MOEKETSI MOSEBETSI
Lihlahisoa tsa Longo tsa Bluetooth LBT-1.DO1
Mojule oa tlhahiso ea Bluetooth Mesh Relay
Phetolelo ea 2
LBT-1.DO1 Bluetooth Mesh Relay Output Module
Maemo, likhothaletso, melaoana le lipehelo tsa naha eo lisebelisoa li tla sebetsa ho eona, li tlameha ho nahanoa ha ho ntse ho raloa le ho theha lisebelisoa tsa motlakase. Sebetsa ho 100 .. Marang-rang a 240 V AC a lumelloa ho basebetsi ba lumelletsoeng feela.
TLHOKOMELISO EA KOTSI: Lisebelisoa kapa li-module li tlameha ho sireletsoa mongobo, litšila le tšenyo nakong ea lipalangoang, polokelo le ts'ebetso.
TLHOKOMELISO EA TLHOKOMELISO: Bakeng sa li-module tsohle LBT-1 - haeba ho se na liphetoho tse etsoang 'me li hokahantsoe ka nepo ke basebetsi ba lumelletsoeng - ho nahanoa ka matla a holimo a lumelletsoeng a ho hokahanya, tiisetso ea likhoeli tse 24 e sebetsa ho tloha ka letsatsi la thekiso ho isa ho moreki oa ho qetela, empa ha ho joalo. ho feta likhoeli tse 36 kamora ho pepa ho tsoa ho Smarteh. Haeba ho na le likopo ka nako ea tiisetso, tse thehiloeng ho se sebetse hantle ha thepa moetsi o fana ka phetisetso ea mahala. Mokhoa oa ho khutlisa module o sa sebetseng hantle, hammoho le tlhaloso, o ka hlophisoa le moemeli oa rona ea lumelletsoeng. Warranty ha e kenyeletse tšenyo e bakoang ke lipalangoang kapa ka lebaka la melaoana e lumellanang e sa nahanoang ea naha, moo module e kenngoa teng.
Sesebediswa sena se tlameha ho hokelwa ka nepo ke sekema sa kgokelo se fanoeng bukeng ena. Ho se hokahane ho ka baka tšenyo ea sesebelisoa, mollo kapa kotsi ea motho.
Voltage ka sesebelisoa e ka baka ts'okelo ea motlakase mme e ka baka kotsi kapa lefu.
LE KA mohla U SE KE UA SEBELETSA SEHLAHISO ENA!
Sesebelisoa sena ha sea lokela ho kenngoa lits'ebetsong tsa bohlokoa bophelong (mohlala, lisebelisoa tsa bongaka, lifofane, joalo-joalo).
Haeba sesebelisoa se sebelisoa ka mokhoa o sa boleloang ke moetsi, tekanyo ea tšireletso e fanoeng ke thepa e ka 'na ea senyeha.
Lisebelisoa tsa motlakase le tsa elektroniki tse litšila (WEEE) li tlameha ho bokelloa ka thoko!
Lisebelisoa tsa LBT-1 li ntlafatsoa ho latela litekanyetso tse latelang:
- EMC: EN 303 446-1
- LVD: EN 60669-2-1
Smarteh doo e sebetsa leano la nts'etsopele e tsoelang pele.
Ka hona re na le tokelo ea ho etsa liphetoho le lintlafatso ho efe kapa efe ea lihlahisoa tse hlalositsoeng bukeng ena ntle le tsebiso pele.
MOHLAHLISI:
SMARTEH doo
Poljubinj 114
5220 Tolmin
Slovenia
TS'ELISO TS'OANELO
| LED | Diode e khanyang e khanyang |
| PLC | Selaoli sa Monahano se Reriloeng |
| PC | K'homphieutha ea Motho |
| Op Code | Khoutu ea Khetho ea Molaetsa |
TLHALOSO
LBT-1.DO1 Bluetooth Mesh relay output module e etselitsoe ho sebelisoa e le relay digital output module e nang le RMS current le vol.tagmonyetla oa ho lekanya. Mojule o ka sebetsa ka mefuta e mengata e fapaneng ea DC le AC voltages. E ka behoa ka har'a lebokose le kenyang bophara ba 60mm ka hona e ka sebelisoa bakeng sa ho bulela le ho tima phallo ea motlakase.tage ea li-sockets tse tloaelehileng tsa lebota la motlakase. E ka boela ea behoa ka har'a mabone, ka har'a lisebelisoa tse fapaneng tsa motlakase le lisebelisoa ho bulela le ho tima matla a bona a matlatage. Kenyelletso e eketsehileng ea switch e fanoe ho ba le monyetla oa ho bulela le ho tima mojule relay.
LBT-1.DO1 Bluetooth Mesh relay output module e ka boela ea hokeloa haufi le leseli ho wiring ea setso ea motlakase 115/230 VAC bakeng sa lehalima. Leseli le kopantsoeng le relay ea LBT-1.DO1 le ka khangoa le ho tima ka li-switches tse teng tsa mabone. Mojule o khona ho bona phallo ea matla a motlakasetage theoha ha switjha e tobetsoa. Borokho ba mohala bothateng ba ho qetela pele ho mojule oa phepelo ea LBT-1.DO1 o lokela ho kengoa ka mehala joalo ka ha ho bonts'itsoe ho Setšoantšo sa 4. Le hoja LBT-1.DO1 e le Bluetooth Mesh module, tlhahiso ea relay e ka boela ea buloa le ho tima ka ho sebelisa puisano ea Bluetooth Mesh. . Ka nako e ts'oanang relay RMS hona joale le voltage ka romelloa ka puisano ea Bluetooth Mesh.
LBT-1.DO1 Bluetooth Mesh relay output module e ka sebetsa feela ka Smarteh LBT-1.GWx Modbus RTU Bluetooth Mesh heke e hoketsoeng marangrang a tšoanang a Bluetooth Mesh. LBT-1.GWx Modbus RTU gateway e hokahane le sesebelisoa se seholo sa taolo e le Smarteh LPC-3.GOT.012 7″ PLC based Touch panel, leha e le efe PLC kapa PC leha e le efe e nang le puisano ea Modbus RTU. Ntle le lisebelisoa tsa Smarteh Bluetooth Mesh, lisebelisoa tse ling tse tloaelehileng tsa Bluetooth Mesh li ka kopanngoa le marang-rang a boletsoeng ka holimo a Bluetooth Mesh. Ho ka fanoa ka lisebelisoa tse fetang lekholo tsa Bluetooth Mesh 'me li ka sebetsa ho netweke e le 'ngoe ea Bluetooth Mesh.
LIKAROLOANA
Lethathamo la 1: Lintlha tsa tekheniki
Tekanyetso ea puisano: Bluetooth Mesh ke protocol ea mesh e nang le matla a tlase 'me e lumella lisebelisoa ho ea ho sesebelisoa le sesebelisoa ho laola puisano ea sesebelisoa. Maqhubu a seea-le-moea: 2.4 GHz
Sebaka sa seea-le-moea bakeng sa khokahanyo e tobileng: <30m, ho itšetlehile ka kopo le mohaho.
Ka ho sebelisa topology ea Bluetooth Mesh, ho ka fihleloa libaka tse kholo haholo.
Phepelo ea matla: 11.5 .. 13.5 V DC kapa 90 .. 264 V AC, 50/60Hz
Mocheso oa tikoloho: 0 .. 40 °C
Mocheso oa polokelo: -20 .. 60 °C
Matšoao a boemo: LED e khubelu le e tala
Relay tlhahiso e nang le boima bo phahameng ba ho hanyetsa hona joale 4 A AC / DC
RMS ea hona joale le voltagtekanyo ea e, tekanyo ea tšebeliso ea matla
Mohala oa phepelo ea motlakase o fetola tlhahiso ea dijithale, o sebetsang ka 90 .. 264 V AC phepelo ea motlakase voltage
Fetola tlhahiso ea dijithale
Ho hlongoa ka lebokoseng le phahamisang
TS'EBETSO
LBT-1.DO1 Bluetooth Mesh Relay output module e ka sebetsa feela le Smarteh LBT-1.GWx Modbus RTU Bluetooth Mesh gateway ha e ntse e fanoa ka marang-rang a tšoanang a Bluetooth Mesh.
4.1.Mesebetsi e meng ea mojule oa relay
- Reset ea fektheri: Ts'ebetso ena e tla hlakola liparamente tsohle tsa marang-rang tsa Bluetooth Mesh tse bolokiloeng ho LBT-1.DO1 relay output module 'me e tla khutlisetsa maemo a lenaneo la pele, le loketse ho fana. Sheba Lethathamo la 5 ho fumana lintlha tse ling.
4.2.Mekhahlelo ea ts'ebetso
LBT-1.DO1 Bluetooth Mesh Relay output module e amohela sehlopha sa likhoutu tsa ts'ebetso joalo ka ha ho boletsoe ka tlase ho litafole 2 ho isa ho 4.
LBT-1.DO1 Bluetooth Mesh relay output module e buisana le sesebelisoa se seholo sa taolo e le Smarteh LPC-3.GOT.012 kapa se tšoanang ka Smarteh LBT-1.GWx Modbus RTU Bluetooth Mesh gateway. Puisano eohle pakeng tsa sesebelisoa se seholo sa taolo e etsoa ka ho sebelisa puisano ea Modbus RTU. Lintlha tsa tlhophiso ea node ea Bluetooth Mesh li lokela ho bonoa ka ho sebelisa sesebelisoa sa ho fana ka marang-rang.
Letlapa la 2: 4xxxx, Ho ts'oara lirekoto, Modbus RTU ho Bluetooth Mesh heke
| Reg. | Lebitso | Tlhaloso | E tala → Lintlha tsa boenjiniere |
| 10 | Phetha taelo | Phetha taelo ea Bala le/kapa Ngola ka ho toggling bit | BitO toggle → Ngola Bit1 toggle → Bala |
| 11 | Aterese ea moo u eang | Aterese ea sebaka seo u eang ho sona. E ka ba unicast, sehlopha kapa aterese ea sebele | 0 .. 65535 → 0 .. 65535 |
| 12 | Element index* | Ho romella index ea likarolo tsa node | 0 .. 65535→ 0 .. 65535 |
| 13 | ID ea morekisi* | ID ea morekisi ea mofuta oa ho romella node | 0 .. 65535 → 0 .. 65535 |
| 14 | ID ea mohlala' | ID ea mohlala ea mofuta oa node ea ho romella | 0 .. 65535 → 0 .. 65535 |
| 16 | Virtual address index' | Lenane la sebaka sa UUID sa Leibole | 0 .. 65535 → 0 .. 65535 |
| 17 | Lenane la senotlolo sa kopo* | Lenane la senotlolo sa kopo le sebelisitsoeng | 0 .. 65535 → 0 .. 65535 |
| 18 | Khetho ea khoutu” | Sheba tafoleng ea khetho ea khoutu | 0 .. 63 → 0 .. 63 |
| 19 | Payload byte bolelele” | Sheba tafoleng ea khetho ea khoutu | 1 .. 10 → 1 .. 10 byte |
| 20 | Lentsoe la ho lefa[Kapa | Sheba tafoleng ea khetho ea khoutu | 0 .. 65535 → 0 .. 65535 |
| 21 | Lentsoe la ho lefa[1]” | Sheba tafoleng ea khetho ea khoutu | 0 .. 65535 → 0 .. 65535 |
| 22 | Lentsoe la ho lefa[2]” | Sheba tafoleng ea khetho ea khoutu | 0 .. 65535 → 0 .. 65535 |
| 23 | Lentsoe la ho lefa[3]” | Sheba tafoleng ea khetho ea khoutu | 0 .. 65535 → 0 .. 65535 |
| 24 | Lentsoe la ho lefa[4]” | Sheba tafoleng ea khetho ea khoutu | 0 .. 65535 → 0 .. 65535 |
* E shebiloe ho sesebelisoa sa ho fana ka marang-rang
** Litekanyetso tse hlalositsoeng ke mosebelisi, bua ka tafole ea khoutu ea khetho
Letlapa la 3: 3xxxx, lirekoto tsa ho kenya, Modbus RTU ho Bluetooth Mesh heke
| Reg. | Lebitso | Tlhaloso | E tala → Lintlha tsa boenjiniere |
| 10 | Melaetsa e ntse e emetse | Nomoro ea melaetsa e emetseng ho fumana buffer | 1 .. 10 → 1 .. 10 |
| 11 | Aterese ea moo u eang | Aterese ea sebaka seo u eang ho sona. E ka ba unicast, sehlopha kapa aterese ea sebele | 0 .. 65535 → 0 .. 65535 |
| 12 | Lenane la lintlha | Ho romella index ea likarolo tsa node | 0 .. 65535 → 0 .. 65535 |
| 13 | ID ea morekisi | ID ea morekisi ea mofuta oa ho romella node | 0 .. 65535 → 0 .. 65535 |
| 14 | Boitsebiso ba Model | ID ea mohlala ea mofuta oa node ea ho romella | 0 .. 65535 →0 .. 65535 |
| 15 | Aterese ea mohloli | Aterese ea Unicast ea mofuta oa node e rometseng molaetsa | 0 .. 65535 → 0 .. 65535 |
| 16 | index ea liaterese ea Virtual | Lenane la sebaka sa UUID sa Leibole | 0 .. 65535 → 0 .. 65535 |
| 17 | Lenane la senotlolo sa kopo | Lenane la senotlolo sa kopo le sebelisitsoeng | 0 .. 65535 →0 .. 65535 |
| 18 | Khetho ea khoutu | Sheba tafoleng ea khetho ea khoutu | 0 .. 63 → 0 .. 63 |
| 19 | Bolelele ba moputso | Sheba tafoleng ea khetho ea khoutu | 1 .. 10 → 1 .. 10 byte |
| 20 | Lentsoe la ho lefa[0] | Sheba tafoleng ea khetho ea khoutu | 0 .. 65535 → 0 .. 65535 |
| 21 | Lentsoe la ho lefa[1] | Sheba tafoleng ea khetho ea khoutu | 0 .. 65535 →0 .. 65535 |
| 22 | Lentsoe la ho lefa[2] | Sheba tafoleng ea khetho ea khoutu | 0 .. 65535 → 0 .. 65535 |
| 23 | Lentsoe la ho lefa[3] | Sheba tafoleng ea khetho ea khoutu | 0 .. 65535 → 0 .. 65535 |
| 24 | Lentsoe la ho lefa[4] | Sheba tafoleng ea khetho ea khoutu | 0 .. 65535 → 0 .. 65535 |
Letlapa la 4: Relay output LBT-1.DO1 mekhoa ea khetho
| Khetho ea khoutu | Lebitso | Tlhaloso | E tala → Lintlha tsa boenjiniere |
| 1 | Boemo ba mofuta oa FW | FUMY/Lire VOIVO:1state: | 0.. 65535 → 0.. 65535 |
| 2 | Mokhoa oa ts'ebetso o setiloe | Node opoomon mode khetha | 0 → Ha e sebelisoe 1 → Ha e sebelisoe 2 → Ha e sebelisoe 3 → Ha e sebelisoe 4 → Seta bocha 5 → Khutlisa fektheri |
| 9 | Taelo ea nako ea ho tsoha | Laela ho seta nako ea nako eo sesebelisoa se tsohang le ho romela data mabapi le hona joale le voltage boemo | 0 .. 65535 → 0 .. 65535 s |
| 10 | Boemo ba nako ea ho tsoha | Boemo ba nako eo sesebediswa se tsohang mme se romela data mabapi le tsa hona jwale le voltage boemo | 0 .. 65535 → 0 .. 65535 s |
| 18 | Moqtage boemo | Keletso voltage RMS boleng | 0 .. 65535 → 0 .. 6553.5 V |
| 19 | Boemo ba hajoale | Laola boleng ba hona joale ba RMS | 0 .. 65535 → 0 .. 65.535 A |
| 40 | Digital out taelo | Relay taelo ea tlhahiso | 0 → TIMA 1 → TSOELA PELE |
| 41 | Boemo ba ho tsoa ka dijithale | Boemo ba tlhahiso ea relay | 0 → TIMA 1 → TSOELA PELE |
| 53 | PS line switjha etsa hore taelo | Taelo ea ho lumella ho kenya lithapo tsa phepelo ea motlakase | 0 → Tlosa Ke → Lumella |
| 54 | PS line switjha nolofalletsa boemo | Lumella boemo ba ho kenya lithapo tsa phepelo ea motlakase | 0 → E holofetse 1 → E lumelletsoe |
| 55 | Fetolela SW nolofalletsa taelo | Taelo ea ho nolofalletsa ho kenya SW switch | 0 → Tlosa 1 → Thusa |
| 56 | Fetolela SW lumella boemo | Lumella boemo ba ho kenya SW switch | 0 → E holofetse 1 → E lumelletsoe |
KEKETSO
5.1.Sekema sa kgokelo
Setšoantšo sa 4: Exampleano la khokahano
Setšoantšo sa 5: LBT-1.DO1 module
Letlapa la 5: Lintho tse kenang, tse hlahisoang le li-LED
| K1.1 | N1 | Load output/ Ketso ya ho jara: e sa nke lehlakore kapa e mpe |
| k1.2 | N | Kenyelletso ea phepelo ea motlakase: ho se nke lehlakore kapa hampe (-) |
| k1.3 | SW | Phetoho ea ho fetola: mohala, 90 .. 264 V AC, 11.5 .. 30 V DC |
| K1.4 | L1 | Load output/ Ketso ya ho jara: mola kapa tse ntle |
| K1.5 | L | Kenyelletso ea phepelo ea motlakase: mohala kapa o nepahetseng (+), 90 .. 264 V AC kapa 11.5 .. 30 V DC |
| LED1: khubelu | Phoso | 2x blink ka hare ho nako ea 5 s = marang-rang / motsoalle ea lahlehileng 3x blink ka hare ho nako ea 5 s = node e sa reroang |
| LED2: tala | Boemo | 1x blink = ts'ebetso e tloaelehileng. Hape ke karabelo bakeng sa khokahano ea lehlaka ea S1, ha e kentsoe ka makenete. |
| S1 | Lehlakana | Lebitso la ho seta mode Ka har'a fensetere ea nako ea 5, etsa palo e tsamaellanang ea li-swipes ka nako e seng ka tlase ho 200 ms ka makenete e sa feleng haufi le sebaka sa ho ikopanya le lehlaka la S1. Ho latela ts'ebetso ea sensor ea fensetere kapa mokhoa o tla hlophisoa: Nomoro ea Ts'ebetso ea swipes |
5.2.Litaelo tsa ho phahamisa
Setšoantšo sa 6: Litekanyo tsa bolulo
Litekanyo ka limilimithara.
Setšoantšo sa 7: Ho hlongoa ka lebokoseng le phahamisoang
- Ho tima phepelo ea motlakase ea mantlha.
- Ha o kenya mojule ka har'a lebokose la flush mounting, qala ka ho hlahloba hore na lebokose le kenyang flush le tebile ho lekana.
Haeba ho hlokahala, ka kopo sebelisa sekhechana se eketsehileng lipakeng tsa lebokose le soketeng kapa ikopanye le moetsi bakeng sa lintlha tse ling. - Phahamisa mochine sebakeng se fanoeng 'me u kenye mochine ho latela morero oa ho hokahanya ho Setšoantšo sa 4. Ha o hokela mochine ho mohala oa motlakase oa setso bakeng sa ho bonesa, ka kopo etsa bonnete ba hore o kentse borokho ka switch ea ho qetela pele ho LBT- 1.DO5 module joalokaha ho bontšitsoe setšoantšong sa 4.
- Ho bulela phepelo e kholo ea motlakase.
- Kamora metsotsoana e 'maloa e Tala kapa e khubelu ea LED e qala ho panya, ka kopo bona chate e kaholimo bakeng sa lintlha.
- Haeba module e sa fanoa ka LED e khubelu e tla benya 3x, mokhoa oa ho fana o tlameha ho qalisoa. Ikopanye le moetsi bakeng sa lintlha tse ling*.
- Hang ha tokisetso e felile, mojule o tla tsoelapele ka mokhoa o tloaelehileng oa ts'ebetso 'me sena se tla bontšoa e le Green LED e panyang hang ka metsotsoana e 10.
Theoha ka tatellano ea morao.
*HLOKOMELA: Lihlahisoa tsa Smarteh Bluetooth Mesh lia eketsoa le ho hokeloa ho netweke ea Bluetooth Mesh ka ho sebelisa tlhophiso e tloaelehileng ea lisebelisoa tsa mohala tse kang nRF Mesh kapa tse ling tse tšoanang.
Ka kopo, ikopanye le moetsi bakeng sa lintlha tse ling.
TS'EBETSO TS'OANELO
LBT-1.DO1 Bluetooth Mesh relay output module e ka fetola matla ho mojaro o hlahisoang o ipapisitse le matla a phano ea matla.tage drop pulse, e ipapisitseng le switch input voltage fetoha kapa e ipapisitse le taelo ea Bluetooth Mash.
6.1.Temoso ea tšitiso
Mehloli e tloaelehileng ea tšitiso e sa batleheng ke lisebelisoa tse hlahisang matšoao a phahameng a maqhubu. Tsena hangata ke likhomphutha, litsamaiso tsa molumo le livideo, li-transformer tsa elektroniki, lisebelisoa tsa motlakase le li-ballast tse fapaneng. Sebaka sa module ea LBT-1.DO1 relay output ho lisebelisoa tse boletsoeng ka holimo e lokela ho ba bonyane 0.5 m kapa ho feta.
TLHOKOMELISO:
- E le ho sireletsa limela, litsamaiso, mechini le marang-rang khahlanong le litšokelo tsa cyber hoa hlokahala ho kenya ts'ebetsong le ho tsoela pele ho boloka mehopolo ea ts'ireletso ea morao-rao.
- U na le boikarabello ba ho thibela phihlello e sa lumelloeng ea limela tsa hau, lits'ebetso, mechini le marang-rang 'me li lumelletsoe ho hokeloa Marang-rang feela, ha mehato ea ts'ireletso e kang li-firewall, likarolo tsa marang-rang, joalo-joalo li le teng.
- Re khothaletsa ka matla lintlafatso le tšebeliso ea mofuta oa morao-rao. Tšebeliso ea mofuta o seng o sa tšehetsoe e ka eketsa menyetla ea litšokelo tsa marang-rang.
LIEKETSENG MOKHOPO
Lethathamo la 7: Litlhaloso tsa tekheniki
| Phepelo ea motlakase | 11.5 .. 13.5 V DC 90 .. 264 V AC, 50/60 Hz |
| Fuse | 4 A (T-butle), 250 V |
| Max. tshebediso ya matla | 1.5 W |
| Mojaro voltage | E ts'oanang le phepelo ea motlakase voltage |
| Boholo ba mojaro ba hona joale • (moroalo o hanyetsanang) | 4 A AC/DC |
| Mofuta oa khokahano | Li-connectors tsa mofuta oa Screw bakeng sa terata e khelohileng 0.75 ho 2.5 mm2 |
| Nako ea puisano ea RF | Bonyane 0.5 s |
| Litekanyo (L x W x H) | 53 x 38 x 25 limilimithara |
| Boima ba 'mele | 50 g |
| Mocheso oa tikoloho | 0 .. 40°C |
| Mongobo wa tikoloho | Max. 95%, ha ho condensation |
| Boholo ba bophahamo | 2000 m |
| Boemo ba ho phahamisa | Leha e le efe |
| Mocheso oa lipalangoang le oa polokelo | -20 ho isa ho 60 ° C |
| Tekanyo ea tšilafalo | 2 |
| Ho feta voltagsehlopha | II |
| Lisebelisoa tsa motlakase | Sehlopha sa II (ho kenya lintho habeli) |
| Sehlopha sa tšireletso | IP10 |
* HLOKOMELA: Tlhokomelo e khethehileng e tlameha ho nkuoa haeba ho na le li-contactors, solenoids, kapa meroalo e hohelang maqhubu a phahameng, mohlala, capacitive character load, incandescent l.amps. Litlhaku tse inductive li baka over-voltage spikes ho likhokahano tsa relay ha li tima. Ho eletsoa hore ho sebelisoe li-circuits tsa khatello tse nepahetseng. Meroalo e hulang maqhubu a phahameng a inrush e ka etsa hore tlhahiso ea relay e tlalehe ka nakoana ka holimo ho meeli ea eona e lumelletsoeng, e ka senyang tlhahiso, leha boemo boo bo tsitsitseng bo le ka har'a meeli e lumelletsoeng. Bakeng sa mofuta oo oa mojaro, ho eletsoa ho sebelisa sethibela se nepahetseng sa inrush current.
Lits'oants'o tse matla kapa tse nang le matla li susumetsa likhokahano tsa relay ka ho khutsufatsa nako ea bophelo ba bona ba ho sebetsa kapa li ka qhibilihisa likhokahano ka ho sa feleng. Nahana ka ho sebelisa mofuta o mong oa tlhahiso ea dijithale (mohlala, triac).
MODULE LABELING
Setšoantšo sa 10: Label
Label (sample):
XXX-N.ZZZ.UUU
P/N: AAABBBCCDDDEEE
S/N: SSS-RR-YYXXXXXXXXXXXX
D/C: WW/YY
Tlhaloso ea leibole:
- XXX-N.ZZZ - lebitso le felletseng la sehlahisoa,
• XXX-N – lelapa la sehlahiswa,
• ZZZ.UUU – sehlahisoa, - P/N: AAABBBCCDDDEEE - karolo ea nomoro,
• AAA - khoutu e akaretsang bakeng sa lelapa la sehlahisoa,
• BBB – lebitso le lekgutshwane la sehlahiswa,
• CCDDD – khoutu ya tatelano,
• CC – selemo sa ho bula khoutu,
• DDD – derivation code,
• EEE – khoutu ya mofuta (e boloketswe dintlafatso tsa kamoso tsa HW le/kapa SW), - S/N: SSS-RR-YYXXXXXXXXX - nomoro ea seriale,
• SSS – lebitso le lekgutshwane la sehlahiswa,
• RR – khoutu ya mosebedisi (mokgwa wa teko, mohlala, Smarteh person xxx),
• YY – selemo,
• XXXXXXXXX - nomoro ea hajoale ea stack, - D/C: WW/YY - khoutu ea letsatsi,
• WW – beke le,
• YY - selemo sa tlhahiso.
Ka boikhethelo:
- MAC,
- Matšoao,
- WAMP,
- Tse ding.
LIPHETOHO
Tafole e latelang e hlalosa liphetoho tsohle tsa tokomane.
| Letsatsi | V. | Tlhaloso |
| 26.05.23 | 2 | Reviewed mongolo, litlhaloso tsa fuse le relay. |
| 05.05.23 | 1 | Phetolelo ea pele, e fanoeng e le LBT-1.DO1 relay output module Manual. |
LINTLHA TSEO
E ngotsoe ke SMARTEH doo
Copyright © 2023, SMARTEH doo
Bukana ea Mosebelisi
Phetolelo ea Tokomane: 2
Motšeanong 2023
SMARTEH doo / Poljubinj 114 / 5220 Tolmin / Slovenia / Tel.: +386(0)5 388 44 00 / e-mail: info@smarteh.si / www.smarteh.si
Litokomane / Lisebelisoa
 |
SMARTEH LBT-1.DO1 Bluetooth Mesh Relay Output Module [pdf] Bukana ea Mosebelisi LBT-1.DO1 Bluetooth Mesh Relay Output Module, LBT-1.DO1, Bluetooth Mesh Relay Output Mojule, Relay Output Module, Output Module |