Server DDR4 Memory Modules
“
Spesifikaasjes:
- Memory Type: DDR4 Server Memory (Registered
ECC) - Beskikbere kapasiteiten: 8GB, 16GB, 32GB
- Beskikbere frekwinsjes: 2133MHz, 2400MHz
- Voltage: 1.2V
- Pin konfiguraasje: 288-pin ECC (Error
Correcting Code) - Flaterkorreksje: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
frekwinsje) - Form Factor: DIMM (Dual In-line Memory
Module) - Bedriuwstemperatuer: Kompatibiliteit
- Kompatibiliteit: Server motherboards and X99
chipset motherboards only
Produkt gebrûksynstruksjes:
Ynstallaasjegids:
- Power Down the System: Slút de tsjinner ôf
completely and disconnect all power cables from the power
leverje. - Open the Server Chassis: Remove the server
cover according to the manufacturer’s instructions to access the
moederbord. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
oriïntaasje. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
automatysk. - Repeat for Additional Modules: As it ynstallearjen
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
FAQ:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
skea.
Q: What processors are recommended for use with this
oantinken?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
optreden?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
"`
KLLISRE Server DDR4 Memory
Brûkershânlieding en ynstallaasjegids Download as Word-dokumint
Produkt oerview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Spesifikaasjes
Spesifikaasje Geheugentype Beskikbere kapasiteiten Beskikbere frekwinsjes Voltage Pin Configuration Error Correction
Registrearre
Details DDR4 Server Memory (Registered ECC)
8GB, 16GB, 32GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS Latency
CL15-17 (depending on frequency)
Form Factor
DIMM (Dûbele ynline ûnthâldmodule)
Operating Temperatuer
0 °C oant 85 °C
Kompatibiliteit
Server motherboards and X99 chipset motherboards only
Kompatibele komponinten
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Oanrikkemandearre moederborden
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Oanrikkemandearre prosessors
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Unthâld Konfiguraasje
Foar optimale prestaasjes:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Ynstallaasje Guide
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Bewarje de hâldklips los Iepenje de hâldklips oan beide úteinen fan 'e ûnthâldslot troch se nei bûten te drukken.
5 Rjochtsje de ûnthâldmodule út Rjochtsje de ynkeping yn 'e ûnthâldmodule út mei de kaai yn 'e ûnthâldslot om de juste oriïntaasje te garandearjen.
6 Ynstallearje it ûnthâld Druk stevich op 'e ûnthâldmodule oant de hâldklips automatysk op har plak klikke.
7 Werhelje foar ekstra modules As jo meardere modules ynstallearje, werhelje it proses foar elke module, folgje de oanrikkemandearre ynfollingssekwinsje fan it moederbord.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Troubleshooting
Systeem sil net starte nei ynstallaasje
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Allinnich diels ûnthâld ûntdutsen
Mooglike oarsaken: Ferkeard pleatst ûnthâld, ynkompatibele ûnthâldpopulaasje, defekt ûnthâldslot.
Oplossingen: Plak ûnthâldmodules opnij, rieplachtsje de hantlieding fan it moederbord foar de juste folchoarder, besykje modules yn ferskate slots.
Systeemynstabiliteit of crashes
Mooglike oarsaken: Ynkompatibele ûnthâldtimingynstellingen, oerferhitting, ûnfoldwaande stroom.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Opmerking: As de problemen oanhâlde, test dan elke ûnthâldmodule yndividueel om mooglike defekte modules te identifisearjen. Nim kontakt op mei KLLISRE-stipe as jo in defekt produkt fermoedzje.
Warranty Information
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Foar garânsjeclaims of technyske stipe, nim dan kontakt op mei KLLISRE-stipe mei jo oankeapgegevens en in beskriuwing fan it probleem.
Dizze garânsje dekt gjin skea dy't ûntstiet troch ûngelokken, misbrûk, misbrûk, ferkearde ynstallaasje of net-autorisearre oanpassingen.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokuminten / Resources
 |
KLLISRE Server DDR4 Memory Modules [pdf] Brûkershânlieding Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |