STMicroelectronics RN0104 STM32 Kubo Monitore RF
Sarrera
Argitalpen-ohar hau aldian-aldian eguneratzen da STM32CubeMonRF-ren (aurrerantzean STM32CubeMonitor-RF) bilakaeraren, arazoen eta mugen berri izateko.
Egiaztatu STMicroelectronics-en laguntza webgunean www.st.com for the newest version. For the latest release summary, refer to Table 1.
1. taula. STM32CubeMonRF 2.18.0 bertsioaren laburpena
| Mota | Laburpena |
| Askapen txikia |
|
Bezeroarentzako arreta
For more information or help concerning STM32CubeMonitor-RF, contact the nearest STMicroelectronics sales office or use the ST community at community.st.com. For a complete list of STMicroelectronics offices and distributors, refer to the www.st.com web orrialdea.
Software eguneraketak
Softwarearen eguneraketak eta azken dokumentazio guztia STMicroelectronics laguntza-zerbitzutik deskargatu daitezke. web orrialdean www.st.com/stm32cubemonrf
Informazio orokorra
Amaituview
STM32CubeMonitor-RF is a tool provided to help designers to:
- Perform RF (radio frequency) tests of Bluetooth® LE applications
- Perform RF (radio frequency) tests of 802.15.4 applications
- Send commands to Bluetooth® LE parts to perform tests
- Configure Bluetooth® LE beacons and manage file over-the-air (OTA) transfers
- Discover Bluetooth® LE device profileeta zerbitzuekin elkarreragin
- Send commands to OpenThread parts to perform tests
- Visualize Thread device connections
- Sniff 802.15.4 network
Software hau STM32WB, STM32WB0 eta STM32WBA serieetako mikrokontrolagailuei aplikatzen zaie, Arm®(a) nukleoetan oinarrituta.
Ostalari PC sistemaren eskakizunak
Onartutako sistema eragileak eta arkitekturak
- Windows®(b) 10 and 11, 64-bit (x64)
- Linux®(c) Ubuntu®(d) LTS 22.04 and LTS 24.04
- macOS®(e) 14 (Sonoma), macOS®(e) 15 (Sequoia)
Software-eskakizunak
For Linux®, the Java®(f) runtime environment (JRE™) is required for the installer. For 802.15.4 sniffer only:
- Wireshark v2.4.6 or later is available from https://www.wireshark.org
- Python™ card v3.8 or later is available from https://www.python.org/downloads
- pySerial v3.4 or later, available from https://pypi.org/project/pyserial
- Arm Arm Limited-en (edo haren filialen) marka erregistratua da AEBetan eta / edo beste leku batzuetan.
- Windows Microsoft konpainia taldearen marka komertziala da.
- Linux® Linus Torvalds-en marka erregistratua da.
- Ubuntu® is a registered trademark of Canonical Ltd.
- macOS® Apple Inc.-ren marka komertziala da, AEBetan eta beste herrialde eta eskualde batzuetan erregistratua.
- Oracle eta Java Oracleren eta/edo bere afiliatuen marka erregistratuak dira.
Konfigurazio prozedura
Windows®
Instalatu
If an older version of STM32CubeMonitor-RF is already installed, the existing version must be uninstalled before installing the new one. The user must have administrator rights on the computer to run the installation.
- Deskargatu STM32CMonRFWin.zip fitxategia.
- Deskonprimitu hau file aldi baterako kokapen batera.
- Launch STM32CubeMonitor-RF.exe to be guided through the setup process.
Desinstalatu
To uninstall STM32CubeMonitor-RF, follow the steps below:
- Open the Windows Control panel.
- Select Programs and Features to display the list of programs installed on the computer.
- Left-click on STM32CubeMonitor-RF from the STMicroelectronics publisher and select the Uninstall function.
Linux®
Software-eskakizunak
Linux® instalatzailearentzat Java® exekuzio-ingurunea beharrezkoa da. apt-get install default-jdk komandoarekin edo pakete-kudeatzailearekin instala daiteke.
Instalatu
- Deskargatu STM32CMonRFLin.tar.gz fitxategia.
- Deskonprimitu hau file aldi baterako kokapen batera.
- Make sure you have access rights to the target installation directory.
- Launch the execution of the SetupSTM32CubeMonitor-RF.jar file, or launch manually the installation with java -jar <install path>/SetupSTM32CubeMonitor-RF.jar.
- An icon appears on the desktop. If the icon is not executable, edit its properties and select the option Allow executing file programa gisa, edo Ubuntu® 19.10etik aurrera, eta aukeratu Abiaraztea baimendu aukera.
Ubuntu®-ko COM atakari buruzko informazioa
The modemmanager process checks the COM port when the board is plugged in. Due to this activity, the COM port is busy for a few seconds, and STM32CubeMonitor-RF cannot connect.
The users need to wait for the end of the modemmanager activity before opening the COM port. If the user does not require the modemmanager, it is possible to uninstall it with the command sudo apt-get purge modemmanager.
For the sniffer mode, the modem manager must be uninstalled or disabled through the command sudo systemctl stop ModemManager.service before connecting the sniffer device.
If the modem manager cannot be disabled, it is also possible to define rules so that the modem manager ignores the sniffer device. The 10-stsniffer.rules file, available in the ~/STMicroelectronics/STM32CubeMonitor-RF/sniffer directory can be copied in /etc/udev/rules.d.
Desinstalatu
- Launch the uninstaller.jar located in the installation directory /STMicroelectronics/STM32CubeMonitor-RF/Uninstaller. If the icon is not executable, edit its properties and select the option Allow executing file programa gisa.
- Select Force deletion… and click on the Uninstall button.
macOS®
Instalatu
- Deskargatu STM32CMonRFMac.zip fitxategia.
- Deskonprimitu hau file aldi baterako kokapen batera.
- Make sure you have access rights to the target installation directory.
- Double-click on the installer STM32CubeMonitor-RF.dmg file.
- Open the STM32CubeMonitor-RF new disk.
- Drag and drop the STM32CubeMonitor-RF shortcut to the Applications shortcut.
- Drag and drop the document folder to a location of your choice.
If an error with STM32CubeMonitor-RF an not be opened because it is from an unidentified developer occurs, the command sudo spctl –master-disable must be used to disable the verification.
Desinstalatu
- In the applications folder, select the STM32CubeMonitor-RF icon and move it to trash.
- In the user’s home directory, remove the folder Library/STM32CubeMonitor-RF.
If the Library folder is hidden:
- Ireki Bilatzailea.
- Hold down Alt (Option) and choose Go from the drop-down menu bar at the top of the screen.
- The Library folder is listed below the Home folder.
STM32CubeMonitor-RF-k onartzen dituen gailuak
Onartutako gailuak
Tresna STM32WB55 Nucleo eta dongle plakekin (P-NUCLEO-WB55), STM32WB15 Nucleo plakarekin (NUCLEO-WB15CC), STM32WB5MM-DK Discovery kitarekin, STM32WBA5x Nucleo plakarekin, STM32WBA6x Nucleo plakarekin eta STM32WB0x Nucleo plakarekin probatu da.
The boards based on STM32WBxx are compatible if they feature:
- A connection through a USB Virtual COM port or a serial link and
- A test firmware:
- Transparent mode for Bluetooth® LE
- Thread_Cli_Cmd for Thread
- Phy_802_15_4_Cli for 802.15.4 RF test
- Mac_802_15_4_Sniffer.bin for sniffer
The boards based on STM32WBAxx are compatible if they feature: • A connection through a serial link and
- A test firmware:
- Transparent mode for Bluetooth® LE
- Thread_Cli_Cmd for Thread
- Phy_802_15_4_Cli for 802.15.4 RF test
The boards based on STM32WB0x are compatible if they feature:
- A connection through a serial link and
- A test firmware:
- Transparent mode for Bluetooth® LE
- Gailuaren konexioaren xehetasunak eta firmwarearen kokapena STM2CubeMonitor-RF software tresna haririk gabeko errendimenduaren neurketarako (UM32) erabiltzailearen eskuliburuko 2288. atalean deskribatzen dira.
Askatu informazioa
Ezaugarri/hobekuntza berriak
- Alignment with STM32CubeWB firmware 1.23.0
- Alignment with STM32CubeWBA firmware 1.7.0
- Upgrade of Java® runtime version from 17.0.10 to 21.0.04
- Upgrade of supported OpenThread version to 1.4.0 API 377
- Support of command-line interface (CLI)
Arazoak konponduta
Argitalpen hau:
- Fixes issue 64748 – Add a dialog to select the beacon file
- Fixes issue 202582 – [802.15.4 Sniffer] Incorrect RSS report value
- Fixes issue 204195 – Some ACI/HCI commands do not send 16-bit UUID parameter
- Fixes issue 204302 – VS_HCI_C1_DEVICE_INFORMATION DBGMCU_ICODE typo – DBGMCU_ICODER for STM32WBA
- Fixes issue 204560 – [STM32WB0] Transmission packet count is abnormal on PER test
Murrizketak
- When the device under test is disconnected, the software might not immediately detect the disconnection. In this case, an error is reported when a new command is sent. If the board is not detected after the error, it is necessary to unplug it and then reconnect it.
- For sniffer on macOS®, the sniffer Python™ file Kopiatu ondoren exekutagarri batekin ezarri behar da. Komandoa chmod+x stm32cubeMonRf_sniffer.py da.
- STM32WB 1.16 baino lehenagoko firmware bertsioak ez dira onartzen, bertsio berriago bat behar da.
- STM32WB0x Bluetooth® LE RF probetan eta STM32WBAxx RX probetan, ez dira RSSI neurketa-balioak ematen.
- Beacon eta ACI Utilities panelak ez dira funtzionatzen STM32WB05N-rentzat.
- STM32WBxx eta STM32WBAx-entzat, Bluetooth® LE RX eta PER probetan, 0x04 PHY balioa proposatzen da baina hargailuak ez du onartzen. Horren ondorioz, ez da paketerik jasotzen.
Lizentzia ematea
STM32CubeMonRF SLA0048 software lizentzia-kontratuaren eta haren lizentzia-baldintza gehigarrien pean entregatzen da.
STM32CubeMonitor-RF argitalpenaren informazioa
STM32CubeMonitor-RF V1.5.0
Tool first version to support Bluetooth® Low Energy features of STM32WB55xx.
Versions 1.x.y have only Bluetooth® Low Energy support.
STM32CubeMonitor-RF V2.1.0
Addition of OpenThread support in the tool
STM32CubeMonitor-RF V2.2.0
- Improvement of OpenThread command windows: Option to clear windows/history, details about OT commands selected in the tree
- Addition of read param and set param buttons for OT commands used to read or set parameters
- Addition of scripts for OpenThread
- It is possible to add a loop in the script (refer to the user manual for details)
- User interface update: the disabled items are now colored in gray
- Implementation of search command for threads
- Addition of the selection of Bluetooth® Low Energy PHY and modulation index
- In Bluetooth® Low Energy RF tests, the frequency can be changed when the test is running
STM32CubeMonitor-RF V2.2.1
Ezaugarri/hobekuntza berriak
The OTA download procedure is updated: When the target device configuration is in OTA loader mode, the target address is incremented by one. STM32CubeMonitor-RF now uses the incremented address for the download.
The list of OpenThread commands is aligned with the Thread® stack.
STM32CubeMonitor-RF V2.3.0
Ezaugarri/hobekuntza berriak
- Alignment with STM32WB55 cube firmware 1.0.0
- Addition of 802.15.4 RF tests
- New features in the ACI Utilities panel:
- The discovery of remote Bluetooth® Low Energy devices
- Interaction with the services of remote devices
STM32CubeMonitor-RF V2.4.0
Ezaugarri/hobekuntza berriak
- Alignment with STM32WB cube firmware 1.1.1
- Support the over-the-air firmware update of the wireless stack (FUOTA).
- Optimize FUOTA connection parameters to increase performance. Adds a warning if the address is below 0x6000.
- Correction of UART detection issue on Windows® 10
- The tool properly uses the write without response function to write a characteristic with write without response permission.
- Update the device name in the device information box.
- Fix the value of HCI_LE_SET_EVENT_MASK.
- Correction of the text about the error reason description
- Fix issues with OpenThread scripts.
- Set a maximum size for graphs.
- Update some control locks to prevent wrong actions from the user.
STM32CubeMonitor-RF V2.5.0
Ezaugarri/hobekuntza berriak
- Network Explorer is added to a new tab of Thread® mode.
- This feature displays the connected Thread® devices and the connections between them.
STM32CubeMonitor–RF V2.6.0
Ezaugarri/hobekuntza berriak
RF tests are added.
In the transmitter test, the sending of MAC frames is available. The user defines the frame.
In the receiver test, the LQI, ED, and CCA tests are available and the PER test shows the decoded frames.
Arazoak konponduta
Argitalpen hau:
- Updates the C1_Read_Device_Information command description,
- Disables the navigation link when the 802.15.4 receiver test is in progress,
- Updates ST logo and colors,
- Fixes the blank popup message displayed when the script detects an error,
- Disables the start button as soon as the channel list is inconsistent in the 802.15.4 PER multichannel test,
- And includes a workaround to prevent freeze observed on a serial port with macOS®.
STM32CubeMonitor-RF V2.7.0
Ezaugarri/hobekuntza berriak
OpenThread APIa 1.1.0 bertsioarekin eguneratzen du. OpenThread CoAP API segurua gehitzen du. 802.15.4 sniffer modua gehitzen du.
Arazoak konponduta
Argitalpen hau:
- Fixes the address bytes inverted in the OTA updater panel,
- Fixes the OpenThread network explore button label management,
- Fixes the behavior of the parameter field when the parameter is from the terminal and is wrong,
- Fixes the naming of Bluetooth® Low Energy commands according to the AN5270 specification,
- Fixes the connection fail behavior of the OpenThread COM port,
- Fixes Bluetooth® Low Energy tester connection fail behavior on Linux®,
- Fixes OpenThread panId hexadecimal value display,
- Improve SBSFU OTA and tests,
- Fixes ACI client characteristic configuration after reconnection.
STM32CubeMonitor-RF V2.7.1
Ezaugarri/hobekuntza berriak
Sniffer fixes.
Arazoak konponduta
Argitalpen hau:
Fixes the error on quick Wireshark sniffer stop then start.
Removes two extra bytes in sniffed data.
STM32CubeMonitor-RF V2.8.0
Ezaugarri/hobekuntza berriak
OTA improvement:
- Adds an option in the OTA panel to increase the packet length (MTU) to optimize speed.
- Adds a menu to select the target. It is required to compute the number of sectors to erase for SMT32WB15xx.
- Removes the modulations not suitable for the PER test in the PER picklist.
Arazoak konponduta
Argitalpen hau:
- Fixes issue 102779: Displaying offset and attribute data length is reversed for ACI_GATT_ATTRIBUTE_MODIFIED_EVENT.
- Aligns the message HCI_ATT_EXCHANGE_MTU_RESP_EVENT with AN5270.
- Fixes the attribute name in HCI_LE_DATA_LENGTH_CHANGE_EVENT.
- Improves the welcome screen layout for small screens.
Arazoak konponduta
Argitalpen hau:
- Fixes issue 64425: Send command button unlocked during OTA transfer.
- Fixes issue 115533: During the OTA update, the issue in the
- ACI_GAP_START_GENERAL_DISCOVERY_PROC command.
- Fixes issue 115760:
- During OTA updates, when the Optimize MTU size check box is ticked, the download stops after the MTU size exchange.
- Fixes issue 117927: change address type to public device address for OTA.
- Fixes issue 118377: wrong sector size erased before OTA transfer.
- Set OTA block size according to MTU size exchange.
Ezaugarri/hobekuntza berriak
- Adds compatibility with the OpenThread stack of STM32Cube_FW_V1.14.0. This stack is based on the OpenThread 1.2 stack and supports the O.T. 1.1 commands.
- Adds new Bluetooth® Low Energy commands and events. Updates some existing commands to be compatible with the release 1.14.0 of the stack.
Commands added:
-
- HCI_LE_READ_TRANSMIT_POWER,
- HCI_LE_SET_PRIVACY_MODE,
- ACI_GAP_ADD_DEVICES_TO_LIST,
- HCI_LE_READ_RF_PATH_COMPENSATION,
- HCI_LE_WRITE_RF_PATH_COMPENSATION
- Events added:
- HCI_LE_EXTENDED_ADVERTISING_REPORT_EVENT,
- HCI_LE_SCAN_TIMEOUT_EVENT,
- HCI_LE_ADVERTISING_SET_TERMINATED_EVENT,
- HCI_LE_SCAN_REQUEST_RECEIVED_EVENT,
- HCI_LE_CHANNEL_SELECTION_ALGORITHM_EVENT
- Command removed:
- ACI_GAP_START_NAME_DISCOVERY_PROC
- Command updated (parameters or description):
- ACI_HAL_GET_LINK_STATUS,
- HCI_SET_CONTROLLER_TO_HOST_FLOW_CONTROL,
- HCI_HOST_BUFFER_SIZE,
- ACI_HAL_WRITE_CONFIG_DATA,
- ACI_GAP_SET_LIMITED_DISCOVERABLE,
- ACI_GAP_SET_DISCOVERABLE,
- ACI_GAP_SET_DIRECT_CONNECTABLE,
- ACI_GAP_INIT,
- ACI_GAP_START_GENERAL_CONNECTION_ESTABLISH_PROC,
- ACI_GAP_START_SELECTIVE_CONNECTION_ESTABLISH_PROC,
- ACI_GAP_CREATE_CONNECTION,
- ACI_GAP_SET_BROADCAST_MODE,
- ACI_GAP_START_OBSERVATION_PROC,
- ACI_GAP_GET_OOB_DATA,
- ACI_GAP_SET_OOB_DATA,
- ACI_GAP_ADD_DEVICES_TO_RESOLVING_LIST,
- ACI_HAL_FW_ERROR_EVENT,
- HCI_LE_READ_ADVERTISING_PHYSICAL_CHANNEL_TX_POWER,
- HCI_LE_ENABLE_ENCRYPTION,
- HCI_LE_LONG_TERM_KEY_REQUEST_NEGATIVE_REPLY,
- HCI_LE_RECEIVER_TEST_V2,
- HCI_LE_TRANSMITTER_TEST_V2,
- ACI_HAL_WRITE_CONFIG_DATA,
- ACI_GAP_SET_DIRECT_CONNECTABLE,
- HCI_LE_SET_EVENT_MASK,
- HCI_LE_TRANSMITTER_TEST
802.15.4 sniffer firmwarea eguneratzen du STM32WB55 Nucleorako eta firmware berria STM32WB55 USB donglerako.
Arazoak konponduta
Argitalpen hau:
- Fixes issue 130999: Some packets are missed in the PER test.
- Fixes issue 110073: Some panId values cannot be set in the Network Explorer tab.
STM32CubeMonitor-RF V2.9.1
Ezaugarri/hobekuntza berriak
- Updates 802.15.4 sniffer firmware software.
- Fixes some issues reported on version 2.9.0.
- Fixes issue 131905: The Bluetooth® Low Energy TX LE PHY menu is not visible in RF tests.
- Fixes issue 131913: The tools do not identify some Bluetooth® Low Energy versions.
Murrizketak
STM32CubeMonitor-RF bertsio honek ez ditu publizitate komando zabalduak eskaintzen. Eragiketa batzuetarako (FUOTA, ACI eskaneatzea), Bluetooth® Energia Baxuko pila erabili behar da publizitate zaharkituarekin. Ikusi UM2288 erabiltzailearen eskuliburua zein firmware erabili behar den ikusteko.
STM32CubeMonitor-RF V2.10.0
Ezaugarri/hobekuntza berriak
- Alignment with STM32CubeWB firmware 1.15.0
- OpenThread 1.3 support
- Bluetooth® Low Energy extended advertising support
- Bluetooth® Low Energy commands alignment with AN5270 Rev. 16
- New Bluetooth® Low Energy RSSI acquisition method
Arazoak konponduta
Argitalpen hau:
- Fixes issue 133389: A command with variable length crashes the tool.
- Fixes issue 133695: Bluetooth® Low Energy missing
- HCI_LE_TRANSMITTER_TEST_V2 PHY input parameter.
- Fixes issue 134379: RF transmitter test, payload size is limited to 0x25.
- Fixes issue 134013: Wrong text seen after launching and stopping tests by checking the Get RSSI box.
STM32CubeMonitor-RF V2.11.0
Ezaugarri/hobekuntza berriak
- Support of STM32WBAxx devices except for OTA firmware update
- Continuous wave mode in the 802.15.4 transmitter test (STM32CubeWB firmware 1.11.0 and later)
- Availability to save Bluetooth® Low Energy ACI log information in a csv formatted file
- Alignment with STM32CubeWB firmware 1.16.0
- Alignment with STM32CubeWBA firmware 1.0.0
- Update of 802.15.4 sniffer firmware
- Removal of 802.15.4 RX_Start command before RX_get and Rs_get_CCA
Arazoak konponduta
Argitalpen hau:
- Fixes issue 139468: Advertising test generates all advertising channels without being selected
- Fixes issue 142721: Event with the length of the next param on more than 1 byte is not managed
- Fixes issue 142814: Unable to set some command parameters with variable length
- Fixes issue 141445: VS_HCI_C1_WRITE_REGISTER – ERROR found in script results
- Fixes issue 143362: The tool gets blocked when setting the variable param length to 0
Murrizketak
- 139237 arazo berria: ACI panelean, eskaneatu aurretik publizitatea hasten denean, tresnak ez ditu behar bezala kudeatzen publizitatearen ikonoa eta egoera.
- Arazo berria ACI Utilities panelean: ezinezkoa da eskaneatzea abiaraztea publizitatea hasita badago. Publizitatea gelditu behar da aurretik.
STM32CubeMonitor-RF V2.12.0
Ezaugarri/hobekuntza berriak
- Alignment with STM32CubeWB firmware 1.17.0
- Alignment with STM32CubeWBA firmware 1.1.0
- Fix advertising issues using GAP commands instead of legacy
- Add STM32WBA OTA firmware update support
- Fix 802.15.4 sniffer issues around the Python™ script
- Upgrade Java® runtime version from 8 to 17
- Update missing Bluetooth® Low Energy parameters values and description
Arazoak konponduta
Argitalpen hau:
- Fixes issues 149148 and 149147: 802.15.4 sniffer leading into negative timestamps on Wireshark
- Fixes issue 150852: Bluetooth® Low Energy OTA profile application could not be discovered on STM32WBAxx
- Fixes issue 150870: Missing parameters description in HTML wireless interface
- Fixes issue 147338: Gatt_Evt_Mask parameter must be a bit mask
- Fixes issue 147386: Missing ACI command to control antenna switching mechanism for AoA/AoD
- Fixes issue 139237: Improve the advertising mechanism
STM32CubeMonitor-RF V2.13.0
Ezaugarri/hobekuntza berriak
- Alignment with STM32CubeWB firmware 1.18.0
- Alignment with STM32CubeWBA firmware 1.2.0
- Add 802.15.4 support for STM32WBAxx devices
- Add OpenThread support for STM32WBAxx devices
Arazoak konponduta
Argitalpen hau:
- Fixes issue 161417: Combo Box not displayed on 802.15.4 Start TX
- Fixes issue 159767: Replace the Twitter bird logo with the X logo
- Fixes issue 152865: Transfer of firmware via OTA from WB55 device connected to STM32CubeMonitor-RF to device type WBA5x not active
- Fixes issue 156240: Missing interval of parameter’s possible values in tool description
- Fixes issue 95745 [802.15.4 RF]: No information displayed about the device ID connected
- Fixes issue 164784: Error using online beacon with a random address
- Fixes issues 163644 and 166039: Error using advertising with a random or public not connectable device address
- Fixes issue 69229: Scanning cannot stop when advertising is running.
STM32CubeMonitor-RF V2.14.0
Ezaugarri/hobekuntza berriak
- Alignment with STM32CubeWB firmware 1.19.0
- Alignment with STM32CubeWBA firmware 1.3.0
- Upgrade supported OpenThread version to 1.3.0 API 340
Arazoak konponduta
Argitalpen hau:
- Fixes issues 165981 and 172847 to stabilize Linux® and macOS®, 802.15.4 sniffer behavior
- Fixes issues 165552 and 166762 to improve scan and advertising features
- Fixes issue 172471 to extend STM32WBA 802.15.4 power range
STM32CubeMonitor-RF V2.15.0
Ezaugarri/hobekuntza berriak
- Alignment with STM32CubeWB firmware 1.20.0
- Alignment with STM32CubeWBA firmware 1.4.0
- Add support of STM32CubeWB0 firmware 1.0.0
- Upgrade Java® runtime version from 17.0.2 to 17.0.10
Arazoak konponduta
- Argitalpen hau:
- Fixes issue 174238 – 802.15.4 sniffer malformed packet in Wireshark
STM32CubeMonitor-RF V2.15.1
Ezaugarri/hobekuntza berriak
Add support of STM32WB05N firmware 1.5.1
Arazoak konponduta
Argitalpen hau:
- Fixes issue 185689: The first value of power in the ACI Utilities panel is not displayed for STM32WB or STM32WBA
- Fixes issue 185753: Add STM32WB06 in STM32CubeMonitor-RF
Ezaugarri/hobekuntza berriak
- Alignment with STM32CubeWB firmware 1.21.0
- Alignment with STM32CubeWBA firmware 1.5.0
- Alignment with STM32CubeWB0 firmware 1.1.0
- Upgrade supported OpenThread stack to API 420 version 1.3.0
- Update 802.15.4 sniffer firmware
- Add STM32WB0X FUOTA support
- Improve path management
Arazoak konponduta
Argitalpen hau:
- Fixes issue 193557 – Vulnerability of commons-io
- Fixes issue 190807 – FUOTA image base address management
- Fixes issue 188490 – WBA PER test change to get RSSI
- Fixes issue 191135 – Cannot connect to STM32WB15
- Fixes issue 190091 – Connection to WB05N does not work the first time
- Fixes issue 190126 – OpenThread, device information menu disabled
- Fixes issue 188719 – Error in baud rate value
3.23 STM32CubeMonitor-RF V2.17.0
3.23.1 New features/enhancements - Alignment with STM32CubeWB firmware 1.22.0
- Alignment with STM32CubeWBA firmware 1.6.0
- Alignment with STM32CubeWB0 firmware 1.2.0
- Support of STM32WBA6x devices
Arazoak konponduta
Argitalpen hau:
- Fixes issue 185894 – Support STM32WB1x BLE_Stack_light_fw upgrade
- Fixes issue 195370 – ACI_GAP_SET_NON_DISCOVERABLE return Command disallowed error
- Fixes issue 196631 – Could not perform RF Tests on WB05X
Berrikuspen historia
2. taula. Dokumentuen berrikuspenaren historia
| Data | Berrikuspena | Aldaketak |
| 02-mar-2017 | 1 | Hasierako kaleratzea. |
| 25-apirilak-2017 | 2 | Modified for release 1.2.0:– updated Section 2: Release information– updated Section 2.3: Restrictions– added Section 3.2: STM32CubeMonitor-RF V1.2.0 information |
| 27-eka-2017 | 3 | Changed document classification to ST Restricted.Modified for release 1.3.0, hence updated document title and addedSection 3.3: STM32CubeMonitor-RF V1.3.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3: Setup procedure, Gailuaren konfigurazioa, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions eta Section 3.2: STM32CubeMonitor-RF V1.2.0 information. |
| 29-2017-XNUMX | 4 | 1.4.0 bertsiorako aldatua, beraz, dokumentuaren izenburua eguneratua eta gehituaSection 3.4: STM32CubeMonitor-RF V1.4.0 information.Updated 1.1. atala: Gaindituview, Section 1.2: Host PC system requirements, Section 1.3.1: Windows, Section 1.4: Devices supported by STM32CubeMonitor-RF, Section 2.1: New features/enhancements, Section 2.2: Fixed issues eta Section 2.3: Restrictions.Added Section 1.3.2: Linux®, Section 1.3.3: macOS®, eta Section 2.4: Licensing.Updated Table 1: STM32CubeMonitor-RF 1.4.0 release summary. |
| 29-Urt-2018 | 5 | 1.5.0 bertsiorako aldatua, beraz, dokumentuaren izenburua eguneratua eta gehituaSection 3.5: STM32CubeMonitor-RF V1.5.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3.2: Linux®, Gailuaren konfigurazioa, Section 2.1: New features/enhancements, Section 2.2: Fixed issues eta Section 2.3: Restrictions.Updated Table 1: STM32CubeMonitor-RF 1.5.0 release summary etaTable 2: List of licenses. |
| 14-maiatzak-2018 | 6 | 2.1.0 bertsiorako aldatua, beraz, dokumentuaren izenburua eguneratua eta gehituaSection 3.6: STM32CubeMonitor-RF V2.1.0 information.Updated 1.1. atala: Gaindituview, Section 1.2: Host PC system requirements, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions.Eguneratua Table 1: STM32CubeMonitor-RF 2.1.0 release summary etaTable 2: List of licenses. |
| Abuztuak 24-2018 | 7 | 2.2.0 bertsiorako aldatua, beraz, dokumentuaren izenburua eguneratua eta gehituaSection 3.7: STM32CubeMonitor-RF V2.2.0 information.Updated Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.2: Restrictions.Updated Table 1: STM32CubeMonitor-RF 2.3.0 release summary etaTable 2: List of licenses. |
| Data | Berrikuspena | Aldaketak |
| 15-2018-XNUMX | 8 | 2.2.1 bertsiorako aldatua, beraz, dokumentuaren izenburua eguneratua eta gehituaSection 3.8: STM32CubeMonitor-RF V2.2.1 information.Updated 1.1. atala: Gaindituview, Section 1.3.2: Linux®, Section 1.3.3: macOS®, Section 2.1: New features/enhancements, eta Section 2.2: Restrictions.Removed former Section 2.2: Fixed issues. |
| Otsailak 15-2019 | 9 | Updated:– Title, 1. taula, eta 2. atala switch to the 2.3.0 release– 3. atala former releases history– 1.1. atala: Gaindituview to add OpenThread and 802.15.4 RF– Section 1.3: Setup procedure with different OS |
| 12-2019-XNUMX | 10 | Updated:– Title, 1. taula, eta 2. atala switch to the 2.4.0 release– 2. taula jSerialComm version– 3. atala former releases history |
| 03-apirilak-2020 | 11 | Updated:– Title, 1. taula, eta 2. atala switch to the 2.5.0 release– 2. taula Inno setup version– 3. atala former releases history |
| Azaroak 13-2020 | 12 | Updated:– Title, 1. taula, eta 2. atala switch to the 2.6.0 release– 2. taula eta 3. taula details in an added copyright column– 3. atala former releases history |
| Otsailak 08-2021 | 13 | Updated:– Title, 1. taula, 1. atala, eta 2. atala switch to the 2.7.0 release with new802.15.4 sniffer mode and Ostalari PC sistemaren eskakizunak– 3. taula Java SE and Java FX version– 3. atala former releases history |
| 08-eka-2021 | 14 | Updated:– Title, 1. taula, eta 2. atala switch to the 2.7.1 release with 802.15.4 sniffer fixes– 3. atala former releases history |
| 15-2021-XNUMX | 15 | Updated:– Title, 1. taula, eta 2. atala switch to the 2.8.0 release with OTA speed improvement and new OTA option for STM32WB15xx– 1.4. atala NUCLEO-WB15CC support and test firmware explanation– 2. taula with SLA0048 in Lizentzia ematea– 3. taula with Inno setup version– 3. atala former releases history |
| Abenduak 21-2021 | 16 | Updated:– Title, 1. taula, eta 2.1. atala switch to the 2.8.1 release with fixes for Bluetooth® Low Energy OTA– 3. atala former releases history |
| Data | Berrikuspena | Aldaketak |
| 07-2022-XNUMX | 17 | Eguneratua:
|
| 14-2022-XNUMX | 18 | Eguneratua:
|
| Azaroak 29-2022 | 19 | Eguneratua:
|
| 03-mar-2023 | 20 | Eguneratua:
|
| 4-2023-XNUMX | 21 | Eguneratua:
Izenburua, 1. taula, eta 2. atala switch to the 2.12.0 release |
| Azaroak 23-2023 | 22 | Eguneratua:
Izenburua, 1. taula, eta 2. atala switch to the 2.13.0 release 3. atala former releases history |
| 14-mar-2024 | 23 | Eguneratua:
|
| 01-2024-XNUMX | 24 | Eguneratua:
|
| 12-2024-XNUMX | 25 | Eguneratua: Izenburua, 1. taula, eta 2 atala. barne Murrizketak, switch to the 2.15.1 release3. atala former releases history |
| Azaroak 22-2024 | 26 | Eguneratua:
|
| Data | Berrikuspena | Aldaketak |
| Otsailak 18-2025 | 27 | Eguneratua: Izenburua, 1. taula, Section 1.4, Section 2.1, Section 2, barne Murrizketak, switch to the 2.17.0 release 3. atala former releases history |
| 23-eka-2025 | 28 | Eguneratua:
Izenburua, Taula 1, atala 2, barne Murrizketak, switch to the 2.18.0 release 3. atala former releases history |
OHAR GARRANTZITSUA - IRAKURRI ARRETA
- STMicroelectronics NV eta bere filialek ("ST") eskubidea dute aldaketak, zuzenketak, hobekuntzak, aldaketak eta hobekuntzak egiteko ST produktuetan eta/edo dokumentu honetan edozein unetan jakinarazi gabe. Erosleek eskaerak egin aurretik ST produktuei buruzko azken informazio garrantzitsua eskuratu behar dute. ST produktuak eskaera onartzeko unean indarrean dauden STren salmenta-baldintzen arabera saltzen dira.
- Erosleak dira ST produktuen aukeraketa, aukeraketa eta erabileraren erantzule bakarrak eta STek ez du bere gain hartzen aplikazioen laguntzaren edo erosleen produktuen diseinuaren erantzukizunik.
- STek ez du baimenik, espresuki edo inplizituki, jabetza intelektualeko eskubiderik ematen.
- ST produktuen birsalmentak hemen azaltzen den informazioaz bestelako xedapenak dituztenak baliogabetuko ditu STek produktu horrengatik emandako edozein berme.
- ST eta ST logotipoa ST-ren marka komertzialak dira. ST markei buruzko informazio gehiago lortzeko, jo www.st.com/trademarks Produktu edo zerbitzuen izen guztiak dagozkien jabeen jabetzakoak dira.
- Dokumentu honetako informazioak dokumentu honen aurreko edozein bertsiotan emandako informazioa ordezkatzen eta ordezkatzen du.
- © 2025 STMicroelectronics - Eskubide guztiak erreserbatuta
Dokumentuak / Baliabideak
 |
STMicroelectronics RN0104 STM32 Kubo Monitore RF [pdfErabiltzailearen gida RN0104 STM32 Kubo Monitore RF, RN0104, STM32 Kubo Monitore RF, Kubo Monitore RF, Monitore RF |