Smart-AVI SM-MST SERIES MST DP KVM e nang le MULTIPLE 4K HDMI Out User Manual
MOEKETSI MOSEBETSI
| SM-MST-2D | 2-Port KVM MST e nang le Dual 4K HDMI Out |
| SM-MST-2Q | 2-Port KVM MST e nang le Quad 4K HDMI Out |
| SM-MST-4D | 4-Port KVM MST e nang le Dual 4K HDMI Out |
| SM-MST-4Q | 4-Port KVM MST e nang le Quad 4K HDMI Out |
Litlhaloso tsa Tekheniki
| VIDEO | ||
| Sebopeho | DisplayPort1.2a | |
| Sesebelisoa sa ho Kenyelletsa | SM-MST-2S | (2) DisplayPort1.2a |
| SM-MST-2D / SM-MST-4S | (4) DisplayPort1.2a | |
| SM-MST-2S | (8) DisplayPort1.2a | |
| Sebopeho sa Output | SM-MST-2S / SM-MST-4S | (2) HDMI |
| SM-MST-2D / SM-MST-4D | (4) HDMI | |
| Qeto | Ho fihla ho 4K (3840 x 2160 @ 30 Hz) | |
| DDC | 5 volts pp (TTL) | |
| Kenyeletso ya Tekatekano | Ka ho iketsa | |
| Kena Bolelele ba Cable | Ho fihla ho 20 ft | |
| Khumo Bolelele ba Cable | Ho fihla ho 20 ft | |
| MUDIO | ||
| Sesebelisoa sa ho Kenyelletsa | (2) 3.5 limilimithara tsa Stereo Audio | |
| Sebopeho sa Output | (1) 3.5 limilimithara tsa Stereo Audio | |
| Tšitiso | 600 ohm | |
| Karabelo ea Khafetsa | Ho tloha ho 20 ho isa ho 20 kHz | |
| Boemo ba lebitso | 0-1.0 V | |
| Mokhoa o Tloaelehileng | Ho hana ho 60 dB | |
| USB | ||
| Khokahano ea ho kenya (TX) | (2) Mofuta oa USB oa B | |
| Sebopeho sa Output (RX) | (2) USB 1.1 Mofuta oa A bakeng sa Lisebelisoa tsa KM
(2) USB 2.0 Mofuta oa A Transparent |
|
| Emulation | USB 1.1 le USB 2.0 e tsamaellana | |
| TAolo | ||
| Phanele e ka pele | Tobetsa Likonopo tse nang le Lipontšo tsa LED | |
| RS-232 | DB9 Mosali - 115200 N,8,1, Ha ho taolo ea phallo | |
| Linotlolo tse chesang | Ka Keyboard | |
| TSE LING | ||
| Adapter ea Matla | Ka ntle 100-240 VAC/ 12VDC2A @ 24 W | |
| Litumello | UL, CE, ROHS e lumellana | |
| Mocheso oa ho sebetsa | +32 ho ea +104°F (0 ho +40°C) | |
| Mocheso oa polokelo | -4 ho 140°F (-20 ho +60°C) | |
| Mongobo | Ho fihla ho 80% (Ha ho Condensation) | |
Ho na le eng ka lebokoseng?
| KAROLO NO. | Q-TY | TLHALOSO |
| Sehlopha sa SM-MST | 1 | 2/4 Port KVM MST e nang le Dual or Quad 4K HDMI Out |
| CC35DB9 | 1 | 3.5mm ho isa ho DB9 Cable (bakeng sa SM-DVN-2S / SM-DVN-2D) |
| PS12V2A | 1 | 12V DC, 2A (bonyane) adaptara ea matla e nang le polarity e ntle ea pini e bohareng. |
| 1 | Bukana ea Mosebelisi |
PELE LE MORAKO
SM-MST-2D Back SM-MST-2Q Back
SM-MST-2D Front SM-MST-2Q Front
SM-MST-2D Back
SM-MST-2D Front
SM-MST-2Q Back
SM-MST-2Q Front
2/4 Port KVM MST e nang le Dual or Quad 4K HDMI Out
KEKETSO
- Netefatsa hore motlakase o timiloe kapa o khaotsoe ho yuniti le likhomphutha.
- Sebelisa thapo ea DisplayPort ho hokela boema-kepe ba tlhahiso ea DisplayPort ho tloha komporong e 'ngoe le e 'ngoe ho ea likoung tse tsamaellanang tsa DP IN tsa yuniti.
- Sebelisa thapo ea USB (Mofuta oa A ho ea ho Mofuta oa B) ho hokela kou ea USB komporong e 'ngoe le e 'ngoe ho likou tsa USB tsa yuniti.
- Hokela thapo ya modumo ya stereo (3.5mm ho ya ho 3.5mm) ka boikgethelo ho hokela tlhahiso ya modumo ya dikhomphutha ho AUDIO IN boemakepe ba yuniti.
- Hokela sebali boema-kepeng ba khomphutha ea HDMI OUT u sebelisa thapo ea HDMI.
- Hokela keyboard ea USB le mouse likoung tse peli tsa khomphutha tsa USB.
- Hokela libui tsa stereo ka boikhethelo boema-kepe ba AUDIO OUT ba yuniti.
- Ka boikhethelo, sebelisa 3.5mm ho DB9 Cable 'me u hokahane le Cable e tloaelehileng ea RS-232 (e sa kenyellelitsoeng) ho hokela komporong ea Serial Control (bakeng sa li-port tse 2 feela)
- Qetellong, matla ho KVM ka ho hokahanya motlakase oa 12VDC ho sehokelo sa matla, ebe o bulela likhomphutha tsohle.
Ela hloko: O ka hokela ho fihlela ho 2 lik'homphieutha ho 2 koung KVM le hokela ho fihlela ho 4 lik'homphieutha ho 4 boema-kepe KVM.
Kemiso (tsoelapele)
EDID ITHUTE
KVM e etselitsoe ho ithuta EDID ea sebali se hokahantsoeng ha se phahama. Ketsahalong ea ho hokahanya sebali se secha ho KVM, ho hlokahala hore ho sebelisoe motlakase hape.
KVM e tla bonts'a mosebelisi mokhoa oa ho ithuta oa EDID ka ho bentša li-LED tsa phanele e ka pele. Boema-kepe bo le bong bo botala le konopo e putsoa ea li-LED li tla qala ho bonesa ka metsotsoana e ka bang 10. Ha li-LED li ema
ho benya, mokhoa oa ho ithuta oa EDID oa etsoa. Haeba KVM e na le boto ea video e fetang e le 'ngoe (joalo ka mehlala ea li-dual-head le quad-head), joale yuniti e tla tsoelapele ho ithuta li-EDID tsa li-monitor tse hokahaneng le ho bonts'a tsoelo-pele ea ts'ebetso ka ho khantša khetho e latelang ea boema-kepe le botala. push konopo blue LEDs ka ho latellana.
Sesebelisoa se tlameha ho hokahanngoa le sehokelo sa tlhahiso ea video se sebakeng sa console se ka morao ho KVM nakong ea ts'ebetso ea ho ithuta ea EDID.
Haeba EDID e baloang ho tsoa ho sebali se hokahantsoeng e ts'oana le EDID e bolokiloeng hona joale ho KVM, mosebetsi oa ho ithuta oa EDID o tla tloloa.
Ts'ebetso ea sistimi
Ho na le mekhoa e meraro ea ho laola SM-MST: Keyboard Hotkeys, RS-232 Serial Commands, le Front Panel Buttons. Mefuta eohle ea taolo e tla lumella mosebelisi ho beha litlhophiso tseo a li batlang.
taolo ea phanele e ka pele
Ho fetohela boema-kepeng ba ho kenya, tobetsa feela konopo e ka pele-pele ea KVM. Haeba sebaka sa ho kenya se khethiloe, LED ea kou eo e tla bulela.
Tšoara konopo ea Front Panel metsotsoana e 3 ho qobella ho ithuta EDID.
hotkey le taolo ea seriale ea rs232
SM-MST e ka boela ea laoloa ka litaelo tsa RS-232. Ho sebelisa litaelo tsena, o tlameha ho sebelisa HyperTerminal kapa sesebelisoa se seng sa terminal. Litlhophiso tsa khokahano ke tse latelang:
Baudrate 115200; Lintlha tsa data 8; Parity Ha ho letho; Emisa Bits 1; Taolo ea Phallo Ha ho letho. Hang ha u se u hokahane le SM-MST ka Serial, u tla bona tlhahisoleseding ea SM-MST ha sesebelisoa se qala.
Litaelo tse latelang li ka sebelisoa bakeng sa RS-232 ka li-hotkeys tse fumanehang tsa keyboard:
| TAELO TLHALOSO | HOTEKA | RS-232 TAELO |
| Fetola lisebelisoa tsohle tsa USB le Video e kholo | [CTRL][CTRL] m [kou #] [ENTER] | //m [kou #] [ENTER] |
| Fetola Audio Feela | [CTRL][CTRL] a [kou #] [ENTER] | //a [kou #] [ENTER] |
| Fetola KM Feela | [CTRL][CTRL] c [kou #] [ENTER] | //c [kou #] [ENTER] |
| Fetola USB Feela | [CTRL][CTRL] u [kou #] [ENTER] | //u [kou #] [ENTER] |
| Hotplug | [CTRL][CTRL] h [KENA] | //h [KENA] |
| Khutlisa Li-Defaults tsa Feme | [CTRL][CTRL] f [KENA] | //f [KENA] |
| Khutlisa Software | [CTRL][CTRL] r [KENA] | //r [KENA] |
| Potso ea Boemo | N/A | //?? [KENYA] |
Lithahasello tsa hotkey tse ikhethileng
Basebedisi ba khona ho iketsetsa linotlolo tse hlahisang li-Hotkeys. Sehlomathiso sa kamehla bakeng sa ts'ebetso ea senotlolo se chesang ho keyboard ke Ctrl + Ctrl. Mosebetsi oa trigger o ka sebelisoa ho fetolela linotlolo tse latelang:
Ctrl (Ka ho le letšehali / ka ho le letona), Alt, Shift (Ka ho le letšehali / ka ho le letona), Senotlolo sa litlhaku tse kholo, Moqolo Lock, F1-F12
TSA VIEW HOTKEY TRIGGER SEBAKA
Sebelisa taelo ea RS-232: / + / + ? + ? + Kena ho view HotKey Trigger ea hona joale Ho tsosolosa Hotkey Trigger sebelisa taelo ea "Factory Defaults".
HO FETOLA SEBAKA SA HOTKEY TRIGGER
HotKey + HotKey + x + [hotkey e lakatsehang]
ExampLe: Haeba basebelisi ba hona joale ba Hotkey trigger ke Shift le batla ho fetola ho Moqolo Lock, mosebelisi o tla thaepa Shift + Shift + x + Moqolo Lock
| # | BOEMO | TLHALOSO |
| 1 | E tima | Monitor ha e ea hokahanngoa |
| 2 | On | Monitor e hokahane |
| 3 | Ho benya | Bothata ba EDID - Ithute EDID ho lokisa bothata |
Boitšoaro ba Led
Sebopeho sa Console ea mosebelisi - Bontša LED:
| # | BOEMO | TLHALOSO |
| 1 | E tima | Boema-kepe bo sa khethoang |
| 2 | On | Kou e khethiloeng |
| 3 | Ho benya | Thuto ea EDID e ntse e tsoela pele |
Front Panel - Port Selection LED's:
EDID Ithute - Front Panel LED's:
Li-LED tsohle li buletsoe motsotsoana o le mong. Joale:
- Li-LED tsa Port 1 li tla benya ho fihlela qetellong ea ts'ebetso.
- Port 2 LED's e tla khanya ho fihlela qetellong ea ts'ebetso haeba boto ea bobeli ea video e le teng (Dual-head KVM)
Ho batle phoso
Ha ho Matla
- Etsa bonnete ba hore adaptara ea motlakase e hoketsoe ka mokhoa o sireletsehileng ho sehokelo sa motlakase sa yuniti.
- Sheba bophahamo ba modumotage ea phepelo ea motlakase le ho etsa bonnete ba hore voltagboleng ba e ke hoo e ka bang 12VDC.
- Fetola phepelo ea motlakase.
Ha ho Video
- Sheba hore na lithapo tsohle tsa video li hokahane hantle.
- Hokela komporo ka kotloloho ho sebali ho netefatsa hore sebali le komporo ea hau li sebetsa hantle.
- Qala lik'homphieutha bocha.
Keyboard ha e sebetse
- Sheba hore na keyboard e hokahane hantle le yuniti.
- Sheba hore na lithapo tsa USB tse hokahanyang yuniti le likhomphutha li hokahane hantle.
- Leka ho hokela USB komporong ho koung e 'ngoe.
- Etsa bonnete ba hore keyboard e sebetsa ha e hokahane ka kotloloho khomphuteng.
- Tlosa keyboard.
Peba ha e sebetse
- Sheba hore na mouse e hokahane hantle le yuniti.
- Leka ho hokela USB komporong ho koung e 'ngoe.
- Etsa bonnete ba hore mouse e sebetsa ha e hokahane ka kotloloho khomphuteng.
- Tlosa mouse.
Ha ho Audio
- Sheba hore na lithapo tsohle tsa molumo li hokahane hantle.
- Hokela libui ka ho toba khomphuteng ho netefatsa hore libui le molumo oa k'homphieutha li sebetsa hantle.
- Lekola litlhophiso tsa molumo komporong 'me u netefatse hore tlhahiso ea molumo e tsoa ka libui.
Tšehetso ea tekheniki
Bakeng sa lipotso mabapi le sehlahisoa, lipotso tsa tiisetso, kapa lipotso tsa tekheniki, ka kopo ikopanye info@smartavi.com.
Setatemente sa tiisetso e fokolang
A. Boholo ba tiisetso e lekanyelitsoeng
SmartAVI, Inc. e fana ka tiisetso ho basebelisi ba ho qetela hore sehlahisoa sa SmartAVI se boletsoeng ka holimo se ke ke sa hlola se e-ba le liphoso tsa thepa le moetso oa nako ea selemo se le seng, e leng nako e qalang ka letsatsi leo moreki a se rekileng. Moreki o ikarabella ho boloka bopaki ba letsatsi la theko.
Tiisetso e lekanyelitsoeng ea SmartAVI e akaretsa feela liphoso tse hlahang ka lebaka la tšebeliso e tloaelehileng ea sehlahisoa, 'me ha e sebetse ho efe kapa efe:
- Tlhokomelo e sa lokang kapa e sa lekaneng kapa diphetoho
- Ts'ebetso e kantle ho litekanyetso tsa sehlahisoa
- Tlhekefetso ea mechine le ho pepesehela maemo a matla
Haeba SmartAVI e fumana, nakong ea tiisetso e loketseng, tsebiso ea bofokoli, SmartAVI e tla ka boikhethelo ba eona ho nkela kapa ho lokisa sehlahisoa se nang le bothata. Haeba SmartAVI e sa khone ho khutlisa kapa ho lokisa sehlahisoa se nang le bothata bo koahetsoeng ke waranti ea SmartAVI ka nako e loketseng, SmartAVI e tla khutlisa litšenyehelo tsa sehlahisoa.
SmartAVI ha e na tlameho ea ho lokisa, ho khutlisa kapa ho khutlisa yuniti ho fihlela moreki a khutlisetsa sehlahisoa se nang le bothata ho SmartAVI.
Sehlahisoa sefe kapa sefe se ka nkelang sebaka se secha kapa sa tšoana le se secha, ha feela se na le tšebetso e lekanang le ea sehlahisoa se nkeloang sebaka.
Tiisetso e lekanyelitsoeng ea SmartAVI e sebetsa naheng efe kapa efe moo sehlahisoa se koahetsoeng se ajoang ke SmartAVI.
B. Meeli ea tiisetso
Ho fihlela joale ho lumelletsoeng ke molao oa lehae, SmartAVI kapa barekisi ba mekhatlo ea boraro ha ba fane ka tiisetso kapa maemo a mofuta ofe kapa ofe ho sa tsotellehe hore na o hlahisoa kapa o boleloa mabapi le sehlahisoa sa SmartAVI, 'me ka ho khetheha ba hana litiisetso kapa maemo a thekiso, boleng bo khotsofatsang le ho phela hantle. ka sepheo se itseng.
C. Mefokolo ea melato
Ho ea moo molao oa lehae o lumellang litlhare tse fanoeng setatementeng sena sa tiisetso ke bareki feela le liphekolo tse ikhethileng.
Ho ea ka nako e lumelletsoeng ke molao oa lehae, ntle le boitlamo bo boletsoeng polelong ena ea tiisetso, ha ho ketsahalo eo SmartAVI kapa barekisi ba eona ba mekha ea boraro ba tla ikarabella bakeng sa litšenyehelo tse tobileng, tse sa tobang, tse khethehileng, tsa tšohanyetso kapa tse ipapisitseng le konteraka, tlōlo ea molao. kapa khopolo efe kapa efe e 'ngoe ea molao le hore na ba eletsoe ka monyetla oa tšenyo e joalo.
D. Molao oa lehae
Ho isa moo polelo ena ea tiisetso e sa lumellaneng le molao oa lehae, polelo ena ea tiisetso e tla nkoa e fetotsoe hore e lumellane le molao o joalo.
TSEBISO
Lintlha tse teng tokomaneng ena li ka fetoha ntle le tsebiso. SmartAVI ha e fane ka tiisetso ea mofuta ofe kapa ofe mabapi le thepa ena, ho kenyeletsoa, empa ha e felle feela, litiisetso tse boletsoeng tsa thekiso le ho sebetsa hantle molemong o itseng. SmartAVI e ke ke ea jara boikarabello bakeng sa liphoso tse teng mona kapa ts'enyehelo ea tšohanyetso kapa ea litlamorao mabapi le ho fana ka thepa, ts'ebetso kapa ts'ebeliso ea thepa ena. Ha ho karolo ea tokomane ena e ka kopitsoang, ea etsoa hape, kapa ea fetoleloa puong e 'ngoe ntle le tumello e ngotsoeng pele ho SmartAVI, Inc.
Bala haholoanyane ka Bukana ena & Khoasolla PDF:
Litokomane / Lisebelisoa
 |
Smart-AVI SM-MST SERIES MST DP KVM e nang le MULTIPLE 4K HDMI Out [pdf] Bukana ea Mosebelisi SM-MST SERIES, MST DP KVM with MULTIPLE 4K HDMI Out, MULTIPLE 4K HDMI Out, MST DP KVM |
