مواد لڪائڻ
1 STMicroelectronics RN0104 STM32 ڪيوب مانيٽر آر ايف
2 تعارف
3 ڪسٽمر حمايت
4 عام معلومات
5 ڄاڻ جاري ڪريو
6 نظرثاني جي تاريخ
7 دستاويز / وسيلا
7.1 حوالو

ST-Microelectronics-Logo

STMicroelectronics RN0104 STM32 ڪيوب مانيٽر آر ايف

STMicroelectronics-RN0104-STM32-Cube-Monitor-RF-Product-Image

تعارف

هي رليز نوٽ وقت بوقت اپڊيٽ ڪيو ويندو آهي ته جيئن STM32CubeMonRF (هتي STM32CubeMonitor-RF جي نالي سان حوالو ڏنو ويو آهي) جي ارتقا، مسئلن ۽ حدن کان باخبر رهي سگهجي.
STMicroelectronics سپورٽ چيڪ ڪريو webسائيٽ تي www.st.com for the newest version. For the latest release summary, refer to Table 1.

ٽيبل 1. STM32CubeMonRF 2.18.0 رليز خلاصو

قسم خلاصو
ننڍي ڇڏڻ
  • Alignment with STM32CubeWB firmware 1.23.0
  • Alignment with STM32CubeWBA firmware 1.7.0
  •  Upgrade of Java® runtime version from 17.0.10 to 21.0.04
  • Upgrade of supported OpenThread version to 1.4.0 API 377
  • Support of command-line interface (CLI)
  • بگ فيڪس

ڪسٽمر حمايت

For more information or help concerning STM32CubeMonitor-RF, contact the nearest STMicroelectronics sales office or use the ST community at community.st.com. For a complete list of STMicroelectronics offices and distributors, refer to the www.st.com web صفحو.

سافٽ ويئر اپڊيٽ
سافٽ ويئر اپڊيٽ ۽ سڀ تازيون دستاويز STMicroelectronics سپورٽ تان ڊائون لوڊ ڪري سگھجن ٿيون. web صفحي تي www.st.com/stm32cubemonrf

عام معلومات

مٿانview

STM32CubeMonitor-RF is a tool provided to help designers to:

  • Perform RF (radio frequency) tests of Bluetooth® LE applications
  • Perform RF (radio frequency) tests of 802.15.4 applications
  • Send commands to Bluetooth® LE parts to perform tests
  • Configure Bluetooth® LE beacons and manage file over-the-air (OTA) transfers
  • Discover Bluetooth® LE device profile۽ خدمتن سان لهه وچڙ ڪريو
  • Send commands to OpenThread parts to perform tests
  • Visualize Thread device connections
  • Sniff 802.15.4 network

هي سافٽ ويئر Arm®(a) ڪور تي ٻڌل STM32WB، STM32WB0، ۽ STM32WBA سيريز جي مائڪرو ڪنٽرولرز تي لاڳو ٿئي ٿو.

هوسٽ پي سي سسٽم گهرجون
سپورٽ ٿيل آپريٽنگ سسٽم ۽ آرڪيٽيڪچر

  • Windows®(b) 10 and 11, 64-bit (x64)
  • Linux®(c) Ubuntu®(d) LTS 22.04 and LTS 24.04
  • macOS®(e) 14 (Sonoma), macOS®(e) 15 (Sequoia)

سافٽ ويئر گهرجون
For Linux®, the Java®(f) runtime environment (JRE™) is required for the installer. For 802.15.4 sniffer only:

  • Wireshark v2.4.6 or later is available from https://www.wireshark.org
  • Python™ card v3.8 or later is available from https://www.python.org/downloads
  • pySerial v3.4 or later, available from https://pypi.org/project/pyserial
  • Arm آمريڪا ۽/يا ٻين هنڌن تي Arm Limited (يا ان جي ماتحت ادارن) جو رجسٽرڊ ٽريڊ مارڪ آهي.
  • ونڊوز مائڪروسافٽ گروپ آف ڪمپنين جو ٽريڊ مارڪ آھي.
  • Linux® هڪ رجسٽرڊ ٽريڊ مارڪ آهي Linus Torvalds جو.
  • Ubuntu® is a registered trademark of Canonical Ltd.
  • macOS® Apple Inc. جو ٽريڊ مارڪ آھي، جيڪو آمريڪا ۽ ٻين ملڪن ۽ علائقن ۾ رجسٽر ٿيل آھي.
  • Oracle ۽ Java رجسٽرڊ ٽريڊ مارڪ آهن Oracle ۽/يا ان سان لاڳاپيل ادارن جا.

سيٽ اپ جو عمل

ونڊوز®

انسٽال ڪريو
If an older version of STM32CubeMonitor-RF is already installed, the existing version must be uninstalled before installing the new one. The user must have administrator rights on the computer to run the installation.

  1. STM32CMonRFWin.zip ڊائون لوڊ ڪريو.
  2. ان زپ ڪريو file هڪ عارضي جڳهه ڏانهن.
  3. Launch STM32CubeMonitor-RF.exe to be guided through the setup process.

انسٽال ڪريو
To uninstall STM32CubeMonitor-RF, follow the steps below:

  1. Open the Windows Control panel.
  2. Select Programs and Features to display the list of programs installed on the computer.
  3. Left-click on STM32CubeMonitor-RF from the STMicroelectronics publisher and select the Uninstall function.

لينڪس®

سافٽ ويئر گهرجون
Linux® انسٽالر لاءِ جاوا® رن ٽائم ماحول گهربل آهي. ان کي apt-get install default-jdk ڪمانڊ يا پيڪيج مئنيجر سان انسٽال ڪري سگهجي ٿو.

انسٽال ڪريو

  1. STM32CMonRFLin.tar.gz ڊائون لوڊ ڪريو.
  2. ان زپ ڪريو file هڪ عارضي جڳهه ڏانهن.
  3. Make sure you have access rights to the target installation directory.
  4. Launch the execution of the SetupSTM32CubeMonitor-RF.jar file, or launch manually the installation with java -jar <install path>/SetupSTM32CubeMonitor-RF.jar.
  5. An icon appears on the desktop. If the icon is not executable, edit its properties and select the option Allow executing file پروگرام جي طور تي، يا Ubuntu® 19.10 کان اڳتي، ۽ اختيار چونڊيو لانچ ڪرڻ جي اجازت ڏيو.

Ubuntu® تي COM پورٽ بابت معلومات
The modemmanager process checks the COM port when the board is plugged in. Due to this activity, the COM port is busy for a few seconds, and STM32CubeMonitor-RF cannot connect.
The users need to wait for the end of the modemmanager activity before opening the COM port. If the user does not require the modemmanager, it is possible to uninstall it with the command sudo apt-get purge modemmanager.
For the sniffer mode, the modem manager must be uninstalled or disabled through the command sudo systemctl stop ModemManager.service before connecting the sniffer device.
If the modem manager cannot be disabled, it is also possible to define rules so that the modem manager ignores the sniffer device. The 10-stsniffer.rules file, available in the ~/STMicroelectronics/STM32CubeMonitor-RF/sniffer directory can be copied in /etc/udev/rules.d.

انسٽال ڪريو  

  1. Launch the uninstaller.jar located in the installation directory /STMicroelectronics/STM32CubeMonitor-RF/Uninstaller. If the icon is not executable, edit its properties and select the option Allow executing file پروگرام جي طور تي.
  2. Select Force deletion… and click on the Uninstall button.

ميڪوس® 

انسٽال ڪريو

  1. STM32CMonRFMac.zip ڊائون لوڊ ڪريو.
  2. ان زپ ڪريو file هڪ عارضي جڳهه ڏانهن.
  3. Make sure you have access rights to the target installation directory.
  4. Double-click on the installer STM32CubeMonitor-RF.dmg file.
  5. Open the STM32CubeMonitor-RF new disk.
  6. Drag and drop the STM32CubeMonitor-RF shortcut to the Applications shortcut.
  7. Drag and drop the document folder to a location of your choice.

If an error with STM32CubeMonitor-RF an not be opened because it is from an unidentified developer occurs, the command sudo spctl –master-disable must be used to disable the verification.

انسٽال ڪريو

  1. In the applications folder, select the STM32CubeMonitor-RF icon and move it to trash.
  2. In the user’s home directory, remove the folder Library/STM32CubeMonitor-RF.

If the Library folder is hidden:

  • فائنر کوليو.
  • Hold down Alt (Option) and choose Go from the drop-down menu bar at the top of the screen.
  • The Library folder is listed below the Home folder.

STM32CubeMonitor-RF پاران سپورٽ ڪيل ڊوائيسز

سپورٽ ڊوائيسز
هن اوزار کي STM32WB55 نيوڪليو ۽ ڊونگل بورڊز (P-NUCLEO-WB55)، STM32WB15 نيوڪليو بورڊ (NUCLEO-WB15CC)، STM32WB5MM-DK ڊسڪوري ڪٽ، STM32WBA5x نيوڪليو بورڊ، STM32WBA6x نيوڪليو بورڊ، ۽ STM32WB0x نيوڪليو بورڊ سان آزمايو ويندو آهي.

The boards based on STM32WBxx are compatible if they feature:

  • A connection through a USB Virtual COM port or a serial link and
  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Thread_Cli_Cmd for Thread
    • Phy_802_15_4_Cli for 802.15.4 RF test
    • Mac_802_15_4_Sniffer.bin for sniffer

The boards based on STM32WBAxx are compatible if they feature: • A connection through a serial link and

  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • Thread_Cli_Cmd for Thread
    • Phy_802_15_4_Cli for 802.15.4 RF test
      The boards based on STM32WB0x are compatible if they feature:
  • A connection through a serial link and
  • A test firmware:
    • Transparent mode for Bluetooth® LE
    • ڊوائيس ڪنيڪشن جي تفصيل ۽ فرم ويئر جي جڳھ يوزر مينوئل STM2CubeMonitor-RF سافٽ ويئر ٽول فار وائرليس پرفارمنس ماپ (UM32) جي سيڪشن 2288 ۾ بيان ڪئي وئي آهي.

ڄاڻ جاري ڪريو

نيون خاصيتون / واڌايون

  • Alignment with STM32CubeWB firmware 1.23.0
  • Alignment with STM32CubeWBA firmware 1.7.0
  • Upgrade of Java® runtime version from 17.0.10 to 21.0.04
  • Upgrade of supported OpenThread version to 1.4.0 API 377
  • Support of command-line interface (CLI)

حل ٿيل مسئلا

هي رليز:

  • Fixes issue 64748 – Add a dialog to select the beacon file
  • Fixes issue 202582 – [802.15.4 Sniffer] Incorrect RSS report value
  • Fixes issue 204195 – Some ACI/HCI commands do not send 16-bit UUID parameter
  • Fixes issue 204302 – VS_HCI_C1_DEVICE_INFORMATION DBGMCU_ICODE typo – DBGMCU_ICODER for STM32WBA
  • Fixes issue 204560 – [STM32WB0] Transmission packet count is abnormal on PER test

پابنديون

  • When the device under test is disconnected, the software might not immediately detect the disconnection. In this case, an error is reported when a new command is sent. If the board is not detected after the error, it is necessary to unplug it and then reconnect it.
  • For sniffer on macOS®, the sniffer Python™ file ڪاپي کان پوءِ هڪ ايگزيڪيوٽوبل سان سيٽ ڪيو وڃي. ڪمانڊ آهي chmod+x stm32cubeMonRf_sniffer.py.
  • 32 کان اڳ جا STM1.16WB فرم ويئر ورجن سپورٽ نه آهن، هڪ وڌيڪ تازو ورجن گهربل آهي.
  • STM32WB0x Bluetooth® LE RF ٽيسٽ ۽ STM32WBAxx RX ٽيسٽ دوران، RSSI ماپ جا قدر مهيا نه ڪيا ويا آهن.
  • STM32WB05N لاءِ بيڪن ۽ ACI يوٽيلٽيز پينل ڪم نه ٿا ڪن.
  • STM32WBxx ۽ STM32WBAx ٻنهي لاءِ، Bluetooth® LE RX ۽ PER ٽيسٽن ۾، PHY ويليو 0x04 تجويز ڪيل آهي پر رسيور طرفان سپورٽ نه ڪئي وئي آهي. ان جي ڪري ڪو به وصول ٿيل پيڪٽ نه ٿو ٿئي.

لائسنس ڏيڻ
STM32CubeMonRF SLA0048 سافٽ ويئر لائسنس معاهدي ۽ ان جي اضافي لائسنس جي شرطن جي تحت پهچايو ويو آهي.

STM32CubeMonitor-RF رليز جي معلومات

STM32CubeMonitor-RF V1.5.0
Tool first version to support Bluetooth® Low Energy features of STM32WB55xx.
Versions 1.x.y have only Bluetooth® Low Energy support.

STM32CubeMonitor-RF V2.1.0
Addition of OpenThread support in the tool

STM32CubeMonitor-RF V2.2.0

  • Improvement of OpenThread command windows: Option to clear windows/history, details about OT commands selected in the tree
  • Addition of read param and set param buttons for OT commands used to read or set parameters
  • Addition of scripts for OpenThread
  • It is possible to add a loop in the script (refer to the user manual for details)
  • User interface update: the disabled items are now colored in gray
  • Implementation of search command for threads
  • Addition of the selection of Bluetooth® Low Energy PHY and modulation index
  • In Bluetooth® Low Energy RF tests, the frequency can be changed when the test is running

STM32CubeMonitor-RF V2.2.1

نيون خاصيتون / واڌايون
The OTA download procedure is updated: When the target device configuration is in OTA loader mode, the target address is incremented by one. STM32CubeMonitor-RF now uses the incremented address for the download.
The list of OpenThread commands is aligned with the Thread® stack.

STM32CubeMonitor-RF V2.3.0

نيون خاصيتون / واڌايون

  • Alignment with STM32WB55 cube firmware 1.0.0
  • Addition of 802.15.4 RF tests
  • New features in the ACI Utilities panel:
  • The discovery of remote Bluetooth® Low Energy devices
  • Interaction with the services of remote devices

STM32CubeMonitor-RF V2.4.0

نيون خاصيتون / واڌايون

  • Alignment with STM32WB cube firmware 1.1.1
  • Support the over-the-air firmware update of the wireless stack (FUOTA).
  • Optimize FUOTA connection parameters to increase performance. Adds a warning if the address is below 0x6000.
  • Correction of UART detection issue on Windows® 10
  • The tool properly uses the write without response function to write a characteristic with write without response permission.
  • Update the device name in the device information box.
  • Fix the value of HCI_LE_SET_EVENT_MASK.
  • Correction of the text about the error reason description
  • Fix issues with OpenThread scripts.
  • Set a maximum size for graphs.
  • Update some control locks to prevent wrong actions from the user.

STM32CubeMonitor-RF V2.5.0

نيون خاصيتون / واڌايون

  • Network Explorer is added to a new tab of Thread® mode.
  • This feature displays the connected Thread® devices and the connections between them.

STM32CubeMonitor–RF V2.6.0

نيون خاصيتون / واڌايون

RF tests are added.
In the transmitter test, the sending of MAC frames is available. The user defines the frame.
In the receiver test, the LQI, ED, and CCA tests are available and the PER test shows the decoded frames.

حل ٿيل مسئلا

هي رليز: 

  • Updates the C1_Read_Device_Information command description,
  • Disables the navigation link when the 802.15.4 receiver test is in progress,
  • Updates ST logo and colors,
  • Fixes the blank popup message displayed when the script detects an error,
  • Disables the start button as soon as the channel list is inconsistent in the 802.15.4 PER multichannel test,
  • And includes a workaround to prevent freeze observed on a serial port with macOS®.

STM32CubeMonitor-RF V2.7.0

نيون خاصيتون / واڌايون
اوپن ٿريڊ API کي ورجن 1.1.0 سان اپڊيٽ ڪري ٿو. اوپن ٿريڊ CoAP محفوظ API شامل ڪري ٿو. 802.15.4 سنيفر موڊ شامل ڪري ٿو.

حل ٿيل مسئلا

هي رليز:

  • Fixes the address bytes inverted in the OTA updater panel,
  • Fixes the OpenThread network explore button label management,
  • Fixes the behavior of the parameter field when the parameter is from the terminal and is wrong,
  • Fixes the naming of Bluetooth® Low Energy commands according to the AN5270 specification,
  • Fixes the connection fail behavior of the OpenThread COM port,
  • Fixes Bluetooth® Low Energy tester connection fail behavior on Linux®,
  • Fixes OpenThread panId hexadecimal value display,
  • Improve SBSFU OTA and tests,
  • Fixes ACI client characteristic configuration after reconnection.

STM32CubeMonitor-RF V2.7.1

نيون خاصيتون / واڌايون

Sniffer fixes.

حل ٿيل مسئلا

هي رليز:
Fixes the error on quick Wireshark sniffer stop then start.
Removes two extra bytes in sniffed data.

STM32CubeMonitor-RF V2.8.0

نيون خاصيتون / واڌايون

OTA improvement:

  • Adds an option in the OTA panel to increase the packet length (MTU) to optimize speed.
  • Adds a menu to select the target. It is required to compute the number of sectors to erase for SMT32WB15xx.
  • Removes the modulations not suitable for the PER test in the PER picklist.

حل ٿيل مسئلا

هي رليز:

  • Fixes issue 102779: Displaying offset and attribute data length is reversed for ACI_GATT_ATTRIBUTE_MODIFIED_EVENT.
  • Aligns the message HCI_ATT_EXCHANGE_MTU_RESP_EVENT with AN5270.
  • Fixes the attribute name in HCI_LE_DATA_LENGTH_CHANGE_EVENT.
  • Improves the welcome screen layout for small screens.

حل ٿيل مسئلا

هي رليز:

  • Fixes issue 64425: Send command button unlocked during OTA transfer.
  • Fixes issue 115533: During the OTA update, the issue in the
  • ACI_GAP_START_GENERAL_DISCOVERY_PROC command.
  • Fixes issue 115760:
  • During OTA updates, when the Optimize MTU size check box is ticked, the download stops after the MTU size exchange.
  • Fixes issue 117927: change address type to public device address for OTA.
  • Fixes issue 118377: wrong sector size erased before OTA transfer.
  • Set OTA block size according to MTU size exchange.

نيون خاصيتون / واڌايون

  • Adds compatibility with the OpenThread stack of STM32Cube_FW_V1.14.0. This stack is based on the OpenThread 1.2 stack and supports the O.T. 1.1 commands.
  • Adds new Bluetooth® Low Energy commands and events. Updates some existing commands to be compatible with the release 1.14.0 of the stack.

Commands added:

    • HCI_LE_READ_TRANSMIT_POWER,
    • HCI_LE_SET_PRIVACY_MODE,
    • ACI_GAP_ADD_DEVICES_TO_LIST,
    • HCI_LE_READ_RF_PATH_COMPENSATION,
    • HCI_LE_WRITE_RF_PATH_COMPENSATION
  • Events added:
    • HCI_LE_EXTENDED_ADVERTISING_REPORT_EVENT,
    • HCI_LE_SCAN_TIMEOUT_EVENT,
    • HCI_LE_ADVERTISING_SET_TERMINATED_EVENT,
    • HCI_LE_SCAN_REQUEST_RECEIVED_EVENT,
    • HCI_LE_CHANNEL_SELECTION_ALGORITHM_EVENT
  • Command removed:
    • ACI_GAP_START_NAME_DISCOVERY_PROC
  • Command updated (parameters or description):
    • ACI_HAL_GET_LINK_STATUS,
    • HCI_SET_CONTROLLER_TO_HOST_FLOW_CONTROL,
    • HCI_HOST_BUFFER_SIZE,
    • ACI_HAL_WRITE_CONFIG_DATA,
    • ACI_GAP_SET_LIMITED_DISCOVERABLE,
    • ACI_GAP_SET_DISCOVERABLE,
    • ACI_GAP_SET_DIRECT_CONNECTABLE,
    • ACI_GAP_INIT,
    • ACI_GAP_START_GENERAL_CONNECTION_ESTABLISH_PROC,
    • ACI_GAP_START_SELECTIVE_CONNECTION_ESTABLISH_PROC,
    • ACI_GAP_CREATE_CONNECTION,
    • ACI_GAP_SET_BROADCAST_MODE,
    • ACI_GAP_START_OBSERVATION_PROC,
    • ACI_GAP_GET_OOB_DATA,
    • ACI_GAP_SET_OOB_DATA,
    • ACI_GAP_ADD_DEVICES_TO_RESOLVING_LIST,
    • ACI_HAL_FW_ERROR_EVENT,
    • HCI_LE_READ_ADVERTISING_PHYSICAL_CHANNEL_TX_POWER,
    • HCI_LE_ENABLE_ENCRYPTION,
    • HCI_LE_LONG_TERM_KEY_REQUEST_NEGATIVE_REPLY,
    • HCI_LE_RECEIVER_TEST_V2,
    • HCI_LE_TRANSMITTER_TEST_V2,
    • ACI_HAL_WRITE_CONFIG_DATA,
    • ACI_GAP_SET_DIRECT_CONNECTABLE,
    • HCI_LE_SET_EVENT_MASK,
    • HCI_LE_TRANSMITTER_TEST

STM802.15.4WB32 Nucleo لاءِ 55 سنيفر فرم ويئر ۽ STM32WB55 USB ڊونگل لاءِ نئون فرم ويئر اپڊيٽ ڪيو ويو آهي.

حل ٿيل مسئلا

هي رليز:

  • Fixes issue 130999: Some packets are missed in the PER test.
  • Fixes issue 110073: Some panId values cannot be set in the Network Explorer tab.

STM32CubeMonitor-RF V2.9.1

نيون خاصيتون / واڌايون

  • Updates 802.15.4 sniffer firmware software.
  • Fixes some issues reported on version 2.9.0.
  • Fixes issue 131905: The Bluetooth® Low Energy TX LE PHY menu is not visible in RF tests.
  • Fixes issue 131913: The tools do not identify some Bluetooth® Low Energy versions.

پابنديون
STM32CubeMonitor-RF جو هي نسخو وڌايل اشتهاري حڪم فراهم نٿو ڪري. ڪجهه آپريشنز (FUOTA، ACI اسڪين) لاءِ، بلوٽوٿ® لو انرجي اسٽيڪ کي پراڻي اشتهارن سان استعمال ڪرڻ گهرجي. صارف دستي UM2288 جو حوالو ڏيو ته ڏسو ته ڪهڙو فرم ويئر استعمال ڪيو وڃي.

STM32CubeMonitor-RF V2.10.0

نيون خاصيتون / واڌايون

  • Alignment with STM32CubeWB firmware 1.15.0
  • OpenThread 1.3 support
  • Bluetooth® Low Energy extended advertising support
  • Bluetooth® Low Energy commands alignment with AN5270 Rev. 16
  • New Bluetooth® Low Energy RSSI acquisition method

حل ٿيل مسئلا

هي رليز:

  • Fixes issue 133389: A command with variable length crashes the tool.
  • Fixes issue 133695: Bluetooth® Low Energy missing
  • HCI_LE_TRANSMITTER_TEST_V2 PHY input parameter.
  • Fixes issue 134379: RF transmitter test, payload size is limited to 0x25.
  • Fixes issue 134013: Wrong text seen after launching and stopping tests by checking the Get RSSI box.

STM32CubeMonitor-RF V2.11.0

نيون خاصيتون / واڌايون

  • Support of STM32WBAxx devices except for OTA firmware update
  • Continuous wave mode in the 802.15.4 transmitter test (STM32CubeWB firmware 1.11.0 and later)
  • Availability to save Bluetooth® Low Energy ACI log information in a csv formatted file
  • Alignment with STM32CubeWB firmware 1.16.0
  • Alignment with STM32CubeWBA firmware 1.0.0
  • Update of 802.15.4 sniffer firmware
  • Removal of 802.15.4 RX_Start command before RX_get and Rs_get_CCA

حل ٿيل مسئلا
هي رليز:

  • Fixes issue 139468: Advertising test generates all advertising channels without being selected
  • Fixes issue 142721: Event with the length of the next param on more than 1 byte is not managed
  • Fixes issue 142814: Unable to set some command parameters with variable length
  • Fixes issue 141445: VS_HCI_C1_WRITE_REGISTER – ERROR found in script results
  • Fixes issue 143362: The tool gets blocked when setting the variable param length to 0

پابنديون

  • نئون مسئلو 139237: ACI پينل ۾، جڏهن اسڪين ٿيڻ کان اڳ اشتهار شروع ٿئي ٿو، ته اوزار اشتهارن جي آئڪن ۽ حالت کي صحيح طرح سان منظم نٿو ڪري.
  • ACI يوٽيلٽيز پينل ۾ نئون مسئلو: جيڪڏهن اشتهار شروع ٿي وڃن ته اسڪين شروع ڪرڻ ممڪن ناهي. ان کان اڳ اشتهار بند ڪرڻ گهرجن.

STM32CubeMonitor-RF V2.12.0

نيون خاصيتون / واڌايون

  • Alignment with STM32CubeWB firmware 1.17.0
  • Alignment with STM32CubeWBA firmware 1.1.0
  • Fix advertising issues using GAP commands instead of legacy
  • Add STM32WBA OTA firmware update support
  • Fix 802.15.4 sniffer issues around the Python™ script
  • Upgrade Java® runtime version from 8 to 17
  • Update missing Bluetooth® Low Energy parameters values and description

حل ٿيل مسئلا

هي رليز:

  • Fixes issues 149148 and 149147: 802.15.4 sniffer leading into negative timestamps on Wireshark
  • Fixes issue 150852: Bluetooth® Low Energy OTA profile application could not be discovered on STM32WBAxx
  • Fixes issue 150870: Missing parameters description in HTML wireless interface
  • Fixes issue 147338: Gatt_Evt_Mask parameter must be a bit mask
  • Fixes issue 147386: Missing ACI command to control antenna switching mechanism for AoA/AoD
  • Fixes issue 139237: Improve the advertising mechanism

STM32CubeMonitor-RF V2.13.0

نيون خاصيتون / واڌايون

  • Alignment with STM32CubeWB firmware 1.18.0
  • Alignment with STM32CubeWBA firmware 1.2.0
  • Add 802.15.4 support for STM32WBAxx devices
  • Add OpenThread support for STM32WBAxx devices

حل ٿيل مسئلا

هي رليز:

  • Fixes issue 161417: Combo Box not displayed on 802.15.4 Start TX
  • Fixes issue 159767: Replace the Twitter bird logo with the X logo
  • Fixes issue 152865: Transfer of firmware via OTA from WB55 device connected to STM32CubeMonitor-RF to device type WBA5x not active
  • Fixes issue 156240: Missing interval of parameter’s possible values in tool description
  • Fixes issue 95745 [802.15.4 RF]: No information displayed about the device ID connected
  • Fixes issue 164784: Error using online beacon with a random address
  • Fixes issues 163644 and 166039: Error using advertising with a random or public not connectable device address
  • Fixes issue 69229: Scanning cannot stop when advertising is running.

STM32CubeMonitor-RF V2.14.0

نيون خاصيتون / واڌايون

  • Alignment with STM32CubeWB firmware 1.19.0
  • Alignment with STM32CubeWBA firmware 1.3.0
  • Upgrade supported OpenThread version to 1.3.0 API 340

حل ٿيل مسئلا

هي رليز:

  • Fixes issues 165981 and 172847 to stabilize Linux® and macOS®, 802.15.4 sniffer behavior
  • Fixes issues 165552 and 166762 to improve scan and advertising features
  • Fixes issue 172471 to extend STM32WBA 802.15.4 power range

STM32CubeMonitor-RF V2.15.0

نيون خاصيتون / واڌايون

  • Alignment with STM32CubeWB firmware 1.20.0
  • Alignment with STM32CubeWBA firmware 1.4.0
  • Add support of STM32CubeWB0 firmware 1.0.0
  • Upgrade Java® runtime version from 17.0.2 to 17.0.10

حل ٿيل مسئلا

  • هي رليز:
  • Fixes issue 174238 – 802.15.4 sniffer malformed packet in Wireshark

STM32CubeMonitor-RF V2.15.1

نيون خاصيتون / واڌايون
Add support of STM32WB05N firmware 1.5.1

حل ٿيل مسئلا

هي رليز:

  • Fixes issue 185689: The first value of power in the ACI Utilities panel is not displayed for STM32WB or STM32WBA
  • Fixes issue 185753: Add STM32WB06 in STM32CubeMonitor-RF

نيون خاصيتون / واڌايون

  • Alignment with STM32CubeWB firmware 1.21.0
  • Alignment with STM32CubeWBA firmware 1.5.0
  • Alignment with STM32CubeWB0 firmware 1.1.0
  • Upgrade supported OpenThread stack to API 420 version 1.3.0
  • Update 802.15.4 sniffer firmware
  • Add STM32WB0X FUOTA support
  • Improve path management

حل ٿيل مسئلا

هي رليز:

  • Fixes issue 193557 – Vulnerability of commons-io
  • Fixes issue 190807 – FUOTA image base address management
  • Fixes issue 188490 – WBA PER test change to get RSSI
  • Fixes issue 191135 – Cannot connect to STM32WB15
  • Fixes issue 190091 – Connection to WB05N does not work the first time
  • Fixes issue 190126 – OpenThread, device information menu disabled
  • Fixes issue 188719 – Error in baud rate value
    3.23 STM32CubeMonitor-RF V2.17.0
    3.23.1 New features/enhancements
  • Alignment with STM32CubeWB firmware 1.22.0
  • Alignment with STM32CubeWBA firmware 1.6.0
  • Alignment with STM32CubeWB0 firmware 1.2.0
  • Support of STM32WBA6x devices

حل ٿيل مسئلا

هي رليز:

  • Fixes issue 185894 – Support STM32WB1x BLE_Stack_light_fw upgrade
  • Fixes issue 195370 – ACI_GAP_SET_NON_DISCOVERABLE return Command disallowed error
  • Fixes issue 196631 – Could not perform RF Tests on WB05X

نظرثاني جي تاريخ

جدول 2. دستاويز جي نظرثاني جي تاريخ

تاريخ نظرثاني تبديليون
02-مارچ-2017 1 شروعاتي ڇڏڻ.
  25-اپريل-2017   2 Modified for release 1.2.0:–  updated Section 2: Release information–  updated Section 2.3: Restrictions–  added Section 3.2: STM32CubeMonitor-RF V1.2.0 information
   27-جون-2017    3 Changed document classification to ST Restricted.Modified for release 1.3.0, hence updated document title and addedSection 3.3: STM32CubeMonitor-RF V1.3.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3: Setup procedure, ڊوائيس جي تشڪيل, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions ۽ Section 3.2: STM32CubeMonitor-RF V1.2.0 information.
    29-سيپٽمبر-2017     4 رليز 1.4.0 لاءِ تبديل ڪيو ويو، تنهن ڪري دستاويز جو عنوان اپڊيٽ ڪيو ويو ۽ شامل ڪيو ويوSection 3.4: STM32CubeMonitor-RF V1.4.0 information.Updated سيڪشن 1.1: ختمview, Section 1.2: Host PC system requirements, Section 1.3.1: Windows, Section 1.4: Devices supported by STM32CubeMonitor-RF, Section 2.1: New features/enhancements, Section 2.2: Fixed issues ۽ Section 2.3: Restrictions.Added Section 1.3.2: Linux®, Section 1.3.3: macOS®، ۽ Section 2.4: Licensing.Updated Table 1: STM32CubeMonitor-RF 1.4.0 release summary.
   29-جنوري-2018    5 رليز 1.5.0 لاءِ تبديل ڪيو ويو، تنهن ڪري دستاويز جو عنوان اپڊيٽ ڪيو ويو ۽ شامل ڪيو ويوSection 3.5: STM32CubeMonitor-RF V1.5.0 information.Updated Section 1.2: Host PC system requirements, Section 1.3.2: Linux®, ڊوائيس جي تشڪيل, Section 2.1: New features/enhancements, Section 2.2: Fixed issues ۽ Section 2.3: Restrictions.Updated Table 1: STM32CubeMonitor-RF 1.5.0 release summary ۽Table 2: List of licenses.
   14-مئي-2018    6 رليز 2.1.0 لاءِ تبديل ڪيو ويو، تنهن ڪري دستاويز جو عنوان اپڊيٽ ڪيو ويو ۽ شامل ڪيو ويوSection 3.6: STM32CubeMonitor-RF V2.1.0 information.Updated سيڪشن 1.1: ختمview, Section 1.2: Host PC system requirements, Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.3: Restrictions.تازه ڪاري Table 1: STM32CubeMonitor-RF 2.1.0 release summary ۽Table 2: List of licenses.
   24-آگسٽ-2018    7 رليز 2.2.0 لاءِ تبديل ڪيو ويو، تنهن ڪري دستاويز جو عنوان اپڊيٽ ڪيو ويو ۽ شامل ڪيو ويوSection 3.7: STM32CubeMonitor-RF V2.2.0 information.Updated Section 2.1: New features/enhancements, Section 2.2: Fixed issues, Section 2.2: Restrictions.Updated Table 1: STM32CubeMonitor-RF 2.3.0 release summary ۽Table 2: List of licenses.
تاريخ نظرثاني تبديليون
   15-آڪٽوبر-2018    8 رليز 2.2.1 لاءِ تبديل ڪيو ويو، تنهن ڪري دستاويز جو عنوان اپڊيٽ ڪيو ويو ۽ شامل ڪيو ويوSection 3.8: STM32CubeMonitor-RF V2.2.1 information.Updated سيڪشن 1.1: ختمview, Section 1.3.2: Linux®, Section 1.3.3: macOS®, Section 2.1: New features/enhancements, ۽ Section 2.2: Restrictions.Removed former Section 2.2: Fixed issues.
  15-فيبروري-2019   9 Updated:–  Title, ٽيبل 1، ۽ سيڪشن 2 switch to the 2.3.0 release–  سيڪشن 3 former releases history–  سيڪشن 1.1: ختمview to add OpenThread and 802.15.4 RF–  Section 1.3: Setup procedure with different OS
  12-جولائي-2019   10 Updated:–  Title, ٽيبل 1، ۽ سيڪشن 2 switch to the 2.4.0 release–  ٽيبل 2 jSerialComm version–  سيڪشن 3 former releases history
  03-اپريل-2020   11 Updated:–  Title, ٽيبل 1، ۽ سيڪشن 2 switch to the 2.5.0 release–  ٽيبل 2 Inno setup version–  سيڪشن 3 former releases history
  13-نومبر-2020   12 Updated:–  Title, ٽيبل 1، ۽ سيڪشن 2 switch to the 2.6.0 release–  ٽيبل 2 ۽ ٽيبل 3 details in an added copyright column–  سيڪشن 3 former releases history
  08-فيبروري-2021   13 Updated:–  Title, ٽيبل 1, سيڪشن 1، ۽ سيڪشن 2 switch to the 2.7.0 release with new802.15.4 sniffer mode and هوسٽ پي سي سسٽم گهرجون–  ٽيبل 3 Java SE and Java FX version–  سيڪشن 3 former releases history
  08-جون-2021   14 Updated:–  Title, ٽيبل 1، ۽ سيڪشن 2 switch to the 2.7.1 release with 802.15.4 sniffer fixes–  سيڪشن 3 former releases history
    15-جولائي-2021     15 Updated:–  Title, ٽيبل 1، ۽ سيڪشن 2 switch to the 2.8.0 release with OTA speed improvement and new OTA option for STM32WB15xx–  سيڪشن 1.4 NUCLEO-WB15CC support and test firmware explanation–  ٽيبل 2 with SLA0048 in لائسنس ڏيڻ–  ٽيبل 3 with Inno setup version–  سيڪشن 3 former releases history
  21-ڊسمبر-2021   16 Updated:–  Title, ٽيبل 1، ۽ سيڪشن 2.1 switch to the 2.8.1 release with fixes for Bluetooth® Low Energy OTA–  سيڪشن 3 former releases history
تاريخ نظرثاني تبديليون
07-جولائي-2022 17 اپڊيٽ ٿيل:
  • عنوان، ٽيبل 1، ۽ سيڪشن 2.1 switch to the 2.9.0 release
  • Python™ card version in سافٽ ويئر گهرجون
  • Section 2.4: Licensing replacing tables with the suitable license agreement statement
  • سيڪشن 3 former releases history
14-سيپٽمبر-2022 18 اپڊيٽ ٿيل:
  • عنوان، ٽيبل 1، ۽ سيڪشن 2 switch to the 2.9.1 release
  • Java FX-GTK3 conflict moved from پابنديون to Linux® انسٽال ڪريو
  • سيڪشن 3 former releases history
29-نومبر-2022 19 اپڊيٽ ٿيل:
  • عنوان، ٽيبل 1، ۽ سيڪشن 2 switch to the 2.10.0 release
  • Removed note on fixed GTK2 issue in Linux® انسٽال ڪريو
  • سيڪشن 3 former releases history
03-مارچ-2023 20 اپڊيٽ ٿيل:
  • عنوان، ٽيبل 1، ۽ سيڪشن 2 switch to the 2.11.0 release
  • سيڪشن 3 former releases history
4-جولائي-2023 21 اپڊيٽ ٿيل:

عنوان، ٽيبل 1، ۽ سيڪشن 2 switch to the 2.12.0 release
سيڪشن 3 former releases history
23-نومبر-2023 22 اپڊيٽ ٿيل:

عنوان، ٽيبل 1، ۽ سيڪشن 2 switch to the 2.13.0 release

سيڪشن 3 former releases history
14-مارچ-2024 23 اپڊيٽ ٿيل:
  • عنوان، ٽيبل 1، ۽ سيڪشن 2 switch to the 2.14.0 release
  • macOS® versions in سپورٽ ٿيل آپريٽنگ سسٽم ۽ آرڪيٽيڪچر
  • سيڪشن 3 former releases history
01-جولائي-2024 24 اپڊيٽ ٿيل:
  • عنوان، ٽيبل 1، ۽ سيڪشن 2 switch to the 2.15.0 release
  • Nucleo boards in STM32CubeMonitor-RF پاران سپورٽ ڪيل ڊوائيسز
  • سيڪشن 3 former releases history
12-سيپٽمبر-2024 25 اپڊيٽ ٿيل:
عنوان، ٽيبل 1، ۽ حصو 2 ، سميت پابنديون, switch to the 2.15.1 releaseسيڪشن 3 former releases history
22-نومبر-2024 26 اپڊيٽ ٿيل:
  • عنوان، ٽيبل 1، ۽ حصو 2 ، سميت پابنديون, switch to the 2.16.0 release
  • Linux® and macOS® versions in سپورٽ ٿيل آپريٽنگ سسٽم ۽ آرڪيٽيڪچر
  • سيڪشن 3 former releases history
تاريخ نظرثاني تبديليون
 18-فيبروري-2025  27 اپڊيٽ ٿيل:
عنوان، ٽيبل 1, Section 1.4, Section 2.1, Section 2, سميت
پابنديون, switch to the 2.17.0 release
سيڪشن 3 former releases history
23-جون-2025 28 اپڊيٽ ٿيل:

عنوان، ٽيبل 1, سيڪشن 2, سميت پابنديون, switch to the 2.18.0 release

سيڪشن 3 former releases history

اهم نوٽيس - غور سان پڙهو

  • STMicroelectronics NV ۽ ان جا ماتحت ادارا (“ST”) ST پروڊڪٽس ۽/يا هن دستاويز ۾ بغير اطلاع جي ڪنهن به وقت تبديليون، سڌارا، واڌايون، ترميمون ۽ سڌارا ڪرڻ جو حق محفوظ رکن ٿا. خريد ڪندڙن کي آرڊر ڏيڻ کان پهريان ST شين تي تازي لاڳاپيل معلومات حاصل ڪرڻ گهرجي. ايس ٽي پروڊڪٽس وڪرو ڪيا وڃن ٿا ايس ٽي جي شرطن ۽ وڪري جي شرطن جي مطابق آرڊر جي اقرار جي وقت تي.
  • خريدار مڪمل طور تي ST پروڊڪٽس جي چونڊ، چونڊ ۽ استعمال جا ذميوار آهن ۽ ST درخواست جي مدد يا خريد ڪندڙن جي پروڊڪٽس جي ڊيزائن لاءِ ڪا به ذميواري قبول نه ڪندو آهي.
  • ڪو به لائسنس، ظاهر يا تقاضا، ڪنهن به دانشورانه ملڪيت جو حق ST پاران ڏنل ناهي.
  • ايس ٽي پروڊڪٽس جو ريزيل شقن سان مختلف معلومات ھتي بيان ڪيل معلومات کان مختلف آھي ايس ٽي پاران ڏنل ڪنھن به وارنٽي کي رد ڪندي اھڙي پراڊڪٽ لاءِ.
  • ST ۽ ST لوگو ST جا ٽريڊ مارڪ آھن. ST ٽريڊ مارڪ بابت اضافي معلومات لاءِ، ڏسو www.st.com/trademarks  ٻيون سڀ پراڊڪٽ يا سروس جا نالا سندن متعلق مالڪن جي ملڪيت آهن.
  • هن دستاويز ۾ معلومات هن دستاويز جي ڪنهن به اڳوڻي نسخن ۾ اڳ ۾ فراهم ڪيل معلومات کي ختم ڪري ٿو ۽ تبديل ڪري ٿو.
  • © 2025 STMicroelectronics – سڀ حق محفوظ آهن

دستاويز / وسيلا

STMicroelectronics RN0104 STM32 ڪيوب مانيٽر آر ايف [pdf] استعمال ڪندڙ ھدايت
RN0104 STM32 ڪيوب مانيٽر RF، RN0104، STM32 ڪيوب مانيٽر RF، ڪيوب مانيٽر RF، مانيٽر RF

حوالو

تبصرو ڇڏي ڏيو

توهان جو اي ميل پتو شايع نه ڪيو ويندو. گهربل فيلڊ نشان لڳل آهن *