISRE se si sospetta un prodotto difettoso.
Informazioni sulla garanzia
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
For warranty claims or technical support, please contact KLLISRE support with your purchase details and a description of the issue.
La presente garanzia non copre i danni derivanti da incidenti, uso improprio, abuso, installazione non corretta o modifiche non autorizzate.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Documenti / Risorse
 |
KLLISRE Server DDR4 Memory Modules [pdf] Manuale d'uso Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |