ProPlex CodeBridge TimeCode Or Midi Over Ethernet
- Tha TMB ag ùghdarrachadh a luchd-ceannach an leabhar-làimhe seo a chaidh fhoillseachadh gu dealanach a luchdachadh sìos agus a chlò-bhualadh airson cleachdadh proifeasanta a-mhàin.
- Tha TMB a’ toirmeasg ath-riochdachadh, atharrachadh no cuairteachadh na sgrìobhainn seo airson adhbhar sam bith eile, gun chead sgrìobhte soilleir.
- Specifications are subject to change without notice. The information in this document supersedes all previously supplied information before the effective date listed below. TMB has confidence in the accuracy of the document information herein but assumes no responsibility or liability for any loss occurring as a direct or indirect result of errors or exclusions whether by accident or any other cause.
The ProPlex CodeBridge is a member of our LTC Device system which is designed to generate, distribute and monitor timecode. Our rugged, compact mini-enclosure design is perfect for desktop programmers to throw in bag while also being flexible enough to install in a rack with an optional RackMount Kit. Drop a CodeBridge anywhere you need to share a fully synchronized timecode stream between multiple departments and other TMB LTC devices on the network.
PRÌOMH CHOMHARRAN
- Theoretically unlimited number of CodeBridges possible on the same network
- OLED control panel with intuitive user interface and LTC clock, oscilloscope, and level display
- Remote access and configuration via ProPlex Software GUI* or built-in web duilleag
- Interface options include the ability to name and select between multiple CodeBridge sources*
- Two transformer-isolated XLR3 LTC outputs. Adjustable output level (-18dBu to +6dBu)
- Front panel status LEDs for Ethernet, MIDI and LTC
- Beag, aotrom, làidir, earbsach. Càirdeil do bhac-droma.
- Roghainnean pasgan raca a tha rim faighinn
- Redundant power – USB-C and PoE
*RTP MIDI, ProPlex Software functionality and naming and selecting of sources will be added in future firmware updates
CODADH ORDUICH
| PÀIRT ÀIREAMH | AINM AN TORAIDH |
| PPCODEBLME | PROPLEX CODEBRIDGE |
| PP1RMKITSS | 1U RACKMOUNT KIT, SMALL, SINGLE |
| PP1RMKITSD | 1U RACKMOUNT KIT, SMALL, DUAL |
| PP1RMKITS+MD | PROPLEX 1U CO-CHÒRDADH DÙBAILT BEAG + MEADHANACH |
MODEL AIRSONVIEW
DEALBHAN UÈIR-FHRÈAM LÀN-THOMHAISEACH
SUIDHICH
Ceumannan Sàbhailteachd
Feuch an leugh thu an stiùireadh seo gu faiceallach.
Tha fiosrachadh cudromach san stiùireadh-cleachdaidh seo mu stàladh, cleachdadh agus cumail suas an toraidh seo.
- Dèan cinnteach gu bheil an inneal ceangailte ris an tomhas-lìonaidh chearttage, agus an loidhne sin voltagchan eil e nas àirde na an ìre a tha air a ràdh ann an sònrachaidhean an inneil
- Dèan cinnteach nach eil stuthan lasanta faisg air an aonad fhad ‘s a tha thu ag obair
- Cleachd càball sàbhailteachd an-còmhnaidh nuair a bhios tu a’ crochadh inneal-solais os do chionn
- Dì-cheangail an-còmhnaidh bhon stòr cumhachd mus dèan thu seirbheis no mus cuir thu fiùs ùr na àite (mas e iomchaidh).
- Is e 40°C (104°F) an teòthachd àrainneachdail as àirde (Ta). Na cleachd an aonad aig teòthachd os cionn an rangachadh seo.
- Ma thachras duilgheadas obrachaidh dona, sguir a chleachdadh an aonaid sa bhad. Feumaidh luchd-obrach ùghdarraichte, air an trèanadh, càradh a dhèanamh. Cuir fios chun ionad taic theicnigeach ùghdarraichte as fhaisge ort. Cha bu chòir ach pàirtean a bharrachd OEM a chleachdadh.
- Na ceangail an inneal ri pasgan dimmer
- Dèan cinnteach nach bi càball cumhachd air a phronnadh no air a mhilleadh a-riamh
- Na dì-cheangail càball cumhachd le bhith a’ tarraing no a’ tarraing air a’ chorda
CUAIRT! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please see the limited warranty information at the end of this document
AONADH
Nuair a gheibh thu an aonad, thoir a-mach am bogsa gu faiceallach agus thoir sùil air na tha ann gus dèanamh cinnteach gu bheil a h-uile pàirt an làthair agus ann an deagh staid. Cuir fios chun neach-cuiridh sa bhad agus gleidh an stuth pacaidh airson sgrùdadh ma tha coltas gu bheil milleadh air pàirtean sam bith bhon luingearachd no ma tha comharran droch-làimhseachaidh air a’ bhogsa fhèin. Sàbhail am bogsa agus na stuthan pacaidh uile. Ma dh’fheumar aonad a thilleadh chun fhactaraidh, tha e cudromach gun tèid a thilleadh anns a’ bhogsa agus am pacaigeadh factaraidh tùsail.
DÈ A THA A THA A 'GABHAIL A-STEACH
- ProPlex CodeBridge
- Càball USB-C
- Neach-gleidhidh càball clamp
- Cairt luchdaich sìos còd QR
RIAGHAILTEAN CUMHACHD
The ProPlex CodeBridge has redundant power connections.
- Power the device via a USB-C cable connected to any standard 5 VDC wall charger or computer USB port
- Supply Power over Ethernet (PoE) by connecting the CodeBridge Ethernet port to any PoE enabled switch or injector.
In some cases, you may want to utilize both connections. Units powered via PoE allow access to the web browser via any computer connected to the same network. Additionally, all connected CodeBridge devices will share stream data via Ethernet. USB-C connections allow for MTC data communication as well as power-IN.
SEACHDADH
The ProPlex CodeClock enclosure was designed with the touring programmer in mind. We wanted these devices to be lightweight, packable and stackable – so we fitted them with oversized rubber feet to keep them stationary on most surfaces These units are also compatible with Small RackMount Kits should they need to be semi-permanently mounted for touring applications
STIÙIREADH STÀLAIDH RACA-MHUINNTE
ProPlex RackMount Kits are available for both Single-Unit and Dual-Unit mounting configurations To fasten the rack ears or joiners to the ProPlex PortableMount chassis, you must remove the two chassis screws on each side at the front of the chassis. These same screws are used to securely fasten the RackMount ears and joiners to the chassis For dual-unit configurations, both sets of front and rear chassis screws will be used
CUDROMACH : Be sure to reinsert the screws into the unit after ears have been removed. Store RackMount Kit in a safe location until needed again. Spare screws are available from TMB if needed
STIÙIREADH STÀLAIDH RACA-MHUINNTE
Tha an Pasgan Raca Beag Aon-Aonad air a dhèanamh suas de dhà chluas raca, AON chluas fhada agus AON chluas ghoirid. Tha an diagram gu h-ìosal a’ sealltainn stàladh crìochnaichte a’ Phasgan Raca. Tha na cluasan raca seo air an dealbhadh gus a bhith co-chothromach, gus an gabh na cluasan goirid is fada a chur an àite a chèile.
Tha dà chluas raca ghoirid agus dà cheangal aig a’ phasgan beag dà-aonad airson raca. Tha an diagram gu h-ìosal a’ sealltainn mar a chaidh am pasgan raca a stàladh gu tur. Feumaidh an rèiteachadh seo dà cheangal meadhanach a bhith ceangailte air an aghaidh agus air a’ chùl.
A’ STÀLADH NAN CEANGAL DÙBAILT
The Dual-Unit Small RackMount Kit includes FOUR joining links and FOUR countersunk flat head screws. These links are designed to nest into each other and are secured with the included screws and threaded holes. Each link piece is identical. Simply rotate the joining link and line up the installation holes to install on either the left or right side of the corresponding unit.
OBRACHADH
Faodar am ProPlex CodeBride a rèiteachadh gu furasta leis an taisbeanadh OLED air bòrd agus na putanan seòlaidh air beulaibh an aonaid.
SGRÌOBHAINN BHAILE
The CodeBridge has 3 separate HOME SCREENS that display different parameters of incoming timecode streams. Cycle between these screens by pressing either the 
putan
- Sgrion Dachaigh 1
The incoming LTC IN stream is displayed at the top of the screen while the bottom area shows oscillogram and voltage level bar to indicate signal level from the LTC source only
Note: Ideally the LTC IN steam should resemble a square wave with high output level. If level is too low, try increasing the volume at the source to improve the signal - Sgrion Dachaigh 2
This screen displays all sources of timecode that the CodeBridge can detect
The topmost source is the current active source which is retransmitted further from output connections. Whichever source is active will be highlighted with a blinking background
Sgrion Dachaigh 3
The third screen displays format information on all detected streams Like Home Screen 2, the top-most source is the current active source which is retransmitted further from output connections. Whichever source is active will be highlighted with a blinking background
Prìomh chlàr
Gheibhear cothrom air a’ Phrìomh Chlàr-taice le bhith a’ putadh air a’ phutan 
button and majority of options can be exited via the button Scroll with the putan agus dearbhaich an taghadh leis a’ phutan putan.
Thoir an aire: Cha bhi a h-uile clàr-taice iomchaidh air scrion an uidheim agus mar sin feumaidh tu sgroladh gus faighinn gu cuid de na clàran-taice. Nochdaidh taobh deas a’ mhòr-chuid de scrionaichean clàr-taice bàr-sgrolaidh a chuidicheas le bhith a’ comharrachadh doimhneachd an t-seòlaidh sgrolaidh.
Gineadair còd-tìm
The CodeBridge can generate clean, high output LTC out of the two isolated XLR3 ports (located on the rear of each unit)
Cleachd an putan, agus an uair sin dearbhaich an taghadh leis a’ phutan putan airson rothaireachd eadar na diofar roghainnean gineadair
- Format: Select between different industry standard FPS rates 23.976, 24, 25, 29.97ND, 29.97DF, and 30 FPS. If the selected format is compatible with MTC or Art-Net timecode, it will also be transmitted through that respective interface port (MIDI OUT or Ethernet ports)
- Start Time: Specify a start time of HH:MM:SS:FF using navigation buttons
- User Data: Specify user data in 0x00000000 hex format
- Play, Pause, Rewind: User playback controls for generated timecode.
Thoir an aire: Feumaidh tu fuireach air an sgrìn seo gus an gineadair LTC a chleachdadh gu leantainneach. Ma dh’fhàgas tu an sgrìn seo, stadaidh an gineadair gu fèin-ghluasadach, agus atharraichidh an stòr làithreach chun ath stòr gnìomhach.
Ìre toraidh
Boost or cut the output level from +6 dBu to -12 dBu. Everything outputting via the two isolated XLR3 ports is affected by this level change.
Tha seo a’ gabhail a-steach:
- Toradh gineadair
- Cruthan còd-ama air an ath-chraoladh bho chuir-a-steach eile
Cleachd anputan, agus an uair sin dearbhaich an taghadh leis a’ phutan button to cycle between the various output levels. The asterisk indicator will denote the currently selected output level
Frèamaichean ro-rolla
- ’S e ro-rolla an àireamh de fhrèamaichean dligheach a dh’fheumar gus beachdachadh air stòr a’ chòd-ama mar rud dligheach agus tòiseachadh air a chuir air adhart chun na toraidhean.
- Cleachd
the button to highlight the Pre-roll value, then press button to edit - Cleachd an button to set the Pre-roll frames (1-30) and to save the value
Thoir an aire: The active stream display will always show incoming LTC stream starting from the 1st received frame regardless of Pre-roll settings
Post-roll Frames
- Post-roll frames help correct erroneous or dropped frames in a timecode source
- When a stream is stopped for any reason, the transmission will continue until a count equivalent to the Post-roll frames setting is reached
- If an erratic source issue resolved within the Post-roll window, the device will continue streaming timecode without interruption
- Use the button to highlight the Post-roll value, then press button to edit. Use to select a value place in HH:MM:SS:FF format
- Press button to edit each value as needed, using or to change the count. Press after editing to save each value and repeat to edit the next.
Seòladh IP
- View set the IP Address and Netmask of the unit
Note: This is the address used to access the CodeBridge Web Browser. This is mainly used to monitor and update each unit with future firmware releases - Use the button to highlight, then press button to edit either IP Address or Netmask
- Cleachd to select a value in x.x.x.x format. Press to edit, using to change each value and again to save. Repeat to edit each octet
Ainm an inneal
Create a custom name for the device
Cùl-raon
Change to UPPERCASE
Gluais an cursair- 123 Number editor
- – Add a space
- Cleachd to select and highlight an editing tool or a letter, then press gus taghadh a dhearbhadh
- Highlight the 123 menu and press to input a numerical character.
- Cleachd to select 0-9 and press again to confirm selection and type the character in the name field
- When name editing is complete, highlight OK and press gus sàbhaladh agus fàgail
Fiosrachadh inneal
Device Info displays status information of the unit. The information displayed is:
- Ainm an inneal
- Seòladh IP
- Measg lìon
- Seòladh MAC
Brùth a mach 
Fiosrachadh firmware
Firmware Info displays status information of the unit. The information displayed is
- Tionndadh Àireamh
- Ceann-latha togail
- Togail ùine
Brùth a mach
MAP CLÀR
COMHARRAN STATUS LED
MIDl IN:
Receives timecode
Receives data which is not timecode
MEADHANAN A-mach:
- Transmits timecode from source
Transmits timecode, postroll is running- Transmits data which is not timecode
LTC ANN:
- Receives timecode, but 1 second has not passed without errors or jumps in timecode
- Receives timecode without jumps or errors for more than 1 second
Timecode was received, but is not received at the moment
LTC A-mach:
- Transmits timecode, postroll is running
Transmits timecode, internal generator is running- Transmits timecode for more than 1 second
- Transmits timecode, but 1 second has not passed from start of transmission
WEB BRATHAIR
Any networked computer can access the CodeBridge Web Brabhsair
Locate the IP address of the unit (instructions above) then type the IP address into the address bar of your favorite browser. You should be presented with the following landing page:
Note: computer or laptop should be in the same network range – 2.X.X.X
ÙRACHADH FIRMWARE
Occasionally we will release firmware updates that contain new features or bug fixes. Firmware for all ProPlex units is available via the TMB Cloud
Tha ceangal gu TMB Cloud fon chlàr-taice Goireasan air a’ phrìomh chlàr againn. weblàrach https://tmb.com/
To update, download the new firmware.bin file to your desktop. Then upload through the “Firmware Upgrade” menu via the Web Brabhsair
GLANADH AGUS MOLADH
Dust build-up in connector ports can cause performance issues and can potentially lead to further damage during normal wear and tear CodeClock devices need occasional cleaning to maintain best performance, especially units used in harsher environmental conditions
SEO A LEANAS STIÙIREADH COITCHEANN AIRSON GLANADH:
- Dì-cheangail an cumhachd an-còmhnaidh mus feuch thu ri glanadh sam bith
- Fuirich gus am bi an aonad air fuarachadh agus air a dhì-luchdachadh gu tur mus glan thu e
- Cleachd inneal-falmhachaidh no èadhar tioram teannaichte gus duslach/sprùilleach a thoirt air falbh anns na ceanglaichean agus timcheall orra.
- Cleachd clò bog no bruis gus corp a’ chassis a sguabadh agus a snasadh
- Gus an scrion seòlaidh a ghlanadh, cuir deoch-làidir isopropyl air le clò bog glanaidh lionsa no cotan gun lint.
- Dh’fhaodadh padaichean deoch làidir agus cnapan-q cuideachadh le bhith a’ toirt air falbh salachar is fuigheall sam bith bho phutanan seòlaidh
CUDROMACH:
Dèan cinnteach gu bheil na h-uachdaran uile tioram mus feuch thu ri cumhachd a chur air a-rithist
Sònrachaidhean Teicnigeach
| Pàirt Àireamh | PPCODEBLME |
| Ceangal cumhachd | USB-C |
| Ethernet (& PoE in) Connector | Neutrik EtherCON™ RJ45 |
| Ceanglaiche Cuir-a-steach MIDI | Boireann DIN 5-Prìne |
| Ceanglaiche Toraidh MIDI | Boireann DIN 5-Prìne |
| Ceanglaiche Cuir-a-steach LTC | Neutrik™ measgachadh 3-phrìne XLR agus boireann 1/4” TRS |
| Ceanglaichean Toraidh LTC | Neutrik™ 3-phrìne XLR Fireann |
| Vol Obrachaidhtage | 5 VDC USB-C or 48 VDC PoE |
| Caitheamh cumhachd | TBA |
| Teòthachd Obrachaidh. | TBA |
| Meudan (HxWxD) | 1.72 x 7.22 x 4.42 a-staigh [43.7 x 183.5 x 112.3 mm] |
| Cuideam | 1.2 lb. [0.54 kg] |
| Cuideam luingeis | 1.4 lb. [0.64 kg] |
FIOSRACHADH BARANTAS LIMITED
Tha innealan cuairteachaidh dàta ProPlex air am barantas le TMB an aghaidh stuthan uireasbhaidh no obair-obrach airson ùine de dhà (2) bliadhna bhon cheann-latha reic tùsail le TMB. Bidh barantas TMB air a chuingealachadh ri càradh no ath-nuadhachadh pàirt sam bith a tha uireasbhuidh agus a thèid tagradh a chuir a-steach gu TMB mus tig na h-amannan barantais iomchaidh gu crìch.
Tha am barantas cuibhrichte seo falamh ma tha easbhaidhean an toraidh mar thoradh air:
- Fosgladh an còmhdach, càradh no atharrachadh le neach sam bith ach TMB no daoine le ùghdarras sònraichte le TMB
- Tubaist, droch dhìol corporra, mì-làimhseachadh, no mì-chleachdadh an toraidh.
- Milleadh air sgàth dealanach, crith-thalmhainn, tuil, ceannairc, cogadh, no gnìomh Dhè.
TMB will not assume responsibility for any labor expended, or materials used, to replace and/or repair the Product without TMB’s prior written authorization. Any repair of the Product in the field, and any associated labor charges, must be authorized in advance by TMB. Freight costs on warranty repairs are split 50/50: Customer pays to ship defective product to TMB; TMB pays to ship repaired product, ground freight, back to Customer. This warranty does not cover consequential damages or costs of any kind.
Feumar Àireamh Ùghdarrais Tilleadh Bathar (RMA) fhaighinn bho TMB mus tèid bathar lochtach sam bith a thilleadh airson càradh barantais no nach eil. Airson ceistean mu chàradh, cuir fios gu TMB tro phost-d aig Taic-theicneòlais@tmb.com no cuir fòn gu gin de na h-àiteachan againn gu h-ìosal:
TMB na SA
- 527 Sràid na Pàirce.
- San Fernando, CA 91340
- Na Stàitean Aonaichte
- Fòn: +1 818.899.8818
- TMB RA
- 21 Slighe Armstrong
- Southall, UB2 4SD
Sasainn
- Fòn: +44 (0)20.8574.9700
- You may also contact TMB directly via
- post-d aig Taic-theicneòlais@tmb.com
IOMRADH AITHGHEARR
Cuir fios gu TMB agus iarr tiogaid càraidh agus Àireamh Ùghdarrais Bathar Tilleadh mus cuir thu bathar airson càradh. Bi deiseil airson an àireamh modail, an àireamh sreathach, agus tuairisgeul goirid air adhbhar an tilleadh a thoirt seachad a bharrachd air seòladh luingeis tilleadh agus fiosrachadh conaltraidh. Cho luath ‘s a bhios tiogaid càraidh air a phròiseasadh, thèid an àireamh RMA agus an stiùireadh tilleadh a chur tro phost-d chun neach-conaltraidh air file.
Clearly label any shipping package(s) with ATTN: RMA#. Please return equipment prepaid and in the original packaging whenever possible. DO NOT include cables or accessories (unless advised otherwise). If original packaging is not available, be sure to properly pack and protect any equipment. TMB is not liable for any shipping damage resulting from inadequate packaging by the sender. Freight call tags will not be issued for shipping repairs to TMB, but TMB will pay the freight for return to the customer if the repair qualifies for warranty service. Non-warranty repairs will undergo a quotation process by the technician assigned to the repair. All associated costs for parts, labor and return shipping must be authorized in writing before any work can be completed. TMB reserves the right to use its own discretion to repair or replace product(s) and determine the warranty status of any equipment.
FIOSRACHADH TAIC
LUCHD-OBRACH LOS ANGELES
527 Sràid na Pàirce | San Fernando, CA 91340, Na Stàitean Aonaichte
- Fòn: +1 818.899.8818
- Facs: + 1 818.899.8813 reic@tmb.com
- TAIC TMB 24/7 TECH
- SA / Canada: +1.818.794.1286
- Toll an-asgaidh: 1.877.862.3833 (1.877.TMB.DUDE)
- RA: +44 (0) 20.8574.9739
- Toll an-asgaidh: 0800.652.5418 techsupport@tmb.com
- TAIC TMB 24/7 TECH
SA / Canada: +1.818.794.1286
Toll an-asgaidh: 1.877.862.3833 (1.877.TMB.DUDE) - RA: +44 (0) 20.8574.9739
- Toll an-asgaidh: 0800.652.5418
- techsupport@tmb.com
Companaidh seirbheis iomlan a ’toirt seachad taic theicnigeach, seirbheis teachdaiche, agus obair leanmhainn.
Providing products and services for the industrial, entertainment, architectural, installation, defense, broadcast, research, telecommunications, and signage industries. Los Angeles, London, New York, Toronto, Riga and Beijing.
Effective 11 July 2025. © Copyright 2025, TMB. All rights reserved
Ceistean Cumanta
Q: Are spare screws available for the RackMount Kit?
A: Yes, spare screws are available from TMB if needed. Contact customer support for assistance with spare parts.
Sgrìobhainnean/Goireasan
 |
ProPlex CodeBridge TimeCode Or Midi Over Ethernet [pdfLeabhar-làimhe an neach-cleachdaidh CodeBridge TimeCode Or Midi Over Ethernet, CodeBridge, TimeCode Or Midi Over Ethernet, Midi Over Ethernet, Over Ethernet, Ethernet |