I-LATTICE FPGA-UG-02042-26.4 iiCables Programming

Ukuzihlangula

I-Lattice ayinawaranti, umelo, okanye isiqinisekiso malunga nokuchaneka kolwazi oluqulethwe kolu xwebhu okanye ukufaneleka kweemveliso zayo nayiphi na injongo. Lonke ulwazi olulapha lunikiwe NJENGOKO KUNJALO kunye nazo zonke iziphene, kwaye wonke umngcipheko onxulumene nolo lwazi uphelele kuMthengi. Umthengi akayi kuthembela kuyo nayiphi na idatha kunye neenkcukacha zokusebenza okanye iiparamitha ezibonelelwe apha. Iimveliso ezithengiswa yiLattice ziphantsi kovavanyo olulinganiselweyo kwaye luxanduva loMthengi ukuzimela ngokuzimeleyo ukufaneleka kwazo naziphi na iimveliso kunye nokuvavanya kunye nokuqinisekisa okufanayo. Akukho mveliso yeLattice kufuneka isetyenziswe ngokubambisana nomsebenzi- okanye ukhuseleko-olubalulekileyo okanye naluphi na olunye usetyenziso apho ukungaphumeleli kwemveliso yeLattice kunokudala imeko apho ukwenzakala komntu, ukufa, ipropathi enzima okanye umonakalo wokusingqongileyo unokwenzeka. Ulwazi olunikwe kolu xwebhu lunelungelo kwi-Lattice Semiconductor, kwaye i-Lattice inelungelo lokwenza naluphi na utshintsho kulwazi olukolu xwebhu okanye kuyo nayiphi na imveliso nangaliphi na ixesha ngaphandle kwesaziso.

Iimbonakalo

• Inkxaso yazo zonke iimveliso ezicwangcisiweyo zeLattice
  • 2.5 V ukuya ku-3.3 V I2C inkqubo (HW-USBN-2B)
  • 1.2 V ukuya ku-3.3 VJTAG kunye nenkqubo yeSPI (HW-USBN-2B)
  • 1.2 V ukuya ku-5 VJTAG kunye nenkqubo yeSPI (zonke ezinye iintambo)
  • Ilungele ukuyila iprototyping kunye nokulungiswa kweempazamo
• Qhagamshela kwi-interface ezininzi zePC
  • I-USB (v.1.0, v.2.0)
  • I-PC Parallel Port
• Ekulula ukuyisebenzisa izihlanganisi zokucwangcisa
  • I-Versatile flywire, 2 x 5 (.100”) okanye 1 x 8 (.100”) izihlanganisi
  • Iinyawo ezi-6 (iimitha ezi-2) okanye ngaphezulu kobude bentambo yokuprograma (iPC ukuya eDUT)
• Ulwakhiwo oluthobelayo lwe-Lead-free/RoHS

IiCables zokucwangcisa

Iimveliso zeCable yokuCwangciswa kweLattice ludibaniso lwehardware yenkqubo yenkqubo yazo zonke izixhobo zeLattice. Emva kokuba ugqibe uyilo lwakho lwengqiqo kwaye wenze inkqubo file ngeLattice Diamond®/ispLEVER® Classic izixhobo zophuhliso, ungasebenzisa iDiamond Programme okanye ispVM™ isoftware yeNkqubo yokucwangcisa izixhobo ebhodini yakho. IspVM System/Diamond Programmer software yenza ngokuzenzekelayo imiyalelo yenkqubo efanelekileyo, iidilesi zeprogramu kunye nedatha yeprogram ngokusekelwe kulwazi olugcinwe kwiprogram. file kunye neeparamitha ozibeke kwi-Diamond Programmer/ispVM System. Iimpawu zeprogram ziye ziveliswa kwi-USB okanye i-port parallel ye-PC kwaye iqondiswe ngentambo yokucwangcisa kwisixhobo. Akukho malungu ongezelelweyo afunekayo ukulungiselela inkqubo.
Isoftware yeDiamond Programme/ispVM System ibandakanyiwe kuzo zonke iimveliso zesixhobo soyilo lweLattice kwaye iyafumaneka ukukhuphela kwiLattice. web indawo kwi www.latticesemi.com/programmer.

Programming Cable Pin Iingcaciso

Imisebenzi ebonelelwa ngeentambo zokucwangcisa ihambelana nemisebenzi ekhoyo kwizixhobo ezicwangcisiweyo zeLattice. Kuba ezinye izixhobo zineempawu zeprogram ezahlukeneyo, imisebenzi ethile enikezelwa yintambo yokucwangcisa inokuxhomekeka kwisixhobo esikhethiweyo ekujoliswe kuso. ispVM System/Diamond Programmer software yenza ngokuzenzekelayo imisebenzi efanelekileyo ngokusekelwe kwisixhobo esikhethiweyo. Jonga kwiTheyibhile 3.1 ukufumana i-overview yemisebenzi yentambo yokucwangcisa.
Uluhlu 3.1. Programming Cable Pin Iingcaciso.

Inkqubo yePin yeCable	Igama	Uhlobo lwePin yeCable yokuLungiselela	Inkcazo
VCC	Ukucwangcisa uMqulutage	Igalelo	Qhagamshelana kwi VCCIO okanye VCCJ inqwelomoya isixhobo target. I-ICC eqhelekileyo = 10 mA. Ibhodi ekujoliswe kuyo inikeza unikezelo lweVCC / ireferensi yentambo.
TDO/SO	Isiphumo soVavanyo lweDatha	Igalelo	Isetyenziselwa ukususa idatha nge-IEEE1149.1 (JTAG) umgangatho wenkqubo.
TDI/SI	Igalelo leDatha yoVavanyo	Isiphumo	Isetyenziselwa ukutshintsha idatha kusetyenziswa umgangatho weprogram we-IEEE1149.1.
ISPEN/PROG	Vulela	Isiphumo	Yenza isixhobo sicwangciswe. Ikwasebenza njenge-SN/SSPI Chip Khetha ukwenzela inkqubo ye-SPI nge-HW-USBN-2B.
I-TRST	Uvavanyo ngokutsha	Isiphumo	Ukhetho lwe-IEEE 1149.1 ukusetwa ngokutsha komatshini wombuso.
YENZIWE	YENZIWE	Igalelo	YENZIWE ibonisa ubume bobumbeko
TMS	Imo yoVavanyo Khetha iNgeniso	Isiphumo	Isetyenziselwa ukulawula umatshini wombuso we-IEEE1149.1.
GND	Umhlaba	Igalelo	Qhagamshela kwinqwelomoya yesixhobo ekujoliswe kuso
TCK/SCLK	Igalelo leKloko yoVavanyo	Isiphumo	Isetyenziselwa ukuvala umatshini wombuso we-IEEE1149.1
KUYO	Qalisa	Igalelo	Ibonisa isixhobo silungele uqwalaselo ukuze luqalise. I-INITN ifumaneka kuphela kwezinye izixhobo.
I2C: SCL*	I2C SCL	Isiphumo	Ibonelela nge-I2C yesiginali ye-SCL
I2C: SDA*	I2C SDA	Isiphumo	Ibonelela nge-SDA yomqondiso we-I2C.
5 V OUT*	5 V Phuma	Isiphumo	Ibonelela ngomqondiso we-5 V kwi-iCEprogM1050 Programmer.

Phawula: Ifumaneka kuphela kwintambo ye-HW-USBN-2B.

Phawula: Ifuna i-Diamond Programmer 3.1 okanye kamva.

Umfanekiso 3.2. INkqubo yoNxibelelwano lweNkqubo yeCable yeNkqubo yePC (HW-USB-1A okanye HW-USB-2A)*
Phawula: I-Lattice PAC-Designer® software ayixhasi inkqubo ngeentambo ze-USB. Ukucwangcisa izixhobo ze-ispPAC ngezi ntambo, sebenzisa i-software ye-Diamond Programmer/ispVM System.

Phawula: HW7265-DL3, HW7265-DL3A, HW-DL-3B, HW-DL-3C kunye ne-HW-DLN-3C zimveliso ezisebenza ngokulinganayo.

Umfanekiso 3.4. Inkqubo yeCable In-System Programming Interface yePC (pDS4102-DL2 okanye pDS4102- DL2A)

Umfanekiso 3.5. Inkqubo yeCable In-System Programming Interface yePC (HW7265-DL2 okanye HW7265-DL2A)*

Phawula: Ngeenjongo zokubhekisela, i-2 x 10 ikhonkco kwi-HW7265-DL2 okanye i-HW7265-DL2A ilingana neTyco 102387-1. Oku kuya kujongano kumgangatho we-100-mil isithuba 2 x 5 iiheader, okanye i-2 x 5 keyed, i-recessed indoda isinxibelelanisi esifana ne-3M N2510-5002RB.

Inkqubo yesoftware

I-Diamond Programmer kunye neNkqubo ye-ispVM yezixhobo zeClassic sisixhobo sesoftware solawulo olukhethiweyo kuzo zonke izixhobo zeLattice kunye neentambo zokukhuphela. Inguqulelo yamva nje yeLattice Diamond Programmer okanye ispVM System isoftwe iyafumaneka ukuze ikhutshelwe kwiLattice web indawo kwi-www.latticesemi.com/programmer.

Iingqwalasela zoYilo lweBhodi ekujoliswe kuyo

I-4.7 kΩ isichasi sokutsalela phantsi siyacetyiswa kuqhagamshelo lwe-TCK kwibhodi ekujoliswe kuyo. Oku kutsalwa phantsi kuyacetyiswa ukuba kuthintelwe ukubanjwa ngokungalindelekanga komlawuli we-TAP owenziwe yimiphetho yewotshi ekhawulezayo okanye njenge VCC r.amps phezulu. Oku kutsalwa phantsi kucetyiswa kuzo zonke iintsapho ezicwangcisiweyo zeLattice.
Iimpawu ze-I2C ze-SCL kunye ne-SDA zivulekile. I-2.2 kΩ isixhasi sokutsalela phezulu kwiVCC siyafuneka kwibhodi ekujoliswe kuyo. Kuphela amaxabiso e-VCC e-3.3 V kunye ne-2.5 V ye-I2C axhaswa ngeentambo ze-HW-USBN-2B.
Kwiintsapho zesixhobo se-Lattice ezibonisa amandla aphantsi, kuyacetyiswa ukuba udibanise i-500 Ω isixhasi phakathi kwe-VCCJ kunye ne-GND ngexesha lekhefu lenkqubo xa intambo yeprogram ye-USB iqhagamshelwe kuyilo lwebhodi yamandla aphantsi kakhulu. I-FAQ iyafumaneka exoxa ngoku nzulu ngakumbi apha:
http://www.latticesemi.com/en/Support/AnswerDatabase/2/2/0/2205
Inkqubo kaJTAG isantya sezibuko lokuprograma sinokufuna ukulawulwa xa usebenzisa iintambo zokucwangcisa eziqhagamshelwe kwiiPCB zabathengi. Oku kubaluleke ngakumbi xa kukho indlela ende yePCB okanye ngezixhobo ezininzi ezibotshelelwe ngamatyathanga. Isoftware yenkqubo yeLattice inokulungelelanisa ixesha le-TCK esetyenziswa kwi-JTAG izibuko lenkqubo ukusuka kwintambo. Esi sicwangciso se-port esichanekileyo esisezantsi se-TCK sixhomekeke kwizinto ezininzi, kubandakanywa isantya sePC kunye nohlobo lwekhebula elisetyenzisiweyo (i-port parallel, i-USB okanye i-USB2). Olu phawu lwesoftware lubonelela ngokhetho lokucotha i-TCK yolungiso lweempazamo okanye iimeko-bume ezingxolayo. I-FAQ iyafumaneka exoxa ngoku nzulu ngakumbi apha: http://www.latticesemi.com/en/Support/AnswerDatabase/9/7/974.aspx
Intambo yokukhuphela ye-USB ingasetyenziselwa ukucwangcisa uMphathi waMandla okanye iimveliso ze-ispClock ngeLattice programming software. Xa usebenzisa intambo ye-USB kunye nezixhobo zoMphathi waMandla I, (POWR604, POWR1208, POWR1208P1), kufuneka ucothise ukwenza i-TCK ngomlinganiselo we-2. I-FAQ iyafumaneka exoxa ngoku nzulu ngakumbi apha:
http://www.latticesemi.com/en/Support/AnswerDatabase/3/0/306.aspx

Inkqubo yeFlywire kunye neReferensi yoQhagamshelwano

Jonga kwiTheyibhile 6.1 ukuchonga, ngesixhobo ngasinye seLattice, indlela yokudibanisa iintambo ezahlukeneyo zentambo yokucwangcisa iLattice. JTAG, SPI kunye noqwalaselo lwe-I2C ichongiwe ngokucacileyo. Iintambo zelifa kunye nehardware zibandakanyiwe ukuze zisetyenziswe. Ukongeza, ulungelelwaniso lweheader ezahlukeneyo ludweliswe.
Uluhlu 6.1. I-Pin kunye neReferensi yeCable

HW-USBN-2B Umbala weFlywire	TDI/SI	TDO/SO	TMS	TCK/SCLK	ISPEN/PROG	YENZIWE	I-TRST(OUTPUT)	VCC	GND	I2C
	Orenji	Ntsundu	Mfusa	Mhlophe	Lubhelu	Luhlaza	Luhlaza	Bomvu	Mnyama	Lubhelu
HW-USBN-2A Umbala weFlywire	TDI	TDO	TMS	TCK	ispEN/PROG	KUYO	I-TRST(ISIPHUMO)/YENZIWE(INPUT)	VCC	GND
	Orenji	Ntsundu	Mfusa	Mhlophe	Lubhelu	Luhlaza	Luhlaza	Bomvu	Mnyama
HW-DLN-3C Umbala weFlywire	TDI	TDO	TMS	TCK	ispEN/PROG	na	I-TRST(OUTPUT)	VCC	GND
	Orenji	Ntsundu	Mfusa	Mhlophe	Lubhelu		Luhlaza	Bomvu	Mnyama
Programming cable pin uhlobo Isindululo seBhodi ekujoliswe kuyo	Isiphumo	Igalelo	Isiphumo	Isiphumo	Isiphumo	Igalelo	Igalelo/Imveliso	Igalelo	Igalelo	Ou
	—	—	4.7 kΩ Tsala-Phezulu	4.7 kΩ Tsala-Phantsi	(Qaphela 1)	—	—	(Qaphela 2)	—	(Hayi (Hayi
	Qhagamshela iingcingo zentambo yokucwangcisa (ngasentla) kwisixhobo esihambelanayo okanye izikhonkwane zeheader (belo

JTAG Izixhobo zePort

ECP5™	TDI	TDO	TMS	TCK	Uqhagamshelo olukhethwayo kwisixhobo ispEN, PROGRAMN, I-INITN, YENZIWE kunye/okanye imiqondiso yeTRST (Chaza kwiisetingi zeSiko le-I/O kwiNkqubo ye-ispVM okanye isoftware yeDiamond Programmer. Ayizizo zonke izixhobo ezinazo ezi phini zikhoyo)	Kufuneka	Kufuneka
ILatticeECP3™/LatticeECP2M™ ILatticeECP2™/LatticeECP™/ILatticeEC™	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
LatticeXP2™/LatticeXP™	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
LatticeSC™/LatticeSCM™	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
I-MachXO2™/MachXO3™/MachXO3D™	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
MachXO™	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
I-ORCA®/FPSC	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
ispXPGA®/ispXPLD™	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
ispMACH® 4000/ispMACH/ispLSI® 5000	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
MACH®4A	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
ispGDX2™	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
ispPAC®/ispClock™ (Qaphela 4)	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka
UMphathi weQonga™/uMphathi waMandla/uMphathi waMandla II/uMphathi weQonga II (Qaphela 4)	TDI	TDO	TMS	TCK		Kufuneka	Kufuneka

Uluhlu 6.1. I-Pin kunye neReferensi yeCable

HW-USBN-2B Umbala weFlywire	TDI/SI	TDO/SO	TMS	TCK/SCLK	ISPEN/PROG	YENZIWE	I-TRST(OUTPUT)	VCC	GND	I2C
	Orenji	Ntsundu	Mfusa	Mhlophe	Lubhelu	Luhlaza	Luhlaza	Bomvu	Mnyama	Yelo
HW-USBN-2A Umbala weFlywire	TDI	TDO	TMS	TCK	ispEN/PROG	KUYO	I-TRST(ISIPHUMO)/YENZIWE(INPUT)	VCC	GND
	Orenji	Ntsundu	Mfusa	Mhlophe	Lubhelu	Luhlaza	Luhlaza	Bomvu	Mnyama
HW-DLN-3C Umbala weFlywire	TDI	TDO	TMS	TCK	ispEN/PROG	na	I-TRST(OUTPUT)	VCC	GND
	Orenji	Ntsundu	Mfusa	Mhlophe	Lubhelu		Luhlaza	Bomvu	Mnyama
Programming cable pin uhlobo Isindululo seBhodi ekujoliswe kuyo	Isiphumo	Igalelo	Isiphumo	Isiphumo	Isiphumo	Igalelo	Igalelo/Imveliso	Igalelo	Igalelo	O
	—	—	4.7 kΩ Tsala-Phezulu	4.7 kΩ Tsala-Phantsi	(Qaphela 1)	—	—	(Qaphela 2)	—	(N (N
	Qhagamshela iingcingo zentambo zokucwangcisa (ngasentla) kwisixhobo esihambelanayo okanye izikhonkwane zeheader (ngezantsi

Slave SPI Port Devices

ECP5	UMOSI	MISO	—	CCLK	SN	Uqhagamshelo olukhethwayo kwisixhobo PROGRAMN, INITN kunye/okanye imiqondiso EYENZIWEYO		Kufuneka	Kufuneka
I-LatticeECP3	UMOSI	MISO	—	CCLK	SN			Kufuneka	Kufuneka
I-MachXO2/MachXO3/MachXO3D	SI	SO	—	CCLK	SN			Kufuneka	Kufuneka
I-CrossLink™ LIF-MD6000	UMOSI	MISO	—	SPI_SCK	SPI_SS	Khetha. CDONE	CRESET_B	Kufuneka	Kufuneka
I-ICE40™/iCE40LM/iCE40 Ultra™/ iCE40 UltraLite™	SPI_SI	SPI_SO	—	SPI_SCK	SPI_SS_B	Khetha. CDONE	CRESET_B	Kufuneka	Kufuneka

I2C Port Devices

I-MachXO2/MachXO3/MachXO3D	—	—	—	—	Uqhagamshelo olukhethwayo kwisixhobo PROGRAMN, INITN kunye/okanye imiqondiso EYENZIWEYO			Kufuneka	Kufuneka
Umphathi weQonga II	—	—	—	—				Kufuneka	Kufuneka	SCL_M
L-ASC10	—	—	—	—	—	—	—	Kufuneka	Kufuneka
I-CrossLink LIF-MD6000	—	—	—	—	—	Khetha. CDONE	CRESET_B	Kufuneka	Kufuneka

Iiheader

1 x 10 conn (iintambo ezahlukeneyo)	3	2	6	8	4	9 okanye 10	5 okanye 9	1	7
1 x 8 conn (jonga umfanekiso 3.4)	3	2	6	8	4	—	5	1	7
2 x 5 conn (jonga umfanekiso 3.5)	5	7	3	1	10	—	9	6	2, 4, okanye 8

Abadwelisi beenkqubo

Umzekelo 300	5	7	3	1	10	—	9	6	2, 4, okanye 8
iCEprog™ iCEprogM1050	8	5	—	7	9	3	1	6	10

Amanqaku: 

• Kwizixhobo ze-ISP zeLattice ezindala, i-0.01 μF i-decoupling capacitor iyafuneka kwi-ispEN/INABLE ibhodi ekujoliswe kuyo.
• Kwi-HW-USBN-2A/2B, ibhodi ekujoliswe kuyo inika amandla - I-ICC eqhelekileyo = 10 mA. Kwizixhobo ezinepini ye-VCCJ, i-VCCJ kufuneka idibaniswe izixhobo, idibanise i-VCCIO yebhanki efanelekileyo kwi-VCC yekhebula. I-0.1 μF i-decoupling capacitor iyafuneka kwi-VCCJ okanye kwi-VCCIO kufutshane nesixhobo. iphepha ukumisela ukuba isixhobo sine-pin ye-VCCJ okanye yintoni i-VCCIO yebhanki elawula izibuko lenkqubo ekujoliswe kuyo (oku kusenokungafani noko kujoliswe kuko 3. Vula imiqondiso yokuhambisa amanzi. inqwelomoya apho iVCC iqhagamshelwe kuyo iintambo ze-HW-USBN-2.2B kwiVCC.
• Xa usebenzisa i-PAC-Designer® isoftwe kwinkqubo ye-ispPAC okanye izixhobo ze-ispClock, musa ukuqhagamshela i-TRST/DONE.
• Ukuba usebenzisa ikhebula elidala kune-HW-USBN-2B, qhagamshela i-+5 V unikezelo lwangaphandle phakathi kwe-iCEprogM1050 pin 4 (VCC) kunye ne-pin 2 (GND).
• Kwi-HW-USBN-2B, kuphela ixabiso le-VCC le-3.3 V thru 2.5 V lixhaswa kwi-I2C.

Ukuqhagamshela iCableing Cable

Ibhodi ekujoliswe kuyo kufuneka ingabi namandla xa idibanisa, iqhawula, okanye iphinda idibanise intambo yokucwangcisa. Soloko uqhagamshela iphini yentambo yenkqubo ye-GND (icingo elimnyama) phambi kokuqhagamshela nayiphi na enye i-JTAG izikhonkwane. Ukungaphumeleli ukulandela ezi nkqubo kunokubangela umonakalo kwisixhobo esicwangcisiweyo ekujoliswe kuso.

Iphini yokucwangcisa iCable TRST

Ukuqhagamshela ibhodi ye-TRST pin kwintambo ye-TRST pin ayikhuthazwa. Endaweni yoko, qhagamshela ibhodi ye-TRST pin kwiVcc. Ukuba ibhodi ye-TRST pin iqhagamshelwe kwintambo ye-TRST pin, yalela ispVM/Diamond Programmer ukuba iqhube i-TRST pin phezulu.

Ukuqwalasela ispVM/Diamond Programmer ukuqhuba i-TRST pin phezulu:

• Khetha into yemenyu yeeKhetho.
• Khetha iCable kunye ne-I/O Port Setup.
• Khetha i-TRST/Seta kwakhona i-Pin-Connected checkbox.
• Cofa iqhosha lerediyo ye-Seta Phezulu.

Ukuba ukhetho olufanelekileyo alukhethwanga, i-TRST pin iqhutywa phantsi yi ispVM/Diamond Programmer. Ngenxa yoko, ikhonkco le-BSCAN alisebenzi kuba ikhonkco litshixiwe kwi-RESET state.

Inkqubo yeCable Cable ispEN Pin

Ezi zikhonkwane zilandelayo kufuneka zisekelwe:

• Iphini ye-BSCAN yezixhobo ze-2000VE
• ENABLE pin of MACH4A3/5-128/64, MACH4A3/5-64/64 and MACH4A3/5-256/128 devices.

Nangona kunjalo, unokukhetha ukuba ne-BSCAN kunye ne-ENABLE izikhonkwane eziqhutywa yi-ispEN pin kwintambo. Kulo mzekelo, ispVM/Diamond Programmer kufuneka iqwalaselwe ukuqhuba ispEN isikhonkwane esisezantsi ngolu hlobo lulandelayo:
Ukuqwalasela ispVM/Diamond Programmer ukuqhuba ispEN pin low:

1. Khetha into yemenyu yeeKhetho.
2. Khetha iCable kunye ne-I/O Port Setup.
3. Khetha i-ispEN/BSCAN iPin eQhagamshelweyo ibhokisi yokukhangela.
4. Khetha i Cwangcisa iqhosha lerediyo.

Inqanawa nganye yenkqubo yentambo eneziqhagamshelo ezimbini ezincinci ezikunceda ugcine iiflywires zilungelelanisiwe. Lo mvelisi ulandelayo kunye nenombolo yenxalenye ngumthombo omnye onokwenzeka kwizihlanganisi ezilinganayo:

• 1 x 8 Isiqhagamshelo (ngokomzekeloample, Samtec SSQ-108-02-TS)
• 2 x 5 Isiqhagamshelo (ngokomzekeloample, Samtec SSQ-105-02-TD)

Intambo yeprogram ye-flywire okanye iiheader zenzelwe ukudibanisa kumgangatho we-100-mil iiheader zokubeka izithuba (izikhonkwane zihlukaniswe i-intshi eyi-0.100). I-Lattice incoma i-header kunye nobude be-0.243 intshi okanye i-6.17 mm. Nangona, iiheader zobunye ubude zinokusebenza ngokulinganayo.

Ukuodola Ulwazi

Uluhlu 10.1. Programming Cable Feature Isishwankathelo

Uphawu	HW-USBN-2B	HW-USBN-2A	HW-USB-2A	HW-USB-1A	HW-DLN-3C	HW7265-DL3, HW7265-DL3A, HW-DL-3B, HW-DL-3C	HW7265-DL2	HW7265-DL2A	PDS4102-DL2	PDS4102-DL2A
i-USB	X	X	X	X	—	—	—	—	—	—
I-PC-Parallel	—	—	—	—	X	X	X	X	X	X
1.2 V Inkxaso	X	X	X	—	—	—	—	—	—	—
1.8 V Inkxaso	X	X	X	X	X	X	—	X	—	X
2.5-3.3 V Inkxaso	X	X	X	X	X	X	X	X	X	X
5.0 V Inkxaso	—	X	X	X	X	X	X	X	X	X
2 x 5 Isidibanisi	—	X	X	X	X	X	X	X	—	—
1 x 8 Isidibanisi		X	X	X	X	X	—	—	X	X
Flywire	X	X	X	X	X	X	—	—	—	—
Ulwakhiwo olungenalothi	X	X	—	—	X	—	—	—	—	—
Iyafumaneka ukuze iodolwe	X	—	—	—	X	—	—	—	—	—

Uluhlu 10.2. Ukuodola Ulwazi

Inkcazo	Ukuodola inombolo yeCandelo	Imeko-bume ye-RoHS yaseTshayina- Ixesha lokuSebenzisa eliLungileyo (EFUP)
Intambo yokucwangcisa (i-USB). Iqukethe i-6 'intambo ye-USB, i-flywire connectors, i-8-position (1 x 8) i-adapter kunye ne-10-position (2 x 5) i-adapter, i-lead-free, ukwakhiwa okuhambelana ne-RoHS.	HW-USBN-2B
Intambo yokucwangcisa (iPC kuphela). Iqulathe i-adaptha yezibuko enxuseneyo, i-6′ cable, i-flywire connectors, i-8-position (1 x 8) iadaptha kunye ne-10- isikhundla (2 x 5) i-adapter, i-lead-free, ukwakhiwa okuhambelana ne-RoHS.	HW-DLN-3C

Phawula: Iintambo ezongezelelweyo zichazwe kolu xwebhu ngeenjongo zelifa kuphela, ezi ntambo azisaveliswa. Iintambo ezikhoyo ngoku ukuze ziodolwe zilingana ngokupheleleyo nezinto ezitshintshiweyo.

Isihlomelo A. Ukulungisa i-USB Driver Installation

Kubalulekile ukuba ufakele abaqhubi phambi kokudibanisa iPC yakho kwintambo ye-USB. Ukuba intambo iqhagamshelwe ngaphambi kokufaka abaqhubi, iWindows iya kuzama ukufaka abaqhubi bayo abanokungasebenzi.
Ukuba uzame ukuqhagamshela iPC kwintambo ye-USB ngaphandle kokufaka kuqala abaqhubi abafanelekileyo, okanye ube nengxaki yokunxibelelana neLattice USB cable emva kokufaka abaqhubi, landela la manyathelo angezantsi:

1. Qhoboshela intambo ye-USB yeLattice. Khetha Qala > Useto > Iphaneli yokulawula > Inkqubo.
2. Kwibhokisi yencoko yeePropati zeSixokelelwano, cofa i-Hardware ithebhu kunye noMphathi weSixhobo iqhosha. Ngaphantsi kwabalawuli beBhasi yeSiri yeHlabathi, kuya kufuneka ubone iLattice USB ISP Programmer. Ukuba awuyiboni le nto, khangela iSixhobo esingaziwayo esineflegi emthubi. Cofa kabini kwi icon yesixhobo esingaziwayo.
3. Kwibhokisi yencoko yababini yeePropathi zesixhobo esingaziwayo, cofa Phinda ufake umqhubi.
4. Khetha Khangela ikhompyuter yam kwisoftware yomqhubi.
   Khangela kulawulo lweisptools\ispvmsystem yomqhubi weLattice EzUSB.
   Khangela kwi isptools\ispvmsystem\Drivers\FTDIUSBDriver directory ye FTDI FTUSB driver.
5. Kufakelo lweDayimane, khangela kwi-lscc/diamond/data/vmdata/drivers. Cofa Okulandelayo.
6. Khetha Faka le software yeDriver nokuba kunjalo. Inkqubo ihlaziya umqhubi.
7. Cofa Vala kwaye ugqibezele ukufaka umqhubi we-USB.
8. Phantsi Iphaneli yoLawulo> Inkqubo> Umphathi weSixhobo> Abalawuli beBhasi yeLizwe lonke kufuneka babandakanye oku kulandelayo: Kwi-Lattice EzUSB Driver: Isixhobo se-Lattice USB ISP Programmer sifakiwe.

Kwi-FTDI FTUSB Driver: USB Serial Converter A kunye ne-Converter B izixhobo ezifakiwe

Ukuba ufumana iingxaki okanye ufuna ulwazi olongezelelweyo, qhagamshelana ne-Lattice Technical Support.

Uxhaso lobuchwepheshe

Ngoncedo, ngenisa ityala lenkxaso yobugcisa ku-www.latticesemi.com/techsupport.

Imbali yohlaziyo

Uhlaziyo lwe-26.4, Meyi 2020

Icandelo	Guqula isishwankathelo
IiCables zokucwangcisa	I-Lattice ehlaziyiweyo webikhonkco lesayithi ukuya www.latticesemi.com/programmer.
Inkqubo yesoftware

Uhlaziyo 26.3, Okthobha 2019

Icandelo	Guqula isishwankathelo
Iingqwalasela zoYilo lweBhodi ekujoliswe kuyo; Programming Flywire kunye Connection Reference	Amaxabiso eVCC acacisiweyo axhaswa yi-I2C interface. Amanqaku ongeziweyo kwiThebhile 6.1.

Uhlaziyo lwe-26.2, Meyi 2019

Icandelo	Guqula isishwankathelo
—	Icandelo elongeziweyo leZityalo zokuziQwalasela.
Inkqubo yeFlywire kunye neReferensi yoQhagamshelwano	ITheyibhile eHlaziyiweyo 6.1. I-Pin kunye neReferensi yeCable. Yongezwe iMachXO3D Yongezwe CRESET_B kwi-Crosslink I2C. Izinto ezihlaziyiweyo phantsi kwe-I2C Port Devices · Umphathi weQonga elongezelelweyo II. · Ulungelelwaniso olutshintshileyo lwe-ispPAC. Izinto ezihlaziyiweyo phantsi kwe-I2C Port Devices. · Utshintshe uMphathi waMandla II waba nguMphathi wePlatform II kunye nohlaziyo lwe-I2C: ixabiso leSDA. · Kutshintshwe i-ASC ukuya kwi-L-ASC10 Uhlaziyo olusemazantsi e-4 ukuze lubandakanye izixhobo ze-ispClock. Iimpawu zokuthengisa ezilungisiweyo.
Imbali yohlaziyo	Ifomati ehlaziyiweyo.
Ikhava yangasemva	itemplate ehlaziyiweyo.
—	Utshintsho oluncinci lokuhlela

Uhlaziyo lwe-26.1, Meyi 2018

Icandelo	Guqula isishwankathelo
Konke	Ungeniso olulungisiweyo kwicandelo leZixhobo ze-Slave SPI Port kwiTheyibhuli 6.1.

Uhlaziyo 26.0, April 2018

Icandelo	Guqula isishwankathelo
Konke	Inombolo yoxwebhu etshintshiweyo ukusuka kwi-UG48 ukuya kwi-FPGA-UG-02024. Ithempleyithi yoxwebhu oluhlaziyiweyo.
IiCables zokucwangcisa	Susa ulwazi olungafunekiyo kwaye utshintshe ikhonkco ku-www/latticesemi.com/software.
Programming Cable Pin Iingcaciso	Amagama ePin yeCable yeNkqubo eHlaziyiweyo kwiThebhile 3.1. Programming Cable Pin Iingcaciso.
Inkqubo yeFlywire kunye neReferensi yoQhagamshelwano	ITheyibhile eTshintshwayo 2. I-Flywire Conversion Reference kunye neTheyibhile 3 eCetyisiweyo yoQhagamshelwano lwePini kunye neTheyibhuli enye 6.1 iPin kunye neCable Reference.
Ukuodola Ulwazi	Itheyibhile ehanjisiweyo 10.1. IsiShwankathelo seNdawo yeCable yeNkqubo phantsi koLwazi loku-odola.

Uhlaziyo 25.0, Novemba 2016

Icandelo	Guqula isishwankathelo
Inkqubo yeFlywire kunye neReferensi yoQhagamshelwano	ITheyibhile ehlaziyiweyo ye-3, i-Pin Connections ezicetyiswayo. Isixhobo esongeziweyo se-CrossLink.

Uhlaziyo 24.9, Okthobha 2015

Icandelo	Guqula isishwankathelo
Inkqubo yeFlywire kunye neReferensi yoQhagamshelwano	ITheyibhile ehlaziyiweyo ye-3, i-Pin Connections ezicetyiswayo. Kongezwe ikholamu ye-CRESET-B. Isixhobo songeziwe se-ICE40 UltraLite.
Uncedo lweNkxaso yobuGcisa	Ulwazi oluhlaziyiweyo loNcedo lweNkxaso yobuGcisa.

Uhlaziyo 24.8, Matshi 2015

Icandelo	Guqula isishwankathelo
Programming Cable Pin Iingcaciso	Inkcazo ehlaziyiweyo ye-INIT kwiThebhile 1, iCableing Cable Pin Definitions.

Uhlaziyo 24.7, January 2015

Icandelo	Guqula isishwankathelo
Programming Cable Pin Iingcaciso	KwiThebhile 1, iProgramming Cable Pin Definitions, ispEN/Enable/PROG itshintshile ibe ispEN/Enable/PROG/SN kunye nenkcazo yayo ihlaziywe. Umzobo ohlaziyiweyo we-2, iCable yokuCwangcisa kwiNkqubo yeNkqubo yeNkqubo ye-PC (HW-USBN-2B).
Inkqubo yeCable Cable ispEN Pin	KwiThebhile 4, isiShwankathelo seNdlela yeCable yeNkqubo, i-HW-USBN-2B ephawulwe njengekhoyo ukuze iodolwe.
Ukuodola Ulwazi	I-HW-USBN-2A itshintshelwe kwi-HW- USBN-2B.

Uhlaziyo 24.6, kaJulayi 2014

Icandelo	Guqula isishwankathelo
Konke	Isihloko soxwebhu esitshintshiweyo sisuka ku-ispKLANDELA iiNcingo ukuya kwiSikhokelo soMsebenzisi weeNtambo zokuSebenza.
Programming Cable Pin Iingcaciso	Itheyibhile ehlaziyiweyo yesi-3, uQhagamshelwano lwePin olucetyiswayo. I-ECP5 eyongeziweyo, i-ICE40LM, i-ICE40 Ultra, kunye neentsapho zesixhobo se-MachXO3.
Iingqwalasela zoYilo lweBhodi ekujoliswe kuyo	Icandelo elihlaziyiweyo. Ikhonkco le-FAQ ehlaziyiweyo kulawulo lwesixhobo se-ispVM somjikelo womsebenzi we-TCK kunye/okanye amaxesha amaninzi.
Uncedo lweNkxaso yobuGcisa	Ulwazi oluhlaziyiweyo loNcedo lweNkxaso yobuGcisa.

Uhlaziyo 24.5, Okthobha 2012

Icandelo	Guqula isishwankathelo
Inkqubo yeFlywire kunye neReferensi yoQhagamshelwano	Yongezwe i-iCE40 yoqwalaselo lwezibuko amagama kwitafile yeReferensi yeFlywire.
Inkqubo yeFlywire kunye neReferensi yoQhagamshelwano	Kongezwe ulwazi lwe-ICE40 kwitheyibhile eCetyisiweyo yoQhagamshelwano lweCable.

Uhlaziyo 24.4, ngoFebruwari 2012

Icandelo	Guqula isishwankathelo
Konke	Uxwebhu oluhlaziyiweyo kunye nelogo entsha yeshishini.

Uhlaziyo 24.3, Novemba 2011

Icandelo	Guqula isishwankathelo
Konke	Uxwebhu lugqithiselwe kwifomathi yesikhokelo somsebenzisi.
Iimbonakalo	Umzobo owongeziweyo Ikhebula le-USB - HW-USBN-2A.
Inkqubo yeFlywire kunye neReferensi yoQhagamshelwano	Itheyibhile eHlaziyiweyo yoQhagamshelo lweCable yezixhobo ze-MachXO2.
Iingqwalasela zoYilo lweBhodi ekujoliswe kuyo	Icandelo elihlaziyiweyo.
Isihlomelo A	Icandelo elongeziweyo.

Uhlaziyo 24.2, Okthobha 2009

Icandelo	Guqula isishwankathelo
Konke	Ulwazi olongeziweyo olunxulumene neenkcukacha eziphathekayo ze-flywire connectors.

Uhlaziyo 24.1, kaJulayi 2009

Icandelo	Guqula isishwankathelo
Konke	Eyongeziweyo iBhodi ekuJoliswe kuyo icandelo leeNgqwalaselo zoyilo.
Inkqubo yeFlywire kunye neReferensi yoQhagamshelwano	Kongezwe isihloko secandelo.

Uhlaziyo lwangaphambili

Icandelo	Guqula isishwankathelo
—	Ukukhutshwa kwangaphambili kweLattice.

www.latticesemi.com

Amaxwebhu / Izibonelelo

I-LATTICE FPGA-UG-02042-26.4 iiCables Programming [pdf] Isikhokelo somsebenzisi I-FPGA-UG-02042-26.4 iiCables Programming, FPGA-UG-02042-26.4, iiCableing Cables, iiCables

Iimbekiselo

• Incwadi yokusebenzisa