ọdịnaya zoo
1 STMicroelectronics RN0104 STM32 Cube Monitor RF
2 Okwu mmalite
3 Nkwado ndị ahịa
4 ozi izugbe
5 Ozi wepụta
6 Akụkọ ngbanwe
7 Akwụkwọ / akụrụngwa
7.1 Ntụaka

ST-Microelectronics-Logo

STMicroelectronics RN0104 STM32 Cube Monitor RF

STMicroelectronics-RN0104-STM32-Cube-Monitor-RF-Product-Image

Okwu mmalite

A na-emelite ndetu ntọhapụ a kwa oge ka ọ na-agbaso STM32CubeMonRF (nke a na-akpọ STM32CubeMonitor-RF) evolushọn, nsogbu na oke.
Lelee nkwado STMicroelectronics websaịtị na www.st.com for the newest version. For the latest release summary, refer to Table 1.

Isiokwu 1. STM32CubeMonRF 2.18.0 nchịkọta mwepụta

Ụdị Nchịkọta
Ntọhapụ dị obere
  • Alignment with STM32CubeWB firmware 1.23.0
  • Alignment with STM32CubeWBA firmware 1.7.0
  •  Upgrade of Java® runtime version from 17.0.10 to 21.0.04
  • Upgrade of supported OpenThread version to 1.4.0 API 377
  • Support of command-line interface (CLI)
  • ndozi ahụhụ

Nkwado ndị ahịa

For more information or help concerning STM32CubeMonitor-RF, contact the nearest STMicroelectronics sales office or use the ST community at community.st.com. For a complete list of STMicroelectronics offices and distributors, refer to the www.st.com web ibe.

Mmelite ngwanrọ
Enwere ike ibudata mmelite ngwanrọ na akwụkwọ ọhụrụ niile site na nkwado STMicroelectronics web ibe na www.st.com/stm32cubemonrf

ozi izugbe

gafereview

STM32CubeMonitor-RF is a tool provided to help designers to:

  • Perform RF (radio frequency) tests of Bluetooth® LE applications
  • Perform RF (radio frequency) tests of 802.15.4 applications
  • Send commands to Bluetooth® LE parts to perform tests
  • Configure Bluetooth® LE beacons and manage file over-the-air (OTA) transfers
  • Discover Bluetooth® LE device profiles ma soro ọrụ na-akpakọrịta
  • Send commands to OpenThread parts to perform tests
  • Visualize Thread device connections
  • Sniff 802.15.4 network

Akụrụngwa a na-emetụta microcontrollers nke usoro STM32WB, STM32WB0, na STM32WBA, dabere na cores Arm®(a).

Host PC usoro chọrọ
Sistemụ arụ ọrụ na ụlọ ọrụ akwadoro

  • Windows®(b) 10 and 11, 64-bit (x64)
  • Linux®(c) Ubuntu®(d) LTS 22.04 and LTS 24.04
  • macOS®(e) 14 (Sonoma), macOS®(e) 15 (Sequoia)

Ngwa ngwa chọrọ
For Linux®, the Java®(f) runtime environment (JRE™) is required for the installer. For 802.15.4 sniffer only:

  • Wireshark v2.4.6 or later is available from https://www.wireshark.org
  • Python™ card v3.8 or later is available from https://www.python.org/downloads
  • pySerial v3.4 or later, available from https://pypi.org/project/pyserial
  • Arm bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Arm Limited (ma ọ bụ ndị enyemaka ya) na US na/ma ọ bụ ebe ọzọ.
  • Windows bụ ụghalaahịa nke otu ụlọ ọrụ Microsoft.
  • Linux® bụ ụghalaahia edenyere nke Linus Torvalds.
  • Ubuntu® is a registered trademark of Canonical Ltd.
  • macOS® bụ ụghalaahịa nke Apple Inc., edebanye aha na US na obodo na mpaghara ndị ọzọ.
  • Oracle na Java bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Oracle na/ma ọ bụ ndị mmekọ ya.

Usoro nhazi

Windows®

Wụnye
If an older version of STM32CubeMonitor-RF is already installed, the existing version must be uninstalled before installing the new one. The user must have administrator rights on the computer to run the installation.

  1. Budata STM32CMonRFWin.zip.
  2. Wepụ ihe a file ruo nwa oge.
  3. Launch STM32CubeMonitor-RF.exe to be guided through the setup process.

Wepu ya
To uninstall STM32CubeMonitor-RF, follow the steps below:

  1. Open the Windows Control panel.
  2. Select Programs and Features to display the list of programs installed on the computer.
  3. Left-click on STM32CubeMonitor-RF from the STMicroelectronics publisher and select the Uninstall function.

Linux bụ otu n'ime ngwa ngwa ngwa ngwa ngwa ngwa ngwa ngwa

Ngwa ngwa chọrọ
A choro gburugburu oge ojiri oge Java maka onye nrụnye Linux®. Enwere ike itinye ya na iwu apt-get install default-jdk ma ọ bụ njikwa ngwugwu.

Wụnye

  1. Budata STM32CMonRFLin.tar.gz.
  2. Wepụ ihe a file ruo nwa oge.
  3. Make sure you have access rights to the target installation directory.
  4. Launch the execution of the SetupSTM32CubeMonitor-RF.jar file, or launch manually the installation with java -jar <install path>/SetupSTM32CubeMonitor-RF.jar.
  5. An icon appears on the desktop. If the icon is not executable, edit its properties and select the option Allow executing file dị ka mmemme, ma ọ bụ site na Ubuntu® 19.10 gaa n'ihu, wee họrọ nhọrọ Hapụ ịmalite.

Ozi gbasara ọdụ ụgbọ mmiri COM na Ubuntu®
The modemmanager process checks the COM port when the board is plugged in. Due to this activity, the COM port is busy for a few seconds, and STM32CubeMonitor-RF cannot connect.
The users need to wait for the end of the modemmanager activity before opening the COM port. If the user does not require the modemmanager, it is possible to uninstall it with the command sudo apt-get purge modemmanager.
For the sniffer mode, the modem manager must be uninstalled or disabled through the command sudo systemctl stop ModemManager.service before connecting the sniffer device.
If the modem manager cannot be disabled, it is also possible to define rules so that the modem manager ignores the sniffer device. The 10-stsniffer.rules file, available in the ~/STMicroelectronics/STM32CubeMonitor-RF/sniffer directory can be copied in /etc/udev/rules.d.

Wepu ya  

  1. Launch the uninstaller.jar located in the installation directory /STMicroelectronics/STM32CubeMonitor-RF/Uninstaller. If the icon is not executable, edit its properties and select the option Allow executing file dị ka mmemme.
  2. Select Force deletion… and click on the Uninstall button.

macOS 

Wụnye

  1. Budata STM32CMonRFMac.zip.
  2. Wepụ ihe a file ruo nwa oge.
  3. Make sure you have access rights to the target installation directory.
  4. Double-click on the installer STM32CubeMonitor-RF.dmg file.
  5. Open the STM32CubeMonitor-RF new disk.
  6. Drag and drop the STM32CubeMonitor-RF shortcut to the Applications shortcut.
  7. Drag and drop the document folder to a location of your choice.

If an error with STM32CubeMonitor-RF an not be opened because it is from an unidentified developer occurs, the command sudo spctl –master-disable must be used to disable the verification.

Wepu ya

  1. In the applications folder, select the STM32CubeMonitor-RF icon and move it to trash.
  2. In the user’s home directory, remove the folder Library/STM32CubeMonitor-RF.

If the Library folder is hidden:

  • Mepee Finder.
  • Hold down Alt (Option) and choose Go from the drop-down menu bar at the top of the screen.
  • The Library folder is listed below the Home folder.

Ngwa ndị STM32CubeMonitor-RF kwadoro

Ngwaọrụ akwadoro
A na-anwale ngwá ọrụ ahụ na STM32WB55 Nucleo na dongle mbadamba (P-NUCLEO-WB55), STM32WB15 Nucleo board (NUCLEO-WB15CC), STM32WB5MM-DK Discovery kit, STM32WBA5x Nucleo osisi, na STM32WBA6x Nucleo osisi, na STM32WB0 Nucleo osisi, na STMXNUMXWBXNUMX Nucleo osisi, na STMXNUMXWBXNUMX Nucleo Board Nucleo osisi.

The boards based on STM32WBxx are compatible if they feature:

  • A connection through a USB Virtual COM port or a serial link and
  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Thread_Cli_Cmd for Thread
    • Phy_802_15_4_Cli for 802.15.4 RF test
    • Mac_802_15_4_Sniffer.bin for sniffer

The boards based on STM32WBAxx are compatible if they feature: • A connection through a serial link and

  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Thread_Cli_Cmd for Thread
    • Phy_802_15_4_Cli for 802.15.4 RF test
      The boards based on STM32WB0x are compatible if they feature:
  • A connection through a serial link and
  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • A kọwapụtara nkọwa njikọ ngwaọrụ na ọnọdụ firmware na ngalaba 2 nke ngwa ngwa ngwa STM32CubeMonitor-RF maka nha arụmọrụ ikuku (UM2288).

Ozi wepụta

Atụmatụ/ nkwalite ọhụrụ

  • Alignment with STM32CubeWB firmware 1.23.0
  • Alignment with STM32CubeWBA firmware 1.7.0
  • Upgrade of Java® runtime version from 17.0.10 to 21.0.04
  • Upgrade of supported OpenThread version to 1.4.0 API 377
  • Support of command-line interface (CLI)

Okwu edoziziri

Ntọhapụ a:

  • Fixes issue 64748 – Add a dialog to select the beacon file
  • Fixes issue 202582 – [802.15.4 Sniffer] Incorrect RSS report value
  • Fixes issue 204195 – Some ACI/HCI commands do not send 16-bit UUID parameter
  • Fixes issue 204302 – VS_HCI_C1_DEVICE_INFORMATION DBGMCU_ICODE typo – DBGMCU_ICODER for STM32WBA
  • Fixes issue 204560 – [STM32WB0] Transmission packet count is abnormal on PER test

Mmachibido

  • When the device under test is disconnected, the software might not immediately detect the disconnection. In this case, an error is reported when a new command is sent. If the board is not detected after the error, it is necessary to unplug it and then reconnect it.
  • For sniffer on macOS®, the sniffer Python™ file a ga-edobe ya na executable ozugbo oyiri. Iwu a bụ chmod+x stm32cubeMonRf_sniffer.py.
  • A naghị akwado ụdị firmware STM32WB tupu 1.16, achọrọ ụdị ọhụrụ ọzọ.
  • N'oge ule STM32WB0x Bluetooth® LE RF na ule STM32WBAxx RX, enyeghị ụkpụrụ nha RSSI.
  • Ogwe Beacon na ACI anaghị arụ ọrụ maka STM32WB05N.
  • Maka ma STM32WBxx na STM32WBAx, na Bluetooth® LE RX na PER ule, PHY uru 0x04 ka atụpụtara mana onye nnata anaghị akwado ya. Nke a na-eduga na enweghị ngwugwu ọnwetara.

Inye ikike
A na-ebunye STM32CubeMonRF n'okpuru nkwekọrịta ikike ngwanrọ SLA0048 yana usoro ikike ya agbakwunyere.

Ozi mwepụta STM32CubeMonitor-RF

STM32CubeMonitor-RF V1.5.0
Tool first version to support Bluetooth® Low Energy features of STM32WB55xx.
Versions 1.x.y have only Bluetooth® Low Energy support.

STM32CubeMonitor-RF V2.1.0
Addition of OpenThread support in the tool

STM32CubeMonitor-RF V2.2.0

  • Improvement of OpenThread command windows: Option to clear windows/history, details about OT commands selected in the tree
  • Addition of read param and set param buttons for OT commands used to read or set parameters
  • Addition of scripts for OpenThread
  • It is possible to add a loop in the script (refer to the user manual for details)
  • User interface update: the disabled items are now colored in gray
  • Implementation of search command for threads
  • Addition of the selection of Bluetooth® Low Energy PHY and modulation index
  • In Bluetooth® Low Energy RF tests, the frequency can be changed when the test is running

STM32CubeMonitor-RF V2.2.1

Atụmatụ/ nkwalite ọhụrụ
The OTA download procedure is updated: When the target device configuration is in OTA loader mode, the target address is incremented by one. STM32CubeMonitor-RF now uses the incremented address for the download.
The list of OpenThread commands is aligned with the Thread® stack.

STM32CubeMonitor-RF V2.3.0

Atụmatụ/ nkwalite ọhụrụ

  • Alignment with STM32WB55 cube firmware 1.0.0
  • Addition of 802.15.4 RF tests
  • New features in the ACI Utilities panel:
  • The discovery of remote Bluetooth® Low Energy devices
  • Interaction with the services of remote devices

STM32CubeMonitor-RF V2.4.0

Atụmatụ/ nkwalite ọhụrụ

  • Alignment with STM32WB cube firmware 1.1.1
  • Support the over-the-air firmware update of the wireless stack (FUOTA).
  • Optimize FUOTA connection parameters to increase performance. Adds a warning if the address is below 0x6000.
  • Correction of UART detection issue on Windows® 10
  • The tool properly uses the write without response function to write a characteristic with write without response permission.
  • Update the device name in the device information box.
  • Fix the value of HCI_LE_SET_EVENT_MASK.
  • Correction of the text about the error reason description
  • Fix issues with OpenThread scripts.
  • Set a maximum size for graphs.
  • Update some control locks to prevent wrong actions from the user.

STM32CubeMonitor-RF V2.5.0

Atụmatụ/ nkwalite ọhụrụ

  • Network Explorer is added to a new tab of Thread® mode.
  • This feature displays the connected Thread® devices and the connections between them.

STM32CubeMonitor–RF V2.6.0

Atụmatụ/ nkwalite ọhụrụ

RF tests are added.
In the transmitter test, the sending of MAC frames is available. The user defines the frame.
In the receiver test, the LQI, ED, and CCA tests are available and the PER test shows the decoded frames.

Okwu edoziziri

Ntọhapụ a: 

  • Updates the C1_Read_Device_Information command description,
  • Disables the navigation link when the 802.15.4 receiver test is in progress,
  • Updates ST logo and colors,
  • Fixes the blank popup message displayed when the script detects an error,
  • Disables the start button as soon as the channel list is inconsistent in the 802.15.4 PER multichannel test,
  • And includes a workaround to prevent freeze observed on a serial port with macOS®.

STM32CubeMonitor-RF V2.7.0

Atụmatụ/ nkwalite ọhụrụ
Na-emelite OpenThread API na ụdị 1.1.0. Na-agbakwunye API nchekwa OpenThread CoAP. Na-agbakwunye ọnọdụ sniffer 802.15.4.

Okwu edoziziri

Ntọhapụ a:

  • Fixes the address bytes inverted in the OTA updater panel,
  • Fixes the OpenThread network explore button label management,
  • Fixes the behavior of the parameter field when the parameter is from the terminal and is wrong,
  • Fixes the naming of Bluetooth® Low Energy commands according to the AN5270 specification,
  • Fixes the connection fail behavior of the OpenThread COM port,
  • Fixes Bluetooth® Low Energy tester connection fail behavior on Linux®,
  • Fixes OpenThread panId hexadecimal value display,
  • Improve SBSFU OTA and tests,
  • Fixes ACI client characteristic configuration after reconnection.

STM32CubeMonitor-RF V2.7.1

Atụmatụ/ nkwalite ọhụrụ

Sniffer fixes.

Okwu edoziziri

Ntọhapụ a:
Fixes the error on quick Wireshark sniffer stop then start.
Removes two extra bytes in sniffed data.

STM32CubeMonitor-RF V2.8.0

Atụmatụ/ nkwalite ọhụrụ

OTA improvement:

  • Adds an option in the OTA panel to increase the packet length (MTU) to optimize speed.
  • Adds a menu to select the target. It is required to compute the number of sectors to erase for SMT32WB15xx.
  • Removes the modulations not suitable for the PER test in the PER picklist.

Okwu edoziziri

Ntọhapụ a:

  • Fixes issue 102779: Displaying offset and attribute data length is reversed for ACI_GATT_ATTRIBUTE_MODIFIED_EVENT.
  • Aligns the message HCI_ATT_EXCHANGE_MTU_RESP_EVENT with AN5270.
  • Fixes the attribute name in HCI_LE_DATA_LENGTH_CHANGE_EVENT.
  • Improves the welcome screen layout for small screens.

Okwu edoziziri

Ntọhapụ a:

  • Fixes issue 64425: Send command button unlocked during OTA transfer.
  • Fixes issue 115533: During the OTA update, the issue in the
  • ACI_GAP_START_GENERAL_DISCOVERY_PROC command.
  • Fixes issue 115760:
  • During OTA updates, when the Optimize MTU size check box is ticked, the download stops after the MTU size exchange.
  • Fixes issue 117927: change address type to public device address for OTA.
  • Fixes issue 118377: wrong sector size erased before OTA transfer.
  • Set OTA block size according to MTU size exchange.

Atụmatụ/ nkwalite ọhụrụ

  • Adds compatibility with the OpenThread stack of STM32Cube_FW_V1.14.0. This stack is based on the OpenThread 1.2 stack and supports the O.T. 1.1 commands.
  • Adds new Bluetooth® Low Energy commands and events. Updates some existing commands to be compatible with the release 1.14.0 of the stack.

Commands added:

    • HCI_LE_READ_TRANSMIT_POWER,
    • HCI_LE_SET_PRIVACY_MODE,
    • ACI_GAP_ADD_DEVICES_TO_LIST,
    • HCI_LE_READ_RF_PATH_COMPENSATION,
    • HCI_LE_WRITE_RF_PATH_COMPENSATION
  • Events added:
    • HCI_LE_EXTENDED_ADVERTISING_REPORT_EVENT,
    • HCI_LE_SCAN_TIMEOUT_EVENT,
    • HCI_LE_ADVERTISING_SET_TERMINATED_EVENT,
    • HCI_LE_SCAN_REQUEST_RECEIVED_EVENT,
    • HCI_LE_CHANNEL_SELECTION_ALGORITHM_EVENT
  • Command removed:
    • ACI_GAP_START_NAME_DISCOVERY_PROC
  • Command updated (parameters or description):
    • ACI_HAL_GET_LINK_STATUS,
    • HCI_SET_CONTROLLER_TO_HOST_FLOW_CONTROL,
    • HCI_HOST_BUFFER_SIZE,
    • ACI_HAL_WRITE_CONFIG_DATA,
    • ACI_GAP_SET_LIMITED_DISCOVERABLE,
    • ACI_GAP_SET_DISCOVERABLE,
    • ACI_GAP_SET_DIRECT_CONNECTABLE,
    • ACI_GAP_INIT,
    • ACI_GAP_START_GENERAL_CONNECTION_ESTABLISH_PROC,
    • ACI_GAP_START_SELECTIVE_CONNECTION_ESTABLISH_PROC,
    • ACI_GAP_CREATE_CONNECTION,
    • ACI_GAP_SET_BROADCAST_MODE,
    • ACI_GAP_START_OBSERVATION_PROC,
    • ACI_GAP_GET_OOB_DATA,
    • ACI_GAP_SET_OOB_DATA,
    • ACI_GAP_ADD_DEVICES_TO_RESOLVING_LIST,
    • ACI_HAL_FW_ERROR_EVENT,
    • HCI_LE_READ_ADVERTISING_PHYSICAL_CHANNEL_TX_POWER,
    • HCI_LE_ENABLE_ENCRYPTION,
    • HCI_LE_LONG_TERM_KEY_REQUEST_NEGATIVE_REPLY,
    • HCI_LE_RECEIVER_TEST_V2,
    • HCI_LE_TRANSMITTER_TEST_V2,
    • ACI_HAL_WRITE_CONFIG_DATA,
    • ACI_GAP_SET_DIRECT_CONNECTABLE,
    • HCI_LE_SET_EVENT_MASK,
    • HCI_LE_TRANSMITTER_TEST

Na-emelite 802.15.4 sniffer firmware maka STM32WB55 Nucleo na firmware ọhụrụ maka STM32WB55 USB dongle

Okwu edoziziri

Ntọhapụ a:

  • Fixes issue 130999: Some packets are missed in the PER test.
  • Fixes issue 110073: Some panId values cannot be set in the Network Explorer tab.

STM32CubeMonitor-RF V2.9.1

Atụmatụ/ nkwalite ọhụrụ

  • Updates 802.15.4 sniffer firmware software.
  • Fixes some issues reported on version 2.9.0.
  • Fixes issue 131905: The Bluetooth® Low Energy TX LE PHY menu is not visible in RF tests.
  • Fixes issue 131913: The tools do not identify some Bluetooth® Low Energy versions.

Mmachibido
Ụdị STM32CubeMonitor-RF a anaghị enye iwu mgbasa ozi agbatịkwuru. Maka ịrụ ọrụ ụfọdụ (FUOTA, ACI scan), a ga-ejirịrị ngwugwu Bluetooth® Low Energy nwere mgbasa ozi nketa. Rụtụ aka na ntuziaka onye ọrụ UM2288 ka ịhụ nke firmware ga-eji.

STM32CubeMonitor-RF V2.10.0

Atụmatụ/ nkwalite ọhụrụ

  • Alignment with STM32CubeWB firmware 1.15.0
  • OpenThread 1.3 support
  • Bluetooth® Low Energy extended advertising support
  • Bluetooth® Low Energy commands alignment with AN5270 Rev. 16
  • New Bluetooth® Low Energy RSSI acquisition method

Okwu edoziziri

Ntọhapụ a:

  • Fixes issue 133389: A command with variable length crashes the tool.
  • Fixes issue 133695: Bluetooth® Low Energy missing
  • HCI_LE_TRANSMITTER_TEST_V2 PHY input parameter.
  • Fixes issue 134379: RF transmitter test, payload size is limited to 0x25.
  • Fixes issue 134013: Wrong text seen after launching and stopping tests by checking the Get RSSI box.

STM32CubeMonitor-RF V2.11.0

Atụmatụ/ nkwalite ọhụrụ

  • Support of STM32WBAxx devices except for OTA firmware update
  • Continuous wave mode in the 802.15.4 transmitter test (STM32CubeWB firmware 1.11.0 and later)
  • Availability to save Bluetooth® Low Energy ACI log information in a csv formatted file
  • Alignment with STM32CubeWB firmware 1.16.0
  • Alignment with STM32CubeWBA firmware 1.0.0
  • Update of 802.15.4 sniffer firmware
  • Removal of 802.15.4 RX_Start command before RX_get and Rs_get_CCA

Okwu edoziziri
Ntọhapụ a:

  • Fixes issue 139468: Advertising test generates all advertising channels without being selected
  • Fixes issue 142721: Event with the length of the next param on more than 1 byte is not managed
  • Fixes issue 142814: Unable to set some command parameters with variable length
  • Fixes issue 141445: VS_HCI_C1_WRITE_REGISTER – ERROR found in script results
  • Fixes issue 143362: The tool gets blocked when setting the variable param length to 0

Mmachibido

  • mbipụta ọhụrụ 139237: Na panel ACI, mgbe mgbasa ozi na-amalite tupu emee nyocha, ngwá ọrụ anaghị ejikwa akara mgbasa ozi na steeti nke ọma.
  • Ihe ọhụrụ dị na ACI Utilities panel: Ọ gaghị ekwe omume ịmalite nyocha ma ọ bụrụ na mgbasa ozi amalitela. A ga-akwụsịrịrị mgbasa ozi.

STM32CubeMonitor-RF V2.12.0

Atụmatụ/ nkwalite ọhụrụ

  • Alignment with STM32CubeWB firmware 1.17.0
  • Alignment with STM32CubeWBA firmware 1.1.0
  • Fix advertising issues using GAP commands instead of legacy
  • Add STM32WBA OTA firmware update support
  • Fix 802.15.4 sniffer issues around the Python™ script
  • Upgrade Java® runtime version from 8 to 17
  • Update missing Bluetooth® Low Energy parameters values and description

Okwu edoziziri

Ntọhapụ a:

  • Fixes issues 149148 and 149147: 802.15.4 sniffer leading into negative timestamps on Wireshark
  • Fixes issue 150852: Bluetooth® Low Energy OTA profile application could not be discovered on STM32WBAxx
  • Fixes issue 150870: Missing parameters description in HTML wireless interface
  • Fixes issue 147338: Gatt_Evt_Mask parameter must be a bit mask
  • Fixes issue 147386: Missing ACI command to control antenna switching mechanism for AoA/AoD
  • Fixes issue 139237: Improve the advertising mechanism

STM32CubeMonitor-RF V2.13.0

Atụmatụ/ nkwalite ọhụrụ

  • Alignment with STM32CubeWB firmware 1.18.0
  • Alignment with STM32CubeWBA firmware 1.2.0
  • Add 802.15.4 support for STM32WBAxx devices
  • Add OpenThread support for STM32WBAxx devices

Okwu edoziziri

Ntọhapụ a:

  • Fixes issue 161417: Combo Box not displayed on 802.15.4 Start TX
  • Fixes issue 159767: Replace the Twitter bird logo with the X logo
  • Fixes issue 152865: Transfer of firmware via OTA from WB55 device connected to STM32CubeMonitor-RF to device type WBA5x not active
  • Fixes issue 156240: Missing interval of parameter’s possible values in tool description
  • Fixes issue 95745 [802.15.4 RF]: No information displayed about the device ID connected
  • Fixes issue 164784: Error using online beacon with a random address
  • Fixes issues 163644 and 166039: Error using advertising with a random or public not connectable device address
  • Fixes issue 69229: Scanning cannot stop when advertising is running.

STM32CubeMonitor-RF V2.14.0

Atụmatụ/ nkwalite ọhụrụ

  • Alignment with STM32CubeWB firmware 1.19.0
  • Alignment with STM32CubeWBA firmware 1.3.0
  • Upgrade supported OpenThread version to 1.3.0 API 340

Okwu edoziziri

Ntọhapụ a:

  • Fixes issues 165981 and 172847 to stabilize Linux® and macOS®, 802.15.4 sniffer behavior
  • Fixes issues 165552 and 166762 to improve scan and advertising features
  • Fixes issue 172471 to extend STM32WBA 802.15.4 power range

STM32CubeMonitor-RF V2.15.0

Atụmatụ/ nkwalite ọhụrụ

  • Alignment with STM32CubeWB firmware 1.20.0
  • Alignment with STM32CubeWBA firmware 1.4.0
  • Add support of STM32CubeWB0 firmware 1.0.0
  • Upgrade Java® runtime version from 17.0.2 to 17.0.10

Okwu edoziziri

  • Ntọhapụ a:
  • Fixes issue 174238 – 802.15.4 sniffer malformed packet in Wireshark

STM32CubeMonitor-RF V2.15.1

Atụmatụ/ nkwalite ọhụrụ
Add support of STM32WB05N firmware 1.5.1

Okwu edoziziri

Ntọhapụ a:

  • Fixes issue 185689: The first value of power in the ACI Utilities panel is not displayed for STM32WB or STM32WBA
  • Fixes issue 185753: Add STM32WB06 in STM32CubeMonitor-RF

Atụmatụ/ nkwalite ọhụrụ

  • Alignment with STM32CubeWB firmware 1.21.0
  • Alignment with STM32CubeWBA firmware 1.5.0
  • Alignment with STM32CubeWB0 firmware 1.1.0
  • Upgrade supported OpenThread stack to API 420 version 1.3.0
  • Update 802.15.4 sniffer firmware
  • Add STM32WB0X FUOTA support
  • Improve path management

Okwu edoziziri

Ntọhapụ a:

  • Fixes issue 193557 – Vulnerability of commons-io
  • Fixes issue 190807 – FUOTA image base address management
  • Fixes issue 188490 – WBA PER test change to get RSSI
  • Fixes issue 191135 – Cannot connect to STM32WB15
  • Fixes issue 190091 – Connection to WB05N does not work the first time
  • Fixes issue 190126 – OpenThread, device information menu disabled
  • Fixes issue 188719 – Error in baud rate value
    3.23 STM32CubeMonitor-RF V2.17.0
    3.23.1 New features/enhancements
  • Alignment with STM32CubeWB firmware 1.22.0
  • Alignment with STM32CubeWBA firmware 1.6.0
  • Alignment with STM32CubeWB0 firmware 1.2.0
  • Support of STM32WBA6x devices

Okwu edoziziri

Ntọhapụ a:

  • Fixes issue 185894 – Support STM32WB1x BLE_Stack_light_fw upgrade
  • Fixes issue 195370 – ACI_GAP_SET_NON_DISCOVERABLE return Command disallowed error
  • Fixes issue 196631 – Could not perform RF Tests on WB05X

Akụkọ ngbanwe

Tebụl 2. Akụkọ ndegharị akwụkwọ

Ụbọchị Ndozigharị Mgbanwe
02-Mar-2017 1 Ntọhapụ mbụ.
  25-Eprel-2017   2 Modified for release 1.2.0:–  updated Section 2: Release information–  updated Section 2.3: Restrictions–  added Section 3.2: STM32CubeMonitor-RF V1.2.0 information
   27-June-2017    3 Changed document classification to ST Restricted.Modified for release 1.3.0, hence updated document title and addedSection 3.3: STM32CubeMonitor-RF V1.3.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3: Setup procedure, Nhazi ngwaọrụ, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions na Section 3.2: STM32CubeMonitor-RF V1.2.0 information.
    29-Sep-2017     4 Emegharịrị maka ntọhapụ 1.4.0, yabụ emelitere aha akwụkwọ wee gbakwunye yaSection 3.4: STM32CubeMonitor-RF V1.4.0 information.Updated Nkeji 1.1: Ofeview, Section 1.2: Host PC system requirements, Section 1.3.1: Windows, Section 1.4: Devices supported by STM32CubeMonitor-RF, Section 2.1: New features/enhancements, Section 2.2: Fixed issues na Section 2.3: Restrictions.Added Section 1.3.2: Linux®, Section 1.3.3: macOS®, na Section 2.4: Licensing.Updated Table 1: STM32CubeMonitor-RF 1.4.0 release summary.
   29-Jen-2018    5 Emegharịrị maka ntọhapụ 1.5.0, yabụ emelitere aha akwụkwọ wee gbakwunye yaSection 3.5: STM32CubeMonitor-RF V1.5.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3.2: Linux®, Nhazi ngwaọrụ, Section 2.1: New features/enhancements, Section 2.2: Fixed issues na Section 2.3: Restrictions.Updated Table 1: STM32CubeMonitor-RF 1.5.0 release summary naTable 2: List of licenses.
   14- Mee-2018    6 Emegharịrị maka ntọhapụ 2.1.0, yabụ emelitere aha akwụkwọ wee gbakwunye yaSection 3.6: STM32CubeMonitor-RF V2.1.0 information.Updated Nkeji 1.1: Ofeview, Section 1.2: Host PC system requirements, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions.Emelitere Table 1: STM32CubeMonitor-RF 2.1.0 release summary naTable 2: List of licenses.
   24-Ọgọst-2018    7 Emegharịrị maka ntọhapụ 2.2.0, yabụ emelitere aha akwụkwọ wee gbakwunye yaSection 3.7: STM32CubeMonitor-RF V2.2.0 information.Updated Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.2: Restrictions.Updated Table 1: STM32CubeMonitor-RF 2.3.0 release summary naTable 2: List of licenses.
Ụbọchị Ndozigharị Mgbanwe
   15-Ọkt-2018    8 Emegharịrị maka ntọhapụ 2.2.1, yabụ emelitere aha akwụkwọ wee gbakwunye yaSection 3.8: STM32CubeMonitor-RF V2.2.1 information.Updated Nkeji 1.1: Ofeview, Section 1.3.2: Linux®, Section 1.3.3: macOS®, Section 2.1: New features/enhancements, na Section 2.2: Restrictions.Removed former Section 2.2: Fixed issues.
  15-February-2019   9 Updated:–  Title, Tebụl 1, na Nkeji 2 switch to the 2.3.0 release–  Nkeji 3 former releases history–  Nkeji 1.1: Ofeview to add OpenThread and 802.15.4 RF–  Section 1.3: Setup procedure with different OS
  12-Jul-2019   10 Updated:–  Title, Tebụl 1, na Nkeji 2 switch to the 2.4.0 release–  Tebụl 2 jSerialComm version–  Nkeji 3 former releases history
  03-Eprel-2020   11 Updated:–  Title, Tebụl 1, na Nkeji 2 switch to the 2.5.0 release–  Tebụl 2 Inno setup version–  Nkeji 3 former releases history
  13-Nọvemba-2020   12 Updated:–  Title, Tebụl 1, na Nkeji 2 switch to the 2.6.0 release–  Tebụl 2 na Tebụl 3 details in an added copyright column–  Nkeji 3 former releases history
  08-February-2021   13 Updated:–  Title, Tebụl 1, Nkeji 1, na Nkeji 2 switch to the 2.7.0 release with new802.15.4 sniffer mode and Host PC usoro chọrọ–  Tebụl 3 Java SE and Java FX version–  Nkeji 3 former releases history
  08-June-2021   14 Updated:–  Title, Tebụl 1, na Nkeji 2 switch to the 2.7.1 release with 802.15.4 sniffer fixes–  Nkeji 3 former releases history
    15-Jul-2021     15 Updated:–  Title, Tebụl 1, na Nkeji 2 switch to the 2.8.0 release with OTA speed improvement and new OTA option for STM32WB15xx–  Nkeji 1.4 NUCLEO-WB15CC support and test firmware explanation–  Tebụl 2 with SLA0048 in Inye ikike–  Tebụl 3 with Inno setup version–  Nkeji 3 former releases history
  21-Dec-2021   16 Updated:–  Title, Tebụl 1, na Nkeji 2.1 switch to the 2.8.1 release with fixes for Bluetooth® Low Energy OTA–  Nkeji 3 former releases history
Ụbọchị Ndozigharị Mgbanwe
07-Jul-2022 17 Emelitere:
  • Aha aha, Tebụl 1, na Nkeji 2.1 switch to the 2.9.0 release
  • Python™ card version in Ngwa ngwa chọrọ
  • Section 2.4: Licensing replacing tables with the suitable license agreement statement
  • Nkeji 3 former releases history
14-Sep-2022 18 Emelitere:
  • Aha aha, Tebụl 1, na Nkeji 2 switch to the 2.9.1 release
  • Java FX-GTK3 conflict moved from Mmachibido to Linux® Wụnye
  • Nkeji 3 former releases history
29-Nọvemba-2022 19 Emelitere:
  • Aha aha, Tebụl 1, na Nkeji 2 switch to the 2.10.0 release
  • Removed note on fixed GTK2 issue in Linux® Wụnye
  • Nkeji 3 former releases history
03-Mar-2023 20 Emelitere:
  • Aha aha, Tebụl 1, na Nkeji 2 switch to the 2.11.0 release
  • Nkeji 3 former releases history
4-Jul-2023 21 Emelitere:

Aha aha, Tebụl 1, na Nkeji 2 switch to the 2.12.0 release
Nkeji 3 former releases history
23-Nọvemba-2023 22 Emelitere:

Aha aha, Tebụl 1, na Nkeji 2 switch to the 2.13.0 release

Nkeji 3 former releases history
14-Mar-2024 23 Emelitere:
  • Aha aha, Tebụl 1, na Nkeji 2 switch to the 2.14.0 release
  • macOS® versions in Sistemụ arụ ọrụ na ụlọ ọrụ akwadoro
  • Nkeji 3 former releases history
01-Jul-2024 24 Emelitere:
  • Aha aha, Tebụl 1, na Nkeji 2 switch to the 2.15.0 release
  • Nucleo boards in Ngwa ndị STM32CubeMonitor-RF kwadoro
  • Nkeji 3 former releases history
12-Sep-2024 25 Emelitere:
Aha aha, Tebụl 1, na Nkebi 2, gụnyere Mmachibido, switch to the 2.15.1 releaseNkeji 3 former releases history
22-Nọvemba-2024 26 Emelitere:
  • Aha aha, Tebụl 1, na Nkebi 2, gụnyere Mmachibido, switch to the 2.16.0 release
  • Linux® and macOS® versions in Sistemụ arụ ọrụ na ụlọ ọrụ akwadoro
  • Nkeji 3 former releases history
Ụbọchị Ndozigharị Mgbanwe
 18-February-2025  27 Emelitere:
Aha aha, Tebụl 1, Section 1.4, Section 2.1, Section 2, gụnyere
Mmachibido, switch to the 2.17.0 release
Nkeji 3 former releases history
23-June-2025 28 Emelitere:

Aha aha, Tebụl 1, Ngalaba 2, gụnyere Mmachibido, switch to the 2.18.0 release

Nkeji 3 former releases history

ỌMỤMỤ dị mkpa – Gụọ nke ọma

  • STMicroelectronics NV na ndị enyemaka ya (“ST”) debere ikike ime mgbanwe, ndozi, nkwalite, mgbanwe na nkwalite ngwaahịa ST na/ma ọ bụ akwụkwọ a n'oge ọ bụla na-enweghị ọkwa. Ndị na-azụ ahịa kwesịrị ịnweta ozi kacha ọhụrụ dị mkpa na ngwaahịa ST tupu ha etinye iwu. A na-ere ngwaahịa ST dabere na usoro na ọnọdụ ọrịre nke ST n'oge nnabata.
  • Ndị na-azụ ahịa bụ naanị maka nhọrọ, nhọrọ, na ojiji nke ngwaahịa ST yana ST anaghị ewere ụgwọ ọ bụla maka enyemaka ngwa ma ọ bụ imepụta ngwaahịa ndị zụrụ ya.
  • Enweghị ikike, ekwupụtara ma ọ bụ egosipụtara, ikike ikike ọgụgụ isi ọ bụla nke ST nyere n'ime ebe a.
  • Mweghachi nke ngwaahịa ST nwere ndokwa dị iche na ozi e depụtara n'ime ya ga-emebi akwụkwọ ikike ọ bụla ST nyere maka ụdị ngwaahịa a.
  • ST na akara ST bụ ụghalaahịa nke ST. Maka ozi ndị ọzọ gbasara ụghalaahịa ST, rụtụ aka www.st.com/trademarks  Ngwaahịa ma ọ bụ ọrụ ọrụ ndị ọzọ niile bụ nke ndị nwe ha.
  • Ozi dị n'ime akwụkwọ a nọchiri ma dochie ozi enyere na mbụ na ụdị akwụkwọ a mbụ.
  • © 2025 STMicroelectronics – Ikike niile echekwabara

Akwụkwọ / akụrụngwa

STMicroelectronics RN0104 STM32 Cube Monitor RF [pdf] Ntuziaka onye ọrụ
RN0104 STM32 Cube Monitor RF, RN0104, STM32 Cube Monitor RF, Cube Monitor RF, Nyochaa RF

Ntụaka

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *