ProPlex CodeBridge TimeCode Kapa Midi Over Ethernet
- TMB e fa bareki ba eona tumello ea ho khoasolla le ho hatisa bukana ena e hatisitsoeng ka mokhoa oa elektroniki hore e sebelisoe ke litsebi feela.
- TMB e thibela tlhahiso, tokiso kapa kabo ea tokomane ena molemong ofe kapa ofe, ntle le tumello e ngotsoeng e hlakileng.
- Litlhaloso li ka fetoha ntle le tsebiso. Lintlha tse tokomaneng ena li nka sebaka sa tlhahisoleseling eohle e fanoeng pele ho letsatsi la ho qala le thathamisitsoeng ka tlase. TMB e na le tšepo ea ho nepahala ha tlhahisoleseding ea tokomane e mona empa ha e nke boikarabelo kapa boikarabelo bakeng sa tahlehelo leha e le efe e hlahang e le sephetho se tobileng kapa se sa tobang sa liphoso kapa ho qheleloa ka thōko ebang ke ka kotsi kapa lebaka leha e le lefe.
ProPlex CodeBridge ke setho sa sistimi ea rona ea LTC Device e etselitsoeng ho hlahisa, ho aba le ho beha leihlo timecode. Moralo oa rona o matsutla-tsutla, o koaletsoeng o sebetsa hantle hore baetsi ba li-desktop ba ka li lahlela ka mokotleng ha ba ntse ba tenyetseha ka ho lekana ho kenya rakeng e nang le RackMount Kit ea boikhethelo. Lahlela CodeBridge kae kapa kae moo u hlokang ho arolelana nako e hokahaneng ka botlalo lipakeng tsa mafapha a mangata le lisebelisoa tse ling tsa TMB LTC marang-rang.
LITŠOANTŠISO TSA KHOLO
- Ho ipapisitsoe le palo e se nang moeli ea CodeBridges e ka khonehang marang-rang a tšoanang
- Phanele ea taolo ea OLED e nang le sebopeho se hlakileng sa mosebelisi le oache ea LTC, oscilloscope, le ponts'o ea boemo
- Phihlello le tlhophiso ea hole ka ProPlex Software GUI* kapa e hahelletsoeng web leqephe
- Likhetho tsa li-interface li kenyelletsa bokhoni ba ho reha mabitso le ho khetha lipakeng tsa mehloli e mengata ea CodeBridge *
- Liphetho tse peli tsa XLR3 LTC tse arohaneng le li-transformer tse peli. Boemo bo feto-fetohang ba tlhahiso (-18dBu ho + 6dBu)
- Li-LED tsa maemo a ka pele bakeng sa Ethernet, MIDI le LTC
- Compact, e bobebe, e matsutla, e ka tšeptjoa. Mochila botsoalle
- Likhetho tse fumanehang tsa rackmount kit
- Matla a sa hlokahaleng - USB-C le PoE
*RTP MIDI, ts'ebetso ea ProPlex Software le ho reha mabitso le ho khethoa ha mehloli li tla eketsoa lintlafatsong tse tlang tsa firmware.
TAOA LIKHOUTU
| KAROLO LIPALO | LEBITSO LEHOLO |
| PPCODEBLME | PROPLEX CODEBRIDGE |
| PP1RMKITSS | 1U RACKMOUNT KIT, E NYENYANE, E LE NYENG |
| PP1RMKITSD | 1U RACKMOUNT KIT, NYENYANE, DUAL |
| PP1RMKITS+MD | PROPLEX 1U DUAL COMBINATION NYENYANE + MEDIUM |
MOHLALA PHATLALAVIEW
LITŠOANTŠISO TSA TŠEBELETSO TSE PHETHALENG
TLHOPHISO
Litlhokomelo tsa Tšireletso
Ka kopo bala litaelo tsena ka hloko.
Tataiso ena ea basebelisi e na le lintlha tsa bohlokoa mabapi le ho kenya, ho sebelisoa le tlhokomelo ea sehlahisoa sena
- Netefatsa hore sesebelisoa se hokahane le molumo o nepahetsengtage, le mola oo voltage ha e phahame ho feta e boletsoeng ho litlhaloso tsa sesebelisoa
- Etsa bonnete ba hore ha ho na lisebelisoa tse ka benyang haufi le yuniti ha e ntse e sebetsa
- Kamehla sebelisa thapo ea tšireletso ha u leketlisa thepa ka holimo
- Kamehla hakolla mohloling oa motlakase pele o sebeletsa kapa o fetola fuse (ha ho hlokahala)
- Boholo ba mocheso o phelang (Ta) ke 40°C (104°F). Se ke oa sebelisa yuniti ka mocheso o phahameng ho feta tekanyo ena
- Haeba ho na le bothata bo tebileng ba ho sebetsa, khaotsa ho sebelisa yuniti hang-hang. Litokiso li tlameha ho etsoa ke basebetsi ba koetlisitsoeng, ba lumelletsoeng. Ikopanye le setsi se haufi se lumelletsoeng sa thuso ea tekheniki. Ke likarolo tse ling tsa OEM feela tse lokelang ho sebelisoa
- Se ke oa hokela sesebelisoa ho pakete ea dimmer
- Etsa bonnete ba hore thapo ea motlakase ha e honyehe kapa ea senyeha
- Le ka mohla u se ke ua hakolla thapo ea motlakase ka ho hula kapa ho hula thapo
TLHOKOMELO! Ha ho na likarolo tse sebelisoang ke basebelisi ka har'a yuniti. U se ke ua bula ntlo kapa ua leka ho e lokisa. Haeba ho ka etsahala hore ebe yuniti ea hau e ka hloka ts'ebeletso, ka kopo bona tlhaiso-leseling e fokolang ea tiisetso qetellong ea tokomane ena
PHAHLOLA
Ha u fumana yuniti, bula lebokose ka hloko 'me u hlahlobe litaba ho netefatsa hore likarolo tsohle li teng le hore li maemong a matle. Tsebisa morekisi hang-hang 'me u boloke thepa ea ho paka hore e hlahlojoe haeba likarolo tse ling li bonahala li senyehile ka lebaka la ho romelloa kapa haeba lebokose ka bolona le bontša matšoao a ho ts'oaroa hampe. Boloka lebokose le lisebelisoa tsohle tsa ho paka. Haeba yuniti e tlameha ho khutlisetsoa fekthering, ke habohlokoa hore e khutlisetsoe ka lebokoseng la pele la fektheri le ho paka.
KEKELETSENG
- ProPlex CodeBridge
- Cable ea USB-C
- Clamp
- Karete ea ho khoasolla khoutu ea QR
LITLHAKISO MATLA
ProPlex CodeBridge e na le likhokahano tsa motlakase tse sa sebetseng.
- Matlafatsa sesebelisoa ka thapo ea USB-C e hoketsoeng tjhajang efe kapa efe e tloaelehileng ea 5 VDC ea leboteng kapa koung ea USB ea komporo
- Fana ka Matla holim'a Ethernet (PoE) ka ho hokela boema-kepe ba CodeBridge Ethernet ho sesebelisoa kapa ente e lumelletsoeng ea PoE.
Maemong a mang, u ka 'na ua batla ho sebelisa likhokahano ka bobeli. Likarolo tse tsamaisoang ka PoE li lumella ho fihlella web sebatli ka komporo efe kapa efe e hoketsoeng marangrang a tšoanang. Ho feta moo, lisebelisoa tsohle tse hokahaneng tsa CodeBridge li tla arolelana data ea phallo ka Ethernet. Lihokelo tsa USB-C li lumella puisano ea data ea MTC hammoho le ho kenya motlakase.
KEKETSO
Sebaka sa ProPlex CodeClock se entsoe ho nahanoa ka moqapi oa bohahlauli. Re ne re batla hore lisebelisoa tsena li be bobebe, li khone ho paketeha 'me li khone ho tsitsa - kahoo re li kentse maoto a rabara a maholo ho feta ho li boloka li eme libakeng tse ngata Likarolo tsena li boetse li tsamaisana le Small RackMount Kits haeba li hloka ho kenngoa ka ho sa feleng bakeng sa lits'ebetso tsa bohahlauli.
RACKMOUNT KENYA MITAELO
ProPlex RackMount Kits lia fumaneha bakeng sa litlhophiso tsa ho kenya Single-Unit le Dual-Unit Ho tiisa litsebe tsa rack kapa lihokelo ho chassis ea ProPlex PortableMount, o tlameha ho tlosa li-screw tse peli tsa chassis lehlakoreng ka leng ka pele ho chassis. Li-screw tse tšoanang li sebelisetsoa ho tiisa litsebe tsa RackMount ka mokhoa o sireletsehileng le lihokelo tsa chassis Bakeng sa tlhophiso ea li-unit tse peli, ho tla sebelisoa li-screw tsa chassis tse ka pele le tse ka morao.
BOHLOKOA : Etsa bonnete ba hore o kenya li-screws hape ka har'a yuniti ka mor'a hore litsebe li tlosoe. Boloka RackMount Kit sebakeng se sireletsehileng ho fihlela se hlokahala hape. Li-spare screws li fumaneha ho tsoa ho TMB ha ho hlokahala
RACKMOUNT KENYA MITAELO
The Single-Unit Small RackMount Kit e entsoe ka litsebe tse peli tsa rack, E NNGWE e telele le E NNGWE e khutšoane. Setšoantšo se ka tlase se bontša ho kengoa ho phethiloeng ha RackMount Kit. Litsebe tsena tsa rack li etselitsoe ho lekana, e le hore litsebe tse khutšoane le tse telele li ka fetoha.
Dual-Unit Small RackMount Kit e na le litsebe tse PEDI tse khutšoane tsa rack le tse kopanyang tse PEDI. Setšoantšo se ka tlase se bontša ho kengoa ho phethiloeng ha RackMount Kit. Tokiso ena e hloka lihokelo tse PEDI tsa setsi tse hoketsoeng ka pele le ka morao
HO KENYA MAHLOMOLA MABAKA
Dual-Unit Small RackMount Kit e kenyelletsa likhokahano tse TSOHLE tse kopanyang le li-screw tse TSOHLE tsa li-countersunk flat head. Lihokelo tsena li etselitsoe ho kopana 'me li sirelelitsoe ka li-screw tse kenyellelitsoeng le masoba a khoele. Karolo e 'ngoe le e' ngoe ea lihokelo e tšoana. Fetola sehokelo se kopanyang feela 'me u thehe likoti tsa ho kenya ho kenya ka lehlakoreng le letšehali kapa le letona la yuniti e tsamaellanang.
TS'EBETSO
ProPlex CodeBride e ka hlophisoa habonolo ka onboard OLED Display le likonopo tsa ho tsamaea ka pele ho yuniti.
LIEKETSENG LEHAE
CodeBridge e na le 3 HOME SCREENS tse arohaneng tse bonts'ang liparamente tse fapaneng tsa melapo e kenang ea timecode. Potoloha lipakeng tsa li-skrini tsena ka ho tobetsa kapa ho 
konopo
- Skrine sa lapeng 1
Molapo o kenang oa LTC IN o hlahisoa kaholimo ho skrine ha sebaka se tlase se bonts'a oscillogram le vol.tage level bar ho bonts'a boemo ba lets'oao ho tsoa mohloling oa LTC feela
Tlhokomeliso: Ha e le hantle mouoane oa LTC IN o lokela ho tšoana le leqhubu la sekwere le boemo bo phahameng ba tlhahiso. Haeba boemo bo le tlase haholo, leka ho eketsa molumo mohloling ho ntlafatsa lets'oao - Skrine sa lapeng 2
Skrine sena se bonts'a mehloli eohle ea timecode eo CodeBridge e ka e bonang
Mohloli o ka holimo-limo ke mohloli o sebetsang oa hajoale o fetisetsoang hape ho tsoa likhokahanong tse tsoang. Mohloli ofe kapa ofe o sebetsang o tla totobatsoa ka bokamorao bo panyang
Skrine sa lapeng 3
Skrine ea boraro e bonts'a tlhaiso-leseling ea sebopeho ho melapo eohle e fumanoeng joalo ka Skrine sa Lehae sa 2, mohloli o kaholimo ho fetisisa ke mohloli o sebetsang oa hajoale o fetisitsoeng hape ho tsoa likhokahanong tse hlahisoang. Mohloli ofe kapa ofe o sebetsang o tla totobatsoa ka bokamorao bo panyang
Main menu
Main Menu e ka fumaneha ka ho tobetsa konopo ea 
konopo le boholo ba dikgetho ka exited ka konopo Scroll with the konopo ebe o netefatsa khetho ka ho konopo.
Hlokomela: Ha se li-menu tsohle tse tla lekana skrineng sa sesebelisoa kahoo o tla hloka ho tsamaisetsa ho fumana menyetla e meng. Lehlakore le letona la li-skrini tse ngata tsa menu le tla bontša sebaka sa moqolo se tla thusa ho bonts'a botebo ba navigation ea moqolo.
Jenereithara ea khoutu ea nako
CodeBridge e ka hlahisa LTC e hloekileng, e phahameng ho tsoa likoung tse peli tse ka thoko tsa XLR3 (tse ka morao ho yuniti ka 'ngoe)
Sebelisa le konopo, ebe u netefatsa khetho ka ho konopo ea ho potoloha lipakeng tsa likhetho tse fapaneng tsa jenereithara
- Sebopeho: Khetha pakeng tsa litekanyetso tse fapaneng tsa FPS tse tloaelehileng tsa indasteri 23.976, 24, 25, 29.97ND, 29.97DF, le 30 FPS. Haeba sebopeho se khethiloeng se lumellana le MTC kapa Art-Net timecode, se tla fetisoa le ka har'a port interface (MIDI OUT kapa Ethernet port)
- Nako ea ho Qala: Hlalosa nako ea ho qala ea HH:MM:SS:FF u sebelisa likonopo tsa ho tsamaea
- Lintlha tsa mosebelisi: Hlalosa data ea mosebelisi ka sebopeho sa 0x00000000 hex
- Bapala, Emisa, Khutlela morao: Litaolo tsa ho bapala tsa basebelisi bakeng sa kh'outu ea nako e hlahisitsoeng.
Hlokomela: o tlameha ho lula skrineng sena ho tsoela pele ho sebelisa jenereithara ea LTC. Haeba u tsoa skrineng sena, jenereithara e tla emisa ka bo eona, 'me mohloli oa hona joale o tla fetohela mohloling o latelang o sebetsang
Boemo ba Sephetho
Matlafatsa kapa fokotsa boemo ba tlhahiso ho tloha ho +6 dBu ho ea ho -12 dBu. Ntho e ngoe le e ngoe e hlahisoang ka likou tse peli tse ka thoko tsa XLR3 e angoa ke phetoho ea boemo bona.
Sena se kenyelletsa:
- Sephetho sa jenereithara
- E fetiselitsoe hape lifomate tsa timecode ho tsoa ho tse ling tse kentsoeng
Sebelisa lekonopo, ebe u netefatsa khetho ka ho konopo ea ho potoloha lipakeng tsa maemo a fapaneng a tlhahiso. Letšoao la linaleli le tla bontša boemo ba tlhahiso e khethiloeng hajoale
Liforeimi tsa pele
- Pre-roll ke palo ea liforeimi tse nepahetseng tse hlokahalang ho nahana hore mohloli oa timecode o nepahetse le ho qala ho o fetisetsa ho liphetho.
- Sebelisa
konopo ho totobatsa boleng ba Pre-roll, ebe o tobetsa konopo ea ho edita - Sebelisa le konopo ho seta liforeimi tsa Pre-roll (1-30) le ho boloka boleng
Hlokomela: Pontšo e sebetsang e tla lula e bonts'a molatsoana o kenang oa LTC ho qala ka foreimi ea pele e amoheloang ho sa tsotelehe litlhophiso tsa Pre-roll.
Liforeimi tsa poso
- Liforeimi tsa poso li thusa ho lokisa liforeimi tse fosahetseng kapa tse theohileng mohloling oa timecode
- Ha molapo o emisoa ka lebaka lefe kapa lefe, phetisetso e tla tsoelapele ho fihlela palo e lekanang le litlhophiso tsa liforeimi tsa Post-roll e fihletsoe.
- Haeba bothata bo sa tsitsang bo rarollotsoe ka har'a fensetere ea Post-roll, sesebelisoa se tla tsoela pele ho shebella nako ntle le tšitiso
- Sebelisa konopo ho totobatsa boleng ba Post-roll, ebe o tobetsa konopo ho hlophisa. Sebelisa ho khetha sebaka sa boleng ka sebopeho sa HH:MM:SS:FF
- Tobetsa konopo ho hlophisa boleng bo bong le bo bong ha ho hlokahala, ho sebelisa kapa ho fetola palo. Tobetsa ka mor'a ho hlophisa ho boloka boleng bo bong le bo bong 'me u phete ho hlophisa e latelang.
IP Aterese
- View beha Aterese ea IP le Netmask ea yuniti
Tlhokomeliso: Ena ke aterese e sebelisoang ho fihlella CodeBridge Web Sebatli. Sena se sebelisoa haholo ho beha leihlo le ho nchafatsa yuniti ka 'ngoe ka lintlafatso tsa firmware tsa nakong e tlang - Sebelisa konopo ho totobatsa, ebe o tobetsa konopo ea ho hlophisa aterese ea IP kapa Netmask
- Sebelisa ho khetha boleng ka sebopeho sa xxxx. Tobetsa ho edita, o sebedisa ho fetola boleng bo bong le bo bong hape le ho boloka. Pheta ho fetola octet ka 'ngoe
Lebitso la Sesebelisoa
Iketsetse lebitso la tloaelo bakeng sa sesebelisoa
Backspace
Fetolela ho UPPERCASE
Tsamaisa sesupa- 123 Mohlophisi oa linomoro
- – Eketsa sebaka
- Sebelisa ho khetha le ho totobatsa sesebelisoa sa ho lokisa kapa lengolo, ebe o tobetsa ho netefatsa kgetho
- Totobatsa lethathamo la 123 ebe o tobetsa ho kenya tlhaku ya palo.
- Sebelisa ho khetha 0-9 ebe o tobetsa hape ho netefatsa kgetho le ho ngola tlhaku sebakeng sa mabitso
- Ha ho lokisa mabitso ho phethiloe, totobatsa OK ebe o tobetsa ho boloka le ho tsoa
Lintlha tsa Sesebelisoa
Lintlha tsa Sesebelisoa li bonts'a lintlha tsa boemo ba yuniti. Lintlha tse hlahang ke:
- Lebitso la Sesebelisoa
- IP Aterese
- NetMask
- Aterese ea MAC
Tobetsa ho tsoa 
Boitsebiso ba Firmware
Firmware Info e bonts'a tlhahisoleseling ea boemo ba yuniti. Lintlha tse hlahang ke
- Nomoro ea Phetolelo
- Theha letsatsi
- Theha nako
Tobetsa ho tsoa
MENU MPA
LITLHAKU TSE KHOLO TSA LED
MIDl IN:
E fumana timecode
E fumana data eo e seng timecode
HARE HO TSOA:
- E fetisetsa khoutu ea nako ho tsoa mohloling
E fetisa khoutu ea nako, poso e ea sebetsa- E fetisetsa data eo e seng timecode
LTC IN:
- E fumana timecode, empa motsotsoana o le mong ha o so fete ntle le liphoso kapa ho tlola ka har'a timecode
- E fumana timecode ntle le ho tlola kapa liphoso nako e fetang motsotsoana
Nako e amohetsoe, empa ha e so amoheloe hajoale
LTC OUT:
- E fetisa khoutu ea nako, poso e ea sebetsa
E fetisetsa timecode, jenereithara ea ka hare ea sebetsa- E fetisetsa khoutu ea nako ho feta motsotsoana o le mong
- E fetisa khoutu ea nako, empa motsotsoana o le mong ha o so fete ho tloha qalong ea phetisetso
WEB MOEKETSI
Khomphuta efe kapa efe e nang le marang-rang e ka fihlella CodeBridge Web Sebatli
Fumana aterese ea IP ea yuniti (litaelo tse kaholimo) ebe u ngola aterese ea IP ka har'a aterese ea sebatli seo u se ratang haholo. U lokela ho hlahisoa le leqephe le latelang la ho fihla:
Tlhokomeliso: komporo kapa laptop li lokela ho ba maemong a tšoanang a marang-rang - 2.XXX
LIEKETSENG LITLHAKISO
Ka linako tse ling re tla lokolla lisebelisoa tsa firmware tse nang le likarolo tse ncha kapa litokiso tsa liphoso. Firmware bakeng sa likarolo tsohle tsa ProPlex e fumaneha ka TMB Cloud
Sehokelo sa TMB Cloud se tlasa menyu ea Lisebelisoa ho mantlha ea rona websebaka https://tmb.com/
Ho nchafatsa, khoasolla firmware.bin e ncha file ho komporo ea hau. Ebe u kenya "Firmware Upgrade" menu ka ho tobetsa konopo Web Sebatli
PHETLA LE TS'OANELO
Ho bokellana ha lerōle likoung tsa likhokahano ho ka baka mathata a ts'ebetso mme ho ka baka tšenyo e eketsehileng nakong ea tloaelo le ho taboha lisebelisoa tsa CodeClock li hloka ho hloekisoa nako le nako ho boloka ts'ebetso e ntle, haholo-holo likarolo tse sebelisoang maemong a thata a tikoloho.
TSE LATELANG KE LITATAISO KA KAKARETSO TSA HO HLEKA:
- Kamehla tima motlakase pele u leka ho hloekisa
- Ema ho fihlela yuniti e pholile 'me e tsoa ka ho feletseng pele e hloekisa
- Sebelisa vacuum kapa moea o hatelitsoeng o omileng ho tlosa lerōle / litšila kahare le haufi le likhokahano
- Sebelisa thaole e bonolo kapa borashe ho hlakola le ho phunya 'mele oa chassis
- Ho hloekisa skrini sa ho sesa, sebelisa joala ba isopropyl ka lesela le bonolo la lense kapa k'hothone e sa lefelloeng
- Li-pads tsa joala le malebela a q li ka thusa ho tlosa litšila le masala ho likonopo tsa ho sesa.
BOHLOKOA:
Etsa bonnete ba hore libaka tsohle li omme pele u leka ho kenya motlakase hape
LIEKETSENG MOKHOPO
| Nomoro ea Karolo | PPCODEBLME |
| Sehokelo sa Matla | USB-C |
| Ethernet (& PoE in) Sehokelo | Neutrik EtherCON™ RJ45 |
| MIDI Input Connector | DIN 5-Pin Mosadi |
| MIDI Output Connector | DIN 5-Pin Mosadi |
| Sehokelo sa ho Kena sa LTC | Neutrik™ Combination 3-Pin XLR le 1/4” TRS e tšehali |
| LTC Output Connectors | Neutrik™ 3-Pin XLR Monna |
| Tshebetso Voltage | 5 VDC USB-C kapa 48 VDC PoE |
| Tšebeliso ea Matla | TBA |
| Mocheso oa Ts'ebetso. | TBA |
| Litekanyo (HxWxD) | 1.72 x 7.22 x 4.42 ho [43.7 x 183.5 x 112.3 mm] |
| Boima ba 'mele | 1.2 lik'hilograma. [0.54 lik'hilograma] |
| Boima ba ho Romela | 1.4 lik'hilograma. [0.64 lik'hilograma] |
MEKETSO TIISETSO TSEBISO
ProPlex Data Distribution Devices e tiisitsoe ke TMB khahlano le thepa e nang le bokooa kapa moetso oa nako ea lilemo tse peli (2) ho tloha ka letsatsi la thekiso ea mantlha ke TMB. Tiisetso ya TMB e tla lekanyetswa feela tokisong kapa tokisong ya karolo efe kapa efe e iponahatsang e fosahetse mme tleleime e romelwa ho TMB pele nako ya tiisetso e fela.
Tiisetso ena e Lekanyelitsoeng ha e na letho haeba mefokolo ea Sehlahisoa e bakiloe ke:
- Ho bula khese, ho lokisoa kapa ho lokisoa ke mang kapa mang ntle le TMB kapa batho ba lumelletsoeng ka kotloloho ke TMB
- Kotsi, tlhekefetso ea 'mele, ho tšoaroa hampe, kapa tšebeliso e mpe ea sehlahisoa.
- Tšenyo e bakiloeng ke lehalima, tšisinyeho ea lefatše, likhohola, bokhukhuni, ntoa, kapa ketso ea Molimo.
TMB e ke ke ea jara boikarabello bakeng sa mosebetsi ofe kapa ofe o sebelisitsoeng, kapa thepa e sebelisitsoeng, ho khutlisa le/kapa ho lokisa Sehlahisoa ntle le tumello e ngotsoeng pele ea TMB. Tokiso efe kapa efe ea Sehlahisoa tšimong, le litefiso life kapa life tse amanang le mosebetsi, li tlameha ho lumelloa esale pele ke TMB. Litšenyehelo tsa thepa mabapi le tokiso ea tiisetso li arotsoe ka 50/50: Moreki o lefa ho romela sehlahisoa se nang le bothata ho TMB; TMB e lefella ho romela thepa e lokisitsoeng, thepa ea fatše, ho khutlela ho Moreki. Tiisetso ena ha e koahele litšenyehelo tse bakiloeng kapa litšenyehelo tsa mofuta ofe kapa ofe.
Nomoro ea Return Merchandise Authorization (RMA) e tlameha ho fumanoa ho TMB pele ho khutlisoa thepa efe kapa efe e nang le bothata bakeng sa tiisetso kapa tokiso e seng tiisetso. Bakeng sa lipotso tsa tokiso, ka kopo ikopanye le TMB ka lengolo-tsoibila ho TechSupport@tmb.com kapa founela ho e 'ngoe ea libaka tsa rona tse ka tlase:
TMB US
- 527 Park Ave..
- San Fernando, CA 91340
- United States
- Mohala: +1 818.899.8818
- TMB UK
- 21 Tsela ea Armstrong
- Southall, UB2 4SD
Engelane
- Mohala: +44 (0)20.8574.9700
- U ka boela ua ikopanya le TMB ka kotloloho ka
- imeile ho TechSupport@tmb.com
PUSELETSO MOKHOA
Ka kopo ikopanye le TMB 'me u kope tekete ea ho lokisa le Nomoro ea Tumello ea ho Khutlisa Merchandise pele u romela thepa bakeng sa ho lokisoa. Itokisetse ho fana ka nomoro ea mohlala, nomoro ea serial, le tlhaloso e khuts'oane ea sesosa sa ho khutla hammoho le aterese ea thomello le lintlha tsa ho ikopanya. Hang ha tekete ea ho lokisa e se e sebelitsoe, RMA # le litaelo tsa ho khutlisa li tla romelloa ka lengolo-tsoibila ho motho eo u kopanang le eena ho file.
Ngola ka ho hlaka liphutheloana life kapa life tsa thomello ka ATTN: RMA#. Ka kopo, khutlisetsa thepa e lefiloeng esale pele le ka har'a sephutheloana sa pele neng kapa neng ha ho khoneha. O SE KE oa kenyelletsa likhoele kapa lisebelisoa (ntle le haeba u eletsoa ka tsela e 'ngoe). Haeba sephutheloana sa mantlha se le sieo, etsa bonnete ba hore u paka hantle le ho sireletsa lisebelisoa life kapa life. TMB ha e ikarabelle bakeng sa ts'enyehelo efe kapa efe ea thomello e bakiloeng ke ho sephuthela hantle ke motho ea rometseng. Mohala oa thepa tags e ke ke ea fanoa bakeng sa tokiso ea thomello ho TMB, empa TMB e tla lefa thepa hore e khutlisetsoe ho moreki haeba tokiso e tšoaneleha bakeng sa tšebeletso ea tiisetso. Litokiso tseo e seng tsa tiisetso li tla kena tšebetsong ea quotation ke setsebi se abetsoeng tokiso. Litšenyehelo tsohle tse amanang le likarolo, mosebetsi le thomello ea thepa li tlameha ho lumelloa ka lengolo pele mosebetsi ofe kapa ofe o ka phethoa. TMB e na le tokelo ea ho sebelisa boikhethelo ba eona ho lokisa kapa ho fetola lihlahisoa le ho fumana boemo ba tiisetso ea thepa efe kapa efe.
MOKHOA OA PUISANO
LOS ANGELES KHOLO
527 Park Avenue | San Fernando, CA 91340, USA
- Mohala: +1 818.899.8818
- Fax: + 1 818.899.8813 sales@tmb.com
- TMB 24/7 TŠEBELETSO EA THEKELE
- US/Canada: +1.818.794.1286
- Lenane la Mahala: 1.877.862.3833 (1.877.TMB.DUDE)
- UK: + 44 (0) 20.8574.9739
- Nomoro ea mahala: 0800.652.5418 techsupport@tmb.com
- TMB 24/7 TŠEBELETSO EA THEKELE
US/Canada: +1.818.794.1286
Lenane la Mahala: 1.877.862.3833 (1.877.TMB.DUDE) - UK: + 44 (0) 20.8574.9739
- Nomoro ea mahala: 0800.652.5418
- techsupport@tmb.com
Khamphani ea litšebeletso tse felletseng e fanang ka tšehetso ea tekheniki, litšebeletso tsa bareki le ho latela.
Ho fana ka lihlahisoa le lits'ebeletso bakeng sa indasteri, boithabiso, meralo, ts'ebetso, ts'ireletso, phatlalatso, lipatlisiso, likhokahano tsa mehala le liindasteri tsa matšoao. Los Angeles, London, New York, Toronto, Riga le Beijing.
E qala ka la 11 Phupu 2025. © Copyright 2025, TMB. Litokelo tsohle li sirelelitsoe
LBH
P: Na li-screws tse setseng li teng bakeng sa RackMount Kit?
A: Ee, li-spare screws li teng ho tsoa ho TMB ha ho hlokahala. Ikopanye le tšehetso ea bareki bakeng sa thuso ka likarolo tse ling.
Litokomane / Lisebelisoa
 |
ProPlex CodeBridge TimeCode Kapa Midi Over Ethernet [pdf] Bukana ea Mosebelisi CodeBridge TimeCode Kapa Midi Over Ethernet, CodeBridge, TimeCode Kapa Midi Over Ethernet, Midi Over Ethernet, Over Ethernet, Ethernet |