NXP UM11931 MCU-Link Base Standalone Debug Probe
Ulwazi ngeMveliso:
- Igama lemveliso: I-MCU-Link Base Standalone Debug Probe
- Umenzi: NXP Semiconductors
- Inombolo yoMfanekiso: UM11931
- Inguqulelo: Rev. 1.0 - April 10, 2023
- Amagama angundoqo: I-MCU-Link, i-Debug probe, i-CMSIS-DAP
- Inkcazo: Incwadi yomsebenzisi ye-MCU-Link Base ezimeleyo yokulungisa ingxaki
Imiyalelo yokusetyenziswa kwemveliso:
Intshayelelo
I-MCU-Link Base Standalone Debug Probe sisixhobo esisebenza ngeendlela ezininzi esivumela ukulungisa ingxaki kunye nophuhliso lwekhowudi yokuhlola yokulungisa isiko. Ibandakanya iimpawu ezahlukeneyo kunye nojongano lokudibanisa ngokungenamthungo kunye neenkqubo ekujoliswe kuzo.
Uyilo lwebhodi kunye nezicwangciso
Iziqhagamshelo kunye neejumpi kwi-MCU-Link zimi ngolu hlobo lulandelayo:
| Isetyhula | Inkcazo |
|---|---|
| I-LED1 | Imeko ye-LED |
| J1 | Isidibanisi se-USB samamkeli |
| J2 | I-LPC55S69 SWD isidibanisi (sophuhliso lweprobe yokulungisa isiko ikhowudi kuphela) |
| J3 | Ijumpi yohlaziyo lweFirmware (faka kwaye uphinde unike amandla ukuhlaziya firmware) |
| J4 | I-VCOM khubaza i-jumper (fakela ukucisha) |
| J5 | I-SWD khubaza i-jumper (fakela ukuyekisa) |
| J6 | Isidibanisi se-SWD sokudibanisa kwinkqubo ekujoliswe kuyo |
| J7 | Uqhagamshelo lweVCOM |
| J8 | Isidibanisi sokwandiswa kwedijithali I-Pin 1: Igalelo le-analog Izikhonkwane 2-4: Zigciniwe |
Ufakelo kunye nokhetho lwe-firmware
I-MCU-Link debug probe iza ne-NXP's CMSIS-DAP protocol esekwe kwi-firmware efakwe ngaphambili, exhasa zonke iimpawu zehardware. Nangona kunjalo, nceda uqaphele ukuba le modeli ethile ye-MCU-Link ayixhasi i-J-Link firmware esuka kwi-SEGGER.
Ukuba ibhodi yakho ayinawo umfanekiso we-firmware we-debug probe efakiweyo, akukho nanye yee-LEDs iya kukhanya xa ibhodi iqhagamshelwe kwikhompyuter yokusingatha. Kwiimeko ezinjalo, unokuhlaziya i-firmware yebhodi ngokulandela imiyalelo ekwiCandelo 3.2 ngezantsi.
Umqhubi wokusingatha kunye nofakelo oluluncedo
Ukufakela abaqhubi abayimfuneko kunye nezinto eziluncedo ze-MCU-Link, nceda ubhekisele kwisikhokelo sofakelo senyathelo-ngenyathelo elinikezelweyo kwibhodi. webiphepha kwi-nxp.com: https://www.nxp.com/demoboard/MCU-LINK.
Kungenjalo, unokusebenzisa i-Linkserver eluncedo ekhoyo https://nxp.com/linkserver efakela abaqhubi abafunekayo kunye ne-firmware ngokuzenzekelayo.
Ulwazi loxwebhu
| Ulwazi | Umxholo |
| Amagama angundoqo | I-MCU-Link, i-Debug probe, i-CMSIS-DAP |
| Abstract | Incwadi yomsebenzisi ye-MCU-Link Base ezimeleyo yokulungisa ingxaki |
Imbali yohlaziyo
| Umfundisi | Umhla | Inkcazo |
| 1.0 | 20220410 | Ukukhutshwa kokuqala. |
Iinkcukacha zoqhakamshelwano
Ngolwazi oluthe vetshe, nceda undwendwele: http://www.nxp.com
Ngeedilesi zeofisi yentengiso, nceda uthumele i-imeyile ku: salesaddresses@nxp.com
Intshayelelo
Iphuhliswe ngokudibeneyo yi-NXP kunye ne-Embedded Artists, i-MCU-Link i-debug probe enamandla kunye neendleko ezisebenzayo ezinokuthi zisetyenziswe ngaphandle komthungo kunye ne-MCUXpresso IDE, kwaye iyahambelana nee-IDE ze-3 ezixhasa i-protocol ye-CMSIS-DAP. I-MCU-Link ibandakanya izinto ezininzi zokuququzelela uphuhliso lwesoftware oluzinzisiweyo, ukusuka kwi-debug ukuya kwiprofayili kunye ne-UART ukuya kwibhulorho ye-USB (VCOM). I-MCU-Link yenye yoluhlu lwezisombululo zolungiso lweempazamo ezisekwe kuyilo lwe-MCU-Link, ekwaquka imodeli yePro kunye nomiliselo olwakhelwe kwiibhodi zovavanyo ze-NXP (bona https://nxp.com/mculink ngolwazi oluthe vetshe). Izisombululo ze-MCU-Link zisekelwe kwi-microcontroller enamandla, ephantsi ye-LPC55S69 kwaye zonke iinguqulelo ziqhuba i-firmware efanayo kwi-NXP.
Umzobo 1 Uyilo lwe-MCU-Link kunye noqhagamshelo
I-MCU-Link ibandakanya iimpawu ezilandelayo
- I-firmware ye-CMSIS-DAP yokuxhasa zonke ii-MCU ezisekelwe kwi-NXP Arm® Cortex®-M ezine-SWD debug interfaces
- Isantya esiphezulu se-USB host interface
- I-USB ekujoliswe kuyo kwibhulorho ye-UART (VCOM)
- Iprofayili ye-SWO kunye neempawu ze-I/O
- CMSIS-SWO inkxaso
- Igalelo lojongo lwesignali ye-analog
Uyilo lwebhodi kunye nezicwangciso
Izixhumi kunye ne-jumpers kwi-MCU-Link ziboniswe kuMfanekiso 1 kwaye iinkcazo zezi ziboniswe kwiThebhile 1.
Itheyibhile 1 Izalathisi, iijumpi, amaqhosha kunye nezihlanganisi
| Isetyhula | Inkcazo | Ukuhlala kukho |
| I-LED1 | Imeko ye-LED | n / A |
| J1 | Isidibanisi se-USB samamkeli | n / A |
| J2 | I-LPC55S69 SWD isidibanisi (sophuhliso lwekhowudi yophendlo lwesiko kuphela) | Ayifakwanga |
| J3 | Ijumpi yohlaziyo lweFirmware (faka kwaye uphinde unike amandla ukuhlaziya ifirmware) | Vula |
| J4 | I-VCOM khubaza i-jumper (fakela ukucisha) | Vula |
| J5 | I-SWD khubaza i-jumper (fakela ukuyekisa) | Vula |
| J6 | Isidibanisi se-SWD sokudibanisa kwinkqubo ekujoliswe kuyo | n / A |
| J7 | Uqhagamshelo lweVCOM | n / A |
| J8 | Isidibanisi sokwandiswa kweDijithali I-Pin 1: Igalelo le-Analog
Izikhonkwane 2-4: Zigciniwe |
Ayifakwanga |
Ufakelo kunye nokhetho lwe-firmware
Iiprobe ze-MCU-Link debug zicwangciswe nge-NXP's CMSIS-DAP iprotocol esekwe kwi-firmware, ekwaxhasa zonke ezinye izinto ezixhaswayo kwihardware. (Qaphela ukuba le modeli ye-MCU-Link ayinakuqhuba uguqulelo lwe-J-Link firmware esuka kwi-SEGGER ekhoyo kwezinye izinto ezisetyenziswayo ze-MCU-Link.)
Ezinye iiyunithi zemveliso zakwangoko zisenokungabinawo umfanekiso we-firmware wokulungisa ingxaki ofakiweyo. Ukuba oku kunjalo akukho nanye yee-LED eziya kukhanya xa ibhodi iqhagamshelwe kwikhompyuter yokusingatha. Kule meko i-firmware yebhodi isenokuhlaziywa ngokulandela imiyalelo ekwiCandelo 3.2 ngezantsi.
Umqhubi wokusingatha kunye nofakelo oluluncedo
Isikhokelo sokufakela inyathelo ngenyathelo le-MCU-Link sinikezelwa ebhodini web iphepha kwi nxp.com (https://www.nxp.com/demoboard/MCU-LINKInxalenye yeli candelo ichaza amanyathelo afanayo anokufunyanwa kwelo phepha.
I-MCU-Link ngoku ikwaxhaswa yi-Linkserver eluncedo (https://nxp.com/linkserver), kunye nokusebenzisa i-installer ye-Linkserver iya kufaka kwakhona bonke abaqhubi abafunekayo kunye nezixhobo zohlaziyo lwe-firmware ezikhankanywe kwintsalela yeli candelo. Kunconywa ukuba le installer isetyenziswe ngaphandle kokuba usebenzisa i-MCUXpresso IDE version ye-11.6.1 okanye ngaphezulu. Nceda ujonge ukuhambelana kwe-MCUXpresso IDE (jonga iTheyibhile 2) ngaphambi kokuhlaziya i-firmware ye-MCU-Link.
I-MCU-Link debug probes iyaxhaswa Windows 10, iMacOS X kunye namaqonga e-Ubuntu Linux. Iiprobes ze-MCU-Link zisebenzisa abaqhubi be-OS abaqhelekileyo kodwa inkqubo yofakelo yeWindows ibandakanya ulwazi files ukunika umsebenzisi amagama isixhobo esinobubele. Ukuba awufuni ukusebenzisa iphakheji yokufaka i-Linkserver ungayifaka ezi nkcukacha files kunye ne-firmware ye-MCU-Link yohlaziyo oluluncedo, ngokuya kwicandelo loYilo lweMithombo yebhodi web iphepha kwaye ukhethe "isoftware yoPhuhliso" kwicandelo leSOFTWARE. Iipakethe zokufakela ze-OS nganye yomkhosi ziya kuboniswa. Khuphela ipakethe yofakelo lwakho lwe-OS (iLinux okanye iMacOS) okanye usebenzise isifakeli (Windows). Emva kokuseta abaqhubi be-OS, ikhompyuter yakho yokusingatha iya kuba ilungele ukusetyenziswa kunye ne-MCU-Link. Ngokuqhelekileyo kuyacetyiswa ukuba uhlaziywe kwinguqu yamva nje ye-firmware njengoko oku kunokuba kutshintshile ukususela ekubeni i-MCU-Link yakho yenziwe kodwa kuqala khangela iThebhile 2 ukuqinisekisa ukuhambelana ne-MCUXpresso IDE version oyisebenzisayo. Jonga iCandelo 3.2 ngamanyathelo okwenza uhlaziyo lwe-firmware.
Ukuhlaziya i-MCU-Link firmware
Ukuhlaziya i-firmware ye-MCU-Link kufuneka inikwe amandla kwi-(USB) imo ye-ISP. Ukwenza oku faka i-jumper J4 emva koko uqhagamshele i-MCU-Link kwikhompyuter yakho yokwamkela usebenzisa intambo ye-USB encinci ye-B eqhagamshelwe kwi-J1. I-LED STATUS ebomvu (i-LED3) kufuneka ilayite kwaye ihlale (ukufumana ulwazi oluthe xhaxhe malunga nolwazi lobume be-LED bhekisa kwiCandelo 4.7. Ibhodi iya kubala kwikhompyuter yehostele njengesixhobo seklasi ye-HID. Hamba uye kwi-MCU-
LINK_isifakeli_Vx_xxx uvimba weefayili (apho i-Vx_xxx ibonisa inombolo yoguqulelo, umz. V3.108), emva koko ulandele imiyalelo yofakelo kwi-readme.txt ukufumana nokusebenzisa izixhobo zohlaziyo lwe-firmware ye-CMSIS-DAP. Emva kokuhlaziya i-firmware usebenzisa enye yale mibhalo, khupha ibhodi kwikhompyutheni yokusingatha, susa i-J4 uze uphinde udibanise ibhodi.
PHAWULA: Ukususela kwinguqulo ye-V3.xxx ukuya phambili, i-firmware ye-MCU-Link isebenzisa i-WinUSB endaweni ye-HID yokusebenza okuphezulu, kodwa oku akuhambelani nenguqulo yangaphambili ye-MCUXpresso IDE. Inkxaso ye-CMSIS-SWO iya kuqaliswa kwakhona ukusuka kwi-V3.117, eyenza iimpawu ezinxulumene ne-SWO kwii-IDE ezingekho ze-NXP, kodwa zifuna i-IDE ehlaziyiweyo. Nceda ujonge le theyibhile ingezantsi ukuhambelana phakathi kwenguqulelo ye-MCU-Link firmware kunye ne-MCUXpresso IDE. Ukukhutshwa kokugqibela kwe-V2.xxx firmware (2.263) kufumaneka ku-https://nxp.com/mcu-link kubaphuhlisi abasebenzisa iinguqulelo ze-IDE ezindala.
Itheyibhile ye-2 iimpawu zeFirmware kunye ne-MCUXpresso IDE ehambelanayo
| Uguqulelo lwe-firmware ye-MCU-Link | i-USB
uhlobo lomqhubi |
CMSIS- SWO
inkxaso |
LIBUSSIO | Iinguqulelo ze-MCUXpresso IDE ezixhaswayo |
| V1.xxx kunye V2.xxx | ZIFIHLILE | Hayi | Ewe | MCUXpresso 11.3 ukuya phambili |
| V3.xxx phezulu kwaye kuquka V3.108 | WinUSB | Hayi | Hayi | MCUXpresso 11.7 ukuya phambili IYAFUNEKA |
| V3.117 ukuya phambili | WinUSB | Ewe | Hayi | MCUXpresso 11.7.1 okanye kamva IYAFUNEKA |
Emva kokwenza inkqubo ye-MCU-Link kunye ne-firmware ye-CMSIS-DAP, isixhobo sebhasi ye-USB kunye ne-virtual com port iya kubala, njengoko kubonisiwe ngezantsi (kwi-Windows host hosts):
Umfanekiso we-2 MCU-Link izixhobo ze-USB (ukusuka kwi-V3.xxx firmware, i-VCOM port inikwe amandla)
Ukuba usebenzisa i-firmware V2.xxx okanye ngaphambili uya kubona isixhobo se-MCU-Link CMSIS-DAP phantsi kwezixhobo ze-HIB ze-USB kunezixhobo ze-Universal Serial Bus.
Isimo se-LED siya kuphelelwa ngokuphindaphindiweyo ukusuka kwi-off and off and back on again ("ukuphefumula").
Ukuba inguqulelo ye-firmware yamva nje kuneyo icwangciswe kwi-MCU-Link yakho iyafumaneka, i-MCUXpresso IDE (ukusuka kwinguqulo ye-11.3 ukuya phambili) iya kukwazisa koku xa usebenzisa i-probe kwiseshoni yolungiso lweempazamo; thatha ngononophelo inguqulelo ye firmware oyifakayo ukuqinisekisa ukuba iyahambelana noguqulelo lwe IDE oyisebenzisayo. Ukuba usebenzisa enye i-IDE kunye ne-MCU-Link kuyacetyiswa ukuba uhlaziye i-firmware ukuqinisekisa ukuba i-firmware yamva nje ifakiwe.
Ukucwangcisa ukusetyenziswa kunye nezixhobo zophuhliso
I-MCU-Link debug probe ingasetyenziswa kunye nee-IDE ezixhaswayo ngaphakathi kwe-MCUXpresso ecosystem (MCUXpresso IDE, IAR Embedded Workbench, Keil MDK, MCUXpresso ye-Visual Studio Code (ukususela ngoJulayi 2023)); ngolwazi oluthe kratya malunga nokuqalisa ngezi IDE nceda undwendwele i Ukuqalisa icandelo le MCU-Link ibhodi iphepha kwi nxp.com.
Sebenzisa nge-MCUXpresso IDE
I-MCUXpresso IDE iyakuqaphela naluphi na uhlobo lwe-MCU-Link kwaye iya kubonisa iindidi zophando kunye nezichongi ezizodwa zazo zonke iiprobe ezizifumanayo kwincoko yababini yokufumanisa xa iqala iseshoni yolungiso. Le ncoko yababini iya kubonisa kwakhona inguqulo ye-firmware, kwaye iya kubonisa isilumkiso ukuba i-firmware ayiyona inguqulelo yamva nje. Jonga iCandelo 3.2 ngolwazi malunga nendlela yokuhlaziya i-firmware. I-MCUXpresso IDE 11.3 okanye kamva kufuneka isetyenziswe xa usebenzisa i-MCU-Link.
Sebenzisa kunye nezinye ii-IDE
I-MCU-Link kufuneka ithathelwe ingqalelo njenge-CMSIS-DAP probe ngezinye ii-IDE (kuxhomekeke kwi-firmware ecwangcisiweyo), kwaye kufuneka isebenziseke ngemimiselo esemgangathweni yolo hlobo lophando. Landela imiyalelo yomthengisi we-IDE yokuseta kunye nokusetyenziswa kwe-CMSIS-DAP.
Iinkcazo zeempawu
Eli candelo lichaza iimpawu ezahlukeneyo ze-MCU-Link.
Ujoliso lwe-SWD/SWO ujongano
I-MCU-Link ibonelela ngenkxaso ye-SWD-based debug debug, kubandakanywa iimpawu ezenziwe yi-SWO. I-MCU-Link iza noqhagamshelo olujoliswe kwintambo nge-J2, i-10-pin Cortex M isidibanisi.
Iziguquli zenqanaba zibonelelwa phakathi kwe-LPC55S69 MCU-Link processor kunye nokujoliswe kuko ukwenza iiprosesa ezijoliswe kuzo ezisebenza phakathi kwe-1.2V kunye ne-5V zilungiswe. Umqulu wereferensitagIsekethe yokulandela umkhondo isetyenziselwa ukufumanisa i-voltage ekujoliswe kuyotage kwisidibanisi se-SWD kwaye usete inqanaba le-shifter target-side voltage ngokufanelekileyo (jonga iphepha lesiyilo 4.)
I-interface ye-SWD ekujoliswe kuyo inokukhutshazwa yi-jumper efakiweyo ye-J13 kodwa qaphela ukuba isoftware ye-MCU-Link ijonga kuphela le jumper ngexesha lokuqalisa.
QAPHELA: I-MCU-Link inokuphinda inikwe amandla ekujoliswe kuyo ukuba i-MCU-Link ngokwayo ayiqhutywanga nge-USB. Ngesi sizathu kucetyiswa ukuba amandla asetyenziswe kwi-MCU-Link phambi kokujoliswe kuko.
I-VCOM (i-USB ukuya kwibhulorho ye-UART ekuJoliswe kuyo)
I-MCU-Link ibandakanya i-UART ukuya kwibhulorho ye-USB (VCOM). Inkqubo ekujoliswe kuyo i-UART inokudityaniswa kwi-MCU-Link nge-Connector J7 usebenzisa intambo enikezelweyo. I-Pin 1 ye-J7 kufuneka ixhunywe kwi-TXD yesiphumo seThagethi, kunye ne-2 ye-XNUMX kwigalelo le-RXD yeThagethi.
Isixhobo se-MCU-Link VCOM siya kubalwa kwisistim yekhompyuter enegama elithi MCU-Link Vcom Port (COMxx) apho u-“xx” uya kuba ngumntu oxhomekeke kwisistim yokusingatha. Ibhodi nganye ye-MCU-Link iya kuba nenombolo eyodwa ye-VCOM ehambelana nayo. Umsebenzi we-VCOM unokucinywa ngokufaka i-jumper J7 phambi kokunika amandla ibhodi. Qaphela ukuba ukufaka / ukususa le jumper emva kokunika amandla ibhodi akuyi kuba nefuthe kwinqaku ngokwendlela isoftware ye-MCU-Link eziphatha ngayo kuba ijongiwe kuphela kumandla aphezulu. Akuyomfuneko ukukhubaza umsebenzi we-VCOM xa ungasetyenziswa, nangona oku kunokugcina i-USB bandwidth.
Isixhobo se-VCOM siqwalaselwe ngokusebenzisa ikhompyutha engumamkeli (umzekelo uMphathi weSixhobo kwiWindows), ngezi pharamitha zilandelayo:
- Ubude begama 7 okanye 8 bits
- Misa amasuntswana: 1 okanye 2
- I-Parity: ayikho / ayiqhelekanga / ilinganayo
Amazinga e-Baud ukuya kuthi ga kwi-5.33Mbps axhaswa.
I-analog probe
I-MCU-Link ibandakanya igalelo lesignali ye-analog enokusetyenziswa kunye ne-MCUXpresso IDE ukubonelela ngesiseko sophawu lokulandelela uphawu. Njengakwinguqulo ye-11.4 ye-MCUXpresso IDE eli nqaku libandakanyiwe kunye neengxoxo zokulinganisa amandla.
Igalelo le-analog yolu phawu lubekwe kwi-pin 1 yesiqhagamshelanisi i-J8. Igalelo lidlula ngokuthe ngqo kwigalelo le-ADC ye-LPC55S69; Jonga kwidatha yedatha ye-LPC55S69 yongeniso lwegalelo kunye nezinye iimpawu. Kufuneka kuthathelwe ingqalelo ukuba ungasebenzisi umqulutages > 3.3V kweli galelo ukuze uthintele umonakalo.
LPC55S69 debug isidibanisi
Uninzi lwabasebenzisi be-MCU-Link kulindeleke ukuba basebenzise i-firmware esemgangathweni evela kwi-NXP kwaye ke abayi kufuna ukulungisa iprosesa ye-LPC55S69, nangona kunjalo i-SWD isinxibelelanisi i-J2 inokuthengiswa kwibhodi kwaye isetyenziswe ukuphuhlisa ikhowudi kwesi sixhobo.
Iinkcukacha ezongezelelweyo
Eli candelo lichaza olunye ulwazi olunxulumene nokusetyenziswa kwe-MCU-Link Base Probe.
Umthamo wokusebenza ekujoliswe kuwotage kunye noqhagamshelwano
I-MCU-Link Base Probe ayinako ukunika amandla inkqubo ekujoliswe kuyo, ngoko ke isebenzisa isekethe yoluvo (jonga kwiphepha lesi-4 lesicwangciso) ukufumanisa umthamo wonikezelo ekujoliswe kuwo.tage kunye nokumisela inqanaba shifter voltages ngokufanelekileyo. Akumele kube yimfuneko ukwenza naluphi na uhlengahlengiso kule sekethe, kodwa kukho i-pull up resistor (33kΩ) kwi-3.3V unikezelo lwe-MCU-Link. Ukuba imiba ibonwa ngokubonelelwa kwenkqubo ekujoliswe kuyo echaphazelekayo yi-MCU-Link edityanisiweyo ngoko i-R16 inokususwa kwaye i-SJ1 itshintshile ukuze idibanise kwindawo ye-1-2. Oku kuya kulungisa abatshintshi bezinga kwi-voltaginqanaba elibonwa kwi-pin 1 ye-SWD connector, kwaye ifuna ukuba unikezelo olujoliswe kuyo lunokuxhasa iimfuno zokufaka i-VCCB kwi-level shifter device. Akukhuthazwa ukwenza olu hlengahlengiso de/ngaphandle kokuba inkqubo ekujoliswe kuyo ihlolwe ngononophelo ukubona ukuba ireferensi echanekileyo/umthamo wonikezelo.tage ikhona kwi-pin 1 ye-SWD connector (J6).
Ulwazi olusemthethweni
Ukuzihlangula
- Iwaranti encinci kunye noxanduva - Ulwazi olukolu xwebhu lukholelwa ukuba luchanekile kwaye luthembekile. Nangona kunjalo, i-NXP Semiconductors ayinikezi naziphi na iinkcazo okanye iziqinisekiso, ezichazwe okanye ezichazwe, malunga nokuchaneka okanye ukuphelela kolwazi olunjalo kwaye akayi kuba nabutyala ngemiphumo yokusetyenziswa kolwazi olunjalo.
- Akukho siganeko siya kuba noxanduva lwe-NXP Semiconductors kuwo nawuphi na umonakalo ongathanga ngqo, ongalindelekanga, owohlwayo, okhethekileyo okanye olandelelweyo (kubandakanywa - ngaphandle kokuthintelwa - iingeniso ezilahlekileyo, ukugcinwa okulahlekileyo, ukuphazamiseka kweshishini, iindleko ezinxulumene nokususwa okanye ukutshintshwa kwazo naziphi na iimveliso okanye iintlawulo zokusebenza kwakhona) nokuba okanye hayi loo monakalo usekwe kubugwenxa (kubandakanywa nokungakhathali), iwaranti, ukwaphulwa kwesivumelwano okanye nayiphi na ithiyori yezomthetho.
- Nangona kukho nawuphi na umonakalo onokuthi umthengi awenze nangasiphi na isizathu, i-aggregate ye-NXP Semiconductors kunye netyala elongezelekayo kumthengi kwiimveliso ezichazwe apha ziya kuthintelwa ngokuhambelana neMiqathango kunye neemeko zentengiso ye-NXP Semiconductors.
- Ilungelo lokwenza utshintsho - I-NXP Semiconductors inelungelo lokwenza utshintsho kulwazi olupapashwe kolu xwebhu, kubandakanywa ngaphandle kokunciphisa imilinganiselo kunye neenkcazo zemveliso, nangaliphi na ixesha kwaye ngaphandle kwesaziso. Olu xwebhu luthatha indawo kwaye luthatha indawo yalo lonke ulwazi olunikelwe phambi kopapasho apha.
- Ukufaneleka kokusetyenziswa - Iimveliso ze-Semiconductors ze-NXP aziyilwanga, zigunyazisiweyo okanye zigunyazisiweyo ukuba zilungele ukusetyenziswa kwinkxaso yobomi, iinkqubo ezibaluleke kakhulu zobomi okanye ukhuseleko-ezibalulekileyo okanye izixhobo, okanye kwizicelo apho ukungaphumeleli okanye ukungasebenzi kwemveliso ye-NXP Semiconductors inokulindeleka ngokufanelekileyo. ukukhokelela kumonzakalo wobuqu, ukufa okanye ipropathi eqatha okanye umonakalo wokusingqongileyo. I-NXP Semiconductors ayamkeli uxanduva lokubandakanywa kunye / okanye ukusetyenziswa kweemveliso ze-NXP ze-Semiconductors kwezo zixhobo okanye izicelo kwaye ngoko ke ukufakwa kunye / okanye ukusetyenziswa kumngcipheko womthengi.
- Usetyenziso — Usetyenziso oluchazwe apha kuyo nayiphi na yezi mveliso zezemizekeliso kuphela. Ii-Semiconductors ze-NXP azenzi ukumelwa okanye iwaranti yokuba ezo zicelo ziya kulungela usetyenziso oluchaziweyo ngaphandle kovavanyo olongezelelweyo okanye ukuguqulwa.
- Abathengi banoxanduva loyilo kunye nokusebenza kwezicelo zabo kunye neemveliso zisebenzisa iimveliso ze-NXP Semiconductors, kwaye i-NXP Semiconductors ayamkeli uxanduva lwalo naluphi na uncedo ngezicelo okanye ukuyila kwemveliso yabathengi. Luxanduva lomthengi kuphela ukufumanisa ukuba imveliso ye-NXP Semiconductors ifanelekile kwaye ifanelekile kwizicelo zomthengi kunye neemveliso ezicwangcisiweyo, kunye nesicelo esicwangcisiweyo kunye nokusetyenziswa komthengi wesithathu (abaxumi). Abathengi kufuneka babonelele ngoyilo olufanelekileyo kunye nezikhuselo zokusebenza ukunciphisa imingcipheko enxulumene nezicelo zabo kunye neemveliso.
- I-NXP Semiconductors ayilwamkeli naluphi na uxanduva olunxulumene naluphi na ukusilela, umonakalo, iindleko okanye ingxaki esekelwe kubo nabuphi na ubuthathaka okanye ukusilela kwizicelo zomthengi okanye iimveliso, okanye isicelo okanye ukusetyenziswa ngumthengi wesithathu (s). Umthengi unoxanduva lokwenza zonke iimvavanyo eziyimfuneko kwizicelo zomthengi kunye neemveliso zisebenzisa iimveliso ze-NXP Semiconductors ukuze kuthintelwe ukungagqibeki kwezicelo kunye neemveliso okanye kwesicelo okanye ukusetyenziswa ngabathengi beqela lesithathu lomthengi. I-NXP ayamkeli naluphi na uxanduva malunga noku.
- Ulawulo lokuthumela ngaphandle — Olu xwebhu kunye nezinto ezichazwe apha zingalawulwa yimigaqo yolawulo lokuthumela ngaphandle. Ukuthumela ngaphandle kunokufuna isigunyaziso sangaphambili esivela kwabasemagunyeni besizwe.
Iimpawu zokuthengisa
Isaziso: Zonke iimpawu ezikhankanyiweyo, amagama eemveliso, amagama eenkonzo kunye neempawu zorhwebo ziyipropathi yabanini bazo.
Lonke ulwazi olunikezelweyo kolu xwebhu luxhomekeke kwizichaso ezisemthethweni.
© NXP BV 2021. Onke amalungelo agciniwe.
Amaxwebhu / Izibonelelo
 |
NXP UM11931 MCU-Link Base Standalone Debug Probe [pdf] Incwadi yokusebenzisa UM11931 MCU-Link Base Standalone Debug Probe, UM11931, MCU-Link Base Standalone Debug Probe, Standalone Debug Probe, Debug Probe, Probe |