NXP UM11931 MCU-Link Base Standalone Debug Probe
Product Information:
- Product Name: MCU-Link Base Standalone Debug Probe
- Mugadziri: NXP Semiconductors
- Model Number: UM11931
- Shanduro: Rev. 1.0 - Kubvumbi 10, 2023
- Keywords: MCU-Link, Debug probe, CMSIS-DAP
- Abstract: MCU-Link Base yakamira debug probe mushandisi bhuku
Mirayiridzo Yekushandisa Chigadzirwa:
Nhanganyaya
Iyo MCU-Link Base Standalone Debug Probe chishandiso chinogoneka chinobvumira kugadzirisa uye kugadzirwa kwetsika debug probe kodhi. Inosanganisira akasiyana maficha uye ma interfaces ekubatanidza isina musono neanotangwa masisitimu.
Bhodhi marongerwo uye Settings
Iwo anobatanidza uye akasvetuka paMCU-Link ndeaya anotevera:
| Circuit ref | Tsanangudzo |
|---|---|
| LED1 | Chimiro che LED |
| J1 | Host USB connector |
| J2 | LPC55S69 SWD yekubatanidza (yekuvandudza kwetsika debug probe kodhi chete) |
| J3 | Firmware yekuvandudza jumper (isa uye re-simba rekuvandudza firmware) |
| J4 | VCOM dzima jumper (isa kudzima) |
| J5 | SWD disable jumper (isa kudzima) |
| J6 | SWD yekubatanidza yekubatanidza kune chinangwa system |
| J7 | VCOM kubatana |
| J8 | Digital yekuwedzera yekubatanidza Pin 1: Analogi inopinza Mapini 2-4: Akachengetwa |
Kuisa uye firmware sarudzo
Iyo MCU-Link debug probe inouya neNXP's CMSIS-DAP protocol based firmware pre-yakaiswa, inotsigira ese maficha ehardware. Nekudaro, ndapota cherechedza kuti iyi chaiyo modhi yeMCU-Link haitsigire iyo J-Link firmware kubva kuSEGGER.
Kana bhodhi rako risina debug probe firmware image yakaiswa, hapana ma LED anovhenekera kana bhodhi rakabatana nekombuta inotambira. Mumamiriro ezvinhu akadaro, unogona kugadzirisa bhodhi firmware nekutevera mirairo muChikamu 3.2 pazasi.
Host mutyairi uye utility installation
Kuisa madhiraivha anodiwa uye zvishandiso zveMCU-Link, ndapota tarisa kune nhanho-ne-nhanho yekuisa gwara rakapihwa pabhodhi's. webpeji pa nxp.com: https://www.nxp.com/demoboard/MCU-LINK.
Neimwe nzira, iwe unogona zvakare kushandisa iyo Linkserver utility inowanikwa pa https://nxp.com/linkserver iyo inoisa madhiraivha anodiwa uye firmware otomatiki.
Document information
| Info | Content |
| Keywords | MCU-Link, Debug probe, CMSIS-DAP |
| Abstract | MCU-Link Base yakamira debug probe mushandisi bhuku |
Nhoroondo yekudzokorora
| Rev | Date | Tsanangudzo |
| 1.0 | 20220410 | Kutanga kusunungurwa. |
Contact information
Kuti uwane rumwe ruzivo, ndapota shanya: http://www.nxp.com
Kune kero dzehofisi yekutengesa, ndapota tumira email ku: salesaddresses@nxp.com
Nhanganyaya
Yakabatanidzwa neNXP uye Embedded Artists, MCU-Link ine simba uye inodhura-inoshanda debug probe inogona kushandiswa zvisina musono neMCUXpresso IDE, uye zvakare inofambirana ne3rd bato IDEs inotsigira CMSIS-DAP protocol. MCU-Link inosanganisira akawanda maficha ekugonesa yakadzamirirwa software kuvandudza, kubva kune yekutanga debug kuenda kuprofiling uye UART kuenda ku USB bhiriji (VCOM). MCU-Link ndeimwe yemhando dzakasiyana-siyana dzekugadzirisa zvigadziriso zvinoenderana neMCU-Link architecture, iyo inosanganisirawo Pro modhi uye mashandisirwo akavakirwa muNXP evaluation board (ona https://nxp.com/mculink kuti uwane rumwe ruzivo). MCU-Link mhinduro dzakavakirwa pane ine simba, yakaderera simba LPC55S69 microcontroller uye ese mavhezheni anomhanya yakafanana firmware kubva kuNXP.
Mufananidzo 1 MCU-Link marongerwo uye zvinongedzo
Iyo MCU-Link inosanganisira zvinotevera maficha
- CMSIS-DAP firmware yekutsigira ese NXP Arm® Cortex®-M yakavakirwa MCUs ine SWD debug interfaces.
- High speed USB host interface
- USB kunanga UART zambuko (VCOM)
- SWO profiling uye I/O maficha
- CMSIS-SWO rutsigiro
- Analog chiratidzo chekutarisa kupinza
Bhodhi marongerwo uye Settings
Iwo anobatanidza uye anosvetuka paMCU-Link anoratidzwa muMufananidzo 1 uye tsananguro yeizvi inoratidzwa muTafura 1.
Tafura 1 Zviratidzo, jumpers, mabhatani uye connectors
| Circuit ref | Tsanangudzo | Default |
| LED1 | Chimiro che LED | n/a |
| J1 | Host USB connector | n/a |
| J2 | LPC55S69 SWD connector (yekuvandudza tsika yedebug probe code chete) | Haina kuiswa |
| J3 | Firmware update jumper (isa uye re-simba kuti uvandudze firmware) | Vhura |
| J4 | VCOM dzima jumper (isa kudzima) | Vhura |
| J5 | SWD disable jumper (isa kudzima) | Vhura |
| J6 | SWD yekubatanidza yekubatanidza kune chinangwa system | n/a |
| J7 | VCOM kubatana | n/a |
| J8 | Digital yekuwedzera yekubatanidza Pin 1: Analogi yekupinda
Mapini 2-4: Akachengetwa |
Haina kuiswa |
Kuisa uye firmware sarudzo
MCU-Link debug probes fekitori yakarongwa neNXP's CMSIS-DAP protocol based firmware, iyo inotsigirawo zvimwe zvese zvinotsigirwa muhardware. (Ziva kuti iyi modhi yeMCU-Link haigone kumhanyisa vhezheni yeJ-Link firmware kubva kuSEGGER inowanikwa kune mamwe maMCU-Link mashandisirwo.)
Mamwe mayuniti ekutanga ekugadzira anogona kunge asina debug probe firmware mufananidzo wakaiswa. Kana izvi zviri izvo hapana ma LED anovhenekera kana bhodhi rakabatana nekombuta inotambira. Mumamiriro ezvinhu aya bhodhi firmware inogona kuramba ichivandudzwa nekutevera mirairo muChikamu 3.2 pazasi.
Host mutyairi uye utility installation
Nhanho-ne-nhanho yekuisa gwara reMCU-Link rinopihwa pabhodhi web peji pa nxp.com (https://www.nxp.com/demoboard/MCU-LINK.) Mamwe ose echikamu chino anotsanangura matanho mamwe chete anogona kuwanikwa papeji iyoyo.
MCU-Link ikozvino inotsigirwawo neiyo Linkserver utility (https://nxp.com/linkserver), uye kushandisa Linkserver installer ichaisawo madhiraivha anodiwa uye firmware update utilities inotaurwa mune yakasara yechikamu chino. Zvinokurudzirwa kuti iyi yekuisa ishandiswe kunze kwekunge uri kushandisa MCUXpresso IDE vhezheni ye11.6.1 kana kupfuura. Ndokumbira utarise iyo MCUXpresso IDE inoenderana (ona Tafura 2) usati wagadzirisa iyo MCU-Link firmware.
MCU-Link debug probes inotsigirwa pa Windows 10, MacOS X uye Ubuntu Linux mapuratifomu. MCU-Link probes inoshandisa yakajairwa OS madhiraivha asi chirongwa chekuisa cheWindows chinosanganisira ruzivo files kupa mushandisi ane hushamwari mudziyo mazita. Kana iwe usingade kushandisa iyo Linkserver installer package unogona kuisa ruzivo urwu files uye iyo firmware MCU-Link yekuvandudza utility, nekuenda kune Dhizaini Zviwanikwa chikamu chebhodhi web peji uye kusarudza "Development software" kubva kuSOFTWARE chikamu. Kuisa mapakeji ega yega yega OS inozoratidzwa. Dhawunirodha pasuru yeako host OS yekuisa (Linux kana MacOS) kana mhanyisa iyo yekuisa (Windows). Mushure mekumisa madhiraivha eOS, komputa yako yekutambira ichave yakagadzirira kushandiswa neMCU-Link. Zvinowanzokurudzirwa kuti uvandudze kune yazvino vhezheni ye firmware sezvo izvi zvingave zvachinja kubva yako MCU-Link yakagadzirwa asi tanga watarisa Tafura 2 kuti usimbise kuenderana neMCUXpresso IDE vhezheni yauri kushandisa. Ona Chikamu 3.2 pamatanho ekuita kuita firmware update.
Kugadziridza MCU-Link firmware
Kuti ugadzirise iyo MCU-Link's firmware inofanirwa kukwidzwa mu (USB) ISP modhi. Kuti uite izvi isa jumper J4 wobva wabatanidza MCU-Link kune yako komputa uchishandisa diki B USB tambo yakabatana neJ1. Iyo tsvuku STATUS LED (LED3) inofanirwa kuvheneka uye kuramba yakabatika (kuti uwane rumwe ruzivo nezve LED mamiriro eruzivo tarisa Chikamu 4.7.
LINK_installer_Vx_xxx directory (apo Vx_xxx parinotaridza nhamba yevhezheni, semuenzaniso V3.108), wotevera mirairo yekuisa iri mureadme.txt kutsvaga nekumhanyisa zvigadziriso zve firmware zve CMSIS-DAP. Mushure mekugadzirisa firmware uchishandisa imwe yezvinyorwa izvi, bvisa bhodhi kubva kune kombiyuta inotakura, bvisa J4 uye wozobatanidza zvakare bhodhi.
CHERECHEDZA: Kubva muvhezheni V3.xxx zvichienda mberi, iyo MCU-Link firmware inoshandisa WinUSB panzvimbo yeHID yekushanda kwepamusoro, asi izvi hazvienderane neshanduro yekutanga yeMCUXpresso IDE. CMSIS-SWO tsigiro ichaunzwa zvakare kubva kuV3.117, ichigonesa SWO-inoenderana maficha mune asiri-NXP IDEs, asi zvakare ichida yakagadziridzwa IDE. Ndokumbira utarise tafura iri pazasi kuti ienderane pakati pevhezheni yeMCU-Link firmware neMCUXpresso IDE. Yekupedzisira V2.xxx firmware kuburitswa (2.263) inowanikwa pa https://nxp.com/mcu-link kune vanogadzira vachishandisa yekare IDE shanduro.
Tafura 2 Firmware maficha uye MCUXpresso IDE kuenderana
| MCU-Link firmware shanduro | USB
mutyairi mhando |
CMSIS- SWO
rutsigiro |
LIBUSSIO | MCUXpresso IDE shanduro dzinotsigirwa |
| V1.xxx uye V2.xxx | HID | Aihwa | Ehe | MCUXpresso 11.3 zvichienda mberi |
| V3.xxx kusvika uye kusanganisira V3.108 | WinUSB | Aihwa | Aihwa | MCUXpresso 11.7 zvichienda mberi ZVINODIWA |
| V3.117 zvichienda mberi | WinUSB | Ehe | Aihwa | MCUXpresso 11.7.1 kana gare gare ZVINODIWA |
Mushure mekugadzira iyo MCU-Link neCMSIS-DAP firmware, USB serial bhazi mudziyo uye chaiyo com port ichanyora, sezvakaratidzwa pazasi (yeWindows mauto):
Mufananidzo 2 MCU-Link USB zvishandiso (kubva kuV3.xxx firmware, VCOM port inogoneswa)
Kana uri kushandisa firmware V2.xxx kana kuti kare uchaona MCU-Link CMSIS-DAP mudziyo pasi USB HIB midziyo kwete Universal Serial Bhazi madivayiri.
Chimiro che LED chinoramba chichidzima kubva pakuenda kuenda uye kudzoka zvakare ("kufema").
Kana imwe yazvino firmware vhezheni kupfuura iyo yakarongwa muMCU-Link yako iripo, MCUXpresso IDE (kubva pane vhezheni 11.3 zvichienda mberi) ichakuzivisa iwe kune izvi paunoshandisa probe muchikamu chekugadzirisa; nyatsocherechedza shanduro ye firmware yaunoisa kuti uone kuti inopindirana neIDE vhezheni yauri kushandisa. Kana uri kushandisa imwe IDE ine MCU-Link zvinokurudzirwa kuti uvandudze firmware kuti uone kuti yazvino vhezheni ye firmware yakaiswa.
Setup yekushandisa nematurusi ekuvandudza
Iyo MCU-Link debug probe inogona kushandiswa nemaIDE anotsigirwa mukati meMCUXpresso ecosystem (MCUXpresso IDE, IAR Embedded Workbench, Keil MDK, MCUXpresso yeVisual Studio Code (kubva muna Chikunguru 2023)); kuti uwane rumwe ruzivo nezvekutanga nema IDE aya ndapota shanyira iyo Kutanga chikamu cheMCU-Link board peji pa. nxp.com.
Shandisa neMCUXpresso IDE
MCUXpresso IDE inoziva chero mhando yeMCU-Link uye icharatidza mhando dzekuferefeta uye yakasarudzika maratidziro eese maprobes ainowana mune yekuferefeta dialog kana uchitanga chikamu chekugadzirisa. Iyi dialog icharatidzawo firmware version, uye icharatidza yambiro kana firmware isiri iyo yazvino vhezheni. Ona Chikamu 3.2 kuti uwane ruzivo rwekugadzirisa firmware. MCUXpresso IDE 11.3 kana kuti gare gare inofanira kushandiswa paunenge uchishandisa MCU-Link.
Shandisa nemamwe maIDE
MCU-Link inofanirwa kuzivikanwa seCMSIS-DAP probe nemamwe maIDE (zvichienderana neiyo firmware yakarongwa), uye inofanirwa kushandiswa neyakajairwa marongero eiyo probe mhando. Tevedza IDE vatengesi mirairo yekuseta uye kushandiswa kweCMSIS-DAP.
Tsanangudzo yemhando
Ichi chikamu chinotsanangura akasiyana maficha eMCU-Link.
Target SWD/SWO interface
MCU-Link inopa rutsigiro rweSWD-based target debug, kusanganisira maficha anogoneswa neSWO. MCU-Link inouya netambo yekubatanidza tambo kuburikidza neJ2, 10-pini Cortex M yekubatanidza.
Malevel shifters anopihwa pakati peLPC55S69 MCU-Link processor uye chinangwa chekugonesa chinangwa processors ari pakati pe1.2V ne5V kuti igadziriswe. Chirevo voltage tracking circuit inoshandiswa kuona chinangwa voltage paSWD connector uye isa nhanho shifter target-side voltage zvakakodzera (ona schematic peji 4.)
Iyo Target SWD interface inogona kuvharwa neyakaiswa jumper J13 asi cherechedza kuti MCU-Link software inongotarisa iyi jumper panguva yeboot up.
CHERECHEDZA: Iyo MCU-Link inogona kudzoserwa simba nechinangwa kana iyo MCU-Link pachayo isina simba kuburikidza ne USB. Nechikonzero ichi zvinokurudzirwa kuti simba rishandiswe kuMCU-Link pamberi pechinangwa.
VCOM (USB kune Target UART zambuko)
MCU-Link inosanganisira UART kune USB zambuko (VCOM). Iyo inonangwa system UART inogona kubatana neMCU-Link kuburikidza nekubatanidza J7 uchishandisa tambo yakapihwa. Pin 1 yeJ7 inofanirwa kubatana kune TXD inobuda yeTarget, uye pini 2 kune iyo RXD yekuisa yeTarget.
Iyo MCU-Link VCOM mudziyo ichaverengera pane inotambira komputa ine zita reMCU-Link Vcom Port (COMxx) uko "xx" ichave inotsamira pane iyo host system. Imwe neimwe MCU-Link board ichave neyakasarudzika VCOM nhamba yakabatana nayo. Basa reVCOM rinogona kuvharwa nekuisa jumper J7 usati waisa simba pabhodhi. Ziva kuti kuisa/kubvisa iyi jumper mushure mekupa simba bhodhi hakuzove nemhedzisiro pachinhu maererano nemabatiro anoita MCU-Link software sezvo ichingotariswa pakusimuka. Izvo hazvifanirwe kudzima iyo VCOM basa kana isiri kushandiswa, kunyangwe izvi zvichigona kuchengetedza imwe USB bandwidth.
Chishandiso cheVCOM chinogadzirisika kuburikidza nekombuta inotambira (semuenzaniso Device Manager muWindows), ine zvinotevera paramita:
- Kureba kweshoko 7 kana 8 bits
- Stop bits: 1 kana 2
- Parity: hapana / zvisingaite / kunyange
Baud mitengo inosvika 5.33Mbps inotsigirwa.
Analogi probe
MCU-Link inosanganisira iyo analog siginecha yekuisa iyo inogona kushandiswa neMCUXpresso IDE kupa yakakosha chiratidzo chekutsvaga chimiro. Sezviri pavhezheni 11.4 yeMCUXpresso IDE iyi ficha inosanganisirwa neiyo simba kuyerwa dialogs.
Iyo analog yekupinda yechinhu ichi iri papini 1 yekubatanidza J8. Iyo yekupinza inopfuura yakananga muADC yekupinza yeLPC55S69; tarisa kune dhatabheti yeLPC55S69 yekupinza impedance uye humwe hunhu. Kungwarira kunofanirwa kutorwa kusaisa voltages> 3.3V kune iyi yekuisa kuitira kudzivirira kukuvara.
LPC55S69 debug connector
Vazhinji vashandisi veMCU-Link vanotarisirwa kushandisa yakajairwa firmware kubva kuNXP uye saka havazodi kugadzirisa LPC55S69 processor, zvisinei SWD yekubatanidza J2 inogona kutengeswa kubhodhi uye kushandiswa kugadzira kodhi pachigadzirwa ichi.
Mamwe mashoko
Ichi chikamu chinotsanangura rumwe ruzivo rwakabatana nekushandiswa kweMCU-Link Base Probe.
Chinangwa chekushanda voltage uye zvinobatanidzwa
Iyo MCU-Link Base Probe haigone kugonesa inotarirwa sisitimu, saka inoshandisa sensing dunhu (ona peji 4 yechirongwa) kuona chinangwa chekugovera vol.tage uye kuseta level shifter voltages saizvozvo. Izvo hazvifanirwe kuve zvakakosha kuita chero shanduko kudunhu iri, asi kune yekudhonza kumusoro resistor (33kΩ) kune 3.3V yekupihwa kweMCU-Link. Kana nyaya dzichionekwa neinotarirwa system yekupihwa iri kukanganiswa neMCU-Link iri kubatanidzwa ipapo R16 inogona kubviswa uye SJ1 yakashandurwa kuti ibatanidze kune chinzvimbo 1-2. Izvi zvinogadzirisa mazinga ekuchinja pa voltage nhanho inoonekwa papini 1 yeSWD yekubatanidza, uye inoda kuti iyo yakanangwa inopihwa inogona kutsigira iyo VCBB yekupinza zvinodiwa zveiyo level shifter zvishandiso. Izvo hazvikurudzirwe kuita zvigadziriso izvi kusvika/kunze kwekunge iyo yakanangwa system yanyatsotariswa kuti uone kuti iyo chaiyo referensi / kupa vol.tage iripo papini 1 yeSWD connector (J6).
Mashoko emutemo
Disclaimers
- Waranti yakaganhurirwa uye mutoro - Ruzivo rwuri mugwaro iri rwunotendwa kuti rwakarurama uye rwakavimbika. Nekudaro, NXP Semiconductors haipe chero chinomiririra kana waranti, inoratidzwa kana kurehwa, maererano nekururama kana kukwana kweruzivo rwakadaro uye haizovi nemhosva yemhedzisiro yekushandisa ruzivo rwakadaro.
- Hapana chiitiko chichave NXP Semiconductors ichave nemhosva kune chero isina kunanga, chiitiko, chirango, chakakosha kana chinokonzeresa kukuvadza (kusanganisira - pasina muganho - kurasikirwa purofiti, kurasikirwa mari, kukanganisa bhizinesi, mari ine chekuita nekubvisa kana kutsiva chero zvigadzirwa kana kubhadharisazve) kana kuti kwete kukuvadzwa kwakadaro kwakavakirwa pakukanganisa (kusanganisira kuregeredza), waranti, kutyora kondirakiti kana chero imwe dzidziso yemutemo.
- Zvisinei nekukuvadzwa kupi kungaitwa nemutengi nekuda kwechikonzero chero chipi zvacho, NXP Semiconductors 'aggregate uye kuwedzera mutoro kune mutengi wezvigadzirwa zvinotsanangurwa pano zvichaganhurwa zvinoenderana neMitemo nemamiriro ekutengesa kweNXP Semiconductors.
- Kodzero yekuita shanduko - NXP Semiconductors inochengetera kodzero yekuita shanduko kune ruzivo rwakaburitswa mugwaro rino, kusanganisira pasina miganhu uye tsananguro yechigadzirwa, chero nguva uye pasina chiziviso. Gwaro iri rinotsiva nekutsiva ruzivo rwese rwunopihwa risati raburitswa pano.
- Kukodzera kushandiswa - NXP Semiconductors zvigadzirwa hazvina kugadzirwa, kupihwa mvumo kana kutenderwa kuti ive yakakodzera kushandiswa mukutsigirwa kwehupenyu, hupenyu-hwakakosha kana kuchengetedza-yakakosha masisitimu kana michina, kana mukushandisa uko kutadza kana kusashanda kweNXP Semiconductors chigadzirwa chinogona kutarisirwa zvine musoro. kukonzera kukuvara kwemunhu, rufu kana pfuma yakakomba kana kukanganisa kwezvakatipoteredza. NXP Semiconductors haigamuchire mhosva yekubatanidzwa uye / kana kushandiswa kweNXP Semiconductors zvigadzirwa mumidziyo yakadaro kana maapplication uye saka kubatanidzwa kwakadaro uye / kana kushandiswa kuri panjodzi yemutengi.
- Zvishandiso - Zvikumbiro zvinotsanangurwa pano kune chero zvigadzirwa izvi ndezvekuenzanisira chete. NXP Semiconductors haiite chinomiririra kana waranti yekuti zvikumbiro zvakadaro zvichakodzera kushandiswa kwakatemwa pasina kumwe kuyedzwa kana kugadziridzwa.
- Vatengi vane basa rekugadzira uye kushanda kwezvikumbiro zvavo uye zvigadzirwa vachishandisa NXP Semiconductors zvigadzirwa, uye NXP Semiconductors haigamuchire mhosva kune chero rubatsiro nezvikumbiro kana dhizaini yechigadzirwa chevatengi. Ibasa remutengi chete kuona kana chigadzirwa cheNXP Semiconductors chakakodzera uye chakakodzera mashandisirwo emutengi uye zvigadzirwa zvakarongwa, pamwe nekurongwa kwakarongwa uye kushandiswa kwevatengi vechitatu bato vatengi. Vatengi vanofanirwa kupa dhizaini yakakodzera uye chengetedzo yekushandisa kuderedza njodzi dzine chekuita nekushandisa kwavo uye zvigadzirwa.
- NXP Semiconductors haigamuchire chero mhosva ine chekuita nechero default, kukuvara, mutengo kana dambudziko iro rinobva pane chero kusasimba kana kusarudzika mumashandisirwo emutengi kana zvigadzirwa, kana application kana kushandiswa nevatengi vechitatu bato mutengi. Mutengi ane basa rekuita kuyedzwa kwese kwakakosha kune mashandisirwo emutengi uye zvigadzirwa vachishandisa NXP Semiconductors zvigadzirwa kuitira kudzivirira kusamira kwezvishandiso uye zvigadzirwa kana zvekushandisa kana kushandiswa nemutengi wechitatu bato. NXP haigamuchire chero mutoro mune izvi.
- Export control - Gwaro iri pamwe nechinhu (s) chinotsanangurwa pano chinogona kunge chiri pasi pemitemo yekudzora kunze. Kutumira kunze kwenyika kungangoda mvumo kubva kune zviremera zvenyika.
Trademarks
Chiziviso: Ese mareferensi mabhureki, mazita echigadzirwa, mazita ebasa uye zviratidzo zvivakwa zvevaridzi vazvo.
Ruzivo rwese rwunopihwa mugwaro iri rwuri pasi pemutemo wekuzviramba.
© NXP BV 2021. Kodzero dzese dzakachengetwa.
Zvinyorwa / Zvishandiso
 |
NXP UM11931 MCU-Link Base Standalone Debug Probe [pdf] User Manual UM11931 MCU-Link Base Standalone Debug Probe, UM11931, MCU-Link Base Standalone Debug Probe, Standalone Debug Probe, Debug Probe, Probe |