Server DDR4 Memory Modules
“
Tehnični podatki:
- Vrsta pomnilnika: DDR4 Server Memory (Registered
ECC) - Razpoložljive kapacitete: 8 GB, 16 GB, 32 GB
- Razpoložljive frekvence: 2133MHz, 2400MHz
- voltage: 1.2 V
- Pin konfiguracija: 288-pin ECC (Error
Correcting Code) - Popravek napake: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
pogostost) - Faktor oblike: DIMM (Dual In-line Memory
modul) - Delovna temperatura: Združljivost
- Združljivost: Server motherboards and X99
chipset motherboards only
Navodila za uporabo izdelka:
Navodila za namestitev:
- Power Down the System: Zaustavite strežnik
completely and disconnect all power cables from the power
ponudba. - Odprite ohišje strežnika: Remove the server
cover according to the manufacturer’s instructions to access the
matična plošča. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orientacija. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
samodejno. - Repeat for Additional Modules: Če nameščate
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
pogosta vprašanja:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
poškodbe.
Q: What processors are recommended for use with this
spomin?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
izvedba?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“`
KLLISRE Server DDR4 Memory
Uporabniški priročnik in navodila za namestitev Prenesi kot Wordov dokument
Konec izdelkaview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Specifikacije
Specifikacija Vrsta pomnilnika Razpoložljive zmogljivosti Razpoložljive frekvence Volumentage Pin Configuration Error Correction
Registriran
Details DDR4 Server Memory (Registered ECC)
8 GB, 16 GB, 32 GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
Zakasnitev CAS
CL15-17 (depending on frequency)
Faktor oblike
DIMM (dvojni linijski pomnilniški modul)
Delovna temperatura
0°C do 85°C
Združljivost
Server motherboards and X99 chipset motherboards only
Združljive komponente
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Priporočene matične plošče
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Priporočeni procesorji
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Konfiguracija pomnilnika
Za optimalno delovanje:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Navodila za namestitev
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Sprostite zadrževalne sponke Odprite zadrževalne sponke na obeh koncih pomnilniške reže tako, da jih potisnete navzven.
5 Poravnajte pomnilniški modul Poravnajte zarezo v pomnilniškem modulu s ključem v reži za pomnilnik, da zagotovite pravilno orientacijo.
6 Namestite pomnilnik Trdno pritisnite pomnilniški modul, da se zadrževalne sponke samodejno zaskočijo.
7 Ponovite za dodatne module Če nameščate več modulov, postopek ponovite za vsak modul in upoštevajte priporočeno zaporedje nameščanja na matični plošči.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Odpravljanje težav
Sistem se po namestitvi ne zažene
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Zaznan le delni pomnilnik
Možni vzroki: nepravilno nameščen pomnilnik, nezdružljiva pomnilniška zasedba, okvarjena reža za pomnilnik.
Rešitve: Ponovno namestite pomnilniške module, za pravilen vrstni red namestitve glejte priročnik za matično ploščo in poskusite module v različnih režah.
Nestabilnost ali zrušitve sistema
Možni vzroki: Nezdružljive nastavitve časa pomnilnika, pregrevanje, nezadostna moč.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Opomba: Če težave ne izginejo, preizkusite vsak pomnilniški modul posebej, da ugotovite morebitne okvarjene module. Če sumite, da je izdelek okvarjen, se obrnite na podporo KLLISRE.
Informacije o garanciji
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Za uveljavljanje garancije ali tehnično podporo se obrnite na podporo KLLISRE s podatki o nakupu in opisom težave.
Ta garancija ne krije škode, ki nastane zaradi nesreče, napačne uporabe, zlorabe, nepravilne namestitve ali nepooblaščenih sprememb.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokumenti / Viri
 |
KLLISRE Server DDR4 Memory Modules [pdfUporabniški priročnik Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |