Mataupu lalafi
1 MICROCHIP Stepper Theta Tupulaga v4.2 Pulea afi
2 Folasaga
3 Autu Version
4 Lagolago Meafaigaluega tafe
5 Vaega
6 Fa'amatalaga Fa'atino
7 Stepper Theta Fa'atupuina Parata ma Fa'ailoga Fa'amatalaga
8 Fa'atonuga Fa'aaogā
9 Folasaga
10 Aotelega
11 Vaega
12 Fa'atinoina ole IP Core ile Libero Design Suite
13 Fa'aaogāina ma Fa'atinoga
14 Fa'amatalaga Fa'atino
15 Stepper Theta Fa'atupuina Parata ma Fa'ailoga Fa'amatalaga
16 Ata o Taimi
17 Su'ega Su'ega
18 Toe Iloilo Tala'aga
19 Microchip FPGA Lagolago
20 Microchip Fa'amatalaga
21 Au'aunaga Fa'asilasilaga Suiga o Mea
22 Lagolago Tagata Fa'atau
23 Fa'ailoga Puipuiga o Fa'ailoga Fa'atonu a Microchip
24 Faasilasilaga Faaletulafono
25 Fa'ailoga Fa'ailoga
26 Faiga Fa'atonuga
27 Fa'atauga ma Au'aunaga i le Lalolagi Atoa
28 Pepa / Punaoa
28.1 Fa'asinomaga
29 Fa'amatalaga Fa'atatau

MICROCHIP-logo

MICROCHIP Stepper Theta Tupulaga v4.2 Pulea afi

MICROCHIP-Stepper-Theta-Generation-v4.2-Motor-Control-fig-1

Folasaga

O le Stepper Theta Generation v4.2 o se masini e faʻaaogaina mo le faʻatonutonuina o tulaga e ala i le faʻagasolo atu i se numera o laasaga. O le stepper motor o loʻo i ai se numera faʻamautu o laasaga i le suiga, ae e mafai ona faʻagasolo i laʻasaga laʻititi, lea e faʻaleleia ai le faʻaiuga o le laasaga. O le poloka IP e gaosia ai le theta lea e faʻaaogaina e le stepper motor control algorithm. O lenei masini e lagolagoina le microstepping e oʻo atu i le 2048 microsteps, faʻaitiitia ai le galu ma le paʻu o le eletise i le afi.

Autu Version

O lenei taiala fa'aoga e fa'atatau ile Stepper Theta Generation v4.2.

Lagolago Meafaigaluega tafe

Libero software e mafai ona faʻaogaina mo faʻataʻitaʻiga, faʻasologa, ma le faʻatulagaina. Stepper Theta Generation ua laiseneina ma fa'ailoga RTL e tatau ona fa'atau ese'ese. Mo nisi fa'amatalaga, va'ai Stepper Theta Generation.

Vaega

Stepper Theta Generation o loʻo i ai vaega taua nei:

  • Fa'atinoina ole IP Core ile Libero Design Suite
  • Lagolago microstepping e oo atu i le 2048 microsteps
  • Faʻaitiitia le gaʻo o le uila ma le malosi o le afi

Fa'amatalaga Fa'atino

O le Stepper Theta Generation v4.2 masini e gaosia ai le theta lea e fa'aogaina e le stepper motor control algorithm. E lagolagoina le microstepping e oʻo atu i le 2048 microsteps, faʻaitiitia le galu ma le paʻu o le eletise i totonu o le afi.

Stepper Theta Fa'atupuina Parata ma Fa'ailoga Fa'amatalaga

O le masini e iai fa'ailoga eseese o fa'aoga ma fa'ailoga, o lo'o fa'amatala auiliili i le tusi fa'aoga.

  • Faʻailo Faʻailo
    Lisi o fa'ailoga fa'aoga o lo'o tu'uina atu i le tusi fa'aoga.
  • Faailo o Galuega
    Lisi o fa'ailo o lo'o tu'uina atu i le tusi fa'aoga.
  • Ata o Taimi
    O le tusi fa'aoga o lo'o tu'uina atu ai ata o taimi mo le masini.
  • Su'ega Su'ega
    O loʻo tuʻuina atu e le tusi lesona faʻamatalaga i le auala e faʻatautaia ai faʻataʻitaʻiga e faʻaaoga ai le masini.
  • Toe Iloilo Tala'aga
    O lo'o i ai i le tusi fa'aoga se tala fa'asolopito mo le masini.
  • Microchip FPGA Lagolago
    O le masini e lagolagoina e Microchip FPGA.

Fa'atonuga Fa'aaogā

Mo le fa'aogaina o le Stepper Theta Generation v4.2, mulimuli i fa'atonuga o lo'o tu'uina atu i le tusi lesona. Ia mautinoa ua e fa'atauina le laisene RTL fa'ailoga mo le masini. E mafai ona e faʻaogaina le polokalame Libero mo faʻataʻitaʻiga, faʻasologa, ma le faʻatulagaina. Fa'afeso'ota'i fa'ailoga fa'aoga ma fa'ailoga e fa'atatau i fa'atonuga o lo'o tu'uina atu i le tusi fa'aoga. Faʻataʻitaʻi faʻataʻitaʻiga e faʻaaoga ai le testbench o loʻo tuʻuina atu i le tusi faʻaoga. Va'ai i ata o le taimi i le tusi lesona e fa'amautinoa ai le taimi sa'o o fa'ailo. Fa'afeso'ota'i le lagolago a le Microchip FPGA mo so'o se isi fesoasoani.

Folasaga

O le stepper motor e faʻaaogaina mo le faʻatonuina o le tulaga e ala i le faʻaogaina o se numera o laasaga. E ui o le stepper motor o loʻo i ai se numera tumau o laʻasaga i le suiga, e mafai ona faʻagasolo i laʻasaga laʻititi, lea e faʻaleleia ai le laasaga o le fofo. O le la'a la'ititi e fa'aitiitia ai fo'i le ga'o ma le paoa o le afi. O le poloka IP e maua ai le theta lea e faʻaaogaina e le stepper motor control algorithm. E mafai ona filifili microstepping e oʻo atu i le 2048 microsteps.

Aotelega

Autu Version O lenei pepa e fa'atatau ile Stepper Theta Generation v4.2.
Aiga Meafaigaluega Lagolago • PolarFire® SoC

• PolarFire
  • RTG4™
  • IGLOO® 2
  • SmartFusion® 2
Lagolago Meafaigaluega tafe Manaomia Libero® SoC v11.8 poʻo faʻasalalauga mulimuli ane.
Laisene O loʻo tuʻuina atu le faʻailoga faʻailoga RTL atoa mo le autu, e mafai ai ona faʻapipiʻi le autu ma SmartDesign. Simulation, Synthesis, ma le Layout e mafai ona faia i le polokalama Libero. Stepper Theta Generation ua laiseneina ma fa'ailoga RTL e tatau ona fa'atau ese'ese. Mo nisi fa'amatalaga, va'ai Stepper Theta Tupulaga.

Vaega

Stepper Theta Generation o loʻo i ai vaega taua nei:

  • Fa'atatau le tulimanu ma le fa'asologa o la'a
  • Micro-laasaga e mafai ona oʻo atu i le 2048 microsteps
  • Fausia se tulimanu i tulaga tulaga ma tulaga saoasaoa

Fa'atinoina ole IP Core ile Libero Design Suite

E tatau ona fa'apipi'i le IP core i le IP Catalog o le Libero® System-on-Chip (SoC) software. O lenei mea e otometi ona faia e ala i le IP Catalog update function i le Libero SoC software, poʻo le IP core e mafai ona sii mai ma le lima mai le lisi. O le taimi lava e faʻapipiʻi ai le IP core i le Libero SoC software IP Catalog, o le autu e mafai ona faʻapipiʻiina, faʻatupuina, ma faʻapipiʻiina i totonu o le meafaigaluega SmartDesign mo le faʻaofiina i le lisi o poloketi Libero.

Fa'aaogāina ma Fa'atinoga

O le laulau o lo'o i lalo o lo'o lisiina ai le fa'aogaina o masini na fa'aogaina mo le Stepper Theta Generation.

Fa'amatalaga Fa'atonu Punaoa Fa'atinoga (MHz) RAMs Math Blocks Chip Globals
Aiga Meafaigaluega LUTs DFF LSRAM μSRAM
PolarFire® SoC MPFS250T 285 128 200 0 0 0 0
PolarAfi MPF300T 285 128 200 0 0 0 0
SmartFusion® 2 M2S150 285 128 200 0 0 0 0

Taua: 

  1. O fa'amaumauga i lenei laulau o lo'o pu'eina i le fa'aogaina o fa'asologa masani ma le fa'atulagaina. CDR reference clock source na seti i Dedicated faatasi ai ma isi tulaga tau fetuutuunai e le suia.
  2. O le uati e faʻatapulaʻaina i le 200 MHz aʻo faʻatautaia le suʻesuʻega taimi e ausia ai numera faʻatinoga.

Fa'amatalaga Fa'atino

  • O lenei vaega o loʻo faʻamatalaina faʻamatalaga faʻatinoga o le Stepper Theta Generation.
  • O le ata o lo'o i lalo o lo'o fa'aalia ai le fa'asologa o poloka poloka o le Stepper Theta Generation.

    MICROCHIP-Stepper-Theta-Generation-v4.2-Motor-Control-fig-2

  • O le profile o le stepper theta output ma taunuuga o le taimi nei mo filifiliga micro-laasaga eseese o loʻo faʻaalia e ala i fuainumera nei.

    MICROCHIP-Stepper-Theta-Generation-v4.2-Motor-Control-fig-3

  • O le ata o lo'o i lalo o lo'o fa'aalia ai le fa'atupuina o le theta i galu o le afi mo le afa la'a.

    MICROCHIP-Stepper-Theta-Generation-v4.2-Motor-Control-fig-4

  • O le ata o lo'o i lalo o lo'o fa'aalia ai le fa'atupuina o le ta'avale afi i le tulaga fa'a-kuata.

    MICROCHIP-Stepper-Theta-Generation-v4.2-Motor-Control-fig-5

  • O le ata o lo'o i lalo o lo'o fa'aalia ai le fa'atupuina o le ta'avale afi i le 1024 micro-stepping mode.

    MICROCHIP-Stepper-Theta-Generation-v4.2-Motor-Control-fig-6

  • Ole maualuga ole la'a la'ititi e filifili ile fua ole fa'agata fa'aulu ma e tatau ona fa'asili ole 2. Ole numera fa'ato'a fa'aofi, ona filifili lea ole saoasaoa lea e fa'afou ai le tau. E fa'atupu le theta se'ia ausia le fa'atonuga o la'asaga ona taofia lea o le theta i le tau fa'afou mulimuli se'ia suia laasaga o le fa'atonuga. Ae ui i lea, i le saosaoa, o le output theta o loʻo faʻafouina pea.

Stepper Theta Fa'atupuina Parata ma Fa'ailoga Fa'amatalaga

O lenei vaega o loʻo talanoaina ai faʻamaufaʻailoga i le Stepper Theta Generation GUI configurator ma faʻailoga I / O.

Fa'ailoga Ulufale ma Fa'ailoga
O le laulau o lo'o i lalo o lo'o lisiina ai ports o lo'o i totonu ma fa'aulufale o le Stepper Theta Generation.

Igoa Faailoga Fa'atonuga Fa'amatalaga
sys_clk_i Ulufale Uati faiga.
reset_i Ulufale Asynchronous malosi toe setiina faailoilo maualalo.
mafai_i Ulufale Fa'ailoga fa'aulu e mafai ai ona fa'atupu fa'ama'i.
mode_i Ulufale Pe a seti i le 0 (zero), fa'atupu le fa'ailoga i le Tulaga Tulaga.

Pe a seti i le 1, fa'atupuina le fa'ailoga i le Va'aiga Saosaoa (Fa'aauau le suiga o le fa'asologa).
slew_cnt_i Ulufale Slew count input - e filifili le saoasaoa e fa'afou ai le tau ile 1 µs.
fua_gata_i Ulufale Fa'agata fa'agata fa'aoga - filifili le numera o Microsteps e ala i le fa'amalamalamaina o le fa'atupuina o le fa'asili ole umi ole Microstep e tatau ona fa'asili ole 2 (mo leample, 1, 2, 4, 8, 16 ma isi).
cmd_step_no_i Ulufale Poloaiga- o le numera o laasaga / micro-step moto e tatau ona gaoioi.
theta_output_o Tuuina atu Angle e fa'avae i luga o mea fa'aoga.
step_cnt_o Tuuina atu Laasaga faitau mea e fai e siaki le numera o laasaga.

Ata o Taimi

  • O lenei vaega o loʻo faʻatalanoaina ata o taimi o le Stepper Theta Generation.
  • O le ata o loʻo i lalo o loʻo faʻaalia ai le ata o le taimi o le Stepper Theta Generation i le saoasaoa.

    MICROCHIP-Stepper-Theta-Generation-v4.2-Motor-Control-fig-7

Su'ega Su'ega

E fa'aogaina se su'ega tu'ufa'atasi e fa'amaonia ma fa'ata'ita'i le Stepper Theta Generation ua ta'ua o le su'ega fa'aoga. Ua tuʻuina atu le Testbench e siaki ai galuega a le Stepper Theta Generation IP.

Fa'ata'oto
O laasaga nei o loʻo faʻamatalaina pe faʻafefea ona faʻataʻitaʻiina le autu e faʻaaoga ai le testbench:

  1. Alu i le Libero SoC Catalog tab, faʻalautele Solutions-MotorControl, faalua kiliki Stepper Theta Generation, ona kiliki lea OK. O faʻamaumauga e fesoʻotaʻi ma le IP o loʻo lisiina i lalo o Faʻamaumauga.
    Taua: Afai e te le va'ai i le Catalog tab, fa'afeiloa'i i View > Windows menu ma kiliki Catalog e fa'aalia.

    MICROCHIP-Stepper-Theta-Generation-v4.2-Motor-Control-fig-8

  2. I luga o le Stimulus Hierarchy tab, filifili le testbench (stepper_theta_tb.v), kiliki i luga ona kiliki lea Simulate Pre-Synth Design > Open Interactively.
    Taua: Afai e te le va'ai i le Stimulus Hierarchy tab, fa'afeiloa'i i View > Windows menu ma kiliki Stimulus Hierarchy e fa'aalia.

    MICROCHIP-Stepper-Theta-Generation-v4.2-Motor-Control-fig-9
    ModelSim tatala i le suʻega suʻega file, e pei ona faaalia i le ata o loo i lalo.

    MICROCHIP-Stepper-Theta-Generation-v4.2-Motor-Control-fig-10
    Taua: Afai ua fa'alavelaveina le fa'ata'ita'iga ona o le fa'atapula'aina o le ta'aloga ua fa'amaoti mai i le .do file, faʻaaoga le faʻatonuga uma e faʻamaeʻa ai le faʻataʻitaʻiga.

Toe Iloilo Tala'aga

O le tala fa'asolopito o lo'o fa'amatalaina suiga na fa'atinoina i le pepa. O suiga o lo'o lisiina e ala i toe iloiloga, amata i le lomiga aupito lata mai.

Toe Iloiloga Aso Fa'amatalaga
A 03/2023 Ole lisi lea o suiga o lo'o faia ile toe iloiloga A ole pepa:

• Siitia le pepa i le mamanu Microchip.

• Fa'afouina le numera o le pepa i le DS00004956A mai le 50200609.

• Faaopoopo 3. Ata o Taimi.

• Faaopoopo 4. Su'ega Su'ega.
3.0 — Ole lisi lea o suiga ile toe iloiloga 3.0 ole pepa:

• Fa'aopoopo le fa'amatalaga IP i le ulutala pepa.

• Aveese le vaega o le Parameter Configuration mai le Fa'atinoga o Meafaigaluega.
2.0 — Fa'afouina vaega Fa'atonu.
1.0 — Toefuataiga 1.0 o le lomiga muamua lea o lenei pepa.

Microchip FPGA Lagolago

  • Microchip FPGA products group backs its products with various support services, including Customer Service, Customer Technical Support Center, a webnofoaga, ma ofisa faatau i le lalolagi atoa. E fautuaina tagata fa'atau e asiasi i Microchip i luga ole laiga a'o le'i fa'afeso'ota'i le lagolago ona e foliga mai ua uma ona tali a latou fesili.
  • Fa'afeso'ota'i le Nofoaga Autu Lagolago Fa'apitoa e ala ile webnofoaga ile www.microchip.com/support. Ta'u le numera o le Vaega o Meafaigaluega FPGA, filifili le vaega o mataupu talafeagai, ma fa'apipi'i le mamanu files a'o faia se mataupu lagolago fa'apitoa.
  • Fa'afeso'ota'i Auaunaga Fa'atau mo le lagolago o oloa e le fa'apitoa, e pei o le tau o oloa, fa'aleleia o oloa, fa'afouga fa'amatalaga, tulaga oka, ma le fa'atagaina.
    • Mai Amerika i Matu, valaau 800.262.1060
    • Mai le lalolagi atoa, valaau 650.318.4460
    • Fax, mai so'o se mea i le lalolagi, 650.318.8044

Microchip Fa'amatalaga

Le Microchip Webnofoaga
Microchip e maua le lagolago i luga ole laiga e ala i la matou webnofoaga i www.microchip.com/. Lenei web'upega tafa'ilagi e fa'aoga e fai ai files ma fa'amatalaga faigofie ona maua e tagata fa'atau. O nisi o mea e maua e aofia ai:

  • Lagolago oloa - Pepa o faamatalaga ma mea sese, tusi talosaga ma samppolokalame, punaoa mamanu, ta'iala a le tagata fa'aoga ma pepa lagolago mo meafaigaluega, fa'asalalauga fou fa'akomepiuta ma polokalama fa'amaumauga
  • Lagolago Fa'atekinisi Lautele - Fesili e Fai soo (FAQs), talosaga lagolago faʻapitoa, vaega faʻatalanoa i luga ole laiga, Microchip design partner programme list
  • Pisinisi o Microchip – Filifilia oloa ma taʻiala faʻatonu, faʻasalalauga lata mai a le Microchip, lisi o semina ma mea na tutupu, lisi o ofisa faʻatau Microchip, tufatufaina ma sui fale gaosi oloa

Au'aunaga Fa'asilasilaga Suiga o Mea

  • O le auaunaga fa'asilasilaga suiga o oloa a Microchip e fesoasoani e fa'amautu ai tagata fa'atau i oloa Microchip. O le a maua e le au fai saofaga le faʻamatalaga imeli i soʻo se taimi e iai suiga, faʻafouga, toe teuteuga poʻo mea sese e fesoʻotaʻi ma se aiga o oloa faʻapitoa poʻo meafaigaluega atinaʻe e fiafia i ai.
  • Ina ia lesitala, alu i www.microchip.com/pcn ma mulimuli i faatonuga o le resitalaina.

Lagolago Tagata Fa'atau

  • O tagata fa'aoga o oloa Microchip e mafai ona maua fesoasoani e ala i le tele o auala:
    • Fa'asoa po'o le Sui
    •  Ofisa Fa'atauga Fa'alotoifale
    • Embedded Solutions Engineer (ESE)
    • Lagolago Fa'atekinisi
  • E tatau i tagata fa'atau ona fa'afeso'ota'i le latou tufatufaina, sui po'o le ESE mo le lagolago. O loʻo avanoa foʻi ofisa faʻatau i le lotoifale e fesoasoani i tagata faʻatau. O lo'o iai se lisi o ofisa fa'atau ma nofoaga i totonu o lenei pepa.
  • E maua le lagolago fa'apitoa e ala ile webnofoaga i: www.microchip.com/support

Fa'ailoga Puipuiga o Fa'ailoga Fa'atonu a Microchip

Manatua faʻamatalaga o loʻo i lalo o le faʻaogaina o le puipuiga o tulafono i luga o oloa Microchip:

  • O oloa Microchip e fetaui ma faʻamatalaga o loʻo i totonu o la latou Pepa Faʻamatalaga Microchip.
  • E talitonu Microchip o lona aiga o oloa e saogalemu pe a faʻaaogaina i le auala faʻamoemoeina, i totonu o faʻamatalaga faʻaogaina, ma i lalo o tulaga masani.
  • Microchip fa'atauaina ma puipuia fa'amalosi ana aia tatau tau meatotino. O taumafaiga e soli le tulafono o le puipuiga o le oloa Microchip e matua fa'asaina ma e ono solia ai le Digital Millennium Copyright Act.
  • E le mafai e le Microchip poʻo se isi mea gaosi semiconductor ona faʻamaonia le saogalemu o lana tulafono. O le puipuiga o tulafono laiti e le o lona uiga tatou te faʻamautinoa o le oloa e "le mafai ona motusia". O le puipuiga o tulafono laiti o lo'o fa'asolosolo pea. Microchip ua tuuto atu i le faʻaauauina pea o le faʻaleleia atili o uiga puipuia o tulafono a tatou oloa.

Faasilasilaga Faaletulafono

  • O lenei lomiga ma faʻamatalaga o loʻo i totonu e mafai ona faʻaaogaina naʻo oloa Microchip, e aofia ai le mamanu, suʻega, ma tuʻufaʻatasia oloa Microchip ma lau talosaga. O le fa'aogaina o nei fa'amatalaga i so'o se isi lava faiga e solia ai nei aiaiga. O fa'amatalaga e uiga i le fa'aogaina o masini e tu'uina atu mo na'o lou fa'amalieina ma e ono suia i fa'afouga. O lau matafaioi le faʻamautinoa o lau talosaga e fetaui ma au faʻamatalaga. Fa'afeso'ota'i lou ofisa fa'atau Microchip fa'apitonu'u mo se lagolago fa'aopoopo pe, maua se lagolago fa'aopoopo ile www.microchip.com/en-us/support/design-help/client-support-services.
  • O LENEI FAʻAMATALAGA E TUUINA E MICROCHIP "AS IS". E LEAI FAIA e le MICROCHIP ni sui po'o se fa'amaoniga o so'o se ituaiga pe fa'aalia pe fa'aali, tusia pe tugutu, tulāfono po'o se isi mea, e feso'ota'i ma fa'amatalaga e aofia ai ae le tapula'a i so'o se fa'amaoniaga fa'amaonia, fa'amaonia, ma le fa'amaoniaina. FAAMOEMOEGA, POO WARRANTY E FAI I ONA TULAGA, TULAGA, POO LE FAIGALUEGA.
  • E LEAI SE MEA E TATAU AI MICROCHIP MO SO'O SE FA'AMATALAGA, FA'AMATALAGA, FA'ASA'OGA, FA'AMATALAGA, PO'O LE FA'A'ALI'AGA MA'U'U, FA'AFIA, TAU, PO'O LE TU'U'UINA O SO'O SE I'UGA SO'O SE FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA, PE'O LE MEA NA FA'AUPUNA'I, E tusa lava pe fa'aletonu. FA'ATONU POO LE FA'AFIA E FA'AVAEINA. I LE AGATOGA FA'AALIGA E LE TULAFONO, O LE UMA AOFA'IGA A MICROCHIP I TOTOGI UMA I SO'O SE AUALA E FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA E LE'A LOLOA I LE TOTOGI O TOTOGI, AFAI E IAI, NA E TOTOGI SA'O I LE MICROCHIP MO LE FA'AMATALAGA.
  • O le fa'aogaina o masini Microchip i le tausiga o le ola ma/po'o le saogalemu o lo'o i le tulaga lamatia o le tagata fa'atau, ma e malie le tagata fa'atau e puipuia, fa'aleaga ma taofia Microchip le afaina mai so'o se mea leaga, tagi, suti, po'o tupe alu e mafua mai i lea fa'aoga. E leai ni laisene e tu'uina atu, fa'aalia po'o se isi mea, i lalo o so'o se Microchip aia tatau tau le atamai se'i vagana ua ta'ua.

Fa'ailoga Fa'ailoga

  • Le igoa Microchip ma le logo, le Microchip logo, Adaptec, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus, maXTouch MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom , SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ma XMEGA o fa'ailoga fa'amaufa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.
  • AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed ​​Control, HyperLight Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet- Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, ma ZL o faʻailoga resitalaina o Microchip Technology Incorporated i Amerika.
  • Taofi Fa'aigoa Fa'atasi, AKS, Analog-mo-le-Digital Age, So'o se Capacitor, So'o se In, So'oOut, Suiga Fa'aopoopo, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net Matching, Dynamic Average Matching , DAM, ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Parallel, IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, KoD, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Faʻamaonia logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple Blocker, RTAX , RTG4, SAM-ICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Aofa'i Tumau, Taimi Fa'alagolago, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, ma ZENA o fa'ailoga fa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.
  • SQTP ose fa'ailoga tautua a Microchip Technology Incorporated i Amerika
  • O le logo Adaptec, Frequency on Demand, Silicon Storage Technology, ma Symmcom o fa'ailoga fa'amaufa'ailoga a Microchip Technology Inc. i isi atunu'u.
  • GestIC ose fa'ailoga fa'amaufa'ailoga a Microchip Technology Germany II GmbH & Co. KG, ose lala o Microchip Technology Inc., i isi atunu'u.
  • O isi fa'ailoga tau fefa'ataua'iga uma o lo'o ta'ua ii o meatotino a latou kamupani.
  • © 2023, Microchip Technology Incorporated ma ona lala. Ua Taofia Aia Tatau Uma.

Faiga Fa'atonuga

Mo faʻamatalaga e uiga i Microchip's Quality Management Systems, faʻamolemole asiasi www.microchip.com/quality

Fa'atauga ma Au'aunaga i le Lalolagi Atoa

AMERIKA ASIA/ PASIFIK ASIA/ PASIFIK Europa
Ofisa Autasi

2355 Sisifo Chandler Blvd. Chandler, AZ 85224-6199

Telefoni: 480-792-7200

Fax: 480-792-7277

Lagolago Fa'atekinisi: www.microchip.com/support Web tuatusi: www.microchip.com Atlanta

Duluth, GA

Telefoni: 678-957-9614

Fax: 678-957-1455

Austin, TX

Telefoni: 512-257-3370

Boston Westborough, MA Telefoni: 774-760-0087

Fax: 774-760-0088

Chicago

Itasca, IL

Telefoni: 630-285-0071

Fax: 630-285-0075

Dallas

Addison, TX

Telefoni: 972-818-7423

Fax: 972-818-2924

Detroit

Novi, MI

Telefoni: 248-848-4000

Houston, TX

Telefoni: 281-894-5983

Indianapolis Noblesville, IN Tel: 317-773-8323

Fax: 317-773-5453

Telefoni: 317-536-2380

Los Angeles Mission Viejo, CA Telefoni: 949-462-9523

Fax: 949-462-9608

Telefoni: 951-273-7800

Raleigh, NC

Telefoni: 919-844-7510

Niu Ioka, NY

Telefoni: 631-435-6000

San Jose, CA

Telefoni: 408-735-9110

Telefoni: 408-436-4270

Kanata - Toronto

Telefoni: 905-695-1980

Fax: 905-695-2078

 Ausetalia – Sini

Telefoni: 61-2-9868-6733

Saina - Beijing

Telefoni: 86-10-8569-7000

Saina – Chengdu

Telefoni: 86-28-8665-5511

Saina – Chongqing

Telefoni: 86-23-8980-9588

Saina – Dongguan

Telefoni: 86-769-8702-9880

Saina – Guangzhou

Telefoni: 86-20-8755-8029

Saina – Hangzhou

Telefoni: 86-571-8792-8115

Saina - Hong Kong SAR

Telefoni: 852-2943-5100

Saina – Nanjing

Telefoni: 86-25-8473-2460

Saina – Qingdao

Telefoni: 86-532-8502-7355

Saina – Shanghai

Telefoni: 86-21-3326-8000

Saina – Shenyang

Telefoni: 86-24-2334-2829

Saina – Shenzhen

Telefoni: 86-755-8864-2200

Saina – Suzhou

Telefoni: 86-186-6233-1526

Saina - Wuhan

Telefoni: 86-27-5980-5300

Saina – Xian

Telefoni: 86-29-8833-7252

Saina – Xiamen

Telefoni: 86-592-2388138

Saina – Zhuhai

Telefoni: 86-756-3210040

 Initia – Bangalore

Telefoni: 91-80-3090-4444

Initia – New Delhi

Telefoni: 91-11-4160-8631

Initia - Pune

Telefoni: 91-20-4121-0141

Iapani - Osaka

Telefoni: 81-6-6152-7160

Iapani - Tokyo

Telefoni: 81-3-6880-3770

Korea – Daegu

Telefoni: 82-53-744-4301

Korea – Seoul

Telefoni: 82-2-554-7200

Meleisia – Kuala Lumpur

Telefoni: 60-3-7651-7906

Meleisia – Penang

Telefoni: 60-4-227-8870

Filipaina – Manila

Telefoni: 63-2-634-9065

Singapore

Telefoni: 65-6334-8870

Taiuani – Hsin Chu

Telefoni: 886-3-577-8366

Taiuani – Kaohsiung

Telefoni: 886-7-213-7830

Taiuani – Taipei

Telefoni: 886-2-2508-8600

Taialani – Bangkok

Telefoni: 66-2-694-1351

Vietnam – Ho Chi Minh

Telefoni: 84-28-5448-2100

 Ausetalia – Uelese

Telefoni: 43-7242-2244-39

Fax: 43-7242-2244-393

Tenimaka – Copenhagen

Telefoni: 45-4485-5910

Fax: 45-4485-2829

Finelani – Espoo

Telefoni: 358-9-4520-820

Farani – Paris

Tel: 33-1-69-53-63-20

Fax: 33-1-69-30-90-79

Siamani – Garching

Telefoni: 49-8931-9700

Siamani – Haan

Telefoni: 49-2129-3766400

Siamani – Heilbronn

Telefoni: 49-7131-72400

Siamani – Karlsruhe

Telefoni: 49-721-625370

Siamani – Munich

Tel: 49-89-627-144-0

Fax: 49-89-627-144-44

Siamani – Rosenheim

Telefoni: 49-8031-354-560

Isaraelu – Ra’anana

Telefoni: 972-9-744-7705

Italia – Milan

Telefoni: 39-0331-742611

Fax: 39-0331-466781

Italia – Padova

Telefoni: 39-049-7625286

Netherlands – Drunen

Telefoni: 31-416-690399

Fax: 31-416-690340

Nouei – Trondheim

Telefoni: 47-72884388

Polani – Warsaw

Telefoni: 48-22-3325737

Romania – Bucharest

Tel: 40-21-407-87-50

Sepania - Madrid

Tel: 34-91-708-08-90

Fax: 34-91-708-08-91

Suetena – Gothenberg

Tel: 46-31-704-60-40

Suetena - Stockholm

Telefoni: 46-8-5090-4654

Peretania - Wokingham

Telefoni: 44-118-921-5800

Fax: 44-118-921-5820

Pepa / Punaoa

MICROCHIP Stepper Theta Tupulaga v4.2 Pulea afi [pdf] Taiala mo Tagata Fa'aoga
Stepper Theta Tupulaga v4.2 Pulea afi, Stepper Theta Tupulaga v4.2, Pulea afi, Stepper, Theta Tupulaga v4.2 Pulea afi

Fa'asinomaga

Fa'amatalaga Fa'atatau

Tuu se faamatalaga

E le fa'asalalauina lau tuatusi imeli. Fa'ailogaina fanua mana'omia *