Cov ntsiab lus zais
1 STMicroelectronics RN0104 STM32 Cube Monitor RF
2 Taw qhia
3 Cov neeg siv khoom txhawb nqa
4 Cov ntaub ntawv dav dav
5 Tshaj tawm cov ntaub ntawv
6 Kev kho keeb kwm
7 Cov ntaub ntawv / Cov ntaub ntawv
7.1 Cov ntaub ntawv

ST-Microelectronics-Logo

STMicroelectronics RN0104 STM32 Cube Monitor RF

STMicroelectronics-RN0104-STM32-Cube-Monitor-RF-Product-Image

Taw qhia

Daim ntawv tso tawm no tau hloov kho ib ntus kom ua raws li STM32CubeMonRF (hauv qab no hu ua STM32CubeMonitor-RF) evolution, teeb meem, thiab kev txwv.
Tshawb xyuas STMicroelectronics kev txhawb nqa website ntawm www.st.com for the newest version. For the latest release summary, refer to Table 1.

Table 1. STM32CubeMonRF 2.18.0 tso tawm cov ntsiab lus

Hom Cov ntsiab lus
Kev tso me me
  • Alignment with STM32CubeWB firmware 1.23.0
  • Alignment with STM32CubeWBA firmware 1.7.0
  •  Upgrade of Java® runtime version from 17.0.10 to 21.0.04
  • Upgrade of supported OpenThread version to 1.4.0 API 377
  • Support of command-line interface (CLI)
  • Kab laum kho

Cov neeg siv khoom txhawb nqa

For more information or help concerning STM32CubeMonitor-RF, contact the nearest STMicroelectronics sales office or use the ST community at community.st.com. For a complete list of STMicroelectronics offices and distributors, refer to the www.st.com web nplooj.

Software hloov tshiab
Kev hloov kho software thiab tag nrho cov ntaub ntawv tshiab tuaj yeem rub tawm los ntawm STMicroelectronics kev txhawb nqa web paj at www.st.com/stm32cubemonrf

Cov ntaub ntawv dav dav

Tshajview

STM32CubeMonitor-RF is a tool provided to help designers to:

  • Perform RF (radio frequency) tests of Bluetooth® LE applications
  • Perform RF (radio frequency) tests of 802.15.4 applications
  • Send commands to Bluetooth® LE parts to perform tests
  • Configure Bluetooth® LE beacons and manage file over-the-air (OTA) transfers
  • Discover Bluetooth® LE device profiles thiab cuam tshuam nrog cov kev pabcuam
  • Send commands to OpenThread parts to perform tests
  • Visualize Thread device connections
  • Sniff 802.15.4 network

Cov software no siv rau microcontrollers ntawm STM32WB, STM32WB0, thiab STM32WBA series, raws li Arm®(a) cores.

Host PC system yuav tsum
Txhawb kev khiav hauj lwm systems thiab architectures

  • Windows®(b) 10 and 11, 64-bit (x64)
  • Linux®(c) Ubuntu®(d) LTS 22.04 and LTS 24.04
  • macOS®(e) 14 (Sonoma), macOS®(e) 15 (Sequoia)

Software xav tau
For Linux®, the Java®(f) runtime environment (JRE™) is required for the installer. For 802.15.4 sniffer only:

  • Wireshark v2.4.6 or later is available from https://www.wireshark.org
  • Python™ card v3.8 or later is available from https://www.python.org/downloads
  • pySerial v3.4 or later, available from https://pypi.org/project/pyserial
  • Arm yog ib lub cim lag luam ntawm Arm Limited (lossis nws cov koom tes) hauv Asmeskas thiab / lossis lwm qhov.
  • Windows yog lub cim lag luam ntawm Microsoft pawg tuam txhab.
  • Linux® yog lub npe lag luam ntawm Linus Torvalds.
  • Ubuntu® is a registered trademark of Canonical Ltd.
  • macOS® yog lub cim lag luam ntawm Apple Inc., sau npe hauv Asmeskas thiab lwm lub tebchaws thiab cheeb tsam.
  • Oracle thiab Java yog cov cim lag luam ntawm Oracle thiab / lossis nws cov koom tes.

Kev teeb tsa

Qhov rai

Nruab
If an older version of STM32CubeMonitor-RF is already installed, the existing version must be uninstalled before installing the new one. The user must have administrator rights on the computer to run the installation.

  1. Download STM32CMonRFWin.zip.
  2. Unzip qhov no file mus rau qhov chaw ib ntus.
  3. Launch STM32CubeMonitor-RF.exe to be guided through the setup process.

Uninstall
To uninstall STM32CubeMonitor-RF, follow the steps below:

  1. Open the Windows Control panel.
  2. Select Programs and Features to display the list of programs installed on the computer.
  3. Left-click on STM32CubeMonitor-RF from the STMicroelectronics publisher and select the Uninstall function.

Linux® ua

Software xav tau
Java® runtime ib puag ncig yog xav tau rau Linux® installer. Nws tuaj yeem ntsia tau nrog cov lus txib apt-tau nruab default-jdk lossis tus thawj tswj pob.

Nruab

  1. Download STM32CMonRFLin.tar.gz.
  2. Unzip qhov no file mus rau qhov chaw ib ntus.
  3. Make sure you have access rights to the target installation directory.
  4. Launch the execution of the SetupSTM32CubeMonitor-RF.jar file, or launch manually the installation with java -jar <install path>/SetupSTM32CubeMonitor-RF.jar.
  5. An icon appears on the desktop. If the icon is not executable, edit its properties and select the option Allow executing file raws li qhov kev zov me nyuam, lossis los ntawm Ubuntu® 19.10 txuas ntxiv mus, thiab xaiv qhov kev xaiv tso cai tso tawm.

Cov ntaub ntawv hais txog COM chaw nres nkoj ntawm Ubuntu®
The modemmanager process checks the COM port when the board is plugged in. Due to this activity, the COM port is busy for a few seconds, and STM32CubeMonitor-RF cannot connect.
The users need to wait for the end of the modemmanager activity before opening the COM port. If the user does not require the modemmanager, it is possible to uninstall it with the command sudo apt-get purge modemmanager.
For the sniffer mode, the modem manager must be uninstalled or disabled through the command sudo systemctl stop ModemManager.service before connecting the sniffer device.
If the modem manager cannot be disabled, it is also possible to define rules so that the modem manager ignores the sniffer device. The 10-stsniffer.rules file, available in the ~/STMicroelectronics/STM32CubeMonitor-RF/sniffer directory can be copied in /etc/udev/rules.d.

Uninstall  

  1. Launch the uninstaller.jar located in the installation directory /STMicroelectronics/STM32CubeMonitor-RF/Uninstaller. If the icon is not executable, edit its properties and select the option Allow executing file raws li qhov program.
  2. Select Force deletion… and click on the Uninstall button.

mac OS® 

Nruab

  1. Download STM32CMonRFMac.zip.
  2. Unzip qhov no file mus rau qhov chaw ib ntus.
  3. Make sure you have access rights to the target installation directory.
  4. Double-click on the installer STM32CubeMonitor-RF.dmg file.
  5. Open the STM32CubeMonitor-RF new disk.
  6. Drag and drop the STM32CubeMonitor-RF shortcut to the Applications shortcut.
  7. Drag and drop the document folder to a location of your choice.

If an error with STM32CubeMonitor-RF an not be opened because it is from an unidentified developer occurs, the command sudo spctl –master-disable must be used to disable the verification.

Uninstall

  1. In the applications folder, select the STM32CubeMonitor-RF icon and move it to trash.
  2. In the user’s home directory, remove the folder Library/STM32CubeMonitor-RF.

If the Library folder is hidden:

  • Qhib Lub Finder.
  • Hold down Alt (Option) and choose Go from the drop-down menu bar at the top of the screen.
  • The Library folder is listed below the Home folder.

Cov khoom siv txhawb nqa los ntawm STM32CubeMonitor-RF

Cov khoom siv txhawb nqa
Cov cuab yeej tau sim nrog STM32WB55 Nucleo thiab dongle boards (P-NUCLEO-WB55), STM32WB15 Nucleo board (NUCLEO-WB15CC), STM32WB5MM-DK Discovery kit, STM32WBA5x Nucleo board, STM32WB6o board Nucleo board.

The boards based on STM32WBxx are compatible if they feature:

  • A connection through a USB Virtual COM port or a serial link and
  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Thread_Cli_Cmd for Thread
    • Phy_802_15_4_Cli for 802.15.4 RF test
    • Mac_802_15_4_Sniffer.bin for sniffer

The boards based on STM32WBAxx are compatible if they feature: • A connection through a serial link and

  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Thread_Cli_Cmd for Thread
    • Phy_802_15_4_Cli for 802.15.4 RF test
      The boards based on STM32WB0x are compatible if they feature:
  • A connection through a serial link and
  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Cov ntaub ntawv sib txuas ntawm cov cuab yeej thiab qhov chaw firmware tau piav qhia hauv Tshooj 2 ntawm tus neeg siv phau ntawv STM32CubeMonitor-RF software cuab yeej rau kev ntsuas kev ua haujlwm wireless (UM2288).

Tshaj tawm cov ntaub ntawv

Cov yam ntxwv tshiab/txhim kho

  • Alignment with STM32CubeWB firmware 1.23.0
  • Alignment with STM32CubeWBA firmware 1.7.0
  • Upgrade of Java® runtime version from 17.0.10 to 21.0.04
  • Upgrade of supported OpenThread version to 1.4.0 API 377
  • Support of command-line interface (CLI)

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issue 64748 – Add a dialog to select the beacon file
  • Fixes issue 202582 – [802.15.4 Sniffer] Incorrect RSS report value
  • Fixes issue 204195 – Some ACI/HCI commands do not send 16-bit UUID parameter
  • Fixes issue 204302 – VS_HCI_C1_DEVICE_INFORMATION DBGMCU_ICODE typo – DBGMCU_ICODER for STM32WBA
  • Fixes issue 204560 – [STM32WB0] Transmission packet count is abnormal on PER test

Kev txwv

  • When the device under test is disconnected, the software might not immediately detect the disconnection. In this case, an error is reported when a new command is sent. If the board is not detected after the error, it is necessary to unplug it and then reconnect it.
  • For sniffer on macOS®, the sniffer Python™ file yuav tsum tau teem nrog txoj cai executable tom qab luam. Cov lus txib yog chmod+x stm32cubeMonRf_sniffer.py.
  • STM32WB firmware versions ua ntej 1.16 tsis tau txais kev txhawb nqa, yuav tsum muaj qhov hloov tshiab tshiab ntxiv.
  • Thaum STM32WB0x Bluetooth® LE RF xeem thiab STM32WBAxx RX xeem, RSSI ntsuas qhov tseem ceeb tsis muab.
  • Lub Beacon thiab ACI Utilities panels tsis ua haujlwm rau STM32WB05N.
  • Rau ob qho tib si STM32WBxx thiab STM32WBAx, hauv Bluetooth® LE RX thiab PER kev xeem, PHY tus nqi 0x04 tau thov tab sis tsis txhawb nqa los ntawm tus txais. Qhov no ua rau tsis tau txais pob ntawv.

Daim ntawv tso cai
STM32CubeMonRF raug xa tawm raws li SLA0048 daim ntawv tso cai software daim ntawv cog lus thiab nws cov ntsiab lus ntxiv daim ntawv tso cai.

STM32CubeMonitor-RF tso tawm cov ntaub ntawv

STM32CubeMonitor-RF V1.5.0
Tool first version to support Bluetooth® Low Energy features of STM32WB55xx.
Versions 1.x.y have only Bluetooth® Low Energy support.

STM32CubeMonitor-RF V2.1.0
Addition of OpenThread support in the tool

STM32CubeMonitor-RF V2.2.0

  • Improvement of OpenThread command windows: Option to clear windows/history, details about OT commands selected in the tree
  • Addition of read param and set param buttons for OT commands used to read or set parameters
  • Addition of scripts for OpenThread
  • It is possible to add a loop in the script (refer to the user manual for details)
  • User interface update: the disabled items are now colored in gray
  • Implementation of search command for threads
  • Addition of the selection of Bluetooth® Low Energy PHY and modulation index
  • In Bluetooth® Low Energy RF tests, the frequency can be changed when the test is running

STM32CubeMonitor-RF V2.2.1

Cov yam ntxwv tshiab/txhim kho
The OTA download procedure is updated: When the target device configuration is in OTA loader mode, the target address is incremented by one. STM32CubeMonitor-RF now uses the incremented address for the download.
The list of OpenThread commands is aligned with the Thread® stack.

STM32CubeMonitor-RF V2.3.0

Cov yam ntxwv tshiab/txhim kho

  • Alignment with STM32WB55 cube firmware 1.0.0
  • Addition of 802.15.4 RF tests
  • New features in the ACI Utilities panel:
  • The discovery of remote Bluetooth® Low Energy devices
  • Interaction with the services of remote devices

STM32CubeMonitor-RF V2.4.0

Cov yam ntxwv tshiab/txhim kho

  • Alignment with STM32WB cube firmware 1.1.1
  • Support the over-the-air firmware update of the wireless stack (FUOTA).
  • Optimize FUOTA connection parameters to increase performance. Adds a warning if the address is below 0x6000.
  • Correction of UART detection issue on Windows® 10
  • The tool properly uses the write without response function to write a characteristic with write without response permission.
  • Update the device name in the device information box.
  • Fix the value of HCI_LE_SET_EVENT_MASK.
  • Correction of the text about the error reason description
  • Fix issues with OpenThread scripts.
  • Set a maximum size for graphs.
  • Update some control locks to prevent wrong actions from the user.

STM32CubeMonitor-RF V2.5.0

Cov yam ntxwv tshiab/txhim kho

  • Network Explorer is added to a new tab of Thread® mode.
  • This feature displays the connected Thread® devices and the connections between them.

STM32CubeMonitor–RF v 2.6.0

Cov yam ntxwv tshiab/txhim kho

RF tests are added.
In the transmitter test, the sending of MAC frames is available. The user defines the frame.
In the receiver test, the LQI, ED, and CCA tests are available and the PER test shows the decoded frames.

Tsau teeb meem

Qhov kev tso tawm no: 

  • Updates the C1_Read_Device_Information command description,
  • Disables the navigation link when the 802.15.4 receiver test is in progress,
  • Updates ST logo and colors,
  • Fixes the blank popup message displayed when the script detects an error,
  • Disables the start button as soon as the channel list is inconsistent in the 802.15.4 PER multichannel test,
  • And includes a workaround to prevent freeze observed on a serial port with macOS®.

STM32CubeMonitor-RF V2.7.0

Cov yam ntxwv tshiab/txhim kho
Hloov tshiab OpenThread API nrog version 1.1.0. Ntxiv OpenThread CoAP ruaj ntseg API. Ntxiv 802.15.4 sniffer hom.

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes the address bytes inverted in the OTA updater panel,
  • Fixes the OpenThread network explore button label management,
  • Fixes the behavior of the parameter field when the parameter is from the terminal and is wrong,
  • Fixes the naming of Bluetooth® Low Energy commands according to the AN5270 specification,
  • Fixes the connection fail behavior of the OpenThread COM port,
  • Fixes Bluetooth® Low Energy tester connection fail behavior on Linux®,
  • Fixes OpenThread panId hexadecimal value display,
  • Improve SBSFU OTA and tests,
  • Fixes ACI client characteristic configuration after reconnection.

STM32CubeMonitor-RF V2.7.1

Cov yam ntxwv tshiab/txhim kho

Sniffer fixes.

Tsau teeb meem

Qhov kev tso tawm no:
Fixes the error on quick Wireshark sniffer stop then start.
Removes two extra bytes in sniffed data.

STM32CubeMonitor-RF V2.8.0

Cov yam ntxwv tshiab/txhim kho

OTA improvement:

  • Adds an option in the OTA panel to increase the packet length (MTU) to optimize speed.
  • Adds a menu to select the target. It is required to compute the number of sectors to erase for SMT32WB15xx.
  • Removes the modulations not suitable for the PER test in the PER picklist.

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issue 102779: Displaying offset and attribute data length is reversed for ACI_GATT_ATTRIBUTE_MODIFIED_EVENT.
  • Aligns the message HCI_ATT_EXCHANGE_MTU_RESP_EVENT with AN5270.
  • Fixes the attribute name in HCI_LE_DATA_LENGTH_CHANGE_EVENT.
  • Improves the welcome screen layout for small screens.

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issue 64425: Send command button unlocked during OTA transfer.
  • Fixes issue 115533: During the OTA update, the issue in the
  • ACI_GAP_START_GENERAL_DISCOVERY_PROC command.
  • Fixes issue 115760:
  • During OTA updates, when the Optimize MTU size check box is ticked, the download stops after the MTU size exchange.
  • Fixes issue 117927: change address type to public device address for OTA.
  • Fixes issue 118377: wrong sector size erased before OTA transfer.
  • Set OTA block size according to MTU size exchange.

Cov yam ntxwv tshiab/txhim kho

  • Adds compatibility with the OpenThread stack of STM32Cube_FW_V1.14.0. This stack is based on the OpenThread 1.2 stack and supports the O.T. 1.1 commands.
  • Adds new Bluetooth® Low Energy commands and events. Updates some existing commands to be compatible with the release 1.14.0 of the stack.

Commands added:

    • HCI_LE_READ_TRANSMIT_POWER,
    • HCI_LE_SET_PRIVACY_MODE,
    • ACI_GAP_ADD_DEVICES_TO_LIST,
    • HCI_LE_READ_RF_PATH_COMPENSATION,
    • HCI_LE_WRITE_RF_PATH_COMPENSATION
  • Events added:
    • HCI_LE_EXTENDED_ADVERTISING_REPORT_EVENT,
    • HCI_LE_SCAN_TIMEOUT_EVENT,
    • HCI_LE_ADVERTISING_SET_TERMINATED_EVENT,
    • HCI_LE_SCAN_REQUEST_RECEIVED_EVENT,
    • HCI_LE_CHANNEL_SELECTION_ALGORITHM_EVENT
  • Command removed:
    • ACI_GAP_START_NAME_DISCOVERY_PROC
  • Command updated (parameters or description):
    • ACI_HAL_GET_LINK_STATUS,
    • HCI_SET_CONTROLLER_TO_HOST_FLOW_CONTROL,
    • HCI_HOST_BUFFER_SIZE,
    • ACI_HAL_WRITE_CONFIG_DATA,
    • ACI_GAP_SET_LIMITED_DISCOVERABLE,
    • ACI_GAP_SET_DISCOVERABLE,
    • ACI_GAP_SET_DIRECT_CONNECTABLE,
    • ACI_GAP_INIT,
    • ACI_GAP_START_GENERAL_CONNECTION_ESTABLISH_PROC,
    • ACI_GAP_START_SELECTIVE_CONNECTION_ESTABLISH_PROC,
    • ACI_GAP_CREATE_CONNECTION,
    • ACI_GAP_SET_BROADCAST_MODE,
    • ACI_GAP_START_OBSERVATION_PROC,
    • ACI_GAP_GET_OOB_DATA,
    • ACI_GAP_SET_OOB_DATA,
    • ACI_GAP_ADD_DEVICES_TO_RESOLVING_LIST,
    • ACI_HAL_FW_ERROR_EVENT,
    • HCI_LE_READ_ADVERTISING_PHYSICAL_CHANNEL_TX_POWER,
    • HCI_LE_ENABLE_ENCRYPTION,
    • HCI_LE_LONG_TERM_KEY_REQUEST_NEGATIVE_REPLY,
    • HCI_LE_RECEIVER_TEST_V2,
    • HCI_LE_TRANSMITTER_TEST_V2,
    • ACI_HAL_WRITE_CONFIG_DATA,
    • ACI_GAP_SET_DIRECT_CONNECTABLE,
    • HCI_LE_SET_EVENT_MASK,
    • HCI_LE_TRANSMITTER_TEST

Hloov kho 802.15.4 sniffer firmware rau STM32WB55 Nucleo thiab tshiab firmware rau STM32WB55 USB dongle

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issue 130999: Some packets are missed in the PER test.
  • Fixes issue 110073: Some panId values cannot be set in the Network Explorer tab.

STM32CubeMonitor-RF V2.9.1

Cov yam ntxwv tshiab/txhim kho

  • Updates 802.15.4 sniffer firmware software.
  • Fixes some issues reported on version 2.9.0.
  • Fixes issue 131905: The Bluetooth® Low Energy TX LE PHY menu is not visible in RF tests.
  • Fixes issue 131913: The tools do not identify some Bluetooth® Low Energy versions.

Kev txwv
Qhov no version ntawm STM32CubeMonitor-RF tsis muab Extended advertising commands. Rau qee qhov kev ua haujlwm (FUOTA, ACI scan), Bluetooth® Tsawg Zog pawg nrog kev tshaj tawm qub yuav tsum tau siv. Xa mus rau tus neeg siv phau ntawv UM2288 kom pom cov firmware yuav tsum tau siv.

STM32CubeMonitor-RF V2.10.0

Cov yam ntxwv tshiab/txhim kho

  • Alignment with STM32CubeWB firmware 1.15.0
  • OpenThread 1.3 support
  • Bluetooth® Low Energy extended advertising support
  • Bluetooth® Low Energy commands alignment with AN5270 Rev. 16
  • New Bluetooth® Low Energy RSSI acquisition method

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issue 133389: A command with variable length crashes the tool.
  • Fixes issue 133695: Bluetooth® Low Energy missing
  • HCI_LE_TRANSMITTER_TEST_V2 PHY input parameter.
  • Fixes issue 134379: RF transmitter test, payload size is limited to 0x25.
  • Fixes issue 134013: Wrong text seen after launching and stopping tests by checking the Get RSSI box.

STM32CubeMonitor-RF V2.11.0

Cov yam ntxwv tshiab/txhim kho

  • Support of STM32WBAxx devices except for OTA firmware update
  • Continuous wave mode in the 802.15.4 transmitter test (STM32CubeWB firmware 1.11.0 and later)
  • Availability to save Bluetooth® Low Energy ACI log information in a csv formatted file
  • Alignment with STM32CubeWB firmware 1.16.0
  • Alignment with STM32CubeWBA firmware 1.0.0
  • Update of 802.15.4 sniffer firmware
  • Removal of 802.15.4 RX_Start command before RX_get and Rs_get_CCA

Tsau teeb meem
Qhov kev tso tawm no:

  • Fixes issue 139468: Advertising test generates all advertising channels without being selected
  • Fixes issue 142721: Event with the length of the next param on more than 1 byte is not managed
  • Fixes issue 142814: Unable to set some command parameters with variable length
  • Fixes issue 141445: VS_HCI_C1_WRITE_REGISTER – ERROR found in script results
  • Fixes issue 143362: The tool gets blocked when setting the variable param length to 0

Kev txwv

  • Qhov teeb meem tshiab 139237: Hauv ACI vaj huam sib luag, thaum tshaj tawm pib ua ntej kev luam theej duab, lub cuab yeej tsis tswj hwm lub cim tshaj tawm thiab lub xeev.
  • Qhov teeb meem tshiab hauv ACI Utilities vaj huam sib luag: Nws tsis tuaj yeem tso lub scan yog tias pib tshaj tawm. Kev tshaj tawm yuav tsum tau nres ua ntej.

STM32CubeMonitor-RF V2.12.0

Cov yam ntxwv tshiab/txhim kho

  • Alignment with STM32CubeWB firmware 1.17.0
  • Alignment with STM32CubeWBA firmware 1.1.0
  • Fix advertising issues using GAP commands instead of legacy
  • Add STM32WBA OTA firmware update support
  • Fix 802.15.4 sniffer issues around the Python™ script
  • Upgrade Java® runtime version from 8 to 17
  • Update missing Bluetooth® Low Energy parameters values and description

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issues 149148 and 149147: 802.15.4 sniffer leading into negative timestamps on Wireshark
  • Fixes issue 150852: Bluetooth® Low Energy OTA profile application could not be discovered on STM32WBAxx
  • Fixes issue 150870: Missing parameters description in HTML wireless interface
  • Fixes issue 147338: Gatt_Evt_Mask parameter must be a bit mask
  • Fixes issue 147386: Missing ACI command to control antenna switching mechanism for AoA/AoD
  • Fixes issue 139237: Improve the advertising mechanism

STM32CubeMonitor-RF V2.13.0

Cov yam ntxwv tshiab/txhim kho

  • Alignment with STM32CubeWB firmware 1.18.0
  • Alignment with STM32CubeWBA firmware 1.2.0
  • Add 802.15.4 support for STM32WBAxx devices
  • Add OpenThread support for STM32WBAxx devices

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issue 161417: Combo Box not displayed on 802.15.4 Start TX
  • Fixes issue 159767: Replace the Twitter bird logo with the X logo
  • Fixes issue 152865: Transfer of firmware via OTA from WB55 device connected to STM32CubeMonitor-RF to device type WBA5x not active
  • Fixes issue 156240: Missing interval of parameter’s possible values in tool description
  • Fixes issue 95745 [802.15.4 RF]: No information displayed about the device ID connected
  • Fixes issue 164784: Error using online beacon with a random address
  • Fixes issues 163644 and 166039: Error using advertising with a random or public not connectable device address
  • Fixes issue 69229: Scanning cannot stop when advertising is running.

STM32CubeMonitor-RF V2.14.0

Cov yam ntxwv tshiab/txhim kho

  • Alignment with STM32CubeWB firmware 1.19.0
  • Alignment with STM32CubeWBA firmware 1.3.0
  • Upgrade supported OpenThread version to 1.3.0 API 340

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issues 165981 and 172847 to stabilize Linux® and macOS®, 802.15.4 sniffer behavior
  • Fixes issues 165552 and 166762 to improve scan and advertising features
  • Fixes issue 172471 to extend STM32WBA 802.15.4 power range

STM32CubeMonitor-RF V2.15.0

Cov yam ntxwv tshiab/txhim kho

  • Alignment with STM32CubeWB firmware 1.20.0
  • Alignment with STM32CubeWBA firmware 1.4.0
  • Add support of STM32CubeWB0 firmware 1.0.0
  • Upgrade Java® runtime version from 17.0.2 to 17.0.10

Tsau teeb meem

  • Qhov kev tso tawm no:
  • Fixes issue 174238 – 802.15.4 sniffer malformed packet in Wireshark

STM32CubeMonitor-RF V2.15.1

Cov yam ntxwv tshiab/txhim kho
Add support of STM32WB05N firmware 1.5.1

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issue 185689: The first value of power in the ACI Utilities panel is not displayed for STM32WB or STM32WBA
  • Fixes issue 185753: Add STM32WB06 in STM32CubeMonitor-RF

Cov yam ntxwv tshiab/txhim kho

  • Alignment with STM32CubeWB firmware 1.21.0
  • Alignment with STM32CubeWBA firmware 1.5.0
  • Alignment with STM32CubeWB0 firmware 1.1.0
  • Upgrade supported OpenThread stack to API 420 version 1.3.0
  • Update 802.15.4 sniffer firmware
  • Add STM32WB0X FUOTA support
  • Improve path management

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issue 193557 – Vulnerability of commons-io
  • Fixes issue 190807 – FUOTA image base address management
  • Fixes issue 188490 – WBA PER test change to get RSSI
  • Fixes issue 191135 – Cannot connect to STM32WB15
  • Fixes issue 190091 – Connection to WB05N does not work the first time
  • Fixes issue 190126 – OpenThread, device information menu disabled
  • Fixes issue 188719 – Error in baud rate value
    3.23 STM32CubeMonitor-RF V2.17.0
    3.23.1 New features/enhancements
  • Alignment with STM32CubeWB firmware 1.22.0
  • Alignment with STM32CubeWBA firmware 1.6.0
  • Alignment with STM32CubeWB0 firmware 1.2.0
  • Support of STM32WBA6x devices

Tsau teeb meem

Qhov kev tso tawm no:

  • Fixes issue 185894 – Support STM32WB1x BLE_Stack_light_fw upgrade
  • Fixes issue 195370 – ACI_GAP_SET_NON_DISCOVERABLE return Command disallowed error
  • Fixes issue 196631 – Could not perform RF Tests on WB05X

Kev kho keeb kwm

Table 2. Cov ntaub ntawv kho dua tshiab

Hnub tim Kev kho dua Hloov
02 - Peb 2017 1 Kev tso tawm thawj zaug.
  Peb 25-Apr-2017   2 Modified for release 1.2.0:–  updated Section 2: Release information–  updated Section 2.3: Restrictions–  added Section 3.2: STM32CubeMonitor-RF V1.2.0 information
   27-Lub Ib Hlis-2017    3 Changed document classification to ST Restricted.Modified for release 1.3.0, hence updated document title and addedSection 3.3: STM32CubeMonitor-RF V1.3.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3: Setup procedure, Kev teeb tsa lub cuab yeej, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions thiab Section 3.2: STM32CubeMonitor-RF V1.2.0 information.
    Peb 29-Sep-2017     4 Hloov kho rau kev tso tawm 1.4.0, yog li hloov kho cov ntaub ntawv npe thiab ntxivSection 3.4: STM32CubeMonitor-RF V1.4.0 information.Updated Nqe 1.1: Tshajview, Section 1.2: Host PC system requirements, Section 1.3.1: Windows, Section 1.4: Devices supported by STM32CubeMonitor-RF, Section 2.1: New features/enhancements, Section 2.2: Fixed issues thiab Section 2.3: Restrictions.Added Section 1.3.2: Linux®, Section 1.3.3: macOS®, thiab Section 2.4: Licensing.Updated Table 1: STM32CubeMonitor-RF 1.4.0 release summary.
   29- Peb Hlis-2018    5 Hloov kho rau kev tso tawm 1.5.0, yog li hloov kho cov ntaub ntawv npe thiab ntxivSection 3.5: STM32CubeMonitor-RF V1.5.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3.2: Linux®, Kev teeb tsa lub cuab yeej, Section 2.1: New features/enhancements, Section 2.2: Fixed issues thiab Section 2.3: Restrictions.Updated Table 1: STM32CubeMonitor-RF 1.5.0 release summary thiabTable 2: List of licenses.
   Peb 14-2018    6 Hloov kho rau kev tso tawm 2.1.0, yog li hloov kho cov ntaub ntawv npe thiab ntxivSection 3.6: STM32CubeMonitor-RF V2.1.0 information.Updated Nqe 1.1: Tshajview, Section 1.2: Host PC system requirements, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions.Hloov tshiab Table 1: STM32CubeMonitor-RF 2.1.0 release summary thiabTable 2: List of licenses.
   24-Aug-2018    7 Hloov kho rau kev tso tawm 2.2.0, yog li hloov kho cov ntaub ntawv npe thiab ntxivSection 3.7: STM32CubeMonitor-RF V2.2.0 information.Updated Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.2: Restrictions.Updated Table 1: STM32CubeMonitor-RF 2.3.0 release summary thiabTable 2: List of licenses.
Hnub tim Kev kho dua Hloov
   15-Aug-2018    8 Hloov kho rau kev tso tawm 2.2.1, yog li hloov kho cov ntaub ntawv npe thiab ntxivSection 3.8: STM32CubeMonitor-RF V2.2.1 information.Updated Nqe 1.1: Tshajview, Section 1.3.2: Linux®, Section 1.3.3: macOS®, Section 2.1: New features/enhancements, thiab Section 2.2: Restrictions.Removed former Section 2.2: Fixed issues.
  15- Peb-2019   9 Updated:–  Title, Table 1, thiab Tshooj 2 switch to the 2.3.0 release–  Tshooj 3 former releases history–  Nqe 1.1: Tshajview to add OpenThread and 802.15.4 RF–  Section 1.3: Setup procedure with different OS
  Peb 12-2019   10 Updated:–  Title, Table 1, thiab Tshooj 2 switch to the 2.4.0 release–  Table 2 jSerialComm version–  Tshooj 3 former releases history
  Peb 03-Apr-2020   11 Updated:–  Title, Table 1, thiab Tshooj 2 switch to the 2.5.0 release–  Table 2 Inno setup version–  Tshooj 3 former releases history
  13-Nov-2020   12 Updated:–  Title, Table 1, thiab Tshooj 2 switch to the 2.6.0 release–  Table 2 thiab Table 3 details in an added copyright column–  Tshooj 3 former releases history
  08- Peb-2021   13 Updated:–  Title, Table 1, Tshooj 1, thiab Tshooj 2 switch to the 2.7.0 release with new802.15.4 sniffer mode and Host PC system yuav tsum–  Table 3 Java SE and Java FX version–  Tshooj 3 former releases history
  08-Lub Ib Hlis-2021   14 Updated:–  Title, Table 1, thiab Tshooj 2 switch to the 2.7.1 release with 802.15.4 sniffer fixes–  Tshooj 3 former releases history
    Peb 15-2021     15 Updated:–  Title, Table 1, thiab Tshooj 2 switch to the 2.8.0 release with OTA speed improvement and new OTA option for STM32WB15xx–  Tshooj 1.4 NUCLEO-WB15CC support and test firmware explanation–  Table 2 with SLA0048 in Daim ntawv tso cai–  Table 3 with Inno setup version–  Tshooj 3 former releases history
  21-Nov-2021   16 Updated:–  Title, Table 1, thiab Tshooj 2.1 switch to the 2.8.1 release with fixes for Bluetooth® Low Energy OTA–  Tshooj 3 former releases history
Hnub tim Kev kho dua Hloov
Peb 07-2022 17 Hloov tshiab:
  • Lub npe, Table 1, thiab Tshooj 2.1 switch to the 2.9.0 release
  • Python™ card version in Software xav tau
  • Section 2.4: Licensing replacing tables with the suitable license agreement statement
  • Tshooj 3 former releases history
Peb 14-Sep-2022 18 Hloov tshiab:
  • Lub npe, Table 1, thiab Tshooj 2 switch to the 2.9.1 release
  • Java FX-GTK3 conflict moved from Kev txwv to Linux® Nruab
  • Tshooj 3 former releases history
29-Nov-2022 19 Hloov tshiab:
  • Lub npe, Table 1, thiab Tshooj 2 switch to the 2.10.0 release
  • Removed note on fixed GTK2 issue in Linux® Nruab
  • Tshooj 3 former releases history
03 - Peb 2023 20 Hloov tshiab:
  • Lub npe, Table 1, thiab Tshooj 2 switch to the 2.11.0 release
  • Tshooj 3 former releases history
Peb 4-2023 21 Hloov tshiab:

Lub npe, Table 1, thiab Tshooj 2 switch to the 2.12.0 release
Tshooj 3 former releases history
23-Nov-2023 22 Hloov tshiab:

Lub npe, Table 1, thiab Tshooj 2 switch to the 2.13.0 release

Tshooj 3 former releases history
14 - Peb 2024 23 Hloov tshiab:
  • Lub npe, Table 1, thiab Tshooj 2 switch to the 2.14.0 release
  • macOS® versions in Txhawb kev khiav hauj lwm systems thiab architectures
  • Tshooj 3 former releases history
Peb 01-2024 24 Hloov tshiab:
  • Lub npe, Table 1, thiab Tshooj 2 switch to the 2.15.0 release
  • Nucleo boards in Cov khoom siv txhawb nqa los ntawm STM32CubeMonitor-RF
  • Tshooj 3 former releases history
Peb 12-Sep-2024 25 Hloov tshiab:
Lub npe, Table 1, thiab Nqe 2, suav nrog Kev txwv, switch to the 2.15.1 releaseTshooj 3 former releases history
22-Nov-2024 26 Hloov tshiab:
  • Lub npe, Table 1, thiab Nqe 2, suav nrog Kev txwv, switch to the 2.16.0 release
  • Linux® and macOS® versions in Txhawb kev khiav hauj lwm systems thiab architectures
  • Tshooj 3 former releases history
Hnub tim Kev kho dua Hloov
 18- Peb-2025  27 Hloov tshiab:
Lub npe, Table 1, Section 1.4, Section 2.1, Section 2, suav nrog
Kev txwv, switch to the 2.17.0 release
Tshooj 3 former releases history
23-Lub Ib Hlis-2025 28 Hloov tshiab:

Lub npe, Rooj 1, Tshooj 2, suav nrog Kev txwv, switch to the 2.18.0 release

Tshooj 3 former releases history

CEEB TOOM - Nyeem ua tib zoo nyeem

  • STMicroelectronics NV thiab nws cov chaw ua haujlwm (“ST”) muaj cai hloov pauv, kho, txhim kho, hloov kho, thiab txhim kho rau ST cov khoom thiab / lossis cov ntaub ntawv no txhua lub sijhawm yam tsis muaj ntawv ceeb toom. Cov neeg yuav khoom yuav tsum tau txais cov ntaub ntawv tseem ceeb ntawm ST cov khoom ua ntej muab xaj. ST cov khoom raug muag raws li ST cov nqe lus thiab cov xwm txheej ntawm kev muag khoom nyob rau hauv qhov chaw thaum lub sijhawm lees paub kev txiav txim.
  • Cov neeg yuav khoom tsuas yog lub luag haujlwm rau kev xaiv, xaiv, thiab siv cov khoom ST thiab ST xav tias tsis muaj kev lav phib xaub rau daim ntawv thov kev pab lossis kev tsim khoom ntawm cov neeg yuav khoom.
  • Tsis muaj daim ntawv tso cai, qhia lossis qhia, rau txhua txoj cai kev txawj ntse tau tso cai los ntawm ST ntawm no.
  • Kev muag khoom ntawm ST cov khoom lag luam nrog cov kev cai sib txawv ntawm cov ntaub ntawv tau teev tseg hauv qab no yuav tsis muaj kev lees paub los ntawm ST rau cov khoom lag luam zoo li no.
  • ST thiab ST logo yog cov cim lag luam ntawm ST. Yog xav paub ntxiv txog ST cov cim lag luam, xa mus rau www.st.com/trademarks  Tag nrho lwm cov khoom lag luam lossis cov kev pabcuam yog cov khoom ntiag tug ntawm lawv cov tswv.
  • Cov ntaub ntawv hauv daim ntawv no hloov pauv thiab hloov cov ntaub ntawv yav dhau los uas tau muab rau hauv ib qho ua ntej ntawm daim ntawv no.
  • © 2025 STMicroelectronics - All rights reserved

Cov ntaub ntawv / Cov ntaub ntawv

STMicroelectronics RN0104 STM32 Cube Monitor RF [ua pdf] Cov neeg siv phau ntawv qhia
RN0104 STM32 Lub voos xwmfab saib RF, RN0104, STM32 Lub voos xwmfab saib RF, Lub voos xwmfab saib RF, saib RF

Cov ntaub ntawv

Cia ib saib

Koj email chaw nyob yuav tsis raug luam tawm. Cov teb uas yuav tsum tau muaj yog cim *