Serverio DDR4 atminties moduliai
“
Specifikacijos:
- Atminties tipas: DDR4 Server Memory (Registered
ECC) - Galimi pajėgumai: 8 GB, 16 GB, 32 GB
- Galimi dažniai: 2133MHz, 2400MHz
- ttage: 1.2 V
- Smeigtuko konfigūracija: 288-pin ECC (Error
Correcting Code) - Klaidų taisymas: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
dažnis) - Formos faktorius: DIMM (Dual In-line Memory
modulis) - Darbinė temperatūra: Suderinamumas
- Suderinamumas: Server motherboards and X99
chipset motherboards only
Produkto naudojimo instrukcijos:
Diegimo vadovas:
- Power Down the System: Išjunkite serverį
completely and disconnect all power cables from the power
tiekimas. - Atidarykite serverio korpusą: Remove the server
cover according to the manufacturer’s instructions to access the
pagrindinė plokštė. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orientacija. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
automatiškai. - Repeat for Additional Modules: Jei diegiate
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
DUK:
Q: Can this memory be used in standard desktop
motherboards?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
žalą.
Q: What processors are recommended for use with this
atmintis?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
spektaklis?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“`
KLLISRE Server DDR4 Memory
Naudotojo vadovas ir diegimo vadovas Atsisiųsti kaip „Word“ dokumentą
Produktas baigtasview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Specifikacijos
Specifikacija Atminties tipas Galimos talpos Galimi dažniai Vol.tage Pin Configuration Error Correction
Registruotas
Details DDR4 Server Memory (Registered ECC)
8 GB, 16 GB, 32 GB
2133MHz, 2400MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS delsa
CL15-17 (depending on frequency)
Formos faktorius
DIMM (dvigubos eilutės atminties modulis)
Darbinė temperatūra
0°C iki 85°C
Suderinamumas
Server motherboards and X99 chipset motherboards only
Suderinami komponentai
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Rekomenduojamos pagrindinės plokštės
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Rekomenduojami procesoriai
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Atminties konfigūracija
Optimaliam našumui:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Diegimo vadovas
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Atlaisvinkite tvirtinimo spaustukus. Atidarykite tvirtinimo spaustukus abiejuose atminties lizdo galuose, pastumdami juos į išorę.
5 Sulygiuokite atminties modulį. Sulygiuokite atminties modulio įpjovą su atminties lizdo rakteliu, kad užtikrintumėte tinkamą orientaciją.
6 Įdiekite atmintį. Tvirtai spauskite atminties modulį žemyn, kol laikikliai automatiškai užsifiksuos savo vietoje.
7 Pakartokite su kitais moduliais. Jei diegiate kelis modulius, pakartokite procesą su kiekvienu moduliu, laikydamiesi pagrindinės plokštės rekomenduojamos įdėjimo sekos.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Trikčių šalinimas
Sistema nepaleidžiama po įdiegimo
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Aptikta tik dalinė atmintis
Galimos priežastys: netinkamai įdėta atmintis, nesuderinama atminties populiacija, sugedęs atminties lizdas.
Sprendimai: Iš naujo įstatykite atminties modulius, tinkamos įdėjimo tvarkos ieškokite pagrindinės plokštės vadove, išbandykite modulius skirtinguose lizduose.
Sistemos nestabilumas arba gedimai
Galimos priežastys: nesuderinami atminties laiko nustatymai, perkaitimas, nepakankama galia.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Pastaba: jei problemos išlieka, patikrinkite kiekvieną atminties modulį atskirai, kad nustatytumėte galimus gedimus. Jei įtariate, kad produktas yra brokuotas, susisiekite su KLLISRE palaikymo tarnyba.
Informacija apie garantiją
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Dėl garantijos pretenzijų ar techninės pagalbos susisiekite su KLLISRE palaikymo tarnyba, pateikite pirkimo informaciją ir problemos aprašymą.
Ši garantija netaikoma žalai, atsiradusiai dėl nelaimingo atsitikimo, netinkamo naudojimo, piktnaudžiavimo, netinkamo įrengimo ar neleistinų modifikacijų.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokumentai / Ištekliai
 |
KLLISRE Server DDR4 Memory Modules [pdf] Naudotojo vadovas Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |