INTERMATIC - logoST01/ST01K/EI600
Mu-Wall Timer ine Astro kana Countdown Feature
Installation uye User Guide
Libertyville, Illinois 60048
www.intermatic.com

Zviri mukati hide
1 RATINGS
2 CHIKAMU CHEKUCHENGETEKA
3 TIMER INTERFACE
4 PRODUCT DESCRIPTION
5 MAZANO ANOKOSHA
6 KUFANIRA KUISA
7 KURONGWA
8 INSTALLATION
9 KUPEDZA INSTALLATION
10 KUTAMBUDZA
11 LIMITED WARRANTY
12 Zvinyorwa / Zvishandiso
12.1 References
13 Related Posts

RATINGS

ST01/ST01K EI600
Kushanda Voltage 120-277 VAC, 50/60 Hz
Resistive
(heater) I		 15 A' 120-277VAC 20 A,120-277 VAC
Tungsten (incandescent) 115A,120 VAC; 6 A, 208-277 VAC
Ballast (fluorescent) 1 8 A,120 VAC;
4A, 208-277 VAC		 16 A,120-277 VAC
Electronic Ballast (LED) 5 A 120 VAC; 2 A 277 VAC
Load Rating I (Motor) 1 HR 120 VAC; 2 HR 240 VAC
DC Mitoro I 4 A,12 VDC; 2 A, 28 VDC
Operating Temperature 132°
F kusvika 104° F (0° C kusvika 40° C)
Dimensions i 4 1/8″ H x 1 3/4″ W x 1 1316″ D
Kusarerekera Hakudiwi

CHIKAMU CHEKUCHENGETEKA

YAMBIRO
Ngozi yeMoto kana Magetsi Shock

  • Bvisa magetsi pacircuit breaker(s) kana kubvisa switch(es) usati waisa kana kusevhisi (kusanganisira kutsiva bhatiri).
  • Kuiswa uye / kana wiring kunofanirwa kuenderana nenyika uye yemunharaunda yemagetsi kodhi zvinodiwa.
  • Shandisa maconductor COPPER CHETE.
  • Usachajazve, disassemble, kupisa pamusoro pe212° F (100° C), kupwanya, kana kupisa bhatiri reLithium. Chengetedza pasingasvikirwi nevana.
  • Tsiva bhatiri neType CR2 chete iyo inosimbiswa ne
    Underwriters Laboratories (UL).
  • USASHANDISA timer kudzora zvishandiso zvinogona kuve nenjodzi nekuda kwekutadza kuita nguva, senge: zuva l.amps, saunas, heaters, slow cookers, etc.

CHIZIVISO

  • Tevera makodhi emagetsi emunharaunda panguva yekuisa.
  • Ngozi yekukuvadzwa nenguva nekuda kwekudonha kana bhatiri risina kusimba rikasatsiviwa nekukasira.
  • Rasa chigadzirwa maererano nemitemo yemuno yekurasa mabhatiri eLithium.

TIMER INTERFACE

INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - timer

PRODUCT DESCRIPTION

Iyo ST01 uye EI600 yakatevedzana nguva inosanganisa kuronga, uye kuverenga-down maficha kuita imwe yakapfava-kuisa-kuisa unit. Zvimiro zvinosanganisira 7-day programming ine sarudzo yeOtomatiki Daylight Saving Time (DST) gadziriso, makumi mana anowanikwa nzvimbo dzezviitiko zvekuvaka chero musanganiswa wezviitiko zvakarongwa (Mambakwedza, Kudoka kana Nguva Yakajeka), RAND (random) chinhu chinoshandiswa kudzivirira vashanyi vasingadiwe, kupa “kubatikana” tarisa paunenge usipo, nezvimwe. Iyo PASI (countdown) basa rakagadzirirwa kushandura zvishandiso Off mushure mekuita activation, kubva pasekondi imwe kusvika kumaawa makumi maviri nemana, uye incandescent, fluorescent, CFL uye LED inoenderana. Iyo ST40/EI24 inokwanisa kubata marudzi akawanda emutoro, haidi kubatanidzwa kwewaya isina kwayakarerekera, uye inotsigira mitauro mitatu, Chirungu (ENG), Spanish (SPAN), uye French (FRN), zvichiita kuti ive yakakodzera kune akawanda maapplication.

MAZANO ANOKOSHA

Ndapota verenga zvinyorwa izvi usati waenderera mberi.

  • Iyo timer ine bhatiri-powered uye haidi AC simba rekutanga kuseta uye hurongwa; iyo zvakare inodzora iyo ON / OFF basa ("kudzvanya" ruzha) uye inochengetedza nguva uye zuva.
  • BATT LOW inopenya pachiratidziro kana simba rebhatiri rakaderera.
  • Pakutsiva bhatiri, tanga wabvisa simba re AC.
    Kana bhatiri rekare rabviswa, unenge uine maminetsi mashoma ekuisa bhatiri idzva zuva uye nguva zvigadziriso zvisati zvarasika. Mamwe ese magadzirirwo acharamba ari mundangariro, pasina bhatiri kana AC simba.
  • AUTO (otomatiki) uye RAND (random) mamodhi haaonekwe mune menyu sarudzo kudzamara imwe chete ON kana OFF chiitiko charongwa.
  • Ese mamenu "loop" (dzokorodza sarudzo pamagumo emenyu). Kana uri muMENU chaiyo, dzvanya ON/OFF kuti upinde mukati meMENU iyoyo.
  • Iyo + kana - mabhatani anoshandura zviri kupenya pachiratidziri.
    Vabate pasi kuti vapuruzire nekukurumidza.
  • Countdown (DOWN) basa rinobvumira vashandisi kusarudza pakati pekuisa 3-mineti yekuvhara-kuvharwa yambiro (yambiro) kana kudzima YAMBIRO (yambiro).

KUFANIRA KUISA

Usati wagadzira, isa bhatiri rawakapihwa.

  • Gently pry open the access door, located below ON/OFF button, and remove the battery tray from the timer. (Tsvaga YouTube video for “ST01 Programmable  Timer Battery Replacement”)
  • Isa bhatiri rakapihwa CR2 mutireyi. Ita shuwa yekufananidza iyo + uye - mamaki pabhatiri netireyi. Isa tireyi mune timer.
  • Chigadzirwa chinotanga uye chinopinda muMAN (manual) MODE yekushanda nenguva ichibwaira na12:00 am.
    Cherechedza: Kana chiratidziro chikasapenya 12:00 am, tarisa/chinja bhatiri usati waenderera.

KURONGWA

Tevedza aya matanho ekutanga kuseta uye hurongwa hweiyo ST01 uye EI600 yakatevedzana nguva.
Factory Reset Timer

  1. Dzvanya uye bata ON/OFF (ramba wakabata kusvika nhanho 3)
  2. Uchishandisa bepa clip kana peni, dzvanya uye sunungura bhatani reRESET.
  3. Paunoona INIT pachiratidziro wobva waburitsa bhatani ON/OFF PRO-TIP: Sarudzo yemitauro ENG (Chirungu), FRN (French), uye SPAN (Spanish)
  4. Shandisa + kana - kusarudza mutauro waunoda
  5. Dzvanya ON/OFF kuti usimbise
  6. Shandisa + kana - kusarudza basa renguva raunoda kushandisa
    a. STD (Standard) timer kushanda (pa uye kudzima nguva)
    b. PASI (Countdown) timer
  7. Dzvanya ON/OFF kuti usimbise

Next Danho:

  • For Standard Operation (STD): 12:00 am ichapenya ichiratidza MAN mushure meFactory Reset; kuchirongwa, enda ku "Initial Setup."
  • YeKuverengera Kushanda (PASI), iyo skrini icharatidza OFF; kuchirongwa, enda ku“COUNTDOWN OPERATION ONLY.”

STANDARD OPERATION CHETE Initial Setup

INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - kuratidza

  1. Dzvanya bhatani reMODE kusvika waona SETUP pachiratidziro
  2. Dzvanya bhatani re ON/OFF kuti usimbise
  3. Shandisa iyo + kana - kuseta iyo yazvino nguva yezuva HOUR (ita shuwa kuti AM kana PM yako ndeyechokwadi)
  4. Dzvanya bhatani re ON/OFF kuti usimbise
  5. Shandisa iyo + kana - kuseta nguva iripo yezuva MINUTE
  6. Dzvanya bhatani re ON/OFF kuti usimbise
  7. Dzvanya iyo + kana - kuseta GORE razvino
  8. Dzvanya bhatani re ON/OFF kuti usimbise
  9. Dzvanya + kana - kuseta MWEDZI wazvino
  10. Dzvanya bhatani re ON/OFF kuti usimbise
  11. Dzvanya + kana - kuseta DATE razvino
  12. Dzvanya bhatani re ON/OFF kuti usimbise
  13. Ita shuwa kuti iri kuratidza iro ZUVA reVIKI (nhasi)
  14. Dzvanya bhatani re ON/OFF kuti usimbise
  15. Dzvanya + kana - kuti usarudze kana iyo timer ichagadzirisa kune DAYLIGHT SAVING TIME (DST) muchirimo nekudonha.
    a. AUTO zvinoreva kuti ichagadzirisa otomatiki
    b. KUDZIMA kunoreva kuti haishandukeINTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - ratidza 2
  16. Dzvanya bhatani re ON/OFF kuti usimbise
  17. Dzvanya + kana - kusarudza yako TIME ZONE
    a. Alaska (AKT), Atlantic (AT), Central (CT) (default), Eastern (ET), Hawaii (HT), Mountain (MT), Newfoundland (NT), Pacific (PT))
  18. Dzvanya bhatani re ON/OFF kuti usimbise
  19. Dzvanya + kana - kusarudza NYIKA yako (CTRY) a. USA (default), Mexico (MEX), Canada (CAN)
  20. Dzvanya bhatani re ON/OFF kuti usimbise
    PRO-ZANO: Tarisa kuQR kodhi pasi pewaranti ruzivo rwelatitude uye longitude chati.
  21. Dzvanya + kana - bhatani kuti usarudze yako LATITUDE (LAT)
  22. Dzvanya bhatani re ON/OFF kuti usimbise
  23. Dzvanya + kana - bhatani kusarudza LONGITUDE yako (REFU)
  24. Dzvanya bhatani re ON/OFF kuti usimbise PRO-TIP: Une sarudzo ye "Offset" iyo Dusk uye Dawn marongero kubva 0 kusvika 99 maminetsi.
  25. Dzvanya + kana - bhatani kuti ugadzirise yazvino DAWN nguva (unogona kusanganisira yekubvisa pano).
    INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - ratidza 3
  26. Dzvanya bhatani re ON/OFF kuti usimbise
  27. Dzvanya + kana - bhatani kuti ugadzirise yazvino DUSK nguva (unogona kusanganisira yekubvisa pano).
  28. Dzvanya bhatani re ON / OFF kuti usimbise (Iwe zvino uchaona nguva yako yazvino uye SETUP) - Enderera kuProgramming Setup

Programming Setup
PRO-TIP: Pamberi peStandard Programming Setup, iwe unozofanirwa kuona kuti ndeipi mhando yehurongwa inokodzera application yako kubva pane iri pasi apa.
T1= Template 1 – Yakavhurwa paDUSK. Off at Dawn
T2= Template 2 – On at DUSK. Kubva na10:00 PM
T3= Template 3 – On at DUSK. Kubva na10:00 PM.
Kuma 5:00 AM. Off at Dawn.
Nguva Yakananga - ON / OFF

  1. Dzvanya bhatani reMODE kusvika waona PGM pachiratidziri.
  2. Dzvanya bhatani re ON/OFF kuti uise iyo programming menyu.

Kumberi ku "Programming Template Events" kana "Programming Specific Events".
Programming Template Zviitiko
PRO-ZANO: Matemplate anogadzirirwa mazuva ese pakutanga.

  1. Paunotanga kupinda muPGM menyu dzvanya iyo + kana - kusarudza template.
  2. Dzvanya bhatani re ON/OFF pane template yaunoda kushandisa
  3. Nhanho yekupedzisira ndeyekudzvanya MODE kusarudza AUTO kuenda kuRAND (random).
    INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - ratidza 4

Programming Chaiyo Zviitiko
PRO-TIP: Iwe unozoda mashoma e2 zviitiko (imwe yeON uye imwe ye OFF)

  1. Paunotanga kupinda muPGM menyu, tinya iyo + kana - kufambira mberi kune chiitiko # 01.
  2. Dzvanya bhatani re ON/OFF kuti usimbise
  3. Dzvanya iyo + kana - kusarudza kana ichi chichava chiitiko che ON kana OFF
  4. Dzvanya bhatani re ON/OFF kuti usimbise
  5. Dzvanya iyo + kana - kusarudza kana ichi chichava DAWN, DUSK kana Chaiyo Nguva chiitiko (chaiyo nguva ichave nenguva inopenya)
  6. Dzvanya bhatani re ON/OFF kuti usimbise
  7. Yenguva Yakananga: Dzvanya + kana - kuseta awa yaunoda (ona kuti AM kana PM ndeyechokwadi)
  8. Dzvanya bhatani re ON/OFF kuti usimbise maawa
  9. Dzvanya iyo + kana - kuseta maminetsi
  10. Dzvanya bhatani re ON/OFF kuti usimbise Dzvanya + kana - bhatani kuti usarudze izuva ripi kana boka remazuva raunoda kuti chiitiko ichi chiitike.
    INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - ratidza 5PRO-ZANO:
    ALL- mazuva ose manomwe evhiki Zuva Remunhu- sarudza: ZUVA, MON, TUE, WED,
    THU, FRI kana SAT
    MF- Muvhuro kusvika Chishanu
    WKD- Mugovera neSvondo
  11. Dzvanya bhatani re ON/OFF kuti usimbise
  12. Kana iwe uchida kuseta chimwe chiitiko, Dzvanya bhatani + kuti uenderere mberi kune chinotevera chiitiko uye dzokorora matanho kubva padanho 2.
  13. Kana wapedza kuwedzera zviitiko, Dzvanya bhatani reMODE kuti uenderere mberi kuAUTO (otomatiki) kana RAND (random) MODE.

ONGORA, SKIP, DELETA ZVIITIKO ZVAKAWANDA

  1. Dzvanya MODE kusvika PGM yaonekwa pachiratidziro.
  2. Dzvanya ON/OFF kuti usimbise.
  3. Dzvanya + kana - kusarudza EDIT kana ERASE
    a. EDIT ichakurega iwe uchinje kune hurongwa hwepamberi kuenda kunhanho #4
    b. ERASE ichadzima ESE zviitiko zvakarongwa.
    -Kana ukasarudza ERASE, dzvanya ON/OFF kuti usimbise, uye enda mberi
    PROGRAMMING STANDARD EVENTS kuchirongwa chiitiko(s), kana kudzvanya MODE kuenda kuMAN (Manual).
  4. Dzvanya ON/OFF kuti usimbise
  5. Dzvanya bhatani + kuti uwane nhamba yechiitiko chaunoda Kugadzirisa, Skip kana Kudzima (ERAS).
  6. Dzvanya ON/OFF kuti usimbise.
  7. Dzvanya bhatani + kuti usarudze imwe yesarudzo dziri pazasi.
    a. ON - Iyo timer ichabatidzwa panguva ino.
    b. DZIMA - Iyo timer ichadzima panguva ino.
    -Kana wakasarudza ON or OFF, ndapota dzokera kuNhanho #5 pasi pe "KURONGWA ZVIITIKO ZVAKAITIKA"
    c. SKIP - Izvi zvichavanza kana kupfuura chiitiko ichi chaungade kushandisa pane imwe nguva inotevera. Iyo nguva inofuratira chero "yakasvetuka" zviitiko. Izvi zvinobatsira kune zvisina kujairika zvirongwa zvinodiwa, senge marongero ezororo.
    d. ERAS (bvisa) - Izvi zvinodzima chiitiko chakasarudzwa.
    -Kana wasarudza SKIP kana ERASE unogona kuenderera kuNhanho #5 pasi pe "PROGRAMMING SECIFIC EVENTS" kana Dzvanya MODE kuti udzokere kuAUTO, RAND (random) kana MAN (manual).
    INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - ratidza 6

COUNTDOWN OPERATION CHETE Countdown Setup
PRO-ZANO: Nguva ichafamba nekukurumidza kana ukabata bhatani.

  1. Shandisa + kana - bhatani kuseta huwandu hwenguva yekuverenga yaungade.
    INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - ratidza 7
  2. Dzvanya bhatani re ON/OFF kuti usimbise
  3. Dzvanya uye bata mabhatani eMODE uye ON/OFF wobatirira kwemasekonzi mashanu. Iyo inoratidzira icharatidza iyo WARN (yambiro) menyu.
  4. Dzvanya + kana - kusarudza FLASH kana KUDZIMA.
    a. Kudzima - basa rekunyevera rakadzimwa.
    b. Kupenya - kana timer inosvika 3-maminetsi isati yavharwa, inopenya mwenje inodzorwa (kana imwe dunhu) kwesekondi 1. Iyo "sunburst" icon ichaonekwa pachiratidziro
    INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - ratidza 8
  5. Dzvanya bhatani reMODE kuti usimbise
  6. Dzvanya iyo + kana - kusarudza yaunoda LOCK sarudzo.
    a. Hapana - hapana basa rekuvhara rakaiswa.
    b. Misa - vashandisi havagone kushandisa Pause basa kumisa kuverengera kwetimer.
    c. Nguva - vashandisi vanogona zvakareview asi kwete kuchinja nguva yakatarwa. Vashandisi vanogona kugadzirisa kuverengera kunomhanya asi vanogona kusapfuudza iyo yakavharwa yekuvharika kuseta.
    d. Zvese - zvese kumbomira uye kuseta kana kushandura yekuvhara-kudzima kuseta kwakavharwa.
  7. Dzvanya bhatani reMODE kuti usimbise, chiratidziro chinozoratidza KUDZIMA

Chinja Nguva Yekuverenga
PRO-ZANO: Kana chibatiso chenguva chiri muLOCK MODE, haungakwanise kuita chero shanduko panguva yakatarwa.
Kuti utange kana kumisa kuverenga pasi, tinya bhatani ON/OFF.
Kuti umbomira kuverenga pasi, tinya bhatani reModhi.

  1. Dzvanya bhatani re ON / OFF kusvika iyo skrini ichiratidza KUDZIMWA
  2. Dzvanya uye ubate bhatani + kana - kuti uise huwandu hwenguva yekuverengera yaunoda.

Countdown Operating Tips

  • Kutarisa Timer Setting - Dzvanya iyo + kana - bhatani kuti utarise iyo timer yekumisikidza. Chiratidziro chinoratidza iyo timer kuseta kwemasekonzi maviri.
  • Kuisa Timer Kana Yakakiyiwa - Kuti uvhure iyo nguva, ndapota ona iyo Countdown Setup chikamu.
  • Kuseta Timer Kana ISINA Kukiiwa - Kana timer isiri KUKAKIRWA, mushandisi anogona kugadzirisa magadzirirwo enguva, asi anofanira kudzima timer asati agadzirisa.
  • Kumbomira Kuverenga - Kana iyo timer isati yakiiwa, dzvanya bhatani reMODE kuti umbomira kuverenga kuri kuitika.
    Misa mbariro dzinopenya apo kuverenga kunoramba kwakatsiga. Dzvanya MODE zvakare kuti uenderere mberi nekuverengera kana kudzvanya bhatani re ON/OFF kuti udzime mutoro.
  • Kupfupisa kana kurebesa Kuverengera kuri kuitika
    - Kuti uchinje kuverengera kwasara kuri kuenderera mberi, dzvanya uye bata bhatani + kana - kana bhatani ON/OFF kudzamara chiratidziro charatidza nguva yekumisikidza yaunoda kutenderera uku chete.
    Kana iyo timer ikatanga kutenderera kwayo kunotevera, kuverenga kunodzokera kune yakarongwa kuseta.
  • Kana wakakiyiwa unogona kungowedzera huwandu hwenguva kusvika kune yakanyanya nguva yakatarwa.
  • Kushandisa Remote Switch mune 3-Nzira - Paunenge uchidzora iyo timer neyekure switch, chinja chiri kure switch kamwe kuti ubate kana kudzima.

INSTALLATION

PRO-TIP: Kana uchiisa timer ine angave kontrakta kana mota mutoro, ruzha sefa inokurudzirwa (ET-NF). An example ye-single-pole uye nhatu-nzira wiring inotevera. Kune mamwe matatu-nzira-nhatu wiring mamiriro, enda ku www.intermatic.com.
Bvisa simba papaneti yebasa.

  1. Bvisa madziro switch, kana zvichibvira.
  2. Bvisa waya iripo inopera kusvika 7/16”.
  3. Waya iyo timer mubhokisi remadziro.

Imwe-Puro WiringINTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - mutsetse

A Dema - Inobatanidza kune inopisa (dema) waya kubva kuSimba reSimba
B Bhuruu - Inobatanidza kune imwe waya (dema) kubva pamutoro
C Tsvuku - Waya iyi haishandiswe mukumisikidza imwe chete.
Cap ine twist connector
D Green - Inobatanidza kune ivhu rakapihwa

Nhatu-Nzira Wiring
PRO-TIP: Chinhambwe chiri pakati peiyo timer uye switch iri kure haifanire kudarika 100 tsoka.
Iyo wiring inoratidzwa pazasi ndeye timer inotsiva matatu-nzira switch padivi remutsara. INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - mutsetse 2

A Black Batanidza kune iyo kubva ku "COMMON" - waya yakabviswa
terminal ye switch iri kutsiviwa
I Bhuruu - Batanidza kune imwe yedzimwe waya dzakabviswa pane switch ichitsiviwa. Rekodha ruvara rwewaya yakabatana newaya yebhuruu kuti ishandiswe panguva yekuisa-padivi pekuisa
Tsvuku — Batanidza kune yasara waya yakabviswa pairi
chinja ichitsiviwa. Rekodha ruvara rwewaya yakabatana newaya dzvuku kuti ishandiswe panguva yekuiswa-padivi pekuisa
D Green - Batanidza kune ivhu rakapihwa
E Jumper Wire -Kune imwe nzira-nhatu switch, isa yakapihwa jumper waya pakati pewaya B neyakajairwa terminal.

KUPEDZA INSTALLATION

  1. Ita shuwa kuti ma twist-on wire nzungu akachengetedzwa, wozopinza waya mubhokisi renguva yemadziro, uchisiya nzvimbo yenguva.
  2. Uchishandisa screws dzakapihwa, chengetedza timer kubhokisi remadziro.
  3. Fukidza timer neplate yepamadziro uye chengetedza uchishandisa masiruu akapihwa.
  4. Kune matatu-nzira wiring, isa remote switch mubhokisi remadziro.
  5. Isa madziro emadziro uye chengetedza.
  6. Batanidzazve simba pane sevhisi pane.

Kuedza Timer
Ita shuwa kuti timer inoratidza MAN (manual) Mode panguva yekuyedza
Single-Pole Wiring Test
Kuti uedze nguva, dzvanya ON/OFF kakawanda. Iyo timer inofanirwa "kubaya" uye Chiyero Chinodzorwa kana mudziyo (mutoro) unofanirwa kubatidza kana KUDZIMA.
Matatu-Nzira Wiring Test

  1. Kuti uedze timer, edza neremote switch mune imwe neimwe yemanzvimbo ayo maviri.
  2. Dzvanya ON/OFF kakawanda. Iyo timer inofanirwa "kubaya" uye mwenje unodzorwa kana mudziyo (mutoro) unofanirwa kubatidza kana KUDZIMA.
  3. Kana iyo timer ikadzvanya, asi mutoro haushande:
    a. Bvisa simba papaneti yebasa.
    b. Ongororazve wiring uye ona kuti mutoro unoshanda.
    c. Batanidzazve simba pane sevhisi pane.
    d. Retest.
  4. Kana timer ikadzvanya, asi mutoro unoshanda chete kana switch iri kure iri mune imwe yenzvimbo dzayo mbiri, dzokorora Nhanho 3, ad, asi chinjanisa waya mbiri dzevafambi (waya Pakati peiyo timer uye iri kure-nzira nhatu switch) yakabatana kune tsvuku uye. waya yeblue timer PRO-TIP: Bvunza nyanzvi yemagetsi inokwanisa kana switch uye timer ikatadza kushanda sezvakarongwa.
  5. Kana iyo timer "inodzvanya" uye mudziyo unodzorwa ukabatidza uye KUDZIMA sezvakarongwa, iyo timer inoiswa zvinobudirira!

KUTAMBUDZA

Cherechedza: : Kuti uwane mamwe matipi ekugadzirisa matambudziko, bata Intermatic Technical Support pa: 815-675-7000.

Kucherechedzwa Dambudziko Zvinogona Kukonzera  Zvekuita
Chiratidzo chenguva hachina chinhu, uye timer hai "tinya" paunoyedza kuibatidza kana kuidzima. • Bhatiri rashaikwa
• Bhatiri haribhadhariswe
• Bhatiri rakaiswa zvisizvo		 • Isa bhatiri
• Tsiva bhatiri
• Iva nechokwadi chokuti bhatiri rakaiswa zvakanaka.
Timer haichinji ON/OFF asi kuratidza kunotaridzika sezvakangoita • Nguva haina kuiswa muAUTO, RAND, kana MAN MODE
• Bhatiri rakaderera uye rinoda kuchinjwa		 • Dzvanya MODE kuti usarudze mashandiro eMODE yaunoda kushandisa
• Tsiva bhatiri
Timer inodzoreredzwa kusvika 12:00 • Timer yakaiswa pamwe chete necontactor kana mota mutoro. • Isa sefa yeruzha (ET-NF) panzvimbo yeruzha
Timer haipinde AUTO kana RAND modhi kana "MODE" yakadzvanywa • Hapana purogiramu yakasarudzwa • Enderera ku “Programming Standard
Zviitiko” chikamu
Nguva inoshanda nenguva dzisiridzo, kana kusvetuka dzakarongwa ZVIITIKO nguva • Chirongwa chekushanda chine zviitiko zvinopesana kana zvisiri izvo
• Bhatiri rinogona kunge risina simba.
• Chibatiso chenguva chiri muRAND modhi, iyo inosiyana nguva dzekuchinja kusvika ku +/- maminitsi gumi nemashanu		 • Review zvirongwa zvakarongwa, dzokorora
sezvinodiwa.
• Tsiva bhatiri.
• Sarudza "Auto Mode"
Mutoro unoshanda chete kana: kure (nzira nhatu) switch iri munzvimbo imwechete, kana timer inofuratira switch iri kure. • Remote switch ine waya zvisirizvo. • Tarisa zvakare wiring, kunyanya kune jumper
Iyo timer inofuratira matatu-nzira dziri kure switch kunyangwe yakadzimwa nemazvo, kana mutoro unodzima pakarepo mushure mekubatidzwa. • Remote switch kana timer ine waya
zvisizvo.
• Pane kureba kwakanyanyisa kwewaya (kupfuura 100 feet).
• Remote switch haisi kushanda nemazvo kana kusakara.		 • Bata nyanzvi yemagetsi
Iyo bhatiri tireyi yakaoma kutsiva. • Bhatiri harina kugara mutireyi
• tireyi haina kurongeka
• Matebhu ekusangana mutireyi akakotama		 • Gadzirisa bhatiri mutireyi, wozoisazve.

LIMITED WARRANTY

Warranty sevhisi inowanikwa ne (a) kudzorera chigadzirwa kumutengesi akatengerwa unit kana (b) nekuzadza waranti yekuda pamhepo pa.
https://www.intermatic.com/Support/Warranty-Claims. Warrandi iyi inogadzirwa ne: Intermatic Incorporated, 1950 Innovation Way, Suite 300, Libertyville, IL 60048. Kuti uwane rumwe ruzivo rwechigadzirwa kana waranti enda ku: http://www.Intermatic.com kana kufona 815-675-7000, MF 8AM kusvika 4:30pm

Ndokumbirawo utarise QR kodhi yelongitude uye latitude chati

INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature - qr kodhihttps://l.ead.me/bcrVyB

Zvinyorwa / Zvishandiso

INTERMATIC ST01 MuWall Timer ine Astro kana Countdown Feature [pdf] Bhuku reMushandisi
ST01 MuWall Timer ine Astro kana Countdown Feature, ST01, MuWall Timer ine Astro kana Countdown Feature, kana Countdown Feature, Countdown Feature

References

Related Posts

Siya mhinduro

Yako email kero haizoburitswa. Nzvimbo dzinodiwa dzakamakwa *