INTERMATIC - letšoaoST01/ST01K/EI600
Sebali sa In-Wall se nang le Astro kapa Countdown Feature
Tlhophiso le Bukana ea Mosebelisi
Libertyville, Illinois 60048
www.intermatic.com

Litaba pata
1 LIEKETSENG
2 TŠIRELETSO KAROLO
3 TEBELLO SEBAKA
4 TLHALOSO EA SEHLAHISOA
5 LINTLHA TSA BOHLOKOA
6 LIEKETSENG PELE
7 TS'ELISO
8 KEKETSO
9 PHETHA MOKHOA
10 HO BATLE PHOSO
11 TIISETSO MOEKETSI
12 Litokomane / Lisebelisoa
12.1 Litšupiso
13 Related Posts

LIEKETSENG

ST01/ST01K EI600
Tshebetso Voltage 120-277 VAC, 50/60 Hz
E hanyetsanang
(heater) I		 15 A' 120-277VAC 20 A,120-277 VAC
Tungsten (e khanyang) 115A,120 VAC; 6 A, 208-277 VAC
Ballast (fluorescent) 1 8 A,120 VAC;
4A, 208-277 VAC		 16 A,120-277 VAC
Ballast ea elektroniki (LED) 5 A 120 VAC; 2 A 277 VAC
Load Rating I (Motoroi) 1 HR 120 VAC; 2 HR 240 VAC
Meroalo ea DC I 4 A,12 VDC; 2 A, 28 VDC
Mocheso oa ho sebetsa 132°
F ho isa ho 104° F (0° C ho isa ho 40° C)
Litekanyo i 4 1/8″ H x 1 3/4″ W x 1 1316″ D
Lehlakore ha le Hlokeha

TŠIRELETSO KAROLO

TLHOKOMELO
Kotsi ea Mollo kapa Tšhiso ea Motlakase

  • Hakolla motlakase ho (li)sekhechana sa potoloho kapa u hakolle li-switches pele u kenya kapa u sebeletsa (ho kenyeletsoa le ho khutlisa betri).
  • Ho kenya le/kapa likhoele li tlameha ho tsamaellana le litlhoko tsa khoutu ea naha le ea lehae.
  • Sebelisa li-conductor tsa KOPO FEELA.
  • Se ke oa nchafatsa, oa qhaqholla, mocheso o ka holimo ho 212° F (100° C), oa pshatla, kapa oa chesa betri ea Lithium. Boloka moo bana ba ka fihlang teng.
  • Tlosa betri ka Mofuta oa CR2 feela o netefalitsoeng ke
    Li-Underwriters Laboratories (UL).
  • SE KE UA sebelisa sebali ho laola lisebelisoa tse ka bang le litlamorao tse kotsi ka lebaka la nako e sa nepahalang, joalo ka: sun l.amps, saunas, heaters, cookers butle, joalo-joalo.

TSEBISO

  • Latela likhoutu tsa motlakase oa lehae nakong ea ho kenya.
  • Kotsi ea tšenyo ea nako ka lebaka la ho lutla haeba betri e fokolang e sa nkeloe sebaka hang-hang.
  • Lahla sehlahisoa ho latela melaoana ea lehae bakeng sa ho lahla libeteri tsa Lithium.

TEBELLO SEBAKA

INTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - sebali-nako

TLHALOSO EA SEHLAHISOA

Li-timers tsa ST01 le EI600 li kopanya kemiso, le likarolo tsa ho bala ho etsa yuniti e le 'ngoe e bonolo ho e kenya. Likarolo li kenyelletsa lenaneo la matsatsi a 7 le phetoho ea boikhethelo ea Automatic Daylight Saving Time (DST), libaka tse 40 tse fumanehang tsa liketsahalo bakeng sa ho aha motsoako ofe kapa ofe oa liketsahalo tse reriloeng (Mafube, Mantsiboea kapa linako tse itseng), karolo ea RAND (e sa reroang) e sebelisetsoang ho thibela baeti ba sa batleheng, ho fana ka monyetla. “u phathahane” sheba ha u le sieo, le tse ling. The TOWN (countdown) tshebetso e etselitsoe ho tima lisebelisoa Off ka mor'a hore e kenngoe, ho tloha motsotsoana o le mong ho isa ho lihora tse 24, 'me e lumellana le incandescent, fluorescent, CFL le LED. ST01/EI600 e khona ho sebetsana le mefuta e mengata ea mojaro, ha e hloke khokahanyo ea mohala e sa nke lehlakore, 'me e tšehetsa lipuo tse tharo, Senyesemane (ENG), Sepanish (SPAN), le Sefora (FRN), e leng se etsang hore e be se loketseng bakeng sa likopo tse ngata.

LINTLHA TSA BOHLOKOA

Ka kopo bala lintlha tsena pele u tsoela pele.

  • Sebala nako se sebetsa ka betri mme ha se hloke matla a AC bakeng sa ho seta le ho etsa mananeo; e boetse e laola ts'ebetso ea ON / OFF ("ho tobetsa" molumo) mme e boloka nako le letsatsi.
  • BATT LOW e benya pontsheng ha matla a betri a le tlase.
  • Ha o chencha betri, qala ka ho tlosa motlakase oa AC.
    Hang ha betri ea khale e tlositsoe, u tla ba le metsotso e seng mekae ea ho kenya betri e ncha pele letsatsi le nako li lahleha. Litlhophiso tse ling kaofela li tla lula li le mohopolong, ntle le betri kapa matla a AC.
  • AUTO (automatic) le mefuta ea RAND (random) ha e hlahe likhethong tsa menyetla ho fihlela bonyane ketsahalo e le 'ngoe ea HO BONAHALA kapa HO TLOA e kentsoe.
  • Menu eohle "loop" (pheta likhetho qetellong ea menu). Ha o le ho MENU e itseng, tobetsa ON/OFF ho ​​kena ka har'a MENU eo.
  • Likonopo tsa + kapa - li fetola se benyang skrineng.
    Li tšoare fatše ho tsamaisa kapele.
  • Ts'ebetso ea ho bala (tlase) e lumella basebelisi ho etsa qeto pakeng tsa ho beha temoso ea ho koala metsotso e 3 (temoso) kapa ho tima TEMOSO (temoso).

LIEKETSENG PELE

Pele o kenya lenaneo, kenya betri e fanoeng.

  • Gently pry open the access door, located below ON/OFF button, and remove the battery tray from the timer. (Batla YouTube video for “ST01 Programmable  Timer Battery Replacement”)
  • Beha betri ea CR2 eo u e filoeng ka tereing. Etsa bonnete ba hore o tsamaisana le matshwao a + le – a betri le tereing. Kenya terei ho sebali sa nako.
  • Sehlahisoa se qala ebe se kenya MAN (manual) MODE ea ts'ebetso ha nako e benya ka 12:00 am.
    Hlokomela: Haeba skrineng e sa bonese ka 12:00 hoseng, hlahloba/ fetola betri pele o tsoela pele.

TS'ELISO

Latela mehato ena bakeng sa ho seta le ho etsa mananeo a nako ea letoto la ST01 le EI600.
Fektheri Reset Nako

  1. Tobetsa 'me u hatelle ON/OFF (tsoela pele u tšoara ho fihlela mohato oa 3)
  2. U sebelisa sekotwana sa pampiri kapa pene, tobetsa ebe u lokolla konopo ea RESET.
  3. Ha u bona INIT skrineng, lokolla konopo ea ON/OFF PRO-TIP: Khetho ea lipuo ke ENG (Senyesemane), FRN (French), le SPAN (Spanish)
  4. Sebedisa + kapa – ho kgetha puo eo o e batlang
  5. Tobetsa ON/OFF ho ​​netefatsa
  6. Sebelisa + kapa - ho khetha tšebetso ea sebali-nako seo u batlang ho se sebelisa
    a. Ts'ebetso ea nako ea STD (E tloaelehileng) (nako ea ho tima le ho tima)
    b. TLASE (Countdown) sebali sa nako
  7. Tobetsa ON/OFF ho ​​netefatsa

Mohato o Latelang:

  • Bakeng sa Ts'ebetso e Tloaelehileng (STD): 12: 00 am e tla benya e bonts'a MAN ka mor'a Factory Reset; ho lenaneo, ea ho "Initial Setup."
  • Bakeng sa Ts'ebetso ea Countdown (TLASE), skrini se tla bonts'a HO TLOA; ho lenaneo, ea ho "COUNTDOWN OPERATION ONLY."

TŠEBELETSO E TLANG FEELA Setupo sa Pele

INTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - ponts'o

  1. Tobetsa konopo ea MODE ho fihlela u bona SETUP skrineng
  2. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  3. Sebelisa + kapa - ho beha nako ea hona joale ea letsatsi HOUR (etsa bonnete ba hore AM kapa PM ea hau e nepahetse)
  4. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  5. Sebelisa + kapa - ho seta nako ea hajoale ea letsatsi MINUTE
  6. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  7. Tobetsa + kapa - ho seta YEAR ea hajoale
  8. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  9. Tobetsa + kapa - ho seta MONTH ea hajoale
  10. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  11. Tobetsa + kapa - ho seta DATE ea hajoale
  12. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  13. Netefatsa hore e bontša LETSATSI le nepahetseng la BEKE (kajeno)
  14. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  15. Tobetsa + kapa - ho khetha hore na sebali se tla ikamahanya le NAKO EA HO BOLOKA LETSATSI (DST) nakong ea selemo le hoetla.
    a. AUTO e bolela hore e tla ikamahanya le maemo
    b. HO TLOHA ho bolela hore e ke ke ea fetohaINTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - ponts'o ea 2
  16. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  17. Tobetsa + kapa - ho khetha TIME ZONE ea hau
    a. Alaska (AKT), Atlantic (AT), Bohareng (CT) (default), Bochabela (ET), Hawaii (HT), Mountain (MT), Newfoundland (NT), Pacific (PT))
  18. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  19. Tobetsa + kapa - ho khetha NAHA ea hau (CTRY) a. USA (ea kamehla), Mexico (MEX), Canada (CAN)
  20. Tobetsa konopo ea ON/OFF ho ​​netefatsa
    KELETSO: Sheba khoutu ea QR tlas'a lintlha tsa tiisetso bakeng sa chate ea latitude le longitude.
  21. Tobetsa + kapa - konopo ho khetha LATITUDE ea hau (LAT)
  22. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  23. Tobetsa + kapa - konopo ho khetha LONGITUDE ea hau (LONG)
  24. Tobetsa konopo ea ON/OFF ho ​​netefatsa PRO-TIP: U na le khetho ea ho "Offset" litlhophiso tsa Mantsiboea le Meso ho tloha metsotsong e 0 ho isa ho e 99.
  25. Tobetsa + kapa - konopo ho lokisa nako ea hona joale ea DAWN (o ka kenyelletsa offset mona).
    INTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - ponts'o ea 3
  26. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  27. Tobetsa + kapa - konopo ho fetola nako ea hona joale ea DUSK (o ka kenyelletsa offset mona).
  28. Tobetsa konopo ea ON/OFF ho ​​netefatsa (Joale u tla bona nako ea hau ea hajoale le SETUP) - Tsoelapele ho Setupo sa Lenaneo

Lenaneo la Setupo
PRO-TIP: Pele ho Setupong se Tloaelehileng sa Lenaneo, o tla hloka ho tseba hore na ke mofuta ofe oa kemiso e lumellanang le kopo ea hau ho tsoa lenaneng le ka tlase.
T1= Setšoantšo sa 1 - E buletsoe ka DUSK. Ho tloha ha Dawn
T2= Setšoantšo sa 2 – E buletsoe ka DUSK. Tloha ka 10:00 PM
T3= Setšoantšo sa 3 – E buletsoe ka DUSK. Tloha ka 10:00 PM.
Ka 5:00 AM. Ho tloha ha Dawn.
Nako e khethehileng - ON/OFF

  1. Tobetsa konopo ea MODE ho fihlela u bona PGM skrineng.
  2. Tobetsa konopo ea ON/OFF ho ​​kenya lenane la mananeo.

Tsoela pele ho "Programming Template Events" kapa "Programming Specific Events".
Liketsahalo tsa Template ea Programming
KELETSO: Li-templates li behiloe bakeng sa matsatsi ohle qalong.

  1. Ha o qala ho kenya menu ya PGM tobetsa + kapa - ho kgetha thempleite.
  2. Tobetsa konopo ea ON/OFF template eo u lakatsang ho e sebelisa
  3. Mohato oa ho qetela ke ho tobetsa MODE ho khetha AUTO ho RAND (ka tšohanyetso).
    INTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - ponts'o ea 4

Liketsahalo tse Khethehileng tsa Lenaneo
PRO-TIP: U tla hloka bonyane liketsahalo tse 2 (e le 'ngoe bakeng sa ON le e' ngoe bakeng sa OFF)

  1. Ha o qala ho kenya lenane la PGM, tobetsa konopo ea + kapa - ho fetela ketsahalong ea # 01.
  2. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  3. Tobetsa + kapa - ho khetha hore na sena e tla ba ketsahalo ea HO BONAHALA kapa HO TLOA
  4. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  5. Tobetsa + kapa - ho khetha hore na sena e tla ba ketsahalo ea DAWN, DUSK kapa Specific Time (nako e khethehileng e tla ba le nako e khanyang)
  6. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  7. Bakeng sa Nako e Kgethehileng: Tobetsa + kapa - ho seta hora eo u e batlang (etsa bonnete ba hore AM kapa PM e nepahetse)
  8. Tobetsa konopo ea ON/OFF ho ​​netefatsa lihora
  9. Tobetsa + kapa – ho seta metsotso
  10. Tobetsa konopo ea ON/OFF ho ​​netefatsa Tobetsa + kapa - konopo ho khetha letsatsi kapa sehlopha sa matsatsi ao u batlang hore ketsahalo ena e etsahale.
    INTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - ponts'o ea 5KELETSO:
    KAOFELA- matsatsi ohle a supileng a beke Letsatsi la Motho ka Mong- khetha: SUN, MON, TUE, WED,
    THU, FRI kapa SAT
    MF- Mantaha ho fihlela Labohlano
    WKD- Moqebelo le Sontaha
  11. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  12. Haeba o hloka ho seta ketsahalo e 'ngoe, Tobetsa konopo ea + ho fetela ketsahalong e latelang ebe u pheta mehato ho qala mohato oa 2.
  13. Ha o qetile ho kenya diketsahalo, Tobetsa konopo ya MODE ho fetela ho AUTO (automatic) kapa RAND (random) MODE.

EDISA, TLALALA, HLAKOLA LIKETSAHALO TSE TLOANG

  1. Tobetsa MODE ho fihlela PGM e hlaha pontshong.
  2. Tobetsa ON/OFF ho ​​netefatsa.
  3. Tobetsa + kapa - ho khetha EDIT kapa HLAKOLA
    a. EDIT e tla u lumella ho etsa liphetoho ho kemiso pele ho mohato oa #4
    b. ERASE e tla hlakola liketsahalo TSOHLE tse reriloeng.
    - Haeba u khetha ERASE, tobetsa ON/OFF ho ​​netefatsa, 'me u tsoele pele ho
    LIKETSAHALO TSA MAEMO A LENANEO ho(li)diketsahalo tsa lenaneo, kapa tobetsa MODE ho ea ho MAN (Manual).
  4. Tobetsa ON/OFF ho ​​netefatsa
  5. Tobetsa konopo ea + ho fumana nomoro ea ketsahalo eo u batlang ho e hlophisa, ho Tlola kapa ho Hlakola (ERAS).
  6. Tobetsa ON/OFF ho ​​netefatsa.
  7. Tobetsa konopo ea + ho khetha e 'ngoe ea likhetho tse ka tlase.
    a. ON - The timer e tla bulela ka nako ena.
    b. TIMA - Sebali se tla tima ka nako ena.
    - Haeba u khethile HO BONAHALA kapa HO TLOA, ka kopo khutlela Mothating oa #5 tlas'a "PROGRAMMING TIMES Specific"
    c. SKIP - Sena se tla pata kapa sa feta ketsahalo ena eo o ka ratang ho e sebelisa hamorao. Sebali sa nako se tla iphapanyetsa liketsahalo life kapa life tse "tlotsoeng". Sena se thusa bakeng sa litlhoko tse sa tloaelehang tsa mananeo, joalo ka litlhophiso tsa matsatsi a phomolo.
    d. ERAS (hlakola) - Sena se tla hlakola ketsahalo e khethiloeng.
    - Haeba u khethile SKIP kapa ERASE u ka tsoela pele ho Mohato oa #5 tlas'a "PROGRAMMING Specific EVENTS" kapa Tobetsa MODE ho khutlela ho AUTO, RAND (random) kapa MAN (manual).
    INTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - ponts'o ea 6

COUNTDOWN OPERATION FEELA Countdown Setup
KELETSO: Nako e tla tsamaea kapele ha u ntse u tšoara konopo.

  1. Sebelisa konopo ea + kapa - ho seta nako eo u e balang ka nako eo u e batlang.
    INTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - ponts'o ea 7
  2. Tobetsa konopo ea ON/OFF ho ​​netefatsa
  3. Tobetsa 'me u tšoare likonopo tsa MODE le ON/OFF 'me u tšoare metsotsoana e 5. Pontšo e tla bontša menu ea WARN (temoso).
  4. Tobetsa + kapa - ho khetha FLASH kapa TIMA.
    a. E timiloe - ts'ebetso ea temoso e timiloe.
    b. Flash - ha timer e fihla metsotso e 3 pele e koala, e tla khantša mabone a laoloang (kapa potoloho e 'ngoe) bakeng sa 1 motsotsoana. Letšoao la "sunburst" le tla hlaha skrineng
    INTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - ponts'o ea 8
  5. Tobetsa konopo ea MODE ho netefatsa
  6. Tobetsa + kapa - ho khetha khetho e lakatsehang LOCK.
    a. Ha ho letho - ha ho ts'ebetso ea ho notlela e behiloeng.
    b. Emisa khefu - basebelisi ba ke ke ba sebelisa mosebetsi oa Pause ho emisa nako ea ho bala nako.
    c. Nako - basebelisi ba ka nchafatsaview empa eseng ho fetola nako. Basebelisi ba ka fetola nako ea ho bala e ntseng e tsoela pele empa ba se ke ba feta litlhophiso tse notletsoeng tsa ho koala.
    d. Tsohle - khefutso le ho seta kapa ho fetola litlhophiso tsa ho koala sebali ho notletsoe.
  7. Tobetsa konopo ea MODE ho netefatsa, ponts'o e tla hlaha

Fetola Nako ea ho Bala
KELETSO: Haeba sebali se le ho LOCK MODE, o kanna oa sitoa ho etsa liphetoho nakong e behiloeng.
Ho qala kapa ho emisa ho bala, tobetsa ON/OFF konopo.
Ho emisa nako ea ho bala, tobetsa konopo ea Mode.

  1. Tobetsa konopo ea ON/OFF ho ​​fihlela skrini se hlaha
  2. Tobetsa 'me u tšoare konopo ea + kapa - ho seta nako eo u e balang fatše eo u e batlang.

Malebela a Ts'ebetso a Countdown

  • Ho lekola Sebapa-nako - Tobetsa konopo ea + kapa - ho lekola tlhophiso ea nako. Pontšo e bonts'a tlhophiso ea nako bakeng sa metsotsoana e 2.
  • Ho Seta Nako ha ho notletsoe - Ho notlolla sebali sa nako, ka kopo sheba karolo ea Countdown Setup.
  • Sebapa-nako ha se sa notleloa - Ha sebali sa nako se SA TLOHELETSOA, mosebelisi a ka fetola litlhophiso tsa nako, empa o tlameha ho tima sebali pele a lokisa.
  • Ho Khetsa Nako e Baloang - Ha sebali sa nako se SA notleloa, tobetsa konopo ea MODE ho khefutsa nako e ntseng e tsoela pele.
    Emisa mekoallo ea flash ha palo e ntse e tsitsitse. Tobetsa MODE hape ho tsoela pele ho bala ho theoha kapa tobetsa konopo ea ON/OFF ho ​​tima moroalo.
  • Ho khutsufatsa kapa ho lelefatsa Palo e ntseng e tsoela pele
    — Ho fetola palo e setseng e ntseng e tsoela pele, tobetsa 'me u tšoare konopo ea + kapa - kapa konopo ea ON/OFF ho ​​fihlela ponts'o e bontša tlhophiso ea nako eo u e batlang bakeng sa potoloho ena feela.
    Ha sebali sa nako se qala potoloho ea sona e latelang, nako ea ho bala e tla khutlela ho litlhophiso tse hlophisitsoeng.
  • Ha u notletsoe u ka eketsa nako ea nako ho ea ho palo e phahameng ea nako e behiloeng.
  • Ho sebelisa Remote Switch ka 3-Way - Ha u laola sebali sa nako ka sesebelisoa se hole, fetola sesebelisoa se hole hang ho bulela kapa ho tima.

KEKETSO

PRO-TIP: Ha o kenya sebali sa nako ka mokonteraka kapa mojaro oa enjene, ho khothaletsoa sefahla sa lerata (ET-NF). Example ea palo e le 'ngoe le litsela tse tharo wiring latela. Bakeng sa maemo a mang a litsela tse tharo tsa wiring, ea ho www.intermatic.com.
Tlosa motlakase phanele ea tšebeletso.

  1. Tlosa li-switches tsa lebota, haeba ho hlokahala.
  2. Hlakola likhoele tse teng ho 7/16”.
  3. Kenya sebali sa nako ka lebokoseng la lebota.

Wiring e le 'ngoeINTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - mohala

A Black - E hokela terata e chesang (e ntšo) e tsoang Mohloling oa Matla
B Blue - E hokahanya terata e 'ngoe (e ntšo) ho tloha mojaro
C Khubelu - Khoele ena ha e sebelisoe lits'ebetsong tsa switjha e le 'ngoe.
Cap e nang le sehokedi sa twist
D Botala - E hokahanya le mobu o fanoeng

Tsela e meraro ea Wiring
PRO-TIP: Sebaka se pakeng tsa sebali sa nako le sesebelisoa se hole ha sea lokela ho feta maoto a 100.
Wiring e bontšitsoeng ka tlase ke ea sebali sa nako se nkelang switch ea litsela tse tharo lehlakoreng la mola. INTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - line 2

A Black Connect ho tswa ho "COMMON" - terata e tlositswe
terminal ea switjha e nkeloa sebaka
I Blue - Hokela ho e 'ngoe ea likhoele tse tlositsoeng ho switjha e nkeloang sebaka. Rekota 'mala oa terata o hokahaneng le terata e putsoa bakeng sa ho sebelisoa nakong ea ho kenya lehlakoreng la mojaro
Red - Hokela terata e setseng e tlositsoeng ho eona
switjha e nkeloa sebaka. Rekota 'mala oa terata o hoketsoeng terateng e khubelu bakeng sa ho sebelisoa nakong ea ho kenya lehlakoreng la mojaro
D Botala - Hokela mobung o fanoeng
E Jumper Wire -Ho sesebelisoa se seng sa litsela tse tharo, kenya terata ea jumper e fanoeng pakeng tsa terata ea B le terminal e tloaelehileng.

PHETHA MOKHOA

  1. Etsa bonnete ba hore li-twist-on wire nuts li bolokehile, ebe u kenya lithapo ka har'a lebokose la lebota la sebali, u siee sebaka sa sebali-nako.
  2. U sebelisa li-screws tse fanoeng, boloka nako ho lebokose la lebota.
  3. Koahela sebali sa nako ka lebota la lebota 'me u sireletse u sebelisa lisekere tse fanoeng.
  4. Bakeng sa li-wiring tse tharo, kenya sesebelisoa sa remote ka lebokoseng la lebota.
  5. Kenya wall plate 'me u sireletsehe.
  6. Hokela hape motlakase phaneleng ea litšebeletso.

Ho Lekola Nako
Etsa bonnete ba hore sebali se hlahisa MAN (manual) MODE nakong ea teko
Teko ea Wiring e le 'Ngoe
Ho lekola sebapala nako, tobetsa TULA/TLOA makhetlo a mangata. Nako e lokela ho "tobetsa" 'me Lebone le laoloang kapa sesebelisoa (mojaro) se lokela ho BUA kapa HO TLOA.
Teko ea Wiring ea Mekhoa e meraro

  1. Ho lekola sebali sa nako, leka ka sesebelisoa sa remote sebakeng se seng le se seng sa maemo a sona a mabeli.
  2. Tobetsa ON/OFF makhetlo a mangata. Sebali se lokela ho "tobetsa" 'me lebone le laoloang kapa sesebelisoa (mojaro) se lokela ho BUA kapa HO TLOA.
  3. Haeba sebali sa nako se tobetsa, empa mojaro ha o sebetse:
    a. Tlosa motlakase phanele ea tšebeletso.
    b. Hlahloba hape wiring mme o netefatse hore mojaro o sebetsa.
    c. Hokela hape motlakase phaneleng ea litšebeletso.
    d. Hlahloba hape.
  4. Haeba timer e tobetsa, empa mojaro o sebetsa feela ha sesebelisoa se hole se le ho e 'ngoe ea maemo a eona a mabeli, pheta Mohato oa 3, papatso, empa fapanyetsana lithapo tse peli tsa moeti (lithapo Pakeng tsa sebali sa nako le sesebelisoa se hole sa litsela tse tharo) se hokahaneng le bofubelu le. lithapo tsa nako e putsoa PRO-TIP: Ikopanye le setsebi sa motlakase se tšoanelehang haeba sesebelisoa le sebali sa nako se sa sebetse kamoo se reriloeng kateng.
  5. Ha sebali sa nako se "tobetsa" 'me sesebelisoa se laoloang se BUA le HO TLOA joalokaha se reriloe, sebali sa nako se kentsoe ka katleho!

HO BATLE PHOSO

Hlokomela: : Bakeng sa malebela a mang a ho rarolla mathata, ikopanye le Intermatic Technical Support ho: 815-675-7000.

E shebiloe Bothata Lebaka le ka khonehang  Se o lokelang ho se etsa
Pontšo ea nako ha e na letho, 'me sebali ha se "tobe" ha u leka ho se bulela kapa ho se tima. • Betri ha e yo
• Betri ha e lefelloe
• Betri e kentsoe ka phoso		 • Kenya betri
• Tlosa betri
• Etsa bonnete ba hore betri e kentswe ka nepo.
Sebali sa nako ha se ON/OFF empa ponts'o e shebahala e tloaelehile • Sebali sa nako ha sea behoa ho AUTO, RAND, kapa MAN MODE
• Betri e tlase 'me e hloka ho nchafatsoa		 • Tobetsa MODE ho kgetha MODE ya tshebetso eo o batlang ho e sebedisa
• Tlosa betri
Sebapa-nako se khutletse ho 12:00 • Timer e kenngoa hammoho le mochine oa motlakase kapa motlakase. • Kenya mochini o hloekisang lerata (ET-NF) mohloling oa lerata
Sebali se ke ke sa kenya AUTO kapa RAND mode ha "MODE" e tobetsoa • Ha ho kemiso e khethiloeng • Tsoela pele ho "Programming Standard
Karolo ea Liketsahalo
Sebali se sebetsa ka linako tse fosahetseng, kapa se tlola linako tse hlophisitsoeng tsa EVENT • Kemiso e sebetsang e na le liketsahalo tse hanyetsanang kapa tse fosahetseng
• Betri e kanna ea fokola.
• Sebala nako se maemong a RAND, 'me linako tse fetohang li fihla ho +/- metsotso e 15		 • Review liketsahalo tse hlophisitsoeng, ntlafatsa
ha ho hlokahala.
• Tlosa betri.
• Khetha "Auto Mode"
Mojaro o sebetsa feela ha: switjha e hole (ka tsela tse tharo) e le sebakeng se le seng, kapa sebali sa nako se iphapanyetsa switch ea remote. • Sesebelisoa sa remote ha se na mohala o fosahetseng. • Hlahloba hape mohala, haholo-holo bakeng sa jumper
Sebali sa nako se iphapanyetsa sesebelisoa sa remote sa litsela tse tharo leha se hokeletsoe ka nepo, kapa mojaro oa tima hang ka mor'a hore o butsoe. • Switjha ya remoutu kapa sebala nako se kentswe ka terata
ka tsela e fosahetseng.
• Ho na le bolelele bo feteletseng ba terata (ho feta maoto a 100).
• Remoutu switch ha e sebetse hantle kapa e fedile.		 • Ikopanye le ramotlakase ea koetlisitsoeng
Terei ea betri e thata ho e khutlisa. • Betri ha e lutse ka tereing
• Terei ha e shebahale hantle
• Li-tab tsa mabitso ka tereing li kobehile		 • Beha betri ka tereing, ebe o e kenya hape.

TIISETSO MOEKETSI

Tšebeletso ea tiisetso e fumaneha ka (a) ho khutlisetsa sehlahisoa ho morekisi eo yuniti e rekiloeng ho eena kapa (b) ka ho tlatsa tleleime ea tiisetso inthaneteng ho
https://www.intermatic.com/Support/Warranty-Claims. Tiisetso ena e entsoe ke: Intermatic Incorporated, 1950 Innovation Way, Suite 300, Libertyville, IL 60048. Bakeng sa boitsebiso bo eketsehileng ba sehlahisoa kapa tiisetso e ea ho: http://www.Intermatic.com kapa letsa 815-675-7000, MF 8AM ho isa 4:30pm

Ka kopo, hlahloba khoutu ea QR bakeng sa chate ea longitude le latitude

INTERMATIC ST01 In Wall Timer e nang le Astro kapa Countdown Feature - qr khoutuhttps://l.ead.me/bcrVyB

Litokomane / Lisebelisoa

INTERMATIC ST01 Ka Wall Timer e nang le Astro kapa Countdown Feature [pdf] Bukana ea Mosebelisi
ST01 In Wall Timer e nang le Astro kapa Countdown Feature, ST01, In Wall Timer e nang le Astro kapa Countdown Feature, kapa Countdown Feature, Countdown Feature

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *