ʻIkepili huna
1 STMicroelectronics RN0104 STM32 Cube Monitor RF
2 Hoʻolauna
3 Kākoʻo mea kūʻai aku
4 ʻIke nui
5 Hoʻokuʻu ʻike
6 Moʻolelo hoʻoponopono
7 Palapala / Punawai
7.1 Nā kuhikuhi

ST-Microelectronics-Logo

STMicroelectronics RN0104 STM32 Cube Monitor RF

STMicroelectronics-RN0104-STM32-Cube-Monitor-RF-Product-Image

Hoʻolauna

Hoʻonui ʻia kēia memo hoʻokuʻu i kēlā me kēia manawa e hoʻomau i ka STM32CubeMonRF (ma lalo nei i kapa ʻia ʻo STM32CubeMonitor-RF) evolution, pilikia, a me nā palena.
E nānā i ke kākoʻo STMicroelectronics webkahua ma www.st.com for the newest version. For the latest release summary, refer to Table 1.

Papa 1. STM32CubeMonRF 2.18.0 hōʻuluʻulu hoʻokuʻu

ʻAno Hōʻuluʻulu manaʻo
Hoʻokuʻu liʻiliʻi
  • Alignment with STM32CubeWB firmware 1.23.0
  • Alignment with STM32CubeWBA firmware 1.7.0
  •  Upgrade of Java® runtime version from 17.0.10 to 21.0.04
  • Upgrade of supported OpenThread version to 1.4.0 API 377
  • Support of command-line interface (CLI)
  • Hoʻoponopono kino

Kākoʻo mea kūʻai aku

For more information or help concerning STM32CubeMonitor-RF, contact the nearest STMicroelectronics sales office or use the ST community at community.st.com. For a complete list of STMicroelectronics offices and distributors, refer to the www.st.com web ʻaoʻao.

Nā mea hou polokalamu
Hiki ke hoʻoiho ʻia nā mea hou polokalamu a me nā palapala hou loa mai ke kākoʻo STMicroelectronics web ʻaoʻao ma www.st.com/stm32cubemonrf

ʻIke nui

Pauview

STM32CubeMonitor-RF is a tool provided to help designers to:

  • Perform RF (radio frequency) tests of Bluetooth® LE applications
  • Perform RF (radio frequency) tests of 802.15.4 applications
  • Send commands to Bluetooth® LE parts to perform tests
  • Configure Bluetooth® LE beacons and manage file over-the-air (OTA) transfers
  • Discover Bluetooth® LE device profiles a launa pū me nā lawelawe
  • Send commands to OpenThread parts to perform tests
  • Visualize Thread device connections
  • Sniff 802.15.4 network

Pili kēia polokalamu i nā microcontrollers o ka moʻo STM32WB, STM32WB0, a me STM32WBA, e pili ana i nā cores Arm®(a).

Pono nā ʻōnaehana PC hoʻokipa
Kākoʻo ʻia nā ʻōnaehana hana a me nā hale hana

  • Windows®(b) 10 and 11, 64-bit (x64)
  • Linux®(c) Ubuntu®(d) LTS 22.04 and LTS 24.04
  • macOS®(e) 14 (Sonoma), macOS®(e) 15 (Sequoia)

Pono lako polokalamu
For Linux®, the Java®(f) runtime environment (JRE™) is required for the installer. For 802.15.4 sniffer only:

  • Wireshark v2.4.6 or later is available from https://www.wireshark.org
  • Python™ card v3.8 or later is available from https://www.python.org/downloads
  • pySerial v3.4 or later, available from https://pypi.org/project/pyserial
  • ʻO Arm ka inoa inoa inoa o Arm Limited (a i ʻole nā ​​lālā ona) ma ka US a me / a i ʻole ma kahi ʻē.
  • ʻO Windows kahi hōʻailona o ka hui Microsoft o nā hui.
  • ʻO Linux® kahi inoa inoa inoa inoa o Linus Torvalds.
  • Ubuntu® is a registered trademark of Canonical Ltd.
  • ʻO macOS® kahi hōʻailona kālepa o Apple Inc., i hoʻopaʻa inoa ʻia ma US a me nā ʻāina a me nā ʻāina ʻē aʻe.
  • ʻO Oracle a me Java nā inoa inoa inoa o Oracle a me / a i ʻole nā ​​​​mea pili.

Kaʻina hana hoʻonohonoho

ʻO Windows®

Hoʻokomo
If an older version of STM32CubeMonitor-RF is already installed, the existing version must be uninstalled before installing the new one. The user must have administrator rights on the computer to run the installation.

  1. Hoʻoiho iā STM32CMonRFWin.zip.
  2. Wehe i kēia file i kahi manawa pōkole.
  3. Launch STM32CubeMonitor-RF.exe to be guided through the setup process.

Wehe ʻia
To uninstall STM32CubeMonitor-RF, follow the steps below:

  1. Open the Windows Control panel.
  2. Select Programs and Features to display the list of programs installed on the computer.
  3. Left-click on STM32CubeMonitor-RF from the STMicroelectronics publisher and select the Uninstall function.

Linux®

Pono lako polokalamu
Pono ka Java® runtime environment no ka Linux® installer. Hiki ke hoʻokomo ʻia me ke kauoha apt-get install default-jdk a i ʻole ka luna hoʻonohonoho.

Hoʻokomo

  1. Hoʻoiho iā STM32CMonRFLin.tar.gz.
  2. Wehe i kēia file i kahi manawa pōkole.
  3. Make sure you have access rights to the target installation directory.
  4. Launch the execution of the SetupSTM32CubeMonitor-RF.jar file, or launch manually the installation with java -jar <install path>/SetupSTM32CubeMonitor-RF.jar.
  5. An icon appears on the desktop. If the icon is not executable, edit its properties and select the option Allow executing file e like me ka papahana, a i ʻole mai ka Ubuntu® 19.10 ma mua, a koho i ke koho E ʻae i ka hoʻomaka.

ʻIke e pili ana i ke awa COM ma Ubuntu®
The modemmanager process checks the COM port when the board is plugged in. Due to this activity, the COM port is busy for a few seconds, and STM32CubeMonitor-RF cannot connect.
The users need to wait for the end of the modemmanager activity before opening the COM port. If the user does not require the modemmanager, it is possible to uninstall it with the command sudo apt-get purge modemmanager.
For the sniffer mode, the modem manager must be uninstalled or disabled through the command sudo systemctl stop ModemManager.service before connecting the sniffer device.
If the modem manager cannot be disabled, it is also possible to define rules so that the modem manager ignores the sniffer device. The 10-stsniffer.rules file, available in the ~/STMicroelectronics/STM32CubeMonitor-RF/sniffer directory can be copied in /etc/udev/rules.d.

Wehe ʻia  

  1. Launch the uninstaller.jar located in the installation directory /STMicroelectronics/STM32CubeMonitor-RF/Uninstaller. If the icon is not executable, edit its properties and select the option Allow executing file e like me ka papahana.
  2. Select Force deletion… and click on the Uninstall button.

macOS® 

Hoʻokomo

  1. Hoʻoiho iā STM32CMonRFMac.zip.
  2. Wehe i kēia file i kahi manawa pōkole.
  3. Make sure you have access rights to the target installation directory.
  4. Double-click on the installer STM32CubeMonitor-RF.dmg file.
  5. Open the STM32CubeMonitor-RF new disk.
  6. Drag and drop the STM32CubeMonitor-RF shortcut to the Applications shortcut.
  7. Drag and drop the document folder to a location of your choice.

If an error with STM32CubeMonitor-RF an not be opened because it is from an unidentified developer occurs, the command sudo spctl –master-disable must be used to disable the verification.

Wehe ʻia

  1. In the applications folder, select the STM32CubeMonitor-RF icon and move it to trash.
  2. In the user’s home directory, remove the folder Library/STM32CubeMonitor-RF.

If the Library folder is hidden:

  • E wehe i ka mea nāna i loaʻa.
  • Hold down Alt (Option) and choose Go from the drop-down menu bar at the top of the screen.
  • The Library folder is listed below the Home folder.

Kākoʻo ʻia nā polokalamu e STM32CubeMonitor-RF

Nā mea i kākoʻo ʻia
Ua ho'āʻoʻia ka mea hana me ka STM32WB55 Nucleo a me nā papa dongle (P-NUCLEO-WB55), ka STM32WB15 Nucleo board (NUCLEO-WB15CC), ka STM32WB5MM-DK Discovery kit, ka STM32WBA5x Nucleo board, ka STM32WBA6x Nucleo board, ka STM32B0 Nucleo board, ka STMXNUMXWBAXNUMXx Nucleo board, ka STMXNUMXBXNUMX Papa Nucleo.

The boards based on STM32WBxx are compatible if they feature:

  • A connection through a USB Virtual COM port or a serial link and
  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Thread_Cli_Cmd for Thread
    • Phy_802_15_4_Cli for 802.15.4 RF test
    • Mac_802_15_4_Sniffer.bin for sniffer

The boards based on STM32WBAxx are compatible if they feature: • A connection through a serial link and

  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Thread_Cli_Cmd for Thread
    • Phy_802_15_4_Cli for 802.15.4 RF test
      The boards based on STM32WB0x are compatible if they feature:
  • A connection through a serial link and
  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Hōʻike ʻia nā kikoʻī pili pili a me ka wahi paʻa paʻa ma ka Pauku 2 o ka mea hoʻohana STM32CubeMonitor-RF lako polokalamu lako polokalamu no nā ana hana uila (UM2288).

Hoʻokuʻu ʻike

Nā hiʻohiʻona / hoʻonui hou

  • Alignment with STM32CubeWB firmware 1.23.0
  • Alignment with STM32CubeWBA firmware 1.7.0
  • Upgrade of Java® runtime version from 17.0.10 to 21.0.04
  • Upgrade of supported OpenThread version to 1.4.0 API 377
  • Support of command-line interface (CLI)

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issue 64748 – Add a dialog to select the beacon file
  • Fixes issue 202582 – [802.15.4 Sniffer] Incorrect RSS report value
  • Fixes issue 204195 – Some ACI/HCI commands do not send 16-bit UUID parameter
  • Fixes issue 204302 – VS_HCI_C1_DEVICE_INFORMATION DBGMCU_ICODE typo – DBGMCU_ICODER for STM32WBA
  • Fixes issue 204560 – [STM32WB0] Transmission packet count is abnormal on PER test

Kaohi ana

  • When the device under test is disconnected, the software might not immediately detect the disconnection. In this case, an error is reported when a new command is sent. If the board is not detected after the error, it is necessary to unplug it and then reconnect it.
  • For sniffer on macOS®, the sniffer Python™ file pono e hoʻonoho ʻia me kahi hoʻokō pono ma hope o ke kope. ʻO ke kauoha ʻo chmod+x stm32cubeMonRf_sniffer.py.
  • ʻAʻole kākoʻo ʻia nā mana firmware STM32WB ma mua o 1.16, koi ʻia kahi mana hou.
  • Ma nā ho'āʻo STM32WB0x Bluetooth® LE RF a me nā ho'āʻo STM32WBAxx RX, ʻaʻole hāʻawi ʻia nā waiwai ana RSSI.
  • ʻAʻole hana nā panela Beacon a me ACI Utilities no STM32WB05N.
  • No nā STM32WBxx a me STM32WBAx, ma nā ho'āʻo Bluetooth® LE RX a me PER, ua noi ʻia ka waiwai PHY 0x04 akā ʻaʻole kākoʻo ʻia e ka mea hoʻokipa. Ke alakaʻi nei kēia i ka loaʻa ʻole o ka ʻeke.

Laikini
Hāʻawi ʻia ʻo STM32CubeMonRF ma lalo o ka palapala laikini polokalamu SLA0048 a me kāna mau ʻōlelo laikini hou.

STM32CubeMonitor-RF hoʻokuʻu ʻike

STM32CubeMonitor-RF V1.5.0
Tool first version to support Bluetooth® Low Energy features of STM32WB55xx.
Versions 1.x.y have only Bluetooth® Low Energy support.

STM32CubeMonitor-RF V2.1.0
Addition of OpenThread support in the tool

STM32CubeMonitor-RF V2.2.0

  • Improvement of OpenThread command windows: Option to clear windows/history, details about OT commands selected in the tree
  • Addition of read param and set param buttons for OT commands used to read or set parameters
  • Addition of scripts for OpenThread
  • It is possible to add a loop in the script (refer to the user manual for details)
  • User interface update: the disabled items are now colored in gray
  • Implementation of search command for threads
  • Addition of the selection of Bluetooth® Low Energy PHY and modulation index
  • In Bluetooth® Low Energy RF tests, the frequency can be changed when the test is running

STM32CubeMonitor-RF V2.2.1

Nā hiʻohiʻona / hoʻonui hou
The OTA download procedure is updated: When the target device configuration is in OTA loader mode, the target address is incremented by one. STM32CubeMonitor-RF now uses the incremented address for the download.
The list of OpenThread commands is aligned with the Thread® stack.

STM32CubeMonitor-RF V2.3.0

Nā hiʻohiʻona / hoʻonui hou

  • Alignment with STM32WB55 cube firmware 1.0.0
  • Addition of 802.15.4 RF tests
  • New features in the ACI Utilities panel:
  • The discovery of remote Bluetooth® Low Energy devices
  • Interaction with the services of remote devices

STM32CubeMonitor-RF V2.4.0

Nā hiʻohiʻona / hoʻonui hou

  • Alignment with STM32WB cube firmware 1.1.1
  • Support the over-the-air firmware update of the wireless stack (FUOTA).
  • Optimize FUOTA connection parameters to increase performance. Adds a warning if the address is below 0x6000.
  • Correction of UART detection issue on Windows® 10
  • The tool properly uses the write without response function to write a characteristic with write without response permission.
  • Update the device name in the device information box.
  • Fix the value of HCI_LE_SET_EVENT_MASK.
  • Correction of the text about the error reason description
  • Fix issues with OpenThread scripts.
  • Set a maximum size for graphs.
  • Update some control locks to prevent wrong actions from the user.

STM32CubeMonitor-RF V2.5.0

Nā hiʻohiʻona / hoʻonui hou

  • Network Explorer is added to a new tab of Thread® mode.
  • This feature displays the connected Thread® devices and the connections between them.

STM32CubeMonitor–RF V2.6.0

Nā hiʻohiʻona / hoʻonui hou

RF tests are added.
In the transmitter test, the sending of MAC frames is available. The user defines the frame.
In the receiver test, the LQI, ED, and CCA tests are available and the PER test shows the decoded frames.

Pilikia paʻa

ʻO kēia hoʻokuʻu: 

  • Updates the C1_Read_Device_Information command description,
  • Disables the navigation link when the 802.15.4 receiver test is in progress,
  • Updates ST logo and colors,
  • Fixes the blank popup message displayed when the script detects an error,
  • Disables the start button as soon as the channel list is inconsistent in the 802.15.4 PER multichannel test,
  • And includes a workaround to prevent freeze observed on a serial port with macOS®.

STM32CubeMonitor-RF V2.7.0

Nā hiʻohiʻona / hoʻonui hou
Hoʻohou i ka OpenThread API me ka mana 1.1.0. Hoʻohui i ka OpenThread CoAP palekana API. Hoʻohui i ke ʻano sniffer 802.15.4.

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes the address bytes inverted in the OTA updater panel,
  • Fixes the OpenThread network explore button label management,
  • Fixes the behavior of the parameter field when the parameter is from the terminal and is wrong,
  • Fixes the naming of Bluetooth® Low Energy commands according to the AN5270 specification,
  • Fixes the connection fail behavior of the OpenThread COM port,
  • Fixes Bluetooth® Low Energy tester connection fail behavior on Linux®,
  • Fixes OpenThread panId hexadecimal value display,
  • Improve SBSFU OTA and tests,
  • Fixes ACI client characteristic configuration after reconnection.

STM32CubeMonitor-RF V2.7.1

Nā hiʻohiʻona / hoʻonui hou

Sniffer fixes.

Pilikia paʻa

ʻO kēia hoʻokuʻu:
Fixes the error on quick Wireshark sniffer stop then start.
Removes two extra bytes in sniffed data.

STM32CubeMonitor-RF V2.8.0

Nā hiʻohiʻona / hoʻonui hou

OTA improvement:

  • Adds an option in the OTA panel to increase the packet length (MTU) to optimize speed.
  • Adds a menu to select the target. It is required to compute the number of sectors to erase for SMT32WB15xx.
  • Removes the modulations not suitable for the PER test in the PER picklist.

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issue 102779: Displaying offset and attribute data length is reversed for ACI_GATT_ATTRIBUTE_MODIFIED_EVENT.
  • Aligns the message HCI_ATT_EXCHANGE_MTU_RESP_EVENT with AN5270.
  • Fixes the attribute name in HCI_LE_DATA_LENGTH_CHANGE_EVENT.
  • Improves the welcome screen layout for small screens.

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issue 64425: Send command button unlocked during OTA transfer.
  • Fixes issue 115533: During the OTA update, the issue in the
  • ACI_GAP_START_GENERAL_DISCOVERY_PROC command.
  • Fixes issue 115760:
  • During OTA updates, when the Optimize MTU size check box is ticked, the download stops after the MTU size exchange.
  • Fixes issue 117927: change address type to public device address for OTA.
  • Fixes issue 118377: wrong sector size erased before OTA transfer.
  • Set OTA block size according to MTU size exchange.

Nā hiʻohiʻona / hoʻonui hou

  • Adds compatibility with the OpenThread stack of STM32Cube_FW_V1.14.0. This stack is based on the OpenThread 1.2 stack and supports the O.T. 1.1 commands.
  • Adds new Bluetooth® Low Energy commands and events. Updates some existing commands to be compatible with the release 1.14.0 of the stack.

Commands added:

    • HCI_LE_READ_TRANSMIT_POWER,
    • HCI_LE_SET_PRIVACY_MODE,
    • ACI_GAP_ADD_DEVICES_TO_LIST,
    • HCI_LE_READ_RF_PATH_COMPENSATION,
    • HCI_LE_WRITE_RF_PATH_COMPENSATION
  • Events added:
    • HCI_LE_EXTENDED_ADVERTISING_REPORT_EVENT,
    • HCI_LE_SCAN_TIMEOUT_EVENT,
    • HCI_LE_ADVERTISING_SET_TERMINATED_EVENT,
    • HCI_LE_SCAN_REQUEST_RECEIVED_EVENT,
    • HCI_LE_CHANNEL_SELECTION_ALGORITHM_EVENT
  • Command removed:
    • ACI_GAP_START_NAME_DISCOVERY_PROC
  • Command updated (parameters or description):
    • ACI_HAL_GET_LINK_STATUS,
    • HCI_SET_CONTROLLER_TO_HOST_FLOW_CONTROL,
    • HCI_HOST_BUFFER_SIZE,
    • ACI_HAL_WRITE_CONFIG_DATA,
    • ACI_GAP_SET_LIMITED_DISCOVERABLE,
    • ACI_GAP_SET_DISCOVERABLE,
    • ACI_GAP_SET_DIRECT_CONNECTABLE,
    • ACI_GAP_INIT,
    • ACI_GAP_START_GENERAL_CONNECTION_ESTABLISH_PROC,
    • ACI_GAP_START_SELECTIVE_CONNECTION_ESTABLISH_PROC,
    • ACI_GAP_CREATE_CONNECTION,
    • ACI_GAP_SET_BROADCAST_MODE,
    • ACI_GAP_START_OBSERVATION_PROC,
    • ACI_GAP_GET_OOB_DATA,
    • ACI_GAP_SET_OOB_DATA,
    • ACI_GAP_ADD_DEVICES_TO_RESOLVING_LIST,
    • ACI_HAL_FW_ERROR_EVENT,
    • HCI_LE_READ_ADVERTISING_PHYSICAL_CHANNEL_TX_POWER,
    • HCI_LE_ENABLE_ENCRYPTION,
    • HCI_LE_LONG_TERM_KEY_REQUEST_NEGATIVE_REPLY,
    • HCI_LE_RECEIVER_TEST_V2,
    • HCI_LE_TRANSMITTER_TEST_V2,
    • ACI_HAL_WRITE_CONFIG_DATA,
    • ACI_GAP_SET_DIRECT_CONNECTABLE,
    • HCI_LE_SET_EVENT_MASK,
    • HCI_LE_TRANSMITTER_TEST

Nā mea hou 802.15.4 sniffer firmware no STM32WB55 Nucleo a me ka firmware hou no STM32WB55 USB dongle

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issue 130999: Some packets are missed in the PER test.
  • Fixes issue 110073: Some panId values cannot be set in the Network Explorer tab.

STM32CubeMonitor-RF V2.9.1

Nā hiʻohiʻona / hoʻonui hou

  • Updates 802.15.4 sniffer firmware software.
  • Fixes some issues reported on version 2.9.0.
  • Fixes issue 131905: The Bluetooth® Low Energy TX LE PHY menu is not visible in RF tests.
  • Fixes issue 131913: The tools do not identify some Bluetooth® Low Energy versions.

Kaohi ana
ʻAʻole hāʻawi kēia mana o STM32CubeMonitor-RF i nā kauoha hoʻolaha hoʻonui. No kekahi mau hana (FUOTA, ACI scan), pono e hoʻohana ʻia ka pūʻulu Bluetooth® Low Energy me ka hoʻolaha hoʻoilina. E nānā i ka mea hoʻohana manual UM2288 e ʻike i ka firmware pono e hoʻohana.

STM32CubeMonitor-RF V2.10.0

Nā hiʻohiʻona / hoʻonui hou

  • Alignment with STM32CubeWB firmware 1.15.0
  • OpenThread 1.3 support
  • Bluetooth® Low Energy extended advertising support
  • Bluetooth® Low Energy commands alignment with AN5270 Rev. 16
  • New Bluetooth® Low Energy RSSI acquisition method

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issue 133389: A command with variable length crashes the tool.
  • Fixes issue 133695: Bluetooth® Low Energy missing
  • HCI_LE_TRANSMITTER_TEST_V2 PHY input parameter.
  • Fixes issue 134379: RF transmitter test, payload size is limited to 0x25.
  • Fixes issue 134013: Wrong text seen after launching and stopping tests by checking the Get RSSI box.

STM32CubeMonitor-RF V2.11.0

Nā hiʻohiʻona / hoʻonui hou

  • Support of STM32WBAxx devices except for OTA firmware update
  • Continuous wave mode in the 802.15.4 transmitter test (STM32CubeWB firmware 1.11.0 and later)
  • Availability to save Bluetooth® Low Energy ACI log information in a csv formatted file
  • Alignment with STM32CubeWB firmware 1.16.0
  • Alignment with STM32CubeWBA firmware 1.0.0
  • Update of 802.15.4 sniffer firmware
  • Removal of 802.15.4 RX_Start command before RX_get and Rs_get_CCA

Pilikia paʻa
ʻO kēia hoʻokuʻu:

  • Fixes issue 139468: Advertising test generates all advertising channels without being selected
  • Fixes issue 142721: Event with the length of the next param on more than 1 byte is not managed
  • Fixes issue 142814: Unable to set some command parameters with variable length
  • Fixes issue 141445: VS_HCI_C1_WRITE_REGISTER – ERROR found in script results
  • Fixes issue 143362: The tool gets blocked when setting the variable param length to 0

Kaohi ana

  • Puka hou 139237: Ma ka papa ACI, i ka wā e hoʻomaka ai ka hoʻolaha ma mua o ka hoʻokō ʻia ʻana o kahi scan, ʻaʻole hoʻokele pono ka mea hana i ka ikona hoʻolaha a me ka mokuʻāina.
  • Puka hou ma ka ACI Utilities panel: ʻAʻole hiki ke hoʻomaka i kahi scan inā hoʻomaka ka hoʻolaha. Pono e kāpae ʻia ka hoʻolaha ma mua.

STM32CubeMonitor-RF V2.12.0

Nā hiʻohiʻona / hoʻonui hou

  • Alignment with STM32CubeWB firmware 1.17.0
  • Alignment with STM32CubeWBA firmware 1.1.0
  • Fix advertising issues using GAP commands instead of legacy
  • Add STM32WBA OTA firmware update support
  • Fix 802.15.4 sniffer issues around the Python™ script
  • Upgrade Java® runtime version from 8 to 17
  • Update missing Bluetooth® Low Energy parameters values and description

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issues 149148 and 149147: 802.15.4 sniffer leading into negative timestamps on Wireshark
  • Fixes issue 150852: Bluetooth® Low Energy OTA profile application could not be discovered on STM32WBAxx
  • Fixes issue 150870: Missing parameters description in HTML wireless interface
  • Fixes issue 147338: Gatt_Evt_Mask parameter must be a bit mask
  • Fixes issue 147386: Missing ACI command to control antenna switching mechanism for AoA/AoD
  • Fixes issue 139237: Improve the advertising mechanism

STM32CubeMonitor-RF V2.13.0

Nā hiʻohiʻona / hoʻonui hou

  • Alignment with STM32CubeWB firmware 1.18.0
  • Alignment with STM32CubeWBA firmware 1.2.0
  • Add 802.15.4 support for STM32WBAxx devices
  • Add OpenThread support for STM32WBAxx devices

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issue 161417: Combo Box not displayed on 802.15.4 Start TX
  • Fixes issue 159767: Replace the Twitter bird logo with the X logo
  • Fixes issue 152865: Transfer of firmware via OTA from WB55 device connected to STM32CubeMonitor-RF to device type WBA5x not active
  • Fixes issue 156240: Missing interval of parameter’s possible values in tool description
  • Fixes issue 95745 [802.15.4 RF]: No information displayed about the device ID connected
  • Fixes issue 164784: Error using online beacon with a random address
  • Fixes issues 163644 and 166039: Error using advertising with a random or public not connectable device address
  • Fixes issue 69229: Scanning cannot stop when advertising is running.

STM32CubeMonitor-RF V2.14.0

Nā hiʻohiʻona / hoʻonui hou

  • Alignment with STM32CubeWB firmware 1.19.0
  • Alignment with STM32CubeWBA firmware 1.3.0
  • Upgrade supported OpenThread version to 1.3.0 API 340

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issues 165981 and 172847 to stabilize Linux® and macOS®, 802.15.4 sniffer behavior
  • Fixes issues 165552 and 166762 to improve scan and advertising features
  • Fixes issue 172471 to extend STM32WBA 802.15.4 power range

STM32CubeMonitor-RF V2.15.0

Nā hiʻohiʻona / hoʻonui hou

  • Alignment with STM32CubeWB firmware 1.20.0
  • Alignment with STM32CubeWBA firmware 1.4.0
  • Add support of STM32CubeWB0 firmware 1.0.0
  • Upgrade Java® runtime version from 17.0.2 to 17.0.10

Pilikia paʻa

  • ʻO kēia hoʻokuʻu:
  • Fixes issue 174238 – 802.15.4 sniffer malformed packet in Wireshark

STM32CubeMonitor-RF V2.15.1

Nā hiʻohiʻona / hoʻonui hou
Add support of STM32WB05N firmware 1.5.1

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issue 185689: The first value of power in the ACI Utilities panel is not displayed for STM32WB or STM32WBA
  • Fixes issue 185753: Add STM32WB06 in STM32CubeMonitor-RF

Nā hiʻohiʻona / hoʻonui hou

  • Alignment with STM32CubeWB firmware 1.21.0
  • Alignment with STM32CubeWBA firmware 1.5.0
  • Alignment with STM32CubeWB0 firmware 1.1.0
  • Upgrade supported OpenThread stack to API 420 version 1.3.0
  • Update 802.15.4 sniffer firmware
  • Add STM32WB0X FUOTA support
  • Improve path management

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issue 193557 – Vulnerability of commons-io
  • Fixes issue 190807 – FUOTA image base address management
  • Fixes issue 188490 – WBA PER test change to get RSSI
  • Fixes issue 191135 – Cannot connect to STM32WB15
  • Fixes issue 190091 – Connection to WB05N does not work the first time
  • Fixes issue 190126 – OpenThread, device information menu disabled
  • Fixes issue 188719 – Error in baud rate value
    3.23 STM32CubeMonitor-RF V2.17.0
    3.23.1 New features/enhancements
  • Alignment with STM32CubeWB firmware 1.22.0
  • Alignment with STM32CubeWBA firmware 1.6.0
  • Alignment with STM32CubeWB0 firmware 1.2.0
  • Support of STM32WBA6x devices

Pilikia paʻa

ʻO kēia hoʻokuʻu:

  • Fixes issue 185894 – Support STM32WB1x BLE_Stack_light_fw upgrade
  • Fixes issue 195370 – ACI_GAP_SET_NON_DISCOVERABLE return Command disallowed error
  • Fixes issue 196631 – Could not perform RF Tests on WB05X

Moʻolelo hoʻoponopono

Papa 2. Moolelo hooponopono palapala

Lā Hoʻoponopono Nā hoʻololi
02-Mar-2017 1 Hoʻokuʻu mua.
  25-ʻApelila-2017   2 Modified for release 1.2.0:–  updated Section 2: Release information–  updated Section 2.3: Restrictions–  added Section 3.2: STM32CubeMonitor-RF V1.2.0 information
   27-Iun-2017    3 Changed document classification to ST Restricted.Modified for release 1.3.0, hence updated document title and addedSection 3.3: STM32CubeMonitor-RF V1.3.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3: Setup procedure, Hoʻonohonoho ʻōnaehana, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions a Section 3.2: STM32CubeMonitor-RF V1.2.0 information.
    29-Sepatemaba-2017     4 Hoʻololi ʻia no ka hoʻokuʻu ʻana i ka 1.4.0, no laila ua hōʻano hou ʻia ka inoa palapala a hoʻohui ʻiaSection 3.4: STM32CubeMonitor-RF V1.4.0 information.Updated Mahele 1.1: Pauview, Section 1.2: Host PC system requirements, Section 1.3.1: Windows, Section 1.4: Devices supported by STM32CubeMonitor-RF, Section 2.1: New features/enhancements, Section 2.2: Fixed issues a Section 2.3: Restrictions.Added Section 1.3.2: Linux®, Section 1.3.3: macOS®, a Section 2.4: Licensing.Updated Table 1: STM32CubeMonitor-RF 1.4.0 release summary.
   29-Ian-2018    5 Hoʻololi ʻia no ka hoʻokuʻu ʻana i ka 1.5.0, no laila ua hōʻano hou ʻia ka inoa palapala a hoʻohui ʻiaSection 3.5: STM32CubeMonitor-RF V1.5.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3.2: Linux®, Hoʻonohonoho ʻōnaehana, Section 2.1: New features/enhancements, Section 2.2: Fixed issues a Section 2.3: Restrictions.Updated Table 1: STM32CubeMonitor-RF 1.5.0 release summary aTable 2: List of licenses.
   14-Mei-2018    6 Hoʻololi ʻia no ka hoʻokuʻu ʻana i ka 2.1.0, no laila ua hōʻano hou ʻia ka inoa palapala a hoʻohui ʻiaSection 3.6: STM32CubeMonitor-RF V2.1.0 information.Updated Mahele 1.1: Pauview, Section 1.2: Host PC system requirements, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions.Hoʻohou Table 1: STM32CubeMonitor-RF 2.1.0 release summary aTable 2: List of licenses.
   24-ʻAukake-2018    7 Hoʻololi ʻia no ka hoʻokuʻu ʻana i ka 2.2.0, no laila ua hōʻano hou ʻia ka inoa palapala a hoʻohui ʻiaSection 3.7: STM32CubeMonitor-RF V2.2.0 information.Updated Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.2: Restrictions.Updated Table 1: STM32CubeMonitor-RF 2.3.0 release summary aTable 2: List of licenses.
Lā Hoʻoponopono Nā hoʻololi
   15-ʻOkakopa-2018    8 Hoʻololi ʻia no ka hoʻokuʻu ʻana i ka 2.2.1, no laila ua hōʻano hou ʻia ka inoa palapala a hoʻohui ʻiaSection 3.8: STM32CubeMonitor-RF V2.2.1 information.Updated Mahele 1.1: Pauview, Section 1.3.2: Linux®, Section 1.3.3: macOS®, Section 2.1: New features/enhancements, a Section 2.2: Restrictions.Removed former Section 2.2: Fixed issues.
  15-Feb-2019   9 Updated:–  Title, Papa 1, a Pauku 2 switch to the 2.3.0 release–  Pauku 3 former releases history–  Mahele 1.1: Pauview to add OpenThread and 802.15.4 RF–  Section 1.3: Setup procedure with different OS
  12-Iulai-2019   10 Updated:–  Title, Papa 1, a Pauku 2 switch to the 2.4.0 release–  Papa 2 jSerialComm version–  Pauku 3 former releases history
  03-ʻApelila-2020   11 Updated:–  Title, Papa 1, a Pauku 2 switch to the 2.5.0 release–  Papa 2 Inno setup version–  Pauku 3 former releases history
  13-Nov-2020   12 Updated:–  Title, Papa 1, a Pauku 2 switch to the 2.6.0 release–  Papa 2 a Papa 3 details in an added copyright column–  Pauku 3 former releases history
  08-Feb-2021   13 Updated:–  Title, Papa 1, Pauku 1, a Pauku 2 switch to the 2.7.0 release with new802.15.4 sniffer mode and Pono nā ʻōnaehana PC hoʻokipa–  Papa 3 Java SE and Java FX version–  Pauku 3 former releases history
  08-Iun-2021   14 Updated:–  Title, Papa 1, a Pauku 2 switch to the 2.7.1 release with 802.15.4 sniffer fixes–  Pauku 3 former releases history
    15-Iulai-2021     15 Updated:–  Title, Papa 1, a Pauku 2 switch to the 2.8.0 release with OTA speed improvement and new OTA option for STM32WB15xx–  Pauku 1.4 NUCLEO-WB15CC support and test firmware explanation–  Papa 2 with SLA0048 in Laikini–  Papa 3 with Inno setup version–  Pauku 3 former releases history
  21-Dek-2021   16 Updated:–  Title, Papa 1, a Pauku 2.1 switch to the 2.8.1 release with fixes for Bluetooth® Low Energy OTA–  Pauku 3 former releases history
Lā Hoʻoponopono Nā hoʻololi
07-Iulai-2022 17 Hōʻano hou ʻia:
  • Poʻo inoa, Papa 1, a Pauku 2.1 switch to the 2.9.0 release
  • Python™ card version in Pono lako polokalamu
  • Section 2.4: Licensing replacing tables with the suitable license agreement statement
  • Pauku 3 former releases history
14-Sepatemaba-2022 18 Hōʻano hou ʻia:
  • Poʻo inoa, Papa 1, a Pauku 2 switch to the 2.9.1 release
  • Java FX-GTK3 conflict moved from Kaohi ana to Linux® Hoʻokomo
  • Pauku 3 former releases history
29-Nov-2022 19 Hōʻano hou ʻia:
  • Poʻo inoa, Papa 1, a Pauku 2 switch to the 2.10.0 release
  • Removed note on fixed GTK2 issue in Linux® Hoʻokomo
  • Pauku 3 former releases history
03-Mar-2023 20 Hōʻano hou ʻia:
  • Poʻo inoa, Papa 1, a Pauku 2 switch to the 2.11.0 release
  • Pauku 3 former releases history
4-Iulai-2023 21 Hōʻano hou ʻia:

Poʻo inoa, Papa 1, a Pauku 2 switch to the 2.12.0 release
Pauku 3 former releases history
23-Nov-2023 22 Hōʻano hou ʻia:

Poʻo inoa, Papa 1, a Pauku 2 switch to the 2.13.0 release

Pauku 3 former releases history
14-Mar-2024 23 Hōʻano hou ʻia:
  • Poʻo inoa, Papa 1, a Pauku 2 switch to the 2.14.0 release
  • macOS® versions in Kākoʻo ʻia nā ʻōnaehana hana a me nā hale hana
  • Pauku 3 former releases history
01-Iulai-2024 24 Hōʻano hou ʻia:
  • Poʻo inoa, Papa 1, a Pauku 2 switch to the 2.15.0 release
  • Nucleo boards in Kākoʻo ʻia nā polokalamu e STM32CubeMonitor-RF
  • Pauku 3 former releases history
12-Sepatemaba-2024 25 Hōʻano hou ʻia:
Poʻo inoa, Papa 1, a Māhele 2, komo Kaohi ana, switch to the 2.15.1 releasePauku 3 former releases history
22-Nov-2024 26 Hōʻano hou ʻia:
  • Poʻo inoa, Papa 1, a Māhele 2, komo Kaohi ana, switch to the 2.16.0 release
  • Linux® and macOS® versions in Kākoʻo ʻia nā ʻōnaehana hana a me nā hale hana
  • Pauku 3 former releases history
Lā Hoʻoponopono Nā hoʻololi
 18-Feb-2025  27 Hōʻano hou ʻia:
Poʻo inoa, Papa 1, Section 1.4, Section 2.1, Section 2, komo
Kaohi ana, switch to the 2.17.0 release
Pauku 3 former releases history
23-Iun-2025 28 Hōʻano hou ʻia:

Poʻo inoa, Papakaukau 1, Māhele 2, komo Kaohi ana, switch to the 2.18.0 release

Pauku 3 former releases history

HOOLAHA NUI – HELUHELU ALOHA

  • Ua mālama ʻo STMicroelectronics NV a me kāna mau lālā ("ST") i ke kuleana e hoʻololi, hoʻoponopono, hoʻonui, hoʻololi, a me nā hoʻomaikaʻi ʻana i nā huahana ST a/a i kēia palapala i kēlā me kēia manawa me ka ʻole o ka ʻike. Pono nā mea kūʻai e loaʻa ka ʻike pili hou loa i nā huahana ST ma mua o ke kau ʻana i nā kauoha. Kūʻai ʻia nā huahana ST e like me nā ʻōlelo a me nā kūlana kūʻai o ST ma kahi i ka manawa o ka ʻae ʻana i ke kauoha.
  • Na nā mea kūʻai aku ke kuleana no ke koho ʻana, koho ʻana, a me ka hoʻohana ʻana i nā huahana ST a ʻaʻohe kuleana o ST no ke kōkua noi a i ʻole ka hoʻolālā ʻana i nā huahana a nā mea kūʻai aku.
  • ʻAʻole hāʻawi ʻia ka laikini, hōʻike a i ʻole ka manaʻo, i kekahi kuleana waiwai naʻauao e ST ma ʻaneʻi.
  • ʻO ke kūʻai hou ʻana i nā huahana ST me nā mea ʻokoʻa mai ka ʻike i hōʻike ʻia ma ʻaneʻi e hoʻopau i kekahi palapala hōʻoia i hāʻawi ʻia e ST no ia huahana.
  • ʻO ST a me ka hōʻailona ST he mau hōʻailona o ST. No ka ʻike hou aku e pili ana i nā hōʻailona ST, e nānā i www.st.com/trademarks  ʻO nā huahana ʻē aʻe a i ʻole nā ​​lawelawe lawelawe nā waiwai o kā lākou mau ʻona.
  • Hoʻololi a hoʻololi ka ʻike i loko o kēia palapala i ka ʻike i hāʻawi mua ʻia ma nā mana mua o kēia palapala.
  • © 2025 STMicroelectronics – Ua mālama ʻia nā kuleana āpau

Palapala / Punawai

STMicroelectronics RN0104 STM32 Cube Monitor RF [pdf] Ke alakaʻi hoʻohana
RN0104 STM32 Cube Monitor RF, RN0104, STM32 Cube Monitor RF, Cube Monitor RF, Nānā RF

Nā kuhikuhi

Waiho i kahi manaʻo

ʻAʻole e paʻi ʻia kāu leka uila. Hōʻailona ʻia nā kahua i makemake ʻia *