Saturs paslēpties
1 STMicroelectronics RN0104 STM32 kuba monitors RF
2 Ievads
3 Klientu atbalsts
4 Vispārīga informācija
5 Izlaiduma informācija
6 Pārskatīšanas vēsture
7 Dokumenti / Resursi
7.1 Atsauces

ST-Microelectronics-Logo

STMicroelectronics RN0104 STM32 kuba monitors RF

STMicroelectronics-RN0104-STM32-Cube-Monitor-RF-Product-Image

Ievads

Šī laidiena piezīme tiek periodiski atjaunināta, lai sekotu līdzi STM32CubeMonRF (turpmāk tekstā — STM32CubeMonitor-RF) attīstībai, problēmām un ierobežojumiem.
Pārbaudiet STMicroelectronics atbalstu webvietne plkst www.st.com for the newest version. For the latest release summary, refer to Table 1.

1. tabula. STM32CubeMonRF 2.18.0 laidiena kopsavilkums

Tips Kopsavilkums
Neliela izlaišana
  • Alignment with STM32CubeWB firmware 1.23.0
  • Alignment with STM32CubeWBA firmware 1.7.0
  •  Upgrade of Java® runtime version from 17.0.10 to 21.0.04
  • Upgrade of supported OpenThread version to 1.4.0 API 377
  • Support of command-line interface (CLI)
  • Kļūdu labojumi

Klientu atbalsts

For more information or help concerning STM32CubeMonitor-RF, contact the nearest STMicroelectronics sales office or use the ST community at community.st.com. For a complete list of STMicroelectronics offices and distributors, refer to the www.st.com web lapā.

Programmatūras atjauninājumi
Programmatūras atjauninājumus un visu jaunāko dokumentāciju var lejupielādēt no STMicroelectronics atbalsta vietnes. web lapa plkst www.st.com/stm32cubemonrf

Vispārīga informācija

Beigāsview

STM32CubeMonitor-RF is a tool provided to help designers to:

  • Perform RF (radio frequency) tests of Bluetooth® LE applications
  • Perform RF (radio frequency) tests of 802.15.4 applications
  • Send commands to Bluetooth® LE parts to perform tests
  • Configure Bluetooth® LE beacons and manage file over-the-air (OTA) transfers
  • Discover Bluetooth® LE device profileun mijiedarboties ar pakalpojumiem
  • Send commands to OpenThread parts to perform tests
  • Visualize Thread device connections
  • Sniff 802.15.4 network

Šī programmatūra ir paredzēta STM32WB, STM32WB0 un STM32WBA sērijas mikrokontrolleriem, kuru pamatā ir Arm®(a) kodoli.

Resursdatora sistēmas prasības
Atbalstītās operētājsistēmas un arhitektūras

  • Windows®(b) 10 and 11, 64-bit (x64)
  • Linux®(c) Ubuntu®(d) LTS 22.04 and LTS 24.04
  • macOS®(e) 14 (Sonoma), macOS®(e) 15 (Sequoia)

Programmatūras prasības
For Linux®, the Java®(f) runtime environment (JRE™) is required for the installer. For 802.15.4 sniffer only:

  • Wireshark v2.4.6 or later is available from https://www.wireshark.org
  • Python™ card v3.8 or later is available from https://www.python.org/downloads
  • pySerial v3.4 or later, available from https://pypi.org/project/pyserial
  • Arm ir reģistrēta uzņēmuma Arm Limited (vai tā meitasuzņēmumu) preču zīme ASV un/vai citur.
  • Windows ir Microsoft uzņēmumu grupas preču zīme.
  • Linux® ir Linusa Torvalda reģistrēta preču zīme.
  • Ubuntu® is a registered trademark of Canonical Ltd.
  • macOS® ir Apple Inc. preču zīme, kas reģistrēta ASV un citās valstīs un reģionos.
  • Oracle un Java ir Oracle un/vai tā saistīto uzņēmumu reģistrētas preču zīmes.

Iestatīšanas procedūra

Windows®

Instalējiet
If an older version of STM32CubeMonitor-RF is already installed, the existing version must be uninstalled before installing the new one. The user must have administrator rights on the computer to run the installation.

  1. Lejupielādējiet failu STM32CMonRFWin.zip.
  2. Izskrūvējiet šo file uz pagaidu atrašanās vietu.
  3. Launch STM32CubeMonitor-RF.exe to be guided through the setup process.

Atinstalēt
To uninstall STM32CubeMonitor-RF, follow the steps below:

  1. Open the Windows Control panel.
  2. Select Programs and Features to display the list of programs installed on the computer.
  3. Left-click on STM32CubeMonitor-RF from the STMicroelectronics publisher and select the Uninstall function.

Linux®

Programmatūras prasības
Linux® instalētājam ir nepieciešama Java® izpildlaika vide. To var instalēt ar komandu apt-get install default-jdk vai pakotņu pārvaldnieku.

Instalējiet

  1. Lejupielādējiet failu STM32CMonRFLin.tar.gz.
  2. Izskrūvējiet šo file uz pagaidu atrašanās vietu.
  3. Make sure you have access rights to the target installation directory.
  4. Launch the execution of the SetupSTM32CubeMonitor-RF.jar file, or launch manually the installation with java -jar <install path>/SetupSTM32CubeMonitor-RF.jar.
  5. An icon appears on the desktop. If the icon is not executable, edit its properties and select the option Allow executing file kā programmu vai no Ubuntu® 19.10 un jaunākām versijām, un izvēlieties opciju Atļaut palaišanu.

Informācija par COM portu Ubuntu® vidē
The modemmanager process checks the COM port when the board is plugged in. Due to this activity, the COM port is busy for a few seconds, and STM32CubeMonitor-RF cannot connect.
The users need to wait for the end of the modemmanager activity before opening the COM port. If the user does not require the modemmanager, it is possible to uninstall it with the command sudo apt-get purge modemmanager.
For the sniffer mode, the modem manager must be uninstalled or disabled through the command sudo systemctl stop ModemManager.service before connecting the sniffer device.
If the modem manager cannot be disabled, it is also possible to define rules so that the modem manager ignores the sniffer device. The 10-stsniffer.rules file, available in the ~/STMicroelectronics/STM32CubeMonitor-RF/sniffer directory can be copied in /etc/udev/rules.d.

Atinstalēt  

  1. Launch the uninstaller.jar located in the installation directory /STMicroelectronics/STM32CubeMonitor-RF/Uninstaller. If the icon is not executable, edit its properties and select the option Allow executing file kā programma.
  2. Select Force deletion… and click on the Uninstall button.

macOS® 

Instalējiet

  1. Lejupielādējiet failu STM32CMonRFMac.zip.
  2. Izskrūvējiet šo file uz pagaidu atrašanās vietu.
  3. Make sure you have access rights to the target installation directory.
  4. Double-click on the installer STM32CubeMonitor-RF.dmg file.
  5. Open the STM32CubeMonitor-RF new disk.
  6. Drag and drop the STM32CubeMonitor-RF shortcut to the Applications shortcut.
  7. Drag and drop the document folder to a location of your choice.

If an error with STM32CubeMonitor-RF an not be opened because it is from an unidentified developer occurs, the command sudo spctl –master-disable must be used to disable the verification.

Atinstalēt

  1. In the applications folder, select the STM32CubeMonitor-RF icon and move it to trash.
  2. In the user’s home directory, remove the folder Library/STM32CubeMonitor-RF.

If the Library folder is hidden:

  • Atveriet Finder.
  • Hold down Alt (Option) and choose Go from the drop-down menu bar at the top of the screen.
  • The Library folder is listed below the Home folder.

Ierīces, ko atbalsta STM32CubeMonitor-RF

Atbalstītās ierīces
Rīks tiek testēts ar STM32WB55 Nucleo un dongle platēm (P-NUCLEO-WB55), STM32WB15 Nucleo plati (NUCLEO-WB15CC), STM32WB5MM-DK Discovery komplektu, STM32WBA5x Nucleo plati, STM32WBA6x Nucleo plati un STM32WB0x Nucleo plati.

The boards based on STM32WBxx are compatible if they feature:

  • A connection through a USB Virtual COM port or a serial link and
  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Thread_Cli_Cmd for Thread
    • Phy_802_15_4_Cli for 802.15.4 RF test
    • Mac_802_15_4_Sniffer.bin for sniffer

The boards based on STM32WBAxx are compatible if they feature: • A connection through a serial link and

  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Thread_Cli_Cmd for Thread
    • Phy_802_15_4_Cli for 802.15.4 RF test
      The boards based on STM32WB0x are compatible if they feature:
  • A connection through a serial link and
  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Ierīces savienojuma informācija un programmaparatūras atrašanās vieta ir aprakstīta lietotāja rokasgrāmatas STM2CubeMonitor-RF programmatūras rīka bezvadu veiktspējas mērījumiem (UM32) 2288. sadaļā.

Izlaiduma informācija

Jaunas funkcijas/uzlabojumi

  • Alignment with STM32CubeWB firmware 1.23.0
  • Alignment with STM32CubeWBA firmware 1.7.0
  • Upgrade of Java® runtime version from 17.0.10 to 21.0.04
  • Upgrade of supported OpenThread version to 1.4.0 API 377
  • Support of command-line interface (CLI)

Fiksētas problēmas

Šis laidiens:

  • Fixes issue 64748 – Add a dialog to select the beacon file
  • Fixes issue 202582 – [802.15.4 Sniffer] Incorrect RSS report value
  • Fixes issue 204195 – Some ACI/HCI commands do not send 16-bit UUID parameter
  • Fixes issue 204302 – VS_HCI_C1_DEVICE_INFORMATION DBGMCU_ICODE typo – DBGMCU_ICODER for STM32WBA
  • Fixes issue 204560 – [STM32WB0] Transmission packet count is abnormal on PER test

Ierobežojumi

  • When the device under test is disconnected, the software might not immediately detect the disconnection. In this case, an error is reported when a new command is sent. If the board is not detected after the error, it is necessary to unplug it and then reconnect it.
  • For sniffer on macOS®, the sniffer Python™ file tūlīt pēc kopēšanas jāiestata ar izpildāmo failu. Komanda ir chmod+x stm32cubeMonRf_sniffer.py.
  • STM32WB programmaparatūras versijas, kas ir vecākas par 1.16, netiek atbalstītas, nepieciešama jaunāka versija.
  • STM32WB0x Bluetooth® LE RF testu un STM32WBAxx RX testu laikā RSSI mērījumu vērtības netiek sniegtas.
  • Beacon un ACI Utilities paneļi STM32WB05N modelim nedarbojas.
  • Gan STM32WBxx, gan STM32WBAx gadījumā Bluetooth® LE RX un PER testos uztvērējs piedāvā PHY vērtību 0x04, bet to neatbalsta. Tā rezultātā pakete netiek saņemta.

Licencēšana
STM32CubeMonRF tiek piegādāts saskaņā ar programmatūras licences līgumu SLA0048 un tā papildu licences noteikumiem.

STM32CubeMonitor-RF izlaiduma informācija

STM32CubeMonitor-RF V1.5.0
Tool first version to support Bluetooth® Low Energy features of STM32WB55xx.
Versions 1.x.y have only Bluetooth® Low Energy support.

STM32CubeMonitor-RF V2.1.0
Addition of OpenThread support in the tool

STM32CubeMonitor-RF V2.2.0

  • Improvement of OpenThread command windows: Option to clear windows/history, details about OT commands selected in the tree
  • Addition of read param and set param buttons for OT commands used to read or set parameters
  • Addition of scripts for OpenThread
  • It is possible to add a loop in the script (refer to the user manual for details)
  • User interface update: the disabled items are now colored in gray
  • Implementation of search command for threads
  • Addition of the selection of Bluetooth® Low Energy PHY and modulation index
  • In Bluetooth® Low Energy RF tests, the frequency can be changed when the test is running

STM32CubeMonitor-RF V2.2.1

Jaunas funkcijas/uzlabojumi
The OTA download procedure is updated: When the target device configuration is in OTA loader mode, the target address is incremented by one. STM32CubeMonitor-RF now uses the incremented address for the download.
The list of OpenThread commands is aligned with the Thread® stack.

STM32CubeMonitor-RF V2.3.0

Jaunas funkcijas/uzlabojumi

  • Alignment with STM32WB55 cube firmware 1.0.0
  • Addition of 802.15.4 RF tests
  • New features in the ACI Utilities panel:
  • The discovery of remote Bluetooth® Low Energy devices
  • Interaction with the services of remote devices

STM32CubeMonitor-RF V2.4.0

Jaunas funkcijas/uzlabojumi

  • Alignment with STM32WB cube firmware 1.1.1
  • Support the over-the-air firmware update of the wireless stack (FUOTA).
  • Optimize FUOTA connection parameters to increase performance. Adds a warning if the address is below 0x6000.
  • Correction of UART detection issue on Windows® 10
  • The tool properly uses the write without response function to write a characteristic with write without response permission.
  • Update the device name in the device information box.
  • Fix the value of HCI_LE_SET_EVENT_MASK.
  • Correction of the text about the error reason description
  • Fix issues with OpenThread scripts.
  • Set a maximum size for graphs.
  • Update some control locks to prevent wrong actions from the user.

STM32CubeMonitor-RF V2.5.0

Jaunas funkcijas/uzlabojumi

  • Network Explorer is added to a new tab of Thread® mode.
  • This feature displays the connected Thread® devices and the connections between them.

STM32CubeMonitor–RF V2.6.0

Jaunas funkcijas/uzlabojumi

RF tests are added.
In the transmitter test, the sending of MAC frames is available. The user defines the frame.
In the receiver test, the LQI, ED, and CCA tests are available and the PER test shows the decoded frames.

Fiksētas problēmas

Šis laidiens: 

  • Updates the C1_Read_Device_Information command description,
  • Disables the navigation link when the 802.15.4 receiver test is in progress,
  • Updates ST logo and colors,
  • Fixes the blank popup message displayed when the script detects an error,
  • Disables the start button as soon as the channel list is inconsistent in the 802.15.4 PER multichannel test,
  • And includes a workaround to prevent freeze observed on a serial port with macOS®.

STM32CubeMonitor-RF V2.7.0

Jaunas funkcijas/uzlabojumi
Atjaunina OpenThread API ar versiju 1.1.0. Pievienota OpenThread CoAP drošā API. Pievienots 802.15.4 analizatora režīms.

Fiksētas problēmas

Šis laidiens:

  • Fixes the address bytes inverted in the OTA updater panel,
  • Fixes the OpenThread network explore button label management,
  • Fixes the behavior of the parameter field when the parameter is from the terminal and is wrong,
  • Fixes the naming of Bluetooth® Low Energy commands according to the AN5270 specification,
  • Fixes the connection fail behavior of the OpenThread COM port,
  • Fixes Bluetooth® Low Energy tester connection fail behavior on Linux®,
  • Fixes OpenThread panId hexadecimal value display,
  • Improve SBSFU OTA and tests,
  • Fixes ACI client characteristic configuration after reconnection.

STM32CubeMonitor-RF V2.7.1

Jaunas funkcijas/uzlabojumi

Sniffer fixes.

Fiksētas problēmas

Šis laidiens:
Fixes the error on quick Wireshark sniffer stop then start.
Removes two extra bytes in sniffed data.

STM32CubeMonitor-RF V2.8.0

Jaunas funkcijas/uzlabojumi

OTA improvement:

  • Adds an option in the OTA panel to increase the packet length (MTU) to optimize speed.
  • Adds a menu to select the target. It is required to compute the number of sectors to erase for SMT32WB15xx.
  • Removes the modulations not suitable for the PER test in the PER picklist.

Fiksētas problēmas

Šis laidiens:

  • Fixes issue 102779: Displaying offset and attribute data length is reversed for ACI_GATT_ATTRIBUTE_MODIFIED_EVENT.
  • Aligns the message HCI_ATT_EXCHANGE_MTU_RESP_EVENT with AN5270.
  • Fixes the attribute name in HCI_LE_DATA_LENGTH_CHANGE_EVENT.
  • Improves the welcome screen layout for small screens.

Fiksētas problēmas

Šis laidiens:

  • Fixes issue 64425: Send command button unlocked during OTA transfer.
  • Fixes issue 115533: During the OTA update, the issue in the
  • ACI_GAP_START_GENERAL_DISCOVERY_PROC command.
  • Fixes issue 115760:
  • During OTA updates, when the Optimize MTU size check box is ticked, the download stops after the MTU size exchange.
  • Fixes issue 117927: change address type to public device address for OTA.
  • Fixes issue 118377: wrong sector size erased before OTA transfer.
  • Set OTA block size according to MTU size exchange.

Jaunas funkcijas/uzlabojumi

  • Adds compatibility with the OpenThread stack of STM32Cube_FW_V1.14.0. This stack is based on the OpenThread 1.2 stack and supports the O.T. 1.1 commands.
  • Adds new Bluetooth® Low Energy commands and events. Updates some existing commands to be compatible with the release 1.14.0 of the stack.

Commands added:

    • HCI_LE_READ_TRANSMIT_POWER,
    • HCI_LE_SET_PRIVACY_MODE,
    • ACI_GAP_ADD_DEVICES_TO_LIST,
    • HCI_LE_READ_RF_PATH_COMPENSATION,
    • HCI_LE_WRITE_RF_PATH_COMPENSATION
  • Events added:
    • HCI_LE_EXTENDED_ADVERTISING_REPORT_EVENT,
    • HCI_LE_SCAN_TIMEOUT_EVENT,
    • HCI_LE_ADVERTISING_SET_TERMINATED_EVENT,
    • HCI_LE_SCAN_REQUEST_RECEIVED_EVENT,
    • HCI_LE_CHANNEL_SELECTION_ALGORITHM_EVENT
  • Command removed:
    • ACI_GAP_START_NAME_DISCOVERY_PROC
  • Command updated (parameters or description):
    • ACI_HAL_GET_LINK_STATUS,
    • HCI_SET_CONTROLLER_TO_HOST_FLOW_CONTROL,
    • HCI_HOST_BUFFER_SIZE,
    • ACI_HAL_WRITE_CONFIG_DATA,
    • ACI_GAP_SET_LIMITED_DISCOVERABLE,
    • ACI_GAP_SET_DISCOVERABLE,
    • ACI_GAP_SET_DIRECT_CONNECTABLE,
    • ACI_GAP_INIT,
    • ACI_GAP_START_GENERAL_CONNECTION_ESTABLISH_PROC,
    • ACI_GAP_START_SELECTIVE_CONNECTION_ESTABLISH_PROC,
    • ACI_GAP_CREATE_CONNECTION,
    • ACI_GAP_SET_BROADCAST_MODE,
    • ACI_GAP_START_OBSERVATION_PROC,
    • ACI_GAP_GET_OOB_DATA,
    • ACI_GAP_SET_OOB_DATA,
    • ACI_GAP_ADD_DEVICES_TO_RESOLVING_LIST,
    • ACI_HAL_FW_ERROR_EVENT,
    • HCI_LE_READ_ADVERTISING_PHYSICAL_CHANNEL_TX_POWER,
    • HCI_LE_ENABLE_ENCRYPTION,
    • HCI_LE_LONG_TERM_KEY_REQUEST_NEGATIVE_REPLY,
    • HCI_LE_RECEIVER_TEST_V2,
    • HCI_LE_TRANSMITTER_TEST_V2,
    • ACI_HAL_WRITE_CONFIG_DATA,
    • ACI_GAP_SET_DIRECT_CONNECTABLE,
    • HCI_LE_SET_EVENT_MASK,
    • HCI_LE_TRANSMITTER_TEST

Atjaunina 802.15.4 sniffera programmaparatūru STM32WB55 Nucleo un jaunu programmaparatūru STM32WB55 USB dongle

Fiksētas problēmas

Šis laidiens:

  • Fixes issue 130999: Some packets are missed in the PER test.
  • Fixes issue 110073: Some panId values cannot be set in the Network Explorer tab.

STM32CubeMonitor-RF V2.9.1

Jaunas funkcijas/uzlabojumi

  • Updates 802.15.4 sniffer firmware software.
  • Fixes some issues reported on version 2.9.0.
  • Fixes issue 131905: The Bluetooth® Low Energy TX LE PHY menu is not visible in RF tests.
  • Fixes issue 131913: The tools do not identify some Bluetooth® Low Energy versions.

Ierobežojumi
Šī STM32CubeMonitor-RF versija nenodrošina paplašinātas reklāmas komandas. Dažām darbībām (FUOTA, ACI skenēšana) jāizmanto Bluetooth® Low Energy steks ar mantotu reklāmas komandu. Lai uzzinātu, kura programmaparatūra ir jāizmanto, skatiet lietotāja rokasgrāmatu UM2288.

STM32CubeMonitor-RF V2.10.0

Jaunas funkcijas/uzlabojumi

  • Alignment with STM32CubeWB firmware 1.15.0
  • OpenThread 1.3 support
  • Bluetooth® Low Energy extended advertising support
  • Bluetooth® Low Energy commands alignment with AN5270 Rev. 16
  • New Bluetooth® Low Energy RSSI acquisition method

Fiksētas problēmas

Šis laidiens:

  • Fixes issue 133389: A command with variable length crashes the tool.
  • Fixes issue 133695: Bluetooth® Low Energy missing
  • HCI_LE_TRANSMITTER_TEST_V2 PHY input parameter.
  • Fixes issue 134379: RF transmitter test, payload size is limited to 0x25.
  • Fixes issue 134013: Wrong text seen after launching and stopping tests by checking the Get RSSI box.

STM32CubeMonitor-RF V2.11.0

Jaunas funkcijas/uzlabojumi

  • Support of STM32WBAxx devices except for OTA firmware update
  • Continuous wave mode in the 802.15.4 transmitter test (STM32CubeWB firmware 1.11.0 and later)
  • Availability to save Bluetooth® Low Energy ACI log information in a csv formatted file
  • Alignment with STM32CubeWB firmware 1.16.0
  • Alignment with STM32CubeWBA firmware 1.0.0
  • Update of 802.15.4 sniffer firmware
  • Removal of 802.15.4 RX_Start command before RX_get and Rs_get_CCA

Fiksētas problēmas
Šis laidiens:

  • Fixes issue 139468: Advertising test generates all advertising channels without being selected
  • Fixes issue 142721: Event with the length of the next param on more than 1 byte is not managed
  • Fixes issue 142814: Unable to set some command parameters with variable length
  • Fixes issue 141445: VS_HCI_C1_WRITE_REGISTER – ERROR found in script results
  • Fixes issue 143362: The tool gets blocked when setting the variable param length to 0

Ierobežojumi

  • Jauna problēma 139237: ACI panelī, kad reklamēšana sākas pirms skenēšanas veikšanas, rīks nepareizi pārvalda reklamēšanas ikonu un stāvokli.
  • Jauna problēma ACI utilītu panelī: nav iespējams sākt skenēšanu, ja ir sākta reklāma. Reklāma vispirms ir jāaptur.

STM32CubeMonitor-RF V2.12.0

Jaunas funkcijas/uzlabojumi

  • Alignment with STM32CubeWB firmware 1.17.0
  • Alignment with STM32CubeWBA firmware 1.1.0
  • Fix advertising issues using GAP commands instead of legacy
  • Add STM32WBA OTA firmware update support
  • Fix 802.15.4 sniffer issues around the Python™ script
  • Upgrade Java® runtime version from 8 to 17
  • Update missing Bluetooth® Low Energy parameters values and description

Fiksētas problēmas

Šis laidiens:

  • Fixes issues 149148 and 149147: 802.15.4 sniffer leading into negative timestamps on Wireshark
  • Fixes issue 150852: Bluetooth® Low Energy OTA profile application could not be discovered on STM32WBAxx
  • Fixes issue 150870: Missing parameters description in HTML wireless interface
  • Fixes issue 147338: Gatt_Evt_Mask parameter must be a bit mask
  • Fixes issue 147386: Missing ACI command to control antenna switching mechanism for AoA/AoD
  • Fixes issue 139237: Improve the advertising mechanism

STM32CubeMonitor-RF V2.13.0

Jaunas funkcijas/uzlabojumi

  • Alignment with STM32CubeWB firmware 1.18.0
  • Alignment with STM32CubeWBA firmware 1.2.0
  • Add 802.15.4 support for STM32WBAxx devices
  • Add OpenThread support for STM32WBAxx devices

Fiksētas problēmas

Šis laidiens:

  • Fixes issue 161417: Combo Box not displayed on 802.15.4 Start TX
  • Fixes issue 159767: Replace the Twitter bird logo with the X logo
  • Fixes issue 152865: Transfer of firmware via OTA from WB55 device connected to STM32CubeMonitor-RF to device type WBA5x not active
  • Fixes issue 156240: Missing interval of parameter’s possible values in tool description
  • Fixes issue 95745 [802.15.4 RF]: No information displayed about the device ID connected
  • Fixes issue 164784: Error using online beacon with a random address
  • Fixes issues 163644 and 166039: Error using advertising with a random or public not connectable device address
  • Fixes issue 69229: Scanning cannot stop when advertising is running.

STM32CubeMonitor-RF V2.14.0

Jaunas funkcijas/uzlabojumi

  • Alignment with STM32CubeWB firmware 1.19.0
  • Alignment with STM32CubeWBA firmware 1.3.0
  • Upgrade supported OpenThread version to 1.3.0 API 340

Fiksētas problēmas

Šis laidiens:

  • Fixes issues 165981 and 172847 to stabilize Linux® and macOS®, 802.15.4 sniffer behavior
  • Fixes issues 165552 and 166762 to improve scan and advertising features
  • Fixes issue 172471 to extend STM32WBA 802.15.4 power range

STM32CubeMonitor-RF V2.15.0

Jaunas funkcijas/uzlabojumi

  • Alignment with STM32CubeWB firmware 1.20.0
  • Alignment with STM32CubeWBA firmware 1.4.0
  • Add support of STM32CubeWB0 firmware 1.0.0
  • Upgrade Java® runtime version from 17.0.2 to 17.0.10

Fiksētas problēmas

  • Šis laidiens:
  • Fixes issue 174238 – 802.15.4 sniffer malformed packet in Wireshark

STM32CubeMonitor-RF V2.15.1

Jaunas funkcijas/uzlabojumi
Add support of STM32WB05N firmware 1.5.1

Fiksētas problēmas

Šis laidiens:

  • Fixes issue 185689: The first value of power in the ACI Utilities panel is not displayed for STM32WB or STM32WBA
  • Fixes issue 185753: Add STM32WB06 in STM32CubeMonitor-RF

Jaunas funkcijas/uzlabojumi

  • Alignment with STM32CubeWB firmware 1.21.0
  • Alignment with STM32CubeWBA firmware 1.5.0
  • Alignment with STM32CubeWB0 firmware 1.1.0
  • Upgrade supported OpenThread stack to API 420 version 1.3.0
  • Update 802.15.4 sniffer firmware
  • Add STM32WB0X FUOTA support
  • Improve path management

Fiksētas problēmas

Šis laidiens:

  • Fixes issue 193557 – Vulnerability of commons-io
  • Fixes issue 190807 – FUOTA image base address management
  • Fixes issue 188490 – WBA PER test change to get RSSI
  • Fixes issue 191135 – Cannot connect to STM32WB15
  • Fixes issue 190091 – Connection to WB05N does not work the first time
  • Fixes issue 190126 – OpenThread, device information menu disabled
  • Fixes issue 188719 – Error in baud rate value
    3.23 STM32CubeMonitor-RF V2.17.0
    3.23.1 New features/enhancements
  • Alignment with STM32CubeWB firmware 1.22.0
  • Alignment with STM32CubeWBA firmware 1.6.0
  • Alignment with STM32CubeWB0 firmware 1.2.0
  • Support of STM32WBA6x devices

Fiksētas problēmas

Šis laidiens:

  • Fixes issue 185894 – Support STM32WB1x BLE_Stack_light_fw upgrade
  • Fixes issue 195370 – ACI_GAP_SET_NON_DISCOVERABLE return Command disallowed error
  • Fixes issue 196631 – Could not perform RF Tests on WB05X

Pārskatīšanas vēsture

2. tabula. Dokumentu pārskatīšanas vēsture

Datums Pārskatīšana Izmaiņas
02. gada 2017. marts 1 Sākotnējā izlaišana.
  25. gada 2017. aprīlis   2 Modified for release 1.2.0:–  updated Section 2: Release information–  updated Section 2.3: Restrictions–  added Section 3.2: STM32CubeMonitor-RF V1.2.0 information
   27-jūnijs-2017    3 Changed document classification to ST Restricted.Modified for release 1.3.0, hence updated document title and addedSection 3.3: STM32CubeMonitor-RF V1.3.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3: Setup procedure, Ierīces konfigurācija, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions un Section 3.2: STM32CubeMonitor-RF V1.2.0 information.
    29-septembris-2017     4 Grozīts 1.4.0 versijai, tāpēc atjaunināts dokumenta nosaukums un pievienotsSection 3.4: STM32CubeMonitor-RF V1.4.0 information.Updated 1.1. sadaļa: beigusiesview, Section 1.2: Host PC system requirements, Section 1.3.1: Windows, Section 1.4: Devices supported by STM32CubeMonitor-RF, Section 2.1: New features/enhancements, Section 2.2: Fixed issues un Section 2.3: Restrictions.Added Section 1.3.2: Linux®, Section 1.3.3: macOS®, un Section 2.4: Licensing.Updated Table 1: STM32CubeMonitor-RF 1.4.0 release summary.
   29. janvāris — 2018. janvāris    5 Grozīts 1.5.0 versijai, tāpēc atjaunināts dokumenta nosaukums un pievienotsSection 3.5: STM32CubeMonitor-RF V1.5.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3.2: Linux®, Ierīces konfigurācija, Section 2.1: New features/enhancements, Section 2.2: Fixed issues un Section 2.3: Restrictions.Updated Table 1: STM32CubeMonitor-RF 1.5.0 release summary unTable 2: List of licenses.
   14. gada 2018. maijs    6 Grozīts 2.1.0 versijai, tāpēc atjaunināts dokumenta nosaukums un pievienotsSection 3.6: STM32CubeMonitor-RF V2.1.0 information.Updated 1.1. sadaļa: beigusiesview, Section 1.2: Host PC system requirements, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions.Atjaunināts Table 1: STM32CubeMonitor-RF 2.1.0 release summary unTable 2: List of licenses.
   24.-2018. augusts    7 Grozīts 2.2.0 versijai, tāpēc atjaunināts dokumenta nosaukums un pievienotsSection 3.7: STM32CubeMonitor-RF V2.2.0 information.Updated Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.2: Restrictions.Updated Table 1: STM32CubeMonitor-RF 2.3.0 release summary unTable 2: List of licenses.
Datums Pārskatīšana Izmaiņas
   15. gada 2018. oktobris    8 Grozīts 2.2.1 versijai, tāpēc atjaunināts dokumenta nosaukums un pievienotsSection 3.8: STM32CubeMonitor-RF V2.2.1 information.Updated 1.1. sadaļa: beigusiesview, Section 1.3.2: Linux®, Section 1.3.3: macOS®, Section 2.1: New features/enhancements, un Section 2.2: Restrictions.Removed former Section 2.2: Fixed issues.
  15. gada 2019. februāris   9 Updated:–  Title, 1. tabula, un Sadaļa 2 switch to the 2.3.0 release–  Sadaļa 3 former releases history–  1.1. sadaļa: beigusiesview to add OpenThread and 802.15.4 RF–  Section 1.3: Setup procedure with different OS
  12. gada 2019. jūlijs   10 Updated:–  Title, 1. tabula, un Sadaļa 2 switch to the 2.4.0 release–  2. tabula jSerialComm version–  Sadaļa 3 former releases history
  03. gada 2020. aprīlis   11 Updated:–  Title, 1. tabula, un Sadaļa 2 switch to the 2.5.0 release–  2. tabula Inno setup version–  Sadaļa 3 former releases history
  13. gada 2020. novembris   12 Updated:–  Title, 1. tabula, un Sadaļa 2 switch to the 2.6.0 release–  2. tabula un 3. tabula details in an added copyright column–  Sadaļa 3 former releases history
  08. gada 2021. februāris   13 Updated:–  Title, 1. tabula, Sadaļa 1, un Sadaļa 2 switch to the 2.7.0 release with new802.15.4 sniffer mode and Resursdatora sistēmas prasības–  3. tabula Java SE and Java FX version–  Sadaļa 3 former releases history
  08-jūnijs-2021   14 Updated:–  Title, 1. tabula, un Sadaļa 2 switch to the 2.7.1 release with 802.15.4 sniffer fixes–  Sadaļa 3 former releases history
    15. gada 2021. jūlijs     15 Updated:–  Title, 1. tabula, un Sadaļa 2 switch to the 2.8.0 release with OTA speed improvement and new OTA option for STM32WB15xx–  Sadaļa 1.4 NUCLEO-WB15CC support and test firmware explanation–  2. tabula with SLA0048 in Licencēšana–  3. tabula with Inno setup version–  Sadaļa 3 former releases history
  21. gada 2021. decembris   16 Updated:–  Title, 1. tabula, un Sadaļa 2.1 switch to the 2.8.1 release with fixes for Bluetooth® Low Energy OTA–  Sadaļa 3 former releases history
Datums Pārskatīšana Izmaiņas
07. gada 2022. jūlijs 17 Atjaunināts:
  • Nosaukums, 1. tabula, un Sadaļa 2.1 switch to the 2.9.0 release
  • Python™ card version in Programmatūras prasības
  • Section 2.4: Licensing replacing tables with the suitable license agreement statement
  • Sadaļa 3 former releases history
14-septembris-2022 18 Atjaunināts:
  • Nosaukums, 1. tabula, un Sadaļa 2 switch to the 2.9.1 release
  • Java FX-GTK3 conflict moved from Ierobežojumi to Linux® Instalējiet
  • Sadaļa 3 former releases history
29. gada 2022. novembris 19 Atjaunināts:
  • Nosaukums, 1. tabula, un Sadaļa 2 switch to the 2.10.0 release
  • Removed note on fixed GTK2 issue in Linux® Instalējiet
  • Sadaļa 3 former releases history
03. gada 2023. marts 20 Atjaunināts:
  • Nosaukums, 1. tabula, un Sadaļa 2 switch to the 2.11.0 release
  • Sadaļa 3 former releases history
4. gada 2023. jūlijs 21 Atjaunināts:

Nosaukums, 1. tabula, un Sadaļa 2 switch to the 2.12.0 release
Sadaļa 3 former releases history
23. gada 2023. novembris 22 Atjaunināts:

Nosaukums, 1. tabula, un Sadaļa 2 switch to the 2.13.0 release

Sadaļa 3 former releases history
14. gada 2024. marts 23 Atjaunināts:
  • Nosaukums, 1. tabula, un Sadaļa 2 switch to the 2.14.0 release
  • macOS® versions in Atbalstītās operētājsistēmas un arhitektūras
  • Sadaļa 3 former releases history
01. gada 2024. jūlijs 24 Atjaunināts:
  • Nosaukums, 1. tabula, un Sadaļa 2 switch to the 2.15.0 release
  • Nucleo boards in Ierīces, ko atbalsta STM32CubeMonitor-RF
  • Sadaļa 3 former releases history
12-septembris-2024 25 Atjaunināts:
Nosaukums, 1. tabula, un 2. Sadaļa ieskaitot Ierobežojumi, switch to the 2.15.1 releaseSadaļa 3 former releases history
22. gada 2024. novembris 26 Atjaunināts:
  • Nosaukums, 1. tabula, un 2. Sadaļa ieskaitot Ierobežojumi, switch to the 2.16.0 release
  • Linux® and macOS® versions in Atbalstītās operētājsistēmas un arhitektūras
  • Sadaļa 3 former releases history
Datums Pārskatīšana Izmaiņas
 18. gada 2025. februāris  27 Atjaunināts:
Nosaukums, 1. tabula, Section 1.4, Section 2.1, Section 2, ieskaitot
Ierobežojumi, switch to the 2.17.0 release
Sadaļa 3 former releases history
23-jūnijs-2025 28 Atjaunināts:

Nosaukums, Tabula 1, sadaļa 2, ieskaitot Ierobežojumi, switch to the 2.18.0 release

Sadaļa 3 former releases history

SVARĪGS PAZIŅOJUMS – UZMANĪGI IZLASIET

  • STMicroelectronics NV un tā meitasuzņēmumi (“ST”) patur tiesības jebkurā laikā bez brīdinājuma veikt izmaiņas, labojumus, uzlabojumus, modifikācijas un uzlabojumus ST izstrādājumos un/vai šajā dokumentā. Pirms pasūtījuma veikšanas pircējiem jāiegūst jaunākā atbilstošā informācija par ST produktiem. ST produkti tiek pārdoti saskaņā ar ST pārdošanas noteikumiem un nosacījumiem, kas ir spēkā pasūtījuma apstiprināšanas brīdī.
  • Pircēji ir pilnībā atbildīgi par ST produktu izvēli, izvēli un lietošanu, un ST neuzņemas nekādu atbildību par palīdzību pielietošanā vai pircēja produktu dizainu.
  • ST šeit nepiešķir nekādas tiešas vai netiešas licences jebkādām intelektuālā īpašuma tiesībām.
  • ST produktu tālākpārdošana ar noteikumiem, kas atšķiras no šeit norādītās informācijas, anulē jebkādu ST piešķirto garantiju šādam produktam.
  • ST un ST logotips ir ST preču zīmes. Papildinformāciju par ST preču zīmēm skatiet www.st.com/trademarks  Visi pārējie produktu vai pakalpojumu nosaukumi ir to attiecīgo īpašnieku īpašums.
  • Informācija šajā dokumentā aizstāj un aizstāj informāciju, kas iepriekš sniegta jebkurās iepriekšējās šī dokumenta versijās.
  • © 2025 STMicroelectronics – visas tiesības paturētas

Dokumenti / Resursi

STMicroelectronics RN0104 STM32 kuba monitors RF [pdfLietotāja rokasgrāmata
RN0104 STM32 kuba monitors RF, RN0104, STM32 kuba monitors RF, kuba monitors RF, monitors RF

Atsauces

Atstājiet komentāru

Jūsu e-pasta adrese netiks publicēta. Obligātie lauki ir atzīmēti *